@inproceedings{MoshiriKahakPfaffGaebeletal.2017,
  author    = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander},
  title     = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln},
  series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  pages     = {3 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{Wollert1994,
  author    = {Wollert, J{\"o}rg},
  title     = {Modellierung intelligenter Regelungen mit analytischen und heuristischen Merkmalen},
  series = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994},
  booktitle = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994},
  publisher = {Techn. Univ.},
  address   = {Ilmenau},
  organization    = {Technische Universit{\"a}t <Ilmenau>},
  issn      = {0943-7207},
  pages     = {181 -- 188},
  year      = {1994},
  language  = {de}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffVinsonneauBurnham2006,
  author    = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.},
  title     = {Multiple models for nonlinear systems},
  series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  organization    = {International Conference on Systems Engineering <18, 2006, Coventry>},
  isbn      = {1-84600-013-0},
  pages     = {347 -- 352},
  year      = {2006},
  language  = {en}
}
@inproceedings{ReisgenSchleserScheiketal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.},
  title     = {Novel process chains for the production of plastics/metal-hybrids},
  series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  editor    = {Thoben, Klaus-Dieter},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Forschungsinstitut f{\"u}r Rationalisierung <Aachen> ; International Conference on Concurrent Enterprising <17, 2011, Aachen>},
  isbn      = {978-1-457-70772-8 ; 978-3-943024-05-0},
  pages     = {596 -- 604},
  year      = {2011},
  language  = {en}
}
@inproceedings{Wollert1994,
  author    = {Wollert, J{\"o}rg},
  title     = {Objekt-orientierte Modellierung hybrider Systeme mit heuristischen und analytischen Merkmalen},
  series = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)},
  booktitle = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)},
  publisher = {Univ., Fak. f. Elektrotechnik},
  address   = {Dortmund},
  pages     = {246 -- 257},
  year      = {1994},
  language  = {de}
}
@inproceedings{PfaffBurnham2008,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>},
  isbn      = {978-0-7695-3331-5 ; 978-0-7695-2719-2},
  pages     = {89 -- 94},
  year      = {2008},
  language  = {en}
}
@inproceedings{FiedlerGottschlichMuellerMelcher2021,
  author    = {Fiedler, Gerda and Gottschlich-M{\"u}ller, Birgit and Melcher, Karin},
  title     = {Online-Pr{\"u}fungen mit STACK Aufgaben},
  series = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021},
  booktitle = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021},
  editor    = {Liu-Henke, Xiaobo and Durak, Umut},
  publisher = {ARGESIM Verlag},
  address   = {Wien},
  isbn      = {978-3-901608-69-8},
  doi       = {10.11128/arep.45},
  pages     = {6 Seiten},
  year      = {2021},
  abstract  = {Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere f{\"u}r eine Open-Book Online Pr{\"u}fung geeignet, da eine faire Pr{\"u}fungssituation gew{\"a}hrleistet werden kann.},
  language  = {de}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@inproceedings{SchuermannWollert2008,
  author    = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition},
  series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Automatisierungskongress <2008, Baden-Baden>},
  isbn      = {978-3-18-092032-0},
  pages     = {353 -- 356},
  year      = {2008},
  language  = {de}
}
@inproceedings{GrossmannGabrielliHerdrichetal.2015,
  author    = {Großmann, Agnes and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Schnauffer, Peter and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Overview of the MultiRob 3D Lunar Industrial Development Project},
  series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  pages     = {8 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{Kallweit2012,
  author    = {Kallweit, Stephan},
  title     = {Pandaboard, TurtleBot, Kinect und Co. : Low-Cost Hardware im Lehreinsatz f{\"u}r die mobile Robotik.},
  year      = {2012},
