@article{StollenwerkReinkensmeierGeorgetal.2021, author = {Stollenwerk, Dominik and Reinkensmeier, Sebastian and Georg, J{\"o}rg Heiner and Jungbluth, Christian}, title = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 2: USER-Verhalten und -Erwartungen}, series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt}, volume = {71}, journal = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt}, number = {3}, publisher = {ETV Energieverlag}, address = {Essen}, isbn = {0720-6240}, issn = {0013-743X}, pages = {38 -- 42}, year = {2021}, language = {de} } @article{GeorgStollenwerkReinkensmeieretal.2021, author = {Georg, J{\"o}rg Heiner and Stollenwerk, Dominik and Reinkensmeier, Sebastian and Jungbluth, Christian}, title = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 1: Quo vadis, Marktdesign?}, series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt}, volume = {71}, journal = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt}, number = {1/2}, publisher = {ETV Energieverlag}, address = {Essen}, isbn = {0720-6240}, issn = {0013-743X}, pages = {64 -- 69}, year = {2021}, language = {de} } @masterthesis{Hirt2021, type = {Bachelor Thesis}, author = {Hirt, Miriam}, title = {Zwei sind eine Gemeinschaft: Illustrative Neuinterpretation des Romans "Eine Insel" von T. Pratchett}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {143 Seiten}, year = {2021}, abstract = {Das Projekt „Zwei sind eine Gemeinschaft" befasst sich mit der Entwicklung einer gebundenen Fassung der Graphic Novel als Adaption des Kinderromans „Eine Insel" von Terry Pratchett. Diese soll den Betrachtenden erm{\"o}glichen, mittels ansprechenden Illustrationen tiefer in die fantasievolle Welt der Geschichte einzutauchen, dem Alltag zu entfliehen und so die Begeisterung zum Medium Buch wieder aufleben zu lassen. Durch die Verbindung von Techniken des Grafikdesigns und der klassischen Illustration verbindet der Stil sowohl die moderne, ausdrucksstarke und sehr grafische Bildsprache mit der Eigenschaft, kreativen Interpretationsspielraum zu lassen und tiefe Emotionen zu erzeugen. Die besondere Innovation des Projekts zeigt sich durch das Konzept des illustrativen Baukastensystems, welches erm{\"o}glicht, die einzelnen Illustrationen effizient und intuitiv zu gestalten.}, language = {de} } @incollection{Kurz2021, author = {Kurz, Melanie}, title = {Zur Multikausalit{\"a}t von Designentscheidungen - eine Beispielsammlung}, series = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, booktitle = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-353-6}, pages = {22 -- 43}, year = {2021}, language = {de} } @masterthesis{Spomer2021, type = {Bachelor Thesis}, author = {Spomer, Ruth}, title = {Zoologisches Forschungsmuseum Alexander K{\"o}nig : Entwicklung eines neuen Erscheinungsbildes}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {139 Seiten}, year = {2021}, abstract = {Artenvielfalt erforschen und erkl{\"a}ren - So lautet der Leitsatz des Bonner Forschungsmuseums. Durch inszenierte Lebensr{\"a}ume sowie beeindruckende sammlungsbasierte Ausstellungen werden komplexe biologische Ph{\"a}nomene erkl{\"a}rt und die Biodiversit{\"a}tsforschung f{\"u}r ein breites Publikum zug{\"a}nglich gemacht. Dabei wird das {\"u}bergeordnete Ziel verfolgt, das Interesse der Allgemeinheit an zoologischer Wissenschaft zu wecken. Das neue Erscheinungsbild schafft Wiedererkennbarkeit und positioniert das Museum als wissenschaftliche Institution. Dabei stellt die Verkn{\"u}pfung des Forschungsaspektes und der Artenvielfalt die Basis der Gestaltung dar und kommuniziert die wesentlichen Inhalte. Zudem sorgt ein medien{\"u}bergreifendes Ordnungssystem f{\"u}r eine bessere {\"U}bersicht und erleichtert den Zugang zu komplexen Inhalten. So erh{\"a}lt das Museum eine spannendere, attraktivere Wirkung nach Außen und eine bessere Orientierung im Inneren.}, language = {de} } @masterthesis{Kemmerling2021, type = {Bachelor Thesis}, author = {Kemmerling, Kristin}, title = {Zeitreisen: Interaktiv erlebbarer Raum zur Vermittlung von historischem Wissen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {60 Seiten}, year = {2021}, abstract = {Das Ziel des Konzeptes ist eine virtuelle personalisierte „Zeitreise" f{\"u}r die Besucher*innen zu gestalten. Die Ausstellung l{\"a}sst die Besucher*innen in ein vergangenes Zeitszenario eintauchen. Sie erleben und erkunden mit Hilfe von Computertechniken historische Ereignisse, w{\"a}hrend sie gleichzeitig n{\"u}tzliches Wissen vermittelt bekommen. Die Ausstellung besteht aus einer inszenierten interaktiven Raum-Installation mit 360 Grad Projektionen. Das 360 Grad Panorama erlaubt den Besucher*innen eine neue Art der Wahrnehmung von historischen Ereignissen. Alle Besucher*innen bekommen zu Beginn der Tour ein Smart Device (Tablet) mit einem vor installierten Benutzer Guide ausgeh{\"a}ndigt. Die Anwendungen sind Schritt f{\"u}r Schritt im Guide veranschaulicht und leicht anzuwenden. Sprachen, Schriften, Display Gr{\"o}ßen k{\"o}nnen jederzeit ge{\"a}ndert und Hilfe angefordert werden. Damit wird die Ausstellung barrierefrei. Mit Hilfe des neuen Benutzer Guides Systems sind alle Besucher*innen in der Lage vor der Tour eine kurze „Personalisierung" durchzuf{\"u}hren. Somit wird auf Basis der Interessenfelder eine individuelle „Zeitreise „ erm{\"o}glicht. Die dargestellten Szenarien k{\"o}nnen u.a. zwischen den historischen Maya Tempelruinen, Pyramiden, historischen Mythen, wie dem legend{\"a}ren Bernsteinzimmer variieren. Mit diesem Konzept ist es m{\"o}glich, l{\"a}ngst vergessene und zerst{\"o}rte Zeitszenarien zu rekonstruieren und diese mit Hilfe von Virtual Reality- und Augmented Reality Elementen interaktiv zu gestalten.}, language = {de} } @masterthesis{Franken2021, type = {Bachelor Thesis}, author = {Franken, Florian}, title = {Zeitfenster: Eine Dorfgeschichte aus Bildcollagen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {113 Seiten}, year = {2021}, abstract = {Die Zeit befindet sich im st{\"a}ndigen Wandel. Mit ihr verbindet man Zukunft, Vergangenheit und Gegenwart. Letzteres pr{\"a}gt das jetzige Dasein. Der Zeitwandel ist ein Prozess, {\"u}ber den wir uns meist erst nach Jahren bewusstwerden. Besonders, wenn man das Dorf, in welchem man aufgewachsen ist, n{\"a}her betrachtet, f{\"a}llt einem auf, was sich im Laufe der Jahre architektonisch oder infrastrukturell ver{\"a}ndert hat. So stellt sich die Frage, wie das Dorf im letzten Jahrhundert ausgesehen hat. Wie sah es vor, w{\"a}hrend und nach den beiden Weltkriegen aus? Wie war das Dorfleben in der Zwischenkriegszeit? Was hat sich im letzten Jahrhundert ver{\"a}ndert? Diese Arbeit zeigt den Wandel der Zeit, kombiniert aus Vergangenheit und Gegenwart. Damalige Aufnahmeorte wurden erneut aufgesucht, die Fotos aus der gleichen Position wurden neu abgelichtet und miteinander kombiniert.}, language = {de} } @masterthesis{Mauve2021, type = {Bachelor Thesis}, author = {Mauve, Ira}, title = {YOKU: Ein Therapieprodukt f{\"u}r Fasziale Verklebungen und Muskel- Skelett-Erkrankungen.