@article{DeppeKlatteBongaertsetal.2011,
  author    = {Deppe, Veronika Maria and Klatte, Stephanie and Bongaerts, Johannes and Maurer, Karl-Heinz and O'Connell, Timothy and Meinhardt, Friedhelm},
  title     = {Genetic control of Amadori product degradation in Bacillus subtilis via regulation of frlBONMD expression by FrlR},
  series = {Applied and environmental microbiology},
  volume    = {Vol. 77},
  journal   = {Applied and environmental microbiology},
  number    = {No. 9},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  issn      = {1098-5336 (E-Journal); 0003-6919 (Print); 0099-2240 (Print)},
  pages     = {2839 -- 2846},
  year      = {2011},
  language  = {en}
}
@article{UlberTippkoetterBuchholzetal.2008,
  author    = {Ulber, Roland and Tippk{\"o}tter, Nils and Buchholz, H. and Demmer, W. and Scheper, T.},
  title     = {Innovative Verfahren in der Molkeaufarbeitung zur Gewinnung neuer Produkte},
  series = {Deutsche Milchwirtschaft},
  volume    = {59},
  journal   = {Deutsche Milchwirtschaft},
  number    = {19},
  issn      = {0012-0480},
  pages     = {704 -- 706},
  year      = {2008},
  language  = {de}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@inproceedings{EngelThieringerTippkoetter2016,
  author    = {Engel, M. and Thieringer, J. and Tippk{\"o}tter, Nils},
  title     = {Microbial electrosynthesis for sustainable biobutanol production},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {77 -- 78},
  year      = {2016},
  language  = {en}
}
@article{BorgmeierBongaertsMeinhardt2012,
  author    = {Borgmeier, Claudia and Bongaerts, Johannes and Meinhardt, Friedhelm},
  title     = {Genetic analysis of the Bacillus licheniformis degSU operon and the impact of regulatory mutations on protease production},
  series = {Journal of biotechnology},
  volume    = {159},
  journal   = {Journal of biotechnology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2012.02.011},
  pages     = {12 -- 20},
  year      = {2012},
  abstract  = {Disruption experiments targeted at the Bacillus licheniformis degSU operon and GFP-reporter analysis provided evidence for promoter activity immediately upstream of degU. pMutin mediated concomitant introduction of the degU32 allele - known to cause hypersecretion in Bacillus subtilis - resulted in a marked increase in protease activity. Application of 5-fluorouracil based counterselection through establishment of a phosphoribosyltransferase deficient Δupp strain eventually facilitated the marker-free introduction of degU32 leading to further protease enhancement achieving levels as for hypersecreting wild strains in which degU was overexpressed. Surprisingly, deletion of rapG - known to interfere with DegU DNA-binding in B. subtilis - did not enhance protease production neither in the wild type nor in the degU32 strain. The combination of degU32 and Δupp counterselection in the type strain is not only equally effective as in hypersecreting wild strains with respect to protease production but furthermore facilitates genetic strain improvement aiming at biological containment and effectiveness of biotechnological processes.},
  language  = {en}
}
@article{MolinnusSorichBartzetal.2016,
  author    = {Molinnus, Denise and Sorich, Maren and Bartz, Alexander and Siegert, Petra and Willenberg, Holger S. and Lisdat, Fred and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards an adrenaline biosensor based on substrate recycling amplification in combination with an enzyme logic gate},
  series = {Sensors and Actuators B: Chemical},
  volume    = {237},
  journal   = {Sensors and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2016.06.064},
  pages     = {190 -- 195},
  year      = {2016},
  abstract  = {An amperometric biosensor using a substrate recycling principle was realized for the detection of low adrenaline concentrations (1 nM) by measurements in phosphate buffer and Ringer's solution at pH 6.5 and pH 7.4, respectively. In proof-of-concept experiments, a Boolean logic-gate principle has been applied to develop a digital adrenaline biosensor based on an enzyme AND logic gate. The obtained results demonstrate that the developed digital biosensor is capable for a rapid qualitative determination of the presence/absence of adrenaline in a YES/NO statement. Such digital biosensor could be used in clinical diagnostics for the control of a correct insertion of a catheter in the adrenal veins during adrenal venous-sampling procedure.},
  language  = {en}
}
@article{BaeckerBegingBisellietal.2009,
  author    = {B{\"a}cker, Matthias and Beging, Stefan and Biselli, Manfred and Poghossian, Arshak and Wang, J. and Zang, Werner and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Concept for a solid-state multi-parameter sensor system for cell-culture monitoring},
  series = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  journal   = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0013-4686},
  pages     = {6107 -- 6112},
  year      = {2009},
  language  = {en}
}
@article{BiselliBaeckerPoghossianetal.2010,
  author    = {Biselli, Manfred and B{\"a}cker, Matthias and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Schnitzler, Thomas and Zang, Werner and Wagner, P.},
  title     = {Entwicklung eines modularen festk{\"o}rperbasierten Sensorsystems f{\"u}r die {\"U}berwachung von Zellkulturfermenationen},
  series = {Sensoren und Messsysteme 2010 [Elektronische Ressource] : Vortr{\"a}ge der 15. ITG/GMA-Fachtagung vom 18. bis 19. Mai 2010 in N{\"u}rnberg / Informationstechnische Gesellschaft im VDE (ITG); VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  journal   = {Sensoren und Messsysteme 2010 [Elektronische Ressource] : Vortr{\"a}ge der 15. ITG/GMA-Fachtagung vom 18. bis 19. Mai 2010 in N{\"u}rnberg / Informationstechnische Gesellschaft im VDE (ITG); VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {688 -- 691},
  year      = {2010},
  language  = {de}
}
@inproceedings{TippkoetterSchuenemannChristmannetal.2008,
