@article{Wilke2015,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu: ] Yvonne Prinzessin von Cro{\"y}: Das H{\^o}tel de Galliffet (1784-1792). Pariser Baupraxis undAusstattungskunst am feudalen Privatbau des ausgehenden Ancien R{\´e}gime, Hildesheim: Olms 2014},
  series = {Sehepunkte},
  volume    = {15},
  journal   = {Sehepunkte},
  number    = {9},
  issn      = {1618-6168},
  year      = {2015},
  language  = {de}
}
@incollection{Wilke2015,
  author    = {Wilke, Thomas},
  title     = {Lepautre},
  series = {Allgemeines K{\"u}nstler-Lexikon. Bd. 84},
  booktitle = {Allgemeines K{\"u}nstler-Lexikon. Bd. 84},
  publisher = {De Gruyter},
  address   = {Berlin},
  isbn      = {978-3-11-023189-2},
  pages     = {157 -- 160},
  year      = {2015},
  language  = {de}
}
@inproceedings{WiezikHoetterGebhardt2015,
  author    = {Wiezik, P. and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Integration des Laserpolierens in den SLM-Prozess},
  series = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015},
  volume    = {315},
  booktitle = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015},
  publisher = {Verl. f{\"u}r Schweißen und verwandte Verfahren, DVS-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-945023-46-4},
  pages     = {117 -- 120},
  year      = {2015},
  language  = {de}
}
@article{WiesenTippkoetterMuffleretal.2015,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Adsorption of fatty acids to layered double hydroxides in aqueous systems},
  series = {Adsorption},
  volume    = {21},
  journal   = {Adsorption},
  number    = {6-7},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {459 -- 466},
  year      = {2015},
  abstract  = {Due to their anion exchange characteristics, layered double hydroxides (LDHs) are suitable for the detoxification of aqueous, fatty acid containing fermentation substrates. The aim of this study is to examine the adsorption mechanism, using crude glycerol from plant oil esterification as a model system. Changes in the intercalation structure in relation to the amount of fatty acids adsorbed are monitored by X-ray diffraction and infra-red spectroscopy. Additionally, calcination of LDH is investigated in order to increase the binding capacity for fatty acids. Our data propose that, at ambient temperature, fatty acids can be bound to the hydrotalcite by adsorption or in addition by intercalation, depending on fatty acid concentration. The adsorption of fatty acids from crude glycerol shows a BET-like behavior. Above a fatty acid concentration of 3.5 g L-1, intercalation of fatty acids can be shown by the appearance of an increased interlayer spacing. This observation suggests a two phase adsorption process. Calcination of LDHs allows increasing the binding capacity for fatty acids by more than six times, mainly by reduction of structural CO32-.},
  language  = {en}
}
@inproceedings{WeberEnglhardHaileretal.2015,
  author    = {Weber, Tobias and Englhard, Markus and Hailer, Benjamin and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling},
  series = {Proceedings of SAMPE Europe Conference, Amiens , France},
  booktitle = {Proceedings of SAMPE Europe Conference, Amiens , France},
  pages     = {1 -- 10},
  year      = {2015},
  language  = {en}
}
@inproceedings{Weber2015,
  author    = {Weber, Tobias},
  title     = {Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts},
  series = {Proceedings of SAMPE Europe Conference 2015, Amiens, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2015, Amiens, France},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@article{WarmerWagnerSchoeningetal.2015,
  author    = {Warmer, Johannes and Wagner, Patrick and Sch{\"o}ning, Michael Josef and Kaul, Peter},
  title     = {Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431882},
  pages     = {1289 -- 1298},
  year      = {2015},
  language  = {en}
}
@inproceedings{WallnoeferDrathHuening2015,
  author    = {Walln{\"o}fer, Armin and Drath, Rainer and H{\"u}ning, Felix},
  title     = {Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen},
  series = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  booktitle = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092258-4},
