@article{ScheerWolf2014,
  author    = {Scheer, Nico and Wolf, C. Roland},
  title     = {Genetically humanized mouse models of drug metabolizing enzymes and transporters and their applications},
  series = {Xenobiotica},
  volume    = {44},
  journal   = {Xenobiotica},
  number    = {2},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1366-5928},
  doi       = {10.3109/00498254.2013.815831},
  pages     = {96 -- 108},
  year      = {2014},
  abstract  = {1. Drug metabolizing enzymes and transporters play important roles in the absorption, metabolism, tissue distribution and excretion of various compounds and their metabolites and thus can significantly affect their efficacy and safety. Furthermore, they can be involved in drug-drug interactions which can result in adverse responses, life-threatening toxicity or impaired efficacy. Significant species differences in the interaction of compounds with drug metabolizing enzymes and transporters have been described. 2. In order to overcome the limitation of animal models in accurately predicting human responses, a large variety of mouse models humanized for drug metabolizing enzymes and to a lesser extent drug transporters have been created. 3. This review summarizes the literature describing these mouse models and their key applications in studying the role of drug metabolizing enzymes and transporters in drug bioavailability, tissue distribution, clearance and drug-drug interactions as well as in human metabolite testing and risk assessment. 4. Though such humanized mouse models have certain limitations, there is great potential for their use in basic research and for testing and development of new medicines. These limitations and future potentials will be discussed.},
  language  = {en}
}
@article{ScheerWolf2013,
  author    = {Scheer, Nico and Wolf, C. Roland},
  title     = {Xenobiotic receptor humanized mice and their utility},
  series = {Drug Metabolism Reviews},
  journal   = {Drug Metabolism Reviews},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1097-9883},
  doi       = {10.3109/03602532.2012.738687},
  pages     = {110 -- 121},
  year      = {2013},
  language  = {en}
}
@article{HendersonScheerWolf2009,
  author    = {Henderson, Colin J. and Scheer, Nico and Wolf, C. Roland},
  title     = {Advances in the generation of mouse models to elucidate the pathways of drug metabolism in rodents and man},
  series = {Expert Review of Clinical Pharmacology},
  volume    = {2},
  journal   = {Expert Review of Clinical Pharmacology},
  number    = {2},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1751-2441},
  doi       = {10.1586/17512433.2.2.105},
  pages     = {105 -- 109},
  year      = {2009},
  language  = {en}
}
@article{StanleyHorsburghRossetal.2009,
  author    = {Stanley, Lesley A. and Horsburgh, Brian C. and Ross, Jillian and Scheer, Nico and Wolf, C. Roland},
  title     = {Drug transporters: Gatekeepers controlling access of xenobiotics to the cellular interior},
  series = {Drug Metabolism Reviews},
  volume    = {41},
  journal   = {Drug Metabolism Reviews},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1097-9883},
  doi       = {10.1080/03602530802605040},
  pages     = {27 -- 65},
  year      = {2009},
  language  = {en}
}
@article{StanleyHorsburghRossetal.2006,
  author    = {Stanley, Lesley A. and Horsburgh, Brian C. and Ross, Jillian and Scheer, Nico and Wolf, C. Roland},
  title     = {Nuclear Receptors which play a pivotal role in drug disposition and chemical toxicity},
  series = {Drug Metabolism Reviews},
  volume    = {38},
  journal   = {Drug Metabolism Reviews},
  number    = {3},
  issn      = {1097-9883},
  doi       = {10.1080/03602530600786232},
  pages     = {515 -- 597},
  year      = {2006},
  language  = {en}
}
@incollection{SamuelssonScheerWilsonetal.2017,
  author    = {Samuelsson, K. and Scheer, Nico and Wilson, I. and Wolf, C.R. and Henderson, C.J.},
  title     = {Genetically Humanized Animal Models},
  series = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  booktitle = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  editor    = {Chackalamannil, Samuel},
  publisher = {Elsevier},
  address   = {Saint Louis},
  isbn      = {978-0-12-803201-5},
  doi       = {10.1016/B978-0-12-409547-2.12376-5},
  pages     = {130 -- 149},
  year      = {2017},
  abstract  = {Genetically humanized mice for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging as promising in vivo models for improved prediction of the pharmacokinetic, drug-drug interaction, and safety characteristics of compounds in humans. This is an overview on the genetically humanized and chimeric liver-humanized mouse models, which are illustrated with examples of their utility in drug metabolism and toxicity studies. The models are compared to give guidance for selection of the most appropriate model by highlighting advantages and disadvantages to be carefully considered when used for studies in drug discovery and development.},
  language  = {en}
}
@incollection{ScheerChuSalphatietal.2016,
  author    = {Scheer, Nico and Chu, Xiaoyan and Salphati, Laurent and Zamek-Gliszczynski, Maciej J.},
  title     = {Knockout and humanized animal models to study membrane transporters in drug development},
  series = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  booktitle = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  editor    = {Nicholls, Glynis},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  isbn      = {978-1-78262-379-3},
  doi       = {10.1039/9781782623793-00298},
  pages     = {298 -- 332},
  year      = {2016},
  language  = {en}
}
@article{EngelGemuendeHoltmannetal.2019,
  author    = {Engel, Mareike and Gem{\"u}nde, Andre and Holtmann, Dirk and M{\"u}ller-Renno, Christine and Ziegler, Christiane and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Clostridium acetobutylicum's connecting world: cell appendage formation in bioelectrochemical systems},
  series = {ChemElectroChem},
  volume    = {7},
  journal   = {ChemElectroChem},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2196-0216},
  doi       = {10.1002/celc.201901656},
  pages     = {414 -- 420},
  year      = {2019},
  abstract  = {Bacterial cell appendix formation supports cell-cell interaction, cell adhesion and cell movement. Additionally, in bioelectrochemical systems (BES), cell appendages have been shown to participate in extracellular electron transfer. In this work, the cell appendix formation of Clostridium acetobutylicum in biofilms of a BES are imaged and compared with conventional biofilms. Under all observed conditions, the cells possess filamentous appendages with a higher number and density in the BES. Differences in the amount of extracellular polymeric substance in the biofilms of the electrodes lead to the conclusion that the cathode can be used as electron donor and the anode as electron acceptor by C. acetobutylicum. When using conductive atomic force microscopy, a current response of about 15 nA is found for the cell appendages from the BES. This is the first report of conductivity for clostridial cell appendices and represents the basis for further studies on their role for biofilm formation and electron transfer.},
