@incollection{Kurz2019,
  author    = {Kurz, Melanie},
  title     = {Betrifft Design : von historischen Zukunftsperspektiven zu gegenw{\"a}rtigen Vergangenheitssehns{\"u}chten},
  series = {Positionen des Neuen : Zukunft im Design},
  booktitle = {Positionen des Neuen : Zukunft im Design},
  publisher = {avedition},
  address   = {Stuttgart},
  isbn      = {978-3-89986-301-7},
  pages     = {136 -- 144},
  year      = {2019},
  language  = {de}
}
@article{Fabo2007,
  author    = {Fabo, Sabine},
  title     = {Marti Guix{\´e} : Parasitisierung durch das Objekt als Fata Morgana der Funktion},
  series = {Kunstforum international},
  volume    = {2007},
  journal   = {Kunstforum international},
  number    = {185},
  isbn      = {0177-3674},
  pages     = {164},
  year      = {2007},
  language  = {de}
}
@misc{AlKaidyUlberTippkoetter2014,
  author    = {Al-Kaidy, H. and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Eine Plattform-Technologie f{\"u}r die automatisierte Reaktionsf{\"u}hrung in magnetisierbaren mikrofluidischen Tropfen},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201450424},
  pages     = {1419 -- 1420},
  year      = {2014},
  abstract  = {{\"U}blicherweise werden biotechnologische Reaktionssysteme im mikrofluidischen Maßstab in vorstrukturierten Bauteilen oder mit auf Wellplatten basierenden Robotersystemen realisiert. In dem hier vorgestellten System werden chemische oder biologische Reaktionen mit magnetischen Mikroreaktoren (MR) durchgef{\"u}hrt, bei denen hydrophobe magnetische Mikropartikel einen w{\"a}ssrigen Kern umschließen. Solche MR bieten eine gute Kontrolle der Reaktionsbedingungen, eine verbesserte Sicherheit und Portabilit{\"a}t. Die neue Plattformtechnologie erm{\"o}glicht die zweidimensionale Bewegung der magnetischen MR auf einer planaren Ebene. Oberhalb oder unterhalb der Plattform werden Magnetfeldgradienten zum Manipulieren und Bewegen eines oder mehrerer magnetischer MR erzeugt. Die optimal auf die MR wirkenden magnetischen Kr{\"a}fte werden experimentell ermittelt und simuliert. Die Aktivierung der Magnetfelder wird automatisiert durch elektrische Spulen mit Eisenkern bzw. Neodymmagnet gesteuert. Angewendet wurde das System beim reversiblen {\"O}ffnen von MR, um z. B. Reaktionspartner in den w{\"a}ssrigen Kern zu injizieren oder Proben zu entnehmen. Ferner wurde Lac-case A und b-Glucosidase auf einer Quarzglasoberfl{\"a}che immobilisiert und mit einem MR zum Reagieren gebracht. Weiterhin wurden MR fusioniert und so ein w{\"a}ssriger Kern bestehend aus Laccase mit einem aus dem entsprechenden Substrat Syringaldazin vereint.},
  language  = {de}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@article{EilmannRigling2012,
  author    = {Eilmann, Britta and Rigling, Andreas},
  title     = {Tree-growth analyses to estimate tree species' drought tolerance},
  series = {Tree Physiology},
  volume    = {32},
  journal   = {Tree Physiology},
  number    = {2},
  editor    = {Abrams, Marc},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {0829-318X (Print)},
  doi       = {10.1093/treephys/tps004},
  pages     = {178 -- 187},
  year      = {2012},
  abstract  = {Climate change is challenging forestry management and practices. Among other things, tree species with the ability to cope with more extreme climate conditions have to be identified. However, while environmental factors may severely limit tree growth or even cause tree death, assessing a tree species' potential for surviving future aggravated environmental conditions is rather demanding. The aim of this study was to find a tree-ring-based method suitable for identifying very drought-tolerant species, particularly potential substitute species for Scots pine (Pinus sylvestris L.) in Valais. In this inner-Alpine valley, Scots pine used to be the dominating species for dry forests, but today it suffers from high drought-induced mortality. We investigate the growth response of two native tree species, Scots pine and European larch (Larix decidua Mill.), and two non-native species, black pine (Pinus nigra Arnold) and Douglas fir (Pseudotsuga menziesii Mirb. var. menziesii), to drought. This involved analysing how the radial increment of these species responded to increasing water shortage (abandonment of irrigation) and to increasingly frequent drought years. Black pine and Douglas fir are able to cope with drought better than Scots pine and larch, as they show relatively high radial growth even after irrigation has been stopped and a plastic growth response to drought years. European larch does not seem to be able to cope with these dry conditions as it lacks the ability to recover from drought years. The analysis of trees' short-term response to extreme climate events seems to be the most promising and suitable method for detecting how tolerant a tree species is towards drought. However, combining all the methods used in this study provides a complete picture of how water shortage could limit species.},
  language  = {en}
}
@misc{RothkranzKrafftTippkoetter2022,
  author    = {Rothkranz, Berit and Krafft, Simone and Tippk{\"o}tter, Nils},
  title     = {Media optimization for sustainable fuel production: How to produce biohydrogen from renewable resources with Thermotoga neapolitana},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255305},
  pages     = {1298 -- 1299},
  year      = {2022},
