@inproceedings{SirazitdinovaDulzonMueller2015,
  author    = {Sirazitdinova, Y. and Dulzon, A. and M{\"u}ller, Burghard},
  title     = {Project management practices in engineering university},
  series = {21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015},
  booktitle = {21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015},
  doi       = {10.1088/1757-899X/93/1/012080},
  pages     = {4 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{TreulingCzarneckiWolf2023,
  author    = {Treuling, Clemens and Czarnecki, Christian and Wolf, Martin R.},
  title     = {Projekt WiLMo - Wirtschaftsinformatik Lehr- und Lernmodule},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  pages     = {161 -- 169},
  year      = {2023},
  abstract  = {Die potenziellen Auswirkungen der Digitalisierung auf die Lehre sind seit langem Gegenstand ausf{\"u}hrlicher Diskussionen innerhalb der Wirtschaftsinformatik (WI) (z. B. in Auth et al. 2021, Barton et al. 2019, Klotz et al. 2019). Nicht zuletzt der in nahezu allen Wirtschaftszweigen bestehende Mangel an qualifizierten Fachkr{\"a}ften lenkt den Diskurs auf einen verbesserten Zugang zu Bildung und gleichen Bildungschancen. Aus dieser Vision heraus und dem Schub der Digitalisierung entstehen Bildungskonzepte wie Open Educational Resources (OER), die gesellschaftlichen Problemen, wie dem des Fachkr{\"a}ftemangels, entgegenwirken sollen. Im Rahmen dieses Kurzbeitrags wird das Projekt WiLMo - "Wirtschaftsinformatik Lehr- und Lernmodule" vorgestellt. WiLMo wird im Rahmen von OERContent.nrw unter Beteiligung von sechs Hochschulen entwickelt und gef{\"o}rdert. Alle Projektbeteiligten arbeiten gemeinsam daran, einheitliche digitale Lehr- und Lernmaterialien im OER-Format f{\"u}r die Kernmodule der Wirtschaftsinformatik zu entwickeln und in garantiert hoher Qualit{\"a}t zur Verf{\"u}gung zu stellen.},
  language  = {de}
}
@inproceedings{Klocke2011,
  author    = {Klocke, Martina},
  title     = {Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik},
  series = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen},
  booktitle = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen},
  pages     = {1 -- 25},
  year      = {2011},
  language  = {de}
}
@inproceedings{BaumannTeixeiraBouraEcksteinetal.2012,
  author    = {Baumann, Torsten and Teixeira Boura, Cristiano Jos{\´e} and Eckstein, Julian and Dabrowski, Jan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Zunft, Stefan},
  title     = {Properties of bulk materials for high-temperature air-sand heat exchangers},
  series = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 2},
  booktitle = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 2},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Solar Energy Society},
  isbn      = {978-1-61839-364-7},
  pages     = {1270 -- 1278},
  year      = {2012},
  language  = {en}
}
@inproceedings{SeboldtBlomeDachwaldetal.2004,
  author    = {Seboldt, Wolfgang and Blome, Hans-Joachim and Dachwald, Bernd and Richter, Lutz},
  title     = {Proposal for an integrated European space exploration strategy},
  series = {55th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Institute of Space Law},
  booktitle = {55th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Institute of Space Law},
  pages     = {1 -- 10},
  year      = {2004},
  abstract  = {Recently, in his vision for space exploration, US president Bush announced to extend human presence across the solar system, starting with a human return to the Moon as early as 2015 in preparation for human exploration of Mars and other destinations. In Europe, an exploration program, termed AURORA, was established by ESA in 2001 - funded on a voluntary basis by ESA member states - with a clear focus on Mars and the ultimate goal of landing humans on Mars around 2030 in international cooperation. In 2003, a Human Spaceflight Vision Group was appointed by ESA with the task to develop a vision for the role of human spaceflight during the next quarter of the century. The resulting vision focused on a European-led lunar exploration initiative as part of a multi-decade, international effort to strengthen European identity and economy. After a review of the situation in Europe concerning space exploration, the paper outlines an approach for a consistent positioning of exploration within the existing European space programs, identifies destinations, and develops corresponding scenarios for an integrated strategy, starting with robotic missions to the Moon, Mars, and near-Earth asteroids. The interests of the European planetary in-situ science community, which recently met at DLR Cologne, are considered. Potential robotic lunar missions comprise polar landings to search for frozen volatiles and a sample return. For Mars, the implementation of a modest robotic landing mission in 2009 to demonstrate the capability for landing and prepare more ambitious and complex missions is discussed. For near-Earth asteroid exploration, a low-cost in-situ technology demonstration mission could yield important results. All proposed scenarios offer excellent science and could therefore create synergies between ESA's mandatory and optional programs in the area of planetary science and exploration. The paper intents to stimulate the European discussion on space exploration and reflects the personal view of the authors.},