  abstract  = {Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 8-1 S. 229-238 Original-Abstract des Autors: "Die mobile Robotik wird durch den Einsatz von Low-Cost Hardware einem breiten Publikum zug{\"a}nglich. Bis vor kurzem basierte eine erschwingliche Hardware meist auf Mikrocontrollern mit den entsprechenden Leistungseinschr{\"a}nkungen z.B. im Bereich der Bildverarbeitung. Die Wahrnehmung einer 3D-Umgebung und somit die M{\"o}glichkeit zur autonomen Navigation wurde mit relativ kostenintensiver Hardware, z.B. Stereo-Vision-Systemen und Laserscannern gel{\"o}st. Die zur Auswertung der Sensorik notwendige Rechenleistung stand - entweder aufgrund des Stromverbrauchs oder der Performance meist f{\"u}r mobile Plattformen (lokal) - nicht zur Verf{\"u}gung. Durch Einsatz von leistungsf{\"a}higen Prozessoren aus dem Bereich der Mobilger{\"a}te (Smartphones, Tablets) und neuartigen Sensoren des Consumer-Bereichs, wie der Kinect, k{\"o}nnen mobile Roboter kosteng{\"u}nstig f{\"u}r den Einsatz in der Lehre aufgebaut werden.},
  subject      = {Robotik},
  language  = {de}
}
@inproceedings{ChudobaKonradSchleseretal.2009,
  author    = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe},
  title     = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-122-5},
  pages     = {87 -- 98},
  year      = {2009},
  language  = {en}
}
@inproceedings{WollertRau2012,
  author    = {Wollert, J{\"o}rg and Rau, S.},
  title     = {Performance von embedded WLAN-Systemen bei koexistierenden Netzwerken},
  series = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)},
  booktitle = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)},
  publisher = {Inst. f{\"u}r Industrielle Informationstechnik},
  address   = {Lemgo},
  organization    = {Jahreskolloquium Kommunikation in der Automation <3, 2012, Lemgo>},
  isbn      = {978-3-9814062-2-1},
  pages     = {1 CD-ROM},
  year      = {2012},
  language  = {de}
}
@inproceedings{BudaSchneiderWollert2009,
  author    = {Buda, Aurel and Schneider, Ulf and Wollert, J{\"o}rg},
  title     = {Performanceanalyse von Frequenzdiversit{\"a}t in IEEE 802.15.4 Netzwerken},
  series = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)},
  booktitle = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-380010-0},
  pages     = {29 -- 38},
  year      = {2009},
  language  = {de}
}
@inproceedings{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Performanceanforderungen von Funkstrecken in der Prozess- und Fertigungsautomation},
  series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Automatisierungskongress <2008, Baden-Baden>},
  isbn      = {978-3-18-092032-0},
  pages     = {247 -- 248},
  year      = {2008},
  language  = {de}
}
@inproceedings{KleineKallweitMichauxetal.2016,
  author    = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert},
  title     = {PIV Measurement of Shock Wave Diffraction},
  series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  pages     = {1 -- 14},
  year      = {2016},
  language  = {en}
}
@inproceedings{RoehrigGrossmannKuenemundetal.2008,
  author    = {R{\"o}hrig, Christof and Großmann, Uwe and K{\"u}nemund, Frank and Gansemer, Sebastian and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration},
  series = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  booktitle = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  publisher = {AKA},
  address   = {Heidelberg},
  isbn      = {978-3-89838-608-1},
  pages     = {337 -- 348},
  year      = {2008},
  language  = {de}
}
@inproceedings{VedralWollert2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Praktische Untersuchungen zum zeitlichen {\"U}bertragungs- und B{\"u}ndelfehlerverhalten der IEEE 802.15.4},
  series = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen},
  booktitle = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen},
  publisher = {Design\&Elektronik},
  address   = {Poing},
  organization    = {Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke <2006, M{\"u}nchen>},
  year      = {2006},
  language  = {de}
}
@inproceedings{VredalWollert2006,
  author    = {Vredal, Andreas and Wollert, J{\"o}rg},
  title     = {Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen},
  series = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)},
  booktitle = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091939-6},
  pages     = {135 -- 146},
  year      = {2006},
  language  = {de}
}
@inproceedings{RieperGebhardtStucker2016,
  author    = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent},
  title     = {Process parameters for Selective Laser Melting of AgCu7},
  series = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3},
  booktitle = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3},
  publisher = {Fraunhofer-Verlag},
