@article{SaffeLodewiksHaasetal.1989,
  author    = {Saffe, P. and Lodewiks, J. and Haas, H.-J. and Feigel, H.-J. and Ulrich, H. and Mauer, J. and Ortwig, H. and Dahmann, Peter and Rotth{\"a}user, S. and Tao, J. and Ohlischl{\"a}ger, O. and Scholz, D. and Bergmann, M. and Anders, P.},
  title     = {Neues von ASB Antreiben - Steuern - Bewegen},
  series = {{\"O}lhydraulik und Pneumatik. Vol. 33 (1989), H. 7},
  journal   = {{\"O}lhydraulik und Pneumatik. Vol. 33 (1989), H. 7},
  issn      = {0341-2660},
  pages     = {550 -- 572},
  year      = {1989},
  language  = {de}
}
@article{SchmitzBartzBoehnke1992,
  author    = {Schmitz, G{\"u}nter and Bartz, R. and B{\"o}hnke, P.},
  title     = {Neue Methoden zur Erkennung des ottomotorischen Klopfens},
  series = {Motortechnische Zeitschrift : MTZ. 53 (1992), H. 6},
  journal   = {Motortechnische Zeitschrift : MTZ. 53 (1992), H. 6},
  isbn      = {0024-8525},
  pages     = {286 -- 293},
  year      = {1992},
  language  = {de}
}
@article{FingerGoetten2019,
  author    = {Finger, Felix and G{\"o}tten, Falk},
  title     = {Neue Ans{\"a}tze f{\"u}r die Entwicklung von unbemannten Flugger{\"a}ten},
  series = {Ingenieurspiegel},
  volume    = {2019},
  journal   = {Ingenieurspiegel},
  number    = {1},
  isbn      = {1868-5919},
  pages     = {67 -- 68},
  year      = {2019},
  abstract  = {Wie sieht das unbemannte Flugzeug von {\"U}bermorgen aus? Dieser Frage stellen sich Forscher an der Fachhochschule Aachen. Die weltweit rasant fortschreitende Entwicklung des Marktes f{\"u}r unbemannte Flugger{\"a}te (UAVs - „Unmanned Aerial Vehicles") bietet großes Potenzial f{\"u}r Wachstum und Wertsch{\"o}pfung. Unbemannte fliegende Systeme k{\"o}nnen - f{\"u}r bestimmte Anwendungsgebiete - wesentlich g{\"u}nstiger, kleiner und effizienter ausgelegt werden als bemannte L{\"o}sungen. Dabei sind sich viele Unternehmen {\"u}ber das m{\"o}gliche Potential dieser Technologie noch gar nicht bewusst.},
  language  = {de}
}
@article{KowalskiLinderZierkeetal.2016,
  author    = {Kowalski, Julia and Linder, Peter and Zierke, S. and Wulfen, B. van and Clemens, J. and Konstantinidis, K. and Ameres, G. and Hoffmann, R. and Mikucki, J. and Tulaczyk, S. and Funke, O. and Blandfort, D. and Espe, Clemens and Feldmann, Marco and Francke, Gero and Hiecker, S. and Plescher, Engelbert and Sch{\"o}ngarth, Sarah and Dachwald, Bernd and Digel, Ilya and Artmann, Gerhard and Eliseev, D. and Heinen, D. and Scholz, F. and Wiebusch, C. and Macht, S. and Bestmann, U. and Reineking, T. and Zetzsche, C. and Schill, K. and F{\"o}rstner, R. and Niedermeier, H. and Szumski, A. and Eissfeller, B. and Naumann, U. and Helbing, K.},
  title     = {Navigation technology for exploration of glacier ice with maneuverable melting probes},
  series = {Cold Regions Science and Technology},
  journal   = {Cold Regions Science and Technology},
  number    = {123},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0165-232X},
  doi       = {10.1016/j.coldregions.2015.11.006},
  pages     = {53 -- 70},
  year      = {2016},
  abstract  = {The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.},
  language  = {en}
}
@article{BlomeWilson1996,
  author    = {Blome, Hans-Joachim and Wilson, Thomas L.},
  title     = {Nanotechnology and Orbital Debris},
  series = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  journal   = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  publisher = {The Society},
  address   = {New York},
  isbn      = {0-7844-0177-2},
  pages     = {328 -- 333},
  year      = {1996},
  language  = {en}
}
@article{EschPischingerHagenetal.1998,
  author    = {Esch, Thomas and Pischinger, M. and Hagen, J. and Salber, W.},
  title     = {M{\"o}glichkeiten der ottomotorischen Prozeßf{\"u}hrung bei Verwendung des elektromechanischen Ventiltriebs},
  pages     = {987 -- 1015},
  year      = {1998},
  language  = {de}
}
@article{DachwaldSeboldtRichter2006,
  author    = {Dachwald, Bernd and Seboldt, W. and Richter, L.},
