@inproceedings{KirschFelberMarcheretal.2014,
  author    = {Kirsch, Ansgar and Felber, W. and Marcher, Thomas and Fuchs, W.},
  title     = {Geotechnical challenges during design and construction of a ski resort in Azerbaijan},
  series = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  booktitle = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  publisher = {{\"O}IAV - {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  address   = {Wien},
  organization    = {Danube - European Conference on Geotechnical Engineering <15, 2014, Wien>},
  isbn      = {978-3-902593-01-6},
  pages     = {757 -- 762},
  year      = {2014},
  language  = {en}
}
@inproceedings{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Numerical investigation of the face stability of shallow tunnels in sand},
  series = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  booktitle = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  publisher = {Taylor and Francis},
  address   = {London},
  organization    = {European Conference on Numerical Methods in Geotechnical Engineering <7, 2010, Trondheim>},
  isbn      = {978-0-415-59239-0},
  pages     = {779 -- 784},
  year      = {2010},
  language  = {en}
}
@inproceedings{Kirsch2009,
  author    = {Kirsch, Ansgar},
  title     = {Experimental and numerical investigation of the face stability of shallow tunnels in sand},
  series = {Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...},
  booktitle = {Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...},
  publisher = {Hungarian Tunnelling Association},
  address   = {Budapest},
  organization    = {World Tunnel Congress <2009, Budapest>},
  pages     = {1 -- 8},
  year      = {2009},
  language  = {en}
}
@article{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Experimental investigation of the face stability of shallow tunnels in sand},
  series = {Acta Geotechnica},
  volume    = {5},
  journal   = {Acta Geotechnica},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1125},
  doi       = {10.1007/s11440-010-0110-7},
  pages     = {43 -- 62},
  year      = {2010},
  abstract  = {Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and L{\´e}ca/Dormieux showed the best agreement to the measurements.},
  language  = {en}
}
@book{Kettern1993,
  author    = {Kettern, J{\"u}rgen},
  title     = {Mechanical and biological treatment of waste after separate collection / R. Damiecki; J.T. Kettern. Italian Ministry of Enviroment},
  publisher = {Eigenverlag},
  address   = {Caglieri},
  pages     = {16 S.},
  year      = {1993},
  language  = {en}
}
@techreport{KestiMononenLautsoetal.2015,
  author    = {Kesti, Jyrki and Mononen, Tarmo and Lautso, Petteri and D{\"o}ring, Bernd and Reger, Vitali and Holopainen, R. and Jung, N. and Shemeikka, J. and Nieminen, J. and Reda, F. and Lawson, Mark and Botti, Andrea and Hall, R. and Zold, A. and Buday, T.},
  title     = {Zero energy solutions for multifunctional steel intensive commercial buildings (ZEMUSIC) - EUR 27627},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-54071-4},
  issn      = {1831-9424},
  doi       = {10.2777/111520},
  pages     = {146 Seiten},
  year      = {2015},
  abstract  = {The broad commercial objective of this project was the sustainable value creation in steel building technology by addressing the ways in which significant energy reductions can be made in the operation phase of multi-storey commercial buildings. A review on energy efficient commercial buildings in Europe has been carried out consisting of several case studies from different countries. The project included development of zero-energy concepts for reducing energy demand as well as concepts for heating, cooling and ventilation systems by utilising renewable energy sources in three different climates. Also alternative structural frame solutions were developed and analyzed in respect of structural and MEP (mechanical, electrical and plumbing solutions) features. An innovative long span floor system with integrated MEP routings promises a cost effective alternative for sophisticated ventilation distribution and radiant heating and cooling systems, allowing for high energy efficiency and high quality interior climate. The report includes also review of best architectural practices for integrated renewable energy solutions including different design strategies for building facades of zero energy buildings. Interesting results and design basis are also presented for steel energy pile concept, where structural foundation piles are utilized for ground energy harvesting. Life cycle cost calculations for near zero energy office building based on developed technologies show that a near zero energy construction is also profitable. The results and work methods of the project have been summarized in the form of design guidance that offers designers the knowledge gained in a form that can be easily understood.},
