@book{Laack2015,
  author    = {Laack, Walter van},
  title     = {Unser Schl{\"u}ssel zur Ewigkeit},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-16-8},
  pages     = {316 S.},
  year      = {2015},
  language  = {de}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances},
  series = {Acta Geotechnica},
  volume    = {10},
  journal   = {Acta Geotechnica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1133},
  doi       = {10.1007/s11440-014-0311-6},
  pages     = {219 -- 229},
  year      = {2015},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Design of plane energy geostructures based on laboratory tests and numerical modelling},
  series = {Energy and Buildings},
  volume    = {107},
  journal   = {Energy and Buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0378-7788},
  doi       = {10.1016/j.enbuild.2015.08.039},
  pages     = {434 -- 444},
  year      = {2015},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Besonderheiten bei der Planung und Berechnung von oberfl{\"a}chennahen thermo-aktiven Bauteilen},
  series = {Geotechnik},
  volume    = {38},
  journal   = {Geotechnik},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2190-6653},
  doi       = {10.1002/gete.201500002},
  pages     = {107 -- 119},
  year      = {2015},
  language  = {de}
}
@incollection{KuemmellHillgaertner2015,
  author    = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael},
  title     = {Inductive charging comfortable and nonvisible charging stations for urbanised areas},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_16},
  pages     = {297 -- 309},
  year      = {2015},
  abstract  = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.},
  language  = {en}
}
@article{KuschRieserKnuppetal.2015,
  author    = {Kusch, Peter and Rieser, Claudia and Knupp, Gerd and Mang, Thomas},
  title     = {Characterization of copolymers of methacrylic acid with poly(ethylene glycol) methyl ether methacrylate macromonomers by analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS)},
  series = {Journal of Analytical and Applied Pyrolysis},
  volume    = {Vol. 113},
  journal   = {Journal of Analytical and Applied Pyrolysis},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0165-2370},
  doi       = {10.1016/j.jaap.2015.03.003},
  pages     = {412 -- 418},
  year      = {2015},
  language  = {de}
}
@book{Kurz2015,
  author    = {Kurz, Melanie},
  title     = {Handwerk oder Design : zur {\"A}sthetik des Handgemachten},
  publisher = {Fink},
  address   = {Paderborn},
  isbn      = {978-3-7705-5943-5 (Druckausgabe)},
  doi       = {10.30965/9783846759431},
  pages     = {280 Seiten},
  year      = {2015},
  abstract  = {Manuelle Herstellung ist sozial fair, {\"o}kologisch nachhaltig und schafft qualit{\"a}tsvolle Erzeugnisse! Vorbote f{\"u}r eine großformatige R{\"u}ckkehr zum Handwerk und zur eigenh{\"a}ndigen Fertigung ist die Maker-Bewegung! - Solche Thesen begegnen uns gegenw{\"a}rtig oft. Journalistische Texte, Filmdokumentationen, Werbung oder die {\"A}sthetik von Produkten sind ihre Vehikel. Doch wie ist es um die Wiederbelebung des Handwerks tats{\"a}chlich bestellt? Und in welchem Verh{\"a}ltnis steht das Design - ein durch und durch industriebasiertes Berufsfeld - zu vorindustriellen Produktionsweisen? Diesen Fragen geht das vorliegende Buch ebenso auf den Grund wie der seit Beginn der Industrialisierung auftretenden Handwerksromantik. Es untersucht zudem, wie aktuelles Design die Sehnsucht nach dem Urspr{\"u}nglichen mit formalen Kodes beantwortet und wie die visuellen Erscheinungsformen des Handgemachten ihre Wirkung freisetzen.},
  language  = {de}
}
@article{KuperjansWeitzel2015,
  author    = {Kuperjans, Isabel and Weitzel, J.},
  title     = {Energiedesign 2020 : Sichere Strom- und W{\"a}rmeversorgung f{\"u}r die Industrie},
  series = {TAB: das Fachmedium der TGA-Branche},
  journal   = {TAB: das Fachmedium der TGA-Branche},
  number    = {3},
  publisher = {Bauverlag},
  address   = {G{\"u}tersloh},
  issn      = {0341-2032},