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {125 Seiten}, year = {2021}, abstract = {Yocu ist ein Konzept f{\"u}r den Gesundheitssektor, dass unter der Betrachtung der relevanten Trends und der Researchergebnisse den Therapieansatz des „Schr{\"o}pfen" in einen neuen modernen Kontext setzt, dabei aber die Vorteile der traditionellen Heilkunst nicht außer Acht l{\"a}sst. Es handelt sich um ein Therapieprodukt f{\"u}r fasziale Verklebungen und Muskel-Skelett-Erkrankungen. Mit Yocu bekommen Nutzer die M{\"o}glichkeit, sich selbst erfolgreich pr{\"a}ventiv oder bei Beschwerden zu behandeln. Das k{\"o}nnte nicht nur die k{\"o}rperliche Gesundheit f{\"o}rdern, sondern auch das Gesp{\"u}r f{\"u}r den eigenen K{\"o}rper. Seine k{\"o}rperlichen Bed{\"u}rfnisse besser einsch{\"a}tzen zu k{\"o}nnen und in der Lage zu sein, diese zu erf{\"u}llen, stellt das Ziel des Konzepts dar. Mit dem gew{\"a}hlten „Healthtech" Ansatz soll der Zugang zur Selbsttherapie f{\"u}r Laien erm{\"o}glicht werden. Zus{\"a}tzlich k{\"o}nnte das Konzept die Arbeit f{\"u}r Physiotherapeut:innen und Fitnesstrainer:innen erleichtern. Durch die Symbiose eines elektronischen Therapieproduktes mit einer Anwendungsapp ist die Behandlung punktgenau steuerbar und basiert nicht mehr ausschließlich auf Gef{\"u}hl oder Erfahrung. Durch die Einsicht aller wichtigen Parameter, wird das Verst{\"a}ndnis der Therapiemethode gef{\"o}rdert und Vertrauen hinsichtlich des Produkts geschaffen.}, language = {de} } @book{Feuerriegel2021, author = {Feuerriegel, Uwe}, title = {W{\"a}rme{\"u}bertragung mit EXCEL und VBA: W{\"a}rmetechnische Berechnungen und Simulationen effektiv durchf{\"u}hren und professionell dokumentieren}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-35905-8}, doi = {10.1007/978-3-658-35906-5}, pages = {XX, 439 Seiten}, year = {2021}, abstract = {Dieses Lehrbuch vermittelt die Grundlagen der W{\"a}rme{\"u}bertragung sowie den Umgang mit EXCEL-VBA von der Erstellung von Makros bis zu benutzerdefinierten Funktionen. Es legt damit eine Basis f{\"u}r die schnelle und professionelle Durchf{\"u}hrung von Berechnungen und Simulationen. Die angeleitete Erstellung von Berechnungsmodulen mit EXCEL und VBA aus allen wichtigen Bereichen der W{\"a}rme{\"u}bertragung bildet den inhaltlichen Schwerpunkt. Dazu z{\"a}hlen die station{\"a}re W{\"a}rmeleitung und der station{\"a}re W{\"a}rmedurchgang, die instation{\"a}re W{\"a}rmeleitung, der W{\"a}rme{\"u}bergang bei freier und erzwungener Konvektion sowie die W{\"a}rmestrahlung und der W{\"a}rme{\"u}bergang beim Kondensieren und Sieden. Soweit sinnvoll und m{\"o}glich werden die Stoffwertekorrelationen und die Berechnungsvorschriften aus dem VDI-W{\"a}rmeatlas verwendet. F{\"u}r ausgew{\"a}hlte Anwendungen werden zudem komplexere Auslegungen und Simulationen von Prozessen der W{\"a}rme{\"u}bertragung sowie von W{\"a}rme{\"u}bertragern erstellt. Die Zielgruppen: Studierende in Bachelor- und Masterstudieng{\"a}ngen, Praktiker im Engineering}, language = {de} } @inproceedings{HueningStuettgen2021, author = {H{\"u}ning, Felix and St{\"u}ttgen, Marcel}, title = {Work in Progress: Interdisciplinary projects in times of COVID-19 crisis - challenges, risks and chances}, series = {2021 IEEE Global Engineering Education Conference (EDUCON)}, booktitle = {2021 IEEE Global Engineering Education Conference (EDUCON)}, doi = {10.1109/EDUCON46332.2021.9454006}, pages = {1175 -- 1179}, year = {2021}, language = {en} } @article{Finkenberger2021, author = {Finkenberger, Isabel Maria}, title = {Wohnen als Produktionsgemeinschaftsaufgabe}, series = {Jahrbuch f{\"u}r Christliche Sozialwissenschaften}, journal = {Jahrbuch f{\"u}r Christliche Sozialwissenschaften}, number = {62}, publisher = {Aschendorff}, address = {M{\"u}nster}, issn = {0075-2584}, doi = {10.17879/jcsw-2021-3537}, pages = {31 -- 42}, year = {2021}, abstract = {Wohnen als neue soziale Frage ist mehr als die Produktion neuer Formen von Wohnen und deren architektonischer Gestalt, und auch mehr als nur die Umsetzung sich ver{\"a}ndernder, jedoch individuell formulierter Wohnw{\"u}nsche. Sie spannt sich auf zwischen gesellschafts- und nachhaltigkeitspolitischen, hardcore-kapitalistischen und globalen Rahmenbedingungen, Hardware und Software, Individuum und Gemeinwohl, Konsum und Mitgestaltung. Entscheidend sind die Akteure und die Art und Weise, wie und nach welchen Maßst{\"a}ben sie handeln. Entscheidend ist aber auch, Wohnen sowohl kontextuell wie auch programmatisch neu zu denken und dadurch zu neuen Mischungen, Nachbarschaften und Bewertungskriterien einer Projekt- und Stadtentwicklung zu kommen, die mehr als die Summe seiner Einzelteile wollen - ein gutes Leben f{\"u}r Alle abseits der Frage des Geldbeutels und der sozialen Zugeh{\"o}rigkeit.}, language = {de} } @article{Olbertz2021, author = {Olbertz, Klaus}, title = {Wichtige arbeitsrechtliche Entwicklungen im Jahr 2020 : Der Jahresr{\"u}ckblick auf alles Wissenswerte im Arbeitsrecht des vergangenen Jahres}, series = {NWB - Steuer- und Wirtschaftsrecht}, journal = {NWB - Steuer- und Wirtschaftsrecht}, number = {10}, issn = {0028-3460}, pages = {703 -- 715}, year = {2021}, abstract = {Im Anschluss an die arbeitsrechtlichen Jahres{\"u}bersichten der vergangenen Jahre (NWB 5/2019 S. 266; NWB 8/2020 S. 557) gibt der nachfolgende Beitrag einen {\"U}berblick {\"u}ber relevante Entwicklungen im Arbeitsrecht des Jahres 2020. Der erste Teil besch{\"a}ftigt sich hierbei mit gesetzlichen {\"A}nderungen. Neben Regelungen, die auf die COVID-19-Pandemie zur{\"u}ckgef{\"u}hrt werden k{\"o}nnen, hat der Gesetzgeber auch andere Vorhaben umgesetzt. So wurde u. a. das Arbeitnehmerentsenderecht reformiert. F{\"u}r Diskussionen sorgt(e) zudem das Gesetzesvorhaben zur Regelung mobiler Arbeit. Im zweiten Teil werden f{\"u}r die Praxis wichtige h{\"o}chstrichterliche Gerichtsentscheidungen zum Arbeitsrecht erl{\"a}utert, alphabetisch sortiert von A (wie Antidiskriminierungsrecht) bis U (wie Urlaub).}, language = {de} } @masterthesis{Rittner2021, type = {Bachelor Thesis}, author = {Rittner, Jasper}, title = {Wald im Wandel}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {21 Seiten}, year = {2021}, abstract = {Die Arbeit „Wald im Wandel" besch{\"a}ftigt sich mit dem derzeitigen Zustand des Waldes in Deutschland und seiner kulturhistorischen Bedeutung. Im dazugeh{\"o}rigen Kurzfilm sieht man Aufnahmen der menschlichen Einflussnahme auf den Wald. Diese wurden mit „waldromantischen" Motiven umgestaltet. Die Kraft „waldromantischer" Bilder ist so {\"u}berzeugend, dass hieraus {\"U}berlegungen zu einer klimapolitischen Kampagne entstanden sind. Diese sind auf einer Informations-Webpage mit dem Titel „Projekt: Wald im Wandel" nachzulesen. Die Arbeit schl{\"a}gt eine Br{\"u}cke vom kulturhistorischen Symbol „deutscher Wald" hin zur Gegenwart - und dem Wald in Deutschland als einem potenziellen klimapolitischen Symbol.}, language = {de} } @article{Olbertz2021, author = {Olbertz, Klaus}, title = {Vertragsgestaltungen bei der Besch{\"a}ftigung von Rentnern in Unternehmen : (Befristete) Besch{\"a}ftigungsverh{\"a}ltnisse als sinnvolles Instrument zum Schließen von Personall{\"u}cken}, series = {NWB - Steuer- und Wirtschaftsrecht}, journal = {NWB - Steuer- und Wirtschaftsrecht}, number = {25}, issn = {0028-3460}, pages = {1810 -- 1817}, year = {2021}, language = {de} } @masterthesis{Aretz2021, type = {Bachelor Thesis}, author = {Aretz, Jannik}, title = {Venus und Mars}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {41 Seiten}, year = {2021}, abstract = {Venus und Mars - Mann und Frau. Ein bin{\"a}res System, welches heutzutage einer st{\"a}ndigen Hinterfragung ausgesetzt ist. Woraus entstand dieses System und wie manipulativ ist das Geschlecht wirklich? Die Pionierwerke der Gender Studies/Queer Studies zeigten auf, dass jeder Mensch sein Geschlecht durch das Imitieren von sozial-gesellschaftlich festgelegten Normen und Werten bildet. Drag-K{\"u}nstler*innen leben diesen Prozess in einer visuellen Form vor, indem sie Geschlechternormen aufgreifen und sie unabh{\"a}ngig vom biologischen Geschlecht der Darstellenden inszenieren, imitieren, parodieren und neu zusammensetzen. Jede Performance auf den Fotografien greift ebenfalls vorhandene Vorstellungen von Geschlecht auf und interpretiert sie neu: denn Drag kennt kein Original, genauso wenig wie das Geschlecht.