@article{SattlerRoegerSchwarzboezletal.2020,
  author    = {Sattler, Johannes Christoph and R{\"o}ger, Marc and Schwarzb{\"o}zl, Peter and Buck, Reiner and Macke, Ansgar and Raeder, Christian and G{\"o}ttsche, Joachim},
  title     = {Review of heliostat calibration and tracking control methods},
  series = {Solar Energy},
  volume    = {207},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.solener.2020.06.030},
  pages     = {110 -- 132},
  year      = {2020},
  abstract  = {Large scale central receiver systems typically deploy between thousands to more than a hundred thousand heliostats. During solar operation, each heliostat is aligned individually in such a way that the overall surface normal bisects the angle between the sun's position and the aim point coordinate on the receiver. Due to various tracking error sources, achieving accurate alignment ≤1 mrad for all the heliostats with respect to the aim points on the receiver without a calibration system can be regarded as unrealistic. Therefore, a calibration system is necessary not only to improve the aiming accuracy for achieving desired flux distributions but also to reduce or eliminate spillage. An overview of current larger-scale central receiver systems (CRS), tracking error sources and the basic requirements of an ideal calibration system is presented. Leading up to the main topic, a description of general and specific terms on the topics heliostat calibration and tracking control clarifies the terminology used in this work. Various figures illustrate the signal flows along various typical components as well as the corresponding monitoring or measuring devices that indicate or measure along the signal (or effect) chain. The numerous calibration systems are described in detail and classified in groups. Two tables allow the juxtaposition of the calibration methods for a better comparison. In an assessment, the advantages and disadvantages of individual calibration methods are presented.},
  language  = {en}
}
@article{DachwaldWurm2011,
  author    = {Dachwald, Bernd and Wurm, Patrick},
  title     = {Mission analysis and performance comparison for an Advanced Solar Photon Thruster},
  series = {Advances in Space Research},
  volume    = {48},
  journal   = {Advances in Space Research},
  number    = {11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  pages     = {1858 -- 1868},
  year      = {2011},
  language  = {en}
}
@incollection{Bung2015,
  author    = {Bung, Daniel Bernhard},
  title     = {Laboratory models of free-surface flows},
  series = {Rivers - physical, fluvial and environmental processes},
  booktitle = {Rivers - physical, fluvial and environmental processes},
  editor    = {Rowinski, Pawel},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-17718-2 ; 978-3-319-17719-9},
  doi       = {10.1007/978-3-319-17719-9_9},
  pages     = {213 -- 228},
  year      = {2015},
  abstract  = {Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.},
  language  = {en}
}
@inproceedings{WuBronderPoghossianetal.2014,
  author    = {Wu, Chunsheng and Bronder, Thomas and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 4},
  year      = {2014},
  language  = {en}
}
@inproceedings{HuckPoghossianBuniatyanetal.2014,
  author    = {Huck, Christina and Poghossian, Arshak and Buniatyan, V. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 5},
  year      = {2014},
  language  = {en}
}
@inproceedings{ValeroBung2015,
  author    = {Valero, Daniel and Bung, Daniel Bernhard},
  title     = {Hybrid investigation of air transport processes in moderately sloped stepped spillway flows},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 10},
  year      = {2015},
  language  = {en}
}
@incollection{SchoeningPoghossianGluecketal.2014,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Gl{\"u}ck, Olaf and Thust, Marion},
  title     = {Electrochemical methods for the determination of chemical variables in aqueous media},
  series = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement},
  booktitle = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla.},
  isbn      = {978-1-4398-4891-3},
  pages     = {55-1 -- 55-54},
  year      = {2014},
  language  = {en}
}
@article{PancContiuBocanetetal.2019,
  author    = {Panc, Nicolae and Contiu, Glad and Bocanet, Vlad and Thurn, Laura and Sabau, Emilia},
  title     = {The influence of cutting technology on surface wear hardness},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {3},