  abstract  = {Hydrogen is playing an increasingly important role in research and politics as an energy carrier of the future. Since hydrogen has commonly been produced from methane by steam reforming, the need for climate-friendly, alternative production routes is emerging. In addition to electrolysis, fermentative routes for the production of so-called biohydrogen are "green" alternatives. The application of microorganisms offers the advantage of sustainable production from renewable resources using easily manageable technologies. In this project, the hyperthermophilic, anaerobic microorganism Thermotoga neapolitana is used for the productio nof biohydrogen from renewable resources. The enzymatically hydrolyzed resources were used in fermentation leading to yield coefficients of 1.8 mole H₂ per mole glucose when using hydrolyzed straw and ryegrass supplemented with medium, respectively. These results are similar to the hydrogen yields when using Thermotoga basal medium with glucose (TBGY) as control group. In order to minimize the supplementation of the hydrolysate and thus increase the economic efficiency of the process, the essential media components were identified. The experiments revealed NaCl, KCl, and glucose as essential components for cell growth as well as biohydrogen production. When excluding NaCl, a decrease of 96\% in hydrogen production occured.},
  language  = {en}
}
@misc{VarrialeKukaTippkoetteretal.2022,
  author    = {Varriale, Ludovica and Kuka, Katrin and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Use of a green biomass in a biorefinery platform},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255095},
  pages     = {1299},
  year      = {2022},
  abstract  = {The emerging environmental issues due to the use of fossil resources are encouraging the exploration of new renewable resources. Biomasses are attracting more interest due to the low environmental impacts, low costs, and high availability on earth. In this scenario, green biorefineries are a promising platform in which green biomasses are used as feedstock. Grasses are mainly composed of cellulose and hemicellulose, and lignin is available in a small amount. In this work, a perennial ryegrass was used as feedstock to develop a green bio-refinery platform. Firstly, the grass was mechanically pretreated, thus obtaining a press juice and a press cake fraction. The press juice has high nutritional values and can be employed as part of fermentation media. The press cake can be employed as a substrate either in enzymatic hydrolysis or in solid-state fermentation. The overall aim of this work was to demonstrate different applications of both the liquid and the solid fractions. For this purpose, the filamentous fungus A. niger and the yeast Y. lipolythica were selected for their ability to produce citric acid. Finally, the possibility was assessed to use the press juice as part of fermentation media to cultivate S. cerevisiae and lactic acid bacteria for ethanol and lactic acid fermentation.},
  language  = {en}
}
@book{KurzSchwer2022,
  author    = {Kurz, Melanie and Schwer, Thilo},
  title     = {Geschichte des Designs},
  edition   = {1. Auflage},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-78813-0},
  pages     = {128 Seiten},
  year      = {2022},
  abstract  = {Dieser Band bietet einen kompakten {\"U}berblick {\"u}ber die wichtigsten Stationen des Produktdesigns vom Beginn der Industrialisierung bis heute. Im Zentrum stehen ikonische Alltagsgegenst{\"a}nde vom Thonet-Stuhl bis zum iPhone. Anschaulich und kenntnisreich nehmen Melanie Kurz und Thilo Schwer dabei auch die gesellschaftspolitische Situation, in der die Objekte entstanden sind, in den Blick.},
  language  = {de}
}
@techreport{Tippkoetter2021,
  author    = {Tippk{\"o}tter, Nils},
  title     = {TreBec - Herstellung eines Mehrwegbechers aus Treber : Sachbericht zum Verwendungsnachweis},
  publisher = {FH Aachen},
  address   = {J{\"u}lich},
  doi       = {10.2314/KXP:1858723302},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {Laufzeit des Vorhabens und Berichtszeitraum: 01.10.2020-30.09.2021},
  language  = {de}
}
@incollection{Kurz2012,
  author    = {Kurz, Melanie},
  title     = {Prizing \& Pricing : Design zwischen Rang und Regal},
  series = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  booktitle = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien},
  publisher = {Transcript Verlag},
  address   = {Bielefeld},
  isbn      = {978-3-8376-2170-9},
  doi       = {10.1515/transcript.9783839421703.26},
  pages     = {26 -- 39},
  year      = {2012},
  language  = {de}
}
@incollection{EngelmannShashaSlabu2021,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Slabu, Ioana},
  title     = {Magnetic nanoparticle relaxation in biomedical application: focus on simulating nanoparticle heating},
  series = {Magnetic nanoparticles in human health and medicine},
  booktitle = {Magnetic nanoparticles in human health and medicine},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken, New Jeersey},
  isbn      = {978-1-119-75467-1},
  pages     = {327 -- 354},
  year      = {2021},
  language  = {en}
}
@misc{PothMonzonTippkoetteretal.2009,
  author    = {Poth, S. and Monzon, M. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Fermentation von Hydrolysaten aus Lignocellulose},
  series = {Chemie Ingenieur Technik},
  volume    = {81},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.200950243},
  pages     = {1220},
  year      = {2009},