}, language = {de} } @article{GermanMikuckiWelchetal.2021, author = {German, Laura and Mikucki, Jill A. and Welch, Susan A. and Welch, Kathleen A. and Lutton, Anthony and Dachwald, Bernd and Kowalski, Julia and Heinen, Dirk and Feldmann, Marco and Francke, Gero and Espe, Clemens and Lyons, W. Berry}, title = {Validation of sampling antarctic subglacial hypersaline waters with an electrothermal ice melting probe (IceMole) for environmental analytical geochemistry}, series = {International Journal of Environmental Analytical Chemistry}, volume = {101}, journal = {International Journal of Environmental Analytical Chemistry}, number = {15}, publisher = {Taylor \& Francis}, address = {London}, issn = {0306-7319}, doi = {10.1080/03067319.2019.1704750}, pages = {2654 -- 2667}, year = {2021}, abstract = {Geochemical characterisation of hypersaline waters is difficult as high concentrations of salts hinder the analysis of constituents at low concentrations, such as trace metals, and the collection of samples for trace metal analysis in natural waters can be easily contaminated. This is particularly the case if samples are collected by non-conventional techniques such as those required for aquatic subglacial environments. In this paper we present the first analysis of a subglacial brine from Taylor Valley, (~ 78°S), Antarctica for the trace metals: Ba, Co, Mo, Rb, Sr, V, and U. Samples were collected englacially using an electrothermal melting probe called the IceMole. This probe uses differential heating of a copper head as well as the probe's sidewalls and an ice screw at the melting head to move through glacier ice. Detailed blanks, meltwater, and subglacial brine samples were collected to evaluate the impact of the IceMole and the borehole pump, the melting and collection process, filtration, and storage on the geochemistry of the samples collected by this device. Comparisons between melt water profiles through the glacier ice and blank analysis, with published studies on ice geochemistry, suggest the potential for minor contributions of some species Rb, As, Co, Mn, Ni, NH4+, and NO2-+NO3- from the IceMole. The ability to conduct detailed chemical analyses of subglacial fluids collected with melting probes is critical for the future exploration of the hundreds of deep subglacial lakes in Antarctica.}, language = {en} } @inproceedings{MuellerSchmittLeiseetal.2021, author = {M{\"u}ller, Tim M. and Schmitt, Andreas and Leise, Philipp and Meck, Tobias and Altherr, Lena and Pelz, Peter F. and Pfetsch, Marc E.}, title = {Validation of an optimized resilient water supply system}, series = {Uncertainty in Mechanical Engineering}, booktitle = {Uncertainty in Mechanical Engineering}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-77255-0}, doi = {10.1007/978-3-030-77256-7_7}, pages = {70 -- 80}, year = {2021}, abstract = {Component failures within water supply systems can lead to significant performance losses. One way to address these losses is the explicit anticipation of failures within the design process. We consider a water supply system for high-rise buildings, where pump failures are the most likely failure scenarios. We explicitly consider these failures within an early design stage which leads to a more resilient system, i.e., a system which is able to operate under a predefined number of arbitrary pump failures. We use a mathematical optimization approach to compute such a resilient design. This is based on a multi-stage model for topology optimization, which can be described by a system of nonlinear inequalities and integrality constraints. Such a model has to be both computationally tractable and to represent the real-world system accurately. We therefore validate the algorithmic solutions using experiments on a scaled test rig for high-rise buildings. The test rig allows for an arbitrary connection of pumps to reproduce scaled versions of booster station designs for high-rise buildings. We experimentally verify the applicability of the presented optimization model and that the proposed resilience properties are also fulfilled in real systems.}, language = {en} } @masterthesis{Mingers2021, type = {Bachelor Thesis}, author = {Mingers, Laura}, title = {UN|SEEN}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {77 Seiten}, year = {2021}, abstract = {Innerhalb der Bundeswehr erleiden einige Soldaten w{\"a}hrend ihrer Berufsaus{\"u}bung oder in Eins{\"a}tzen eine posttraumatische Belastungsst{\"o}rung (PTBS). {\"U}ber sie als Menschen und {\"u}ber ihren Alltag mit der Erkrankung wird kaum gesprochen. Es ist wichtig, diesem Tabuthema entgegenzutreten, sodass in der Gesellschaft die Betroffenen verstanden, akzeptiert und angenommen werden. Die Arbeit „UN|SEEN" setzt sich mit dieser schwierigen Thematik und den Menschen wie auch ihrer Geschichte und ihrem Leben auseinander. Im Fotobuch sind hierf{\"u}r verschiedene an PTBS erkrankte Soldaten im Alltag fotografisch begleitet und interviewt wurden. Ebenso sind Fotos aus deren Bundeswehrzeit und aus Eins{\"a}tzen im Buch eingebaut, welche als „Flashbacks" dienen. „UN|SEEN" soll den Betrachter mit diesem Thema konfrontieren, eine neue Sichtweise er{\"o}ffnen und zum Handeln anregen.}, language = {de} } @masterthesis{Wild2021, type = {Bachelor Thesis}, author = {Wild, Lisa}, title = {UKIYO: Eine Neuinterpretation der fließenden Welt}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, year = {2021}, abstract = {Ukiyo kommt aus dem Japanischen und bedeutet {\"u}bersetzt so viel wie: „Den Moment leben, ohne von den Sorgen des Lebens ber{\"u}hrt zu werden." Gerade in Zeiten der Pandemie verliert man oft den Blick f{\"u}r das Sch{\"o}ne im Leben. Der Fotoband „UKIYO" soll dazu anregen, allt{\"a}gliche Dinge aus einem neuen Blickwinkel zu betrachten und die Sch{\"o}nheit im Verg{\"a}nglichen zu erkennen. Die Fotografien sind inspiriert durch das japanische Kunstgenre Ukiyo-e, was w{\"o}rtlich {\"u}bersetzt etwa „Bilder der heiteren, fließenden Welt" heißt. Die Gestaltung des Bildbandes orientiert sich an verschiedenen japanischen Stilmitteln, wie zum Beispiel Wabi-Sabi (die Sch{\"o}nheit im Unvollkommenen) und Mono no aware (eine melancholische Mischung aus Freude, Trauer und Hinnahme). „UKIYO" nimmt die Betrachter mit auf eine kleine Reise durch die fließende Welt. }, language = {de} } @techreport{Drescher2021, type = {Working Paper}, author = {Drescher, Hans Paul}, title = {Turbulence - minimum dissipation and maximum macroscopic momentum exchange}, pages = {44 Seiten}, year = {2021}, abstract = {The minimum dissipation requirement of the thermodynamics of irreversible processes is applied to characterize the existence of laminar and non-laminar, and the co-existence of laminar and turbulent flow zones. Local limitations of the different zones and three different forms of transition are defined. For the Couette flow a non-local "corpuscular" flow mechanism explains the logarithmic law-of-the-wall, maximum turbulent dimensions and a value x=0,415 for the v. K{\´a}rm{\´a}n constant. Limitations of the logarithmic law near the wall and in the centre of the experiment are interpreted.