  language  = {en}
}
@inproceedings{HippeFingerGoettenetal.2020,
  author    = {Hippe, Jonas and Finger, Felix and G{\"o}tten, Falk and Braun, Carsten},
  title     = {Propulsion System Qualification of a 25 kg VTOL-UAV: Hover Performance of Single and Coaxial Rotors and Wind-Tunnel Experiments on Cruise Propellers},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  year      = {2020},
  abstract  = {This paper presents an approach for UAV propulsion system qualification and validation on the example of FH Aachen's 25 kg cargo UAV "PhoenAIX". Thrust and power consumption are the most important aspects of a propulsion system's layout. In the initial design phase, manufacturers' data has to be trusted, but the validation of components is an essential step in the design process. This process is presented in this paper. The vertical takeoff system is designed for efficient hover; therefore, performance under static conditions is paramount. Because an octo-copter layout with coaxial rotors is considered, the impact of this design choice is analyzed. Data on thrust, voltage stability, power consumption, rotational speed, and temperature development of motors and controllers are presented for different rotors. The fixed-wing propulsion system is designed for efficient cruise flight. At the same time, a certain static thrust has to be provided, as the aircraft needs to accelerate to cruise speed. As for the hover-system, data on different propellers is compared. The measurements were taken for static conditions, as well as for different inflow velocities, using the FH-Aachen's wind-tunnel.},
  language  = {en}
}
@inproceedings{PlatenPoghossianSchoening2006,
  author    = {Platen, J. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Pr{\"a}paration von selbstjustierenden Nanostrukturen mittels Schichtausdehnungstechnik},
  series = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau},
  booktitle = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau},
  publisher = {VDE Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2939-3},
  pages     = {277 -- 280},
  year      = {2006},
  language  = {de}
}
@inproceedings{Anthrakidis2012,
  author    = {Anthrakidis, Anette},
  title     = {Pr{\"u}feinrichtung zur Bestimmung der Leistungsf{\"a}higkeit von solarthermischen Kollektoren bis 200 Grad C},
  series = {22. Symposium Thermische Solarenergie : 09. bis 11. Mai 2012, Kloster Banz, Bad Staffelstein},
  booktitle = {22. Symposium Thermische Solarenergie : 09. bis 11. Mai 2012, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI},
  address   = {Regensburg},
  isbn      = {978-3-941785-89-2},
  pages     = {134 -- 135},
  year      = {2012},
  language  = {de}
}
@inproceedings{BuxbaumSchwarteRingbecketal.2000,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and Heß, H. and Grothof, M.},
  title     = {Pseudo-Noise Laserradar zur schnellen 3D-Aufnahme auf Basis der PMD-Smart-Pixel Technologie - Prinzip und experimentelle Verifikation},
  series = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)},
  booktitle = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091572-2},
  issn      = {0083-5560},
  pages     = {49 -- 59},
  year      = {2000},
  language  = {de}
}
@inproceedings{MelissNeskakisUsbecketal.1992,
  author    = {Meliß, Michael and Neskakis, A. and Usbeck, S. and Vogelsang, E. and Wagner, L. and Wiediger, J{\"u}rgen},
  title     = {PV-transmitter and receiver},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {375 -- 380},
  year      = {1992},
  language  = {en}
}
@inproceedings{SchneiderWisselinkCzarnecki2017,
  author    = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian},
  title     = {Qualitative Wertsch{\"o}pfungsanalyse von Anwendungsf{\"a}llen des Narrowband Internet of Things},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {184 -- 193},
  year      = {2017},
  abstract  = {Prim{\"a}re Ziele des Internets der Dinge sind die Steuerung physischer Gegenst{\"a}nde aus der Distanz und das Erfassen von Informationen aus dem Umfeld dieser Gegenst{\"a}nde. Dazu werden Hardwarekomponenten in Gegenst{\"a}nde des t{\"a}glichen Lebens und die Umwelt integriert. Mithilfe von Informations- und Kommunikationstechnologien entsteht hieraus das Internet der Dinge (Internet of Things, IoT). Vor einem Jahr wurde mit Narrowband Internet of Things (NB-IoT) eine Technologie die es erm{\"o}glicht, Hardwarekomponenten energieeffizient und unmittelbar {\"u}ber das Mobilfunknetz zu vernetzen. Gegenst{\"a}nde werden dadurch {\"u}ber große Reichweiten eigenst{\"a}ndig kommunikationsf{\"a}hig. Das IoT steht mit NB-IoT vor einem gestiegenen Nutzenpotenzial, da eine zunehmende Anzahl miteinander verbundener Gegenst{\"a}nde und der Austausch gr{\"o}ßerer Datenmengen realisierbar sind. Damit sind aus wirtschaftlicher Sicht neue, innovative Anwendungsf{\"a}lle des IoT m{\"o}glich, die auch bereits in der Praxis diskutiert werden. In diesem Beitrag wird anhand eines konkreten Anwendungsfalls untersucht, welche neuen Gesch{\"a}fts- bzw. Partnermodelle durch die gemeinsame Nutzung von NB-IoT-Daten und Big Data-Technologien entstehen und welcher qualitative Mehrwert f{\"u}r die an einem Anwendungsfall beteiligten Stakeholder geschaffen wird. Dazu wird - einem konstruktionsorientierten Forschungsansatz folgend - ein Bewertungsrahmen zur qualitativen Wertsch{\"o}pfungsanalyse von NB-IoT entwickelt, der u.a. auf der Schablone nach Cockburn und dem Business Model Canvas basiert. Anhand dieses Bewertungsrahmens wird ein Anwendungsfall untersucht, der in anonymisierter Form an konkrete Praxisprojekte angelehnt ist. Konkret wird ein Anwendungsfall betrachtet, der einen Fahrradverleih 2.0 basierend auf dem Einsatz von NB-IoT vorschl{\"a}gt. Aus den Untersuchungsergebnissen gehen beispielsweise Erkenntnisse hervor, wie Gesch{\"a}ftsmodelle auf},