  author    = {Tippk{\"o}tter, Nils and Sch{\"u}nemann, V. and Christmann, R. and Pasteur, A. and Schweizer, J. and Ulber, Roland},
  title     = {Bioaffinity Layering magnetisierbarer Mikro- und Nanopartikel},
  series = {Technische Systeme f{\"u}r die Lebenswissenschaften : 14. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 22.09. - 24.09.2008},
  booktitle = {Technische Systeme f{\"u}r die Lebenswissenschaften : 14. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 22.09. - 24.09.2008},
  editor    = {Beckmann, Dieter},
  address   = {Heiligenstadt},
  isbn      = {978-3-00-025695-0},
  pages     = {97 -- 98},
  year      = {2008},
  language  = {de}
}
@article{HuckSchiffelsHerreraetal.2013,
  author    = {Huck, Christina and Schiffels, Johannes and Herrera, Cony N. and Schelden, Maximilian and Selmer, Thorsten and Poghossian, Arshak and Baumann, Marcus and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Metabolic responses of Escherichia coli upon glucose pulses captured by a capacitive field-effect sensor},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0031-8965},
  doi       = {10.1002/pssa.201200900},
  pages     = {926 -- 931},
  year      = {2013},
  abstract  = {Living cells are complex biological systems transforming metabolites taken up from the surrounding medium. Monitoring the responses of such cells to certain substrate concentrations is a challenging task and offers possibilities to gain insight into the vitality of a community influenced by the growth environment. Cell-based sensors represent a promising platform for monitoring the metabolic activity and thus, the "welfare" of relevant organisms. In the present study, metabolic responses of the model bacterium Escherichia coli in suspension, layered onto a capacitive field-effect structure, were examined to pulses of glucose in the concentration range between 0.05 and 2 mM. It was found that acidification of the surrounding medium takes place immediately after glucose addition and follows Michaelis-Menten kinetic behavior as a function of the glucose concentration. In future, the presented setup can, therefore, be used to study substrate specificities on the enzymatic level and may as well be used to perform investigations of more complex metabolic responses. Conclusions and perspectives highlighting this system are discussed.},
  language  = {en}
}
@article{ThielTippkoetterSucketal.2013,
  author    = {Thiel, Alexander and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {New zeolite adsorbents for downstream processing of polyphenols from renewable resources},
  series = {Engineering in Life Sciences},
  volume    = {13},
  journal   = {Engineering in Life Sciences},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/elsc.201200188},
  pages     = {239 -- 246},
  year      = {2013},
  abstract  = {Commercial materials with polyvinylpolypyrrolidone and polymeric amberlites (XAD7HP, XAD16) are commonly used for the adsorptive downstream processing of polyphenols from renewable resources. In this study, beta-zeolite-based adsorbent systems were examined, and their properties were compared to organic resins. Batch adsorption experiments were conducted with synthetic solutions of major polyphenols. Adsorption isotherms and desorption characteristics of individual adsorbent were determined based on these results. Maximum adsorption capacities were calculated using the Langmuir model. For example, the zeolites had capacities up to 203.2 mg/g for ferulic acid. To extend these results to a complex system, additional experiments were performed on rapeseed meal and wheat seed extracts as representative renewable resources. HPLC analysis showed that with 7.5\% w/v, which is regarded as the optimum amount of zeolites, zeolites A and B could bind 100\% of the major polyphenols as well as release polyphenols at high yields. Additionally, regeneration experiments were performed with isopropyl alcohol at 99°C to evaluate how zeolites regenerate under mild conditions. The results showed only a negligible loss of adsorption capacity and no loss of desorption capacity. In summary, it was concluded that beta-zeolites were promising adsorbents for developing new processes to isolate polyphenols from renewable resources.},
  language  = {en}
}
@article{TeumerCapitainRossJonesetal.2018,
  author    = {Teumer, T. and Capitain, C. and Ross-Jones, J. and Tippk{\"o}tter, Nils and R{\"a}dle, M. and Methner, F.-J.},
  title     = {In-line Haze Monitoring Using a Spectrally Resolved Back Scattering Sensor},
  series = {BrewingScience},
  volume    = {71},
  journal   = {BrewingScience},
  number    = {5/6},
  publisher = {Fachverlag Hans Carl},
  address   = {N{\"u}rnberg},
  issn      = {1613-2041},
  pages     = {49 -- 55},
  year      = {2018},
  abstract  = {In the present work an optical sensor in combination with a spectrally resolved detection device for in-line particle-size-monitoring for quality control in beer production is presented. The principle relies on the size and wavelength dependent backscatter of growing particles in fluids. Measured interference structures of backscattered light are compared with calculated theoretical values, based on Mie-Theory, and fitted with a linear least square method to obtain particle size distributions. For this purpose, a broadband light source in combination with a process-CCD-spectrometer (charge ? coupled device spectrometer) and process adapted fiber optics are used. The goal is the development of an easy and flexible measurement device for in-line-monitoring of particle size. The presented device can be directly installed in product fill tubes or vessels, follows CIP- (cleaning in place) and removes the need of sample taking. A proof of concept and preliminary results, measuring protein precipitation, are presented.},
  language  = {en}
}
@techreport{TippkoetterWagner2019,
  author    = {Tippk{\"o}tter, Nils and Wagner, Sebastian},
  title     = {Biomimetischer Klebstoff aus ligninhaltigen Pflanzenresten (Teilvorhaben 1 und 2) : Schlussbericht zum Vorhaben : Laufzeit: 01.01.2016 bis 31.03.2019},