  title     = {Multiple rendezvous and sample return missions to near-Earth objects using solar sailcraft / Dachwald, B. ; Seboldt, W. ; Richter, L.},
  series = {Acta Astronautica. 59 (2006), H. 8-11},
  journal   = {Acta Astronautica. 59 (2006), H. 8-11},
  isbn      = {0094-5765},
  pages     = {768 -- 776},
  year      = {2006},
  language  = {en}
}
@article{DachwaldSeboldtRichter2003,
  author    = {Dachwald, Bernd and Seboldt, W. and Richter, L.},
  title     = {Multiple Rendezvous and Sample Return Missions to Near-Earth Asteroids Using Solar Sailcraft},
  series = {Proceedings of the Fifth IAA International Conference on Low Cost Planetary Missions : 24 - 26 September 2003, ESTEC, Noordwijk, the Netherlands / [comp. by R. A. Harris]},
  journal   = {Proceedings of the Fifth IAA International Conference on Low Cost Planetary Missions : 24 - 26 September 2003, ESTEC, Noordwijk, the Netherlands / [comp. by R. A. Harris]},
  publisher = {ESA},
  address   = {Noordwijk},
  isbn      = {92-9092-853-0},
  pages     = {351 -- 358},
  year      = {2003},
  language  = {en}
}
@article{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple near-earth asteroid rendezvous mission: Solar-sailing options},
  series = {Advances in Space Research},
  journal   = {Advances in Space Research},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2017.10.017},
  year      = {2017},
  language  = {en}
}
@article{DachwaldSeboldt2005,
  author    = {Dachwald, Bernd and Seboldt, W.},
  title     = {Multiple Near-Earth Asteroid Rendezvous and Sample Return Using First Generation Solar Sailcraft},
  series = {Acta Astronautica. 57 (2005), H. 11},
  journal   = {Acta Astronautica. 57 (2005), H. 11},
  isbn      = {0094-5765},
  pages     = {864 -- 875},
  year      = {2005},
  language  = {en}
}
@article{Mertens1998,
  author    = {Mertens, Josef},
  title     = {Multi point design challenges for supersonic transports},
  series = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamics research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  journal   = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamics research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  publisher = {Research and Technology Organization},
  address   = {Neuilly-sur-Seine},
  isbn      = {92-837-1007-X},
  pages     = {8.1 -- 8.12},
  year      = {1998},
  language  = {en}
}
@article{GerhardtSchoenwaldForssmannetal.2005,
  author    = {Gerhardt, Hans Joachim and Sch{\"o}nwald, J. and Forßmann, R. and Große, Wolfgang},
  title     = {Modulation der Windenergie durch optimierte Uferbepflanzung zur Steuerung der Oberfl{\"a}chenstr{\"o}mung f{\"u}r das Entfernung von Treibgut},
  series = {Der F{\"u}hlinger See : Beitr{\"a}ge zur Erhaltung der {\"o}kologischen Qualit{\"a}t / hrsg. von Wolfgang Große ... - ({\"O}kologie und nachhaltige Entwicklung von Sport- und Freizeitseen ; 1)},
  journal   = {Der F{\"u}hlinger See : Beitr{\"a}ge zur Erhaltung der {\"o}kologischen Qualit{\"a}t / hrsg. von Wolfgang Große ... - ({\"O}kologie und nachhaltige Entwicklung von Sport- und Freizeitseen ; 1)},
  publisher = {Monsenstein und Vannerdat},
  address   = {M{\"u}nster},
  isbn      = {3-86582-212-6},
  pages     = {95 -- 108},
  year      = {2005},
  language  = {de}
}
@article{MaiwaldDachwald2010,
  author    = {Maiwald, Volker and Dachwald, Bernd},
  title     = {Mission Design for a Multiple-Rendezvous Mission to Jupiter's Trojans},
  pages     = {3},
  year      = {2010},
  language  = {en}
}
@article{DachwaldWurm2011,
  author    = {Dachwald, Bernd and Wurm, Patrick},
  title     = {Mission analysis and performance comparison for an Advanced Solar Photon Thruster},
  series = {Advances in Space Research},
  volume    = {48},
  journal   = {Advances in Space Research},
  number    = {11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  pages     = {1858 -- 1868},
  year      = {2011},