  language  = {de}
}
@inproceedings{HellmannsHartungDilgeretal.2009,
  author    = {Hellmanns, Mark and Hartung, I. and Dilger, Klaus and B{\"o}hm, Stefan},
  title     = {Quality assurance of manual guided joining and welding devices},
  series = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore},
  booktitle = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore},
  publisher = {International Institute of Welding},
  address   = {Roissy},
  isbn      = {9789810832605},
  pages     = {219 -- 222},
  year      = {2009},
  language  = {en}
}
@inproceedings{LoschButenweg1999,
  author    = {Losch, S. and Butenweg, Christoph},
  title     = {Qualit{\"a}tsgesteuerte Bemessung von Stahlbetontragwerken mit der FE-Methode},
  series = {11. Forum Bauinformatik Darmstadt '99 : [Beitr{\"a}ge der Forumsteilnehmer, die im Rahmen des 11. Forums Bauinformatik vom 22. bis 24. September 1999 in Darmstadt ihre Forschung pr{\"a}sentiert ...] / Tobias Kuhn ... (Hrsg.) (Fortschritt-Berichte VDI : Reihe 4 Bauingenieurwesen ; Nr. 156)},
  booktitle = {11. Forum Bauinformatik Darmstadt '99 : [Beitr{\"a}ge der Forumsteilnehmer, die im Rahmen des 11. Forums Bauinformatik vom 22. bis 24. September 1999 in Darmstadt ihre Forschung pr{\"a}sentiert ...] / Tobias Kuhn ... (Hrsg.) (Fortschritt-Berichte VDI : Reihe 4 Bauingenieurwesen ; Nr. 156)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {Forum Bauinformatik <11, 1999, Darmstadt>},
  isbn      = {3-18-315604-0},
  pages     = {208 -- 215},
  year      = {1999},
  language  = {de}
}
@inproceedings{IomdinaKiselevaKotliaretal.2020,
  author    = {Iomdina, Elena N. and Kiseleva, Anna A. and Kotliar, Konstantin and Luzhnov, Petr V.},
  title     = {Quantification of Choroidal Blood Flow Using the OCT-A System Based on Voxel Scan Processing},
  series = {Proceedings of the International Conference on Biomedical Innovations and Applications- BIA 2020},
  booktitle = {Proceedings of the International Conference on Biomedical Innovations and Applications- BIA 2020},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-7281-7073-2},
  doi       = {10.1109/BIA50171.2020.9244511},
  pages     = {41 -- 44},
  year      = {2020},
  abstract  = {The paper presents a method for the quantitative assessment of choroidal blood flow using an OCT-A system. The developed technique for processing of OCT-A scans is divided into two stages. At the first stage, the identification of the boundaries in the selected portion was performed. At the second stage, each pixel mark on the selected layer was represented as a volume unit, a voxel, which characterizes the region of moving blood. Three geometric shapes were considered to represent the voxel. On the example of one OCT-A scan, this work presents a quantitative assessment of the blood flow index. A possible modification of two-stage algorithm based on voxel scan processing is presented.},
  language  = {en}
}
@inproceedings{SchopenShabaniEschetal.2022,
  author    = {Schopen, Oliver and Shabani, Bahman and Esch, Thomas and Kemper, Hans and Shah, Neel},
  title     = {Quantitative evaluation of health management designs for fuel cell systems in transport vehicles},
  series = {2nd UNITED-SAIG International Conference Proceedings},
  booktitle = {2nd UNITED-SAIG International Conference Proceedings},
  editor    = {Rahim, S.A. and As'arry, A. and Zuhri, M.Y.M. and Harmin, M.Y. and Rezali, K.A.M. and Hairuddin, A.A.},
  pages     = {1 -- 3},
  year      = {2022},
  abstract  = {Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified.},
  language  = {en}
}
@inproceedings{DrummSchmittDoetal.2007,
  author    = {Drumm, Christian and Schmitt, Matthias and Do, Hong-Hai and Rahm, Erhard},
  title     = {Quickmig: automatic schema matching for data migration projects},
  series = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007},
  booktitle = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007},
  isbn      = {978-1-59593-803-9},
  doi       = {10.1145/1321440.1321458},
  pages     = {107 -- 116},
  year      = {2007},
  language  = {en}
}
@inproceedings{Dachwald2017,
  author    = {Dachwald, Bernd},
  title     = {Radiation pressure force model for an ideal laser-enhanced solar sail},
  series = {4th International Symposium on Solar Sailing},
  booktitle = {4th International Symposium on Solar Sailing},
  pages     = {1 -- 5},
  year      = {2017},
  abstract  = {The concept of a laser-enhanced solar sail is introduced and the radiation pressure force model for an ideal laser-enhanced solar sail is derived. A laser-enhanced solar sail is a "traditional" solar sail that is, however, not solely propelled by solar radiation, but additionally by a laser beam that illuminates the sail. The additional laser radiation pressure increases the sail's propulsive force and can give, depending on the location of the laser source, more control authority over the direction of the solar sail's propulsive force vector. This way, laser-enhanced solar sails may augment already existing solar sail mission concepts and make novel mission concepts feasible.},