  language  = {en}
}
@techreport{KestiBurstrandKnutssonSalvatoreetal.2008,
  author    = {Kesti, J. and Burstrand Knutsson, H. and Salvatore, W. and Saouridis, C. and Odrieres Mer{\´e}, J. and Georgi, H. and Casajus, A. and Butz, C. and Schneider, R. and D{\"o}ring, Bernd},
  title     = {Dissemination of knowledge in the use of steel-intensive dry construction systems in housing : final report. Contract No RFS2-CT-2004-00036. EUR 22849 EN},
  publisher = {Office for Official Publications of the European Communities},
  address   = {Luxembourg},
  organization    = {European Commission / Research Fund for Coal and Steel},
  isbn      = {978-92-79-05973-5},
  pages     = {205 S.},
  year      = {2008},
  language  = {en}
}
@article{KerresGredigkHoffmannJatheetal.2020,
  author    = {Kerres, Karsten and Gredigk-Hoffmann, Sylvia and Jathe, R{\"u}diger and Orlik, Stefan and Sariyildiz, Mustafa and Schmidt, Torsten and Sympher, Klaus-Jochen and Uhlenbroch, Adrian},
  title     = {Future approaches for sewer system condition assessment},
  series = {Water Practice \& Technology},
  journal   = {Water Practice \& Technology},
  number    = {15 (2)},
  publisher = {IWA Publishing},
  address   = {London},
  issn      = {1751-231X},
  doi       = {10.2166/wpt.2020.027},
  pages     = {386 -- 393},
  year      = {2020},
  abstract  = {Different analytical approaches exist to describe the structural substance or wear reserve of sewer systems. The aim is to convert engineering assessments of often complex defect patterns into computational algorithms and determine a substance class for a sewer section or manhole. This analytically determined information is essential for strategic rehabilitation planning processes up to network level, as it corresponds to the most appropriate rehabilitation type and can thus provide decision-making support. Current calculation methods differ clearly from each other in parts, so that substance classes determined by the different approaches are only partially comparable with each other. The objective of the German R\&D cooperation project 'SubKanS' is to develop a methodology for classifying the specific defect patterns resulting from the interaction of all the individual defects, and their severities and locations. The methodology takes into account the structural substance of sewer sections and manholes, based on real data and theoretical considerations analogous to the condition classification of individual defects. The result is a catalogue of defect patterns and characteristics, as well as associated structural substance classifications of sewer systems (substance classes). The methodology for sewer system substance classification is developed so that the classification of individual defects can be transferred into a substance class of the sewer section or manhole, eventually taking into account further information (e.g. pipe material, nominal diameter, etc.). The result is a validated methodology for automated sewer system substance classification.},
  language  = {en}
}
@inproceedings{KerpenBungValeroetal.2016,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  booktitle = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  pages     = {6 Seiten},
  year      = {2016},
  language  = {en}
}
@article{KerpenBungValeroetal.2017,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {Journal of Ocean University of China},
  volume    = {16},
  journal   = {Journal of Ocean University of China},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1993-5021},
  doi       = {10.1007/s11802-017-3355-z},
  pages     = {649 -- 654},
  year      = {2017},
  language  = {en}
}
@inproceedings{KerpenBungSchlurmann2010,
  author    = {Kerpen, N. B. and Bung, Daniel B. and Schlurmann, Torsten},
  title     = {Physical model investigations of ships passing through a lock},
  series = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  booktitle = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  editor    = {Janssen, Robert},
  publisher = {School of Civil Engineeering, The University of Queensland},
  address   = {Brisbane},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <3, 2010, Edinburgh>},
  isbn      = {9781742720159},
  pages     = {93 -- 100},
  year      = {2010},
  language  = {en}
}
@inproceedings{KerpenBungSchlurmann2010,
  author    = {Kerpen, N. B. and Bung, Daniel B. and Schlurmann, Torsten},
  title     = {Physical model investigations of pressure distributions next to ships passing through a lock},
  series = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  booktitle = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  publisher = {Univ. Press},