  abstract  = {Die {\"o}konomische Abh{\"a}ngigkeit von fossilen Brennstoffen und der klimatische Wandel durch die Nutzung dieser haben zu einer intensiven Suche nach erneuerbaren Rohstoffen f{\"u}r die Produktion von Chemikalien und Treibstoffen gef{\"u}hrt. Ein viel versprechender Rohstoff in diesem Zusammenhang sind Zucker, die mittels enzymatischer Hydrolyse aus Lignocellulose gewonnen werden k{\"o}nnen. Die Fermentation erfolgt mit Cellulose- bzw. Hemicellulose-Fraktionen, welche durch thermo-chemische Vorbehandlung von Holz gewonnen und anschließend enzymatisch hydrolysiert werden. Die in den Hydrolysaten enthaltenen Zuckermonomere dienen als Kohlenstoffquelle f{\"u}r die Produktion von Ethanol. Da sowohl Glucose als auch Xylose in den unterschiedlichen Fraktionen enthalten sind, wird zur Umsetzung dieser eine Co-Fermentation zweier Hefen durchgef{\"u}hrt. Im Rahmen der Optimierung dieser Fermentationen werden neben der Erg{\"a}nzung der Hydrolysate durch notwendige Salze auch Verfahrenweisen wie Fed-Batch-Fermentationen untersucht. Ein weiterer interessanter Ansatz, welcher in diesem Rahmen gepr{\"u}ft wird, ist die enzymatische Hydrolyse der Lignocellulose-Fraktionen und die simultane Fermentation der dabei entstehenden Zucker in einem Schritt. Des Weiteren wurde die Eignung der Hydrolysate f{\"u}r die Biomasseproduktion anderer Mikroorganismen wie Escherichia coli getestet.},
  language  = {de}
}
@article{Biewendt2020,
  author    = {Biewendt, Marcel},
  title     = {Sustainable development: A quantitative analysis regarding the impact of resource rents on state welfare from 2002 to 2017},
  series = {SocioEconomic Challenges},
  volume    = {4},
  journal   = {SocioEconomic Challenges},
  number    = {4},
  publisher = {ARMG Publishing},
  address   = {Sumy},
  issn      = {2520-6214},
  doi       = {10.21272/sec.4(4).119-131.2020},
  pages     = {119 -- 131},
  year      = {2020},
  abstract  = {This paper uses a quantitative analysis to examine the interdependence and impact of resource rents on socio-economic development from 2002 to 2017. Nigeria and Norway have been chosen as reference countries due to their abundance of natural resources by similar economic performance, while the ranking in the Human Development Index differs dramatically. As the Human Development Index provides insight into a country's cultural and socio-economic characteristics and development in addition to economic indicators, it allows a comparison of the two countries. The hypothesis presented and discussed in this paper was researched before. A qualitative research approach was used in the author's master's thesis "The Human Development Index (HDI) as a Reflection of Resource Abundance (using Nigeria and Norway as a case study)" in 2018. The management of scarce resources is an important aspect in the development of modern countries and those on the threshold of becoming industrialised nations. The effects of a mistaken resource management are not only of a purely economic nature but also of a social and socio-economic nature. In order to present a partial aspect of these dependencies and influences this paper uses a quantitative analysis to examine the interdependence and impact of resource rents on socio-economic development from 2002 to 2017. Nigeria and Norway have been chosen as reference countries due to their abundance of natural resources by similar economic performance, while the ranking in the Human Development Index differs significantly. As the Human Development Index provides insight into a country's cultural and socio-economic characteristics and development in addition to economic indicators, it allows a comparison of the two countries. This paper found out in a holistic perspective that (not or poorly managed) resource wealth in itself has a negative impact on socio-economic development and significantly reduces the productivity of the citizens of a state. This is expressed in particular for the years 2002 till 2017 in a negative correlation of GDP per capita and HDI value with the share respectively the size of resources in the GDP of a country.},
  language  = {en}
}
@article{BronderJessingPoghossianetal.2018,
  author    = {Bronder, Thomas and Jessing, Max P. and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of PCR-Amplified Tuberculosis DNA Fragments with Polyelectrolyte-Modified Field-Effect Sensors},
  series = {Analytical Chemistry},
  volume    = {90},
  journal   = {Analytical Chemistry},
  number    = {12},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {0003-2700},
  doi       = {10.1021/acs.analchem.8b01807},
  pages     = {7747 -- 7753},
  year      = {2018},
  abstract  = {Field-effect-based electrolyte-insulator-semiconductor (EIS) sensors were modified with a bilayer of positively charged weak polyelectrolyte (poly(allylamine hydrochloride) (PAH)) and probe single-stranded DNA (ssDNA) and are used for the detection of complementary single-stranded target DNA (cDNA) in different test solutions. The sensing mechanism is based on the detection of the intrinsic molecular charge of target cDNA molecules after the hybridization event between cDNA and immobilized probe ssDNA. The test solutions contain synthetic cDNA oligonucleotides (with a sequence of tuberculosis mycobacteria genome) or PCR-amplified DNA (which origins from a template DNA strand that has been extracted from Mycobacterium avium paratuberculosis-spiked human sputum samples), respectively. Sensor responses up to 41 mV have been measured for the test solutions with DNA, while only small signals of ∼5 mV were detected for solutions without DNA. The lower detection limit of the EIS sensors was ∼0.3 nM, and the sensitivity was ∼7.2 mV/decade. Fluorescence experiments using SybrGreen I fluorescence dye support the electrochemical results.},
  language  = {en}
}
@misc{BurgethKleefeldNaegeletal.2020,
  author    = {Burgeth, Bernhard and Kleefeld, Andreas and Naegel, Beno{\^i}t and Perret, Benjamin},
  title     = {Editorial — Special Issue: ISMM 2019},
  series = {Mathematical Morphology - Theory and Applications},
  volume    = {4},
  journal   = {Mathematical Morphology - Theory and Applications},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Warschau},
