@article{HelsperHornSchneideretal.2008, author = {Helsper, Christoph and Horn, Hans-Georg and Schneider, Friedhelm and Wehner, Birgit}, title = {Intercomparison of five mobility size spectrometers for measuring atmospheric submicrometer aerosol particles / Helsper, Christoph ; Horn, Hans-Georg ; Schneider, Friedhelm ; Wehner, Birgit ; Wiedensohler, Alfred}, series = {Gefahrstoffe, Reinhaltung der Luft. Air Quality Control. 68 (2008), H. 11-12}, journal = {Gefahrstoffe, Reinhaltung der Luft. Air Quality Control. 68 (2008), H. 11-12}, isbn = {0949-8036}, pages = {475 -- 481}, year = {2008}, language = {en} } @article{AlexopoulosBreitbachHoffschmidtetal.2008, author = {Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Stobbe, P.}, title = {Computational fluid flow of porous resic ceramic filtering modules and optimization of the channel edge form geometry}, series = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2}, journal = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2}, publisher = {Filtech Exhibitions}, address = {Meerbusch}, pages = {300 -- 304}, year = {2008}, language = {en} } @article{FoersterBelyaevVitusevichetal.2002, author = {F{\"o}rster, Arnold and Belyaev, A. E. and Vitusevich, S.A. and Eaves, L.}, title = {Photoresponse spectra in p-i-n diodes containing quantum dots. Belyaev, A.E.; Vitusevich, S.A.; Eaves, L.; Main, P.C.; Henini, M.; F{\"o}rster, A.; Reetz, W.; Danylyuk, S.V.}, series = {Nanotechnology. 13 (2002), H. 1}, journal = {Nanotechnology. 13 (2002), H. 1}, pages = {94 -- 96}, year = {2002}, language = {en} } @article{FoersterKicinCambeletal.2002, author = {F{\"o}rster, Arnold and Kicin, S and Cambel, V. and Kuliffayova, M.}, title = {Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer. Kicin, S.; Cambel, V.; Kuliffayova, M.; Gregusova, D.; Kovacova, E.; Novak, J.; Kostic, I.; Forster, A.}, series = {Journal of Applied Physics. 91 (2002), H. 2}, journal = {Journal of Applied Physics. 91 (2002), H. 2}, isbn = {1089-7550}, pages = {878 -- 880}, year = {2002}, language = {en} } @article{FoersterCambelKicinetal.2002, author = {F{\"o}rster, Arnold and Cambel, V. and Kicin, S. and Kuliffayov{\´a}, M.}, title = {Preparation of patterned GaAs structures for MEMS and MOEMS. Cambel, V.; Kicin, S.; Kuliffayov{\´a}, M.; Kov{\´a}cov{\´a}, E.; Nov{\´a}k, J.; Kostic, I.; F{\"o}rster, A.}, series = {Materials Science and Engineering: C. 19 (2002), H. 2}, journal = {Materials Science and Engineering: C. 19 (2002), H. 2}, isbn = {0928-4931}, pages = {161 -- 165}, year = {2002}, language = {en} } @article{FoersterMalindretosIndlekoferetal.2002, author = {F{\"o}rster, Arnold and Malindretos, J{\"o}rg and Indlekofer, Klaus Michael and Lepsa, Mihail Ion}, title = {Homogeneity analysis of ion-implanted resonant tunnelling diodes for applications in digital logic circuits. Malindretos, J{\"o}rg; F{\"o}rster, Arno; Indlekofer, Klaus Michael; Lepsa, Mihail Ion; Hardtdegen, Hilde; Schmidt, Roland; Luth, Hans}, series = {Superlattices and Microstructures. 31 (2002), H. 6}, journal = {Superlattices and Microstructures. 31 (2002), H. 6}, isbn = {0749-6036}, pages = {315 -- 325}, year = {2002}, language = {en} } @article{FoersterDarmoSchaferetal.2002, author = {F{\"o}rster, Arnold and Darmo, J. and Schafer, F. and Kordos, P.}, title = {Thermal resistance of the semiconductor structures for a photomixing device. Darmo, J.; Schafer, F.; Forster, A.; Kordos, P.; Gusten, R}, series = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, journal = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {0-7803-7276-X}, pages = {87 -- 90}, year = {2002}, language = {en} } @article{FoersterMikulicsSiebeetal.2002, author = {F{\"o}rster, Arnold and Mikulics, M. and Siebe, F. and Fox, A.}, title = {Generation of 460 GHz radiation by photomixing in low-temperature-grown MBE GaAs. Mikulics, M.; Siebe, F.; Fox, A.; Marso, M.; Forster, A.; Stuer, H.; Schafer, F.; Gusten, R.; Kordos, P.