  publisher = {FH Aachen},
  address   = {J{\"u}lich},
  doi       = {10.2314/KXP:169732777X},
  pages     = {109 S.},
  year      = {2019},
  language  = {de}
}
@article{RoeschKratzHeringetal.2016,
  author    = {R{\"o}sch, C. and Kratz, F. and Hering, T. and Trautmann, S. and Umanskaya, N. and Tippk{\"o}tter, Nils and M{\"u}ller-Renno, C.M. and Ulber, Roland and Hannig, M. and Ziegler, C.},
  title     = {Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity},
  series = {Colloids and Surfaces B: Biointerfaces},
  volume    = {149},
  journal   = {Colloids and Surfaces B: Biointerfaces},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.colsurfb.2016.09.048},
  pages     = {115 -- 121},
  year      = {2016},
  abstract  = {The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.},
  language  = {en}
}
@article{MolinnusBaeckerSiegertetal.2015,
  author    = {Molinnus, Denise and B{\"a}cker, Matthias and Siegert, Petra and Willenberg, H. and Poghossian, Arshak and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline Based on Substrate Recycling Amplification},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.708},
  pages     = {540 -- 543},
  year      = {2015},
  abstract  = {An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.},
  language  = {en}
}
@article{TippkoetterWollnyKampeisetal.2011,
  author    = {Tippk{\"o}tter, Nils and Wollny, S. and Kampeis, P. and Oster, J. and Schneider, H. and Ulber, Roland},
  title     = {Magnetseparation von Proteinen : Separation von Zielmolek{\"u}len durch hochselektive Aptamere},
  series = {GIT Labor-Fachzeitschrift},
  volume    = {55},
  journal   = {GIT Labor-Fachzeitschrift},
  number    = {10},
  publisher = {Wiley},
  address   = {Weinheim},
  pages     = {666},
  year      = {2011},
  abstract  = {Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinit{\"a}ten mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln wird eine einstufige Separation von Zielmolek{\"u}len aus mikrobiologischen Produktionsans{\"a}tzen m{\"o}glich. Die Aptamere werden hierf{\"u}r reversibel auf den Partikeloberfl{\"a}chen gebunden und f{\"u}r die spezifische Isolierung von Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld.},
  language  = {de}
}
@incollection{WagemannTippkoetter2018,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries: a short introduction},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_4},
  pages     = {1 -- 11},
  year      = {2018},
  abstract  = {The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.},
  language  = {en}
}
@article{WulfhorstDuweMerseburgetal.2016,
  author    = {Wulfhorst, Helene and Duwe, Anna-Maria and Merseburg, Johannes and Tippk{\"o}tter, Nils},
  title     = {Compositional analysis of pretreated (beech) wood using differential scanning calorimetry and multivariate data analysis},
  series = {Tetrahedron},
  volume    = {72},
  journal   = {Tetrahedron},
  number    = {46},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.tet.2016.04.029},
  pages     = {7329 -- 7334},
  year      = {2016},
  abstract  = {The composition of plant biomass varies depending on the feedstock and pre-treatment conditions and influences its processing in biorefineries. In order to ensure optimal process conditions, the quantitative proportion of the main polymeric components of the pre-treated biomass has to be determined. Current standard procedures for biomass compositional analysis are complex, the measurements are afflicted with errors and therefore often not comparable. Hence, new powerful analytical methods are urgently required to characterize biomass. In this contribution, Differential Scanning Calorimetry (DSC) was applied in combination with multivariate data analysis (MVA) to detect the cellulose content of the plant biomass pretreated by Liquid Hot Water (LHW) and Organosolv processes under various conditions. Unlike conventional techniques, the developed analytic method enables the accurate quantification of monosaccharide content of the plant biomass without any previous sample preparation. It is easy to handle and avoids errors in sample preparation.},
  language  = {en}
}
@techreport{Tippkoetter2018,
  author    = {Tippk{\"o}tter, Nils},
  title     = {Lokale Vorbehandlung nachwachsender Rohstoffe f{\"u}r Bioraffinerien (BioSats) : Schlussbericht zum Vorhaben : Laufzeit: 01.03.2012 bis 30.04.2017},
  organization    = {Technische Universit{\"a}t Kaiserslautern},
  doi       = {10.2314/GBV:1024204243},
  pages     = {191 Seiten},
  year      = {2018},
  language  = {de}
}
@article{WackwitzBongaertsGoodmanetal.1999,
  author    = {Wackwitz, B. and Bongaerts, Johannes and Goodman, S. D. and Unden, Gottfried},
  title     = {Growth phase-dependent regulation of nuoA-N expression in Escherichia coli K-12 by the Fis protein: upstream binding sites and bioenergetic significance},
  series = {Molecular and general genetics : MGG},
  volume    = {Vol. 262},
  journal   = {Molecular and general genetics : MGG},
  number    = {Iss. 4 - 5},
  issn      = {1617-4623 (E-Journal); 1617-4615 (Print)},
  pages     = {876 -- 883},
  year      = {1999},
  language  = {en}
}
@article{TippkoetterRoikaewUlber2008,
  author    = {Tippk{\"o}tter, Nils and Roikaew, W. and Ulber, Roland},
  title     = {Nitrate removal from whey concentrate with biotechnological regeneration of the waste water},
  series = {European dairy magazine : EDM},
  journal   = {European dairy magazine : EDM},
  number    = {1},
  isbn      = {0936-6318},
  pages     = {30 -- 32},
  year      = {2008},
  language  = {en}
}
@article{UndenBeckerBongaertsetal.1995,
  author    = {Unden, G. and Becker, S. and Bongaerts, Johannes and Holighaus, G. and Schirawski, J. and Six, S.},
  title     = {O2-sensing and O2-dependent gene regulation in facultatively anaerobic bacteria},
  series = {Archives of microbiology},
  volume    = {Vol. 164},
  journal   = {Archives of microbiology},
  number    = {Iss. 2},
  issn      = {1432-072X (E-Journal); 0003-9276 (Print); 0302-8933 (Print)},
  pages     = {81 -- 90},