  pages     = {105 -- 107},
  year      = {2015},
  language  = {de}
}
@article{KubalskiButenweg2015,
  author    = {Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modelling strategies for horizontally loaded infill masonry},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 19},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 5},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/dama.201500675},
  pages     = {363 -- 369},
  year      = {2015},
  language  = {de}
}
@inproceedings{KubalskiButenweg2015,
  author    = {Kubalski, T. and Butenweg, Christoph},
  title     = {Ausfachungsmauerwerk unter kombinierter seismischer Beanspruchung},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {117 -- 122},
  year      = {2015},
  language  = {de}
}
@inproceedings{KrueckelNoldenFerreinetal.2015,
  author    = {Kr{\"u}ckel, Kai and Nolden, Florian and Ferrein, Alexander and Scholl, Ingrid},
  title     = {Intuitive visual teleoperation for UGVs using free-look augmented reality displays},
  series = {2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA},
  booktitle = {2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA},
  doi       = {10.1109/ICRA.2015.7139809},
  pages     = {4412 -- 4417},
  year      = {2015},
  language  = {en}
}
@inproceedings{KronhardtAlexopoulosReisseletal.2015,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Latzke, Markus and Rendon, C. and Sattler, Johannes, Christoph and Herrmann, Ulf},
  title     = {Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant J{\"u}lich using optimized control strategies of the storage system},
  series = {Energy procedia},
  booktitle = {Energy procedia},
  issn      = {1876-6102},
  pages     = {1 -- 6},
  year      = {2015},
  language  = {en}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Art. 5 Rom III-Regulation (choice of applicable law by the parties)},
  series = {Rome Regulations : commentary},
  booktitle = {Rome Regulations : commentary},
  editor    = {Calliess, Gralf-Peter},
  edition   = {2nd ed.},
  publisher = {Wolters Kluwer},
  isbn      = {9789041147547},
  year      = {2015},
  language  = {en}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Art. 7 Rome III-Regulation (formal validity)},
  series = {Rome Regulations : commentary},
  booktitle = {Rome Regulations : commentary},
  editor    = {Colliess, Gralf-Peter},
  edition   = {2nd ed.},
  publisher = {Wolters Kluwer},
  isbn      = {9789041147547},
  year      = {2015},
  language  = {en}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Kommentierung zu EU-EheG{\"u}terVO-E},
  series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV},
  booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV},
  editor    = {Rauscher, Thomas},
  edition   = {4., neu bearbeitete Auflage},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {978-3-504-38437-1},
  doi       = {10.9785/9783504384371-007},
  pages     = {1081 -- 1146},
  year      = {2015},
  language  = {de}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Kommentierung zu EU-LP-G{\"u}terVO},
  series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV},
  booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV},
  editor    = {Rauscher, Thomas},
  edition   = {4., neu bearbeitete Auflage},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {978-3-504-38437-1},
  doi       = {10.9785/9783504384371-008},
  pages     = {1147 -- 1188},
  year      = {2015},
  language  = {de}
}
@article{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Anforderungen des Unionsrechts an die standardisierte Darstellung des Namens : Anmerkung zu EuGH, Urt. v. 2. Oktober 2014, Rs. C-101/13 - Stadt Karlsruhe},
  series = {GRP : Zeitschrift f{\"u}r das Privatrecht der Europ{\"a}ischen Union},
  journal   = {GRP : Zeitschrift f{\"u}r das Privatrecht der Europ{\"a}ischen Union},
  number    = {6},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2193-9519},
  pages     = {282 -- 285},
  year      = {2015},
  language  = {de}
}