}, series = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, journal = {Conference proceedings : Smolenice Castle, Slovakia, October 14 - 16, 2002 / [organizers: Microelectronics Department, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Bratislava]. Ed. by Juraj Breza}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {0-7803-7276-X}, pages = {129 -- 132}, year = {2002}, language = {en} } @article{FoersterVitusevichBelyaevetal.2002, author = {F{\"o}rster, Arnold and Vitusevich, S. A. and Belyaev, A. E. and Sheka, D. I.}, title = {Resonant tunneling effect in a periodically modulated electrical field. Vitusevich, S.A.; Forster, A.; Belyaev, A.E.; Sheka, D.I.; Luth, H.; Klein, N.; Danylyuk, S.V.; Konakova, R.}, series = {Proceedings of the Tenth International Conference on Modulated Semiconductor Structures : held at the Johannes Kepler University, Linz, Austria, July 23 - 27, 2001 / MSS 10. Guest ed.: G{\"u}nther Bauer ...}, journal = {Proceedings of the Tenth International Conference on Modulated Semiconductor Structures : held at the Johannes Kepler University, Linz, Austria, July 23 - 27, 2001 / MSS 10. Guest ed.: G{\"u}nther Bauer ...}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, pages = {811 -- 813}, year = {2002}, language = {en} } @article{FoersterAdamMikulicsetal.2002, author = {F{\"o}rster, Arnold and Adam, R. and Mikulics, M. and Schelten, J.}, title = {Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R.}, series = {Applied Physics Letters. 81 (2002), H. 18}, journal = {Applied Physics Letters. 81 (2002), H. 18}, isbn = {1077-3118}, pages = {3485 -- 3487}, year = {2002}, language = {en} } @article{FoersterMikulicsMarsoetal.2001, author = {F{\"o}rster, Arnold and Mikulics, M. and Marso, M. and Adam, R.}, title = {Low-temperature-grown MBE GaAs for terahertz photomixers. Mikulics, M.; Marso, M.; Adam, R.; Fox, A.; Buca, D.; F{\"o}rster, A.; Kordos, P.; Xu, Y.; Sobolewski, R.}, series = {2001 Symposium on Electron Devices for Microwave and Optoelectronic Applications ; [Vienna University of Technology, Institute of Electrical Measurements and Circuit Design, 15 - 16 November 2001, Vienna, Austria ; proceedings] / EDMO 2001. Organised by: Institute of Electrical Measurements and Circuit Design, Vienna University of Technology, Austria. With technical co-sponsorship from IEEE Electron Devices Society}, journal = {2001 Symposium on Electron Devices for Microwave and Optoelectronic Applications ; [Vienna University of Technology, Institute of Electrical Measurements and Circuit Design, 15 - 16 November 2001, Vienna, Austria ; proceedings] / EDMO 2001. Organised by: Institute of Electrical Measurements and Circuit Design, Vienna University of Technology, Austria. With technical co-sponsorship from IEEE Electron Devices Society}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {078037049X}, pages = {155 -- 155}, year = {2001}, language = {en} } @article{KrafftFoersterHartetal.2001, author = {Krafft, B. and F{\"o}rster, Arnold and Hart, A. van der and Sch{\"a}pers, T.}, title = {Control of Aharonov-Bohm oscillations in a AlGaAs/GaAs ring by asymmetric and symmetric gate biasing}, series = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4}, journal = {Physica E: Low-dimensional Systems and Nanostructures. 9 (2001), H. 4}, isbn = {1386-9477}, pages = {635 -- 641}, year = {2001}, language = {en} } @article{FoersterMarsoGersdorfetal.1999, author = {F{\"o}rster, Arnold and Marso, M. and Gersdorf, P. and Fox, A.}, title = {An InAlAs-InGaAs OPFET with responsivity above 200 A/W at 1.3-\&\#956;m wavelength. Marso, M.; Gersdorf, P.; Fox, A.; Hodel, U.; Lambertini, R.; Kordos, P.}, series = {IEEE Photonics Technology Letters. 11 (1999), H. 1}, journal = {IEEE Photonics Technology Letters. 11 (1999), H. 1}, isbn = {1041-1135}, pages = {117 -- 119}, year = {1999}, language = {en} } @article{RosenauerOberstLitvinovetal.2000, author = {Rosenauer, A. and Oberst, W. and Litvinov, D. and Gerthsen, D. and F{\"o}rster, Arnold and Schmidt, R.