  year      = {1995},
  language  = {en}
}
@inproceedings{TippkoetterStueckmannWinkelmannetal.2007,
  author    = {Tippk{\"o}tter, Nils and St{\"u}ckmann, H. and Winkelmann, G. and Noack, U. and Beutel, S. and Scheper, T. and Ulber, Roland},
  title     = {Optimisation of antibody-labelling of gold colloids for their application in an immunchromatographic assay for microcystin-LR},
  series = {European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme},
  booktitle = {European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme},
  publisher = {Dechema},
  address   = {Frankfurt am Main},
  pages     = {126},
  year      = {2007},
  language  = {en}
}
@misc{AlKaidyTippkoetterUlber2016,
  author    = {Al-Kaidy, Huschyar and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Vorrichtung und Verfahren zur Bestimmung des Kontaktwinkels eines Fl{\"u}ssigk{\"o}rpers mit einer Festk{\"o}rperoberfl{\"a}che},
  year      = {2016},
  abstract  = {Die vorliegende Erfindung betrifft eine Vorrichtung und ein Verfahren zur Bestimmung des Kontaktwinkels eines fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rpers. Dieser besteht aus einem Tr{\"a}ger (1) und einer damit verbundenen, in einem Winkelbereich von mehr als 0 ° bis maximal 90 ° neigbaren Ebene (8) mit einer darin ausgebildeten Abrollbahn (9) f{\"u}r den fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rper. An der Ebene (8) sind mehrere Sensoren (11,12) zur Erfassung der Rolldauer des K{\"o}rpers entlang der Rollstrecke angeordnet. Erfindungsgem{\"a}ß ist vorgesehen, dass die Einstellung des Neigungswinkels der Ebene (8) {\"u}ber ein Winkelmessger{\"a}t (10) erfolgt, wodurch ein Abrollwinkel erfassbar ist, bei dem der K{\"o}rper in Bewegung ger{\"a}t. Aus der Rolldauer, der Rollstrecke und dem Abrollwinkel wird der Kontaktwinkel des K{\"o}rpers ermittelt.},
  language  = {de}
}
@article{TippkoetterDeterdingUlber2008,
  author    = {Tippk{\"o}tter, Nils and Deterding, A. and Ulber, Roland},
  title     = {Determination of acetic acid in fermentation broth by gas-diffusion technique},
  series = {Engineering in Life Sciences},
  volume    = {8},
  journal   = {Engineering in Life Sciences},
  number    = {1, Special Issue: Technical Systems for the Use in Life Sciences},
  doi       = {10.1002/elsc.200820227},
  pages     = {62 -- 67},
  year      = {2008},
  abstract  = {Due to the interfering effects of acetic acid in many fermentation processes, a gas-diffusion technique was developed for the online determination of acetic acid. The measurements were accomplished with a flow diffusion analysis (FDA) unit from the TRACE Analytics GmbH, Braunschweig, Germany. The diffusion analysis is based on the UV-absorbance of acetic acid at 205 nm. The measurement was achieved by the separation of an acceptor and a carrier stream (acidified fermentation broth) using a gas permeable polytetrafluoroethylene (PTFE) membrane, whereby broth constituents that would otherwise disturb the UV-measurement of acetic acid, are held back efficiently. Merely, the fermentation by-products, e.g. formic acid, is capable of diffusing through the membrane. While formic acid can disturb the measurement, carbon dioxide does not absorb at 205 nm. The method operates with time-dependent sample enrichment. During the analysis, a small volume of the acceptor stream is stopped for a defined time interval in the acceptor chamber. During this period, the gaseous acetic acid diffuses through the membrane and is enriched in the acceptor chamber. Subsequently after the enrichment, the acceptor stream flows through a UV-detector. The intensity of the signal is proportional to the acetic acid concentration. Online measurements in bioreactors via a sterile filtration probe have been accomplished. A linear calibration in the range of 0.5-5.0 g/L acetic acid with a relative standard deviation of <5 \% was obtained. A sampling rate of 8 samples per hour was possible. The system was applied for the determination of acetic acid in E. coli fermentation broth. The instrument is easy to clean, very user-friendly and does not require any toxic or expensive reagents.},
  language  = {en}
}
@article{BaeckerRakowskiPoghossianetal.2013,
  author    = {B{\"a}cker, Matthias and Rakowski, D. and Poghossian, Arshak and Biselli, Manfred and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Chip-based amperometric enzyme sensor system for monitoring of bioprocesses by flow-injection analysis},
  series = {Journal of Biotechnology},
  volume    = {163},
  journal   = {Journal of Biotechnology},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-1656},
  doi       = {10.1016/j.jbiotec.2012.03.014},
  pages     = {371 -- 376},
  year      = {2013},
  abstract  = {A microfluidic chip integrating amperometric enzyme sensors for the detection of glucose, glutamate and glutamine in cell-culture fermentation processes has been developed. The enzymes glucose oxidase, glutamate oxidase and glutaminase were immobilized by means of cross-linking with glutaraldehyde on platinum thin-film electrodes integrated within a microfluidic channel. The biosensor chip was coupled to a flow-injection analysis system for electrochemical characterization of the sensors. The sensors have been characterized in terms of sensitivity, linear working range and detection limit. The sensitivity evaluated from the respective peak areas was 1.47, 3.68 and 0.28 μAs/mM for the glucose, glutamate and glutamine sensor, respectively. The calibration curves were linear up to a concentration of 20 mM glucose and glutamine and up to 10 mM for glutamate. The lower detection limit amounted to be 0.05 mM for the glucose and glutamate sensor, respectively, and 0.1 mM for the glutamine sensor. Experiments in cell-culture medium have demonstrated a good correlation between the glutamate, glutamine and glucose concentrations measured with the chip-based biosensors in a differential-mode and the commercially available instrumentation. The obtained results demonstrate the feasibility of the realized microfluidic biosensor chip for monitoring of bioprocesses.},