  language  = {en}
}
@inproceedings{Pfaff2018,
  author    = {Pfaff, Raphael},
  title     = {Railway Challenge 2018 - Ein Wettbewerb f{\"u}r Parkbahn-Lokomotiven},
  series = {Deine Bahn},
  booktitle = {Deine Bahn},
  issn      = {0948-7263},
  pages     = {22 -- 24},
  year      = {2018},
  language  = {de}
}
@inproceedings{ChavezBermudezCruzCastanonRuchayetal.2022,
  author    = {Chavez Bermudez, Victor Francisco and Cruz Castanon, Victor Fernando and Ruchay, Marco and Wollert, J{\"o}rg},
  title     = {Rapid prototyping framework for automation applications based on IO-Link},
  series = {Tagungsband AALE 2022: Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkr{\"a}ftemangel},
  booktitle = {Tagungsband AALE 2022: Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkr{\"a}ftemangel},
  editor    = {Leipzig, Hochschule f{\"u}r Technik, Wirtschaft und Kultur},
  address   = {Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.28},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The development of protype applications with sensors and actuators in the automation industry requires tools that are independent of manufacturer, and are flexible enough to be modified or extended for any specific requirements. Currently, developing prototypes with industrial sensors and actuators is not straightforward. First of all, the exchange of information depends on the industrial protocol that these devices have. Second, a specific configuration and installation is done based on the hardware that is used, such as automation controllers or industrial gateways. This means that the development for a specific industrial protocol, highly depends on the hardware and the software that vendors provide. In this work we propose a rapid-prototyping framework based on Arduino to solve this problem. For this project we have focused to work with the IO-Link protocol. The framework consists of an Arduino shield that acts as the physical layer, and a software that implements the IO-Link Master protocol. The main advantage of such framework is that an application with industrial devices can be rapid-prototyped with ease as its vendor independent, open-source and can be ported easily to other Arduino compatible boards. In comparison, a typical approach requires proprietary hardware, is not easy to port to another system and is closed-source.},
  language  = {en}
}
@inproceedings{EngelsSchnabel2012,
  author    = {Engels, Elmar and Schnabel, Holger},
  title     = {Rapid-control-prototyping of industrial drives for the sercos automation bus},
  series = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  booktitle = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  isbn      = {978-1-4673-4771-6},
  pages     = {177 -- 181},
  year      = {2012},
  abstract  = {This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.},
  language  = {en}
}
@inproceedings{PfaffMelcherFranzen2018,
  author    = {Pfaff, Raphael and Melcher, Karin and Franzen, Julian},
  title     = {Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems},
  series = {Proceedings of the European Conference of the PHM Society},
  volume    = {4},
  booktitle = {Proceedings of the European Conference of the PHM Society},
  number    = {1},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{KuperjansSeitzWilhelm1998,
  author    = {Kuperjans, Isabel and Seitz, C.-W. and Wilhelm, H.-G.},
  title     = {Realisierung einer Fernw{\"a}rmeversorgung mit Kraft-W{\"a}rme-Kopplung f{\"u}r den Wohnwertpark Br{\"u}hl},
  series = {Energiemanagement in Kommunen und {\"o}ffentlichen Einrichtungen : Tagung Stuttgart, 16. und 17. September 1998. - (VDI-Berichte ; 1424)},
  booktitle = {Energiemanagement in Kommunen und {\"o}ffentlichen Einrichtungen : Tagung Stuttgart, 16. und 17. September 1998. - (VDI-Berichte ; 1424)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Gesellschaft Energietechnik},
  issn      = {3-18-091424-6},
  pages     = {129 -- 138},
  year      = {1998},
  language  = {de}
}
@inproceedings{RitschelStenzelCzarneckietal.2021,
  author    = {Ritschel, Konstantin and Stenzel, Adina and Czarnecki, Christian and Hong, Chin-Gi},
  title     = {Realizing robotic process automation potentials: an architectural perspective on a real-life implementation case},
  series = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability},
  booktitle = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability},
  editor    = {Gesellschaft f{\"u}r Informatik e.V. (GI),},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885797081},
  issn      = {1617-5468},
  doi       = {10.18420/informatik2021-108},
  pages     = {1303 -- 1311},
  year      = {2021},
  abstract  = {The initial idea of Robotic Process Automation (RPA) is the automation of business processes through a simple emulation of user input and output by software robots. Hence, it can be assumed that no changes of the used software systems and existing Enterprise Architecture (EA) is required. In this short, practical paper we discuss this assumption based on a real-life implementation project. We show that a successful RPA implementation might require architectural work during analysis, implementation, and migration. As practical paper we focus on exemplary lessons-learned and new questions related to RPA and EA.},