  issn      = {2353-3390},
  doi       = {10.1515/mathm-2020-0200},
  pages     = {159 -- 161},
  year      = {2020},
  abstract  = {This editorial presents the Special Issue dedicated to the conference ISMM 2019 and summarizes the articles published in this Special Issue.},
  language  = {en}
}
@article{DitzhausGaigall2018,
  author    = {Ditzhaus, Marc and Gaigall, Daniel},
  title     = {A consistent goodness-of-fit test for huge dimensional and functional data},
  series = {Journal of Nonparametric Statistics},
  volume    = {30},
  journal   = {Journal of Nonparametric Statistics},
  number    = {4},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1029-0311},
  doi       = {10.1080/10485252.2018.1486402},
  pages     = {834 -- 859},
  year      = {2018},
  abstract  = {A nonparametric goodness-of-fit test for random variables with values in a separable Hilbert space is investigated. To verify the null hypothesis that the data come from a specific distribution, an integral type test based on a Cram{\´e}r-von-Mises statistic is suggested. The convergence in distribution of the test statistic under the null hypothesis is proved and the test's consistency is concluded. Moreover, properties under local alternatives are discussed. Applications are given for data of huge but finite dimension and for functional data in infinite dimensional spaces. A general approach enables the treatment of incomplete data. In simulation studies the test competes with alternative proposals.},
  language  = {en}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise - die Methoden},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  edition   = {54. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05531},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@book{WagemannTippkoetter2019,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries / Kurt Wagemann, Nils Tippk{\"o}tter (editors)},
  series = {Advances in biochemical engineering/biotechnology book series (ABE)},
  journal   = {Advances in biochemical engineering/biotechnology book series (ABE)},
  publisher = {Springer},
  address   = {Cham (Switzerland)},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/978-3-319-97119-3},
  pages     = {VI, 549 Seiten},
  year      = {2019},
  language  = {en}
}
@incollection{Fabo2017,
  author    = {Fabo, Sabine},
  title     = {Das Dokumentarische als offene Konstruktion},
  series = {Doris Frohnapfel, Documentary derivative},
  booktitle = {Doris Frohnapfel, Documentary derivative},
  publisher = {Totalverlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-942040-03-7},
  pages     = {5 -- 23},
  year      = {2017},
  language  = {de}
}
@misc{TippkoetterDuweRaisetal.2014,
  author    = {Tippk{\"o}tter, Nils and Duwe, Anna and Rais, Dominik and Zibek, Susanne and Zorn, H.},
  title     = {Optimierung und Scale-up der enzymatischen Hydrolyse inkl. Ligninabbau},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201450287},
  pages     = {1515},
  year      = {2014},
  abstract  = {Prim{\"a}re Ziele der Hydrolyse pflanzlicher nachwachsender Rohstoffe sind m{\"o}glichst hohe Zuckerkonzentrationen f{\"u}r nachfolgende Fermentationen und eine Maximierung der Produktivit{\"a}t. Zur Optimierung dieser Prozesse wird Organosolv-aufgeschlossene Buchenholz-Cellulose verwendet. Die Hydrolyse des Faserstoffes erfolgt mithilfe von Novozymes CTec2-Enzymen. Die Hydrolysen konnten durch neue R{\"u}hrerelemente auf einen Maßstab von 1000 L {\"u}bertragen werden. Dabei konnten maximale Ausbeuten (g Glucose g -1 Glucose im Faserstoff) bis 81 g g - 1 und Konzentrationen von 152 g L -1 erreicht werden. Zurzeit k{\"o}nnen unter Einsatz eines Feststoffreaktors Cellulosefasern in einer Konzentration bis 400 g L -1 enzymatisch hydrolysiert werden. Die cellulolytischen Enzyme stoßen bei hohen Feststoffkonzentrationen an ihre Grenzen. Mit steigendem Feststoffgehalt nimmt die Hydrolyseausbeute ab. Ein Ansatz zur Steigerung der Effizienz ist der Einsatz ligninolytischer Enzyme, die Ligninreste an der Organosolv-Cellulose aufschließen k{\"o}nnen. Eine solche Verbesserung der Zug{\"a}nglichkeit f{\"u}r cellulolytische Enzyme an ihr Substrat wurde durch Kultur{\"u}berst{\"a}nde verschiedener ligninolytischer Pilze erreicht. Mit Kultur{\"u}berst{\"a}nden von Stereum sp. sind Steigerungen der Glucoseausbeuten um bis zu 30 \% m{\"o}glich.},
  language  = {de}
}
@article{GraesslRenzHezeletal.2013,
  author    = {Gr{\"a}ßl, Andreas and Renz, Wolfgang and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and {\"O}zerdem, Celal and Rieger, Jan and Kellmann, Peter and Santoro, Davide and Lindel, Tomasz D. and Frauenrath, Tobias and Pfeiffer, Harald and Niendorf, Thoralf},
  title     = {Modular 32-channel transceiver coil array for cardiac MRI at 7.0T},
  series = {Magnetic Resonance in Medicine},
  volume    = {72},
  journal   = {Magnetic Resonance in Medicine},
  number    = {1},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24903},
  pages     = {276 -- 290},
  year      = {2013},