  language  = {en}
}
@article{TranBongaertsVladetal.1997,
  author    = {Tran, Quang Hon and Bongaerts, Johannes and Vlad, Dorina and Unden, Gottfried},
  title     = {Requirement for the proton-pumping NADH dehydrogenase I of Escherichia coli in respiration of NADH to fumarate and its bioenergetic implications},
  series = {European journal of biochemistry},
  volume    = {Vol. 244},
  journal   = {European journal of biochemistry},
  number    = {Iss. 1},
  issn      = {0014-2956},
  pages     = {155 -- 160},
  year      = {1997},
  language  = {en}
}
@article{WiegandVoigtAlbrechtetal.2013,
  author    = {Wiegand, Sandra and Voigt, Birgit and Albrecht, Dirk and Bongaerts, Johannes and Evers, Stefan and Hecker, Michael and Daniel, Rolf and Liesegang, Heiko},
  title     = {Fermentation stage-dependent adaptations of Bacillus licheniformis during enzyme production},
  series = {Microbial Cell Factories},
  volume    = {12},
  journal   = {Microbial Cell Factories},
  publisher = {Biomed Central},
  address   = {London},
  issn      = {1475-2859},
  doi       = {10.1186/1475-2859-12-120},
  pages     = {120},
  year      = {2013},
  language  = {en}
}
@inproceedings{TippkoetterRoikaewUlber2008,
  author    = {Tippk{\"o}tter, Nils and Roikaew, W. and Ulber, Roland},
  title     = {An automated pilot plant for the bioengineering processing of concentrated whey},
  series = {European BioPerspectives : in cooperation with BIOTECHNICA 2008 : 7 - 9 October 2008 Hannover, Germany ; book of abstracts ; abstracts, poster programme},
  booktitle = {European BioPerspectives : in cooperation with BIOTECHNICA 2008 : 7 - 9 October 2008 Hannover, Germany ; book of abstracts ; abstracts, poster programme},
  publisher = {Dechema},
  address   = {Frankfurt am Main},
  pages     = {98},
  year      = {2008},
  language  = {en}
}
@article{SchoeningBiselliSelmeretal.2012,
  author    = {Sch{\"o}ning, Michael Josef and Biselli, Manfred and Selmer, Thorsten and {\"O}hlschl{\"a}ger, Peter and Baumann, Marcus and F{\"o}rster, Arnold and Poghossian, Arshak},
  title     = {Forschung „zwischen" den Disziplinen: das Institut f{\"u}r Nano- und Biotechnologien},
  series = {Analytik news : das Online-Labormagazin f{\"u}r Labor und Analytik},
  volume    = {Publ. online},
  journal   = {Analytik news : das Online-Labormagazin f{\"u}r Labor und Analytik},
  publisher = {Dr. Beyer Internet-Beratung},
  address   = {Ober-Ramstadt},
  pages     = {11 Seiten},
  year      = {2012},
  abstract  = {"Biologie trifft Mikroelektronik", das Motto des Instituts f{\"u}r Nano- und Biotechnologien (INB) an der FH Aachen, unterstreicht die zunehmende Bedeutung interdisziplin{\"a}r gepr{\"a}gter Forschungsaktivit{\"a}ten. Der thematische Zusammenschluss grundst{\"a}ndiger Disziplinen, wie die Physik, Elektrotechnik, Chemie, Biologie sowie die Materialwissenschaften, l{\"a}sst neue Forschungsgebiete entstehen, ein herausragendes Beispiel hierf{\"u}r ist die Nanotechnologie: Hier werden neue Werkstoffe und Materialien entwickelt, einzelne Nanopartikel oder Molek{\"u}le und deren Wechselwirkung untersucht oder Schichtstrukturen im Nanometerbereich aufgebaut, die neue und vorher nicht bekannte Eigenschaften hervorbringen. Vor diesem Hintergrund b{\"u}ndelt das im Jahre 2006 gegr{\"u}ndete INB die an der FH Aachen vorhandenen Kompetenzen von derzeit insgesamt sieben Laboratorien auf den Gebieten der Halbleitertechnik und Nanoelektronik, Nanostrukturen und DNA-Sensorik, der Chemo- und Biosensorik, der Enzymtechnologie, der Mikrobiologie und Pflanzenbiotechnologie, der Zellkulturtechnik, sowie der Roten Biotechnologie synergetisch. In der Nano- und Biotechnologie steckt außergew{\"o}hnliches Potenzial! Nicht zuletzt deshalb stellen sich die Forscher der Herausforderung, in diesem Bereich gemeinsam zu forschen und Schnittstellen zu nutzen, um so bei der Gestaltung neuartiger Ideen und Produkte mitzuwirken, die zuk{\"u}nftig unser allt{\"a}gliches Leben ver{\"a}ndern werden. Im Folgenden werden die verschiedenen Forschungsbereiche kurz zusammenfassend vorgestellt und vorhandene Interaktionen anhand von exemplarisch ausgew{\"a}hlten, aktuellen Forschungsprojekten skizziert.},
  language  = {de}
}
@article{TippkoetterDuweWiesenetal.2014,
  author    = {Tippk{\"o}tter, Nils and Duwe, Anna-Maria and Wiesen, Sebastian and Sieker, Tim and Ulber, Roland},
  title     = {Enzymatic hydrolysis of beech wood lignocellulose at high solid contents and its utilization as substrate for the production of biobutanol and dicarboxylic acids},
  series = {Bioresource Technology},
  volume    = {167},
  journal   = {Bioresource Technology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.biortech.2014.06.052},
  pages     = {447 -- 455},
  year      = {2014},
  abstract  = {The development of a cost-effective hydrolysis for crude cellulose is an essential part of biorefinery developments. To establish such high solid hydrolysis, a new solid state reactor with static mixing is used. However, concentrations >10\% (w/w) cause a rate and yield reduction of enzymatic hydrolysis. By optimizing the synergetic activity of cellulolytic enzymes at solid concentrations of 9\%, 17\% and 23\% (w/w) of crude Organosolv cellulose, glucose concentrations of 57, 113 and 152 g L⁻¹ are reached. However, the glucose yield decreases from 0.81 to 0.72gg⁻¹ at 17\% (w/w). Optimal conditions for hydrolysis scale-up under minimal enzyme addition are identified. As result, at 23\% (w/w) crude cellulose the glucose yield increases from 0.29 to 0.49gg⁻¹. As proof of its applicability, biobutanol, succinic and itaconic acid are produced with the crude hydrolysate. The potential of the substrate is proven e.g. by a high butanol yield of 0.33gg⁻¹.},
  language  = {en}
}
@article{TippkoetterWollnySucketal.2014,
  author    = {Tippk{\"o}tter, Nils and Wollny, Steffen and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Recycling of spent oil bleaching earth as source of glycerol for the anaerobic production of acetone, butanol, and ethanol with Clostridium diolis and lipolytic Clostridium lundense},