  issn      = {1583-7904},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@incollection{ChansonBungMatos2015,
  author    = {Chanson, Hubert and Bung, Daniel Bernhard and Matos, J.},
  title     = {Stepped spillways and cascades},
  series = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  booktitle = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  publisher = {CRC Press},
  address   = {Boca Raton, Fla. [u.a.]},
  isbn      = {978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)},
  pages     = {45 -- 64},
  year      = {2015},
  language  = {en}
}
@article{SchifferFerrein2018,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {ERIKA—Early Robotics Introduction at Kindergarten Age},
  series = {Multimodal Technologies Interact},
  volume    = {2},
  journal   = {Multimodal Technologies Interact},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2414-4088},
  doi       = {10.3390/mti2040064},
  pages     = {15},
  year      = {2018},
  abstract  = {In this work, we report on our attempt to design and implement an early introduction to basic robotics principles for children at kindergarten age. One of the main challenges of this effort is to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. The humanoid robot Pepper from Softbank, which is a great platform for human-robot interaction experiments, was used to present a lecture on robotics by reading out the contents to the children making use of its speech synthesis capability. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. In this quiz, two LEGO Mindstorm EV3 robots were used to implement a strongly interactive scenario. Besides the thrill of being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. We got very positive feedback from the children as well as from their educators. To the best of our knowledge, this is one of only few attempts to use a robot like Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents.},
  language  = {en}
}
@article{SchwabedalSippelBrandtetal.2018,
  author    = {Schwabedal, Justus T. C. and Sippel, Daniel and Brandt, Moritz D. and Bialonski, Stephan},
  title     = {Automated Classification of Sleep Stages and EEG Artifacts in Mice with Deep Learning},
  doi       = {10.48550/arXiv.1809.08443},
  year      = {2018},
  abstract  = {Sleep scoring is a necessary and time-consuming task in sleep studies. In animal models (such as mice) or in humans, automating this tedious process promises to facilitate long-term studies and to promote sleep biology as a data-driven f ield. We introduce a deep neural network model that is able to predict different states of consciousness (Wake, Non-REM, REM) in mice from EEG and EMG recordings with excellent scoring results for out-of-sample data. Predictions are made on epochs of 4 seconds length, and epochs are classified as artifactfree or not. The model architecture draws on recent advances in deep learning and in convolutional neural networks research. In contrast to previous approaches towards automated sleep scoring, our model does not rely on manually defined features of the data but learns predictive features automatically. We expect deep learning models like ours to become widely applied in different fields, automating many repetitive cognitive tasks that were previously difficult to tackle.},
  language  = {en}
}
@inproceedings{HofmannMatareNeumannetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Neumann, Tobias and Sch{\"o}nitz, Sebastian and Henke, Christoph and Limpert, Nicolas and Niemueller, Tim and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-00308-1},
  doi       = {10.1007/978-3-030-00308-1_40},
  pages     = {486 -- 497},
  year      = {2018},
  language  = {en}
}
@article{HoltrupSadeghfamHeuermannetal.2014,
  author    = {Holtrup, S. and Sadeghfam, Arash and Heuermann, Holger and Awakowicz, P.},
  title     = {Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters},
  series = {IEEE transactions on microwave theories and techniques},
  volume    = {62},
  journal   = {IEEE transactions on microwave theories and techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2014.2342652},
  pages     = {2471 -- 2480},
  year      = {2014},
  abstract  = {High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.},
  language  = {en}
}
@inproceedings{SadeghfamSadeghiAhangarElgamaletal.2019,
  author    = {Sadeghfam, Arash and Sadeghi-Ahangar, A. and Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications},
  series = {IEEE MTT-S International Microwave Symposium Digest},
