@inproceedings{DarvenizaFlisowskiKernetal.2002,
  author    = {Darveniza, M. and Flisowski, Z. and Kern, Alexander and Landers, E.-U. and LoPiparo, G. and Mazzetti, C. and Rousseau, A. and Sherlock, J.},
  title     = {Application problems of the probabilistic approach to the assessment of risk for structures and services},
  year      = {2002},
  abstract  = {The paper deals with the development of the probabilistic approach to the assessment of risk due to lightning. Sources of damage, types of damage and types of loss are defined and, accordingly, the procedure for risk analysis and the way of assessment of different risk components is proposed. The way to evaluate the influence of different protection measures (lightning protection system; shielding of structure, cables and equipment; routing of internal wiring; surge protective device) in reducing such probabilities is considered. The paper has been prepared within the framework of the activity of IEC TC81-WG9/CLC TC81-WG4 directed to prepare the draft IEC 62305-2 Risk Management, in cooperation with the Secretary of IEC/CLC TC81.},
  language  = {en}
}
@inproceedings{DalguerRenaultChurilovetal.2016,
  author    = {Dalguer, Luis A. and Renault, Philippe and Churilov, Sergey and Butenweg, Christoph},
  title     = {Evaluation of fragility curves for a three-storey-reinforced-concrete mock-up of SMART 2013 project},
  series = {Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015},
  booktitle = {Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015},
  organization    = {Conference on Structural Mechanics in Reactor Technology <23, 2015, Manchester>},
  pages     = {1 -- 9},
  year      = {2016},
  language  = {en}
}
@inproceedings{DalguerChurilovButenwegetal.2014,
  author    = {Dalguer, Luis A. and Churilov, Sergey and Butenweg, Christoph and Renault, Philippe and Hyun, An Jun},
  title     = {Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS},
  series = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  booktitle = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  organization    = {Workshop SMART2013 <2014, Paris>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{ChurilovDumovaJovanoskaButenweg2013,
  author    = {Churilov, Sergej and Dumova-Jovanoska, Elena and Butenweg, Christoph},
  title     = {Seismic verification of existing masonry buildings and strengthening with reinforced concrete jackets},
  series = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  booktitle = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  editor    = {Adam, Christoph and Heuer, Rudolf and Lenhardt, Wolfgang and Schranz, Christian},
  isbn      = {978-3-902749-04-8},
  year      = {2013},
  abstract  = {A methodology for assessment, seismic verification and strengthening of existing masonry buildings is presented in this paper. The verification is performed using a calculation model calibrated with the results from ambient vibration measurements. The calibrated model serves as an input for a deformation-based verification procedure based on the Capacity Spectrum Method (CSM). The bearing capacity of the building is calculated from experimental capacity curves of the individual walls idealized with bilinear elastic-perfectly plastic curves. The experimental capacity curves were obtained from in-plane cyclic loading tests on unreinforced and strengthened masonry walls with reinforced concrete jackets. The seismic action is compared with the load-bearing capacity of the building considering non-linear material behavior with its post-peak capacity. The application of the CSM to masonry buildings and the influence of a traditional strengthening method are demonstrated on the example of a public school building in Skopje, Macedonia.},
  language  = {en}
}
@inproceedings{ChudobaKuhlmannButenweg2001,
  author    = {Chudoba, Rostislav and Kuhlmann, Wolfram and Butenweg, Christoph},
  title     = {Ein internetbasiertes technisches Informationssystem zur Koordination und Pr{\"a}sentation des Sonderforschungsbereichs 532},
  series = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)},
  booktitle = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {Forum Bauinformatik <2001>},
  isbn      = {3-18-316904-5},
  pages     = {94 -- 101},
  year      = {2001},
  language  = {de}
}
@inproceedings{ChudobaButenwegPfeiffer2003,
  author    = {Chudoba, Rostislav and Butenweg, Christoph and Pfeiffer, Frank},
  title     = {Textile reinforced concrete. Part I: Process model for collaborative research and development},