  series = {Engineering in Life Sciences},
  volume    = {14},
  journal   = {Engineering in Life Sciences},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1618-2863},
  doi       = {10.1002/elsc.201300113},
  pages     = {425 -- 432},
  year      = {2014},
  abstract  = {A major part of edible oil is subjected to bleaching procedures, primarily with minerals applied as adsorbers. Their recycling is currently done either by regaining the oil via organic solvent extraction or by using the spent bleaching earth (SBE) as additive for animal feed, etc. As a new method, the reutilization of the by-product SBE for the microbiologic formation of acetone, butanol, and ethanol (ABE) is presented as proof-of-concept. The SBE was taken from a palm oil cleaning process. The recycling concept is based on the application of lipolytic clostridia strains. Due to considerably long fermentation times, co-fermentation with Candida rugosa and enzymatic hydrolyses of the bound oil with a subsequent clostridia fermentation are shown as alternative routes. Anaerobic fermentations under comparison of different clostridia strains were performed with glycerol media, enzymatically hydrolyzed palm oil and SBE. Solutes, side product compositions and productivities were quantified via HPLC. A successful production of ABE solutes from SBE has been done with a yield of 0.15 g butanol per gram of bound glycerol. Thus, the biotechnological recycling of the waste stream is possible in principle. Inhibition of the substrate suspension has been observed. A chromatographic ion-exchange of substrates increased the biomass concentration.},
  language  = {en}
}
@inproceedings{WulfhorstMerseburgTippkoetter2015,
  author    = {Wulfhorst, Helene and Merseburg, Johannes and Tippk{\"o}tter, Nils},
  title     = {Analyse von Lignocellulose mittels dynamischer Differenzkalorimetrie und Infrarot - Spektrometrie},
  series = {12. Dresdner Sensor-Symposium 2015 2015-12-07 - 2015-12-09},
  booktitle = {12. Dresdner Sensor-Symposium 2015 2015-12-07 - 2015-12-09},
  isbn      = {978-3-9813484-9-1},
  doi       = {10.5162/12dss2015/P6.2},
  pages     = {210 -- 215},
  year      = {2015},
  language  = {de}
}
@article{BaeckerDellePoghossianetal.2011,
  author    = {B{\"a}cker, Matthias and Delle, L. and Poghossian, Arshak and Biselli, Manfred and Zang, Werner and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Electrochemical sensor array for bioprocess monitoring},
  series = {Electrochimica Acta (2011)},
  volume    = {56},
  journal   = {Electrochimica Acta (2011)},
  number    = {26},
  publisher = {Elsevier},
  address   = {Amsterdam},
  pages     = {9673 -- 9678},
  year      = {2011},
  language  = {en}
}
@article{BaeckerRaueSchusseretal.2012,
  author    = {B{\"a}cker, Matthias and Raue, Markus and Schusser, Sebastian and Jeitner, C. and Breuer, L. and Wagner, P. and Poghossian, Arshak and F{\"o}rster, Arnold and Mang, Thomas and Sch{\"o}ning, Michael Josef},
  title     = {Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films},
  series = {Physica Status Solidi (a)},
  volume    = {209},
  journal   = {Physica Status Solidi (a)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201100763},
  pages     = {839 -- 845},
  year      = {2012},
  abstract  = {Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3-12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.},
  language  = {en}
}
@incollection{DuongSeifarthTemizArtmannetal.2018,
  author    = {Duong, Minh Tuan and Seifarth, Volker and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Staat, Manfred},
  title     = {Growth Modelling Promoting Mechanical Stimulation of Smooth Muscle Cells of Porcine Tubular Organs in a Fibrin-PVDF Scaffold},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_9},
  pages     = {209 -- 232},
  year      = {2018},
  abstract  = {Reconstructive surgery and tissue replacements like ureters or bladders reconstruction have been recently studied, taking into account growth and remodelling of cells since living cells are capable of growing, adapting, remodelling or degrading and restoring in order to deform and respond to stimuli. Hence, shapes of ureters or bladders and their microstructure change during growth and these changes strongly depend on external stimuli such as training. We present the mechanical stimulation of smooth muscle cells in a tubular fibrin-PVDFA scaffold and the modelling of the growth of tissue by stimuli. To this end, mechanotransduction was performed with a kyphoplasty balloon catheter that was guided through the lumen of the tubular structure. The bursting pressure was examined to compare the stability of the incubated tissue constructs. The results showed the significant changes on tissues with training by increasing the burst pressure as a characteristic mechanical property and the smooth muscle cells were more oriented with uniformly higher density. Besides, the computational growth models also exhibited the accurate tendencies of growth of the cells under different external stimuli. Such models may lead to design standards for the better layered tissue structure in reconstructing of tubular organs characterized as composite materials such as intestines, ureters and arteries.},
  language  = {en}
}
@article{WagnerBegingRotteretal.2007,
  author    = {Wagner, Torsten and Beging, Stefan and Rotter, L. and Poghossian, Arshak and Biselli, Manfred and Zang, Werner and Sch{\"o}ning, Michael Josef},
  title     = {Online-Messsysteme f{\"u}r die automatisierte Charakterisierung von feldeffektbasierten Biosensoren},
  series = {8. Dresdner Sensor-Symposium : Sensoren f{\"u}r Umwelt, Klima und Sicherheit, Biosensoren und Biosysteme, Sensoren und Sensorsysteme f{\"u}r die Prozesstechnik, Trends in der Sensortechnik, Materialentwicklung f{\"u}r die Sensorik; 8. Dresdner Sensor-Symposium, 10. - 12. Dezember 2007, Dresden / Gerald Gerlach ... (Hg.)},
