@inproceedings{EndressBragard2017,
  author    = {Endress, Tim and Bragard, Michael},
  title     = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench},
  series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-5386-3846-0},
  doi       = {10.1109/RTUCON.2017.8124775},
  pages     = {5 Seiten},
  year      = {2017},
  abstract  = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Improvements for a robust production in the RoboCup logistics league 2016},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_49},
  pages     = {589 -- 600},
  year      = {2017},
  language  = {en}
}
@inproceedings{FunkeBeckmannKeinzetal.2017,
  author    = {Funke, Harald and Beckmann, Nils and Keinz, Jan and Abanteriba, Sylvester},
  title     = {Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications},
  series = {Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Volume 4B: Combustion, Fuels and Emissions. Charlotte, North Carolina, USA. June 26-30, 2017},
  booktitle = {Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Volume 4B: Combustion, Fuels and Emissions. Charlotte, North Carolina, USA. June 26-30, 2017},
  publisher = {ASME},
  address   = {New York},
  isbn      = {978-0-7918-5085-5},
  doi       = {10.1115/GT2017-64795},
  year      = {2017},
  abstract  = {The Dry-Low-NOx (DLN) Micromix combustion technology has been developed originally as a low emission alternative for industrial gas turbine combustors fueled with hydrogen. Currently the ongoing research process targets flexible fuel operation with hydrogen and syngas fuel. The non-premixed combustion process features jet-in-crossflow-mixing of fuel and oxidizer and combustion through multiple miniaturized flames. The miniaturization of the flames leads to a significant reduction of NOx emissions due to the very short residence time of reactants in the flame. The paper presents the results of a numerical and experimental combustor test campaign. It is conducted as part of an integration study for a dual-fuel (H2 and H2/CO 90/10 Vol.\%) Micromix combustion chamber prototype for application under full scale, pressurized gas turbine conditions in the auxiliary power unit Honeywell Garrett GTCP 36-300. In the presented experimental studies, the integration-optimized dual-fuel Micromix combustor geometry is tested at atmospheric pressure over a range of gas turbine operating conditions with hydrogen and syngas fuel. The experimental investigations are supported by numerical combustion and flow simulations. For validation, the results of experimental exhaust gas analyses are applied. Despite the significantly differing fuel characteristics between pure hydrogen and hydrogen-rich syngas the evaluated dual-fuel Micromix prototype shows a significant low NOx performance and high combustion efficiency. The combustor features an increased energy density that benefits manufacturing complexity and costs.},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {South African robotics entity for a collaboration initiative},
  series = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  booktitle = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  publisher = {IEEE},
  isbn      = {978-1-5090-3335-5},
  doi       = {10.1109/RoboMech.2016.7813144},
  pages     = {1 -- 6},
  year      = {2017},
  language  = {en}
}
@inproceedings{StrieganHajAyedFunkeetal.2017,
  author    = {Striegan, C. and Haj Ayed, A. and Funke, Harald and Loechle, S. and Kazari, M. and Horikawa, A. and Okada, K. and Koga, K.},
  title     = {Numerical combustion and heat transfer simulations and validation for a hydrogen fueled "micromix" test combustor in industrial gas turbine applications},
  series = {Proceedings of the ASME Turbo Expo},
  booktitle = {Proceedings of the ASME Turbo Expo},
  number    = {Volume Part F130041-4B, 2017},
  isbn      = {978-079185085-5},
  doi       = {10.1115/GT2017-64719},
  year      = {2017},
  language  = {en}
}
@inproceedings{Fissabre2017,
  author    = {Fissabre, Anke},
  title     = {Technische Argumente im Diskurs f{\"u}r und wider das Flachdach in der klassischen Moderne},
  series = {Alltag und Ver{\"a}nderung. Praktiken des Bauens und Konstruierens. Tagungsband der Zweiten Jahrestagung der Gesellschaft f{\"u}r Bautechnikgeschichte vom 23. bis 25. April 2015 in Innsbruck},