  language  = {en}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Minimum Transfer Times for Nonperfectly Reflecting Solar Sailcraft},
  series = {Journal of Spacecraft and Rockets. 41 (2004), H. 4},
  journal   = {Journal of Spacecraft and Rockets. 41 (2004), H. 4},
  isbn      = {0022-4650},
  pages     = {693 -- 695},
  year      = {2004},
  language  = {en}
}
@article{GenzKingWahle1992,
  author    = {Genz, M. and King, H. and Wahle, Michael},
  title     = {Mikrozellige Polyurethan-Elastomere als Federelement in Automobilanwendungen},
  series = {Automobiltechnische Zeitschrift ; ATZ},
  volume    = {94},
  journal   = {Automobiltechnische Zeitschrift ; ATZ},
  number    = {10},
  issn      = {0001-2785},
  pages     = {512 -- 520},
  year      = {1992},
  language  = {de}
}
@article{WittmannSchmidtFeuerbacher1988,
  author    = {Wittmann, Klaus and Schmidt, H. P. and Feuerbacher, B.},
  title     = {Microgravity research and user support in the Space Station era: The Microgravity User Support Centre},
  series = {Acta Astronautica. 17 (1988), H. 11-12},
  journal   = {Acta Astronautica. 17 (1988), H. 11-12},
  isbn      = {0094-5765},
  pages     = {1161 -- 1168},
  year      = {1988},
  language  = {en}
}
@article{CampenKowalskiLyonsetal.2019,
  author    = {Campen, R. and Kowalski, Julia and Lyons, W.B. and Tulaczyk, S. and Dachwald, Bernd and Pettit, E. and Welch, K. A. and Mikucki, J.A.},
  title     = {Microbial diversity of an Antarctic subglacial community and high-resolution replicate sampling inform hydrological connectivity in a polar desert},
  series = {Environmental Microbiology},
  journal   = {Environmental Microbiology},
  number    = {accepted article},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1462-2920},
  doi       = {10.1111/1462-2920.14607},
  year      = {2019},
  language  = {en}
}
@article{SchildtBraunMarzocca2019,
  author    = {Schildt, Ph. and Braun, Carsten and Marzocca, P.},
  title     = {Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1869-5590},
  doi       = {10.1007/s13272-019-00411-3},
  pages     = {1 -- 14},
  year      = {2019},
  language  = {en}
}
@article{SchmitzPischinger1997,
  author    = {Schmitz, G{\"u}nter and Pischinger, M.},
  title     = {Mechatronische Simulation eines EMV- Aktuators},
  series = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  journal   = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  publisher = {Heinz-Nixdorf-Inst., Univ.-GH Paderborn},
  address   = {Paderborn},
  isbn      = {3-931466-22-1},
  pages     = {69 -- 83},
  year      = {1997},
  language  = {de}
}
@article{Schmitz2004,
  author    = {Schmitz, G{\"u}nter},
  title     = {Mechatronic Systems Simulation as an obligatory module for Mechatronic Master Students},
  series = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  journal   = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-50-X},
  pages     = {1278},
  year      = {2004},
  language  = {en}
}
@article{StiemerThomaBraun2023,
  author    = {Stiemer, Luc Nicolas and Thoma, Andreas and Braun, Carsten},
  title     = {MBT3D: Deep learning based multi-object tracker for bumblebee 3D flight path estimation},
  series = {PLoS ONE},
  volume    = {18},
  journal   = {PLoS ONE},
  number    = {9},
  publisher = {PLOS},
  address   = {San Fancisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0291415},
  pages     = {e0291415},
  year      = {2023},