@article{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Anmerkung zu OLG M{\"u}nchen: Erbscheinserteilung nach Eintritt des Nacherbfalls, Beschl. v. 1.10.2014 - Wx 314/14},
  series = {DNotZ - Deutsche Notar-Zeitschrift},
  journal   = {DNotZ - Deutsche Notar-Zeitschrift},
  number    = {5},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0340-8604},
  pages     = {385 -- 390},
  year      = {2015},
  language  = {de}
}
@inproceedings{KremersPieper2015,
  author    = {Kremers, Alexander and Pieper, Martin},
  title     = {Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software},
  series = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  booktitle = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  publisher = {COMSOL},
  address   = {G{\"o}ttingen ; Berlin},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@article{KonstantinidisFloresMartinezDachwaldetal.2015,
  author    = {Konstantinidis, Konstantinos and Flores Martinez, Claudio and Dachwald, Bernd and Ohndorf, Andreas and Dykta, Paul and Bowitz, Pascal and Rudolph, Martin and Digel, Ilya and Kowalski, Julia and Voigt, Konstantin and F{\"o}rstner, Roger},
  title     = {A lander mission to probe subglacial water on Saturn's moon enceladus for life},
  series = {Acta astronautica},
  volume    = {Vol. 106},
  journal   = {Acta astronautica},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2030 (E-Journal); 0094-5765 (Print)},
  pages     = {63 -- 89},
  year      = {2015},
  language  = {en}
}
@inproceedings{KonstantinidisKowalskiMartinezetal.2015,
  author    = {Konstantinidis, K. and Kowalski, Julia and Martinez, C. F. and Dachwald, Bernd and Ewerhart, D. and F{\"o}rstner, R.},
  title     = {Some necessary technologies for in-situ astrobiology on enceladus},
  series = {Proceedings of the International Astronautical Congress},
  booktitle = {Proceedings of the International Astronautical Congress},
  isbn      = {978-151081893-4},
  pages     = {1354 -- 1372},
  year      = {2015},
  language  = {en}
}
@inproceedings{KolditzAlbrachtFasseetal.2015,
  author    = {Kolditz, Melanie and Albracht, Kirsten and Fasse, Alessandro and Albin, Thivaharan and Br{\"u}ggemann, Gert-Peter and Abel, Dirk},
  title     = {Evaluation of an industrial robot as a leg press training device},
  series = {XV International Symposium on Computer Simulation in Biomechanics July 9th - 11th 2015, Edinburgh, UK},
  booktitle = {XV International Symposium on Computer Simulation in Biomechanics July 9th - 11th 2015, Edinburgh, UK},
  pages     = {41 -- 42},
  year      = {2015},
  language  = {en}
}
@inproceedings{KolditzAlbinFasseetal.2015,
  author    = {Kolditz, Melanie and Albin, Thivaharan and Fasse, Alessandro and Br{\"u}ggemann, Gert-Peter and Abel, Dirk and Albracht, Kirsten},
  title     = {Simulative Analysis of Joint Loading During Leg Press Exercise for Control Applications},
  series = {IFAC-PapersOnLine},
  volume    = {48},
  booktitle = {IFAC-PapersOnLine},
  number    = {20},
  doi       = {10.1016/j.ifacol.2015.10.179},
  pages     = {435 -- 440},
  year      = {2015},
  language  = {en}
}
@article{KlingeOttoMuehl2015,
  author    = {Klinge, Uwe and Otto, Jens and M{\"u}hl, Thomas},
  title     = {High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain},
  series = {BioMed Research International},
  volume    = {2015},
  journal   = {BioMed Research International},
  issn      = {2314-6133 (Print)},
  doi       = {10.1155/2015/953209},
  pages     = {7 pages},
  year      = {2015},
  language  = {en}
}
@article{KlettkeHomburgGell2015,
  author    = {Klettke, Tanja and Homburg, Carsten and Gell, Sebastian},
  title     = {How to measure analyst forecast effort},
  series = {European Accounting Review},
  volume    = {24},
  journal   = {European Accounting Review},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {0963-8180},
  doi       = {10.1080/09638180.2014.909291},
  pages     = {129 -- 146},
  year      = {2015},