  series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  publisher = {IKM},
  address   = {Weimar},
  organization    = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>},
  pages     = {1 -- 8},
  year      = {2003},
  language  = {en}
}
@inproceedings{ChudobaButenwegKuhlmann2002,
  author    = {Chudoba, Rostislav and Butenweg, Christoph and Kuhlmann, Wolfram},
  title     = {Technical information system for collaborative material research},
  series = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]},
  booktitle = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]},
  organization    = {International Conference on Computational Structures Technology <6, 2002, Prag>},
  pages     = {1 -- 11},
  year      = {2002},
  language  = {en}
}
@inproceedings{CaminosSchmitzAttietal.2022,
  author    = {Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Atti, Vikrama and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon},
  title     = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086262},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.},
  language  = {en}
}
@inproceedings{CacciatoreButenweg2020,
  author    = {Cacciatore, Pamela and Butenweg, Christoph},
  title     = {Seismic safety of cylindrical granular material steel silos under seismic loading},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {231 -- 244},
  year      = {2020},
  language  = {en}
}
@inproceedings{BoehmHellmannsBackesetal.2006,
  author    = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus},
  title     = {Lock-in thermography based NDT of automotive parts},
  series = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China},
  booktitle = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China},
  publisher = {Beijing Adhesion Society of China},
  address   = {Beijing},
  pages     = {382 -- 384},
  year      = {2006},
  language  = {en}
}
@inproceedings{ButenwegThierauf1996,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Erfahrungen bei der Entwicklung eines objekt-orientierten FE-Programmes},
  series = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)},
  booktitle = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-313504-3},
  pages     = {60 -- 65},
  year      = {1996},
  language  = {de}
}
@inproceedings{ButenwegThierauf1997,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Optimum cost design of reinforced concrete structures using parallel computing},
  series = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping},
  booktitle = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping},
  publisher = {Saxe-Coburg Publication},
  address   = {Edinburgh},
  organization    = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <1, 1997, Lochinver, Scotland>},
  isbn      = {0-948749-47-4},
  pages     = {197 -- 202},
  year      = {1997},
  language  = {en}
}
@inproceedings{ButenwegThierauf1998,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Optimum design of reinforced concrete structures},
  series = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping},
  booktitle = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Edinburgh},
  organization    = {International Conference on Computational Structures Technology <4, 1998, Edinburgh>},
  isbn      = {0-948749-57-1},
  pages     = {447 -- 458},
  year      = {1998},
  language  = {en}
}
@inproceedings{ButenwegThierauf1999,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Bemessung und Kostenoptimierung von Stahlbetontragwerken},
  series = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  booktitle = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  publisher = {Balkema},
  address   = {Rotterdam},
  organization    = {Fachtagung Baustatik, Baupraxis <7, 1999, Aachen>},
  isbn      = {90-5809-044-2},
  pages     = {213 -- 220},
  year      = {1999},
  language  = {de}
}
@inproceedings{ButenwegSadeghAzarMeskouris2004,
  author    = {Butenweg, Christoph and Sadegh-Azar, H. and Meskouris, Konstantin},
  title     = {Seismische Vulnerabilit{\"a}t von bestehenden Bauwerken},
  series = {5. Forum und Gefahrentag : auf der Suche nach dem Risiko : ein aktuelles Symposium zu Fragen der Risikowahrnehmung und Katastrophenvorsorge in Deutschland, ZDF Mainz Lerchenberg, 13. - 14. Oktober, 2004},
  booktitle = {5. Forum und Gefahrentag : auf der Suche nach dem Risiko : ein aktuelles Symposium zu Fragen der Risikowahrnehmung und Katastrophenvorsorge in Deutschland, ZDF Mainz Lerchenberg, 13. - 14. Oktober, 2004},
  pages     = {1},
  year      = {2004},
  language  = {de}
}