  pages     = {1 CD-ROM},
  year      = {2015},
  language  = {de}
}
@article{VoigtAlbrechtSieversetal.2015,
  author    = {Voigt, Birgit and Albrecht, Dirk and Sievers, Susanne and Becher, D{\"o}rte and Bongaerts, Johannes and Evers, Stefan and Schweder, Thomas and Maurer, Karl-Heinz and Hecker, Michael},
  title     = {High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium},
  series = {Proteomics},
  volume    = {15},
  journal   = {Proteomics},
  number    = {15},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1615-9861},
  doi       = {10.1002/pmic.201400504},
  pages     = {2629 -- 2633},
  year      = {2015},
  language  = {en}
}
@incollection{VittingSchmitzLenzetal.2015,
  author    = {Vitting, Eva and Schmitz, Timo and Lenz, Florian and Querg, David},
  title     = {Gib mir ein Zeichen! Visualisierunskonzepte, die Entscheidungshilfe bieten und versteckte Potentiale aufzeigen},
  series = {Ergebnisbericht des BMBF-Verbundprojektes PROSENSE : hochaufl{\"o}sende Produktionssteuerung auf Basis kybernetischer Unterst{\"u}tzungssysteme und intelligenter Sensorik},
  booktitle = {Ergebnisbericht des BMBF-Verbundprojektes PROSENSE : hochaufl{\"o}sende Produktionssteuerung auf Basis kybernetischer Unterst{\"u}tzungssysteme und intelligenter Sensorik},
  editor    = {Schuh, G{\"u}nther},
  publisher = {Apprimus-Verl.},
  address   = {Aachen},
  isbn      = {978-3-86359-346-9},
  pages     = {148 -- 174},
  year      = {2015},
  language  = {de}
}
@incollection{VismannSchueller2015,
  author    = {Vismann, Ulrich and Sch{\"u}ller, Michael},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01680-7 ; 978-3-658-01681-4},
  doi       = {10.1007/978-3-658-01681-4_9},
  pages     = {243 -- 322},
  year      = {2015},
  abstract  = {Das Kapitel Stahlbetonbau besteht aus einer Formelsammlung (Teil A) sowie einem Praxisbeispiel (Teil B). In dem Praxisbeispiel werden exemplarisch die erforderlichen Rechenschritte und Nachweise zur Bemessung im GZT und GZG nach Eurocode 2 [1] vorgestellt. Die Hinweise im Text beziehen sich, soweit nicht explizit erw{\"a}hnt, auf Wendehorst, Bautechnische Zahlentafeln, 35. Auflage, „Stahlbeton- und Spannbetonbau nach Eurocode 2" [2]. Die zum Praxisbeispiel zugeh{\"o}rigen Konstruktions- und Bewehrungszeichnungen stehen im Onlineportal zu diesem Buch zum kostenlosen Download bereit (siehe unter www.springer.com).},
  language  = {de}
}
@incollection{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Beton},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_11},
  pages     = {477 -- 495},
  year      = {2015},
  language  = {de}
}
@book{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... - 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0},
  pages     = {XVI, 1377 S. : graph. Darst.},
  year      = {2015},
  language  = {de}
}
@incollection{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Stahlbeton und Spannbeton nach Eurocode 2},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_12},
  pages     = {497 -- 655},
  year      = {2015},
  language  = {de}
}
@book{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Wendehorst Beispiele aus der Baupraxis / Ulrich Vismann (Hrsg.). - 5., durchges. und aktualis. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01680-7 (print) ; 978-3-658-01681-4 (e-Book)},
  doi       = {10.1007/978-3-658-01681-4},
  pages     = {XIII, 774 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{ValeroBung2015,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Hybrid investigation of air transport processes in moderately sloped stepped spillway flows},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 10},
  year      = {2015},
  language  = {en}
}
@book{UibelPeterson2015,
  author    = {Uibel, Thomas and Peterson, Leif Arne},
  title     = {Tagungsband Aachener Holzbautagung 2015},
  editor    = {Uibel, Thomas and Peterson, Leif Arne},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {85 Seiten. , Illustrationen, graph. Darst.},
  year      = {2015},
  language  = {de}
}
@book{Tuennemann2015,
  author    = {T{\"u}nnemann, Thomas},