  abstract  = {We introduce a new way to measure the forecast effort that analysts devote to their earnings forecasts by measuring the analyst's general effort for all covered firms. While the commonly applied effort measure is based on analyst behaviour for one firm, our measure considers analyst behaviour for all covered firms. Our general effort measure captures additional information about analyst effort and thus can identify accurate forecasts. We emphasise the importance of investigating analyst behaviour in a larger context and argue that analysts who generally devote substantial forecast effort are also likely to devote substantial effort to a specific firm, even if this effort might not be captured by a firm-specific measure. Empirical results reveal that analysts who devote higher general forecast effort issue more accurate forecasts. Additional investigations show that analysts' career prospects improve with higher general forecast effort. Our measure improves on existing methods as it has higher explanatory power regarding differences in forecast accuracy than the commonly applied effort measure. Additionally, it can address research questions that cannot be examined with a firm-specific measure. It provides a simple but comprehensive way to identify accurate analysts.},
  language  = {en}
}
@inproceedings{KilicRaatschenAstanehAsletal.2015,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.},
  title     = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge},
  series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781138027572},
  pages     = {1169 -- 1173},
  year      = {2015},
  language  = {en}
}
@techreport{KestiMononenLautsoetal.2015,
  author    = {Kesti, Jyrki and Mononen, Tarmo and Lautso, Petteri and D{\"o}ring, Bernd and Reger, Vitali and Holopainen, R. and Jung, N. and Shemeikka, J. and Nieminen, J. and Reda, F. and Lawson, Mark and Botti, Andrea and Hall, R. and Zold, A. and Buday, T.},
  title     = {Zero energy solutions for multifunctional steel intensive commercial buildings (ZEMUSIC) - EUR 27627},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-54071-4},
  issn      = {1831-9424},
  doi       = {10.2777/111520},
  pages     = {146 Seiten},
  year      = {2015},
  abstract  = {The broad commercial objective of this project was the sustainable value creation in steel building technology by addressing the ways in which significant energy reductions can be made in the operation phase of multi-storey commercial buildings. A review on energy efficient commercial buildings in Europe has been carried out consisting of several case studies from different countries. The project included development of zero-energy concepts for reducing energy demand as well as concepts for heating, cooling and ventilation systems by utilising renewable energy sources in three different climates. Also alternative structural frame solutions were developed and analyzed in respect of structural and MEP (mechanical, electrical and plumbing solutions) features. An innovative long span floor system with integrated MEP routings promises a cost effective alternative for sophisticated ventilation distribution and radiant heating and cooling systems, allowing for high energy efficiency and high quality interior climate. The report includes also review of best architectural practices for integrated renewable energy solutions including different design strategies for building facades of zero energy buildings. Interesting results and design basis are also presented for steel energy pile concept, where structural foundation piles are utilized for ground energy harvesting. Life cycle cost calculations for near zero energy office building based on developed technologies show that a near zero energy construction is also profitable. The results and work methods of the project have been summarized in the form of design guidance that offers designers the knowledge gained in a form that can be easily understood.},
  language  = {en}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}
@book{KernWettingfeld2015,
  author    = {Kern, Alexander and Wettingfeld, J{\"u}rgen},