@inproceedings{ButenwegRosinKubalski2013,
  author    = {Butenweg, Christoph and Rosin, Julia and Kubalski, Thomas},
  title     = {Seismic response of conventional and base-isolated liquid storage tanks},
  series = {International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien},
  booktitle = {International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien},
  organization    = {International Conference on Earthquake Engineering <2013, Skopje>},
  pages     = {1 -- 8},
  year      = {2013},
  language  = {en}
}
@inproceedings{ButenwegRajan2014,
  author    = {Butenweg, Christoph and Rajan, Sreelakshmy},
  title     = {Design and construction techniques of AAC masonry buildings in earthquakes regions},
  series = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  booktitle = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  year      = {2014},
  language  = {en}
}
@inproceedings{ButenwegPark2011,
  author    = {Butenweg, Christoph and Park, Jin},
  title     = {Verhalten von Ankerschienensystemen unter statisch zyklischen Beanspruchungen},
  series = {12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt f{\"u}r Geowissenschaften und Rohstoffe. C. K{\"o}nke (Hrsg.)},
  booktitle = {12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt f{\"u}r Geowissenschaften und Rohstoffe. C. K{\"o}nke (Hrsg.)},
  address   = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik},
  organization    = {D-A-C-H Tagung <12, 2011, Hannover>},
  isbn      = {3-930108-11-9},
  pages     = {349 -- 365},
  year      = {2011},
  language  = {de}
}
@inproceedings{ButenwegNorda2013,
  author    = {Butenweg, Christoph and Norda, Hannah},
  title     = {Nonlinear analysis of masonry structures according to Eurocode 8},
  series = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  booktitle = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  editor    = {Adam, Christoph and Heuer, Rudolf and Lenhardt, Wolfgang and Schranz, Christian},
  isbn      = {978-3-902749-04-8},
  year      = {2013},
  language  = {en}
}
@inproceedings{ButenwegMistler2006,
  author    = {Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic resistance of unreinforced masonry buildings},
  series = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <8, 2006, Las Palmas>},
  isbn      = {1-905088-06-X},
  doi       = {10.4203/ccp.83.9},
  pages     = {Paper 9},
  year      = {2006},
  language  = {en}
}
@inproceedings{ButenwegMeyerFehling2014,
  author    = {Butenweg, Christoph and Meyer, Udo and Fehling, Ekkehard},
  title     = {INSYSME: first activities of the German partners},
  series = {9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014},
  booktitle = {9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014},
  year      = {2014},
  language  = {en}
}
@inproceedings{ButenwegMeskourisMeisteretal.2011,
  author    = {Butenweg, Christoph and Meskouris, Konstantin and Meister, Sylvia and Dreyer, Stephan and Schulte-Althoff, Christoph},
  title     = {Technisches Informationssystem f{\"u}r die Entwicklung textilbewehrten Betons},
  series = {Textilbeton in Theorie und Praxis : Tagungsband zum 6. Kolloquium zu Textilbewehrten Tragwerken (CTRS6) in Berlin am 19. und 20.9.2011 / Technische Universit{\"a}t Dresden, Sonderforschungsbereich 528, herausgegeben von Manfred Curbach und Regine Ortlepp},
  booktitle = {Textilbeton in Theorie und Praxis : Tagungsband zum 6. Kolloquium zu Textilbewehrten Tragwerken (CTRS6) in Berlin am 19. und 20.9.2011 / Technische Universit{\"a}t Dresden, Sonderforschungsbereich 528, herausgegeben von Manfred Curbach und Regine Ortlepp},
  publisher = {Technische Universit{\"a}t},
  address   = {Dresden},
  organization    = {Kolloquium zu Textilbewehrten Tragwerken <6, 2011, Dresden>},
  isbn      = {978-3-86780-122-5},
  pages     = {257 -- 268},
  year      = {2011},
  language  = {de}
}
@inproceedings{ButenwegMarinkovićPaveseetal.2021,
  author    = {Butenweg, Christoph and Marinković, Marko and Pavese, Alberto and Lanese, Igor and Hoffmeister, Benno and Pinkawa, Marius and Vulcu, Mihai-Cristian and Bursi, Oreste and Nardin, Chiara and Paolacci, Fabrizio and Quinci, Gianluca and Fragiadakis, Michalis and Weber, Felix and Huber, Peter and Renault, Philippe and G{\"u}ndel, Max and Dyke, Shirley and Ciucci, M. and Marino, A.},
  title     = {Seismic performance of multi-component systems in special risk industrial facilities},
  series = {17. World Conference on Earthquake Engineering , Sendai , Japan , 17WCEE , 2021-09-27 - 2021-10-02},