  language  = {en}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Hruschka, Steffen M. and Ulber, Roland},
  title     = {A novel integrated downstream processing approach to recover sinapic acid, phytic acid and proteins from rapeseed meal},
  series = {Journal of Chemical Technology and Biotechnology},
  volume    = {90},
  journal   = {Journal of Chemical Technology and Biotechnology},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/jctb.4664},
  pages     = {1999 -- 2006},
  year      = {2015},
  abstract  = {BACKGROUND Currently, several techniques exist for the downstream processing of protein, phytic acid and sinapic acid from rapeseed and rapeseed meal, but no technique has been developed to separate all of the components in one process. In this work, two new downstream processing strategies focusing on recovering sinapic acid, phytic acid and protein from rapeseed meal were established. RESULTS The sinapic acid content was enhanced by a factor of 4.5 with one method and 5.1 with the other. The isolation of sinapic acid was accomplished using a zeolite-based adsorbent with high adsorptive and optimal desorption characteristics. Phytic acid was isolated using the anion-exchange resin Purolite A200®. In addition, the processes resulted in two separated protein fractions. The ratios of globulin and albumin ratio to the total protein were 59.2\% and 40.1\%, respectively. The steps were then combined in two different ways: (a) a 'sequential process' using the zeolite and A200 in batch processes; and (b) a 'parallel process' using only A200 in a chromatographic system to separate all of the compounds. CONCLUSIONS It can be concluded that isolation of all three components was possible in both processes. These could enhance the added value of current processes using rapeseed meal as a protein source. © 2015 Society of Chemical Industry},
  language  = {en}
}
@article{SchumannRoginSchneideretal.2015,
  author    = {Schumann, Christiane and Rogin, Sabine and Schneider, Horst and Tippk{\"o}tter, Nils and Oster, J{\"u}rgen and Kampeis, Percy},
  title     = {Simultane Atline-Quantifizierung von Magnetpartikeln und Mikroorganismen bei einer HGMS-Filtration},
  series = {Chemie Ingenieur Technik},
  volume    = {87},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  doi       = {10.1002/cite.201300158},
  pages     = {137 -- 149},
  year      = {2015},
  abstract  = {Es wird eine neue Atline-Messmethode vorgestellt, mit der w{\"a}hrend einer Hochgradienten-Magnetseparation (HGMS)-Filtration eine simultane Quantifizierung von Magnetpartikeln und Mikroorganismen im Filtrat vorgenommen werden kann. Dabei gelingt die Quantifizierung signifikant besser als mit bisher verwendeten Messmethoden. Mit dieser Methode ist es m{\"o}glich, die Trennleistung einer HGMS-Filtration zu bestimmen und einen Filterdurchbruch durch Konzentrationsanstiege im Bereich einiger µg L-1 von Magnetpartikeln im Filtrat fr{\"u}hzeitig zu detektieren, ohne dass nennenswerte Partikelmengen verloren gehen.},
  language  = {de}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Aufarbeitung von Polyphenolen aus Weizen mittels Zeolithen am Beispiel der Ferulas{\"a}ure},
  series = {Chemie IngenieurTechnik},
  volume    = {87},
  journal   = {Chemie IngenieurTechnik},
  number    = {1-2},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201400031},
  pages     = {128 -- 136},
  year      = {2015},
  abstract  = {Aufarbeitung von Polyphenolen aus Weizenmittels Zeolithen am Beispiel der Ferulasa¨ ureAlexander Thiel1, Kai Muffler1, Nils Tippko¨ tter1, Kirstin Suck2, Ulrich Sohling2, Friedrich Ruf3und Roland Ulber1,*DOI: 10.1002/cite.201400031Bei der Ferulasa¨ure handelt es sich um einen Wertstoff, der aus Weizen gewonnen und in der Lebensmittel- und Pharma-industrie eingesetzt werden kann. Der Einsatz von Weizen als nachwachsende Rohstoffquelle ist allerdings nur dann wirt-schaftlich durchfu¨hrbar, wenn eine Prozessintegration in die bestehenden industriellen Verfahren gewa¨hrleistet oder einedirekte Konkurrenz zur Mehl- und Sta¨rkeindustrie vermieden werden kann. In diesem Artikel wird ein Verfahren aufge-zeigt, welches hohe Ausbeuten ermo¨glicht und eine Konkurrenz zu bestehenden Verwertungspfaden vermeidet.},
  language  = {de}
}
@article{PasteurTippkoetterKampeisetal.2014,
  author    = {Pasteur, Aline and Tippk{\"o}tter, Nils and Kampeis, Percy and Ulber, Roland},
  title     = {Optimization of high gradient magnetic separation filter units for the purification of fermentation products},
  series = {IEEE TRANSACTIONS ON MAGNETICS},
  volume    = {50},
  journal   = {IEEE TRANSACTIONS ON MAGNETICS},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9464},
  doi       = {10.1109/TMAG.2014.2325535},
  pages     = {Artikel 5000607},
  year      = {2014},
  abstract  = {High gradient magnetic separation (HGMS) has been established since the early 1970s. A more recent application of these systems is the use in bioprocesses. To integrate the HGMS in a fermentation process, it is necessary to optimize the separation matrix with regard to the magnetic separation characteristics and permeability of the non-magnetizable components of the fermentation broth. As part of the work presented here, a combined fluidic and magnetic force finite element model simulation was created using the software COMSOL Multiphysics and compared with separation experiments. Finally, as optimal lattice orientation of the separation matrix, a transversal rhombohedral arrangement was defined. The high suitability of the new filter matrix has been verified by separation experiments.},
  language  = {en}
}
@article{TippkoetterWollnySucketal.2014,
  author    = {Tippk{\"o}tter, Nils and Wollny, Steffen and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Recycling of spent oil bleaching earth as source of glycerol for the anaerobic production of acetone, butanol, and ethanol with Clostridium diolis and lipolytic Clostridium lundense},
  series = {Engineering in Life Sciences},
  volume    = {14},
  journal   = {Engineering in Life Sciences},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1618-2863},
  doi       = {10.1002/elsc.201300113},
  pages     = {425 -- 432},
  year      = {2014},