  language  = {en}
}
@inproceedings{EppleBrandesGligorevicetal.2009,
  author    = {Epple, U. and Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael},
  title     = {Receiver optimization for L-DACS1},
  series = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.},
  booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-4078-8},
  pages     = {4B1-1 -- 4B1-12},
  year      = {2009},
  language  = {en}
}
@inproceedings{KrollLudwigs2016,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Rechtswahl und Gerichtsstandsvereinbarungen},
  series = {Die neue Europ{\"a}ische Erbrechtsverordnung},
  booktitle = {Die neue Europ{\"a}ische Erbrechtsverordnung},
  editor    = {Lipp, Volker and M{\"u}nch, Joachim},
  publisher = {Deutscher Notarverlag},
  address   = {Bonn},
  isbn      = {978-3-95646-062-3},
  pages     = {65 -- 97},
  year      = {2016},
  language  = {de}
}
@inproceedings{Kurz2006,
  author    = {Kurz, Melanie},
  title     = {Recognition of shape in virtual visualizations},
  series = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  booktitle = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  publisher = {Techn. Univ.},
  address   = {Darmstadt},
  isbn      = {978-3-00-020161-5},
  pages     = {203 -- 209},
  year      = {2006},
  language  = {en}
}
@inproceedings{ZingsheimGrimmerOrtneretal.2019,
  author    = {Zingsheim, Jonas and Grimmer, Timo and Ortner, Marion and Schmaderer, Christoph and Hauser, Christine and Kotliar, Konstantin},
  title     = {Recognition of subjects with mild cognitive impairment (MCI) by the use of retinal arterial vessels.},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {36 -- 37},
  year      = {2019},
  language  = {en}
}
@inproceedings{EndressBragard2017,
  author    = {Endress, Tim and Bragard, Michael},
  title     = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench},
  series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-5386-3846-0},
  doi       = {10.1109/RTUCON.2017.8124775},
  pages     = {5 Seiten},
  year      = {2017},
  abstract  = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.},
  language  = {en}
}
@inproceedings{HueningWacheMagiera2021,
  author    = {H{\"u}ning, Felix and Wache, Franz-Josef and Magiera, David},
  title     = {Redundant bus systems using dual-mode radio},
  series = {Proceedings of Sixth International Congress on Information and Communication Technology},
  booktitle = {Proceedings of Sixth International Congress on Information and Communication Technology},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-16-2379-0},
  doi       = {10.1007/978-981-16-2380-6_73},
  pages     = {835 -- 842},
  year      = {2021},
  abstract  = {Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.},
  language  = {en}
}
@inproceedings{PauksztatKuperjansdeHesselle2006,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and de Hesselle, M.},
  title     = {Referenzformeln f{\"u}r Energiebedarf und CO2-Emissionen in der Glasindustrie},
  series = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)},
  booktitle = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)},
  edition   = {Nichtred. Ms.-Dr.},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091951-5},
  pages     = {179 -- 190},
  year      = {2006},
  language  = {de}
}
@inproceedings{MilkovaButenwegDumovaJovanoska2021,
  author    = {Milkova, Kristina and Butenweg, Christoph and Dumova-Jovanoska, Elena},
  title     = {Region-sensitive comprehensive procedure for determination of seismic fragility curves},
  series = {1st Croatian Conference on Earthquake Engineering 1CroCEE},
  booktitle = {1st Croatian Conference on Earthquake Engineering 1CroCEE},
  publisher = {University of Zagreb},
  address   = {Zagreb},
  doi       = {10.5592/CO/1CroCEE.2021.158},
  pages     = {121 -- 128},
  year      = {2021},
  abstract  = {Seismic vulnerability estimation of existing structures is unquestionably interesting topic of high priority, particularly after earthquake events. Having in mind the vast number of old masonry buildings in North Macedonia serving as public institutions, it is evident that the structural assessment of these buildings is an issue of great importance. In this paper, a comprehensive methodology for the development of seismic fragility curves of existing masonry buildings is presented. A scenario - based method that incorporates the knowledge of the tectonic style of the considered region, the active fault characterization, the earth crust model and the historical seismicity (determined via the Neo Deterministic approach) is used for calculation of the necessary response spectra. The capacity of the investigated masonry buildings has been determined by using nonlinear static analysis. MINEA software (SDA Engineering) is used for verification of the structural safety of the structures Performance point, obtained from the intersection of the capacity of the building and the spectra used, is selected as a response parameter. The thresholds of the spectral displacement are obtained by splitting the capacity curve into five parts, utilizing empirical formulas which are represented as a function of yield displacement and ultimate displacement. As a result, four levels of damage limit states are determined. A maximum likelihood estimation procedure for the process of fragility curves determination is noted as a final step in the proposed procedure. As a result, region specific series of vulnerability curves for structures are defined.},