}, title = {Structural and Chemical Investigation of In-0.6Ga0.4As Stranski-Krastanow Layers Burried in GaAs by Transmission Electron Microscopy}, series = {Physical Review B. 61 (2000), H. 12}, journal = {Physical Review B. 61 (2000), H. 12}, isbn = {1095-3795}, pages = {8276 -- 8288}, year = {2000}, language = {en} } @article{FoersterVitusevichBelyaev1999, author = {F{\"o}rster, Arnold and Vitusevich, S. A. and Belyaev, A. E.}, title = {Optically controlled 2D tunneling in GaAs delta-doped p-n junction / S. A. Vitusevich ; A. F{\"o}rster ; A. E. Belyaev ...}, series = {Semiconductor Physics, Quantum Electronics \& Optoelectronics (SQO) : International Scientific Journal. 2 (1999), H. 1}, journal = {Semiconductor Physics, Quantum Electronics \& Optoelectronics (SQO) : International Scientific Journal. 2 (1999), H. 1}, isbn = {1605-6582}, pages = {7 -- 10}, year = {1999}, language = {en} } @article{FoersterVitusevichBelyaev1999, author = {F{\"o}rster, Arnold and Vitusevich, S. A. and Belyaev, B. A.}, title = {Intrinsic bistability effect in delta doped tunneling diodes / S. A. Vitusevich ; A. F{\"o}rster ; B. A. Belyaev ...}, series = {Proceedings of the XXVIII International School on Physics of Semiconducting Compounds : Jaszowiec, Poland, June 6 - 11, 1999 / Polish Academy of Sciences, Institute of Physics. Ed. of the proceedings Wojciech Szuszkiewicz}, journal = {Proceedings of the XXVIII International School on Physics of Semiconducting Compounds : Jaszowiec, Poland, June 6 - 11, 1999 / Polish Academy of Sciences, Institute of Physics. Ed. of the proceedings Wojciech Szuszkiewicz}, address = {Warsaw}, pages = {S. 511 - 688 : Ill., graph. Darst.}, year = {1999}, language = {en} } @article{FoersterLachenmannFriedrichetal.1999, author = {F{\"o}rster, Arnold and Lachenmann, S. G. and Friedrich, I. and Uhlisch, D.}, title = {Superconductor/semiconductor step junctions: the basic element for hybrid three terminal devices. Lachenmann, S. G., F{\"o}rster, A.; Friedrich, I.; Uhlisch, D.; Sch{\"a}pers, Th.; Kastalsky, A.; Golubov, A. A.}, series = {Applied Superconductivity. 6 (1999), H. 10-12}, journal = {Applied Superconductivity. 6 (1999), H. 10-12}, isbn = {0964-1807}, pages = {681 -- 688}, year = {1999}, language = {en} } @article{FoersterVitusevichBelyaevetal.1999, author = {F{\"o}rster, Arnold and Vitusevich, S. A. and Belyaev, A. E. and Indlekofer, K. M.}, title = {Resonant tunneling effect in delta p-n GaAs junction. Vitusevich, S. A.; F{\"o}rster, A.; Belyaev, A. E.; Indlekofer, K. M.; L{\"u}th, H.; Konakova, R. V.}, series = {Microelectronic Engineering. 46 (1999), H. 1-4}, journal = {Microelectronic Engineering. 46 (1999), H. 1-4}, isbn = {0167-9317}, pages = {169 -- 172}, year = {1999}, language = {en} } @article{SchwarzerSilvaFaberetal.2001, author = {Schwarzer, Klemens and Silva, Maria Eug{\^e}nia Vieira da and Faber, Christian and M{\"u}ller, Christoph}, title = {Solar thermal desalination system with heat recovery}, series = {Desalination. 137 (2001), H. 1-3}, journal = {Desalination. 137 (2001), H. 1-3}, isbn = {0011-9164}, pages = {23 -- 29}, year = {2001}, language = {en} } @article{BreitbachSchubert2004, author = {Breitbach, Gerd and Schubert, F.}, title = {A contribution to stress prediction in coatings for gas turbine blades}, series = {Archive of applied mechanics. 73 (2004), H. 9-10}, journal = {Archive of applied mechanics. 73 (2004), H. 9-10}, isbn = {0939-1533}, pages = {682 -- 689}, year = {2004}, language = {en} } @article{BreitbachSchmidtPlutkaSchubertetal.1993, author = {Breitbach, Gerd and Schmidt-Plutka, A. and Schubert, F. and Nickel, H.}, title = {Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings}, series = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures}, journal = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, isbn = {0-444-81515-5}, pages = {203 -- 208}, year = {1993}, language = {en} } @article{BreitbachDeschkaAkiba1992, author = {Breitbach, Gerd and Deschka, S. and Akiba, M.