@incollection{MacdonaldMcGrathAppourchauxetal.2014,
  author    = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, W. and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a solar polar mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  editor    = {Macdonald, Malcolm},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-642-34906-5},
  doi       = {10.1007/978-3-642-34907-2_17},
  pages     = {243 -- 257},
  year      = {2014},
  abstract  = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.},
  language  = {en}
}
@incollection{PriedeFerrein2013,
  author    = {Priede, Gareth and Ferrein, Alexander},
  title     = {Towards passive walking for the fully-actuated biped robot Nao},
  series = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)},
  booktitle = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)},
  publisher = {Springer},
  address   = {New York, NY},
  isbn      = {978-1-4614-3557-0 ; 978-1-4614-3558-7},
  doi       = {10.1007/978-1-4614-3558-7_18},
  pages     = {225 -- 236},
  year      = {2013},
  abstract  = {Many biped robots deploy a form of gait that follows the zero moment point (ZMP) approach, that is, the robot is in a stable position at any point in time. This requires the robot to be fully actuated. While very stable, the draw-backs of this approach are a fairly slow gait and high energy consumption. An alternative approach is the so-called passive-dynamic walking, where the gait makes use of the inertia and dynamic stability of the robot. In this paper we describe our ongoing work of combining the principles of passive-dynamic walking on the fully-actuated biped robot Nao, which is also deployed for robotic soccer applications. We present a simple controller that allows the robot to stably rock sidewards, showing a closed limit-cycle. We discuss first results of superimposing a forward motion on the sidewards motion. Based on this we expect to endow the Nao with a fast, robust, and stable passive-dynamic walk on the fully-actuated Nao in the future.},
  language  = {en}
}
@incollection{GligorevicEppleSchnell2011,
  author    = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael},
  title     = {The LDACS1 physical layer design},
  series = {Future aeronautical communications},
  booktitle = {Future aeronautical communications},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-307-625-6},
  pages     = {317 -- 332},
  year      = {2011},
  language  = {en}
}
@incollection{KirchnerReisertSchoening2014,
  author    = {Kirchner, Patrick and Reisert, Steffen and Sch{\"o}ning, Michael Josef},
  title     = {Calorimetric gas sensors for hydrogen peroxide monitoring in aseptic food processes},
  series = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)},
  booktitle = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-54518-4 (Print) ; 978-3-642-54519-1 (Online)},
  doi       = {10.1007/5346_2013_51},
  pages     = {279 -- 309},
  year      = {2014},
  abstract  = {For the sterilisation of aseptic food packages it is taken advantage of the microbicidal properties of hydrogen peroxide (H2O2). Especially, when applied in vapour phase, it has shown high potential of microbial inactivation. In addition, it offers a high environmental compatibility compared to other chemical sterilisation agents, as it decomposes into oxygen and water, respectively. Due to a lack in sensory detection possibilities, a continuous monitoring of the H2O2 concentration was recently not available. Instead, the sterilisation efficacy is validated using microbiological tests. However, progresses in the development of calorimetric gas sensors during the last 7 years have made it possible to monitor the H2O2 concentration during operation. This chapter deals with the fundamentals of calorimetric gas sensing with special focus on the detection of gaseous hydrogen peroxide. A sensor principle based on a calorimetric differential set-up is described. Special emphasis is given to the sensor design with respect to the operational requirements under field conditions. The state-of-the-art regarding a sensor set-up for the on-line monitoring and secondly, a miniaturised sensor for in-line monitoring are summarised. Furthermore, alternative detection methods and a novel multi-sensor system for the characterisation of aseptic sterilisation processes are described.},
  language  = {en}
}
@incollection{SchoeningPoghossianGluecketal.2014,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Gl{\"u}ck, Olaf and Thust, Marion},
  title     = {Electrochemical methods for the determination of chemical variables in aqueous media},
  series = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement},
  booktitle = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla.},
  isbn      = {978-1-4398-4891-3},
  pages     = {55-1 -- 55-54},