  booktitle = {17. World Conference on Earthquake Engineering , Sendai , Japan , 17WCEE , 2021-09-27 - 2021-10-02},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi- Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behavior of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behavior of the test structure and installations is investigated with and without base isolation. Furthermore, both firmly anchored and isolated components are taken into account to compare their dynamic behavior and interactions with each other. Artificial and synthetic ground motions are applied to study the seismic response at different PGA levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the numerical simulations to calibrate the tests on the prototype, the experimental setup of the investigated structure and installations, selected measurement data and finally describes preliminary experimental results.},
  language  = {en}
}
@inproceedings{ButenwegMarinkovićKubalskietal.2017,
  author    = {Butenweg, Christoph and Marinković, Marko and Kubalski, Thomas and Fehling, Ekkehard and Pfetzing, Thomas and Meyer, Udo},
  title     = {Innovative Ans{\"a}tze f{\"u}r die seismische Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk},
  series = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik},
  booktitle = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik},
  editor    = {Zabel, Volkmar and Beinersdorf, Silke},
  publisher = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik (DGEB) e.V.},
  address   = {Weimar},
  isbn      = {978-3-930108-13-5},
  pages     = {130 -- 145},
  year      = {2017},
  language  = {de}
}
@inproceedings{ButenwegMarinkovicFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Fehling, Ekkehard and Pfetzing, Thomas and Kubalski, Thomas},
  title     = {Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Damage reduction system for masonry infill walls under seismic loading},
  series = {ce/papers},
  volume    = {2},
  booktitle = {ce/papers},
  number    = {4},
  publisher = {Ernst \& Sohn Verlag},
  address   = {Berlin},
  doi       = {10.1002/cepa.863},
  pages     = {267 -- 273},
  year      = {2018},
  abstract  = {Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.},
  language  = {en}
}
@inproceedings{ButenwegKuhlmannLopezetal.2003,
  author    = {Butenweg, Christoph and Kuhlmann, Winfried and Lopez, M. and Fernandez, S.},
  title     = {Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations},
  series = {International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003},
  booktitle = {International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003},
  organization    = {International conference in earthquake engineering to mark 40 years from catastrophic 1963 Skopje earthquake <2003, Skopje>},
  pages     = {1 -- 8},
  year      = {2003},
  language  = {en}
}
@inproceedings{ButenwegKleemannAltayetal.2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Altay, Okyay and Renault, Philippe},
  title     = {Simulation of impact-loads on reinforced concrete structural elements},
  series = {22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013},
  booktitle = {22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013},
  organization    = {International Conference on Structural Mechanics in Reactor Technology, SMIRT <22, 2013, San Francisco, Calif.>},
  pages     = {1 -- 10},
  year      = {2013},
  language  = {en}
}
@inproceedings{ButenwegKleemannAltay2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Altay, Okyay},
  title     = {Simulation von Impact Belastungen auf Stahlbetonstrukturen},
  series = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  booktitle = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  organization    = {D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik <13, 2013, Wien>},
  pages     = {1 -- 9},
  year      = {2013},
  language  = {de}
}
@inproceedings{ButenwegHoltschoppen2014,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of industrial facilities in Germany},
  series = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  booktitle = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02809-1 ; 3-658-02809-2 (Print) ; 978-3-658-02810-7 (E-Book)},
  doi       = {10.1007/978-3-658-02810-7_6},
  pages     = {63 -- 74},
  year      = {2014},
  language  = {de}
}
@inproceedings{ButenwegGellertReindl2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas},
  title     = {Capacity design of masonry buildings under cyclic loading},