  language  = {en}
}
@inproceedings{StollenwerkKuvarakulKuperjans2013,
  author    = {Stollenwerk, Dominik and Kuvarakul, T. and Kuperjans, Isabel},
  title     = {Renewable energy supply for power dominated, energy intense production processes - a systematic conversion approach for the anodizing process},
  series = {IOP conference series: Earth and environmental science (EES)},
  volume    = {Vol. 16},
  booktitle = {IOP conference series: Earth and environmental science (EES)},
  number    = {H. 1},
  issn      = {1755-1315},
  pages     = {012142/1 -- 012142/4},
  year      = {2013},
  language  = {en}
}
@inproceedings{HartungDilgerHellmannsetal.2009,
  author    = {Hartung, I. and Dilger, Klaus and Hellmanns, Mark and B{\"o}hme, Stefan},
  title     = {Repair of non-weldable steel structures to extend the life cycle},
  series = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  booktitle = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  organization    = {International Institute of Welding},
  isbn      = {978-981-08-3259-9},
  pages     = {569 -- 574},
  year      = {2009},
  language  = {en}
}
@inproceedings{ZaehlBiewendtWolfetal.2022,
  author    = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin R. and Eggert, Mathias},
  title     = {Requirements for competence developing games in the environment of SE Competence Development},
  series = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  booktitle = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  publisher = {GITO},
  address   = {Berlin},
  isbn      = {978-3-95545-409-8},
  doi       = {10.30844/AKWI_2022_05},
  pages     = {73 -- 88},
  year      = {2022},
  abstract  = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.},
  language  = {en}
}
@inproceedings{LorenzAltherrPelz2020,
  author    = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.},
  title     = {Resilience enhancement of critical infrastructure - graph-theoretical resilience analysis of the water distribution system in the German city of Darmstadt},
  series = {14th WCEAM Proceedings},
  booktitle = {14th WCEAM Proceedings},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-64228-0},
  doi       = {10.1007/978-3-030-64228-0_13},
  pages     = {137 -- 149},
  year      = {2020},
  abstract  = {Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of water distribution systems (WDS), i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, graph-theoretical metrics have been proposed. In this study, a promising approach is first physically derived analytically and then applied to assess the resilience of the WDS for a district in a major German City. The topology based resilience index computed for every consumer node takes into consideration the resistance of the best supply path as well as alternative supply paths. This resistance of a supply path is derived to be the dimensionless pressure loss in the pipes making up the path. The conducted analysis of a present WDS provides insight into the process of actively influencing the resilience of WDS locally and globally by adding pipes. The study shows that especially pipes added close to the reservoirs and main branching points in the WDS result in a high resilience enhancement of the overall WDS.},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive exploration and asteroid characterization through integrated solar sail and lander development using small spacecraft technologies},
  series = {IAA Planetary Defense Conference},
  booktitle = {IAA Planetary Defense Conference},
  year      = {2019},
  abstract  = {In parallel to the evolution of the Planetary Defense Conference, the exploration of small solar system bodies has advanced from fast fly-bys on the sidelines of missions to the planets to the implementation of dedicated sample-return and in-situ analysis missions. Spacecraft of all sizes have landed, touch-and-go sampled, been gently beached, or impacted at hypervelocity on asteroid and comet surfaces. More have flown by close enough to image their surfaces in detail or sample their immediate environment, often as part of an extended or re-purposed mission. And finally, full-scale planetary defense experiment missions are in the making. Highly efficient low-thrust propulsion is increasingly applied beyond commercial use also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another development in the same years is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities. The on-going NASA OSIRIS-REx and JAXA HAYABUSA2 missions exemplify the trend as well as the upcoming NEA SCOUT mission or the landers MINERVA-II and MASCOT recently deployed on Ryugu. We outline likely as well as possible and efficient routes of continuation of all these developments towards a propellant-less and highly efficient class of spacecraft for small solar system body exploration: small spacecraft solar sails designed for carefree handling and equipped with carried landers and application