  year      = {2014},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@incollection{Pietsch2013,
  author    = {Pietsch, Wolfram},
  title     = {A framework for strategic positioning of IT-products},
  series = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  booktitle = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-39336-5_11},
  pages     = {102 -- 116},
  year      = {2013},
  abstract  = {IT Products are viewed and managed differently depending on the perspectives and the stage within the life cycle. A model is presented that integrates different perspectives and stages serving as an aid for the analysis of business models and focused positioning of IT-products. Four generic business models are analysed with regard to the product management function in general and the positioning field for IT-products specifically: off-the-shelf (license), license plus service, project, and system service (incl. cloud computing).},
  language  = {en}
}
@incollection{NiemuellerEwertReuteretal.2014,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed},
  series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  publisher = {Springer},
  address   = {Berlin},
  organization    = {RoboCup International Symposium <17, 2013, Eindhoven>},
  isbn      = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)},
  pages     = {336 -- 347},
  year      = {2014},
  abstract  = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.},
  language  = {en}
}
@incollection{KnottSofroniaGerressenetal.2014,
  author    = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.},
  title     = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy},
  series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12057-7 (Online)},
  doi       = {10.1007/978-3-319-12057-7_1},
  pages     = {1 -- 10},
  year      = {2014},
  abstract  = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.},
  language  = {en}
}
@incollection{AlhwarinFerreinScholl2014,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {IR stereo kinect: improving depth images by combining structured light with IR stereo},
  series = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)},
  booktitle = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)},
  publisher = {Springer},
  address   = {M{\"u}nchen},
  isbn      = {978-3-319-13559-5 (Print) ; 978-3-319-13560-1 (E-Book)},
  doi       = {10.1007/978-3-319-13560-1_33},
  pages     = {409 -- 421},
  year      = {2014},
  abstract  = {RGB-D sensors such as the Microsoft Kinect or the Asus Xtion are inexpensive 3D sensors. A depth image is computed by calculating the distortion of a known infrared light (IR) pattern which is projected into the scene. While these sensors are great devices they have some limitations. The distance they can measure is limited and they suffer from reflection problems on transparent, shiny, or very matte and absorbing objects. If more than one RGB-D camera is used the IR patterns interfere with each other. This results in a massive loss of depth information. In this paper, we present a simple and powerful method to overcome these problems. We propose a stereo RGB-D camera system which uses the pros of RGB-D cameras and combine them with the pros of stereo camera systems. The idea is to utilize the IR images of each two sensors as a stereo pair to generate a depth map. The IR patterns emitted by IR projectors are exploited here to enhance the dense stereo matching even if the observed objects or surfaces are texture-less or transparent. The resulting disparity map is then fused with the depth map offered by the RGB-D sensor to fill the regions and the holes that appear because of interference, or due to transparent or reflective objects. Our results show that the density of depth information is increased especially for transparent, shiny or matte objects.},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@incollection{FissabreNiethammer2011,
  author    = {Fissabre, Anke and Niethammer, Bernd},
  title     = {Early Glazed Curtain Walls and their Preservation},
  series = {Il vetro nell'architettura del XX secolo : conservazione e restauro = Glass in the 20th Century Architecture : Preservation and Restoration},
  booktitle = {Il vetro nell'architettura del XX secolo : conservazione e restauro = Glass in the 20th Century Architecture : Preservation and Restoration},
  editor    = {Graf, Franz},
  publisher = {Mendrisio Academy Press},
  address   = {Mendrisio},
  isbn      = {9788887624502},
  pages     = {185 -- 199},
  year      = {2011},
  language  = {en}
}
@incollection{RebelHueningScholletal.2015,
  author    = {Rebel, S{\"o}ren and H{\"u}ning, Felix and Scholl, Ingrid and Ferrein, Alexander},
  title     = {MQOne: Low-cost design for a rugged-terrain robot platform},