  abstract  = {Purpose To design and evaluate a modular transceiver coil array with 32 independent channels for cardiac MRI at 7.0T. Methods The modular coil array comprises eight independent building blocks, each containing four transceiver loop elements. Numerical simulations were used for B1+ field homogenization and radiofrequency (RF) safety validation. RF characteristics were examined in a phantom study. The array's suitability for accelerated high spatial resolution two-dimensional (2D) FLASH CINE imaging of the heart was examined in a volunteer study. Results Transmission field adjustments and RF characteristics were found to be suitable for the volunteer study. The signal-to-noise intrinsic to 7.0T together with the coil performance afforded a spatial resolution of 1.1 × 1.1 × 2.5 mm3 for 2D CINE FLASH MRI, which is by a factor of 6 superior to standardized CINE protocols used in clinical practice at 1.5T. The 32-channel transceiver array supports one-dimensional acceleration factors of up to R = 4 without impairing image quality significantly. Conclusion The modular 32-channel transceiver cardiac array supports accelerated and high spatial resolution cardiac MRI. The array is compatible with multichannel transmission and provides a technological basis for future clinical assessment of parallel transmission techniques at 7.0T.},
  language  = {en}
}
@article{HoffmannUhlCeblinetal.2022,
  author    = {Hoffmann, Andreas and Uhl, Matthias and Ceblin, Maximilian and Rohrbach, Felix and Bansmann, Joachim and Mallah, Marcel and Heuermann, Holger and Jacob, Timo and Kuehne, Alexander J.C.},
  title     = {Atmospheric pressure plasma-jet treatment of PAN-nonwovens—carbonization of nanofiber electrodes},
  series = {C - Journal of Carbon Research},
  volume    = {8},
  journal   = {C - Journal of Carbon Research},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2311-5629},
  doi       = {10.3390/c8030033},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Carbon nanofibers are produced from dielectric polymer precursors such as polyacrylonitrile (PAN). Carbonized nanofiber nonwovens show high surface area and good electrical conductivity, rendering these fiber materials interesting for application as electrodes in batteries, fuel cells, and supercapacitors. However, thermal processing is slow and costly, which is why new processing techniques have been explored for carbon fiber tows. Alternatives for the conversion of PAN-precursors into carbon fiber nonwovens are scarce. Here, we utilize an atmospheric pressure plasma jet to conduct carbonization of stabilized PAN nanofiber nonwovens. We explore the influence of various processing parameters on the conductivity and degree of carbonization of the converted nanofiber material. The precursor fibers are converted by plasma-jet treatment to carbon fiber nonwovens within seconds, by which they develop a rough surface making subsequent surface activation processes obsolete. The resulting carbon nanofiber nonwovens are applied as supercapacitor electrodes and examined by cyclic voltammetry and impedance spectroscopy. Nonwovens that are carbonized within 60 s show capacitances of up to 5 F g⁻¹.},
  language  = {en}
}
@misc{Huening2024,
  author    = {H{\"u}ning, Felix},
  title     = {Positionssensorvorrichtung},
  year      = {2024},
  abstract  = {Die Erfindung betrifft eine Positionssensorvorrichtung zur Bestimmung einer Absolutposition eines beweglichen ersten Teils relativ zu einem ortsfesten zweiten Teil mit einem mit dem beweglichen ersten Teil gekoppelter Codek{\"o}rper, der dazu eingerichtet ist, eine Codespur mit einer Mehrzahl von in Spurrichtung aufeinanderfolgenden Codeelementen zu enthalten zur Bildung eines Codewortes, mit einer magnetischen Detektionseinrichtung zur Detektion der Codespur, wobei die Detektionseinrichtung zum einen an dem Codek{\"o}rper befestigte und entlang der Spurrichtung in einem solchen Abstand gegenpolig zueinander angeordnete Permanentmagneten aufweist, dass der Abstand mit einer vorgegebenen L{\"a}nge der jeweiligen Codeelemente {\"u}bereinstimmt, und zum anderen eine Anzahl von ortsfest und quer zu dem Codek{\"o}rper versetzt angeordnete Wiegandsensoren aufweist, wobei der Abstand des Wiegandsensors zu einer Erstreckungsebene der Permanentmagneten derart gew{\"a}hlt ist, dass bei {\"U}berdeckung des Wiegandsensors durch den Permanentmagneten ein Wiegandpuls in dem Wiegandsensor induziert wird.},
  language  = {de}
}
@techreport{PisarczykRitzWallenborn2014,
  author    = {Pisarczyk, Rafael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Unterschiedliche Entwicklungsans{\"a}tze von Multiplattform-Anwendungen : Markt{\"u}bersicht},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {15 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Die Markt{\"u}bersicht „Unterschiedliche Entwicklungsans{\"a}tze von Multiplattform-Anwendungen" richtet sich an IT-Dienstleister, Entwickler und IT-Abteilungen von Unternehmen, die Multiplattform Anwendungen entwickeln. In dieser Markt{\"u}bersicht werden verschiedene Entwicklungsans{\"a}tze beschrieben und ihre jeweiligen Vor- und Nachteile aufgezeigt.},
  language  = {de}
}
@article{BerndtKlostermeyerZahn1972,
  author    = {Berndt, Heinz and Klostermeyer, Henning and Zahn, Helmut},
  title     = {Zur Synthese monomerer cyclischer Cystinpeptidderivate, I : Synthese der Sequenz A 6-9 des Schafinsulins als Cyclocystinylderivat},
  series = {Justus Liebigs Annalen der Chemie},
  volume    = {759},
  journal   = {Justus Liebigs Annalen der Chemie},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0690},
  doi       = {10.1002/jlac.19727590109},
  pages     = {114 -- 120},
  year      = {1972},
  abstract  = {Es wird die Synthese der Sequenz A 6-9 des Schafinsulins in der gesch{\"u}tzten Form Boc-Cys-Cys-Ala-Gly-OBuᵗ (5) sowie das Verhalten dieses monomeren cyclischen Cystinpeptidderivates gegen{\"u}ber den in der Peptidchemie gebr{\"a}uchlichen Reagenzien Bortrifluorid/Eisessig, Tri{\"a}thylamin und Hydrazinhydrat beschrieben.},
  language  = {de}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {88},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {8},
  issn      = {0940-483X},
  pages     = {707 -- 710},
  year      = {1984},
  language  = {en}
}
@inproceedings{KuperjansAugenstein2001,