  booktitle = {IEEE MTT-S International Microwave Symposium Digest},
  isbn      = {978-172811309-8},
  pages     = {63 -- 66},
  year      = {2019},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Mass Customized Production of Information Services - The combination of economies-of-scale with economies-of-scope},
  series = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  journal   = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ [u.a.]},
  isbn      = {0-8058-4165-2},
  pages     = {267 S. : graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{RoeschKratzHeringetal.2016,
  author    = {R{\"o}sch, C. and Kratz, F. and Hering, T. and Trautmann, S. and Umanskaya, N. and Tippk{\"o}tter, Nils and M{\"u}ller-Renno, C.M. and Ulber, Roland and Hannig, M. and Ziegler, C.},
  title     = {Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity},
  series = {Colloids and Surfaces B: Biointerfaces},
  volume    = {149},
  journal   = {Colloids and Surfaces B: Biointerfaces},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.colsurfb.2016.09.048},
  pages     = {115 -- 121},
  year      = {2016},
  abstract  = {The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.},
  language  = {en}
}
@article{MolinnusBaeckerSiegertetal.2015,
  author    = {Molinnus, Denise and B{\"a}cker, Matthias and Siegert, Petra and Willenberg, H. and Poghossian, Arshak and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline Based on Substrate Recycling Amplification},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.708},
  pages     = {540 -- 543},
  year      = {2015},
  abstract  = {An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.},
  language  = {en}
}
@inproceedings{BeckerEggertWinkelmannetal.2011,
  author    = {Becker, J{\"o}rg and Eggert, Mathias and Winkelmann, Axel and Knackstedt, Ralf},
  title     = {Towards a Contingency Theory based Model of the Influence of Regulation on MIS},
  series = {Proceedings of the Seventeenth Americas Conference on Information Systems, Detroit, Michigan August 4th -7 th 2011},
  booktitle = {Proceedings of the Seventeenth Americas Conference on Information Systems, Detroit, Michigan August 4th -7 th 2011},
  year      = {2011},
  language  = {en}
}
@book{Laack2000,
  author    = {Laack, Walter van},
  title     = {Nobody ever dies! / 1. ed.},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-03-8},
  pages     = {272 S.},
  year      = {2000},
  language  = {en}
}
@article{NiemuellerFerreinBecketal.2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Design Principles of the Component-Based Robot Software Framework Fawkes},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  journal   = {Simulation, Modeling, and Programming for Autonomous Robots},
  pages     = {300 -- 311},
  year      = {2010},
  language  = {en}
}
@article{FerreinSteinbauer2010,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {On the Way to High-Level Programming for Resource-Limited Embedded Systems with Golog},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  journal   = {Simulation, Modeling, and Programming for Autonomous Robots},
  pages     = {229 -- 240},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  journal   = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  isbn      = {1610-1987},
  pages     = {175 -- 178},
  year      = {2010},
  language  = {en}
}
@incollection{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Mechanics of soft tissue reactions to textile mesh implants},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_11},
  pages     = {251 -- 275},
  year      = {2018},
  abstract  = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Self-Adjoint Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {692 -- 697},
  year      = {2009},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Unitary Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {807 -- 809},
  year      = {2009},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Projection},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {497 -- 499},
  year      = {2009},
  language  = {en}
}
@article{AbouzarPoghossianCherstvyetal.2012,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Cherstvy, Andrey G. and Pedraza, Angela M. and Ingebrandt, Sven and Sch{\"o}ning, Michael Josef},
  title     = {Label-free electrical detection of DNA by means of field-effect nanoplate capacitors: Experiments and modeling},
  series = {Physica Status Solidi (a)},
  volume    = {209},