  series = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  booktitle = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)},
  doi       = {10.1007/978-3-319-22876-1_19},
  pages     = {209 -- 221},
  year      = {2015},
  abstract  = {Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.},
  language  = {en}
}
@incollection{KuemmellHillgaertner2015,
  author    = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael},
  title     = {Inductive charging comfortable and nonvisible charging stations for urbanised areas},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_16},
  pages     = {297 -- 309},
  year      = {2015},
  abstract  = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.},
  language  = {en}
}
@incollection{RahierRitzWallenborn2015,
  author    = {Rahier, Michael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Information and communication technology for integrated mobility concepts such as E-carsharing},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_17},
  pages     = {311 -- 326},
  year      = {2015},
  abstract  = {During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users' new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.},
  language  = {en}
}
@incollection{BusseEschMuntaniol2015,
  author    = {Busse, Daniel and Esch, Thomas and Muntaniol, Roman},
  title     = {Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_18},
  pages     = {327 -- 343},
  year      = {2015},
  abstract  = {The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.},
  language  = {en}
}
@incollection{SeiblerSchwenk2010,
  author    = {Seibler, Jost and Schwenk, Frieder},
  title     = {Transgenic RNAi Applications in the Mouse},
  series = {Methods in Enzymology : Guide to Techniques in Mouse Development, Part B: Mouse Molecular Genetics. 2nd Edition},
  booktitle = {Methods in Enzymology : Guide to Techniques in Mouse Development, Part B: Mouse Molecular Genetics. 2nd Edition},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-384880-2},
  pages     = {367 -- 386},
  year      = {2010},
  language  = {en}
}
@incollection{PoghossianSchusserBaeckeretal.2015,
  author    = {Poghossian, Arshak and Schusser, Sebastian and B{\"a}cker, M. and Leinhos, Marcel and Sch{\"o}ning, Michael Josef},
  title     = {Real-time in-situ electrical monitoring of the degradation of biopolymers using semiconductor field-effect devices},
  series = {Biodegradable biopolymers. Vol. 1},
  booktitle = {Biodegradable biopolymers. Vol. 1},
  publisher = {Nova Science Publ.},
  address   = {Hauppauge},
  isbn      = {978-1-63483-632-6},
  pages     = {135 -- 153},
  year      = {2015},
  language  = {en}
}
@incollection{DigelSadykovTemizArtmannetal.2015,
  author    = {Digel, Ilya and Sadykov, R. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Changes in intestinal microflora in rats induced by oral exposure to low lead (II) concentrations},
  series = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies},
  booktitle = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies},
  publisher = {Nova Science Publ.},
  isbn      = {9781634826990},
  pages     = {75 -- 99},
  year      = {2015},
  language  = {en}
}
@incollection{EversFleischhakerPalffyetal.2010,
  author    = {Evers, J{\"o}rg and Fleischhaker, Robert and P{\´a}lffy, A. and Keitel, C.},
  title     = {Light propagation : From atomic to nuclear quantum optics},
  series = {Modern optics and photonics: atoms and structured media},
  booktitle = {Modern optics and photonics: atoms and structured media},
  publisher = {World Scientific Publishing Co.},
  isbn      = {978-981431327-8},
  doi       = {10.1142/9789814313278_0001},
  pages     = {3 -- 15},
  year      = {2010},
  language  = {en}
}
@incollection{KochPoghossianWegeetal.2018,
  author    = {Koch, Claudia and Poghossian, Arshak and Wege, Christina and Sch{\"o}ning, Michael Josef},
  title     = {TMV-Based Adapter Templates for Enhanced Enzyme Loading in Biosensor Applications},
  series = {Virus-Derived Nanoparticles for Advanced Technologies},
  booktitle = {Virus-Derived Nanoparticles for Advanced Technologies},
  editor    = {Wege, Christina},
  publisher = {Humana Press},
  address   = {New York, NY},
  isbn      = {978-1-4939-7808-3},
  doi       = {10.1007/978-1-4939-7808-3},
  pages     = {553 -- 568},
  year      = {2018},