  author    = {Kuperjans, Isabel and Augenstein, Eckardt},
  title     = {„EUSEBIA - Software zur Analyse und Verbesserung der betrieblichen Energiewirtschaft},
  series = {Optimierung in der Energieversorgung : Tagung Veitsh{\"o}chheim, 9. und 10. Oktober 2001. - (VDI-Berichte ; 1627)},
  booktitle = {Optimierung in der Energieversorgung : Tagung Veitsh{\"o}chheim, 9. und 10. Oktober 2001. - (VDI-Berichte ; 1627)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091627-3},
  pages     = {267 -- 268},
  year      = {2001},
  language  = {de}
}
@book{Berndt2014,
  author    = {Berndt, Heinz},
  title     = {Neue Kondensations-Methoden zur Synthese definierter Peptid-Derivate},
  address   = {Aachen},
  pages     = {XII, VI, 207 S. : graph. Darst.},
  year      = {2014},
  language  = {de}
}
@inproceedings{KramerBragardRitzetal.2024,
  author    = {Kramer, Pia and Bragard, Michael and Ritz, Thomas and Ferfer, Ute and Schiffers, Tim},
  title     = {Visualizing, Enhancing and Predicting Students' Success through ECTS Monitoring},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578652},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper serves as an introduction to the ECTS monitoring system and its potential applications in higher education. It also emphasizes the potential for ECTS monitoring to become a proactive system, supporting students by predicting academic success and identifying groups of potential dropouts for tailored support services. The use of the nearest neighbor analysis is suggested for improving data analysis and prediction accuracy.},
  language  = {en}
}
@misc{RossJonesTeumerCapitainetal.2018,
  author    = {Ross-Jones, J. and Teumer, T. and Capitain, C. and Tippk{\"o}tter, Nils and Krause, M. J. and Methner, F.-J. and R{\"a}dle, M.},
  title     = {Analytical methods for in-line characterization of beer haze},
  series = {Trends in Brewing},
  journal   = {Trends in Brewing},
  year      = {2018},
  abstract  = {In most beers, producers strive to minimize haze to maximize visual appeal. To detect the formation of particulates, a measurement system for sub-micron particles is required. Beer haze is naturally occurring, composed of protein or polyphenol particles; in their early stage of growth their size is smaller than 2 µm. Microscopy analysis is time and resource intensive; alternatively, backscattering is an inexpensive option for detecting particle sizes of interest.},
  language  = {en}
}
@misc{FrauenrathDieringerPateletal.2011,
  author    = {Frauenrath, Tobias and Dieringer, Matthias and Patel, Nishant and Zerdem, Celal and Hentschel, Jan and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {From Artifact to Merit: Cardiac Gated MRI at 7T \& 3T using Magneto-Hydrodynamic Effects for Synchronization},
  series = {2011 ISMRM Annual Meeting Proceedings},
  journal   = {2011 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2011},
  abstract  = {ECG is corrupted by magneto-hydrodynamic effects at higher magnetic field strength. Artifacts in the ECG trace and severe T-wave elevation might be mis-interpreted as R-waves. MHD being inherently sensitive to blood flow and blood velocity provides an alternative approach for cardiac gating, even in peripheral target areas far away from the commonly used upper torso positions of ECG electrodes. This feature would be very beneficial to address traveling time induced motion artifacts and trigger latency related issues raised by ECG-gated peripheral MR angiography. For all those reasons, this work proposes the use of MHD-trigger for cardiac gated MR.},
  language  = {en}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in commercial vehicle powertrains},
  series = {ATZautotechnology},
  volume    = {2010},
  journal   = {ATZautotechnology},
  number    = {10},
  publisher = {Vieweg \& Sohn},
  address   = {Wiesbaden},
  issn      = {2192-886X},
  doi       = {10.1007/BF03247185},
  pages     = {26 -- 31},
  year      = {2010},
  abstract  = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.},
  language  = {en}
}
@incollection{Finkenberger2018,
  author    = {Finkenberger, Isabel Maria},
  title     = {Die Stadt als st{\"a}dtisch-theatrale Versuchsanordnung: Wie wollen wir in Zukunft leben und welche Stadt brauchen wir daf{\"u}r?},
  series = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen},
  booktitle = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen},
  publisher = {transcript},
  address   = {Bielefeld},
  isbn      = {9783839443323},
  doi       = {https://doi.org/10.1515/9783839443323-009},
  pages     = {86 -- 95},
  year      = {2018},
  language  = {de}
}
@incollection{OezdilBerndtHoecker1991,
  author    = {{\"O}zdil, S. and Berndt, Heinz and H{\"o}cker, Hartwig},
  title     = {Systematische Erfassung der Best{\"a}ndigkeit von Ryton-, P84- und Dralon ATF 1063-Fasern unter Einwirkung verschiedener NOx-Konzentrationen in einem definierten Temperaturintervall},
  series = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  booktitle = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  number    = {107},
  publisher = {Dt. Wollforschungsinstitut},
  address   = {Aachen},
  issn      = {0930-3723},
  pages     = {89 -- 129},
  year      = {1991},
  language  = {de}
}
@inproceedings{HerrmannKellyPrice2002,
  author    = {Herrmann, Ulf and Kelly, Bruce and Price, Henry},
  title     = {Two Tank Molten Salt Storage for Parabolic Trough Solar Power Plants},
  series = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  booktitle = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  editor    = {Steinfeld, Aldo},
  publisher = {Paul Scherrer Inst.},
  address   = {Villingen},