}, language = {en} } @masterthesis{Kausen2021, type = {Bachelor Thesis}, author = {Kausen, Catharina Marie}, title = {Transmission: Ein animiertes Musikvideo illustriert die Liebe und Verbindung zum Genre Techno}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {88 Seiten}, year = {2021}, abstract = {Techno ist seit seiner Entstehung mehr als ein Musik-Genre. Es ist ein Lebensgef{\"u}hl und eine Bewegung. Techno-Partys dienen vielen Menschen als Ventil, um die Sorgen des Alltags f{\"u}r eine Nacht vergessen zu k{\"o}nnen. „Transmission" portr{\"a}tiert anhand der Protagonistin die pers{\"o}nliche Beziehung zum Genre Techno. Das Musikvideo soll die Zuschauenden visuell anregen und mitreißen. Es bietet ihnen die M{\"o}glichkeit, sich selbst wieder erkennen zu k{\"o}nnen und soll Außenstehenden einen Einblick in die Techno-Szene erm{\"o}glichen. Mithilfe des Rotoskopie-Verfahrens konnte ein realistischer Animationsstil erreicht werden, welcher durch eine unrealistische Farbgebung der Charaktere gebrochen wird. Der Schwerpunkt der Bachelorarbeit liegt in der kreativ-gestalterischen Ausarbeitung. Die Musikvideo „Transmission" vermittelt das „Lebensgef{\"u}hl Techno" visuell anregend und nachvollziehbar.}, language = {de} } @masterthesis{Breuer2021, type = {Bachelor Thesis}, author = {Breuer, Annika}, title = {Transformativer Designguide: Konzeption eines digitalen Guides f{\"u}r nachhaltige Designentwicklungen}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, year = {2021}, abstract = {Designer entwerfen und gestalten oft, ohne die Gew{\"a}hrleistung von Ressourcen zu ber{\"u}cksichtigen. Nat{\"u}rliche Ressourcen werden im {\"U}bermaß verbraucht. Die Erde kommt mit dem Erneuern nicht mehr hinterher. Der Transformative Designguide ist ein digitaler Leitfaden f{\"u}r nachhaltige Designprozesse, der zu mehr Bewusstsein in der Produktion und im Design f{\"u}hrt, um Ressourcen langfristig einzusparen. Der Guide vermittelt ein umfassendes Bild und liefert alle ben{\"o}tigten Infos auf einen Blick. Das Design des Guides zeigt, dass nachhaltiges Design mehr Qualit{\"a}t durch erh{\"o}htes bewusstes Denken und Seriosit{\"a}t mit sich bringt. Die verschiedenen Herangehensweisen werden in einer einzigartigen 360° Navigation angezeigt. Animierte Grafiken scannen Materialien und Prozesse auf Nachhaltigkeit. Das Design des Guides wirkt dynamisch und sorgt f{\"u}r mehr Aufkl{\"a}rung im Bereich Ressourcenschutz.}, language = {de} } @article{BechtSchollmayerMonakhovaetal.2021, author = {Becht, Alexander and Schollmayer, Curd and Monakhova, Yulia and Holzgrabe, Ulrike}, title = {Tracing the origin of paracetamol tablets by near-infrared, mid-infrared, and nuclear magnetic resonance spectroscopy using principal component analysis and linear discriminant analysis}, series = {Analytical and Bioanalytical Chemistry}, volume = {413}, journal = {Analytical and Bioanalytical Chemistry}, publisher = {Springer Nature}, issn = {1618-2650}, doi = {10.1007/s00216-021-03249-z}, pages = {3107 -- 3118}, year = {2021}, abstract = {Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6\%/99.6\% and 98.7/100\% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.}, language = {en} } @article{MolinnusDrinicIkenetal.2021, author = {Molinnus, Denise and Drinic, Aleksander and Iken, Heiko and Kr{\"o}ger, Nadja and Zinser, Max and Smeets, Ralf and K{\"o}pf, Marius and Kopp, Alexander and Sch{\"o}ning, Michael Josef}, title = {Towards a flexible electrochemical biosensor fabricated from biocompatible Bombyx mori silk}, series = {Biosensors and Bioelectronics}, volume = {183}, journal = {Biosensors and Bioelectronics}, number = {Art. 113204}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0956-5663}, doi = {10.1016/j.bios.2021.113204}, year = {2021}, language = {en} } @article{HugenrothNeidlinEngelmannetal.2021, author = {Hugenroth, Kristin and Neidlin, Michael and Engelmann, Ulrich M. and Kaufmann, Tim A. S. and Steinseifer, Ulrich and Heilmann, Torsten}, title = {Tipless Transseptal Cannula Concept Combines Improved Hemodynamic Properties and Risk-Reduced Placement: an In Silico Proof-of-Concept}, series = {Artificial Organs}, journal = {Artificial Organs}, number = {Accepted Article}, publisher = {Wiley}, address = {Weinheim}, issn = {1525-1594}, doi = {10.1111/aor.13964}, year = {2021}, language = {en} } @article{KoehlerRoepkeWolf2021, author = {K{\"o}hler, Klemens and R{\"o}pke, Ren{\´e} and Wolf, Martin}, title = {Through a mirror darkly - On the obscurity of teaching goals in game-based learning in IT security}, series = {ISAGA 2019: Simulation Gaming Through Times and Disciplines}, journal = {ISAGA 2019: Simulation Gaming Through Times and Disciplines}, publisher = {Springer}, address = {Cham}, doi = {10.1007/978-3-030-72132-9_6}, pages = {61 -- 73}, year = {2021}, abstract = {Teachers and instructors use very specific language communicating teaching goals. The most widely used frameworks of common reference are the Bloom's Taxonomy and the Revised Bloom's Taxonomy. The latter provides distinction of 209 different teaching goals which are connected to methods. In Competence Developing Games (CDGs - serious games to convey knowledge) and in IT security education, a two- or three level typology exists, reducing possible learning outcomes to awareness, training, and education. This study explores whether this much simpler framework succeeds in achieving the same range of learning outcomes. Method wise a keyword analysis was conducted. The results were threefold: 1. The words used to describe teaching goals in CDGs on IT security education do not reflect the whole range of learning outcomes. 2. The word choice is nevertheless different from common language, indicating an intentional use of language. 3. IT security CDGs use different sets of terms to describe learning outcomes, depending on whether they are awareness, training, or education games. The interpretation of the findings is that the reduction to just three types of CDGs reduces the capacity to communicate and think about learning outcomes and consequently reduces the outcomes that are intentionally achieved.