  abstract  = {Nanotubular tobacco mosaic virus (TMV) particles and RNA-free lower-order coat protein (CP) aggregates have been employed as enzyme carriers in different diagnostic layouts and compared for their influence on biosensor performance. In the following, we describe a label-free electrochemical biosensor for improved glucose detection by use of TMV adapters and the enzyme glucose oxidase (GOD). A specific and efficient immobilization of streptavidin-conjugated GOD ([SA]-GOD) complexes on biotinylated TMV nanotubes or CP aggregates was achieved via bioaffinity binding. Glucose sensors with adsorptively immobilized [SA]-GOD, and with [SA]-GOD cross-linked with glutardialdehyde, respectively, were tested in parallel on the same sensor chip. Comparison of these sensors revealed that TMV adapters enhanced the amperometric glucose detection remarkably, conveying highest sensitivity, an extended linear detection range and fastest response times. These results underline a great potential of an integration of virus/biomolecule hybrids with electronic transducers for applications in biosensorics and biochips. Here, we describe the fabrication and use of amperometric sensor chips combining an array of circular Pt electrodes, their loading with GOD-modified TMV nanotubes (and other GOD immobilization methods), and the subsequent investigations of the sensor performance.},
  language  = {en}
}
@incollection{ArtmannMeruvuKizildagetal.2018,
  author    = {Artmann, Gerhard and Meruvu, Haritha and Kizildag, Sefa and Temiz Artmann, Ayseg{\"u}l},
  title     = {Functional Toxicology and Pharmacology Test of Cell Induced Mechanical Tensile Stress in 2D and 3D Tissue Cultures},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_7},
  pages     = {157 -- 192},
  year      = {2018},
  abstract  = {Mechanical forces/tensile stresses are critical determinants of cellular growth, differentiation and migration patterns in health and disease. The innovative "CellDrum technology" was designed for measuring mechanical tensile stress of cultured cell monolayers/thin tissue constructs routinely. These are cultivated on very thin silicone membranes in the so-called CellDrum. The cell layers adhere firmly to the membrane and thus transmit the cell forces generated. A CellDrum consists of a cylinder which is sealed from below with a 4 μm thick, biocompatible, functionalized silicone membrane. The weight of cell culture medium bulbs the membrane out downwards. Membrane indentation is measured. When cells contract due to drug action, membrane, cells and medium are lifted upwards. The induced indentation changes allow for lateral drug induced mechanical tension quantification of the micro-tissues. With hiPS-induced (human) Cardiomyocytes (CM) the CellDrum opens new perspectives of individualized cardiac drug testing. Here, monolayers of self-beating hiPS-CMs were grown in CellDrums. Rhythmic contractions of the hiPS-cells induce membrane up-and-down deflections. The recorded cycles allow for single beat amplitude, single beat duration, integration of the single beat amplitude over the beat time and frequency analysis. Dose effects of agonists and antagonists acting on Ca2+ channels were sensitively and highly reproducibly observed. Data were consistent with published reference data as far as they were available. The combination of the CellDrum technology with hiPS-Cardiomyocytes offers a fast, facile and precise system for pharmacological and toxicological studies. It allows new preclinical basic as well as applied research in pharmacolgy and toxicology.},
  language  = {en}
}
@incollection{DuongSeifarthTemizArtmannetal.2018,
  author    = {Duong, Minh Tuan and Seifarth, Volker and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Staat, Manfred},
  title     = {Growth Modelling Promoting Mechanical Stimulation of Smooth Muscle Cells of Porcine Tubular Organs in a Fibrin-PVDF Scaffold},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_9},
  pages     = {209 -- 232},
  year      = {2018},
  abstract  = {Reconstructive surgery and tissue replacements like ureters or bladders reconstruction have been recently studied, taking into account growth and remodelling of cells since living cells are capable of growing, adapting, remodelling or degrading and restoring in order to deform and respond to stimuli. Hence, shapes of ureters or bladders and their microstructure change during growth and these changes strongly depend on external stimuli such as training. We present the mechanical stimulation of smooth muscle cells in a tubular fibrin-PVDFA scaffold and the modelling of the growth of tissue by stimuli. To this end, mechanotransduction was performed with a kyphoplasty balloon catheter that was guided through the lumen of the tubular structure. The bursting pressure was examined to compare the stability of the incubated tissue constructs. The results showed the significant changes on tissues with training by increasing the burst pressure as a characteristic mechanical property and the smooth muscle cells were more oriented with uniformly higher density. Besides, the computational growth models also exhibited the accurate tendencies of growth of the cells under different external stimuli. Such models may lead to design standards for the better layered tissue structure in reconstructing of tubular organs characterized as composite materials such as intestines, ureters and arteries.},