  booktitle = {Alltag und Ver{\"a}nderung. Praktiken des Bauens und Konstruierens. Tagungsband der Zweiten Jahrestagung der Gesellschaft f{\"u}r Bautechnikgeschichte vom 23. bis 25. April 2015 in Innsbruck},
  publisher = {Thelem},
  address   = {Dresden},
  isbn      = {978-3-945363-76-8},
  pages     = {45 -- 60},
  year      = {2017},
  language  = {de}
}
@inproceedings{BarnatKnutzen2017,
  author    = {Barnat, Miriam and Knutzen, S.},
  title     = {Erfolgsstrategien f{\"u}r organisationales Lernen},
  series = {Hochschulwege 2015 : Wie ver{\"a}ndern Projekte die Hochschulen? ; Dokumentation der Tagung in Weimar im M{\"a}rz 2015},
  booktitle = {Hochschulwege 2015 : Wie ver{\"a}ndern Projekte die Hochschulen? ; Dokumentation der Tagung in Weimar im M{\"a}rz 2015},
  editor    = {Mai, Andreas},
  publisher = {tredition},
  address   = {Hamburg},
  isbn      = {978-3-7439-1763-7},
  pages     = {91 -- 108},
  year      = {2017},
  language  = {de}
}
@inproceedings{GrundmannMessBieleetal.2017,
  author    = {Grundmann, Jan Thimo and Meß, Jan-Gerd and Biele, Jens and Seefeldt, Patric and Dachwald, Bernd and Spietz, Peter and Grimm, Christian D. and Spr{\"o}witz, Tom and Lange, Caroline and Ulamec, Stephan},
  title     = {Small spacecraft in small solar system body applications},
  series = {IEEE Aerospace Conference 2017, Big Sky, Montana, USA},
  booktitle = {IEEE Aerospace Conference 2017, Big Sky, Montana, USA},
  organization    = {IEEE Aerospace Conference},
  isbn      = {978-1-5090-1613-6},
  doi       = {10.1109/AERO.2017.7943626},
  pages     = {1 -- 20},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchmidtsBoltesKraftetal.2017,
  author    = {Schmidts, Oliver and Boltes, Maik and Kraft, Bodo and Schreiber, Marc},
  title     = {Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers},
  series = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  booktitle = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  pages     = {1 -- 4},
  year      = {2017},
  language  = {en}
}
@inproceedings{ValeroBungErpicumetal.2017,
  author    = {Valero, Daniel and Bung, Daniel B. and Erpicum, Sebastien and Dewals, Benjamin},
  title     = {Numerical study of turbulent oscillations around a cylinder: RANS capabilities and sensitivity analysis},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {3126 -- 3135},
  year      = {2017},
  language  = {en}
}
@inproceedings{BungValero2017,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {FlowCV - An open-source toolbox for computer vision applications in turbulent flows},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {5356 -- 5365},
  year      = {2017},
  language  = {en}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League},
  series = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  booktitle = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_53},
  pages     = {634 -- 642},
  year      = {2017},
  language  = {en}
}
@inproceedings{ZugNiemuellerHochgeschwenderetal.2017,
  author    = {Zug, Sebastian and Niemueller, Tim and Hochgeschwender, Nico and Seidensticker, Kai and Seidel, Martin and Friedrich, Tim and Neumann, Tobias and Karras, Ulrich and Kraetzschmar, Gerhard K. and Ferrein, Alexander},
  title     = {An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_13},
  pages     = {157 -- 168},
  year      = {2017},
  language  = {en}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@inproceedings{MoshiriKahakPfaffGaebeletal.2017,
  author    = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander},
  title     = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln},
  series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  pages     = {3 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{PfaffSchmidtEnning2017,
  author    = {Pfaff, Raphael and Schmidt, B. D. and Enning, Manfred},
  title     = {Towards inclusion of the freight rail system in the industrial internet of things - Wagon 4.0},
  series = {Stephenson Conference, London, March 2017},
  booktitle = {Stephenson Conference, London, March 2017},
  pages     = {1 -- 10},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchifferFerrein2017,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {A System Layout for Cognitive Service Robots},
  series = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  booktitle = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  issn      = {1613-0073},