  journal   = {Physica Status Solidi (a)},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201100710},
  pages     = {925 -- 934},
  year      = {2012},
  abstract  = {Label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization/denaturation by means of an array of individually addressable field-effect-based nanoplate silicon-on-insulator (SOI) capacitors modified with gold nanoparticles (Au-NP) is investigated. The proposed device detects charge changes on Au-NP/DNA hybrids induced by the hybridization or denaturation event. DNA hybridization was performed in a high ionic-strength solution to provide a high hybridization efficiency. On the other hand, to reduce the screening of the DNA charge by counter ions and to achieve a high sensitivity, the sensor signal induced by the hybridization and denaturation events was measured in a low ionic-strength solution. High sensor signals of about 120, 90, and 80 mV were registered after the DNA hybridization, denaturation, and re-hybridization events, respectively. Fluorescence microscopy has been applied as reference method to verify the DNA immobilization, hybridization, and denaturation processes. An electrostatic charge-plane model for potential changes at the gate surface of a nanoplate field-effect sensor induced by the DNA hybridization has been developed taking into account both the Debye length and the distance of the DNA charge from the gate surface.},
  language  = {en}
}
@article{Laack2014,
  author    = {Laack, Walter van},
  title     = {Therefore Fermat is right},
  series = {American journal of humanities and social sciences : AJHSS},
  volume    = {2},
  journal   = {American journal of humanities and social sciences : AJHSS},
  number    = {2},
  issn      = {2329-079X (E-Journal); 2329-0781 (Print)},
  pages     = {117 -- 120},
  year      = {2014},
  abstract  = {It was Fernat's idea to investigate how many numbers would fulfill the equation according to the Pythagorean Theorem if the exponent were increased to random, e.g. to a3 + b3 = c3. His question became therefore: are there two whole numbers the cubes of which add up to the volume of the cube of a third whole number? He posed this same question, of course, for all kinds of higher exponents, so that the equation could be generalized: is there an integral solution for the equation an + bn = cn, if the exponent n is higher than 2? Although in 1993, the English mathematician Andrew Wiles was able to produce an arithmetical proof for Fermat's famous theorem, I will show that there is a simple logical explanation which is also pragmatic and plausible and what is the result of a fundamental alternative idea how our world seems to be constructed.},
  language  = {en}
}
@article{Stulpe2019,
  author    = {Stulpe, Werner},
  title     = {Aspects of the Quantum-Classical Connection Based on Statistical Maps},
  series = {Foundations of Physics},
  volume    = {49},
  journal   = {Foundations of Physics},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s10701-019-00269-9},
  pages     = {677 -- 692},
  year      = {2019},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {440 -- 444},
  year      = {2009},
  language  = {en}
}
@article{HeuermannIbrahim2008,
  author    = {Heuermann, Holger and Ibrahim, Irfan},
  title     = {Novel theory and architecture of a vector signal generator implemented with two PLLs / Ibrahim, Irfan ; Heuermann, Holger},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {85 -- 88},
  year      = {2008},
  language  = {en}
}
@article{StulpeBuschHellwig1993,
  author    = {Stulpe, Werner and Busch, P. and Hellwig, K.-E.},
  title     = {Classical Representations of Finite-Dimensional Quantum Mechanics. Busch, P.; Hellwig, K.-E.; Stulpe, W.},
  series = {International Journal of Theoretical Physics. 32 (1993), H. 3},
  journal   = {International Journal of Theoretical Physics. 32 (1993), H. 3},
  isbn      = {1572-9575},
  pages     = {399 -- 405},
  year      = {1993},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {Dual mode radio: A new tranceiver architecture for UWB and 60 GHz-applications},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {147 -- 150},
  year      = {2008},
  language  = {en}
}
@article{PoghossianKraemerAbouzaretal.2009,
  author    = {Poghossian, Arshak and Kr{\"a}mer, Melina and Abouzar, Maryam H. and Pita, Marcos and Katz, Evgeny and Sch{\"o}ning, Michael Josef},
  title     = {Interfacing of biocomputing systems with silicon chips: Enzyme logic gates based on field-effect devices},