  abstract  = {A major part of edible oil is subjected to bleaching procedures, primarily with minerals applied as adsorbers. Their recycling is currently done either by regaining the oil via organic solvent extraction or by using the spent bleaching earth (SBE) as additive for animal feed, etc. As a new method, the reutilization of the by-product SBE for the microbiologic formation of acetone, butanol, and ethanol (ABE) is presented as proof-of-concept. The SBE was taken from a palm oil cleaning process. The recycling concept is based on the application of lipolytic clostridia strains. Due to considerably long fermentation times, co-fermentation with Candida rugosa and enzymatic hydrolyses of the bound oil with a subsequent clostridia fermentation are shown as alternative routes. Anaerobic fermentations under comparison of different clostridia strains were performed with glycerol media, enzymatically hydrolyzed palm oil and SBE. Solutes, side product compositions and productivities were quantified via HPLC. A successful production of ABE solutes from SBE has been done with a yield of 0.15 g butanol per gram of bound glycerol. Thus, the biotechnological recycling of the waste stream is possible in principle. Inhibition of the substrate suspension has been observed. A chromatographic ion-exchange of substrates increased the biomass concentration.},
  language  = {en}
}
@article{AlKaidyDuweHusteretal.2014,
  author    = {Al-Kaidy, Huschyar and Duwe, Anna and Huster, Manuel and Muffler, Kai and Schlegel, Christin and Sieker, Tim and Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Biotechnologie und Bioverfahrenstechnik - Vom ersten Ullmanns Artikel bis hin zu aktuellen Forschungsthemen},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {12},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201400083},
  pages     = {2215 -- 2225},
  year      = {2014},
  abstract  = {Biotechnologie und die mit ihr verbundenen technischen Prozesse pr{\"a}gen seit Jahrtausenden die Entwicklung der Menschheit. Ausgehend von empirischen Verfahren, insbesondere zur Herstellung von Lebensmitteln und t{\"a}glichen Gebrauchsg{\"u}tern, haben sich diese Disziplinen zu einem der innovativsten Zukunftsfelder entwickelt. Durch das immer detailliertere Verst{\"a}ndnis zellul{\"a}rer Vorg{\"a}nge k{\"o}nnen mittlerweile Produktionsst{\"a}mme gezielt optimiert werden. Im Zusammenspiel mit moderner Prozesstechnik k{\"o}nnen so eine Vielzahl von Bulk- und Feinchemikalien sowie Pharmazeutika effizient hergestellt werden. In diesem Artikel werden exemplarisch einige der aktuellen Trends vorgestellt.},
  language  = {de}
}
@article{WiesenTippkoetterMuffleretal.2014,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Nils and Ulber, Roland},
  title     = {Adsorptive Vorbehandlung von Rohglycerin f{\"u}r die 1,3-Propandiol Fermentation mit Clostridium diolis},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201300080},
  pages     = {129 -- 135},
  year      = {2014},
  abstract  = {Bei der Gewinnung von Fetts{\"a}uren aus Pflanzen{\"o}len, z. B. zur Herstellung von Biopolymeren, oder bei der Biodiesel- und Seifenproduktion, f{\"a}llt Glycerin als Nebenprodukt an. Bei der Biokonversion dieses Rohstoffes zu 1,3-Propandiol wird der Produktionsorganismus Clostridium diolis durch Verunreinigungen im Rohglycerin gehemmt. Als inhibierende Substanzen konnten freie Fetts{\"a}uren identifiziert werden. Mithilfe eines adsorptiven Aufarbeitungsverfahrens ist es gelungen, die Fetts{\"a}uren zu entfernen und die Konversionseffizienz zu 1,3-Propandiol zu erh{\"o}hen.},
  language  = {de}
}
@article{ThielTippkoetterSucketal.2013,
  author    = {Thiel, Alexander and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {New zeolite adsorbents for downstream processing of polyphenols from renewable resources},
  series = {Engineering in Life Sciences},
  volume    = {13},
  journal   = {Engineering in Life Sciences},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201200188},
  pages     = {239 -- 246},
  year      = {2013},
  abstract  = {Commercial materials with polyvinylpolypyrrolidone and polymeric amberlites (XAD7HP, XAD16) are commonly used for the adsorptive downstream processing of polyphenols from renewable resources. In this study, beta-zeolite-based adsorbent systems were examined, and their properties were compared to organic resins. Batch adsorption experiments were conducted with synthetic solutions of major polyphenols. Adsorption isotherms and desorption characteristics of individual adsorbent were determined based on these results. Maximum adsorption capacities were calculated using the Langmuir model. For example, the zeolites had capacities up to 203.2 mg/g for ferulic acid. To extend these results to a complex system, additional experiments were performed on rapeseed meal and wheat seed extracts as representative renewable resources. HPLC analysis showed that with 7.5\% w/v, which is regarded as the optimum amount of zeolites, zeolites A and B could bind 100\% of the major polyphenols as well as release polyphenols at high yields. Additionally, regeneration experiments were performed with isopropyl alcohol at 99°C to evaluate how zeolites regenerate under mild conditions. The results showed only a negligible loss of adsorption capacity and no loss of desorption capacity. In summary, it was concluded that beta-zeolites were promising adsorbents for developing new processes to isolate polyphenols from renewable resources.},
  language  = {en}
}
@article{TippkoetterAlKaidyWollnyetal.2013,
  author    = {Tippk{\"o}tter, Nils and Al-Kaidy, Huschyar and Wollny, Steffen and Ulber, Roland},
  title     = {Functionalized magnetizable particles for downstream processing in single-use systems},
  series = {Chemie Ingenieur Technik},
  volume    = {85},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2: Special Issue: Single-Use Technology},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201200130},
  pages     = {76 -- 86},
  year      = {2013},
  abstract  = {Biotechnological downstream processing is usually an elaborate procedure, requiring a multitude of unit operations to isolate the target component. Besides the disadvantageous space-time yield, the risks of cross-contaminations and product loss grow fast with the complexity of the isolation procedure. A significant reduction of unit operations can be achieved by application of magnetic particles, especially if these are functionalized with affinity ligands. As magnetic susceptible materials are highly uncommon in biotechnological processes, target binding and selective separation of such particles from fermentation or reactions broths can be done in a single step. Since the magnetizable particles can be produced from iron salts and low priced polymers, a single-use implementation of these systems is highly conceivable. In this article, the principles of magnetizable particles, their synthesis and functionalization are explained. Furthermore, applications in the area of reaction engineering, microfluidics and downstream processing are discussed focusing on established single-use technologies and development potential.},
  language  = {en}
}