}, title = {High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ; M. Akiba ; G. Breitbach ...}, series = {International journal of refractory metals and hard materials. 11 (1992), H. 6}, journal = {International journal of refractory metals and hard materials. 11 (1992), H. 6}, isbn = {0263-4368}, pages = {367 -- 375}, year = {1992}, language = {en} } @article{BreitbachWolfDeschkaetal.1992, author = {Breitbach, Gerd and Wolf, U. and Deschka, S. and Nickel, H.}, title = {Thermomechanical analysis of an actively cooled divertor mock up}, series = {Tagungsbericht : Jahrestagung Kerntechnik : Stadthalle Karlsruhe, 5.-7. Mai 1992, Karlsruhe = Proceedings / Kerntechnische Gesellschaft ... [Red.: Karl G. Bauer]. - 1. Aufl., als Ms. gedr..}, journal = {Tagungsbericht : Jahrestagung Kerntechnik : Stadthalle Karlsruhe, 5.-7. Mai 1992, Karlsruhe = Proceedings / Kerntechnische Gesellschaft ... [Red.: Karl G. Bauer]. - 1. Aufl., als Ms. gedr..}, publisher = {INFOFORUM}, address = {Bonn}, pages = {457 -- 461}, year = {1992}, language = {en} } @article{HardtBisplinghoffErnstetal.1977, author = {Hardt, Arno and Bisplinghoff, J. and Ernst, J. and L{\"o}hr, R.}, title = {On-line apparatus BANDIT for half-life determination of short-lived neutron deficient isotopes. A. Hardt, J. Bisplinghoff, J. Ernst, R. L{\"o}hr, H. Machner, T . Mayer-Kuckuk}, series = {Nuclear Instruments and Methods. 143 (1977), H. 3}, journal = {Nuclear Instruments and Methods. 143 (1977), H. 3}, isbn = {0029-554X}, pages = {519 -- 523}, year = {1977}, language = {en} } @article{HardtKoehlerMuelleretal.1980, author = {Hardt, Arno and K{\"o}hler, M. and M{\"u}ller, K. D. and Stoff, H.}, title = {A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the J{\"u}lich Cyclotron "JULIC". M. K{\"o}hler, K. D. M{\"u}ller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-B{\"o}ricke , J. Meißburger}, series = {Nuclear Instruments and Methods. 75 (1980), H. 2-3}, journal = {Nuclear Instruments and Methods. 75 (1980), H. 2-3}, isbn = {0029-554X}, pages = {357 -- 362}, year = {1980}, language = {en} } @article{Mohnke1987, author = {Mohnke, Andreas}, title = {High-rate sputtering of zinc oxide with a funnel-shaped magnetic field: Effect of the target thickness on the layer properties}, series = {Vakuum-Technik. 36 (1987), H. 5}, journal = {Vakuum-Technik. 36 (1987), H. 5}, isbn = {0042-2266}, pages = {148 -- 151}, year = {1987}, language = {en} } @article{KernHeidlerZischank1998, author = {Kern, Alexander and Heidler, F. and Zischank, W.}, title = {Induced overvoltages in cable ducts taking into account the current flow into earth / F. Heidler ; W. Zischank ... A. Kern ...}, series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom}, journal = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom}, address = {Birmingham}, year = {1998}, language = {en} } @article{FischerDoerenJanke1981, author = {Fischer, W. A. and D{\"o}ren, Horst-Peter and Janke, Dieter}, title = {Aluminium nitride probes for application in iron melts}, series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3}, journal = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3}, issn = {0003-8962}, pages = {91 -- 98}, year = {1981}, language = {en} } @article{HellmannsBoehmDilger2006, author = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus}, title = {Manual applications of adhesives}, series = {Journal of adhesion and interface}, volume = {Vol. 7}, journal = {Journal of adhesion and interface}, number = {No. 4}, pages = {24 -- 27}, year = {2006}, language = {en} } @article{BoehmHellmannsBackesetal.2006, author = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus}, title = {Lock-in thermography based NDT of parts for the automotive industry}, series = {Journal of adhesion and interface}, volume = {Vol. 7}, journal = {Journal of adhesion and interface}, number = {No. 4}, pages = {10 -- 12}, year = {2006}, language = {en} } @article{SabitovaEbertLenzetal.2013, author = {Sabitova, A. and Ebert, Ph. and Lenz, A. and Schaafhausen, S. and Ivanova, L. and D{\"a}hne, M. and Hoffmann, A. and Dunin-Borkowski, R. E. and F{\"o}rster, Arnold and Grandidier, B. and Eisele, H.