  pages     = {44 -- 45},
  year      = {2017},
  language  = {en}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Holzwerkstoffe in Karosseriestrukturen},
  series = {Tagungsband Aachener Holzbautagung 2017},
  booktitle = {Tagungsband Aachener Holzbautagung 2017},
  editor    = {Uibel, Thormas and Peterson, Leif Arne and Baumann, Marcus},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2017},
  language  = {de}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{ShahidiPfaffEnning2017,
  author    = {Shahidi, Parham and Pfaff, Raphael and Enning, Manfred},
  title     = {The connected wagon - a concept for the integration of vehicle side sensors and actors with cyber physical representation for condition based maintenance},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 8},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Analysis of Big Data Streams to obtain Braking Reliability Information for Train Protection systems},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{EnningFratscher2017,
  author    = {Enning, Manfred and Fratscher, Ren{\´e}},
  title     = {Funk-Kommunikation f{\"u}r G{\"u}terwagen: Prinzipien und Anwendungsbeispiel},
  series = {IRSA International Railway Symposium Aachen},
  booktitle = {IRSA International Railway Symposium Aachen},
  pages     = {1 -- 16},
  year      = {2017},
  language  = {de}
}
@inproceedings{SchildtBraunMarcocca2017,
  author    = {Schildt, P. and Braun, Carsten and Marcocca, P.},
  title     = {Flight testing the extra 330LE flying testbed},
  series = {48th Annual International Symposium of the Society of Flight Test Engineers 2017},
  booktitle = {48th Annual International Symposium of the Society of Flight Test Engineers 2017},
  isbn      = {978-151085387-4},
  pages     = {349 -- 362},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchoppHeuermannMarso2017,
  author    = {Schopp, Christoph and Heuermann, Holger and Marso, Michel},
  title     = {Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet},
  series = {IEEE Transactions on Plasma Science},
  volume    = {45},
  booktitle = {IEEE Transactions on Plasma Science},
  number    = {6},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2017.2692735},
  pages     = {932 -- 937},
  year      = {2017},
  language  = {en}
}
@inproceedings{BarnatMergner2017,
  author    = {Barnat, Miriam and Mergner, Julia},
  title     = {Forschungsbasierte Qualit{\"a}tsentwicklung am Beispiel der Analyse von Lernprozessen und der Wirksamkeit von F{\"o}rderprogrammen},
  series = {3. Internationale Tagung f{\"u}r Qualit{\"a}tsmanagement und Qualit{\"a}tsentwicklung im Hochschulbereich 2.-3. Februar 2017},
  booktitle = {3. Internationale Tagung f{\"u}r Qualit{\"a}tsmanagement und Qualit{\"a}tsentwicklung im Hochschulbereich 2.-3. Februar 2017},
  pages     = {28 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{BarnatBosseMergneretal.2017,
  author    = {Barnat, Miriam and Bosse, Elke and Mergner, Julia and J{\"a}nsch, Vanessa},
  title     = {Entwicklung studienrelevanter Kompetenzen im Zusammenspiel mit Studieneinstiegsangeboten},
  series = {KoBF-Auswertungsworkshop 31.05.-01.06.2017},
  booktitle = {KoBF-Auswertungsworkshop 31.05.-01.06.2017},
  pages     = {53 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{FunkeKeinzHendrick2017,
  author    = {Funke, Harald and Keinz, Jan and Hendrick, P.},
  title     = {Experimental Evaluation of the Pollutant and Noise Emissions of the GTCP 36-300 Gas Turbine Operated with Kerosene and a Low NOX Micromix Hydrogen Combustor},
  series = {7th European Conference for Aeronautics and Space Sciences, EUCASS 2017},
  booktitle = {7th European Conference for Aeronautics and Space Sciences, EUCASS 2017},
  organization    = {7th European Conference for Aeronautics and Space Sciences, EUCASS 2017-125, Milan, Italy, July 2017},
  doi       = {10.13009/EUCASS2017-125},
  pages     = {10 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{Czupalla2017,
  author    = {Czupalla, Markus},
  title     = {Pflanzen oder Maschinen - was l{\"a}ßt uns auf dem Mars {\"u}berleben?},
  series = {{\"U}berleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017},
  booktitle = {{\"U}berleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017},
  pages     = {12 -- 12},
  year      = {2017},
  language  = {de}
}
@inproceedings{BlomeGerzerBaumstarkKhanetal.2017,