@article{SiekerNeunerDimitrovaetal.2011,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Muffler, Kai and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Ethanol production from grass silage by simultaneous pretreatment, saccharification and fermentation: First steps in the process development},
  series = {Engineering in Life Sciences},
  volume    = {11},
  journal   = {Engineering in Life Sciences},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201000160},
  pages     = {436 -- 442},
  year      = {2011},
  abstract  = {Grass silage provides a great potential as renewable feedstock. Two fractions of the grass silage, a press juice and the fiber fraction, were evaluated for their possible use for bioethanol production. Direct production of ethanol from press juice is not possible due to high concentrations of organic acids. For the fiber fraction, alkaline peroxide or enzymatic pretreatment was used, which removes the phenolic acids in the cell wall. In this study, we demonstrate the possibility to integrate the enzymatic pretreatment with a simultaneous saccharification and fermentation to achieve ethanol production from grass silage in a one-process step. Achieved yields were about 53 g ethanol per kg silage with the alkaline peroxide pretreatment and 91 g/kg with the enzymatic pretreatment at concentrations of 8.5 and 14.6 g/L, respectively. Furthermore, it was shown that additional supplementation of the fermentation medium with vitamins, trace elements and nutrient salts is not necessary when the press juice is directly used in the fermentation step.},
  language  = {en}
}
@article{PothMonzonTippkoetteretal.2011,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery: Process integration of hydrolysis and fermentation (SSF process)},
  series = {Holzforschung},
  volume    = {65},
  journal   = {Holzforschung},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  pages     = {633 -- 637},
  year      = {2011},
  abstract  = {The aim of the present work is the process integration and the optimization of the enzymatic hydrolysis of wood and the following fermentation of the products to ethanol. The substrate is a fiber fraction obtained by organosolv pre-treatment of beech wood. For the ethanol production, a co-fermentation by two different yeasts (Saccharomyces cerevisiae and Pachysolen tannophilus) was carried out to convert glucose as well as xylose. Two approaches has been followed: 1. A two step process, in which the hydrolysis of the fiber fraction and the fermentation to product are separated from each other. 2. A process, in which the hydrolysis and the fermentation are carried out in one single process step as simultaneous saccharification and fermentation (SSF). Following the first approach, a yield of about 0.15 g ethanol per gram substrate can be reached. Based on the SSF, one process step can be saved, and additionally, the gained yield can be raised up to 0.3 g ethanol per gram substrate.},
  language  = {en}
}
@article{TippkoetterRoikaewUlberetal.2010,
  author    = {Tippk{\"o}tter, Nils and Roikaew, Wipa and Ulber, Roland and Hoffmann, Alexander and Denzler, Hans-J{\"o}rg and Buchholz, Heinrich},
  title     = {Paracoccus denitrificans for the effluent recycling during continuous denitrification of liquid food},
  series = {Biotechnology Progress},
  volume    = {26},
  journal   = {Biotechnology Progress},
  number    = {3},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {8756-7938},
  doi       = {10.1002/btpr.384},
  pages     = {756 -- 762},
  year      = {2010},
  abstract  = {Nitrate is an undesirable component of several foods. A typical case of contamination with high nitrate contents is whey concentrate, containing nitrate in concentrations up to 25 l. The microbiological removal of nitrate by Paracoccus denitrificans under formation of harmless nitrogen in combination with a cell retention reactor is described here. Focus lies on the resource-conserving design of a microbal denitrification process. Two methods are compared. The application of polyvinyl alcohol-immobilized cells, which can be applied several times in whey feed, is compared with the implementation of a two step denitrification system. First, the whey concentrate's nitrate is removed by ion exchange and subsequently the eluent regenerated by microorganisms under their retention by crossflow filtration. Nitrite and nitrate concentrations were determined by reflectometric color measurement with a commercially available Reflectoquant® device. Correction factors for these media had to be determined. During the pilot development, bioreactors from 4 to 250 mg·L-1 and crossflow units with membrane areas from 0.02 to 0.80 m2 were examined. Based on the results of the pilot plants, a scaling for the exemplary process of denitrifying 1,000 tons per day is discussed.},
  language  = {en}
}
@article{SiekerNeunerDimitrovaetal.2010,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Grassilage als Rohstoff f{\"u}r die chemische Industrie},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {8, Special Issue: Industrielle Nutzung nachwachsender Rohstoffe},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.201000088},
  pages     = {1153 -- 1159},
  year      = {2010},
  abstract  = {Grassilage stellt einen nachwachsenden Rohstoff mit großem Potenzial dar. Neben Cellulose und Hemicellulose enth{\"a}lt sie auch organische S{\"a}uren, insbesondere Milchs{\"a}ure. In einem Bioraffinerie-Projekt wird die Milchs{\"a}ure aus der Silage isoliert und mit gentechnisch optimierten St{\"a}mmen zu L-Lysin weiterverarbeitet. Die Lignocellulose wird hydrolysiert und zu Ethanol fermentiert. Ein besonderes Augenmerk liegt auf der Integration der unterschiedlichen Prozesse sowie der einzelnen Prozessschritte zu einem Gesamtprozess, der s{\"a}mtliche Inhaltsstoffe der Silage verwertet.},
  language  = {de}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@article{TippkoetterDeterdingUlber2008,
  author    = {Tippk{\"o}tter, Nils and Deterding, A. and Ulber, Roland},
  title     = {Determination of acetic acid in fermentation broth by gas-diffusion technique},
  series = {Engineering in Life Sciences},
  volume    = {8},
  journal   = {Engineering in Life Sciences},
  number    = {1, Special Issue: Technical Systems for the Use in Life Sciences},
  doi       = {10.1002/elsc.200820227},
  pages     = {62 -- 67},
  year      = {2008},