modules, for all asteroid user communities -planetary science, planetary defence, and in-situ resource utilization. This projection builds on the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)² solar sail at DLR Cologne and in the 20 years since. It draws on the background of extensive trajectory optimization studies, the qualified technology of the DLR GOSSAMER-1 deployment demonstrator, and the MASCOT asteroid lander. These enable 'now-term' as well as near-term hardware solutions, and thus responsive fast-paced development. Mission types directly applicable to planetary defense include: single and Multiple NEA Rendezvous ((M)NR) for mitigation precursor, target monitoring and deflection follow-up tasks; sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation; and deployable membrane based methods to modify the asteroid's properties or interact with it. The DLR-ESTEC GOSSAMER Roadmap initiated studies of missions uniquely feasible with solar sails such as Displaced L1 (DL1) space weather advance warning and monitoring and Solar Polar Orbiter (SPO) delivery which demonstrate the capability of near-term solar sails to achieve NEA rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. For those mission types using separable payloads, such as SPO, (M)NR and RKI, design concepts can be derived from the separable Boom Sail Deployment Units characteristic of DLR GOSSAMER solar sail technology, nanolanders like MASCOT, or microlanders like the JAXA-DLR Jupiter Trojan Asteroid Lander for the OKEANOS mission which can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. These are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive integrated small spacecraft solar sail and payload design concepts and missions},
  series = {Conference: 5th International Symposium on Solar Sailing (ISSS 2019)},
  booktitle = {Conference: 5th International Symposium on Solar Sailing (ISSS 2019)},
  year      = {2019},
  abstract  = {Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from Earth's deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. This work focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods will then be compared in terms of maximum economic return, sets of attainable target asteroids, and mission flexibility. This paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.},
  language  = {en}
}
@inproceedings{MiyamotoSutoWerneretal.2017,
  author    = {Miyamoto, Ko-ichiro and Suto, Takeyuki and Werner, Frederik and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Restraining the Diffusion of Photocarriers to Improve the Spatial Resolution of the Chemical Imaging Sensor},
  series = {MDPI Proceedings},
  volume    = {1},
  booktitle = {MDPI Proceedings},
  number    = {4},
  doi       = {10.3390/proceedings1040477},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{RendonDieckmannWeidleetal.2018,
  author    = {Rendon, Carlos and Dieckmann, Simon and Weidle, Mathias and Dersch, J{\"u}rgen and Teixeira Boura, Cristiano Jos{\´e} and Polklas, Thomas and Kuschel, Marcus and Herrmann, Ulf},
  title     = {Retrofitting of existing parabolic trough collector power plants with molten salt tower systems},
  series = {AIP Conference Proceedings},
  volume    = {2033},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  doi       = {10.1063/1.5067030},
  pages     = {030014-1 -- 030014-8},
  year      = {2018},
  language  = {en}
}
@inproceedings{BitzStreckertHansenetal.2000,
  author    = {Bitz, Andreas and Streckert, J. and Hansen, V.W. and Buschmann, J.},
  title     = {RF exposure of non restrained animals in an overmoded radial waveguide},
  series = {22nd BEMS Annual Meeting, Munich, Germany, 2000},
  booktitle = {22nd BEMS Annual Meeting, Munich, Germany, 2000},
  publisher = {Bioelectromagnetics Society},
  address   = {Frederick, MD},
  pages     = {63},
  year      = {2000},
  language  = {en}
}
@inproceedings{AllalBannisterBuismanetal.2022,
  author    = {Allal, D. and Bannister, R. and Buisman, K. and Capriglione, D. and Di Capua, G. and Garc{\´i}a-Patr{\´o}n, M. and Gatzweiler, Thomas and Gellersen, F. and Harzheim, Thomas and Heuermann, Holger and Hoffmann, J. and Izbrodin, A. and Kuhlmann, K. and Lahbacha, K. and Maffucci, A. and Miele, G. and Mubarak, F. and Salter, M. and Pham, T.D. and Sayegh, A. and Singh, D. and Stein, F. and Zeier, M.},
  title     = {RF measurements for future communication applications: an overview},
  series = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)},
  booktitle = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)},
  publisher = {IEEE},
  isbn      = {978-1-6654-8362-9},
  issn      = {2639-5061},
  doi       = {10.1109/MN55117.2022.9887740},
  pages     = {1 -- 6},
  year      = {2022},
  abstract  = {In this paper research activities developed within the FutureCom project are presented. The project, funded by the European Metrology Programme for Innovation and Research (EMPIR), aims at evaluating and characterizing: (i) active devices, (ii) signal- and power integrity of field programmable gate array (FPGA) circuits, (iii) operational performance of electronic circuits in real-world and harsh environments (e.g. below and above ambient temperatures and at different levels of humidity), (iv) passive inter-modulation (PIM) in communication systems considering different values of temperature and humidity corresponding to the typical operating conditions that we can experience in real-world scenarios. An overview of the FutureCom project is provided here, then the research activities are described.},