  title     = {Formine : Postament - a private view in Kooperation mit A Trans Galerie, Berlin},
  publisher = {FH Aachen},
  address   = {Aachen},
  isbn      = {978-3-9811003-7-2},
  publisher      = {Fachhochschule Aachen},
  pages     = {78 S.},
  year      = {2015},
  abstract  = {Workshop Formine 2015 mit Projekten von Antonia Zajgia, Arnoud Charoy, Laura Viktoria Koch, Kai Stein, Ferdinand Klopfer, Florian D. Heinz, Tobias Scholz, Moritz Gn{\"a}dinger, Pablo Raphael, Franko Scheuplein, Thomas T{\"u}nnemann, Ren{\´e} Großner, Anny Phung, Mylenne Jakob-Wendel, Kira Joerißen, Florian Erber, Julian Wesse und Isolde Nagel},
  language  = {de}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@article{Timme2015,
  author    = {Timme, Michael},
  title     = {K{\"u}ndigung - Die Vorhersehbarkeit eines zuk{\"u}nftigen Eigenbedarfs f{\"u}r den Vermieter},
  series = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  volume    = {69},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  number    = {9},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  pages     = {489 -- 490},
  year      = {2015},
  language  = {de}
}
@incollection{Timme2015,
  author    = {Timme, Michael},
  title     = {Wettbewerbsregeln (\S\S 24-27)},
  series = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:},
  booktitle = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-65462-6},
  pages     = {267 -- 286},
  year      = {2015},
  language  = {de}
}
@article{Timme2015,
  author    = {Timme, Michael},
  title     = {Versagung von Pkh trotz Zulassung der Revi­sion wegen grunds{\"a}tzlicher Bedeutung},
  series = {Neue Juristische Wochenschrift (NJW)},
  journal   = {Neue Juristische Wochenschrift (NJW)},
  number    = {30},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0341-1915},
  pages     = {2173 -- 2175},
  year      = {2015},
  language  = {de}
}
@book{Timme2015,
  author    = {Timme, Michael},
  title     = {BGB Crashkurs : der sichere Weg durch die Pr{\"u}fung ; [Fall f{\"u}r Fall durch das Privatrecht]},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-68018-2},
  pages     = {159 S.},
  year      = {2015},
  language  = {de}
}
@book{Tietze2015,
  author    = {Tietze, J{\"u}rgen},
  title     = {Terme, Gleichungen, Ungleichungen : Rechenregeln begr{\"u}nden, Fehlerfallen vermeiden},
  edition   = {2., {\"u}berarb. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-06192-0 ; 978-3-658-06193-7},
  pages     = {V, 160 S.},
  year      = {2015},
  language  = {de}
}
@book{Tietze2015,
  author    = {Tietze, J{\"u}rgen},
  title     = {Einf{\"u}hrung in die Finanzmathematik : klassische Verfahren und neuere Entwicklungen ; Effektivzins- und Renditeberechnung, Investitionsrechnung, Derivative Finanzinstrumente. - 12., erw. Aufl.},
  edition   = {12., erw. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-07157-8 ; 978-3-658-07156-1},
  pages     = {XII, 453 S.},
  year      = {2015},
  language  = {de}
}
@book{Tietze2015,
  author    = {Tietze, J{\"u}rgen},
  title     = {{\"U}bungsbuch zur Finanzmathematik : Aufgaben, Testklausuren und ausf{\"u}hrliche L{\"o}sungen. - 8., verb. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-09073-9},
  doi       = {10.1007/978-3-658-09074-6},
  pages     = {X, 436 S. : graph. Darst.},
  year      = {2015},
  language  = {de}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Aufarbeitung von Polyphenolen aus Weizen mittels Zeolithen am Beispiel der Ferulas{\"a}ure},
  series = {Chemie IngenieurTechnik},
  volume    = {87},
  journal   = {Chemie IngenieurTechnik},
  number    = {1-2},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201400031},
  pages     = {128 -- 136},
  year      = {2015},
  abstract  = {Aufarbeitung von Polyphenolen aus Weizenmittels Zeolithen am Beispiel der Ferulasa¨ ureAlexander Thiel1, Kai Muffler1, Nils Tippko¨ tter1, Kirstin Suck2, Ulrich Sohling2, Friedrich Ruf3und Roland Ulber1,*DOI: 10.1002/cite.201400031Bei der Ferulasa¨ure handelt es sich um einen Wertstoff, der aus Weizen gewonnen und in der Lebensmittel- und Pharma-industrie eingesetzt werden kann. Der Einsatz von Weizen als nachwachsende Rohstoffquelle ist allerdings nur dann wirt-schaftlich durchfu¨hrbar, wenn eine Prozessintegration in die bestehenden industriellen Verfahren gewa¨hrleistet oder einedirekte Konkurrenz zur Mehl- und Sta¨rkeindustrie vermieden werden kann. In diesem Artikel wird ein Verfahren aufge-zeigt, welches hohe Ausbeuten ermo¨glicht und eine Konkurrenz zu bestehenden Verwertungspfaden vermeidet.},