  address   = {Tianjin},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <5, 2010, Tianjin>},
  isbn      = {978-7-5618-3671-2},
  pages     = {514 -- 519},
  year      = {2010},
  language  = {en}
}
@inproceedings{JockwerKleiberUibel2018,
  author    = {Jockwer, R. and Kleiber, M. and Uibel, Thomas},
  title     = {Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners},
  series = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  booktitle = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  editor    = {G{\"o}rlacher, Rainer},
  publisher = {Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  pages     = {461 -- 466},
  year      = {2018},
  language  = {en}
}
@article{Jochim2004,
  author    = {Jochim, Haldor E.},
  title     = {A traffic resistance model of long-distance travel},
  series = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  journal   = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3-89301-180-3},
  pages     = {X, 84 S. : graph. Darst. + 1 CD-ROM},
  year      = {2004},
  language  = {en}
}
@article{Jochim2002,
  author    = {Jochim, Haldor E.},
  title     = {Charging rail operators for delays - how not to do it},
  series = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  journal   = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3893010858},
  year      = {2002},
  language  = {en}
}
@article{HoettgesRitterbachEls1987,
  author    = {H{\"o}ttges, J{\"o}rg and Ritterbach, E. and Els, H.},
  title     = {Optical Improvement of LDV-Measurement in Pipe Flow / Ritterbach, E.; J. H{\"o}ttges; H. Els},
  series = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group},
  journal   = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3540187561},
  pages     = {VII, 601 S : Ill., graph. Darst.},
  year      = {1987},
  language  = {en}
}
@article{HoettgesFeldhausBrockhausetal.1992,
  author    = {H{\"o}ttges, J{\"o}rg and Feldhaus, R. and Brockhaus, T. and Rouv{\´e}, Gerhard},
  title     = {Finite Element Simulation of Flow and Pollution Transport applied to a Part of the River Rhine / Feldhaus, R.; J. H{\"o}ttges, T. Brockhaus; G. Rouv{\´e}},
  series = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer},
  journal   = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer},
  publisher = {Ashgate},
  address   = {Aldershot, Hants, UK [u.a.]},
  year      = {1992},
  language  = {en}
}
@article{HoettgesArnoldRouve1994,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Measurement of transverse mixing using digital image acquisition},
  series = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  journal   = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  publisher = {Wiley},
  address   = {Chichester [u.a.]},
  isbn      = {0471941425},
  pages     = {XVI, 458 S., [8] Bl : Ill. (z.T. farb.), graph. Da},
  year      = {1994},
  language  = {en}
}
@article{HoettgesArnoldRouve1989,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / Arnold, U.; J. H{\"o}ttges; G. Rouv{\´e}},
  series = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  journal   = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  publisher = {Universal Acad. Press},
  address   = {Tokyo},
  isbn      = {4-946443-03-7},
  pages     = {569 -- 576},
  year      = {1989},
  language  = {en}
}
@article{HoettgesArnoldRouve1992,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Profiles of Mixing Coefficient in Compound Open Channel},
  series = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  journal   = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  publisher = {Hemisphere Publ. Corp.},
  address   = {Washington, DC [u.a.]},
  isbn      = {1-56032-209-8},
  pages     = {XVII, 773 S. : graph. Darst.},
  year      = {1992},
  language  = {en}
}
@article{Hoettges1990,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; H{\"o}ttges, J{\"o}rg; Rouv{\´e}, Gerhard},
  series = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  journal   = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  publisher = {Delft Hydraulics},
  address   = {Delft},
  year      = {1990},
  language  = {en}
}
@article{Hoettges1992,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation},
  series = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  journal   = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  publisher = {Computational Mechanics Publications [u.a.]},
  address   = {Southampton [u.a.]},
  isbn      = {185312169X},
  year      = {1992},
  language  = {en}
}
@article{Hoettges2017,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {QKan - Management of drainage system data with QGIS},
  series = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  volume    = {17},
  journal   = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  number    = {Article 13},
  pages     = {95 -- 100},