  journal   = {8. Dresdner Sensor-Symposium : Sensoren f{\"u}r Umwelt, Klima und Sicherheit, Biosensoren und Biosysteme, Sensoren und Sensorsysteme f{\"u}r die Prozesstechnik, Trends in der Sensortechnik, Materialentwicklung f{\"u}r die Sensorik; 8. Dresdner Sensor-Symposium, 10. - 12. Dezember 2007, Dresden / Gerald Gerlach ... (Hg.)},
  publisher = {TUDpress, Verl. der Wissenschaften},
  address   = {Dresden},
  isbn      = {978-3-940046-45-1},
  pages     = {257 -- 260},
  year      = {2007},
  language  = {de}
}
@misc{AlKaidyTippkoetterUlber2014,
  author    = {Al-Kaidy, Huschyar and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Vorrichtung und Verfahren zur Bestimmung des Kontaktwinkels eines fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rpers [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {13 Seiten},
  year      = {2014},
  abstract  = {Die vorliegende Erfindung betrifft eine Vorrichtung und ein Verfahren zur Bestimmung des Kontaktwinkels eines fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rpers. Dieser besteht aus einem Tr{\"a}ger (1) und einer damit verbundenen, in einem Winkelbereich von mehr als 0° bis maximal 90° neigbaren Ebene (8) mit einer darin ausgebildeten Abrollbahn (9) f{\"u}r den fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rper. An der Ebene (8) sind mehrere Sensoren (11, 12) zur Erfassung der Rolldauer des K{\"o}rpers entlang der Rollstrecke angeordnet. Erfindungsgem{\"a}ß ist vorgesehen, dass die Einstellung des Neigungswinkels der Ebene (8) {\"u}ber ein Winkelmessger{\"a}t (10) erfolgt, wodurch ein Abrollwinkel erfassbar ist, bei dem der K{\"o}rper in Bewegung ger{\"a}t. Aus der Rolldauer, der Rollstrecke und dem Abrollwinkel wird der Kontaktwinkel des K{\"o}rpers ermittelt.},
  language  = {de}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Aufarbeitung von Polyphenolen aus Weizen mittels Zeolithen am Beispiel der Ferulas{\"a}ure},
  series = {Chemie IngenieurTechnik},
  volume    = {87},
  journal   = {Chemie IngenieurTechnik},
  number    = {1-2},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201400031},
  pages     = {128 -- 136},
  year      = {2015},
  abstract  = {Aufarbeitung von Polyphenolen aus Weizenmittels Zeolithen am Beispiel der Ferulasa¨ ureAlexander Thiel1, Kai Muffler1, Nils Tippko¨ tter1, Kirstin Suck2, Ulrich Sohling2, Friedrich Ruf3und Roland Ulber1,*DOI: 10.1002/cite.201400031Bei der Ferulasa¨ure handelt es sich um einen Wertstoff, der aus Weizen gewonnen und in der Lebensmittel- und Pharma-industrie eingesetzt werden kann. Der Einsatz von Weizen als nachwachsende Rohstoffquelle ist allerdings nur dann wirt-schaftlich durchfu¨hrbar, wenn eine Prozessintegration in die bestehenden industriellen Verfahren gewa¨hrleistet oder einedirekte Konkurrenz zur Mehl- und Sta¨rkeindustrie vermieden werden kann. In diesem Artikel wird ein Verfahren aufge-zeigt, welches hohe Ausbeuten ermo¨glicht und eine Konkurrenz zu bestehenden Verwertungspfaden vermeidet.},
  language  = {de}
}
@article{AlKaidyDuweHusteretal.2015,
  author    = {Al-Kaidy, Huschyar and Duwe, Anna and Huster, Manuel and Muffler, Kai and Schlegel, Christin and Tim, Sieker and Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Biotechnology and bioprocess engineering - from the first ullmann's article to recent trends},
  series = {ChemBioEng Reviews},
  volume    = {2},
  journal   = {ChemBioEng Reviews},
  number    = {3},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cben.201500008},
  pages     = {175 -- 184},
  year      = {2015},
  abstract  = {For several thousand years, biotechnology and its associated technical processes have had a great impact on the development of mankind. Based on empirical methods, in particular for the production of foodstuffs and daily commodities, these disciplines have become one of the most innovative future issues. Due to the increasing detailed understanding of cellular processes, production strains can now be optimized. In combination with modern bioprocesses, a variety of bulk and fine chemicals as well as pharmaceuticals can be produced efficiently. In this article, some of the current trends in biotechnology are discussed.},
  language  = {en}
}
@article{PothMonzonTippkoetteretal.2011,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery: Process integration of hydrolysis and fermentation (SSF process)},
  series = {Holzforschung},
  volume    = {65},
  journal   = {Holzforschung},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  pages     = {633 -- 637},
  year      = {2011},
  abstract  = {The aim of the present work is the process integration and the optimization of the enzymatic hydrolysis of wood and the following fermentation of the products to ethanol. The substrate is a fiber fraction obtained by organosolv pre-treatment of beech wood. For the ethanol production, a co-fermentation by two different yeasts (Saccharomyces cerevisiae and Pachysolen tannophilus) was carried out to convert glucose as well as xylose. Two approaches has been followed: 1. A two step process, in which the hydrolysis of the fiber fraction and the fermentation to product are separated from each other. 2. A process, in which the hydrolysis and the fermentation are carried out in one single process step as simultaneous saccharification and fermentation (SSF). Following the first approach, a yield of about 0.15 g ethanol per gram substrate can be reached. Based on the SSF, one process step can be saved, and additionally, the gained yield can be raised up to 0.3 g ethanol per gram substrate.},
  language  = {en}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@inproceedings{TippkoetterMoehringMaureretal.2013,
  author    = {Tippk{\"o}tter, Nils and M{\"o}hring, S. and Maurer, S. and Roth, J.},
  title     = {Dezentrale Vorbehandlung und Verarbeitung pflanzlicher Reststoffe f{\"u}r Bioraffinerien},
  series = {Kurzfassungen der Vortr{\"a}ge nach Sessions : Fr{\"u}hjahrstagung der Biotechnologen 2013, 4. - 5. M{\"a}rz 2013, Dechema-Haus, Frankfurt am Main},