  language  = {de}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Hruschka, Steffen M. and Ulber, Roland},
  title     = {A novel integrated downstream processing approach to recover sinapic acid, phytic acid and proteins from rapeseed meal},
  series = {Journal of Chemical Technology and Biotechnology},
  volume    = {90},
  journal   = {Journal of Chemical Technology and Biotechnology},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/jctb.4664},
  pages     = {1999 -- 2006},
  year      = {2015},
  abstract  = {BACKGROUND Currently, several techniques exist for the downstream processing of protein, phytic acid and sinapic acid from rapeseed and rapeseed meal, but no technique has been developed to separate all of the components in one process. In this work, two new downstream processing strategies focusing on recovering sinapic acid, phytic acid and protein from rapeseed meal were established. RESULTS The sinapic acid content was enhanced by a factor of 4.5 with one method and 5.1 with the other. The isolation of sinapic acid was accomplished using a zeolite-based adsorbent with high adsorptive and optimal desorption characteristics. Phytic acid was isolated using the anion-exchange resin Purolite A200®. In addition, the processes resulted in two separated protein fractions. The ratios of globulin and albumin ratio to the total protein were 59.2\% and 40.1\%, respectively. The steps were then combined in two different ways: (a) a 'sequential process' using the zeolite and A200 in batch processes; and (b) a 'parallel process' using only A200 in a chromatographic system to separate all of the compounds. CONCLUSIONS It can be concluded that isolation of all three components was possible in both processes. These could enhance the added value of current processes using rapeseed meal as a protein source. © 2015 Society of Chemical Industry},
  language  = {en}
}
@inproceedings{TheisKrisnamurthySchmitz2015,
  author    = {Theis, Jochen and Krisnamurthy, Hemanth Kumar and Schmitz, G{\"u}nter},
  title     = {Modellbasierte Simulation und experimentelle Anwendung von mechatronischen Systemen in der Lehre in Verbindung mit NI myRIO und dem NI LabVIEW Interface Toolkit},
  series = {Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress},
  booktitle = {Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress},
  editor    = {Jamal, Rahman},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3669-0},
  pages     = {362 -- 365},
  year      = {2015},
  language  = {de}
}
@inproceedings{TewariNeshvadGoldbachetal.2015,
  author    = {Tewari, Udit and Neshvad, Surena and Goldbach, Daniel and Sachau, J{\"u}rgen},
  title     = {Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum},
  series = {International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015},
  booktitle = {International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@article{TakenagaSchneiderErbayetal.2015,
  author    = {Takenaga, Shoko and Schneider, Benno and Erbay, E. and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201532053},
  pages     = {1347 -- 1352},
  year      = {2015},
  abstract  = {A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.},
  language  = {en}
}
@inproceedings{TaddeiLozanaMicheletal.2015,
  author    = {Taddei, Francesca and Lozana, Lara and Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction},
  series = {5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.},
  booktitle = {5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.},
  editor    = {Papadrakakis, Manolis and Papadrakakis, M. and Papadopoulos, V. and Plevris, V.},
  year      = {2015},
  language  = {en}
}
@article{TaddeiButenwegKlinkel2015,
  author    = {Taddei, Francesca and Butenweg, Christoph and Klinkel, S.},
  title     = {Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil},