  author    = {Blome, Hans-Joachim and Gerzer, Rupert and Baumstark-Khan, Christa and Ewald, Reinhold and Heinicke, Christiane and Czupalla, Markus and Carter, Layne and Anderson, Molly},
  title     = {{\"U}berleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017},
  pages     = {15 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {Design considerations of the duo fugam dual rotor UAV},
  series = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  booktitle = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  isbn      = {978-1-5386-2314-5},
  doi       = {10.1109/RoboMech.2017.8261115},
  pages     = {7 -- 13},
  year      = {2017},
  language  = {en}
}
@inproceedings{SauerbornLiebenstundRaueetal.2017,
  author    = {Sauerborn, Markus and Liebenstund, Lena and Raue, Markus and Mang, Thomas and Herrmann, Ulf and Dueing, Andreas},
  title     = {Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components},
  series = {AIP Conference Proceedings},
  volume    = {1850},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  doi       = {10.1063/1.4984388},
  pages     = {030045-1 -- 030045-8},
  year      = {2017},
  language  = {en}
}
@inproceedings{FingerBraunBil2017,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {The Impact of Electric Propulsion on the Performance of VTOL UAVs},
  series = {Deutscher Luft- und Raumfahrtkongress 2017, DLRK , M{\"u}nchen},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2017, DLRK , M{\"u}nchen},
  year      = {2017},
  language  = {en}
}
@inproceedings{FingerBraunBil2017,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft},
  series = {Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea},
  booktitle = {Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea},
  pages     = {15 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{Kern2017,
  author    = {Kern, Alexander},
  title     = {Optimierung des Blitzschutzes bei Biogasanlagen},
  series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  isbn      = {978-3-8007-4459-6},
  pages     = {48 -- 56},
  year      = {2017},
  language  = {de}
}
@inproceedings{KernBrocke2017,
  author    = {Kern, Alexander and Brocke, Ralph},
  title     = {Planung von Fangeinrichtungen mit dem dynamischen elektro-geometrischen Modell - M{\"o}gliche praktische Anwendungen},
  series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  isbn      = {978-3-8007-4459-6},
  pages     = {75 -- 82},
  year      = {2017},
  language  = {de}
}
@inproceedings{BirklDiendorferKernetal.2017,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  isbn      = {978-3-8007-4459-6},
  pages     = {146 -- 152},
  year      = {2017},
  language  = {de}
}
@inproceedings{WeberWolf2017,
  author    = {Weber, Niklas and Wolf, Martin},
  title     = {Datenerhebung f{\"u}r die CDG-Forschung},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  editor    = {Barton, Thomas},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {218 -- 227},
  year      = {2017},
  language  = {de}
}
@inproceedings{AltherrPelzEdereretal.2017,
  author    = {Altherr, Lena and Pelz, Peter F. and Ederer, Thorsten and Pfetsch, Marc E.},
  title     = {Optimale Getriebe auf Knopfdruck: Gemischt-ganzzahlige nichtlineare Optimierung zur Entscheidungsunterst{\"u}tzung bei der Auslegung von Getrieben f{\"u}r Kraftfahrzeuge},
  series = {Antriebstechnisches Kolloquium ATK 2017},
  booktitle = {Antriebstechnisches Kolloquium ATK 2017},
  editor    = {Jacobs, Georg},
  isbn      = {9783743148970},
  pages     = {313 -- 325},
  year      = {2017},
  language  = {de}
}
@inproceedings{CarzanaDachwaldNoomen2017,
  author    = {Carzana, Livio and Dachwald, Bernd and Noomen, Ron},
  title     = {Model and trajectory optimization for an ideal laser-enhanced solar sail},
  series = {68th International Astronautical Congress},
  booktitle = {68th International Astronautical Congress},
  year      = {2017},