  abstract  = {Due to the interfering effects of acetic acid in many fermentation processes, a gas-diffusion technique was developed for the online determination of acetic acid. The measurements were accomplished with a flow diffusion analysis (FDA) unit from the TRACE Analytics GmbH, Braunschweig, Germany. The diffusion analysis is based on the UV-absorbance of acetic acid at 205 nm. The measurement was achieved by the separation of an acceptor and a carrier stream (acidified fermentation broth) using a gas permeable polytetrafluoroethylene (PTFE) membrane, whereby broth constituents that would otherwise disturb the UV-measurement of acetic acid, are held back efficiently. Merely, the fermentation by-products, e.g. formic acid, is capable of diffusing through the membrane. While formic acid can disturb the measurement, carbon dioxide does not absorb at 205 nm. The method operates with time-dependent sample enrichment. During the analysis, a small volume of the acceptor stream is stopped for a defined time interval in the acceptor chamber. During this period, the gaseous acetic acid diffuses through the membrane and is enriched in the acceptor chamber. Subsequently after the enrichment, the acceptor stream flows through a UV-detector. The intensity of the signal is proportional to the acetic acid concentration. Online measurements in bioreactors via a sterile filtration probe have been accomplished. A linear calibration in the range of 0.5-5.0 g/L acetic acid with a relative standard deviation of <5 \% was obtained. A sampling rate of 8 samples per hour was possible. The system was applied for the determination of acetic acid in E. coli fermentation broth. The instrument is easy to clean, very user-friendly and does not require any toxic or expensive reagents.},
  language  = {en}
}
@article{KapplerTanudyayaSchmittTippkoetteretal.2007,
  author    = {Kappler-Tanudyaya, Nathalie and Schmitt, Heike and Tippk{\"o}tter, Nils and Meyer, Lina and Lenzen, Sigurd and Ulber, Roland},
  title     = {Combination of biotransformation and chromatography for the isolation and purification of mannoheptulose},
  series = {Biotechnology Journal},
  volume    = {2},
  journal   = {Biotechnology Journal},
  number    = {6},
  issn      = {1860-7314},
  doi       = {10.1002/biot.200700004},
  pages     = {692 -- 699},
  year      = {2007},
  abstract  = {Mannoheptulose is a seven-carbon sugar. It is an inhibitor of glucose-induced insulin secretion due to its ability to selectively inhibit the enzyme glucokinase. An improved procedure for mannoheptulose isolation from avocados is described in this study (based upon the original method by La Forge). The study focuses on the combination of biotransformation and downstream processing (preparative chromatography) as an efficient method to produce a pure extract of mannoheptulose. The experiments were divided into two major phases. In the first phase, several methods and parameters were compared to optimize the mannoheptulose extraction with respect to efficiency and purity. In the second phase, a mass balance of mannoheptulose over the whole extraction process was undertaken to estimate the yield and efficiency of the total extraction process. The combination of biotransformation and preparative chromatography allowed the production of a pure mannoheptulose extract. In a biological test, the sugar inhibited the glucokinase enzyme activity efficiently.},
  language  = {en}
}
@article{RoeschKratzHeringetal.2016,
  author    = {R{\"o}sch, C. and Kratz, F. and Hering, T. and Trautmann, S. and Umanskaya, N. and Tippk{\"o}tter, Nils and M{\"u}ller-Renno, C.M. and Ulber, Roland and Hannig, M. and Ziegler, C.},
  title     = {Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity},
  series = {Colloids and Surfaces B: Biointerfaces},
  volume    = {149},
  journal   = {Colloids and Surfaces B: Biointerfaces},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.colsurfb.2016.09.048},
  pages     = {115 -- 121},
  year      = {2016},
  abstract  = {The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.},
  language  = {en}
}
@article{RothTippkoetter2016,
  author    = {Roth, Jasmine and Tippk{\"o}tter, Nils},
  title     = {Evaluation of lignocellulosic material for butanol production using enzymatic hydrolysate medium},
  series = {Cellulose Chemistry and Technology},
  volume    = {50},
  journal   = {Cellulose Chemistry and Technology},
  number    = {3-4},
  publisher = {Editura Academiei Romane},
  address   = {Bukarest},
  pages     = {405 -- 410},
  year      = {2016},
  abstract  = {Butanol is a promising gasoline additive and platform chemical that can be readily produced via acetone-butanolethanol (ABE) fermentation from pretreated lignocellulosic materials. This article examines lignocellulosic material from beech wood for ABE fermentation, using Clostridium acetobutylicum. First, the utilization of both C₅₋ (xylose) and C₆₋ (glucose) sugars as sole carbon source was investigated in static cultivation, using serum bottles and synthetic medium. The utilization of pentose sugar resulted in a solvent yield of 0.231 g·g_sugar⁻¹, compared to 0.262 g·g_sugar⁻¹ using hexose. Then, the Organosolv pretreated crude cellulose fibers (CF) were enzymatically decomposed, and the resulting hydrolysate medium was analyzed for inhibiting compounds (furans, organic acids, phenolics) and treated with ionexchangers for detoxification. Batch fermentation in a bioreactor using CF hydrolysate medium resulted in a total solvent yield of 0.20 gABE·g_sugar⁻¹.},
  language  = {en}
}
@article{AlKaidyTippkoetter2016,
  author    = {Al-Kaidy, Huschyar and Tippk{\"o}tter, Nils},
  title     = {Superparamagnetic hydrophobic particles as shell material for digital microfluidic droplets and proof-of-principle reaction assessments with immobilized laccase},
  series = {Engineering in Life Sciences},
  volume    = {16},
  journal   = {Engineering in Life Sciences},
  number    = {3},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201400124},
  pages     = {222 -- 230},
  year      = {2016},
  abstract  = {In the field of biotechnology and molecular biology, the use of small liquid volumes has significant advantages. In particular, screening and optimization runs with acceptable amounts of expensive and hardly available catalysts, reagents, or biomolecules are feasible with microfluidic technologies. The presented new microfluidic system is based on the inclusion of small liquid volumes by a protective shell of magnetizable microparticles. Hereby, discrete aqueous microreactor drops with volumes of 1-30 μL can be formed on a simple planar surface. A digital movement and manipulation of the microreactor is performed by overlapping magnetic forces. The magnetic forces are generated by an electrical coil matrix positioned below a glass plate. With the new platform technology, several discrete reaction compartments can be moved simultaneously on one surface. Due to the magnetic fields, the reactors can even be merged to initiate reactions by mixing or positioned above surface-immobilized catalysts and then opened by magnetic force. Comparative synthesis routes of the magnetizable shell particles and superhydrophobic glass slides including their performance and stability with the reaction platform are described. The influence of diffusive mass transport during the catalyzed reaction is discussed by evaluation finite element model of the microreactor. Furthermore, a first model dye reaction of the enzyme laccase has been established.},