  year      = {2017},
  language  = {en}
}
@inproceedings{HeinzOertelBung2010,
  author    = {Heinz, G. and Oertel, Mario and Bung, Daniel B.},
  title     = {Investigations on a cooling water system for a gas tubine facility concerning air vortexes and sediment transport},
  series = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  booktitle = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  editor    = {Janssen, Robert},
  publisher = {School of Civil Engineering, The University of Queensland},
  address   = {Brisbane},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <3, 2010, Edinburgh>},
  isbn      = {9781742720159},
  pages     = {109 -- 116},
  year      = {2010},
  language  = {en}
}
@article{HagenkampBlankeDoering2021,
  author    = {Hagenkamp, Markus and Blanke, Tobias and D{\"o}ring, Bernd},
  title     = {Thermoelectric building temperature control: a potential assessment},
  series = {International Journal of Energy and Environmental Engineering},
  volume    = {13},
  journal   = {International Journal of Energy and Environmental Engineering},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s40095-021-00424-x},
  pages     = {241 -- 254},
  year      = {2021},
  abstract  = {This study focuses on thermoelectric elements (TEE) as an alternative for room temperature control. TEE are semi-conductor devices that can provide heating and cooling via a heat pump effect without direct noise emissions and no refrigerant use. An efficiency evaluation of the optimal operating mode is carried out for different numbers of TEE, ambient temperatures, and heating loads. The influence of an additional heat recovery unit on system efficiency and an unevenly distributed heating demand are examined. The results show that TEE can provide heat at a coefficient of performance (COP) greater than one especially for small heating demands and high ambient temperatures. The efficiency increases with the number of elements in the system and is subject to economies of scale. The best COP exceeds six at optimal operating conditions. An additional heat recovery unit proves beneficial for low ambient temperatures and systems with few TEE. It makes COPs above one possible at ambient temperatures below 0 ∘C. The effect increases efficiency by maximal 0.81 (from 1.90 to 2.71) at ambient temperature 5 K below room temperature and heating demand Q˙h=100W but is subject to diseconomies of scale. Thermoelectric technology is a valuable option for electricity-based heat supply and can provide cooling and ventilation functions. A careful system design as well as an additional heat recovery unit significantly benefits the performance. This makes TEE superior to direct current heating systems and competitive to heat pumps for small scale applications with focus on avoiding noise and harmful refrigerants.},
  language  = {en}
}
@incollection{GrossHeckenRenz1999,
  author    = {Groß, Rolf Fritz and Hecken, M. and Renz, Ulrich},
  title     = {Hot gas filtration with ceramic filter candles: experimental and numerical investigations on fluid flow during element cleaning},
  series = {High temperature gas cleaning. Vol. 2},
  booktitle = {High temperature gas cleaning. Vol. 2},
  editor    = {Dittler, A. and Hemmer, G. and Kasper, G.},
  publisher = {KIT Institut f{\"u}r Mechanische Verfahrenstechnik und Mechanik},
  address   = {Karlsruhe},
  isbn      = {3-9805220-1-6},
  pages     = {862 -- 873},
  year      = {1999},
  abstract  = {Ceramic hot gas filters are widely used in combined cycles based on pressurised fluidised beds. They fulfil most of the demands with respect to cleaning efficiency and long time durability, but their operation regarding the consumption of pulse gas and energy still has to be optimised. Experimental investigations were carried out to measure the flow field, the pressure and the gas temperature inside the filter candle during pulse jet cleaning. These results are compared with the results of a numerical procedure based on a solution of the two - dimensional conservation equations for momentum and energy. The observed difficulties handling different flow regimes like highly turbulent flow as well as Darcy flow simultaneously are discussed.},
  language  = {en}
}
@article{GosslaSato1998,
  author    = {Gossla, Ulrich and Sato, R.},
  title     = {Present production circumstances of aggregate in Germany / Sato, R.; Gossla, U.},
  series = {Cement \& Concrete (1998)},
  journal   = {Cement \& Concrete (1998)},
  pages     = {146 -- 153},
  year      = {1998},
  language  = {en}
}
@inproceedings{GogolinCarvalhoBungetal.2013,
  author    = {Gogolin, C. and Carvalho, R. and Bung, Daniel B. and Matos, J.},
  title     = {Experimental and numerical investigation of steady and unsteady flows in roughened channels with cross beams},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A10837C},