  series = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  booktitle = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  publisher = {Editions de l'Universit{\´e} de Li{\`e}ge},
  address   = {Li{\`e}ge},
  organization    = {Belgian Seismic Group},
  isbn      = {978-2-87456-063-7},
  pages     = {201 -- 208},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegGellertMeskouris2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meskouris, Konstantin},
  title     = {Ein neuer Ansatz zum Nachweis von Mauerwerksbauten},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  publisher = {Inst. f{\"u}r Baustatik, Univ. Karlsruhe (TH)},
  address   = {Karlsruhe},
  organization    = {Fachtagung Baustatik - Baupraxis <10, 2008, Karlsruhe>},
  isbn      = {978-3-935322-14-0},
  pages     = {103 -- 116},
  year      = {2008},
  language  = {de}
}
@inproceedings{ButenwegGellert2008,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Displacement based design of masonry structures},
  series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  publisher = {University of Newcastle},
  address   = {Callaghan},
  organization    = {International Brick and Block Masonry Conference <14, 2008, Sydney>},
  isbn      = {978-19-2070-1-92-5},
  pages     = {1 -- 10},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegBursiNardinetal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Nardin, Chiara and Lanese, Igor and Pavese, Alberto and Marinković, Marko and Paolacci, Fabrizio and Quinci, Gianluca},
  title     = {Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities},
  series = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  booktitle = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  isbn      = {9780791885352},
  doi       = {10.1115/PVP2021-61696},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed.},
  language  = {en}
}
@inproceedings{ButenwegBettziecheKuhlmannetal.2005,
  author    = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin},
  title     = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke},
  address   = {Dresden},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>},
  isbn      = {3-00-015456-6},
  pages     = {73 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{Butenweg2007,
  author    = {Butenweg, Christoph},
  title     = {Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung},
  series = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  booktitle = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  organization    = {D-A-CH Tagung <2007, Wien>},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {de}
}
@inproceedings{Butenweg2012,
  author    = {Butenweg, Christoph},
  title     = {Eurocode 8 : Erdbebenauslegung von Tragwerken},
  series = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  booktitle = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  publisher = {Freunde des Inst. f{\"u}r Massivbau der TU},
  address   = {Darmstadt},
  organization    = {Darmst{\"a}dter Massivbauseminar <36, 2012>},
  pages     = {257 -- 272},
  year      = {2012},
  language  = {de}
}
@inproceedings{Butenweg2022,
  author    = {Butenweg, Christoph},
  title     = {Seismic design and evaluation of industrial facilities},
  series = {Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology - Bucharest, 2022},
  booktitle = {Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology - Bucharest, 2022},
  editor    = {Vacareanu, Radu and Ionescu, Constantin},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-15103-3},
  issn      = {2524-342X},
  doi       = {10.1007/978-3-031-15104-0},
  pages     = {449 -- 464},
  year      = {2022},
  abstract  = {Industrial facilities must be thoroughly designed to withstand seismic actions as they exhibit an increased loss potential due to the possibly wideranging damage consequences and the valuable process engineering equipment. Past earthquakes showed the social and political consequences of seismic damage to industrial facilities and sensitized the population and politicians worldwide for the possible hazard emanating from industrial facilities. However, a holistic approach for the seismic design of industrial facilities can presently neither be found in national nor in international standards. The introduction of EN 1998-4 of the new generation of Eurocode 8 will improve the normative situation with specific seismic design rules for silos, tanks and pipelines and secondary process components. The article presents essential aspects of the seismic design of industrial facilities based on the new generation of Eurocode 8 using the example of tank structures and secondary process components. The interaction effects of the process components with the primary structure are illustrated by means of the experimental results of a shaking table test of a three story moment resisting steel frame with different process components. Finally, an integrated approach of digital plant models based on building information modelling (BIM) and structural health monitoring (SHM) is presented, which provides not only a reliable decision-making basis for operation, maintenance and repair but also an excellent tool for rapid assessment of seismic damage.},