  address   = {Stuttgart},
  isbn      = {978-3-8396-1001-5},
  pages     = {171 -- 176},
  year      = {2016},
  language  = {en}
}
@inproceedings{SchmidtKaschEichleretal.2021,
  author    = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura},
  title     = {Process strategies on laser-based melting of glass powder},
  series = {Lasers in Manufacturing Conference 2021},
  booktitle = {Lasers in Manufacturing Conference 2021},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.},
  language  = {en}
}
@inproceedings{Klocke2011,
  author    = {Klocke, Martina},
  title     = {Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik},
  series = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen},
  booktitle = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen},
  pages     = {1 -- 25},
  year      = {2011},
  language  = {de}
}
@inproceedings{Klocke2012,
  author    = {Klocke, Martina},
  title     = {Projektmodul im Bachelorstudiengang Maschinenbau und Mechatronik},
  series = {VDI-Workshop Projektorientiertes und problem-basiertes Lernen (PBL) in der Ingenieurausbildung},
  booktitle = {VDI-Workshop Projektorientiertes und problem-basiertes Lernen (PBL) in der Ingenieurausbildung},
  pages     = {1 -- 25},
  year      = {2012},
  language  = {de}
}
@inproceedings{Pfaff2018,
  author    = {Pfaff, Raphael},
  title     = {Railway Challenge 2018 - Ein Wettbewerb f{\"u}r Parkbahn-Lokomotiven},
  series = {Deine Bahn},
  booktitle = {Deine Bahn},
  issn      = {0948-7263},
  pages     = {22 -- 24},
  year      = {2018},
  language  = {de}
}
@inproceedings{ChavezBermudezCruzCastanonRuchayetal.2022,
  author    = {Chavez Bermudez, Victor Francisco and Cruz Castanon, Victor Fernando and Ruchay, Marco and Wollert, J{\"o}rg},
  title     = {Rapid prototyping framework for automation applications based on IO-Link},
  series = {Tagungsband AALE 2022},
  booktitle = {Tagungsband AALE 2022},
  editor    = {Leipzig, Hochschule f{\"u}r Technik, Wirtschaft und Kultur},
  address   = {Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.28},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The development of protype applications with sensors and actuators in the automation industry requires tools that are independent of manufacturer, and are flexible enough to be modified or extended for any specific requirements. Currently, developing prototypes with industrial sensors and actuators is not straightforward. First of all, the exchange of information depends on the industrial protocol that these devices have. Second, a specific configuration and installation is done based on the hardware that is used, such as automation controllers or industrial gateways. This means that the development for a specific industrial protocol, highly depends on the hardware and the software that vendors provide. In this work we propose a rapid-prototyping framework based on Arduino to solve this problem. For this project we have focused to work with the IO-Link protocol. The framework consists of an Arduino shield that acts as the physical layer, and a software that implements the IO-Link Master protocol. The main advantage of such framework is that an application with industrial devices can be rapid-prototyped with ease as its vendor independent, open-source and can be ported easily to other Arduino compatible boards. In comparison, a typical approach requires proprietary hardware, is not easy to port to another system and is closed-source.},
  language  = {en}
}
@inproceedings{PfaffMelcherFranzen2018,
  author    = {Pfaff, Raphael and Melcher, Karin and Franzen, Julian},
  title     = {Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems},
  series = {Proceedings of the European Conference of the PHM Society},
  volume    = {4},
  booktitle = {Proceedings of the European Conference of the PHM Society},
  number    = {1},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{Starke2009,
  author    = {Starke, G{\"u}nther},
  title     = {Robotertechnik f{\"u}r individuelle Automatisierungsl{\"o}sungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen \& Schneiden 2009" - Stand und Entwicklungstendenzen},
  series = {Schweissen und Schneiden},
  booktitle = {Schweissen und Schneiden},
  publisher = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.},
  issn      = {0036-7184 (Print)},
  pages     = {N 13 (nach Seite 716)},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserThiele2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Thiele, Regina},