}, title = {Intrinsic bandgap of cleaved ZnO(112¯0) surfaces}, series = {Applied physics letters}, volume = {Vol. 102}, journal = {Applied physics letters}, issn = {1077-3118 (E-Journal); 0003-6951 (Print)}, pages = {021608}, year = {2013}, language = {en} } @article{AlebouyehSamamiPieperBreitbachetal.2014, author = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef}, title = {Heat production in the windings of the stators of electric machines under stationary condition}, series = {Heat and mass transfer}, volume = {50}, journal = {Heat and mass transfer}, publisher = {Springer}, address = {Heidelberg}, issn = {0947-7411 (Print) ; 1432-1181 (E-Journal)}, doi = {10.1007/s00231-014-1371-8}, pages = {1707 -- 1716}, year = {2014}, abstract = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.}, language = {en} } @article{JildehWagnerSchoeningetal.2015, author = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin}, title = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement}, series = {Physica status solidi (a)}, volume = {Vol. 212}, journal = {Physica status solidi (a)}, number = {6}, publisher = {Wiley}, address = {Weinheim}, issn = {1862-6319}, doi = {10.1002/pssa.201431893}, pages = {1234 -- 1241}, year = {2015}, abstract = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.}, language = {en} } @article{MottaghyPechnigVogt2011, author = {Mottaghy, Darius and Pechnig, Renate and Vogt, Christian}, title = {The geothermal project Den Haag: 3D numerical models for temperature prediction and reservoir simulation}, series = {Geothermics}, volume = {40}, journal = {Geothermics}, number = {3}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0375-6505}, doi = {10.1016/j.geothermics.2011.07.001}, pages = {199 -- 210}, year = {2011}, abstract = {The proposed Den Haag Zuidwest district heating system of the city of The Hague consists of a deep doublet in a Jurassic sandstone layer that is designed for a production temperature of 75 °C and a reinjection temperature of 40 °C at a flow rate of 150 m3 h-1. The prediction of reservoir temperature and production behavior is crucial for success of the proposed geothermal doublet. This work presents the results of a study of the important geothermal and geohydrological issues for the doublet design. In the first phase of the study, the influences of the three-dimensional (3D) structures of anticlines and synclines on the temperature field were examined. A comprehensive petrophysical investigation was performed to build a large scale 3D-model of the reservoir. Several bottomhole temperatures (BHTs), as well as petrophysical logs were used to calibrate the model using thermal conductivity measurements on 50 samples from boreholes in different lithological units in the study area. Profiles and cross sections extracted from the calculated temperature field were used to study the temperature in the surrounding areas of the planned doublet. In the second phase of the project, a detailed 3D numerical reservoir model was set up, with the aim of predicting the evolution of the producer and injector temperatures, and the extent of the cooled area around the injector. The temperature model from the first phase provided the boundary conditions for the reservoir model. Hydraulic parameters for the target horizons, such as porosity and permeability, were taken from data available from the nearby exploration wells. The simulation results are encouraging as no significant thermal breakthrough is predicted. For the originally planned location of the producer, the extracted water temperature is predicted to be around 79 °C, with an almost negligible cooling in the first 50 years of production. When the producer is located