  language  = {en}
}
@inproceedings{Butenweg2021,
  author    = {Butenweg, Christoph},
  title     = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies},
  series = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia},
  booktitle = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia},
  editor    = {Kuzmanović, Vladan and Ignjatović, Ivan},
  publisher = {University of Belgrade},
  address   = {Belgrade},
  year      = {2021},
  language  = {en}
}
@inproceedings{BruessermannDeuster2005,
  author    = {Br{\"u}ssermann, Klaus and Deuster, M.},
  title     = {Temperature measurement to optimise the burning process},
  year      = {2005},
  abstract  = {One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used.},
  subject      = {Pyrometrie},
  language  = {en}
}
@inproceedings{Bruessermann2005,
  author    = {Br{\"u}ssermann, Klaus},
  title     = {Platform of Excellence in "Energy and Environment"},
  year      = {2005},
  abstract  = {The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment" in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in J{\"u}lich and Aachen and of two scientific institutes with different topics: - NOWUM-Energy with emphasis on efficient and economic energy conversion - The Solar Institute J{\"u}lich - SIJ - being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion - nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems" and „Nuclear Applications"},
  subject      = {Energietechnik},
  language  = {en}
}
@inproceedings{BreitbachAlexopoulosMayetal.2019,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Analysis of volumetric solar radiation absorbers made of wire meshes},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117521},
  pages     = {030009-1 -- 030009-6},
  year      = {2019},
  language  = {en}
}
@inproceedings{BoesenRosinButenwegetal.2017,
  author    = {Boesen, Niklas and Rosin, Julia and Butenweg, Christoph and Deichsel, Anne and Klinkel, Sven},
  title     = {Untersuchung vorhandenerTragreserven moderner unbewehrter Mauerwerksbauten},
  series = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik},
  booktitle = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik},
  editor    = {Zabel, Volkmar and Beinersdorf, Silke},
  publisher = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik (DGEB) e.V.},
  address   = {Weimar},
  isbn      = {978-3-930108-13-5},
  pages     = {408 -- 418},
  year      = {2017},
  language  = {de}
}
@inproceedings{BlankeSchmidtGoettscheetal.2022,
  author    = {Blanke, Tobias and Schmidt, Katharina S. and G{\"o}ttsche, Joachim and D{\"o}ring, Bernd and Frisch, J{\´e}r{\^o}me and van Treeck, Christoph},
  title     = {Time series aggregation for energy system design: review and extension of modelling seasonal storages},
  series = {Energy Informatics},
  volume    = {5},
  booktitle = {Energy Informatics},
  number    = {1, Article number: 17},
  editor    = {Weidlich, Anke and Neumann, Dirk and Gust, Gunther and Staudt, Philipp and Sch{\"a}fer, Mirko},
  publisher = {Springer Nature},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-022-00208-5},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {Using optimization to design a renewable energy system has become a computationally demanding task as the high temporal fluctuations of demand and supply arise within the considered time series. The aggregation of typical operation periods has become a popular method to reduce effort. These operation periods are modelled independently and cannot interact in most cases. Consequently, seasonal storage is not reproducible. This inability can lead to a significant error, especially for energy systems with a high share of fluctuating renewable energy. The previous paper, "Time series aggregation for energy system design: Modeling seasonal storage", has developed a seasonal storage model to address this issue. Simultaneously, the paper "Optimal design of multi-energy systems with seasonal storage" has developed a different approach. This paper aims to review these models and extend the first model. The extension is a mathematical reformulation to decrease the number of variables and constraints. Furthermore, it aims to reduce the calculation time while achieving the same results.},