  language  = {en}
}
@incollection{FrotscherStaat2018,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Towards Patient-Specific Computational Modeling of hiPS-Derived Cardiomyocyte Function and Drug Action},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_10},
  pages     = {233 -- 250},
  year      = {2018},
  abstract  = {Human-induced pluripotent stem cell-derived cardiomyocytes (hiPS-CM) today are widely used for the investigation of normal electromechanical cardiac function, of cardiac medication and of mutations. Computational models are thus established that simulate the behavior of this kind of cells. This section first motivates the modeling of hiPS-CM and then presents and discusses several modeling approaches of microscopic and macroscopic constituents of human-induced pluripotent stem cell-derived and mature human cardiac tissue. The focus is led on the mapping of the computational results one can achieve with these models onto mature human cardiomyocyte models, the latter being the real matter of interest. Model adaptivity is the key feature that is discussed because it opens the way for modeling various biological effects like biological variability, medication, mutation and phenotypical expression. We compare the computational with experimental results with respect to normal cardiac function and with respect to inotropic and chronotropic drug effects. The section closes with a discussion on the status quo of the specificity of computational models and on what challenges have to be solved to reach patient-specificity.},
  language  = {en}
}
@incollection{DigelAkimbekovKistaubayevaetal.2018,
  author    = {Digel, Ilya and Akimbekov, Nuraly S. and Kistaubayeva, Aida and Zhubanova, Azhar A.},
  title     = {Microbial Sampling from Dry Surfaces: Current Challenges and Solutions},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_19},
  pages     = {421 -- 456},
  year      = {2018},
  abstract  = {Sampling of dry surfaces for microorganisms is a main component of microbiological safety and is of critical importance in many fields including epidemiology, astrobiology as well as numerous branches of medical and food manufacturing. Aspects of biofilm formation, analysis and removal in aqueous solutions have been thoroughly discussed in literature. In contrast, microbial communities on air-exposed (dry) surfaces have received significantly less attention. Diverse surface sampling methods have been developed in order to address various surfaces and microbial groups, but they notoriously show poor repeatability, low recovery rates and suffer from lack of mutual consistency. Quantitative sampling for viable microorganisms represents a particular challenge, especially on porous and irregular surfaces. Therefore, it is essential to examine in depth the factors involved in microorganisms' recovery efficiency and accuracy depending on the sampling technique used. Microbial colonization, retention and community composition on different dry surfaces are very complex and rely on numerous physicochemical and biological factors. This study is devoted to analyze and review the (a) physical phenomena and intermolecular forces relevant for microbiological surface sampling; (b) challenges and problems faced by existing sampling methods for viable microorganisms and (c) current directions of engineering and research aimed at improvement of quality and efficiency of microbiological surface sampling.},
  language  = {en}
}
@incollection{WagemannTippkoetter2018,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries: a short introduction},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_4},
  pages     = {1 -- 11},
  year      = {2018},
  abstract  = {The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.},
  language  = {en}
}
@incollection{DuweTippkoetterUlber2018,
  author    = {Duwe, A. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulose-Biorefinery: Ethanol-Focused},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  doi       = {10.1007/10_2016_72},
  pages     = {177 -- 215},
  year      = {2018},
  abstract  = {The development prospects of the world markets for petroleum and other liquid fuels are diverse and partly contradictory. However, comprehensive changes for the energy supply of the future are essential. Notwithstanding the fact that there are still very large deposits of energy resources from a geological point of view, the finite nature of conventional oil reserves is indisputable. To reduce our dependence on oil, the EU, the USA, and other major economic zones rely on energy diversification. For this purpose, alternative materials and technologies are being sought, and is most obvious in the transport sector. The objective is to progressively replace fossil fuels with renewable and more sustainable fuels. In this respect, biofuels have a pre-eminent position in terms of their capability of blending with fossil fuels and being usable in existing cars without substantial modification. Ethanol can be considered as the primary renewable liquid fuel. In this chapter enzymes, micro-organisms, and processes for ethanol production based on renewable resources are described.},