shallower parts of the reservoir, the yield water temperatures is lower, starting at ≈76 °C and decreasing to ≈74 °C after 50 years of operation. This comparatively larger decrease in temperature with time is caused by the structural feature of the reservoir, namely a higher dip causes the cooler water to easily move downward. In view of the poor reservoir data, the reservoir simulation model is constructed to allow iterative updates using data assimilation during planned drilling, testing, and production phases. Measurements during an 8 h pumping test carried out in late 2010 suggest that a flow rate of 150 m3 h-1 is achievable. Fluid temperatures of 76.5 °C were measured, which is very close to the predicted value.}, language = {en} } @article{MottaghySchwambornRath2013, author = {Mottaghy, Darius and Schwamborn, G. and Rath, V.}, title = {Past climate changes and permafrost depth at the Lake El'gygytgyn site: implications from data and thermal modeling}, series = {Climate of the Past}, volume = {9}, journal = {Climate of the Past}, number = {1}, publisher = {Copernicus}, address = {Katlenburg-Lindau}, issn = {1814-9332}, doi = {10.5194/cp-9-119-2013}, pages = {119 -- 133}, year = {2013}, language = {en} } @article{VogtIwanowskiStrahserMarquartetal.2013, author = {Vogt, Christian and Iwanowski-Strahser, Katha and Marquart, Gabriele and Arnold, Juliane and Mottaghy, Darius and Pechnig, Renate and Gnjezda, Daniel and Clauser, Christoph}, title = {Modeling contribution to risk assessment of thermal production power for geothermal reservoirs}, series = {Renewable Energy}, volume = {53}, journal = {Renewable Energy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0960-1481}, doi = {10.1016/j.renene.2012.11.026}, pages = {230 -- 241}, year = {2013}, language = {en} } @article{MottaghySchellschmidtPopovetal.2005, author = {Mottaghy, Darius and Schellschmidt, R. and Popov, Y. A. and Clauser, C. and Kukkonen, I. T. and Nover, G. and Milanovsky, S. and Romushkevich, R. A.}, title = {New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection}, series = {Tectonophysics}, volume = {401}, journal = {Tectonophysics}, number = {1-2}, issn = {1879-3266}, doi = {10.1016/j.tecto.2005.03.005}, pages = {119 -- 142}, year = {2005}, language = {en} } @article{MottaghyRath2006, author = {Mottaghy, Darius and Rath, Volker}, title = {Latent heat effects in subsurface heat transport modelling and their impact on palaeotemperature reconstructions}, series = {Geophysical Journal International}, volume = {164}, journal = {Geophysical Journal International}, number = {1}, issn = {1365-246X}, doi = {10.1111/j.1365-246X.2005.02843.x}, pages = {236 -- 245}, year = {2006}, language = {en} } @article{VogtMottaghyWolfetal.2010, author = {Vogt, C. and Mottaghy, Darius and Wolf, A. and Rath, V. and Pechnig, R. and Clauser, C.}, title = {Reducing temperature uncertainties by stochastic geothermal reservoir modelling}, series = {Geophysical Journal International}, volume = {181}, journal = {Geophysical Journal International}, number = {1}, publisher = {Oxford University Press}, address = {Oxford}, issn = {1365-246X}, doi = {10.1111/j.1365-246X.2009.04498.x}, pages = {321 -- 333}, year = {2010}, abstract = {Quantifying and minimizing uncertainty is vital for simulating technically and economically successful geothermal reservoirs. To this end, we apply a stochastic modelling sequence, a Monte Carlo study, based on (i) creating an ensemble of possible realizations of a reservoir model, (ii) forward simulation of fluid flow and heat transport, and (iii) constraining post-processing using observed state variables. To generate the ensemble, we use the stochastic algorithm of Sequential Gaussian Simulation and test its potential fitting rock properties, such as thermal conductivity and permeability, of a synthetic reference model and—performing a corresponding forward simulation—state variables such as temperature. The ensemble yields