  title     = {Blitzschutzsysteme 2 : Schutz f{\"u}r besondere bauliche Anlagen ; Schutz f{\"u}r elektrische und elektronische Systeme in baulichen Anlagen ; Erl{\"a}uterungen zu den Normen DIN EN 62305-3 (VDE 0185-305-3):2011-10, DIN EN 62305-4 (VDE 0185-305-4):2011-10. (VDE-Schriftenreihe Normen verst{\"a}ndlich ; 160)},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-8007-3653-9},
  pages     = {247 S.},
  year      = {2015},
  language  = {de}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@book{JanserHavermann2015,
  author    = {Janser, Frank and Havermann, Marc},
  title     = {Inkompressible Str{\"o}mungen},
  edition   = {3. Aufl.},
  publisher = {Verlagshaus Mainz GmbH},
  address   = {Aachen},
  isbn      = {978-3-86130-446-3},
  pages     = {VIII, 83 S. : Ill ; Diagramme},
  year      = {2015},
  language  = {de}
}
@book{IomdinaBauerKotliar2015,
  author    = {Iomdina, E. N. and Bauer, S. M. and Kotliar, Konstantin},
  title     = {БИОМЕХАНИКА ГЛАЗА: ТЕОРЕТИЧЕСКИЕ АСПЕКТЫ И КЛИНИЧЕСКИЕ ПРИЛОЖЕНИЯ},
  publisher = {Real Time},
  address   = {Moscow},
  isbn      = {978-5-903025-57-2},
  pages     = {208 Seiten},
  year      = {2015},
  language  = {ru}
}
@inproceedings{HoeflerKneerGrossetal.2015,
  author    = {H{\"o}fler, M. and Kneer, R. and Groß, Rolf Fritz and Kehrmann, K.},
  title     = {Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows},
  series = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  booktitle = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  editor    = {Vorobieff, P.},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-84564-946-3 (Print-Ausgabe)},
  issn      = {1746-4471},
  pages     = {89 -- 101},
  year      = {2015},
  language  = {en}
}
@misc{HuschyarTippkoetterUlber2015,
  author    = {Huschyar, Al-Kaidy and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {System und Verfahren zur Durchf{\"u}hrung von chemischen, biologischen oder physikalischen Reaktionen},
  year      = {2015},
  language  = {de}
}
@article{HuckPoghossianBaeckeretal.2015,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Kramer, Friederike and Begoyan, Vardges K. and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter sensing using high-k oxide of barium strontium titanate},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431911},
  pages     = {1259},
  year      = {2015},
  abstract  = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.},
  language  = {en}
}
@article{HoughNalwalkDingetal.2015,
  author    = {Hough, Lindsay B. and Nalwalk, Julia W. and Ding, Xinxin and Scheer, Nico},
  title     = {Opioid Analgesia in P450 Gene Cluster Knockout Mice: A Search for Analgesia-Relevant Isoforms},
  series = {Drug Metabolism and Disposition},
  volume    = {43},
  journal   = {Drug Metabolism and Disposition},
  number    = {9},
  issn      = {1521-009x},
  doi       = {10.1124/dmd.115.065490},
  pages     = {1326 -- 1330},
  year      = {2015},
  language  = {en}
}
@inproceedings{HorikawaOkadaKazarietal.2015,
  author    = {Horikawa, Atsushi and Okada, Kunio and Kazari, Masahide and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haj Ayed, Anis},
  title     = {Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design},
  series = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  isbn      = {978-4-89111-008-6},
  pages     = {141 -- 146},
  year      = {2015},
  language  = {en}
}
@inproceedings{HorikawaKazariOkadaetal.2015,
  author    = {Horikawa, Atsushi and Kazari, Masahide and Okada, Kunio and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haji Ayed, Anis},
  title     = {Developments of Hydrogen Dry Low Emission Combustion Technology},
  series = {Annual Congress of Gas Turbine Society Japan, 2015},
  booktitle = {Annual Congress of Gas Turbine Society Japan, 2015},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@article{HoevelerJanserBindewaldetal.2015,
  author    = {Hoeveler, Bastian and Janser, Frank and Bindewald, Thorsten and Gebhardt, Andreas},