  year      = {2013},
  language  = {en}
}
@inproceedings{GanegedaraAlahakoonMashfordetal.2012,
  author    = {Ganegedara, H. and Alahakoon, D. and Mashford, J. and Paplinski, A. and M{\"u}ller, Karsten and Deserno, T. M.},
  title     = {Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections},
  series = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  booktitle = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {IEEE Computational Intelligence Society (IEEE-CIS)},
  isbn      = {978-1-4673-1490-9},
  pages     = {8 S.},
  year      = {2012},
  language  = {en}
}
@inproceedings{FellinKingKirschetal.2009,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  booktitle = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla. [u.a.]},
  organization    = {International Conference on Structural Safety and Reliability <10, 2009, Osaka>},
  isbn      = {978-0-415-47557-0},
  pages     = {112 -- 114},
  year      = {2009},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@inproceedings{FeldmannPyschnyDoeringetal.2012,
  author    = {Feldmann, Markus and Pyschny, D. and D{\"o}ring, Bernd and Kuhnhenne, Markus},
  title     = {Life cycle assessment of steel constructions},
  series = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  booktitle = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Symposium on Life-Cycle Civil Engineering <3, 2012, Wien>},
  isbn      = {978-0-203-10336-4},
  pages     = {321},
  year      = {2012},
  language  = {en}
}
@techreport{FeldmannKuhnhenneDoeringetal.2013,
  author    = {Feldmann, M. and Kuhnhenne, M. and D{\"o}ring, Bernd and Pyschny, D. and Lawson, R.M. and Chuter, R.D. and Boudjabeur, S. and Lecomte-Labory, F. and Airaksinen, M. and Heikkinen, J. and Laamanen, J. and Albart, P. and D'Haeyer, R. and Chica, J.A. and Maseda, J.M. and Amundarain, A. and Rips, M.O. and Nu{\~n}ez, J.A. and Mac{\´i}as, O. and Beguin, P. and Ben Larbi, A.},
  title     = {Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-30789-8},
  issn      = {1831-9424},
  doi       = {10.2777/17106},
  pages     = {136 Seiten},
  year      = {2013},
  abstract  = {ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.},
  language  = {en}
}
@incollection{FeldmannDoeringPyschny2016,
  author    = {Feldmann, M. and D{\"o}ring, Bernd and Pyschny, D.},
  title     = {Floor systems; Sustainabilty analyses and assessments of steel bridges},
  series = {Sustainable steel buildings : a practical guide for structures and envelopes},
  booktitle = {Sustainable steel buildings : a practical guide for structures and envelopes},
  publisher = {Wiley Blackwell},
  address   = {Chichester, West Sussex},
  isbn      = {978-1-118-74079-8 (PDF)},
  pages     = {198 -- 223},
  year      = {2016},
  language  = {en}
}
@article{ErpicumCrookstonBombardellietal.2021,
  author    = {Erpicum, Sebastien and Crookston, Brian M. and Bombardelli, Fabian and Bung, Daniel B. and Felder, Stefan and Mulligan, Sean and Oertel, Mario and Palermo, Michele},
  title     = {Hydraulic structures engineering: An evolving science in a changing world},
  series = {Wires Water},
  volume    = {8},
  journal   = {Wires Water},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2049-1948},
  doi       = {10.1002/wat2.1505},
  year      = {2021},
  language  = {en}
}
@inproceedings{DoeringZillerHortmanns2003,
  author    = {D{\"o}ring, Bernd and Ziller, Claudia and Hortmanns, M.},
  title     = {Ventilation of double facades by external dynamic wind pressure},
  series = {11th International Conference on Wind Engineering. 1},
  booktitle = {11th International Conference on Wind Engineering. 1},
  publisher = {The Wind Science and Engineering Research Center},
  address   = {Lubbock, Tex.},
  organization    = {International Conference on Wind Engineering <11, 2003, Lubbock, Tex.>},
  pages     = {721 -- 730},
  year      = {2003},
  language  = {en}
}
@inproceedings{DoeringSedlacek2004,
  author    = {D{\"o}ring, Bernd and Sedlacek, Gerhard},
  title     = {Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems},
  series = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings},
  booktitle = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings},
  publisher = {Danish Steel Inst.},
  address   = {Copenhagen},
  organization    = {Nordic Steel Construction Conference <10, 2004, Copenhagen>},
  pages     = {35 -- 44},
  year      = {2004},
  language  = {en}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@inproceedings{DoeringKuhnhenneFeldmann2011,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Feldmann, Markus},
  title     = {Floor systems - key elements for sustainable multi-storey buildings},
  series = {SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011},