  abstract  = {This work presents the Multi-Bees-Tracker (MBT3D) algorithm, a Python framework implementing a deep association tracker for Tracking-By-Detection, to address the challenging task of tracking flight paths of bumblebees in a social group. While tracking algorithms for bumblebees exist, they often come with intensive restrictions, such as the need for sufficient lighting, high contrast between the animal and background, absence of occlusion, significant user input, etc. Tracking flight paths of bumblebees in a social group is challenging. They suddenly adjust movements and change their appearance during different wing beat states while exhibiting significant similarities in their individual appearance. The MBT3D tracker, developed in this research, is an adaptation of an existing ant tracking algorithm for bumblebee tracking. It incorporates an offline trained appearance descriptor along with a Kalman Filter for appearance and motion matching. Different detector architectures for upstream detections (You Only Look Once (YOLOv5), Faster Region Proposal Convolutional Neural Network (Faster R-CNN), and RetinaNet) are investigated in a comparative study to optimize performance. The detection models were trained on a dataset containing 11359 labeled bumblebee images. YOLOv5 reaches an Average Precision of AP = 53, 8\%, Faster R-CNN achieves AP = 45, 3\% and RetinaNet AP = 38, 4\% on the bumblebee validation dataset, which consists of 1323 labeled bumblebee images. The tracker's appearance model is trained on 144 samples. The tracker (with Faster R-CNN detections) reaches a Multiple Object Tracking Accuracy MOTA = 93, 5\% and a Multiple Object Tracking Precision MOTP = 75, 6\% on a validation dataset containing 2000 images, competing with state-of-the-art computer vision methods. The framework allows reliable tracking of different bumblebees in the same video stream with rarely occurring identity switches (IDS). MBT3D has much lower IDS than other commonly used algorithms, with one of the lowest false positive rates, competing with state-of-the-art animal tracking algorithms. The developed framework reconstructs the 3-dimensional (3D) flight paths of the bumblebees by triangulation. It also handles and compares two alternative stereo camera pairs if desired.},
  language  = {en}
}
@article{Kowalski2008,
  author    = {Kowalski, Julia},
  title     = {Mathematische Murgangmodellierung},
  series = {Newsletter Naturgefahren},
  volume    = {2008},
  journal   = {Newsletter Naturgefahren},
  number    = {2},
  organization    = {Eidgen{\"o}ssisches Institut f{\"u}r Schnee-und Lawinenforschung SLF},
  pages     = {4 -- 5},
  year      = {2008},
  language  = {de}
}
@article{FingerGoettenBraunetal.2020,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten and Bil, Cees},
  title     = {Mass, primary energy, and cost: the impact of optimization objectives on the initial sizing of hybrid-electric general aviation aircraft},
  series = {CEAS Aeronautical Journal},
  volume    = {2020},
  journal   = {CEAS Aeronautical Journal},
  number    = {11},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1869-5590},
  doi       = {10.1007/s13272-020-00449-8},
  pages     = {713 -- 730},
  year      = {2020},
  abstract  = {For short take-off and landing (STOL) aircraft, a parallel hybrid-electric propulsion system potentially offers superior performance compared to a conventional propulsion system, because the short-take-off power requirement is much higher than the cruise power requirement. This power-matching problem can be solved with a balanced hybrid propulsion system. However, there is a trade-off between wing loading, power loading, the level of hybridization, as well as range and take-off distance. An optimization method can vary design variables in such a way that a minimum of a particular objective is attained. In this paper, a comparison between the optimization results for minimum mass, minimum consumed primary energy, and minimum cost is conducted. A new initial sizing algorithm for general aviation aircraft with hybrid-electric propulsion systems is applied. This initial sizing methodology covers point performance, mission performance analysis, the weight estimation process, and cost estimation. The methodology is applied to the design of a STOL general aviation aircraft, intended for on-demand air mobility operations. The aircraft is sized to carry eight passengers over a distance of 500 km, while able to take off and land from short airstrips. Results indicate that parallel hybrid-electric propulsion systems must be considered for future STOL aircraft.},