  isbn      = {3-9521409-3-7},
  pages     = {517 -- 524},
  year      = {2002},
  language  = {en}
}
@inproceedings{SchnabelBerndt1973,
  author    = {Schnabel, Eberhard and Berndt, Heinz},
  title     = {Zur selektive Abspaltbarkeit der t-Butyloxycarbonylgruppe},
  series = {Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971},
  booktitle = {Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971},
  editor    = {Nesvadba, H.},
  publisher = {North-Holland Publ. [u.a.]},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-7204-4120-X},
  pages     = {69 -- 70},
  year      = {1973},
  language  = {en}
}
@article{GenzKingWahle1992,
  author    = {Genz, M. and King, H. and Wahle, Michael},
  title     = {Mikrozellige Polyurethan-Elastomere als Federelement in Automobilanwendungen},
  series = {Automobiltechnische Zeitschrift ; ATZ},
  volume    = {94},
  journal   = {Automobiltechnische Zeitschrift ; ATZ},
  number    = {10},
  issn      = {0001-2785},
  pages     = {512 -- 520},
  year      = {1992},
  language  = {de}
}
@article{MuellerSeginWeigandetal.2022,
  author    = {Mueller, Tobias and Segin, Alexander and Weigand, Christoph and Schmitt, Robert H.},
  title     = {Feature selection for measurement models},
  series = {International journal of quality \& reliability management},
  journal   = {International journal of quality \& reliability management},
  number    = {Vol. ahead-of-print, No. ahead-of-print.},
  publisher = {Emerald Group Publishing Limited},
  address   = {Bingley},
  issn      = {0265-671X},
  doi       = {10.1108/IJQRM-07-2021-0245},
  year      = {2022},
  abstract  = {Purpose In the determination of the measurement uncertainty, the GUM procedure requires the building of a measurement model that establishes a functional relationship between the measurand and all influencing quantities. Since the effort of modelling as well as quantifying the measurement uncertainties depend on the number of influencing quantities considered, the aim of this study is to determine relevant influencing quantities and to remove irrelevant ones from the dataset. Design/methodology/approach In this work, it was investigated whether the effort of modelling for the determination of measurement uncertainty can be reduced by the use of feature selection (FS) methods. For this purpose, 9 different FS methods were tested on 16 artificial test datasets, whose properties (number of data points, number of features, complexity, features with low influence and redundant features) were varied via a design of experiments. Findings Based on a success metric, the stability, universality and complexity of the method, two FS methods could be identified that reliably identify relevant and irrelevant influencing quantities for a measurement model. Originality/value For the first time, FS methods were applied to datasets with properties of classical measurement processes. The simulation-based results serve as a basis for further research in the field of FS for measurement models. The identified algorithms will be applied to real measurement processes in the future.},
  language  = {en}
}
@article{GaigallGerstenbergTrinh2022,
  author    = {Gaigall, Daniel and Gerstenberg, Julian and Trinh, Thi Thu Ha},
  title     = {Empirical process of concomitants for partly categorial data and applications in statistics},
  series = {Bernoulli},
  volume    = {28},
  journal   = {Bernoulli},
  number    = {2},
  publisher = {International Statistical Institute},
  address   = {Den Haag, NL},
  issn      = {1573-9759},
  doi       = {10.3150/21-BEJ1367},
  pages     = {803 -- 829},
  year      = {2022},
  abstract  = {On the basis of independent and identically distributed bivariate random vectors, where the components are categorial and continuous variables, respectively, the related concomitants, also called induced order statistic, are considered. The main theoretical result is a functional central limit theorem for the empirical process of the concomitants in a triangular array setting. A natural application is hypothesis testing. An independence test and a two-sample test are investigated in detail. The fairly general setting enables limit results under local alternatives and bootstrap samples. For the comparison with existing tests from the literature simulation studies are conducted. The empirical results obtained confirm the theoretical findings.},
  language  = {en}
}
@misc{FrauenrathBeckerHezeletal.2010,
  author    = {Frauenrath, Tobias and Becker, Meike and Hezel, Fabian and Krombach, Gabriele A. and Kremer, Ute and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Comparison of Left Function Assessment Using Phonocardiogram and Electrocardiogram Triggered 2D SSFP CINE MR Imaging at 1.5 T and 3.0 T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to distortions and mistriggering increases and with it the motivation for a cardiac triggering alternative. Hence, this study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects at 1.5T and 3.0T.},
  language  = {en}
}
@inproceedings{JanotteFecklerKoetteretal.2014,
  author    = {Janotte, N. and Feckler, G. and K{\"o}tter, Jens and Decker, Stefan and Herrmann, Ulf and Schmitz, Mark and L{\"u}pfert, E.},
  title     = {Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification},
  series = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  booktitle = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-63266-904-9},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2014.03.012},
  pages     = {109 -- 117},
  year      = {2014},
  language  = {en}
}
@phdthesis{Mainz2017,
  author    = {Mainz, Stefan},