  language  = {en}
}
@article{AlKaidyDuweHusteretal.2015,
  author    = {Al-Kaidy, Huschyar and Duwe, Anna and Huster, Manuel and Muffler, Kai and Schlegel, Christin and Tim, Sieker and Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Biotechnology and bioprocess engineering - from the first ullmann's article to recent trends},
  series = {ChemBioEng Reviews},
  volume    = {2},
  journal   = {ChemBioEng Reviews},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cben.201500008},
  pages     = {175 -- 184},
  year      = {2015},
  abstract  = {For several thousand years, biotechnology and its associated technical processes have had a great impact on the development of mankind. Based on empirical methods, in particular for the production of foodstuffs and daily commodities, these disciplines have become one of the most innovative future issues. Due to the increasing detailed understanding of cellular processes, production strains can now be optimized. In combination with modern bioprocesses, a variety of bulk and fine chemicals as well as pharmaceuticals can be produced efficiently. In this article, some of the current trends in biotechnology are discussed.},
  language  = {en}
}
@incollection{Tippkoetter2016,
  author    = {Tippk{\"o}tter, Nils},
  title     = {Grundlagen der bio-chemischen Umwandlung},
  series = {Energie aus Biomasse : Grundlagen, Techniken und Verfahren},
  booktitle = {Energie aus Biomasse : Grundlagen, Techniken und Verfahren},
  editor    = {Kaltschmidt, Martin},
  edition   = {3., aktualisierte, erweiterte Auflage},
  publisher = {Springer Vieweg},
  address   = {Berlin ; Heidelberg},
  isbn      = {978-3-662-47437-2 (Print)},
  doi       = {10.1007/978-3-662-47438-9},
  pages     = {1447 -- 1500},
  year      = {2016},
  language  = {de}
}
@incollection{HahnKellyMuffleretal.2011,
  author    = {Hahn, Thomas and Kelly, Svenja and Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Extraction of lignocellulose and algae for the production of bulk and fine chemicals},
  series = {Industrial scale natural products extraction},
  booktitle = {Industrial scale natural products extraction},
  editor    = {Hans-J{\"o}rg, Bart and Pilz, Stephan},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {978-3-527-32504-7 (Print)},
  doi       = {10.1002/9783527635122},
  pages     = {221 -- 245},
  year      = {2011},
  language  = {en}
}
@incollection{MufflerPothSiekeretal.2011,
  author    = {Muffler, Kai and Poth, Sabastian and Sieker, Tim and Tippk{\"o}tter, Nils and Ulber, Roland and Sell, Dieter},
  title     = {Bio-feedstocks},
  series = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  booktitle = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  editor    = {Moo-Young, Murray},
  edition   = {2. edition},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-444-53352-4},
  doi       = {10.1016/B978-0-08-088504-9.00088-X},
  pages     = {93 -- 101},
  year      = {2011},
  language  = {en}
}
@incollection{MufflerTippkoetterUlber2010,
  author    = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Chemical feedstocks and fine chemicals from other substrates},
  series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  editor    = {Timmis, Kenneth N.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-77588-1},
  doi       = {10.1007\%2F978-3-540-77587-4_214},
  pages     = {2891 -- 2902},
  year      = {2010},
  language  = {en}
}
@book{Tippkoetter2010,
  author    = {Tippk{\"o}tter, Nils},
  title     = {Reaktionssysteme zur Aufarbeitung und Umsetzung nachwachsender Rohstoffe : Einsatz chromatographischer Verfahren sowie Membran- und Festbettreaktoren zur Verarbeitung von Molke, St{\"a}rke und Cellulose},
  publisher = {Logos-Verlag},
  address   = {Berlin},
  isbn      = {978-3-8325-2717-4},
  pages     = {III, 269 Seiten},
  year      = {2010},
  language  = {de}
}
@inproceedings{PothMonzonTippkoetteretal.2010,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery : process integration of hydrolysis and fermentation},
  series = {Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany},
  booktitle = {Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany},
  publisher = {vTi},
  address   = {Hamburg},
  pages     = {65 -- 68},
  year      = {2010},
  language  = {en}
}
@article{TippkoetterWollnyKampeisetal.2011,
  author    = {Tippk{\"o}tter, Nils and Wollny, S. and Kampeis, P. and Oster, J. and Schneider, H. and Ulber, Roland},
  title     = {Magnetseparation von Proteinen : Separation von Zielmolek{\"u}len durch hochselektive Aptamere},
  series = {GIT Labor-Fachzeitschrift},
  volume    = {55},
  journal   = {GIT Labor-Fachzeitschrift},
  number    = {10},
  publisher = {Wiley},
  address   = {Weinheim},
  pages     = {666},
  year      = {2011},
  abstract  = {Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinit{\"a}ten mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln wird eine einstufige Separation von Zielmolek{\"u}len aus mikrobiologischen Produktionsans{\"a}tzen m{\"o}glich. Die Aptamere werden hierf{\"u}r reversibel auf den Partikeloberfl{\"a}chen gebunden und f{\"u}r die spezifische Isolierung von Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld.},
  language  = {de}
}
@article{SiekerUlberDimitrovaetal.2009,
  author    = {Sieker, Tim and Ulber, Roland and Dimitrova, Darina and Bart, Hans-J{\"o}rg and Neuner, Andreas and Heinzle, Elmar and Tippk{\"o}tter, Nils},
  title     = {Silage : Fermentationsrohstoff f{\"u}r die chemische Industrie?},
  series = {labor\&more},
  journal   = {labor\&more},
  number    = {2},
  pages     = {44 -- 45},
  year      = {2009},
  abstract  = {In Anbetracht des zu erwartenden R{\"u}ckgangs der Verf{\"u}gbarkeit fossiler Rohstoffe m{\"u}ssen nicht nur f{\"u}r den Energiesektor, sondern auch f{\"u}r die Herstellung industrieller Produkte alternative Rohstoffe gefunden werden. Ein Beispiel f{\"u}r einen nicht in Nahrungsmittelkonkurrenz stehenden nachwachsenden Rohstoff ist gr{\"u}ne Biomasse wie Gras und Klee. Diese lassen sich in Deutschland auf großen Fl{\"a}chen anbauen und enthalten eine Vielzahl potenzieller Substrate f{\"u}r Fermentationen.},
  language  = {de}
}
@article{AlKaidyKuthanHeringetal.2016,
  author    = {Al-Kaidy, Huschyar and Kuthan, Kai and Hering, Thomas and Tippk{\"o}tter, Nils},
  title     = {Aqueous droplets used as enzymatic microreactors and their electromagnetic actuation},
  series = {Journal of Visualized Experiments},
  journal   = {Journal of Visualized Experiments},
  number    = {Issue 126},
  issn      = {1940-087X},
  doi       = {10.3791/54643},
  year      = {2016},