  booktitle = {SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011},
  organization    = {World Sustainable Building Conference <2011, Helsinki>},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@inproceedings{DoeringFeldmannKuhnhenneetal.2008,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and Hellberg, Jan},
  title     = {Implementing a thermal activation system into a light-weight steel deck element},
  series = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...},
  booktitle = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...},
  publisher = {ECCS, European Convention for Construction Steelwork},
  address   = {Brussels},
  organization    = {Eurosteel <5, 2008, Graz>},
  isbn      = {92-0147-000-90},
  pages     = {941 -- 946},
  year      = {2008},
  language  = {en}
}
@inproceedings{DoeringFeldmannKuhnhenne2007,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus},
  title     = {An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests},
  series = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  booktitle = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  address   = {Helsinki},
  isbn      = {978-952-99898-2-9},
  pages     = {1 -- 8},
  year      = {2007},
  language  = {en}
}
@inproceedings{DuranParedesMottaghyHerrmannetal.2020,
  author    = {Duran Paredes, Ludwin and Mottaghy, Darius and Herrmann, Ulf and Groß, Rolf Fritz},
  title     = {Online ground temperature and soil moisture monitoring of a shallow geothermal system with non-conventional components},
  series = {EGU General Assembly 2020},
  booktitle = {EGU General Assembly 2020},
  year      = {2020},
  abstract  = {We present first results from a newly developed monitoring station for a closed loop geothermal heat pump test installation at our campus, consisting of helix coils and plate heat exchangers, as well as an ice-store system. There are more than 40 temperature sensors and several soil moisture content sensors distributed around the system, allowing a detailed monitoring under different operating conditions.In the view of the modern development of renewable energies along with the newly concepts known as Internet of Things and Industry 4.0 (high-tech strategy from the German government), we created a user-friendly web application, which will connect the things (sensors) with the open network (www). Besides other advantages, this allows a continuous remote monitoring of the data from the numerous sensors at an arbitrary sampling rate.Based on the recorded data, we will also present first results from numerical simulations, taking into account all relevant heat transport processes.The aim is to improve the understanding of these processes and their influence on the thermal behavior of shallow geothermal systems in the unsaturated zone. This will in turn facilitate the prediction of the performance of these systems and therefore yield an improvement in their dimensioning when designing a specific shallow geothermal installation.},
  language  = {en}
}
@techreport{ConanD'HaeyerBeguinetal.2006,
  author    = {Conan, Yulian and D'Haeyer, R. and B{\´e}guin, P. and D{\"o}ring, Bernd and Kuhnhenne, Markus and Bayo, E.},
  title     = {Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en},
  publisher = {Office for Official Publications of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-79-02082-X},
  pages     = {200 S.},
  year      = {2006},
  language  = {en}
}
@article{CheenakulaPaulsenOttetal.2023,
  author    = {Cheenakula, Dheeraja and Paulsen, Svea and Ott, Fabian and Gr{\"o}mping, Markus},
  title     = {Operational window of a deammonifying sludge for mainstream application in a municipal wastewater treatment plant},
  series = {Water and Environment Journal},
  journal   = {Water and Environment Journal},
  number    = {Early View},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {1747-6593},
  doi       = {10.1111/wej.12898},
  pages     = {1 -- 12},
  year      = {2023},
  abstract  = {The present work aimed to study the mainstream feasibility of the deammonifying sludge of side stream of municipal wastewater treatment plant (MWWTP) in Kaster, Germany. For this purpose, the deammonifying sludge available at the side stream was investigated for nitrogen (N) removal with respect to the operational factors temperature (15-30°C), pH value (6.0-8.0) and chemical oxygen demand (COD)/N ratio (≤1.5-6.0). The highest and lowest N-removal rates of 0.13 and 0.045 kg/(m³ d) are achieved at 30 and 15°C, respectively. Different conditions of pH and COD/N ratios in the SBRs of Partial nitritation/anammox (PN/A) significantly influenced both the metabolic processes and associated N-removal rates. The scientific insights gained from the current work signifies the possibility of mainstream PN/A at WWTPs. The current study forms a solid basis of operational window for the upcoming semi-technical trails to be conducted prior to the full-scale mainstream PN/A at WWTP Kaster and WWTPs globally.},