  language  = {en}
}
@incollection{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, Michael},
  title     = {Probabilistic limit and shakedown problems},
  series = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems},
  volume    = {15},
  booktitle = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems},
  editor    = {Staat, Manfred and Heitzer, Michael},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  pages     = {217 -- 268},
  year      = {2003},
  language  = {en}
}
@incollection{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Mechanics of soft tissue reactions to textile mesh implants},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_11},
  pages     = {251 -- 275},
  year      = {2018},
  abstract  = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.},
  language  = {en}
}
@incollection{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Big Data Research - How to Structure the Changes of the Past Decade?},
  series = {The Art of Structuring},
  booktitle = {The Art of Structuring},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-06234-7},
  doi       = {10.1007/978-3-030-06234-7_26},
  pages     = {271 -- 281},
  year      = {2019},
  abstract  = {In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.},
  language  = {en}
}
@incollection{DachwaldOhndorf2019,
  author    = {Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Global optimization of continuous-thrust trajectories using evolutionary neurocontrol},
  series = {Modeling and Optimization in Space Engineering},
  booktitle = {Modeling and Optimization in Space Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-10501-3},
  doi       = {10.1007/978-3-030-10501-3_2},
  pages     = {33 -- 57},
  year      = {2019},
  abstract  = {Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.},
  language  = {en}
}
@incollection{WolfKapelyukhScheeretal.2015,
  author    = {Wolf, C. Roland and Kapelyukh, Yury and Scheer, Nico and Henderson, Colin J.},
  title     = {Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs},
  editor    = {Wilson, Alan G. E.},
  publisher = {RSC Publ.},
  address   = {Cambridge},
  isbn      = {978-1-78262-778-4},
  doi       = {10.1039/9781782622376-00152},
  pages     = {152 -- 176},
  year      = {2015},
  abstract  = {The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.},
  language  = {en}
}
@incollection{HendersonWolfScheer2009,
  author    = {Henderson, Colin J. and Wolf, C. Roland and Scheer, Nico},
  title     = {The use of transgenic animals to study drug metabolism},
  series = {Handbook of Drug Metabolism. 2nd Edition},
  booktitle = {Handbook of Drug Metabolism. 2nd Edition},
  editor    = {Woolf, Thomas F.},
  publisher = {Informa Healthcare},
  address   = {New York},
  isbn      = {978-1-4200-7647-9},
  pages     = {637 -- 658},
  year      = {2009},
  language  = {en}
}
@incollection{FranzenSteckenPfaffetal.2019,
  author    = {Franzen, Julian and Stecken, Jannis and Pfaff, Raphael and Kuhlenk{\"o}tter, Bernd},
  title     = {Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System},
  series = {Advances in Production, Logistics and Traffic},
  booktitle = {Advances in Production, Logistics and Traffic},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-13535-5},
  doi       = {10.1007/978-3-030-13535-5_19},
  pages     = {265 -- 276},
  year      = {2019},
  abstract  = {In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.},
  language  = {en}
}
@incollection{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_3},
  pages     = {153 -- 196},
  year      = {2019},
  abstract  = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.},
  language  = {en}
}
@incollection{SamuelssonScheerWilsonetal.2017,
  author    = {Samuelsson, K. and Scheer, Nico and Wilson, I. and Wolf, C.R. and Henderson, C.J.},
  title     = {Genetically Humanized Animal Models},
  series = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  booktitle = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  editor    = {Chackalamannil, Samuel},
  publisher = {Elsevier},
  address   = {Saint Louis},
  isbn      = {978-0-12-803201-5},
  doi       = {10.1016/B978-0-12-409547-2.12376-5},
  pages     = {130 -- 149},
  year      = {2017},