  language  = {en}
}
@inproceedings{BitzKobusScheenenetal.2013,
  author    = {Bitz, Andreas and Kobus, Thiele and Scheenen, Tom W. J. and Ladd, Mark E.},
  title     = {RF Safety of the Combination of a 31P Tx/Rx Endorectal Coil \& a 1H Tx/Rx Body Array for 31P MRSI of the Prostate at 7T (311.)},
  series = {20th Annual ISMRM scientific meeting and exhibition 2012 : Melbourne, Australia, 5 - 11 May 2012},
  booktitle = {20th Annual ISMRM scientific meeting and exhibition 2012 : Melbourne, Australia, 5 - 11 May 2012},
  number    = {Volume 1},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-62276-943-8},
  issn      = {1545-4428},
  pages     = {311},
  year      = {2013},
  language  = {en}
}
@inproceedings{KirchnerHenkelNaetheretal.2008,
  author    = {Kirchner, Patrick and Henkel, H. and N{\"a}ther, Niko and Spelthahn, H. and Schneider, A. and Berger, J. and Kolstad, J. and Friedrich, P. and Sch{\"o}ning, Michael Josef},
  title     = {RFID-basiertes Sensorsystem zur Realisierung intelligenter Verpackungen f{\"u}r die Nahrungsmittelindustrie},
  series = {KMU - innovativ: IKT 2008. CD-ROM : BMBF-Statustagung KMU - innovativ: IKT, Darmstadt, 17. - 18. Nov. 2008},
  booktitle = {KMU - innovativ: IKT 2008. CD-ROM : BMBF-Statustagung KMU - innovativ: IKT, Darmstadt, 17. - 18. Nov. 2008},
  number    = {CD-ROM-Ausg.},
  publisher = {BMBF},
  address   = {Berlin},
  pages     = {9 S.},
  year      = {2008},
  language  = {de}
}
@inproceedings{NabeBorchert1999,
  author    = {Nabe, C. and Borchert, J{\"o}rg},
  title     = {Risikomanagement von EVU in liberalisierten Stromm{\"a}rkten},
  series = {Liberalisierung des Energiemarktes : Vortragsmanuskripte des 5. Ferienkurses "Energieforschung" vom 27. September - 1. Oktober 1999 im Congrescentrum Rolduc und im Forschungszentrum J{\"u}lich},
  booktitle = {Liberalisierung des Energiemarktes : Vortragsmanuskripte des 5. Ferienkurses "Energieforschung" vom 27. September - 1. Oktober 1999 im Congrescentrum Rolduc und im Forschungszentrum J{\"u}lich},
  editor    = {Hake, J{\"u}rgen-Friedrich},
  publisher = {Forschungszentrum},
  address   = {J{\"u}lich},
  isbn      = {3-89336-248-7},
  pages     = {203 -- 216},
  year      = {1999},
  language  = {de}
}
@inproceedings{KernBraun2014,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Risk management according to IEC 62305-2 edition 2: 2010-12 assessment of structures with a risk of explosion},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1237 -- 1242},
  year      = {2014},
  abstract  = {Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic "Structures with a risk of explosion" in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.},
  language  = {en}
}
@inproceedings{Starke2009,
  author    = {Starke, G{\"u}nther},
  title     = {Robotertechnik f{\"u}r individuelle Automatisierungsl{\"o}sungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen \& Schneiden 2009" - Stand und Entwicklungstendenzen},
  series = {Schweissen und Schneiden},
  booktitle = {Schweissen und Schneiden},
  publisher = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V.},
  issn      = {0036-7184 (Print)},
  pages     = {N 13 (nach Seite 716)},
  year      = {2009},
  language  = {de}
}
@inproceedings{ElDeibChudobaButenwegetal.2002,
  author    = {El-Deib, Khaled and Chudoba, Rostislav and Butenweg, Christoph and Meskouris, Konstantin and K{\"o}nke, Carsten and Bettzieche, Volker},
  title     = {Safety assessment of rockfill and masonry dams},
  series = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1},
  booktitle = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1},
  publisher = {Balkema},
  address   = {Lisse},
  organization    = {International Conference on Structural Dynamics <5, 2002, M{\"u}nchen>},
  isbn      = {90-5809-510-X},
  pages     = {237 -- 242},
  year      = {2002},
  language  = {en}
}
@inproceedings{BragardRongeDeDoncker2011,
  author    = {Bragard, Michael and Ronge, C. and De Doncker, R. W.},
  title     = {Sandwich design of high-power thyristor based devices with integrated MOSFET structure},
  series = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom},
  booktitle = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-167-0 (Print)},
  year      = {2011},
  language  = {en}
}
@inproceedings{GligorevicJostWalter2009,
  author    = {Gligorevic, Snjezana and Jost, T. and Walter, M.},
  title     = {Scatterer based airport surface channel model},
  series = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.},
  booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-4078-8},
  pages     = {4C2-1 -- 4C2-10},
  year      = {2009},
  language  = {en}
}
@inproceedings{AlexopoulosKluczkaVaessenetal.2012,
  author    = {Alexopoulos, Spiros and Kluczka, Sven and Vaeßen, Christiane and Roeb, M. and Neises, M.},
  title     = {Scenario development for efficient methanol production using CO2 and solar energy},
  series = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  booktitle = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  address   = {Rijeka},
  pages     = {ID 99},
  year      = {2012},
  language  = {en}
}