  booktitle = {Kurzfassungen der Vortr{\"a}ge nach Sessions : Fr{\"u}hjahrstagung der Biotechnologen 2013, 4. - 5. M{\"a}rz 2013, Dechema-Haus, Frankfurt am Main},
  address   = {Frankfurt am Main},
  pages     = {5},
  year      = {2013},
  language  = {de}
}
@inproceedings{Tippkoetter2013,
  author    = {Tippk{\"o}tter, Nils},
  title     = {Biotechnologische Gewinnung von Wertstoffen aus Molke : BiobasedWorld - Innovation in food},
  series = {Biotechnica 2013 : European biotechnology science \& industry news},
  volume    = {12},
  booktitle = {Biotechnica 2013 : European biotechnology science \& industry news},
  number    = {9, special},
  pages     = {33 -- 50},
  year      = {2013},
  language  = {de}
}
@article{GerigkBujnickiGanpoNkwenkwaetal.2002,
  author    = {Gerigk, M. and Bujnicki, R. and Ganpo-Nkwenkwa, E. and Bongaerts, Johannes and Sprenger, G. and Takors, Ralf},
  title     = {Process control for enhanced L-phenylalanine production using different recombinant Escherichia coli strains},
  series = {Biotechnology and bioengineering},
  volume    = {Vol. 80},
  journal   = {Biotechnology and bioengineering},
  number    = {Iss. 7},
  issn      = {1097-0290 (E-Journal); 0006-3592 (Print)},
  pages     = {746 -- 754},
  year      = {2002},
  language  = {en}
}
@article{BongaertsBovenbergKraemeretal.2002,
  author    = {Bongaerts, Johannes and Bovenberg, Roel and Kr{\"a}mer, Marco and M{\"u}ller, Ulrike and Raeven, Leon and Wubbolts, Marcel},
  title     = {Metabolic engineering to produce fine chemicals in Escherichia coli},
  series = {Chemie - Ingenieur - Technik (CIT)},
  volume    = {Vol. 74},
  journal   = {Chemie - Ingenieur - Technik (CIT)},
  number    = {Iss. 5},
  issn      = {1522-2640 (E-Journal); 0009-286X (Print)},
  pages     = {694},
  year      = {2002},
  language  = {en}
}
@article{GerigkMaassTakorsetal.2000,
  author    = {Gerigk, M. and Maaß, D. and Takors, Ralf and Kreutzer, A. and Wandrey, Christian and Bongaerts, Johannes and Wubbolts, Marcel},
  title     = {Fermentative Herstellung von L-Phenylalanin im Fed-Batch Verfahren mit E. coli unter Einbindung eines integrierten Aufarbeitungsverfahrens},
  series = {Chemie-Ingenieur-Technik (CIT)},
  volume    = {Vol. 72},
  journal   = {Chemie-Ingenieur-Technik (CIT)},
  number    = {Iss. 9},
  issn      = {1522-2640 (E-Journal); 0009-286X (Print)},
  pages     = {926 -- 927},
  year      = {2000},
  language  = {de}
}
@article{BongaertsZoschkeWeidneretal.1995,
  author    = {Bongaerts, Johannes and Zoschke, Sascha and Weidner, Uwe and Linden, Gottfried},
  title     = {Transcriptional regulation of the proton translocating NADH},
  series = {Molecular microbiology},
  volume    = {Vol. 16},
  journal   = {Molecular microbiology},
  number    = {Iss. 3},
  issn      = {1365-2958 (E-Journal); 0950-382x (Print)},
  pages     = {521 -- 534},
  year      = {1995},
  language  = {en}
}
@article{MonakhovaDiehl2021,
  author    = {Monakhova, Yulia and Diehl, Bernd W.K.},
  title     = {Novel approach of qNMR workflow by standardization using 2H integral: Application to any intrinsic calibration standard},
  series = {Talanta},
  volume    = {222},
  journal   = {Talanta},
  number    = {Article number: 121504},
  publisher = {Elsevier},
  isbn      = {0039-9140},
  doi       = {10.1016/j.talanta.2020.121504},
  year      = {2021},
  abstract  = {Quantitative nuclear magnetic resonance (qNMR) is routinely performed by the internal or external standardization. The manuscript describes a simple alternative to these common workflows by using NMR signal of another active nuclei of calibration compound. For example, for any arbitrary compound quantification by NMR can be based on the use of an indirect concentration referencing that relies on a solvent having both 1H and 2H signals. To perform high-quality quantification, the deuteration level of the utilized deuterated solvent has to be estimated. In this contribution the new method was applied to the determination of deuteration levels in different deuterated solvents (MeOD, ACN, CDCl3, acetone, benzene, DMSO-d6). Isopropanol-d6, which contains a defined number of deuterons and protons, was used for standardization. Validation characteristics (precision, accuracy, robustness) were calculated and the results showed that the method can be used in routine practice. Uncertainty budget was also evaluated. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and can be applied in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).},
  language  = {en}
}
@article{MonakhovaDiehl2022,
  author    = {Monakhova, Yulia and Diehl, Bernd W.K.},
  title     = {Multinuclear NMR screening of pharmaceuticals using standardization by 2H integral of a deuterated solvent},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {209},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 114530},
  publisher = {Elsevier},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2021.114530},
  year      = {2022},
  abstract  = {NMR standardization approach that uses the 2H integral of deuterated solvent for quantitative multinuclear analysis of pharmaceuticals is described. As a proof of principle, the existing NMR procedure for the analysis of heparin products according to US Pharmacopeia monograph is extended to the determination of Na+ and Cl- content in this matrix. Quantification is performed based on the ratio of a 23Na (35Cl) NMR integral and 2H NMR signal of deuterated solvent, D2O, acquired using the specific spectrometer hardware. As an alternative, the possibility of 133Cs standardization using the addition of Cs2CO3 stock solution is shown. Validation characteristics (linearity, repeatability, sensitivity) are evaluated. A holistic NMR profiling of heparin products can now also be used for the quantitative determination of inorganic compounds in a single analytical run using a single sample. In general, the new standardization methodology provides an appealing alternative for the NMR screening of inorganic and organic components in pharmaceutical products.},
  language  = {en}
}