  language  = {en}
}
@article{CheenakulaHoffstadtKrafftetal.2022,
  author    = {Cheenakula, Dheeraja and Hoffstadt, Kevin and Krafft, Simone and Reinecke, Diana and Klose, Holger and Kuperjans, Isabel and Gr{\"o}mping, Markus},
  title     = {Anaerobic digestion of algal-bacterial biomass of an Algal Turf Scrubber system},
  series = {Biomass Conversion and Biorefinery},
  volume    = {13},
  journal   = {Biomass Conversion and Biorefinery},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2190-6823},
  doi       = {10.1007/s13399-022-03236-z},
  pages     = {15 Seiten},
  year      = {2022},
  abstract  = {This study investigated the anaerobic digestion of an algal-bacterial biofilm grown in artificial wastewater in an Algal Turf Scrubber (ATS). The ATS system was located in a greenhouse (50°54′19ʺN, 6°24′55ʺE, Germany) and was exposed to seasonal conditions during the experiment period. The methane (CH4) potential of untreated algal-bacterial biofilm (UAB) and thermally pretreated biofilm (PAB) using different microbial inocula was determined by anaerobic batch fermentation. Methane productivity of UAB differed significantly between microbial inocula of digested wastepaper, a mixture of manure and maize silage, anaerobic sewage sludge, and percolated green waste. UAB using sewage sludge as inoculum showed the highest methane productivity. The share of methane in biogas was dependent on inoculum. Using PAB, a strong positive impact on methane productivity was identified for the digested wastepaper (116.4\%) and a mixture of manure and maize silage (107.4\%) inocula. By contrast, the methane yield was significantly reduced for the digested anaerobic sewage sludge (50.6\%) and percolated green waste (43.5\%) inocula. To further evaluate the potential of algal-bacterial biofilm for biogas production in wastewater treatment and biogas plants in a circular bioeconomy, scale-up calculations were conducted. It was found that a 0.116 km2 ATS would be required in an average municipal wastewater treatment plant which can be viewed as problematic in terms of space consumption. However, a substantial amount of energy surplus (4.7-12.5 MWh a-1) can be gained through the addition of algal-bacterial biomass to the anaerobic digester of a municipal wastewater treatment plant. Wastewater treatment and subsequent energy production through algae show dominancy over conventional technologies.},
  language  = {en}
}
@article{CheenakulaGriebelMontagetal.2023,
  author    = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus},
  title     = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives},
  series = {Frontiers in Microbiology},
  volume    = {14},
  journal   = {Frontiers in Microbiology},
  number    = {11155235},
  editor    = {Huang, Xiaowu},
  publisher = {Frontiers},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2023.1155235},
  pages     = {1 -- 15},
  year      = {2023},
  abstract  = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.},
  language  = {en}
}
@incollection{ChansonBungMatos2015,
  author    = {Chanson, Hubert and Bung, Daniel B. and Matos, J.},
  title     = {Stepped spillways and cascades},
  series = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  booktitle = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  publisher = {CRC Press},
  address   = {Boca Raton, Fla. [u.a.]},
  isbn      = {978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)},
  pages     = {45 -- 64},
  year      = {2015},
  language  = {en}
}
@inproceedings{BuehlerLeandroBungetal.2015,
  author    = {B{\"u}hler, P. and Leandro, J. and Bung, Daniel B. and Lopes, P. and Carvalho, R.},
  title     = {Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions},
  series = {2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015},
  booktitle = {2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015},
  organization    = {International Workshop on Hydraulic Structures : Data Validation <2, 2015, Coimbra>},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@article{BungErpicumTullis2020,
  author    = {Bung, Daniel Bernhard and Erpicum, S{\´e}bastien and Tullis, Blanke P.},
  title     = {Advances in hydraulic structures engineering},
  series = {Journal of Hydraulic Engineering},
  volume    = {147},
  journal   = {Journal of Hydraulic Engineering},
  number    = {1},
  publisher = {ASCE},
  address   = {Reston, Va.},
  issn      = {0733-9429 (Druckausgabe)},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001851},
  pages     = {1 Seite},
  year      = {2020},
  language  = {en}
}