}, language = {en} } @inproceedings{KernImaniVashianiTimmermanns2021, author = {Kern, Alexander and Imani Vashiani, Anahita and Timmermanns, Tobias}, title = {Threat for human beings due to touch voltages and body currents caused by direct lightning strikes in case of non-isolated lightning protection systems using natural components}, series = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)}, booktitle = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)}, publisher = {IEEE}, isbn = {978-1-6654-2346-5}, doi = {10.1109/ICLPandSIPDA54065.2021.9627465}, pages = {8 Seiten}, year = {2021}, abstract = {For typical cases of non-isolated lightning protection systems (LPS) the impulse currents are investigated which may flow through a human body directly touching a structural part of the LPS. Based on a basic LPS model with conventional down-conductors especially the cases of external and internal steel columns and metal fa{\c{c}}ades are considered and compared. Numerical simulations of the line quantities voltages and currents in the time domain are performed with an equivalent circuit of the entire LPS. As a result it can be stated that by increasing the number of conventional down-conductors and external steel columns the threat for a human being can indeed be reduced, but not down to an acceptable limit. In case of internal steel columns used as natural down-conductors the threat can be reduced sufficiently, depending on the low-resistive connection of the steel columns to the lightning equipotential bonding or the earth termination system, resp. If a metal fa{\c{c}}ade is used the threat for human beings touching is usually very low, if the fa{\c{c}}ade is sufficiently interconnected and multiply connected to the lightning equipotential bonding or the earth termination system, resp.}, language = {en} } @article{HagenkampBlankeDoering2021, author = {Hagenkamp, Markus and Blanke, Tobias and D{\"o}ring, Bernd}, title = {Thermoelectric building temperature control: a potential assessment}, series = {International Journal of Energy and Environmental Engineering}, volume = {13}, journal = {International Journal of Energy and Environmental Engineering}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/s40095-021-00424-x}, pages = {241 -- 254}, year = {2021}, abstract = {This study focuses on thermoelectric elements (TEE) as an alternative for room temperature control. TEE are semi-conductor devices that can provide heating and cooling via a heat pump effect without direct noise emissions and no refrigerant use. An efficiency evaluation of the optimal operating mode is carried out for different numbers of TEE, ambient temperatures, and heating loads. The influence of an additional heat recovery unit on system efficiency and an unevenly distributed heating demand are examined. The results show that TEE can provide heat at a coefficient of performance (COP) greater than one especially for small heating demands and high ambient temperatures. The efficiency increases with the number of elements in the system and is subject to economies of scale. The best COP exceeds six at optimal operating conditions. An additional heat recovery unit proves beneficial for low ambient temperatures and systems with few TEE. It makes COPs above one possible at ambient temperatures below 0 ∘C. The effect increases efficiency by maximal 0.81 (from 1.90 to 2.71) at ambient temperature 5 K below room temperature and heating demand Q˙h=100W but is subject to diseconomies of scale. Thermoelectric technology is a valuable option for electricity-based heat supply and can provide cooling and ventilation functions. A careful system design as well as an additional heat recovery unit significantly benefits the performance. This makes TEE superior to direct current heating systems and competitive to heat pumps for small scale applications with focus on avoiding noise and harmful refrigerants.}, language = {en} } @article{BerneckerBoyerGathmann2021, author = {Bernecker, Andreas and Boyer, Pierre C. and Gathmann, Christina}, title = {The Role of Electoral Incentives for Policy Innovation: Evidence from the US Welfare Reform}, series = {American Economic Journal: Economic Policy}, volume = {13}, journal = {American Economic Journal: Economic Policy}, number = {2}, publisher = {American Economic Association}, address = {Nashville, Tenn.}, issn = {1945-774X}, doi = {10.1257/pol.20190690}, pages = {26 -- 57}, year = {2021}, language = {en} } @masterthesis{Kieker2021, type = {Bachelor Thesis}, author = {Kieker, Lea}, title = {THE LAST STOP: Eine Fotodokumentation {\"u}ber den Ort, an dem Menschen auf ihren Tod warten}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {45 Seiten}, year = {2021}, abstract = {Das Projekt thematisiert das Leben im Hospiz. Diese Arbeit liefert mittels authentischer Fotografien von R{\"a}umlichkeiten und Details sowie durch intensive Portr{\"a}ts von drei Bewohnenden einen realistischen Einblick in ein Hospiz. Durch diese Aufnahmen werden die Betrachtenden mit dem Thema „Tod" konfrontiert und es so diesem Thema n{\"a}her gebracht, um eventuelle Vorurteile einer solchen Einrichtung gegen{\"u}ber abzulegen. Innerhalb des Bildbands sieht man Fotografien von Fluren, Dekoration, R{\"a}umen und Portr{\"a}taufnahmen. Begleitend zu den Portr{\"a}tfotos der Bewohnenden finden sich im Bildband Berichte der selbigen, {\"u}ber ihre allt{\"a}glichen Gedanken im Umgang mit dem bevorstehenden eigenen Lebensende. Im Zuge der Recherche zu diesem Projekt hat außerdem ein ausf{\"u}hrliches Interview mit einer Pflegekraft des thematisierten Hospizes dabei geholfen, einen realistischen Einblick in die Arbeit vor Ort zu bekommen.}, language = {de} } @misc{Huebert2021, type = {Master Thesis}, author = {Huebert, Edgar}, title = {The Last Sketch}, publisher = {FH Aachen}, address = {Aachen}, pages = {65 Seiten}, year = {2021}, abstract = {Das Projekt thematisiert, in Form eines Animationsfilms, den Umgang eines Vaters mit dem Tod seines Kindes und den Versuch den Weg zur{\"u}ck zu sich selbst und ins Leben zu finden. Das Ziel war es die Emotionen der Schauspieler in einen Animationsfilm authentisch zu implementieren. Um den Animationsfilm situationsgerecht erz{\"a}hlen zu k{\"o}nnen, wurde das Verst{\"a}ndnis f{\"u}r Trauer in den Vordergrund gestellt. Dazu wurden digitale Drehs durchgef{\"u}hrt und viele Bereiche der 3D Gestaltung angewendet. Viele der Betroffenen erleben besonders in den ersten Tagen nach dem Verlust ihres Kindes nicht das notwendige Verst{\"a}ndnis f{\"u}r ihre Trauer. Diese Projektarbeit m{\"o}chte aufzeigen, wie unterschiedlich Menschen trauern und wie sie sich in ihrer Verschiedenheit verlieren k{\"o}nnen, besonders wenn es um das gemeinsame Kind geht. Wenn ein Kind im Sterben liegt, steht f{\"u}r die Eltern sein Wohlbefinden an erster Stelle. Sie wollen alles richtig machen. Der Protagonist des Films (Teo) und seine Frau Mia haben jedoch unterschiedliche Vorstellung davon, was das Richtige ist und auch nach dem Tod ihres Kindes haben sie unterschiedliche Bew{\"a}ltigungsstrategien, um mit diesem Schicksalsschlag umzugehen. Einer der Gr{\"u}nde, warum 80\% der Ehepaare sich nach so einem Schicksalsschlag trennen liegt in genau dieser Problematik, weswegen es wichtig ist, diese Thematik zu beleuchten.}, language = {de} } @masterthesis{Jonas2021, type = {Bachelor Thesis}, author = {Jonas, Eva Johanna}, title = {The future of work: How to create a better User Experience for distributed workforce}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {213 Seiten}, year = {2021}, abstract = {Die Nachfrage nach flexiblen Arbeitsmodellen und damit Remote Work steigt und wird zunehmend zum Kriterium bei der Jobauswahl. Trotz der vielen Vorteile gibt es in der „Remote-Arbeitswelt" aber immer noch einige Herausforderungen. Remote Arbeitende haben eine andere, teils nachteilige Erfahrung gegen{\"u}ber Kollegen vor Ort. Um daf{\"u}r eine nutzerzentrierte L{\"o}sung zu finden, lag der Fokus bei dieser Arbeit auf den Auswirkungen und Bed{\"u}rfnissen des arbeitenden Menschen. Basierend hierauf wurde ein Dienstleistungsservice konzipiert. Dieser unterst{\"u}tzt Unternehmen, Selbstst{\"a}ndige und Mitarbeitende durch passende Angebote und Dienstleistungen in den Bereichen Ausstattung, Technik, Gesundheit, Corporate Benefits u.