  abstract  = {For the successful implementation of microfluidic reaction systems, such as PCR and electrophoresis, the movement of small liquid volumes is essential. In conventional lab-on-a-chip-platforms, solvents and samples are passed through defined microfluidic channels with complex flow control installations. The droplet actuation platform presented here is a promising alternative. With it, it is possible to move a liquid drop (microreactor) on a planar surface of a reaction platform (lab-in-a-drop). The actuation of microreactors on the hydrophobic surface of the platform is based on the use of magnetic forces acting on the outer shell of the liquid drops which is made of a thin layer of superhydrophobic magnetite particles. The hydrophobic surface of the platform is needed to avoid any contact between the liquid core and the surface to allow a smooth movement of the microreactor. On the platform, one or more microreactors with volumes of 10 µL can be positioned and moved simultaneously. The platform itself consists of a 3 x 3 matrix of electrical double coils which accommodate either neodymium or iron cores. The magnetic field gradients are automatically controlled. By variation of the magnetic field gradients, the microreactors' magnetic hydrophobic shell can be manipulated automatically to move the microreactor or open the shell reversibly. Reactions of substrates and corresponding enzymes can be initiated by merging the microreactors or bringing them into contact with surface immobilized catalysts.},
  language  = {en}
}
@article{BrabandPaulssenAbram2006,
  author    = {Braband, Henrik and Paulßen, Elisabeth and Abram, Ulrich},
  title     = {Nitridorhenium(V) Complexes with 1,3-Dialkyl-4,5-dimethylimidazole-2-ylidenes},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {632},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {6},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200600002},
  pages     = {1051 -- 1056},
  year      = {2006},
  language  = {en}
}
@article{PaulssenSchweighoeferAbram2010,
  author    = {Paulßen, Elisabeth and Schweigh{\"o}fer, Philip V. and Abram, Ulrich},
  title     = {Reactions of [ReOX3(PPh3)2] Complexes (X = Cl, Br) with Phenylacetylene and the Structures of the Products},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {636},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200900478},
  pages     = {779 -- 783},
  year      = {2010},
  abstract  = {Oxorhenium(V) complexes [ReOX3(PPh3)2] (X = Cl, Br) react with phenylacetylene under formation of complexes with ylide-type ligands. Compounds of the compositions [ReOCl3(PPh3){C(Ph)C(H)(PPh3)}] (1), [ReOBr3(OPPh3){C(Ph)C(H)(PPh3)}] (2), and [ReOBr3(OPPh3){C(H)C(Ph)(PPh3)}] (3) were isolated and characterized by X-ray diffraction. They contain a ligand, which was formed by a nucleophilic attack of released PPh3 at coordinated phenylacetylene. The structures of the products show that there is no preferable position for this attack. Cleavage of the Re-C bond in 3 and dimerization of the organic ligand resulted in the formation of the [{(PPh3)(H)CC(Ph)}2]2+ cation, which crystallized as its [(ReOBr4)(OReO3)]2- salt.},
  language  = {en}
}
@article{PaulssenKueckmannAbram2007,
  author    = {Paulßen, Elisabeth and K{\"u}ckmann, Theresa and Abram, Ulrich},
  title     = {Silver(I) Complexes of 1,3-Dialkyl-4,5-dimethylimidazol-2-ylidenes and their Use as Precursors for the Synthesis of Rhenium(V) NHC Complexes},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {633},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {5-6},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200700021},
  pages     = {830 -- 834},
  year      = {2007},
  language  = {en}
}
@article{BrabandYegenPaulssenetal.2005,
  author    = {Braband, Henrik and Yegen, Eda and Paulßen, Elisabeth and Abram, Ulrich},
  title     = {[{ReN(PMe2Ph)3}{ReO3N}]2 - Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2-},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {631},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {12},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200500240},
  pages     = {2408 -- 2410},
  year      = {2005},
  language  = {en}
}
@article{PaulssenAlbertoAbram2010,
  author    = {Paulßen, Elisabeth and Alberto, Roger and Abram, Ulrich},
  title     = {Synthesis, Characterization, and Structures of R3EOTcO3 Complexes (E = C, Si, Ge, Sn, Pb) and Related Compounds},
  series = {Inorganic Chemistry},
  volume    = {49},
  journal   = {Inorganic Chemistry},
  number    = {7},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1520-510X},
  doi       = {10.1021/ic1001094},
  pages     = {3525 -- 3530},
  year      = {2010},
  abstract  = {AgTcO4 reacts with R3ECl compounds (E = C, Si, Ge, Sn, Pb; R = Me, iPr, tBu, Ph), tBu2SnCl2, or PhMgCl under formation of novel trioxotechnetium(VII) derivatives. The carbon and silicon derivatives readily undergo decomposition, which was proven by 99Tc NMR spectroscopy and the isolation of decomposition products such as [TcOCl3(THF)(OH2)]. Compounds [Ph3GeOTcO3], [(THF)Ph3SnOTcO3], [(O3TcO)SntBu2(OH)]2, and [(THF)4Mg(OTcO3)2] are more stable and were isolated in crystalline form and characterized by X-ray diffraction.},
  language  = {en}
}
@article{PaulssenKongArciszewskietal.2012,
  author    = {Paulßen, Elisabeth and Kong, Shushu and Arciszewski, Pawel and Wielbalck, Swantje and Abram, Ulrich},
  title     = {Aryl and NHC Compounds of Technetium and Rhenium},
  series = {Journal of the American Chemical Society},
  volume    = {134},
  journal   = {Journal of the American Chemical Society},
  number    = {22},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5126},
  doi       = {10.1021/ja3033718},
  pages     = {9118 -- 9121},
  year      = {2012},
  abstract  = {Air- and water-stable phenyl complexes with nitridotechnetium(V) cores can be prepared by straightforward procedures. [TcNPh2(PPh3)2] is formed by the reaction of [TcNCl2(PPh3)2] with PhLi. The analogous N-heterocyclic carbene (NHC) compound [TcNPh2(HLPh)2], where HLPh is 1,3,4-triphenyl-1,2,4-triazol-5-ylidene, is available from (NBu4)[TcNCl4] and HLPh or its methoxo-protected form. The latter compound allows the comparison of different Tc-C bonds within one compound. Surprisingly, the Tc chemistry with such NHCs does not resemble that of corresponding Re complexes, where CH activation and orthometalation dominate.},
  language  = {en}
}
@article{BarbazanHagenbachPaulssenetal.2010,
  author    = {Barbaz{\´a}n, Paula and Hagenbach, Adelheid and Paulßen, Elisabeth and Abram, Ulrich and Carballo, Rosa and Rodriguez-Hermida, Sabina and V{\´a}zquez-L{\´o}pez, Ezequiel M.},
  title     = {Tricarbonyl Rhenium(I) and Technetium(I) Complexes with Hydrazones Derived from 4,5-Diazafluoren-9-one and 1,10-Phenanthroline-5,6-dione},
  series = {European Journal of Inorganic Chemistry},
  journal   = {European Journal of Inorganic Chemistry},
  number    = {29},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0682},