  abstract  = {A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The potential source of the laser beam is a laser satellite that coverts solar power (in the inner solar system) or nuclear power (in the outer solar system) into laser power. Such a laser satellite (or many of them) can orbit anywhere in the solar system and its optimal orbit (or their optimal orbits) for a given mission is a subject for future research. This contribution provides the model for an ideal laser-enhanced solar sail and investigates how a laser can enhance the thrusting capability of such a sail. The term "ideal" means that the solar sail is assumed to be perfectly reflecting and that the laser beam is assumed to have a constant areal power density over the whole sail area. Since a laser beam has a limited divergence, it can provide radiation pressure at much larger solar distances and increase the radiation pressure force into the desired direction. Therefore, laser-enhanced solar sails may make missions feasible, that would otherwise have prohibitively long flight times, e.g. rendezvous missions in the outer solar system. This contribution will also analyze exemplary mission scenarios and present optimial trajectories without laying too much emphasis on the design and operations of the laser satellites. If the mission studies conclude that laser-enhanced solar sails would have advantages with respect to "traditional" solar sails, a detailed study of the laser satellites and the whole system architecture would be the second next step},
  language  = {en}
}
@inproceedings{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple NEA rendezvous mission: Solar sailing options},
  series = {Fourth International Symposium on Solar Sailing},
  booktitle = {Fourth International Symposium on Solar Sailing},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58\% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.},
  language  = {en}
}
@inproceedings{GrundmannBieleDachwaldetal.2017,
  author    = {Grundmann, Jan Thimo and Biele, Jens and Dachwald, Bernd and Grimm, Christian D. and Lange, Caroline and Ulamec, Stephan and Ziach, Christian and Spr{\"o}witz, Tom and Ruffer, Michael and Seefeldt, Patric and Spietz, Peter and Toth, Norbert and Mimasu, Yuya and Rittweger, Andreas and Bibring, Jean-Pierre and Braukhane, Andy and Boden, Ralf Christian and Dumont, Etienne and Jahnke, Stephan Siegfried and Jetzschmann, Michael and Kr{\"u}ger, Hans and Lange, Michael and Gomez, Antonio Martelo and Massonett, Didier and Okada, Tatsuaki and Sagliano, Marco and Sasaki, Kaname and Schr{\"o}der, Silvio and Sippel, Martin and Skoczylas, Thomas and Wejmo, Elisabet},
  title     = {Small landers and separable sub-spacecraft for near-term solar sails},
  series = {The Fourth International Symposium on Solar Sailing 2017},
  booktitle = {The Fourth International Symposium on Solar Sailing 2017},
  pages     = {1 -- 10},
  year      = {2017},
  abstract  = {Following the successful PHILAE landing with ESA's ROSETTA probe and the launch of the MINERVA rovers and the Mobile Asteroid Surface Scout, MASCOT, aboard the JAXA space probe, HAYABUSA2, to asteroid (162173) Ryugu, small landers have found increasing interest. Integrated at the instrument level in their mothership they support small solar system body studies. With efficient capabilities, resource-friendly design and inherent robustness they are an attractive exploration mission element. We discuss advantages and constraints of small sub-spacecraft, focusing on emerging areas of activity such as asteroid diversity studies, planetary defence, and asteroid mining, on the background of our projects PHILAE, MASCOT, MASCOT2, the JAXA-DLR Solar Power Sail Lander Design Study, and others. The GOSSAMER-1 solar sail deployment concept also involves independent separable sub-spacecraft operating synchronized to deploy the sail. Small spacecraft require big changes in the way we do things and occasionally a little more effort than would be anticipated based on a traditional large spacecraft approach. In a Constraints-Driven Engineering environment we apply Concurrent Design and Engineering (CD/CE), Concurrent Assembly, Integration and Verification (CAIV) and Model-Based Systems Engineering (MBSE). Near-term solar sails will likely be small spacecraft which we expect to harmonize well with nano-scale separable instrument payload packages.},
  language  = {en}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@inproceedings{DowidatKoenigWolf2017,
  author    = {Dowidat, Linda and K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {The motivational competence developing game framework},
  series = {Mensch und Computer 2017 - Tagungsband},
  booktitle = {Mensch und Computer 2017 - Tagungsband},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Regensburg},