  language  = {en}
}
@inproceedings{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extremely high lightning peak currents},
  series = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  booktitle = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  isbn      = {978-1-5386-6635-7},
  pages     = {7 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{BirklDiendorferKernetal.2017,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  booktitle = {12. VDE/ABB-Blitzschutztagung : Beitr{\"a}ge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg},
  isbn      = {978-3-8007-4459-6},
  pages     = {146 -- 152},
  year      = {2017},
  language  = {de}
}
@inproceedings{BehrensFrentzelKern2009,
  author    = {Behrens, J{\"o}rg and Frentzel, Ralf and Kern, Alexander},
  title     = {Simulation der transienten Spannungsverl{\"a}ufe im Eigenbedarfsnetz eines Großkraftwerks bei einem kraftwerksnahen Blitzeinschlag in die Hochspannungs-Freileitung},
  isbn      = {978-3-8007-3197-8},
  year      = {2009},
  abstract  = {8. VDE/ABB-Blitzschutztagung, 29. - 30. Oktober 2009 in Neu-Ulm. Blitzschutztagung <8, 2009, Neu-Ulm> Berlin : VDE Verl. 2009 Großkraftwerke k{\"o}nnen durch Blitzentladungen mit potentiellen Auswirkungen auf deren Verf{\"u}gbarkeit und Sicherheit gef{\"a}hrdet werden. Ein sehr spezielles Szenario, welches aus aktuellem Anlass zu untersuchen war, betrifft den kraftwerksnahen Blitzeinschlag in die Hochspannungs-Freileitung am Netzanschluss der Anlage. Wird nun noch ein sogenannter Schirmfehler unterstellt, d.h. der direkte Blitzeinschlag erfolgt in ein Leiterseil des Hoch- bzw. H{\"o}chstspannungsnetzes und nicht in das dar{\"u}ber gespannte Erdseil, so bedeutet dies eine extreme elektromagnetische Einwirkung. Der vorliegende Beitrag befasst sich mit der Simulation eines solchen Blitzeinschlages und dessen Auswirkungen auf den Netzanschluss und die Komponenten der elektrischen Eigenbedarfsanlagen eines Kraftwerks auf den unterlagerten Spannungsebenen. Die dabei gewonnenen Erkenntnisse lassen sich ohne Einschr{\"a}nkungen auf Industrieanlagen mit Mittelspannungs-Netzanschluss und ohne eigener Stromversorgung {\"u}bertragen.},
  subject      = {Blitzschutz},
  language  = {de}
}
@inproceedings{BalaskasHoffmeisterButenwegetal.2021,
  author    = {Balaskas, Georgios and Hoffmeister, Benno and Butenweg, Christoph and Pilz, Marco and Bauer, Anna},
  title     = {Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models},
  series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-85072-5-8},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8539.18855},
  pages     = {987 -- 998},
  year      = {2021},
  abstract  = {This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures'health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration.},
  language  = {en}
}
@inproceedings{AugensteinKuperjansLucas2002,
  author    = {Augenstein, Eckardt and Kuperjans, Isabel and Lucas, K.},
  title     = {EUSEBIA - Decision-Support-System for Technical, Economical and Ecological Design and Evaluation of Industrial Energy Systems},
  series = {ECOS 2002 : proceedings of the 15th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, Berlin, Germany July 3 - 5, 2002. - Vol. 1},
  booktitle = {ECOS 2002 : proceedings of the 15th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, Berlin, Germany July 3 - 5, 2002. - Vol. 1},
  editor    = {Tsatsaronis,, Georgios},
  publisher = {Techn. Univ., Inst. for Energy Engineering},
  address   = {Berlin},
  isbn      = {3-00-009533-0},
  pages     = {446 -- 453},
  year      = {2002},
  language  = {en}
}
@inproceedings{AugensteinKuperjans2001,
  author    = {Augenstein, Eckardt and Kuperjans, Isabel},
  title     = {Softwaregest{\"u}tzte Analyse und Konzeption betrieblicher Energieversorgungsanlagen},
  series = {Fortschrittliche Energiewandlung und -anwendung : Schwerpunkt: dezentrale Energiesysteme ; Tagung Bochum, 13. und 14. M{\"a}rz 2001. - (VDI-Berichte ; 1594)},
  booktitle = {Fortschrittliche Energiewandlung und -anwendung : Schwerpunkt: dezentrale Energiesysteme ; Tagung Bochum, 13. und 14. M{\"a}rz 2001. - (VDI-Berichte ; 1594)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091594-3},
  pages     = {313 -- 322},
  year      = {2001},
  language  = {de}
}