{\"A}. Dies erm{\"o}glicht auch Arbeitgebenden Aufgaben auszulagern und die Attraktivit{\"a}t und Konkurrenzf{\"a}higkeit auf dem Arbeitsmarkt zu steigern. Das wird zuk{\"u}nftig im „war for digitals talents" immer wichtiger werden.}, language = {de} } @article{WaldvogelRitzmannFreyleretal.2021, author = {Waldvogel, Janice and Ritzmann, Ramona and Freyler, Kathrin and Helm, Michael and Monti, Elena and Albracht, Kirsten and St{\"a}udle, Benjamin and Gollhofer, Albert and Narici, Marco}, title = {The Anticipation of Gravity in Human Ballistic Movement}, series = {Frontiers in Physiology}, journal = {Frontiers in Physiology}, publisher = {Frontiers}, address = {Lausanne}, issn = {1664-042X}, doi = {10.3389/fphys.2021.614060}, year = {2021}, abstract = {Stretch-shortening type actions are characterized by lengthening of the pre-activated muscle-tendon unit (MTU) in the eccentric phase immediately followed by muscle shortening. Under 1 g, pre-activity before and muscle activity after ground contact, scale muscle stiffness, which is crucial for the recoil properties of the MTU in the subsequent push-off. This study aimed to examine the neuro-mechanical coupling of the stretch-shortening cycle in response to gravity levels ranging from 0.1 to 2 g. During parabolic flights, 17 subjects performed drop jumps while electromyography (EMG) of the lower limb muscles was combined with ultrasound images of the gastrocnemius medialis, 2D kinematics and kinetics to depict changes in energy management and performance. Neuro-mechanical coupling in 1 g was characterized by high magnitudes of pre-activity and eccentric muscle activity allowing an isometric muscle behavior during ground contact. EMG during pre-activity and the concentric phase systematically increased from 0.1 to 1 g. Below 1 g the EMG in the eccentric phase was diminished, leading to muscle lengthening and reduced MTU stretches. Kinetic energy at take-off and performance were decreased compared to 1 g. Above 1 g, reduced EMG in the eccentric phase was accompanied by large MTU and muscle stretch, increased joint flexion amplitudes, energy loss and reduced performance. The energy outcome function established by linear mixed model reveals that the central nervous system regulates the extensor muscles phase- and load-specifically. In conclusion, neuro-mechanical coupling appears to be optimized in 1 g. Below 1 g, the energy outcome is compromised by reduced muscle stiffness. Above 1 g, loading progressively induces muscle lengthening, thus facilitating energy dissipation.}, language = {en} } @article{HeinkeKnickerAlbracht2021, author = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten}, title = {Test-retest reliability of the internal shoulder rotator muscles' stretch reflex in healthy men}, series = {Journal of Electromyography and Kinesiology}, volume = {62}, journal = {Journal of Electromyography and Kinesiology}, number = {Article 102611}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1050-6411}, doi = {10.1016/j.jelekin.2021.102611}, year = {2021}, abstract = {Until now the reproducibility of the short latency stretch reflex of the internal rotator muscles of the glenohumeral joint has not been identified. Twenty-three healthy male participants performed three sets of external shoulder rotation stretches with various pre-activation levels on two different dates of measurement to assess test-retest reliability. All stretches were applied with a dynamometer acceleration of 104°/s2 and a velocity of 150°/s. Electromyographical response was measured via surface EMG. Reflex latencies showed a pre-activation effect (ƞ2 = 0,355). ICC ranged from 0,735 to 0,909 indicating an overall "good" relative reliability. SRD 95\% lay between ±7,0 to ±12,3 ms.. The reflex gain showed overall poor test-retest reproducibility. The chosen methodological approach presented a suitable test protocol for shoulder muscles stretch reflex latency evaluation. A proof-of-concept study to validate the presented methodical approach in shoulder involvement including subjects with clinically relevant conditions is recommended.}, language = {en} } @article{Gaigall2021, author = {Gaigall, Daniel}, title = {Test for Changes in the Modeled Solvency Capital Requirement of an Internal Risk Model}, series = {ASTIN Bulletin}, volume = {51}, journal = {ASTIN Bulletin}, number = {3}, publisher = {Cambridge Univ. Press}, address = {Cambridge}, issn = {1783-1350}, doi = {10.1017/asb.2021.20}, pages = {813 -- 837}, year = {2021}, abstract = {In the context of the Solvency II directive, the operation of an internal risk model is a possible way for risk assessment and for the determination of the solvency capital requirement of an insurance company in the European Union. A Monte Carlo procedure is customary to generate a model output. To be compliant with the directive, validation of the internal risk model is conducted on the basis of the model output. For this purpose, we suggest a new test for checking whether there is a significant change in the modeled solvency capital requirement. Asymptotic properties of the test statistic are investigated and a bootstrap approximation is justified. A simulation study investigates the performance of the test in the finite sample case and confirms the theoretical results. The internal risk model and the application of the test is illustrated in a simplified example. The method has more general usage for inference of a broad class of law-invariant and coherent risk measures on the basis of a paired sample.}, language = {en} } @masterthesis{Zosgornik2021, type = {Bachelor Thesis}, author = {Zosgornik, Julia}, title = {Tempor{\"a}rer, mobiler Lebensraum: ein Wohnkonzept f{\"u}r Tinyhouses aus alten, ungenutzten Bahnwaggons}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {99 Seiten}, year = {2021}, abstract = {Das Olympiagel{\"a}nde in M{\"u}nchen wurde im Jahre 1972 durch die M{\"u}nchener S-Bahn erreichbar. Nach der Nutzung w{\"a}hrend der Olympischen Spiele wurde die Strecke weiterhin von der Linie S3angefahren, aber schließlich 1988 stillgelegt und steht seither unter Denkmalschutz. Das umfassende Gel{\"a}nde ist bis heute gut ausgebaut und bietet viel Raum f{\"u}r Freizeitaktivit{\"a}ten. Nun bietet sich dieser Standort f{\"u}r ein neues Wohnkonzept an. Aus alten, nicht mehr nutzbaren Bahnwaggons entstehen Tinyhouse-Module. Aus dem alten Olympiabahnhof der S3 wird ein neues Viertel f{\"u}r junge Leute, Studenten und alle anderen, die sich vorstellen k{\"o}nnen in einem Tinyhouse zu wohnen.