  abstract  = {Genetically humanized mice for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging as promising in vivo models for improved prediction of the pharmacokinetic, drug-drug interaction, and safety characteristics of compounds in humans. This is an overview on the genetically humanized and chimeric liver-humanized mouse models, which are illustrated with examples of their utility in drug metabolism and toxicity studies. The models are compared to give guidance for selection of the most appropriate model by highlighting advantages and disadvantages to be carefully considered when used for studies in drug discovery and development.},
  language  = {en}
}
@incollection{ScheerChuSalphatietal.2016,
  author    = {Scheer, Nico and Chu, Xiaoyan and Salphati, Laurent and Zamek-Gliszczynski, Maciej J.},
  title     = {Knockout and humanized animal models to study membrane transporters in drug development},
  series = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  booktitle = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  editor    = {Nicholls, Glynis},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  isbn      = {978-1-78262-379-3},
  doi       = {10.1039/9781782623793-00298},
  pages     = {298 -- 332},
  year      = {2016},
  language  = {en}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@incollection{IbanezSanchezWolf2020,
  author    = {Ibanez-Sanchez, Gema and Wolf, Martin},
  title     = {Interactive Process Mining-Induced Change Management Methodology for Healthcare},
  series = {Interactive Process Mining in Healthcare},
  booktitle = {Interactive Process Mining in Healthcare},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-53993-1 (Online)},
  doi       = {10.1007/978-3-030-53993-1_16},
  pages     = {267 -- 293},
  year      = {2020},
  abstract  = {The adoption of the Digital Health Transformation is a tremendous paradigm change in health organizations, which is not a trivial process in reality. For that reason, in this chapter, it is proposed a methodology with the objective to generate a changing culture in healthcare organisations. Such a change culture is essential for the successful implementation of any supporting methods like Interactive Process Mining. It needs to incorporate (mostly) new ways of team-based and evidence-based approaches for solving structural problems in a digital healthcare environment.},
  language  = {en}
}
@incollection{BozakovSander2013,
  author    = {Bozakov, Zdravko and Sander, Volker},
  title     = {OpenFlow: A Perspective for Building Versatile Networks},
  series = {Network-Embedded Management and Applications},
  booktitle = {Network-Embedded Management and Applications},
  publisher = {Springer},
  address   = {New York, NY},
  isbn      = {978-1-4419-6769-5},
  doi       = {10.1007/978-1-4419-6769-5_11},
  pages     = {217 -- 245},
  year      = {2013},
  language  = {en}
}
@incollection{FateriGebhardt2020,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Introduction to Additive Manufacturing},
  series = {3D Printing of Optical Components},
  booktitle = {3D Printing of Optical Components},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-58960-8},
  doi       = {10.1007/978-3-030-58960-8_1},
  pages     = {1 -- 22},
  year      = {2020},
  abstract  = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.},
  language  = {en}
}
@incollection{ButenwegHoltschoppen2019,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of structures and components in industrial units},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5_5},
  pages     = {359 -- 481},
  year      = {2019},
  abstract  = {Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.},
  language  = {en}
}
@incollection{GiresiniButenweg2019,
  author    = {Giresini, Linda and Butenweg, Christoph},
  title     = {Earthquake resistant design of structures according to Eurocode 8},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_4},
  pages     = {197 -- 358},
  year      = {2019},
  abstract  = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.},
  language  = {en}
}
@incollection{GebhardtHoetter2019,
  author    = {Gebhardt, Andreas and Hoetter, Jan-Steffen},
  title     = {Rapid Tooling},
  series = {CIRP Encyclopedia of Production Engineering},
  booktitle = {CIRP Encyclopedia of Production Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-53120-4},
  doi       = {10.1007/978-3-662-53120-4},
  pages     = {39 -- 52},
  year      = {2019},
  language  = {en}
}
@incollection{AkimbekovDigelRazzaque2022,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and Razzaque, Mohammed S.},
  title     = {Role of vitamins in maintaining structure and function of intestinal microbiome},
  series = {Comprehensive Gut Microbiota},
  booktitle = {Comprehensive Gut Microbiota},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-822036-8},
  doi       = {10.1016/B978-0-12-819265-8.00043-7},
  pages     = {320 -- 334},
  year      = {2022},