  doi       = {10.1002/ejic.201000522},
  pages     = {4622 -- 4630},
  year      = {2010},
  abstract  = {Tricarbonylrhenium(I) and -technetium(I) halide (halide = Cl and Br) complexes of ligands derived from 4,5-diazafluoren-9-one (df) and 1,10-phenanthroline-5,6-dione (phen) derivatives of benzoic and 2-hydroxybenzoic acid hydrazides have been prepared. The complexes have been characterized by elemental analysis, MS, IR, 1H NMR and absorption and emission UV/Vis spectroscopic methods. The metal centres (ReI and TcI) are coordinated through the nitrogen imine atoms and establish five-membered chelate rings, whereas the hydrazone groups stand uncoordinated. The 1H NMR spectra suggest the same behaviour in solution on the basis of only marginal variations in the chemical shifts of the hydrazine protons.},
  language  = {en}
}
@article{PaulssenNgyugenKahlckeetal.2012,
  author    = {Paulßen, Elisabeth and Ngyugen, Hung Huy and Kahlcke, Nils and Deflon, Victor M. and Abram, Ulrich},
  title     = {Tricarbonyltechnetium(I) and -rhenium(I) complexes with N′-thiocarbamoylpicolylbenzamidines},
  series = {Polyhedron},
  volume    = {40},
  journal   = {Polyhedron},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0277-5387},
  doi       = {10.1016/j.poly.2012.04.008},
  pages     = {153 -- 158},
  year      = {2012},
  abstract  = {N,N-Dialkylamino(thiocarbonyl)-N′-picolylbenzamidines react with (NEt4)2[M(CO)3X3] (M = Re, X = Br; M = Tc, X = Cl) under formation of neutral [M(CO)3L] complexes in high yields. The monoanionic NNS ligands bind in a facial coordination mode and can readily be modified at the (CS)NR1R2 moiety. The complexes [99Tc(CO)3(LPyMor)] and [Re(CO)3(L)] (L = LPyMor, LPyEt) were characterized by X-ray diffraction. Reactions of [99mTc(CO)3(H2O)3]+ with the N′-thiocarbamoylpicolylbenzamidines give the corresponding 99mTc complexes. The ester group in HLPyCOOEt allows linkage between biomolecules and the metal core.},
  language  = {en}
}
@article{PellegriniHowellShepherdetal.2013,
  author    = {Pellegrini, Paul A. and Howell, Nicholas R. and Shepherd, Rachael K. and Lengkeek, Nigel A. and Paulßen, Elisabeth and Katsifis, Andrew G. and Greguric, Ivan},
  title     = {Synthesis and Radiolabelling of DOTA-Linked Glutamine Analogues with 67,68Ga as Markers for Increased Glutamine Metabolism in Tumour Cells},
  series = {Molecules},
  volume    = {18},
  journal   = {Molecules},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1420-3049},
  doi       = {10.3390/molecules18067160},
  pages     = {7160 -- 7178},
  year      = {2013},
  language  = {en}
}
@article{PaulssenLeLengkeeketal.2013,
  author    = {Paulßen, Elisabeth and Le, Van So and Lengkeek, Nigel and Pellegrini, Paul and Jackson, Tim and Greguric, Ivan and Weiner, Ron},
  title     = {Influence of Metal Ions on the 68Ga-labeling of DOTATATE},
  series = {Applied Radiation and Isotopes},
  volume    = {82},
  journal   = {Applied Radiation and Isotopes},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9800},
  doi       = {10.1016/j.apradiso.2013.08.010},
  pages     = {232 -- 238},
  year      = {2013},
  language  = {en}
}
@article{PaulssenLengkeekLeetal.2016,
  author    = {Paulßen, Elisabeth and Lengkeek, Nigel A. and Le, Van So and Pellegrini, Paul A. and Greguric, Ivan and Weiner, Ron},
  title     = {The role of additives in moderating the influence of Fe(III) and Cu(II) on the radiochemical yield of [⁶⁸Ga(DOTATATE)]},
  series = {Applied Radiation and Isotopes},
  volume    = {107},
  journal   = {Applied Radiation and Isotopes},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9800},
  doi       = {10.1016/j.apradiso.2015.09.008},
  pages     = {13 -- 16},
  year      = {2016},
  abstract  = {[⁶⁸Ga(DOTATATE)] has demonstrated its clinical usefulness. Both Fe³⁺ and Cu²⁺, potential contaminants in Gallium-68 generator eluent, substantially reduce the radiochemical (RC) yield of [⁶⁸Ga(DOTATATE)] if the metal/ligand ratio of 1:1 is exceeded. A variety of compounds were examined for their potential ability to reduce this effect. Most had no effect on RC yield. However, addition of phosphate diminished the influence of Fe³⁺ by likely forming an insoluble iron salt. Addition of ascorbic acid reduced Cu²⁺ and Fe³⁺ to Cu⁺ and Fe²⁺ respectively, both of which have limited impact on RC yields. At low ligand amounts (5 nmol DOTATATE), the addition of 30 nmol phosphate (0.19 mM) increased the tolerance of Fe3⁺ from 4 nmol to 10 nmol (0.06 mM), while the addition of ascorbic acid allowed high RC yields (>95\%) in the presence of 40 nmol Fe³⁺ (0.25 mM) and 100 nmol Cu²⁺ (0.63 mM). The effect of ascorbic acid was highly pH-dependant, and gave optimal results at pH 3.},
  language  = {en}
}
@article{PaulssenHoehrHouetal.2015,
  author    = {Paulßen, Elisabeth and Hoehr, Cornelia and Hou, Xinchi and Hanemaayer, Victoire and Zeisler, Stefan and Adam, Michael J. and Ruth, Thomas J. and Celler, Anna and Buckley, Ken and Benard, Francois and Schaffer, Paul},
  title     = {Production of Y-86 and other radiometals for research purposes using a solution target system},
  series = {Nuclear medicine and biology},
  volume    = {42},
  journal   = {Nuclear medicine and biology},
  number    = {11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9614},
  doi       = {10.1016/j.nucmedbio.2015.06.005},
  pages     = {842 -- 849},
  year      = {2015},
  language  = {en}
}
@article{HoehrPaulssenBenardetal.2014,
  author    = {Hoehr, Cornelia and Paulßen, Elisabeth and Benard, Francois and Lee, Chris Jaeil and Hou, Xinchi and Badesso, Brian and Ferguson, Simon and Miao, Qing and Yang, Hua and Buckley, Ken and Hanemaayer, Victoire and Zeisler, Stefan and Ruth, Thomas and Celler, Anna and Schaffer, Paul},
  title     = {⁴⁴ᶢSc production using a water target on a 13 MeV cyclotron},
  series = {Nuclear medicine and biology},
  volume    = {41},
  journal   = {Nuclear medicine and biology},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9614},
  doi       = {10.1016/j.nucmedbio.2013.12.016},
  pages     = {401 -- 406},
  year      = {2014},
  abstract  = {Access to promising radiometals as isotopes for novel molecular imaging agents requires that they are routinely available and inexpensive to obtain. Proximity to a cyclotron center outfitted with solid target hardware, or to an isotope generator for the metal of interest is necessary, both of which can introduce significant hurdles in development of less common isotopes. Herein, we describe the production of ⁴⁴Sc (t₁⸝₂ = 3.97 h, Eavg,β⁺ = 1.47 MeV, branching ratio = 94.27\%) in a solution target and an automated loading system which allows a quick turn-around between different radiometallic isotopes and therefore greatly improves their availability for tracer development. Experimental yields are compared to theoretical calculations.},
  language  = {en}
}