}, language = {de} } @article{SeefeldtDachwald2021, author = {Seefeldt, Patric and Dachwald, Bernd}, title = {Temperature increase on folded solar sail membranes}, series = {Advances in Space Research}, volume = {67}, journal = {Advances in Space Research}, number = {9}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0273-1177}, doi = {10.1016/j.asr.2020.09.026}, pages = {2688 -- 2695}, year = {2021}, language = {en} } @masterthesis{Dressen2021, type = {Bachelor Thesis}, author = {Dreßen, Samira}, title = {Teach and Learn-Platform: eine Applikation f{\"u}r Bildungseinrichtungen, Sch{\"u}ler und Studenten}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {198 Seiten}, year = {2021}, abstract = {Die Applikation „Slot" ist eine lehrbegleitende Kommunikations- und Kooperationsplattform, die eine zeitgem{\"a}ße Lehre, Studienorganisation und Pr{\"a}sentation zul{\"a}sst. Slot dient dabei nicht nur als Hilfestellung f{\"u}r Lehrende und Lernende, sondern erm{\"o}glicht auch die vollst{\"a}ndige Durchf{\"u}hrung von effizientem Unterricht. Den Lernenden soll maximale Kontrolle zur Erarbeitung ihres Wissens und {\"U}bersichtlichkeit in der Kommunikation geboten werden. Um f{\"u}r die unterschiedlichen Nutzergruppen ein benutzerfreundliches System zu schaffen, steht eine breitgef{\"a}cherte Funktionsauswahl zur Verf{\"u}gung: Videochat, Messenger, VR-Raum, Whiteboard, Aufgaben{\"u}bersicht, Datenabgabe, Kalender, Profil und ToDo-List. Die Nutzungsm{\"o}glichkeiten k{\"o}nnen individuell auf die unterschiedlichen Nutzergruppen und deren entsprechenden Bed{\"u}rfnissen angepasst werden.}, language = {de} } @masterthesis{Holtschlag2021, type = {Bachelor Thesis}, author = {Holtschlag, Uli}, title = {tape foundry: Eine Distribubutionsplattform f{\"u}r studentische Schriften}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {55 Seiten}, year = {2021}, abstract = {Die »tape foundry« ist eine interdisziplin{\"a}re Distributionsplattform f{\"u}r studentische Schriften, die Studierende auf dem großen Type-Design Markt neu platziert und einen Raum zur Entfaltung gibt. Besonders durch Instagram ist die heutige Type-Designszene gr{\"o}ßer denn je und viele Entw{\"u}rfe gehen in der Maße unter. Um diesem Ph{\"a}nomen entgegenzuwirken wurde die »tape foundry« ins Leben gerufen. Sie versucht mit der Kombination aus Fotografie, Type Design und der Funktion als Kassettenlabel neue interdisziplin{\"a}re Wege zu gehen, um sich von der klassischen {\"A}sthetik abzusetzen. Die Webseite stellt sich bewusst gegen g{\"a}ngige UX/UI Standards und setzt auf neue Nutzungsprinzipien kombiniert mit einer lauten kontrastreichen Bildwelt.}, language = {de} } @article{LeiseEsserEichenlaubetal.2021, author = {Leise, Philipp and Eßer, Arved and Eichenlaub, Tobias and Schleiffer, Jean-Eric and Altherr, Lena and Rinderknecht, Stephan and Pelz, Peter F.}, title = {Sustainable system design of electric powertrains - comparison of optimization methods}, series = {Engineering Optimization}, journal = {Engineering Optimization}, publisher = {Taylor \& Francis}, address = {London}, issn = {0305-215X}, doi = {10.1080/0305215X.2021.1928660}, year = {2021}, abstract = {The transition within transportation towards battery electric vehicles can lead to a more sustainable future. To account for the development goal 'climate action' stated by the United Nations, it is mandatory, within the conceptual design phase, to derive energy-efficient system designs. One barrier is the uncertainty of the driving behaviour within the usage phase. This uncertainty is often addressed by using a stochastic synthesis process to derive representative driving cycles and by using cycle-based optimization. To deal with this uncertainty, a new approach based on a stochastic optimization program is presented. This leads to an optimization model that is solved with an exact solver. It is compared to a system design approach based on driving cycles and a genetic algorithm solver. Both approaches are applied to find efficient electric powertrains with fixed-speed and multi-speed transmissions. Hence, the similarities, differences and respective advantages of each optimization procedure are discussed.}, language = {en} } @inproceedings{Huening2021, author = {H{\"u}ning, Felix}, title = {Sustainable changes beyond covid-19 for a second semester physics course for electrical engineering students}, series = {Blended Learning in Engineering Education: challenging, enlightening - and lasting?}, booktitle = {Blended Learning in Engineering Education: challenging, enlightening - and lasting?}, isbn = {978-2-87352-023-6}, pages = {1405 -- 1409}, year = {2021}, abstract = {The course Physics for Electrical Engineering is part of the curriculum of the bachelor program Electrical Engineering at University of Applied Science Aachen. Before covid-19 the course was conducted in a rather traditional way with all parts (lecture, exercise and lab) face-to-face. This teaching approach changed fundamentally within a week when the covid-19 limitations forced all courses to distance learning. All parts of the course were transformed to pure distance learning including synchronous and asynchronous parts for the lecture, live online-sessions for the exercises and self-paced labs at home. Using these methods, the course was able to impart the required knowledge and competencies. Taking the teacher's observations of the student's learning behaviour and engagement, the formal and informal feedback of the students and the results of the exams into account, the new methods are evaluated with respect to effectiveness, sustainability and suitability for competence transfer. Based on this analysis strong and weak points of the concept and countermeasures to solve the weak points were identified. The analysis further leads to a sustainable teaching approach combining synchronous and asynchronous parts with self-paced learning times that can be used in a very flexible manner for different learning scenarios, pure online, hybrid (mixture of online and presence times) and pure presence teaching.}, language = {en} } @inproceedings{PfeifferBalcGebhardt2021, author = {Pfeiffer, Johann and Balc, N. and Gebhardt, Andreas}, title = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen}, series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz}, booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz}, publisher = {Verlag Ernst-Abbe-Hochschule Jena}, address = {Jena}, isbn = {978-3-932886-36-2}, pages = {99 -- 102}, year = {2021}, abstract = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.}, language = {de} } @incollection{PfetschAbeleAltherretal.2021, author = {Pfetsch, Marc E. and Abele, Eberhard and Altherr, Lena and B{\"o}lling, Christian and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Groche, Peter and Hoppe, Florian and Kirchner, Eckhard and Kloberdanz, Hermann and Knoll, Maximilian and Kolvenbach, Philip and Kuttich-Meinlschmidt, Anja and Leise, Philipp and Lorenz, Ulf and Matei, Alexander and Molitor, Dirk A. and Niessen, Pia and Pelz, Peter F. and Rexer, Manuel and Schmitt, Andreas and Schmitt, Johann M. and Schulte, Fiona and Ulbrich, Stefan and Weigold, Matthias}, title = {Strategies for mastering uncertainty}, series = {Mastering uncertainty in mechanical engineering}, booktitle = {Mastering uncertainty in mechanical engineering}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-78353-2}, doi = {10.1007/978-3-030-78354-9_6}, pages = {365 -- 456}, year = {2021}, abstract = {This chapter describes three general strategies to master uncertainty in technical systems: robustness, flexibility and resilience. It builds on the previous chapters about methods to analyse and identify uncertainty and may rely on the availability of technologies for particular systems, such as active components. Robustness aims for the design of technical systems that are insensitive to anticipated uncertainties. Flexibility increases the ability of a system to work under different situations. Resilience extends this characteristic by requiring a given minimal functional performance, even after disturbances or failure of system components, and it may incorporate recovery. The three strategies are described and discussed in turn. Moreover, they are demonstrated on specific technical systems.