  abstract  = {The recent advances in microbiology have shed light on understanding the role of vitamins beyond the nutritional range. Vitamins are critical in contributing to healthy biodiversity and maintaining the proper function of gut microbiota. The sharing of vitamins among bacterial populations promotes stability in community composition and diversity; however, this balance becomes disturbed in various pathologies. Here, we overview and analyze the ability of different vitamins to selectively and specifically induce changes in the intestinal microbial community. Some schemes and regularities become visible, which may provide new insights and avenues for therapeutic management and functional optimization of the gut microbiota.},
  language  = {en}
}
@incollection{DuongNguyenStaat2017,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Physical response of hyperelastic models for composite materials and soft tissues},
  series = {Advances in Composite Material},
  booktitle = {Advances in Composite Material},
  publisher = {Scientific Research Publishing},
  address   = {Wuhan},
  isbn      = {978-1-61896-300-0 (Hardcover), 978-1-61896-299-7 (Paperback)},
  pages     = {316},
  year      = {2017},
  language  = {en}
}
@incollection{HahnKellyMuffleretal.2011,
  author    = {Hahn, Thomas and Kelly, Svenja and Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Extraction of lignocellulose and algae for the production of bulk and fine chemicals},
  series = {Industrial scale natural products extraction},
  booktitle = {Industrial scale natural products extraction},
  editor    = {Hans-J{\"o}rg, Bart and Pilz, Stephan},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {978-3-527-32504-7 (Print)},
  doi       = {10.1002/9783527635122},
  pages     = {221 -- 245},
  year      = {2011},
  language  = {en}
}
@incollection{MufflerPothSiekeretal.2011,
  author    = {Muffler, Kai and Poth, Sabastian and Sieker, Tim and Tippk{\"o}tter, Nils and Ulber, Roland and Sell, Dieter},
  title     = {Bio-feedstocks},
  series = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  booktitle = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  editor    = {Moo-Young, Murray},
  edition   = {2. edition},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-444-53352-4},
  doi       = {10.1016/B978-0-08-088504-9.00088-X},
  pages     = {93 -- 101},
  year      = {2011},
  language  = {en}
}
@incollection{MufflerTippkoetterUlber2010,
  author    = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Chemical feedstocks and fine chemicals from other substrates},
  series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  editor    = {Timmis, Kenneth N.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-77588-1},
  doi       = {10.1007\%2F978-3-540-77587-4_214},
  pages     = {2891 -- 2902},
  year      = {2010},
  language  = {en}
}
@incollection{BarnatBosseTight2017,
  author    = {Barnat, Miriam and Bosse, Elke and Tight, Malcolm},
  title     = {The Guiding Role of Theory in Mixed-Methods Research: Combining Individual and Institutional Perspectives on the Transition to Higher Education},
  series = {Theory and Method in Higher Education Research. Vol 3},
  booktitle = {Theory and Method in Higher Education Research. Vol 3},
  publisher = {Emerald Publishing Limited},
  isbn      = {978-1-78743-222-2},
  doi       = {10.1108/S2056-375220170000003001},
  pages     = {1 -- 19},
  year      = {2017},
  abstract  = {The methodological discourse of mixed-methods research offers general procedures to combine quantitative and qualitative methods for investigating complex fields of research such as higher education. However, integrating different methods still poses considerable challenges. To move beyond general recommendations for mixed-methods research, this chapter proposes to discuss methodological issues with respect to a particular research domain. Taking current studies on the transition to higher education as an example, the authors first provide an overview of the potentials and limitations of quantitative and qualitative methods in the research domain. Second, they show the need for a conceptual framework grounded in the theory of the research object to guide the integration of different methods and findings. Finally, an example study that investigates transition with regard to the interplay of the individual student and the institutional context serves to illustrate the guiding role of theory. The framework integrates different theoretical perspectives on transition, informs the selection of the research methods, and defines the nexus of the two strands that constitute the mixed-methods design. As the interplay of individual and context is of concern for teaching and learning in general, the example presented may be fruitful for the wider field of higher education research.},
  language  = {en}
}