  language  = {en}
}
@article{GerhardtKorath2004,
  author    = {Gerhardt, Hans Joachim and Korath, Bernd},
  title     = {Maschinelle Rauchableitung in besonderen Bauarten},
  series = {vfdb-Zeitschrift. 53 (2004), H. 4},
  journal   = {vfdb-Zeitschrift. 53 (2004), H. 4},
  isbn      = {0042-1804},
  pages     = {198 -- 204},
  year      = {2004},
  language  = {de}
}
@article{OttenWeberArent2018,
  author    = {Otten, Dennis and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation - On Its Way to Industrial Application},
  series = {International Journal of Aviation, Aeronautics, and Aerospace},
  volume    = {5},
  journal   = {International Journal of Aviation, Aeronautics, and Aerospace},
  number    = {2},
  publisher = {Embry-Riddle Aeronautical University},
  address   = {Daytona Beach, Fla.},
  issn      = {2374-6793},
  doi       = {10.15394/ijaaa.2018.1217},
  year      = {2018},
  abstract  = {Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale.},
  language  = {en}
}
@article{DachwaldSeboldtLoebetal.2008,
  author    = {Dachwald, Bernd and Seboldt, W. and Loeb, H. W and Schartner, K.-H.},
  title     = {Main Belt Asteroid Sample Return Mission Using Solar Electric Propulsion},
  series = {Acta Astronautica. 63 (2008), H. 1-4},
  journal   = {Acta Astronautica. 63 (2008), H. 1-4},
  isbn      = {0094-5765},
  pages     = {91 -- 101},
  year      = {2008},
  language  = {en}
}
@article{FornaciariGuidettiHavermannetal.2010,
  author    = {Fornaciari, Andrea and Guidetti, Marco and Havermann, Marc and Lettini, Antonio},
  title     = {Maccine mobili pi{\`u} efficienti},
  series = {Fluidotecnica},
  journal   = {Fluidotecnica},
  number    = {345},
  publisher = {Quine Business Publisher},
  address   = {Milano},
  pages     = {11 -- 14},
  year      = {2010},
  abstract  = {Secondo le attuali normative tutte le macchine mobili, entro il 2012, dovranno essere soggette a un incremento di efficienza energetica. Un'evoluzione del sistema idraulico potr{\`a} contribuire in maniera significativa al miglioramento richiesto. Elettronica e idraulica sempre pi{\`u} protagoniste.},
  language  = {it}
}
@article{Gerhardt1994,
  author    = {Gerhardt, Hans Joachim},
  title     = {L{\"o}sungskonzept zur Bel{\"u}ftung von Rottehallen},
  series = {Abfallwirtschaftsjournal. 6 (1994), H. 10},
  journal   = {Abfallwirtschaftsjournal. 6 (1994), H. 10},
  isbn      = {0934-6422},
  pages     = {689 -- 692},
  year      = {1994},
  language  = {de}
}
@article{Gerhardt1994,
  author    = {Gerhardt, Hans Joachim},
  title     = {Lufttechnische Pr{\"u}fungen von Abz{\"u}gen - Kritische Anmerkungen zur Pr{\"u}fvorschrift DIN 12 924 Teil 1},
  series = {GIT Spezial: Arbeitschutz (1994)},
  journal   = {GIT Spezial: Arbeitschutz (1994)},
  isbn      = {0940-032X},
  pages     = {90 -- 95},
  year      = {1994},
  language  = {de}
}
@article{EschPischingerGoebel1996,
  author    = {Esch, Thomas and Pischinger, M. and G{\"o}bel, T.},
  title     = {Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung},
  series = {Motortechnische Zeitschrift. 57 (1996), H. 2},
  journal   = {Motortechnische Zeitschrift. 57 (1996), H. 2},
  isbn      = {0024-8525},
  pages     = {106 -- 115},
  year      = {1996},
  language  = {de}
}
@article{Mertens2006,
  author    = {Mertens, Josef},
  title     = {Luft hat keine Balken, aber enorme Kr{\"a}fte : Aerodynamik - die unsichtbare Kraft},
  series = {HEmagazin : das Hocheffizienz-Magazin von Wilo. 2006 (2006), H. 1},
  journal   = {HEmagazin : das Hocheffizienz-Magazin von Wilo. 2006 (2006), H. 1},
  publisher = {-},
  pages     = {4 -- 9},
  year      = {2006},
  language  = {de}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Low-Thrust Trajectory Optimization and Interplanetary Mission Analysis Using Evolutionary Neurocontrol},