  doi       = {10.18420/muc2017-mci-0130},
  pages     = {15 -- 26},
  year      = {2017},
  abstract  = {Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This 'motivational Competence Developing Game Framework' demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.},
  language  = {en}
}
@inproceedings{SteuerDankertLeichtScholten2017,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Innovation and Diversity : Integrating new perspectives into research associations},
  series = {12th European Conference on Innovation and Entrepreneurship (ECIE 2017) : Paris, France, 21-22 September 2017},
  booktitle = {12th European Conference on Innovation and Entrepreneurship (ECIE 2017) : Paris, France, 21-22 September 2017},
  isbn      = {978-1-911218-54-8},
  pages     = {767 -- 776},
  year      = {2017},
  abstract  = {The link between diversity and innovation is broadly discussed in the context of research and innovation processes. Many institutions and enterprises, specifically in commerce, have already tried to establish sustainable diversity management concepts, in order to increase the diversity of their workforce in addition to establishing a corporate culture of openness. Alongside the creation of a working place where different experiences and skills are valued equally, the entrepreneurial intention is to transfer diversity into economically relevant advantages. Taking into account the potential of diversity in research and innovation processes, the project "Diversity- and Innovation Management" was incorporated within a large interdisciplinary research Cluster. The project's purpose was to study the context between diversity and innovation in research associations and to later develop a customised management concept into an interdisciplinary research Cluster on integrative production technology with full integration. The challenge of such research associations lays in an organisational structure which is often described as being decentralised. Researchers coming from different academic disciplines, while having diverse habits, conduct research on large scientific issues and challenges. In addition, these researchers are socialised in different institutions and university chairs. Theses differences in leadership styles, business cultures and organisational strategies, follow into their research team work. Taking a closer look into the management of human resources suggests that decentral organised recruitment processes, as well as allocation of human resources, lead to a lacking overview in regard to missing competencies, perspectives and backgrounds in research networks. These circumstances are comparable to big corporate groups. While developing a management concept for research associations, these characteristics must be considered. To ensure this, the project follows a human-centred approach, which considers top-down, as well as bottom-up perspectives. This paper presents the applied mixed-method approach in the scientific issue described above. In the frame of the Cluster of Excellence "Integrative Production Technology for High-Wage Countries" research results based on quantitative, as well as qualitative studies, were presented as an application example. This paper provides a new perspective on the innovation and diversity context. Against the background of complex research organisations, the development approach of a management concept is particularly interesting.},
  language  = {en}
}
@inproceedings{RosinMykoniouButenweg2017,
  author    = {Rosin, J. and Mykoniou, K. and Butenweg, Christoph},
  title     = {Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 14},
  year      = {2017},
  abstract  = {Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.},
  language  = {en}
}
@inproceedings{KubalskiButenwegMarinkovićetal.2017,
  author    = {Kubalski, T. and Butenweg, Christoph and Marinković, Marko and Klinkel, S.},
  title     = {Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.},
  language  = {en}
}
@inproceedings{RajanButenwegDalgueretal.2017,
  author    = {Rajan, S. and Butenweg, Christoph and Dalguer, L. A. and An, J. H. and Renault, P. and Klinkel, S.},
  title     = {Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013},
  series = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  year      = {2017},
  language  = {en}
}