  series = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  volume    = {Volume 18},
  journal   = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1099-1824 (E-Journal); 1095-4244 (Print)},
  doi       = {10.1002/we.1703},
  pages     = {399 -- 417},
  year      = {2015},
  language  = {en}
}
@incollection{Strohmeier2015,
  author    = {Strohmeier, Andreas},
  title     = {Siedlungswasserwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_16},
  pages     = {635 -- 678},
  year      = {2015},
  abstract  = {Nachfolgende Ausf{\"u}hrungen und Berechnungsbeispiele beziehen sich auf Kapitel 19 Siedlungswasserwirtschaft im „Wendehorst: Bautechnische Zahlentafeln 35. Auflage 2015" (abgek{\"u}rzt: BZ). F{\"u}r den Bau von Anlagen der Siedlungswasserwirtschaft sind ebenso die Grundlagen der Hydraulik zu ber{\"u}cksichtigen. Aus diesem Grunde sind auch die entsprechenden Ausf{\"u}hrungen zur Hydraulik zu beachten.},
  language  = {de}
}
@incollection{Strohmeier2015,
  author    = {Strohmeier, Andreas},
  title     = {Siedlungswasserwirtschaft},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01688-3},
  pages     = {1157 -- 1230},
  year      = {2015},
  language  = {de}
}
@incollection{StroetmannLohse2015,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst bautechnische Zahlentafeln / 35. Auflage},
  booktitle = {Wendehorst bautechnische Zahlentafeln / 35. Auflage},
  editor    = {Vismann, Ulrich},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_13},
  pages     = {657 -- 859},
  year      = {2015},
  abstract  = {Es ist zwischen St{\"a}hlen bis S460 und solchen mit h{\"o}herer Streckgrenze zu unterscheiden. St{\"a}hle bis S460 sind auch f{\"u}r die plastische Tragwerksberechnung nach dem Fließgelenkverfahren zugelassen. Bei St{\"a}hlen oberhalb S460 bis S700 ist neben der elastischen eine nichtlineare plastische Tragwerksberechnung unter Ber{\"u}cksichtigung von Teilplastizierungen von Bauteilen in Fließzonen m{\"o}glich.},
  language  = {de}
}
@incollection{StroetmannLohse2015,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_10},
  pages     = {323 -- 431},
  year      = {2015},
  language  = {de}
}
@inproceedings{StopforthFerreinSteinbauer2015,
  author    = {Stopforth, Riaan and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center},
  series = {ICRA 2015 Developing Countries Forum},
  booktitle = {ICRA 2015 Developing Countries Forum},
  pages     = {3 S.},
  year      = {2015},
  abstract  = {Mechatronics consist of the integration of mechanical engineering, electronic integration and computer science/ engineering. These broad fields are essential for robotic systems, yet it makes it difficult for the researchers to specialize and be experts in all these fields. Collaboration between researchers allow for the integration of experience and specialization, to allow optimized systems. Collaboration between the European countries and South Africa is critical, as each country has different resources available, which the other countries might not have. Applications with the need for approval of any restrictions, can also be obtained easier in some countries compared to others, thus preventing the delays of research. Some problems that have been experienced are discussed, with the Robotics Center of South Africa as a possible solution.},
  language  = {en}
}
@inproceedings{SteuerDankertBergLeichtScholten2015,
  author    = {Steuer-Dankert, Linda and Berg, Tobias and Leicht-Scholten, Carmen},
  title     = {Breaking the habit - new approaches in engineering education},
  series = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  booktitle = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  isbn      = {978-2-87352-012-0},
  pages     = {11},
  year      = {2015},
  abstract  = {Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.},
  language  = {en}
}
@incollection{StangelMesekeHahnSteuerDankert2015,
  author    = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda},
  title     = {Der Individualisierungs-Trend pr{\"a}gt die Unternehmenszukunft},
  series = {Diversity Management und Individualisierung},