probability distributions of rock properties and state variables at any location inside the reservoir. In addition, we perform a constraining post-processing in order to minimize the uncertainty of the obtained distributions by conditioning the ensemble to observed state variables, in this case temperature. This constraining post-processing works particularly well on systems dominated by fluid flow. The stochastic modelling sequence is applied to a large, steady-state 3-D heat flow model of a reservoir in The Hague, Netherlands. The spatial thermal conductivity distribution is simulated stochastically based on available logging data. Errors of bottom-hole temperatures provide thresholds for the constraining technique performed afterwards. This reduce the temperature uncertainty for the proposed target location significantly from 25 to 12 K (full distribution width) in a depth of 2300 m. Assuming a Gaussian shape of the temperature distribution, the standard deviation is 1.8 K. To allow a more comprehensive approach to quantify uncertainty, we also implement the stochastic simulation of boundary conditions and demonstrate this for the basal specific heat flow in the reservoir of The Hague. As expected, this results in a larger distribution width and hence, a larger, but more realistic uncertainty estimate. However, applying the constraining post-processing the uncertainty is again reduced to the level of the post-processing without stochastic boundary simulation. Thus, constraining post-processing is a suitable tool for reducing uncertainty estimates by observed state variables.}, language = {en} } @article{RathMottaghy2007, author = {Rath, V. and Mottaghy, Darius}, title = {Smooth inversion for ground surface temperature histories: estimating the optimum regularization parameter by generalized cross-validation}, series = {Geophysical Journal International}, volume = {171}, journal = {Geophysical Journal International}, number = {3}, issn = {1365-246X}, doi = {10.1111/j.1365-246X.2007.03587.x}, pages = {1440 -- 1448}, year = {2007}, language = {en} } @article{MottaghyVosteenSchellschmidt2008, author = {Mottaghy, Darius and Vosteen, Hans-Dieter and Schellschmidt, R{\"u}diger}, title = {Temperature dependence of the relationship of thermal diffusivity versus thermal conductivity for crystalline rocks}, series = {International Journal of Earth Sciences}, volume = {97}, journal = {International Journal of Earth Sciences}, number = {2}, issn = {1437-3262}, doi = {10.1007/s00531-007-0238-3}, pages = {435 -- 442}, year = {2008}, language = {en} } @article{VogtMottaghyRathetal.2014, author = {Vogt, C. and Mottaghy, Darius and Rath, V. and Marquart, G. and Dijkshoorn, L. and Wolf, A. and Clauser, C.}, title = {Vertical variation in heat flow on the Kola Peninsula: palaeoclimate or fluid flow?}, series = {Geophysical Journal International}, volume = {199}, journal = {Geophysical Journal International}, number = {2}, publisher = {Oxford University Press}, address = {Oxford}, issn = {1365-246X}, doi = {10.1093/gji/ggu282}, pages = {829 -- 843}, year = {2014}, abstract = {Following earlier studies, we present forward and inverse simulations of heat and fluid transport of the upper crust using a local 3-D model of the Kola area. We provide best estimates for palaeotemperatures and permeabilities, their errors and their dependencies. Our results allow discriminating between the two mentioned processes to a certain extent, partly resolving the non-uniqueness of the problem. We find clear indications for a significant contribution of advective heat transport, which, in turn, imply only slightly lower ground surface temperatures during the last glacial maximum relative to the present value. These findings are consistent with the general background knowledge of (i) the fracture zones and the corresponding fluid movements in the bedrock and (ii) the glacial history of the Kola area.