  series = {Procedia Chemistry. 1 (2009), H. 1},
  journal   = {Procedia Chemistry. 1 (2009), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1876-6196},
  pages     = {682 -- 685},
  year      = {2009},
  language  = {en}
}
@incollection{SchoeningPoghossianGluecketal.2014,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Gl{\"u}ck, Olaf and Thust, Marion},
  title     = {Electrochemical composition measurement},
  series = {Measurement, instrumentation, and sensors handbook: electromagnetic, optical, radiation, chemical, and biomedical measuremen},
  booktitle = {Measurement, instrumentation, and sensors handbook: electromagnetic, optical, radiation, chemical, and biomedical measuremen},
  edition   = {2nd ed.},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fa.},
  isbn      = {978-1-4398-4891-3},
  pages     = {55-1 -- 55-54},
  year      = {2014},
  language  = {en}
}
@article{PoghossianGeisslerSchoening2019,
  author    = {Poghossian, Arshak and Geissler, Hanno and Sch{\"o}ning, Michael Josef},
  title     = {Rapid methods and sensors for milk quality monitoring and spoilage detection},
  series = {Biosensors and Bioelectronics},
  volume    = {140},
  journal   = {Biosensors and Bioelectronics},
  number    = {Article 111272},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.04.040},
  year      = {2019},
  language  = {en}
}
@inproceedings{ThurnBalcGebhardtetal.2017,
  author    = {Thurn, Laura and Balc, Nicolae and Gebhardt, Andreas and Kessler, Julia},
  title     = {Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab},
  series = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)},
  issn      = {2261-236X},
  doi       = {10.1051/matecconf/201713702013},
  pages     = {6 Seiten},
  year      = {2017},
  language  = {en}
}
@article{Laack2014,
  author    = {Laack, Walter van},
  title     = {Nature is much smarter than expected: the Genetic Code is not degenerate},
  series = {American journal of humanities and social sciences},
  volume    = {Vol. 2},
  journal   = {American journal of humanities and social sciences},
  number    = {No. 1},
  issn      = {2329-0781 (Print) ; 2329-079X (Online)},
  pages     = {10 -- 12},
  year      = {2014},
  abstract  = {In any books about genetics it can still today be read that our genetic code is called "degenerate" because it is still believed that 43 = 64 triplets encode the 20 essential amino acids. Indeed we have to assume the inverse law, what means that 34 = 81 exact code positions are really effective for our genetic code and encode the amino acids, compiled to proteins. This very important discovery leads to two completely new results that are limits-overlooking: 1) 34 (=81) genetic code positions mean exactly the same number as there are stable and naturally existing chemical elements in our universe. This famous argument should now lead to some alternative, as well as new fundamental conclusions about our existence. 2) A genetic code positioning system shows that nature is much smarter than expected: mutations are made less dangerous than believed, because they won't be that easily able any more to cause severe damages in the protein-synthesis. This should also lead to some alternative views upon evolution of life.},
  language  = {en}
}
@article{VoegeleRuebbelkeGovorukhaetal.2019,
  author    = {V{\"o}gele, Stefan and R{\"u}bbelke, Dirk and Govorukha, Kristina and Grajewski, Matthias},
  title     = {Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany},
  series = {Climatic Change},
  journal   = {Climatic Change},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0165-0009},
  doi       = {10.1007/s10584-019-02366-0},
  pages     = {1 -- 16},
  year      = {2019},
  language  = {en}
}
@article{PoghossianWagnerSchoening2009,
  author    = {Poghossian, Arshak and Wagner, Holger and Sch{\"o}ning, Michael Josef},
  title     = {Functional testing and characterisation of (bio-)chemical sensors on wafer level},
  series = {Procedia Chemistry. 1 (2009), H. 1},
  journal   = {Procedia Chemistry. 1 (2009), H. 1},
  isbn      = {1876-6196},
  pages     = {835 -- 838},
  year      = {2009},
  language  = {en}
}
@article{BeckBuchleitnerFerreinetal.2014,
  author    = {Beck, Daniel and Buchleitner, Martin and Ferrein, Alexander and Niem{\"u}ller, Tim and Steinbauer, Gerald},
  title     = {Mostly Harmless \& AllemaniACs - mixed innovations},
  pages     = {1 -- 8},
  year      = {2014},