  title     = {Schweißverbindungen in Lithium-Ionen-Batterien},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren},
  isbn      = {978-3-87155-593-0},
  pages     = {157 -- 161},
  year      = {2012},
  language  = {de}
}
@inproceedings{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungstechnische Dimensionierung von Maschinens{\"a}tzen mit Stromrichtermotoren},
  series = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  booktitle = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  editor    = {Peeken, Heinz},
  publisher = {Verl. T{\"U}V Rheinland},
  address   = {K{\"o}ln},
  issn      = {3-88585-639-5},
  pages     = {309 -- 333},
  year      = {1989},
  language  = {de}
}
@inproceedings{BueckingPfaffDirksmeier2018,
  author    = {B{\"u}cking, Henrik and Pfaff, Raphael and Dirksmeier, Roger},
  title     = {Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles},
  series = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  booktitle = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  pages     = {5 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{VedralWollert2005,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Service based Bluetooth dual-hop networks using CORBA},
  series = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  booktitle = {Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Conference on Artificial Intelligence and Applications <2005, Innsbruck> ; International Multi-Conference on Applied Informatics <23, 2005, Innsbruck>},
  isbn      = {0-88986-457-8},
  pages     = {724 -- 728},
  year      = {2005},
  language  = {en}
}
@inproceedings{QuadfliegSchoeneSchleseretal.2012,
  author    = {Quadflieg, Till and Schoene, Jens and Schleser, Markus and Jockenh{\"o}vel, Stefan and Reisgen, Uwe and Gries, Thomas},
  title     = {Shear connectors for hybrid joints of metal and FRP},
  series = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  booktitle = {Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference},
  editor    = {Heslehurst, Rikard Benton},
  publisher = {Composites Australia},
  address   = {Hawthorne},
  isbn      = {978-0-9873285-0-2},
  pages     = {[152] -- [160]},
  year      = {2012},
  language  = {en}
}
@inproceedings{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Sicherheit in kabellosen Netzwerken},
  series = {SPS/IPC/DRIVES 2004 : SPS/IPC/DRIVES, Elektrische Automatisierung - Systeme und Komponenten, Fachmesse \& Kongress, 23. - 25. Nov. 2004, N{\"u}rnberg},
  booktitle = {SPS/IPC/DRIVES 2004 : SPS/IPC/DRIVES, Elektrische Automatisierung - Systeme und Komponenten, Fachmesse \& Kongress, 23. - 25. Nov. 2004, N{\"u}rnberg},
  publisher = {Poing},
  address   = {Franzis},
  isbn      = {3-7723-6709-7},
  pages     = {335 -- 341},
  year      = {2004},
  language  = {de}
}
@inproceedings{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Sicherheit und Sicherheitsl{\"u}cken in kabellosen Automatisierungsnetzwerken : wieviel Sicherheit braucht ein Automatisierungsnetzwerk?},
  series = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  booktitle = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091843-8},
  pages     = {91 -- 104},
  year      = {2004},
  language  = {de}
}
@inproceedings{SchuermannLeidingerWollert2010,
  author    = {Sch{\"u}rmann, Volker and Leidinger, R. and Wollert, J{\"o}rg},
  title     = {Simplified rapid-prototyping with automation technology},
  series = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  booktitle = {Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings},
  organization    = {FISITA 2010 World Automotive Congress <Budapest>},
  isbn      = {978-963-9058-29-3},
  pages     = {F2010C093},
  year      = {2010},
  language  = {en}
}
@inproceedings{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Simulation des Tropfen{\"u}bergangs beim MSG-Impulslichtbogenschweißen},
  series = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  booktitle = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2011, Hamburg>},
  isbn      = {978-3-87155-267-0},
  pages     = {554 -- 559},
  year      = {2011},
  language  = {de}
}
@inproceedings{UlmerBraunChengetal.2020,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Simulation und Verifikation komplexer Handarbeitsprozesse durch die Kombination von Virtual Reality und Augmented Reality im Single-Piece-Workflow},
  series = {AALE 2020, 17. Fachkonferenz Angewandte Automatisierungstechnik in Lehre und Entwicklung, Automatisierung und Mensch-Technik-Interaktion, Leipzig, DE, 4.-6.3.2020},