  title     = {Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {12},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42921},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {de}
}
@techreport{HoepnerSiers2015,
  author    = {Hoepner, Gert and Siers, Carsten},
  title     = {7. Studie Vertriebskompass 2015/2016 / durchgef{\"u}hrt von der FH Aachen und der Siers \& Collegen GmbH},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {42 Bl.},
  year      = {2015},
  language  = {de}
}
@inproceedings{HeuermannSadeghfam2015,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Universaler Plasmajet f{\"u}r verschiedene Behandlungsschritte der Klebetechnik},
  series = {Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. M{\"a}rz 2015, Maternushaus, K{\"o}ln / DECHEMA},
  booktitle = {Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. M{\"a}rz 2015, Maternushaus, K{\"o}ln / DECHEMA},
  address   = {K{\"o}ln},
  pages     = {85 -- 87},
  year      = {2015},
  language  = {de}
}
@article{HendersonMclaughlinScheeretal.2015,
  author    = {Henderson, Colin J. and Mclaughlin, Lesley A. and Scheer, Nico and Stanley, Lesley A. and Wolf, C. Roland},
  title     = {Cytochrome b5 Is a Major Determinant of Human Cytochrome P450 CYP2D6 and CYP3A4 Activity In Vivo s},
  series = {Molecular Pharmacology},
  volume    = {87},
  journal   = {Molecular Pharmacology},
  number    = {4},
  publisher = {ASPET},
  address   = {Bethesda},
  issn      = {1521-0111},
  doi       = {10.1124/mol.114.097394},
  pages     = {733 -- 739},
  year      = {2015},
  language  = {en}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{HauserKotliarTholenetal.2015,
  author    = {Hauser, C. and Kotliar, Konstantin and Tholen, S. and Hasenau, A. and Suttmann, Y. and Renders, L. and Heemann, U. and Baumann, M. and Schmaderer, C.},
  title     = {Dynamische retinale Gef{\"a}ßreaktion bei H{\"a}modialysepatienten},
  series = {Nieren- und Hochdruckkrankheiten},
  volume    = {44},
  journal   = {Nieren- und Hochdruckkrankheiten},
  number    = {11},
  publisher = {Dustri-Verlag},
  address   = {Oberhaching},
  issn      = {0300-5224},
  doi       = {10.5414/NHX01743a},
  pages     = {480 -- 480},
  year      = {2015},
  language  = {de}
}
@book{Hallmann2015,
  author    = {Hallmann, Willi},
  title     = {(Meine) Erinnerungen an Jesco von Puttkamer : zusammengestellt anl{\"a}sslich des Todes von Jesco von Puttkamer am 27. Dezember 2012},
  publisher = {Pro BUSINESS digital printing Deutschlang GmbH},
  address   = {Berlin},
  isbn      = {978-3-86460-271-9 ; 3-86460-271-8},
  pages     = {178 Seiten},
  year      = {2015},
  language  = {de}
}
@article{HajAyedKustererFunkeetal.2015,
  author    = {Haj Ayed, A. and Kusterer, K. and Funke, Harald and Keinz, Jan and Striegan, Constantin and Bohn, D.},
  title     = {Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine},
  series = {Propulsion and power research},
  volume    = {Vol. 4},
  journal   = {Propulsion and power research},
  number    = {Iss. 3},
  issn      = {2212-540X},
  doi       = {10.1016/j.jppr.2015.07.005},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{HajAyedKustererFunkeetal.2015,
  author    = {Haj Ayed, A. and Kusterer, K. and Funke, Harald and Keinz, Jan and Striegan, Constantin and Bohn, D.},
  title     = {Improvement study for the dry-low-NOx hydrogen micromix combustion technology},
  series = {Propulsion and power research},
  volume    = {Vol. 4},
  journal   = {Propulsion and power research},
  number    = {Iss. 3},
  issn      = {2212-540X},
  doi       = {10.1016/j.jppr.2015.07.003},
  pages     = {132 -- 140},
  year      = {2015},
  language  = {en}
}
@article{HagerHentschkeHojdisetal.2015,
  author    = {Hager, Jonathan and Hentschke, Reinhard and Hojdis, Nils and Karimi-Varzaneh, Hossein Ali},
  title     = {Computer Simulation of Particle-Particle Interaction in a Model Polymer Nanocomposite},
  series = {Macromolecules},
  volume    = {48},
  journal   = {Macromolecules},
  number    = {24},