  language  = {en}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}
@article{AbouzarPoghossianSiqueiraetal.2010,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Siqueira, Jos{\´e} R. Jr. and Oliveira, Osvaldo N. Jr. and Moritz, Werner and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive electrolyte-insulator-semiconductor structures functionalised with a polyelectrolyte/enzyme multilayer: New strategy for enhanced field-effect biosensing},
  series = {Physica Status Solidi (A). 207 (2010), H. 4},
  journal   = {Physica Status Solidi (A). 207 (2010), H. 4},
  isbn      = {1862-6300},
  pages     = {884 -- 890},
  year      = {2010},
  language  = {en}
}
@incollection{WagemannTippkoetter2018,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries: a short introduction},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_4},
  pages     = {1 -- 11},
  year      = {2018},
  abstract  = {The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.},
  language  = {en}
}
@inproceedings{NixFrotscherStaat2012,
  author    = {Nix, Yvonne and Frotscher, Ralf and Staat, Manfred},
  title     = {Implementation of the edge-based smoothed extended finite element method},
  series = {Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012},
  booktitle = {Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012},
  editor    = {Eberhardsteiner, J.},
  year      = {2012},
  language  = {en}
}
@article{PoghossianIngebrandtOffenhaeusseretal.2009,
  author    = {Poghossian, Arshak and Ingebrandt, S. and Offenh{\"a}usser, A. and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect devices for detecting cellular signals},
  series = {Seminars in Cell \& Developmental Biology. 20 (2009), H. 1},
  journal   = {Seminars in Cell \& Developmental Biology. 20 (2009), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1096-3634},
  pages     = {41 -- 48},
  year      = {2009},
  language  = {en}
}
@inproceedings{AlhwarinFerreinScholl2019,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {An Efficient Hashing Algorithm for NN Problem in HD Spaces},
  series = {Lecture Notes in Computer Science},
  booktitle = {Lecture Notes in Computer Science},
  isbn      = {978-303005498-4},
  doi       = {10.1007/978-3-030-05499-1_6},
  pages     = {101 -- 115},
  year      = {2019},
  language  = {en}
}
@article{ScholzLeyDachwaldetal.2010,
  author    = {Scholz, A. and Ley, Wilfried and Dachwald, Bernd and Miau, J. J. and Juang, J. C.},
  title     = {Flight results of the COMPASS-1 picosatellite mission},
  series = {Acta Astronautica. 67 (2010), H. 9-10},
  journal   = {Acta Astronautica. 67 (2010), H. 9-10},
  isbn      = {0094-5765},
  pages     = {1289 -- 1298},
  year      = {2010},
  language  = {en}
}
@article{TranStaat2010,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method},
  pages     = {1 -- 7},
  year      = {2010},
  language  = {en}
}
@article{WulfhorstDuweMerseburgetal.2016,
  author    = {Wulfhorst, Helene and Duwe, Anna-Maria and Merseburg, Johannes and Tippk{\"o}tter, Nils},
  title     = {Compositional analysis of pretreated (beech) wood using differential scanning calorimetry and multivariate data analysis},
  series = {Tetrahedron},
  volume    = {72},
  journal   = {Tetrahedron},
  number    = {46},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.tet.2016.04.029},
  pages     = {7329 -- 7334},
  year      = {2016},
  abstract  = {The composition of plant biomass varies depending on the feedstock and pre-treatment conditions and influences its processing in biorefineries. In order to ensure optimal process conditions, the quantitative proportion of the main polymeric components of the pre-treated biomass has to be determined. Current standard procedures for biomass compositional analysis are complex, the measurements are afflicted with errors and therefore often not comparable. Hence, new powerful analytical methods are urgently required to characterize biomass. In this contribution, Differential Scanning Calorimetry (DSC) was applied in combination with multivariate data analysis (MVA) to detect the cellulose content of the plant biomass pretreated by Liquid Hot Water (LHW) and Organosolv processes under various conditions. Unlike conventional techniques, the developed analytic method enables the accurate quantification of monosaccharide content of the plant biomass without any previous sample preparation. It is easy to handle and avoids errors in sample preparation.},
  language  = {en}
}