  booktitle = {Diversity Management und Individualisierung},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-07484-5},
  doi       = {10.1007/978-3-658-07485-2_1},
  pages     = {1 -- 3},
  year      = {2015},
  abstract  = {Laut Zukunftsinstitut (2010) stellt die Individualisierung eine langfristige und nachhaltige Ver{\"a}nderung dar, die die gesamte Gesellschaft (den einzelnen Menschen, Unternehmen, den Staat) betrifft und Auswirkungen auf nahezu alle Lebensbereiche (z. B. Arbeit, Wohnen, Partnerschaft) hat. Die Individualisierung beschreibt dabei die Entwicklung hin zur Fokussierung pers{\"o}nlicher Interessen und Lebensentscheidungen der einzelnen Person (Kunze, Individualisierung, 2011). Der Grund f{\"u}r diese Entwicklung sind laut Kunze (Individualisierung, 2011) Treiber wie steigendes Verm{\"o}gen, Bildung und Mobilit{\"a}t, was die einzelne Person unabh{\"a}ngiger von gr{\"o}ßeren Gemeinschaften macht und mehr Freiheit zur Selbstverwirklichung bietet. Als eine Konsequenz daraus werden Wertevorstellungen nicht mehr einfach hingenommen, sondern f{\"u}r die eigene Person {\"u}berpr{\"u}ft und individualisiert (Kunze, Individualisierung, 2011). So wies Beck bereits 1996 darauf hin, dass Individualisierung meint „erstens die Aufl{\"o}sung und zweitens die Abl{\"o}sung industriegesellschaftlicher Lebensformen durch andere, in denen die Einzelnen ihre Biographie selbst herstellen, inszenieren, zusammenflickschustern m{\"u}ssen" (Beck, Die Erfindung des Politischen, 1996, S. 150).},
  language  = {de}
}
@incollection{StangelMesekeHahnSteuerDankert2015,
  author    = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda},
  title     = {Ausblick: Der individualit{\"a}tsbezogene Diversity Management-Ansatz als Antwort auf Individualisierung},
  series = {Diversity Management und Individualisierung},
  booktitle = {Diversity Management und Individualisierung},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-07485-2},
  pages     = {23 -- 24},
  year      = {2015},
  abstract  = {Der Megatrend Individualisierung fordert von Unternehmen, ihre Strategien und Prozessabl{\"a}ufe bei zunehmender Globalisierung grundlegend zu {\"u}berdenken. W{\"a}hrend Strategien und Prozessabl{\"a}ufe im Unternehmen Standards unterliegen, entwickelt sich unsere Gesellschaft immer st{\"a}rker zu einem individuumszentrierten System, in dem es gilt, Werte und Lebensstile der Individuen zu ber{\"u}cksichtigen und derart wertzusch{\"a}tzen, dass Mitarbeitende motiviert und mit hoher Bindung an das Unternehmen die anstehenden Leistungen f{\"u}r das Unternehmen erbringen. Im Konzept DiM sind Standardisierung und Individualisierung keine gegens{\"a}tzlichen Aspekte, da bei DiM neben der Betrachtung des betriebswirtschaftlichen Nutzens dieses Konzepts f{\"u}r Unternehmen die Wertsch{\"a}tzung des Individuums als genuines Merkmal betont wird.},
  language  = {de}
}
@inproceedings{StahlbergBarnat2015,
  author    = {Stahlberg, Nadine and Barnat, Miriam},
  title     = {Schreiben in der didaktischen Diskussion zum Conceptual Change: Potenziale f{\"u}r das Lernen in MINT-F{\"a}chern},
  series = {Minttendrin Lehre im Dialog : Tagungsband zum 2. HDMINT-Symposium 2015, 24./25. September, Technische Hochschule N{\"u}rnberg Georg Simon Ohm / Diz, Didaktikzentrum},
  booktitle = {Minttendrin Lehre im Dialog : Tagungsband zum 2. HDMINT-Symposium 2015, 24./25. September, Technische Hochschule N{\"u}rnberg Georg Simon Ohm / Diz, Didaktikzentrum},
  pages     = {169 -- 175},
  year      = {2015},
  language  = {de}
}
@misc{StadtmuellerTippkoetterUlber2015,
  author    = {Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Method for production of single-stranded macronucleotides},
  year      = {2015},
  abstract  = {The invention relates to a method for production of single-stranded macronucleotides by amplifying and ligating an extended monomeric single-stranded target nucleic acid sequence (targetss) into a repetitive cluster of double-stranded target nucleic acid sequences (targetds), and subsequently cloning the construct into a vector (aptagene vector). The aptagene vector is transformed into host cells for replication of the aptagene and isolated in order to optain single-stranded target sequences (targetss). The invention also relates to single-stranded nucleic acids, produced by a method of the invention.},