  series = {Deutscher Luft- und Raumfahrtkongress 2004 : Dresden, 20. bis 23. September 2004, Motto: Luft- und Raumfahrt - Br{\"u}cke f{\"u}r eine wissensbasierte Gesellschaft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 2. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)},
  journal   = {Deutscher Luft- und Raumfahrtkongress 2004 : Dresden, 20. bis 23. September 2004, Motto: Luft- und Raumfahrt - Br{\"u}cke f{\"u}r eine wissensbasierte Gesellschaft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 2. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)},
  address   = {Bonn},
  pages     = {917 -- 926},
  year      = {2004},
  language  = {en}
}
@article{DachwaldCarnelliVasile2006,
  author    = {Dachwald, Bernd and Carnelli, I. and Vasile, M.},
  title     = {Low-Thrust Gravity Assist Trajectory Optimization Using Evolutionary Neurocontrollers / I. Carnelli ; B. Dachwald ; M. Vasile ...},
  series = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  journal   = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  publisher = {Univelt},
  address   = {San Diego, Calif.},
  isbn      = {0-87703-527-X},
  pages     = {1911 -- 1928},
  year      = {2006},
  language  = {en}
}
@article{FunkeBoernerRobinsonetal.2010,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Robinson, A. and Hendrick, P. and Recker, E.},
  title     = {Low NOx H2 combustion for industrial gas turbines of various power ranges},
  series = {5th International Gas Turbine Conference ETN-IGTC, ETN-2010-42, Brussels, Belgium, October 2010},
  journal   = {5th International Gas Turbine Conference ETN-IGTC, ETN-2010-42, Brussels, Belgium, October 2010},
  year      = {2010},
  language  = {en}
}
@article{MathiakPlescherWillnecker2005,
  author    = {Mathiak, Gerhard and Plescher, Engelbert and Willnecker, Rainer},
  title     = {Liquid metal diffusion experiments in microgravity - Vibrational effects},
  series = {Measurement science and technology},
  volume    = {Vol. 16},
  journal   = {Measurement science and technology},
  number    = {No. 2},
  issn      = {0957-0233},
  doi       = {10.1088/0957-0233/16/2/003},
  pages     = {336},
  year      = {2005},
  language  = {en}
}
@article{GerhardtKonrath2002,
  author    = {Gerhardt, Hans Joachim and Konrath, Bernd},
  title     = {Linienhafte Absaugung von Rauchgasen},
  series = {vfdb-Zeitschrift. 51 (2002), H. 1},
  journal   = {vfdb-Zeitschrift. 51 (2002), H. 1},
  isbn      = {0042-1804},
  pages     = {33 -- 36},
  year      = {2002},
  language  = {de}
}
@article{BlomeKundt1988,
  author    = {Blome, Hans-Joachim and Kundt, Wolfgang},
  title     = {Leptonic jets from young stellar objects?},
  series = {Astrophysics and Space Science. 148 (1988), H. 2},
  journal   = {Astrophysics and Space Science. 148 (1988), H. 2},
  isbn      = {0004-640X},
  pages     = {343 -- 361},
  year      = {1988},
  language  = {en}
}
@article{Dahmann1990,
  author    = {Dahmann, Peter},
  title     = {Leistungsf{\"a}higkeit von Hydraulikfiltern bei unterschiedlichen Betriebsbedingungen},
  series = {{\"O}lhydraulik und Pneumatik. 34 (1990), H. 10},
  journal   = {{\"O}lhydraulik und Pneumatik. 34 (1990), H. 10},
  isbn      = {0341-2660},
  pages     = {682 -- 688},
  year      = {1990},
  language  = {de}
}
@article{WeiheAnsgarRoethetal.2013,
  author    = {Weihe, Stefan and Ansgar, Ernst and R{\"o}th, Thilo and Proksch, Johannes},
  title     = {Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau},
  series = {Lightweight Design},
  volume    = {6},
  journal   = {Lightweight Design},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8738 (Online)},
  pages     = {38 -- 43},
  year      = {2013},
  abstract  = {In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH \& Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden am Beispiel des vorderen Dachquertr{\"a}gers des Mercedes-Benz Viano/Vito ausf{\"u}hrlich untersucht.},
  language  = {de}
}