  issn      = {1520-5835},
  doi       = {10.1021/acs.macromol.5b01864},
  pages     = {9039 -- 9049},
  year      = {2015},
  language  = {en}
}
@inproceedings{GoettscheKornAmato2015,
  author    = {G{\"o}ttsche, Joachim and Korn, Michael and Amato, Alexandre},
  title     = {The Passivhaus concept for the Arabian Peninsula - An energetic-economical evaluation considering the thermal comfort},
  series = {QScience Proceedings: Vol 2015},
  booktitle = {QScience Proceedings: Vol 2015},
  doi       = {10.5339/qproc.2015.qgbc.38},
  pages     = {8 Seiten},
  year      = {2015},
  abstract  = {The Passivhaus building standard is a concept developed for the realization of energy-efficient and economical buildings with a simultaneous high utilization comfort under European climate conditions. Major elements of the Passivhaus concept are a high thermal insulation of the external walls, the use of heat and/or solar shading glazing as well as an airtight building envelope in combination with energy-efficient technical building installations and heating or cooling generators, such as an efficient energy-recovery in the building air-conditioning. The objective of this research project is the inquiry to determine the parameters or constraints under which the Passivhaus concept can be implemented under the arid climate conditions in the Arabian Peninsula to achieve an energy-efficient and economical building with high utilization comfort. In cooperation between the Qatar Green Building Council (QGBC), Barwa Real Estate (BRE) and Kahramaa the first Passivhaus was constructed in Qatar and on the Arabian Peninsula in 2013. The Solar-Institut J{\"u}lich of Aachen University of Applied Science supports the Qatar Green Building Council with a dynamic building and equipment simulation of the Passivhaus and the neighbouring reference building. This includes simulation studies with different component configurations for the building envelope and different control strategies for heating or cooling systems as well as the air conditioning of buildings to find an energetic-economical optimum. Part of these analyses is the evaluation of the energy efficiency of the used energy recovery system in the Passivhaus air-conditioning and identification of possible energy-saving effects by the use of a bypass function integrated in the heat exchanger. In this way it is expected that on an annual basis the complete electricity demand of the building can be covered by the roof-integrated PV generator.},
  language  = {en}
}
@inproceedings{GrundmannLangeDachwaldetal.2015,
  author    = {Grundmann, Jan Thimo and Lange, Caroline and Dachwald, Bernd and Grimm, Christian and Koch, Aaron and Ulamec, Stephan},
  title     = {Small Spacecraft in Planetary Defence Related Applications-Capabilities, Constraints, Challenges},
  series = {IEEE Aerospace Conference},
  booktitle = {IEEE Aerospace Conference},
  pages     = {1 -- 18},
  year      = {2015},
  abstract  = {In this paper we present an overview of the characteristics and peculiarities of small spacecraft missions related to planetary defence applications. We provide a brief overview of small spacecraft missions to small solar system bodies. On this background we present recent missions and selected projects and related studies at the German Aerospace Center, DLR, that contribute to planetary defence related activities. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander recently arrived on comet 67P/Churyumov-Gerasimenko aboard ESA's ROSETTA comet rendezvous mission, and the Mobile Asteroid Surface Scout, MASCOT, now underway to near-Earth asteroid (162173) 1999 JU3 aboard the Japanese sample-return probe HAYABUSA-2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact \& Deflection Assessment), a joint effort of ESA,JHU/APL, NASA, OCA and DLR, combining JHU/APL's DART (Double Asteroid Redirection Test) and ESA's AIM (Asteroid Impact Monitor) spacecraft in a mission towards near-Eath binary asteroid (65803) Didymos.},
  language  = {en}
}