  language  = {en}
}
@incollection{SrivastavaKnolleHoyleretal.2015,
  author    = {Srivastava, Alok and Knolle, Friedhart and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, Ewald},
  title     = {Uranium Toxicity in the State of Punjab in North-Western India},
  series = {Management of Natural Resources in a Changing Environment},
  booktitle = {Management of Natural Resources in a Changing Environment},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12559-6},
  doi       = {10.1007/978-3-319-12559-6_21},
  pages     = {271 -- 275},
  year      = {2015},
  abstract  = {Lately there has been an increasing concern about uranium toxicity in some districts of Punjab State located in the North Western part of India after the publication of a report (Blaurock-Busch et al. 2010) which showed that the concentration of uranium in hair and urine of children suffering from physical deformities, neurological and mental disorder from Malwa region (Fig. 1) of Punjab State was manifold higher than the reference ranges. A train which connects the affected region with the nearby city of Bikaner which has a Cancer Hospital has been nicknamed as Cancer Express due to the frenzy generated on account of uranium related toxicity.},
  language  = {en}
}
@inproceedings{SrivastavaKnolleSchnugetal.2015,
  author    = {Srivastava, Alok and Knolle, F. and Schnug, E. and Scherer, Ulrich W.},
  title     = {Study of Trace Elements in Water Bodies of the Harz Mts. Region, Germany using Total Reflection X Ray Fluorescence (TXRF)},
  series = {DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015},
  booktitle = {DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015},
  pages     = {355 -- 356},
  year      = {2015},
  language  = {de}
}
@inproceedings{SirazitdinovaDulzonMueller2015,
  author    = {Sirazitdinova, Y. and Dulzon, A. and M{\"u}ller, Burghard},
  title     = {Project management practices in engineering university},
  series = {21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015},
  booktitle = {21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015},
  doi       = {10.1088/1757-899X/93/1/012080},
  pages     = {4 S.},
  year      = {2015},
  language  = {en}
}
@article{SiersHoepner2015,
  author    = {Siers, Carsten and Hoepner, Gert},
  title     = {Vertriebskompass 2016 - die Herausforderungen},
  series = {Vertriebsmanager : Magazin f{\"u}r modernes Vertriebsmanagement},
  volume    = {2015},
  journal   = {Vertriebsmanager : Magazin f{\"u}r modernes Vertriebsmanagement},
  publisher = {Quadriga Media Berlin GmbH},
  address   = {Berlin},
  issn      = {1610-5060 ; 2199-1588},
  year      = {2015},
  language  = {de}
}
@article{SeynnesBojsenMollerAlbrachtetal.2015,
  author    = {Seynnes, O. R. and Bojsen-Moller, J. and Albracht, Kirsten and Arndt, A. and Cronin, N. J. and Finni, T. and Magnusson, S. P.},
  title     = {Ultrasound-based testing of tendon mechanical properties: a critical evaluation},
  series = {Journal of Applied Physiology},
  volume    = {118},
  journal   = {Journal of Applied Physiology},
  number    = {2},
  issn      = {8750-7587},
  doi       = {10.1152/japplphysiol.00849.2014},
  pages     = {133 -- 141},
  year      = {2015},
  language  = {en}
}
@article{SeifarthGossmannGrosseetal.2015,
  author    = {Seifarth, Volker and Goßmann, Matthias and Grosse, J. O. and Becker, C. and Heschel, I. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds},
  series = {Urologia Internationalis},
  volume    = {2015},
  journal   = {Urologia Internationalis},
  number    = {95},
  publisher = {Karger},
  address   = {Basel},
  issn      = {0042-1138},
  doi       = {10.1159/000368419},
  pages     = {106 -- 113},
  year      = {2015},
  language  = {en}
}
@phdthesis{Seifarth2015,
  author    = {Seifarth, Volker},
  title     = {Ureteral tissue engineering : development of a bioreactor system and subsequent characterization of the generated biohybrids},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {en}
}