@article{WittmannUlamecRichter1999,
  author    = {Wittmann, Klaus and Ulamec, S and Richter, L},
  title     = {Lander Systems for Planetary Missions},
  series = {Laboratory astrophysics and space research / ed. by P. Ehrenfreund},
  journal   = {Laboratory astrophysics and space research / ed. by P. Ehrenfreund},
  publisher = {Kluwer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-5338-2},
  pages     = {597 -- 621},
  year      = {1999},
  language  = {en}
}
@article{Mertens1992,
  author    = {Mertens, Josef},
  title     = {Laminar flow for supersonic transports},
  series = {Proceedings : March 16 - 18, 1992, Congress Centrum, Hamburg, Federal Republic of Germany / organized jointly by: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt e.V. ... [Programme committee J. Szodruch ...]},
  journal   = {Proceedings : March 16 - 18, 1992, Congress Centrum, Hamburg, Federal Republic of Germany / organized jointly by: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt e.V. ... [Programme committee J. Szodruch ...]},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {3-922010-73-3},
  pages     = {319 -- 323},
  year      = {1992},
  language  = {en}
}
@article{GerhardtJung1991,
  author    = {Gerhardt, Hans Joachim and Jung, O.},
  title     = {Lagesicherheit mechanisch befestigter Dachabdichtungen bei Windbelastung},
  series = {Die Bautechnik. 68 (1991), H. 11},
  journal   = {Die Bautechnik. 68 (1991), H. 11},
  isbn      = {0005-6820},
  pages     = {372 -- 377},
  year      = {1991},
  language  = {de}
}
@article{GerhardtBofahKramer1990,
  author    = {Gerhardt, Hans Joachim and Bofah, K.-K. and Kramer, C.},
  title     = {Lagesicherheit lose verlegter W{\"a}rmed{\"a}mmplatten auf Flachd{\"a}chern},
  series = {Die Bautechnik. 67 (1990), H. 2},
  journal   = {Die Bautechnik. 67 (1990), H. 2},
  isbn      = {0005-6820},
  pages     = {55 -- 60},
  year      = {1990},
  language  = {de}
}
@article{BullerschenWilhelmi1990,
  author    = {Bullerschen, Klaus-Gerd and Wilhelmi, Herbert},
  title     = {K{\"u}hlung von Lichtbogenofenelektroden durch W{\"a}rmerohre},
  series = {Stahl und Eisen. 110 (1990), H. 8},
  journal   = {Stahl und Eisen. 110 (1990), H. 8},
  isbn      = {0378-7559},
  pages     = {91 -- 98},
  year      = {1990},
  language  = {de}
}
@article{Blome2002,
  author    = {Blome, Hans-Joachim},
  title     = {Kosmologie: Geschichte des Kosmos und Extrapolationen in die Zukunft},
  series = {Der Mensch im Kosmos. 3. ; Berichtsband eines Workshops vom 19. bis 21. April 2001, Kurverwaltung, Medienzentrum Bad Oeynhausen : Der Mensch im Kosmos / Peter R. Sahm ; Gerhard P. J. Thiele (Hrsg.)},
  journal   = {Der Mensch im Kosmos. 3. ; Berichtsband eines Workshops vom 19. bis 21. April 2001, Kurverwaltung, Medienzentrum Bad Oeynhausen : Der Mensch im Kosmos / Peter R. Sahm ; Gerhard P. J. Thiele (Hrsg.)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-9737-0},
  pages     = {319 S. : Ill., graph. Darst.},
  year      = {2002},
  language  = {de}
}
@article{BlomeHoellPriester2002,
  author    = {Blome, Hans-Joachim and Hoell, Josef and Priester, Wolfgang},
  title     = {Kosmologie},
  series = {Sterne und Weltraum : [enth{\"a}lt 45 Tab.] / Hrsg.: Wilhelm Raith. Autoren: Hans Joachim Blome ... 2., stark erw. und aktualisierte Aufl.},
  journal   = {Sterne und Weltraum : [enth{\"a}lt 45 Tab.] / Hrsg.: Wilhelm Raith. Autoren: Hans Joachim Blome ... 2., stark erw. und aktualisierte Aufl.},
  publisher = {de Gruyter},
  address   = {Berlin [u.a.]},
  isbn      = {3-11-016866-9},
  pages     = {439 -- 582},
  year      = {2002},
  language  = {de}
}
@article{BillerbeckBarnatKnutzen2016,
  author    = {Billerbeck, Katrin and Barnat, Miriam and Knutzen, S{\"o}nke},
  title     = {Kompetenzorientierung auf dem Pr{\"u}fstand. Erprobung von Indikatoren f{\"u}r den Kulturwandel},
  series = {Die Hochschullehre},
  volume    = {2016},
  journal   = {Die Hochschullehre},
  number    = {16},