  booktitle = {AALE 2020, 17. Fachkonferenz Angewandte Automatisierungstechnik in Lehre und Entwicklung, Automatisierung und Mensch-Technik-Interaktion, Leipzig, DE, 4.-6.3.2020},
  isbn      = {978-3-8007-5180-8},
  pages     = {1 -- 4},
  year      = {2020},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, Andre},
  title     = {SimWeld - 10 Jahre Schweißprozesssimulation im ISF},
  series = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)},
  booktitle = {Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)},
  editor    = {Rumpe, Bernhard and Lichter, Horst},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1600-0},
  pages     = {55 -- 62},
  year      = {2012},
  language  = {de}
}
@inproceedings{KaschSchmidtEichleretal.2020,
  author    = {Kasch, Susanne and Schmidt, Thomas and Eichler, Fabian and Thurn, Laura and Jahn, Simon and Bremen, Sebastian},
  title     = {Solution approaches and process concepts for powder bed-based melting of glass},
  series = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  booktitle = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-54333-4 (Print)},
  doi       = {10.1007/978-3-030-54334-1_7},
  pages     = {82 -- 95},
  year      = {2020},
  abstract  = {In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component's properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{SeilerGeorgePfaffetal.2005,
  author    = {Seiler, Friedrich and George, Alfred and Pfaff, Raphael and Srulijes, Julio},
  title     = {Stand der Entwicklung des ISL Dopplerbildverfahrens},
  series = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  booktitle = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  publisher = {Techn. Univ.},
  address   = {Cottbus},
  organization    = {Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik <13, 2005, Cottbus>},
  isbn      = {3-9805613-2-1},
  pages     = {24-1 -- 24-8},
  year      = {2005},
  language  = {de}
}
@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@inproceedings{PfeifferBalcGebhardt2021,
  author    = {Pfeiffer, Johann and Balc, N. and Gebhardt, Andreas},
  title     = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen},
  series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  publisher = {Verlag Ernst-Abbe-Hochschule Jena},
  address   = {Jena},
  isbn      = {978-3-932886-36-2},
  pages     = {99 -- 102},
  year      = {2021},
  abstract  = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.},
  language  = {de}
}
@inproceedings{BraunChengDoweyetal.2020,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems},
  series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)},
  doi       = {10.1109/ISIE45063.2020.9152210},
  year      = {2020},
  language  = {en}
}
@inproceedings{GabrielliSeelmannGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Seelmann, J{\"u}rgen and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {System Architecture of a Lunar Industry Plant Using Regolith},
  series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  pages     = {8 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {Technologischer {\"U}berblick - welches ist die richtige kabellose Technologie? Grenzen und M{\"o}glichkeiten der Funk{\"u}bertragung sowie der konkreten Nutzung verschiedener Technolgien},
  series = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  booktitle = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert},
  publisher = {AKA},
  address   = {Heidelberg},
  organization    = {Wireless-Technologies-Kongress <10, 2008, Bochum>},
  isbn      = {978-3-89838-608-1},
  pages     = {349},
  year      = {2008},
  language  = {de}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@inproceedings{VedralWollertBudaetal.2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg and Buda, A. and Altrock, R.},
  title     = {The capability of bluetooth for real-time transmission in automation},
  series = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  booktitle = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Association of Science and Technology for Development},
  pages     = {168 -- 175},
  year      = {2006},
  language  = {en}
}
@inproceedings{ShahidiPfaffEnning2017,
  author    = {Shahidi, Parham and Pfaff, Raphael and Enning, Manfred},
  title     = {The connected wagon - a concept for the integration of vehicle side sensors and actors with cyber physical representation for condition based maintenance},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 8},
  year      = {2017},
  language  = {en}
}