}, language = {en} } @article{ChenClauserMarquartetal.2015, author = {Chen, Tao and Clauser, Christoph and Marquart, Gabriele and Willbrand, Karen and Mottaghy, Darius}, title = {A new upscaling method for fractured porous media}, series = {Advances in Water Resources}, volume = {80}, journal = {Advances in Water Resources}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0309-1708}, doi = {10.1016/j.advwatres.2015.03.009}, pages = {60 -- 68}, year = {2015}, language = {en} } @article{KuertenMottaghyZiegler2015, author = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin}, title = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances}, series = {Acta Geotechnica}, volume = {10}, journal = {Acta Geotechnica}, number = {2}, publisher = {Springer}, address = {Berlin}, issn = {1861-1133}, doi = {10.1007/s11440-014-0311-6}, pages = {219 -- 229}, year = {2015}, language = {en} } @article{KuertenMottaghyZiegler2015, author = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin}, title = {Design of plane energy geostructures based on laboratory tests and numerical modelling}, series = {Energy and Buildings}, volume = {107}, journal = {Energy and Buildings}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0378-7788}, doi = {10.1016/j.enbuild.2015.08.039}, pages = {434 -- 444}, year = {2015}, language = {en} } @article{ChudobaButenwegPeiffer2004, author = {Chudoba, Rostislav and Butenweg, Christoph and Peiffer, F.}, title = {Technical information system for collaborative material research}, series = {Advances in engineering software}, volume = {Volume 35}, journal = {Advances in engineering software}, number = {Issue 10-11}, issn = {1873-5339 (E-Journal); 0965-9978 (Print)}, doi = {10.1016/j.advengsoft.2004.03.021}, pages = {747 -- 756}, year = {2004}, language = {en} } @article{MykoniouButenwegHoltschoppenetal.2016, author = {Mykoniou, Konstantin and Butenweg, Christoph and Holtschoppen, Britta and Klinkel, Sven}, title = {Seismic response analysis of adjacent liquid-storage tanks}, series = {Earthquake engineering and structural dynamics}, volume = {45}, journal = {Earthquake engineering and structural dynamics}, number = {11}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1096-9845 (E-Journal); 0098-8847 (Print)}, doi = {10.1002/eqe.2726}, pages = {1779 -- 1796}, year = {2016}, abstract = {A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.}, language = {en} } @article{SrivastavaLahiriMaitietal.2014, author = {Srivastava, A. and Lahiri, S. and Maiti, M. and Knolle, F. and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, E. W.}, title = {Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India}, series = {Journal of Radioanalytical and Nuclear Chemistry}, volume = {2014}, journal = {Journal of Radioanalytical and Nuclear Chemistry}, number = {302}, publisher = {Springer Nature}, address = {Basel}, issn = {1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)}, doi = {0.1007/s10967-014-3450-1}, pages = {1049 -- 1052}, year = {2014}, language = {en} } @article{MarxSchenkBehrensetal.2013, author = {Marx, Ulrich and Schenk, Friedrich and Behrens, Jan and Meyr, Ulrike and Wanek, Paul and Zang, Werner and Schmitt, Robert and Br{\"u}stle, Oliver and Zenke, Martin and Klocke, Fritz}, title = {Automatic production of induced pluripotent stem cells}, series = {Procedia CIRP : First CIRP Conference on BioManufacturing}, volume = {Vol. 5}, journal = {Procedia CIRP : First CIRP Conference on BioManufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, pages = {2 -- 6}, year = {2013}, language = {en} } @article{MistlerAnthoineButenweg2007, author = {Mistler, Michael and Anthoine, A. and Butenweg, Christoph}, title = {In-plane and out-of-plane homogenisation of masonry}, series = {Computers \& structures}, volume = {Volume 85}, journal = {Computers \& structures}, number = {Issues 17-18}, issn = {1879-2243 (E-Journal); 0045-7949 (Print)}, doi = {10.1016/j.compstruc.2006.08.087}, pages = {1321 -- 1330}, year = {2007}, language = {en} }