  publisher = {WBV Media},
  address   = {Bielefeld},
  issn      = {2199-8825},
  doi       = {10.3278/HSL1616W},
  pages     = {16},
  year      = {2016},
  abstract  = {Der Beitrag fokussiert die Frage nach dem Stand des durch die Bologna-Reform angestoßenen Kulturwandels im Hinblick auf Kompetenzorientierung am Beispiel der Technischen Universit{\"a}t Hamburg (TUHH). An der TUHH wird bereits seit einigen Jahren daran gearbeitet, die Lehre grundlegend neu auszurichten. Hierf{\"u}r setzt das hochschuldidaktische "Zentrum f{\"u}r Lehre und Lernen" (ZLL) verschiedene Maßnahmen ein, wie z.B. eine finanzielle und didaktische Unterst{\"u}tzung von Lehrenden bei der Umstellung ihrer Veranstaltungen, Weiterqualifizierungsangebote und Informationsmaterial. Die Maßnahmen ebenso wie die innovierten Veranstaltungen werden von Lehrenden und Studierenden gut evaluiert. Nach dem Ansatz des Constructive Alignments l{\"a}sst sich jedoch davon ausgehen, dass der Bereich der Pr{\"u}fungen f{\"u}r eine Einsch{\"a}tzung des Status Quo der Kompetenzorientierung besonders relevant ist. Dieser wird deshalb anhand der beiden Kriterien Pr{\"u}fungsformate und Schwierigkeitsstufen von Pr{\"u}fungsaufgaben n{\"a}her beleuchtet, die eng mit der Kompetenzorientierung zusammen h{\"a}ngen. Ergebnisse hierzu aus einer universit{\"a}tsweiten Datenbank zur Studienorganisation sowie aus einer Online-Umfrage unter Studierenden weisen darauf hin, dass das Pr{\"u}fungsformat "Klausur" nach wie vor am st{\"a}rksten verbreitet ist; zugleich sind die Studierenden nach einer Selbsteinsch{\"a}tzung in Pr{\"u}fungen vorrangig mit Aufgaben auf den Taxonomieniveaus "Wiedergeben" und "Anwenden" konfrontiert. Dies l{\"a}sst sich als Hinweis darauf interpretieren, dass es im Hinblick auf eine Kompetenzorientierung in den Pr{\"u}fungen noch weiteren Ver{\"a}nderungsbedarf gibt.},
  language  = {de}
}
@article{DachwaldUlamecPostbergetal.2020,
  author    = {Dachwald, Bernd and Ulamec, Stephan and Postberg, Frank and Sohl, Frank and Vera, Jean-Pierre de and Christoph, Waldmann and Lorenz, Ralph D. and Hellard, Hugo and Biele, Jens and Rettberg, Petra},
  title     = {Key technologies and instrumentation for subsurface exploration of ocean worlds},
  series = {Space Science Reviews},
  volume    = {216},
  journal   = {Space Science Reviews},
  number    = {Art. 83},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1572-9672},
  doi       = {10.1007/s11214-020-00707-5},
  pages     = {45},
  year      = {2020},
  abstract  = {In this chapter, the key technologies and the instrumentation required for the subsurface exploration of ocean worlds are discussed. The focus is laid on Jupiter's moon Europa and Saturn's moon Enceladus because they have the highest potential for such missions in the near future. The exploration of their oceans requires landing on the surface, penetrating the thick ice shell with an ice-penetrating probe, and probably diving with an underwater vehicle through dozens of kilometers of water to the ocean floor, to have the chance to find life, if it exists. Technologically, such missions are extremely challenging. The required key technologies include power generation, communications, pressure resistance, radiation hardness, corrosion protection, navigation, miniaturization, autonomy, and sterilization and cleaning. Simpler mission concepts involve impactors and penetrators or - in the case of Enceladus - plume-fly-through missions.},
  language  = {en}
}
@article{HavermannMoeglin2005,
  author    = {Havermann, Marc and Moeglin, J.-P.},
  title     = {ISL's Research on Systems with Controlled Effects for Non-Lethal Applications / Moeglin, J.-P. ; Havermann, M. et al.},
  series = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  journal   = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  publisher = {ICT},
  address   = {Pfinztal},
  pages     = {getr. Z{\"a}hlung [ca. 600 S.]},
  year      = {2005},
  language  = {en}
}