  title     = {Zur Berechnung der Tragf{\"a}higkeit von d{\"u}nnwandigen Koppelpfetten aus Kaltprofilen f{\"u}r Biegung um die schwache Achse und Torsion},
  address   = {Hamburg},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:1373-opus-3798},
  pages     = {261 Seiten},
  year      = {2017},
  language  = {de}
}
@techreport{DammAnthrakidisFend2016,
  author    = {Damm, Marc Andr{\´e} and Anthrakidis, Anette and Fend, Thomas},
  title     = {Keramische Porenk{\"o}rpersysteme als SCR-Mischer und Hydrolysekatalysator : BMBF-Projekt: Hydromix : Schlussbericht : Laufzeit: 01.10.2011 bis 31.03.2015},
  address   = {Aachen},
  pages     = {30 Seiten : Illustrationen, Diagramme},
  year      = {2016},
  language  = {de}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@article{WillmsBeerFroehlkeetal.1993,
  author    = {Willms, Herbert and Beer, Stefan and Fr{\"o}hlke, K. and Haidn, O.J.},
  title     = {Regelung eines Wasserstoff-/Sauerstoff-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors},
  year      = {1993},
  language  = {de}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@article{FinkenbergerSchlaich2014,
  author    = {Finkenberger, Isabel Maria and Schlaich, Christoph},
  title     = {Mehr als Wohnen. Vom Zusammenleben in integrierten Nachbarschaften},
  series = {APuZ - Aus Politik und Zeitgeschichte},
  volume    = {2014},
  journal   = {APuZ - Aus Politik und Zeitgeschichte},
  number    = {20-21},
  publisher = {Bundeszentrale f{\"u}r politische Bildung - bpb},
  address   = {Bonn},
  issn      = {2194-3621},
  pages     = {46 -- 52},
  year      = {2014},
  abstract  = {Neue D{\"o}rfer braucht das Land! D{\"o}rfer in der Stadt und D{\"o}rfer auf dem Land (…). Die Planung und Gestaltung nachhaltiger Raumsysteme, die durch ein neues Verst{\"a}ndnis des gemeinschaftlichen Besitzes (und dessen Nutzung) ressourcenfressende Individualisierungstendenzen unserer Gesellschaft {\"u}berwinden, aber zugleich gr{\"o}ßtm{\"o}glichen Freiraum f{\"u}r eine individuelle Pers{\"o}nlichkeitsentfaltung zur Verf{\"u}gung stellen." Dieses Zitat der Hamburger Initiative "Wir sind Dorf" beschreibt eine aktuelle Diskussion in unserer Gesellschaft, die sowohl in der Forschung und forschungsgeleiteten Initiativen, in Politik und Planung als auch in der B{\"u}rger-schaft stattfindet. Sie wird nicht nur auf wissenschaftlichen Veranstaltungen gef{\"u}hrt, sondern auch in konkreten Projekten f{\"u}r integrative Lebenswelten, die Fragestellungen von Ern{\"a}hrung und Energieversorgung, von Arbeit und {\"O}konomie, aber auch eines neuen r{\"a}umlichen und sozialen Miteinanders einbeziehen. Anders als bei den weit verbreiteten Baugruppen geht es nicht ausschließlich um die Schaffung von Wohnraum. Die Nachbarschaftsidee verbindet das Bed{\"u}rfnis nach gemeinschaftlichem Wohnen und Wirtschaften mit einer neuen Werteorientierung, die auf pers{\"o}nlicher Verantwortungs{\"u}bernahme beruht.},
  language  = {de}
}
@book{DrummScheuermannWeidner2024,
  author    = {Drumm, Christian and Scheuermann, Bernd and Weidner, Stefan},
  title     = {Introduction to SAP S/4HANA® : The official companion book based on model company Global Bike-for learning, teaching, and training},
  publisher = {Espresso Tutorials},
  address   = {Gleichen},
  isbn      = {9783960122685},
  pages     = {619 Seiten},
  year      = {2024},
  abstract  = {This easy-to-understand introduction to SAP S/4HANA guides you through the central processes in sales, purchasing and procurement, finance, production, and warehouse management using the model company Global Bike. Familiarize yourself with the basics of business administration, the relevant organizational data, master data, and transactional data, as well as a selection of core business processes in SAP. Using practical examples and tutorials, you will soon become an SAP S/4HANA professional! Tutorials and exercises for beginners, advanced users, and experts make it easy for you to practice your new knowledge. The prerequisite for this book is access to an SAP S/4HANA client with Global Bike version 4.1. - Business fundamentals and processes in the SAP system - Sales, purchasing and procurement, production, finance, and warehouse management - Tutorials at different qualification levels, exercises, and recap of case studies - Includes extensive download material for students, lecturers, and professors},
  language  = {en}
}
@article{Sillius2014,
  author    = {Sillius, Sarah},
  title     = {„Viele machen gutes Marketing, ohne es zu wissen" : zwei Experten von FH [Prof. Dr. Gert Hoepner] und RWTH Aachen [Prof. Dr. Daniel Mentzel] erkl{\"a}ren, wie Unternehmen ihre Zielgruppe besser erreichen},
  series = {Wirtschaftliche Nachrichten : das Magazin f{\"u}r Unternehmen / Industrie- und Handelskammer Aachen},
  volume    = {2014},
  journal   = {Wirtschaftliche Nachrichten : das Magazin f{\"u}r Unternehmen / Industrie- und Handelskammer Aachen},
  number    = {3},
  publisher = {IHK Aachen},
  address   = {Aachen},
  pages     = {16 -- 18},
  year      = {2014},
  language  = {de}
}
@article{ArtmannGrebeHomrighausenetal.1988,
  author    = {Artmann, Gerhard and Grebe, R. and Homrighausen, A. and Wolff, H. and Teitel, P. and Schmid-Sch{\"o}nbein, H.},
  title     = {Response of normal and diabetic erythrocytes to membrane deformation by chemical and mechanical forces. Artmann, Gerhard Michael; Grebe, R.; Homrighausen, A.; Wolff, H.; Teitel, P.; Schmid-Sch{\"o}nbein, H.},
  series = {12. Jahrestagung der Gesellschaft f{\"u}r Mikrozirkulation},
  journal   = {12. Jahrestagung der Gesellschaft f{\"u}r Mikrozirkulation},
  publisher = {Karger [u.a.]},
  address   = {Basel [u.a.]},
  pages     = {196 -- 200},
  year      = {1988},
  language  = {en}
}