}, language = {en} } @article{JildehWagnerSchoening2021, author = {Jildeh, Zaid B. and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef}, title = {Sterilization of Objects, Products, and Packaging Surfaces and Their Characterization in Different Fields of Industry: The Status in 2020}, series = {physica status solidi (a) applications and materials science}, volume = {218}, journal = {physica status solidi (a) applications and materials science}, number = {13}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1862-6319}, doi = {10.1002/pssa.202000732}, pages = {27 Seiten}, year = {2021}, abstract = {The treatment method to deactivate viable microorganisms from objects or products is termed sterilization. There are multiple forms of sterilization, each intended to be applied for a specific target, which depends on—but not limited to—the thermal, physical, and chemical stability of that target. Herein, an overview on the currently used sterilization processes in the global market is provided. Different sterilization techniques are grouped under a category that describes the method of treatment: radiation (gamma, electron beam, X-ray, and ultraviolet), thermal (dry and moist heat), and chemical (ethylene oxide, ozone, chlorine dioxide, and hydrogen peroxide). For each sterilization process, the typical process parameters as defined by regulations and the mode of antimicrobial activity are summarized. Finally, the recommended microorganisms that are used as biological indicators to validate sterilization processes in accordance with the rules that are established by various regulatory agencies are summarized.}, language = {en} } @inproceedings{KohlSchmidtsKloeseretal.2021, author = {Kohl, Philipp and Schmidts, Oliver and Kl{\"o}ser, Lars and Werth, Henri and Kraft, Bodo and Z{\"u}ndorf, Albert}, title = {STAMP 4 NLP - an agile framework for rapid quality-driven NLP applications development}, series = {Quality of Information and Communications Technology. QUATIC 2021}, booktitle = {Quality of Information and Communications Technology. QUATIC 2021}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-85346-4}, doi = {10.1007/978-3-030-85347-1_12}, pages = {156 -- 166}, year = {2021}, abstract = {The progress in natural language processing (NLP) research over the last years, offers novel business opportunities for companies, as automated user interaction or improved data analysis. Building sophisticated NLP applications requires dealing with modern machine learning (ML) technologies, which impedes enterprises from establishing successful NLP projects. Our experience in applied NLP research projects shows that the continuous integration of research prototypes in production-like environments with quality assurance builds trust in the software and shows convenience and usefulness regarding the business goal. We introduce STAMP 4 NLP as an iterative and incremental process model for developing NLP applications. With STAMP 4 NLP, we merge software engineering principles with best practices from data science. Instantiating our process model allows efficiently creating prototypes by utilizing templates, conventions, and implementations, enabling developers and data scientists to focus on the business goals. Due to our iterative-incremental approach, businesses can deploy an enhanced version of the prototype to their software environment after every iteration, maximizing potential business value and trust early and avoiding the cost of successful yet never deployed experiments.}, language = {en} } @masterthesis{Sorgalla2021, type = {Bachelor Thesis}, author = {Sorgalla, Jonas}, title = {Skidio - die digitale Transformation der Kosmetikindustrie : die Entwicklung eines digitalen Vertriebskanals}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {159 Seiten}, year = {2021}, abstract = {Skidio basiert dabei auf dem Konzept, dass das Video f{\"u}r die Kosmetikindustrie das optimale Medium f{\"u}r Produktvorstellungen ist. Der Ausgangspunkt f{\"u}r das Einkaufserlebnis des Nutzers ist daher ein Video-Feed, bestehend aus Kurz- und Live-Videos, die einen direkten Kauf der gezeigten Produkte erm{\"o}glichen. So entsteht ein Ort, an dem Nutzer auf eine unterhaltsame Art und Weise Inspiration f{\"u}r die eigene Hautpflege finden k{\"o}nnen. Dabei ist das Video als Medium nicht nur unterhaltsamer, sondern zugleich auch deutlich informativer als klassische Produktlistings. Die Produktpr{\"a}sentation wird interaktiver, erlebbarer und deutlich effektiver. Gemeinsam mit Technologien wie einer digitalen Hautanalyse, wird so das Potenzial des E-Commerce f{\"u}r die Beautyindustrie vollst{\"a}ndig entfaltet.}, language = {de} } @inproceedings{OlderogMohrBegingetal.2021, author = {Olderog, M. and Mohr, P. and Beging, Stefan and Tsoumpas, C. and Ziemons, Karl}, title = {Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph}, series = {2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)}, booktitle = {2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)}, publisher = {IEEE}, isbn = {978-1-7281-7693-2}, doi = {10.1109/NSS/MIC42677.2020.9507901}, pages = {4 Seiten}, year = {2021}, abstract = {In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50\%, while a change of the energy resolution in the absorber layer from 12\% to 4.5\% results in a reduction of 60\%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.}, language = {en} } @inproceedings{ElMoussaouiKassmiAlexopoulosetal.2021, author = {El Moussaoui, Noureddine and Kassmi, Khalil and Alexopoulos, Spiros and Schwarzer, Klemens and Chayeb, Hamid and Bachiri, Najib}, title = {Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy}, series = {Materialstoday: Proceedings}, booktitle = {Materialstoday: Proceedings}, issn = {2214-7853}, doi = {10.1016/j.matpr.2021.03.115}, year = {2021}, language = {en} } @article{MonakhovaDiehl2021, author = {Monakhova, Yulia and Diehl, Bernd W. K.}, title = {Simplification of NMR Workflows by Standardization Using 2H Integral of Deuterated Solvent as Applied to Aloe vera Preparations}, series = {Applied Magnetic Resonance}, volume = {52}, journal = {Applied Magnetic Resonance}, number = {11}, publisher = {Springer}, address = {Cham}, issn = {1613-7507}, doi = {10.1007/s00723-021-01393-4}, pages = {1591 -- 1600}, year = {2021}, abstract = {In this study, a recently proposed NMR standardization approach by 2H integral of deuterated solvent for quantitative multicomponent analysis of complex mixtures is presented. As a proof of principle, the existing NMR routine for the analysis of Aloe vera products was modified. Instead of using absolute integrals of targeted compounds and internal standard (nicotinamide) from 1H-NMR spectra, quantification was performed based on the ratio of a particular 1H-NMR compound integral and 2H-NMR signal of deuterated solvent D2O. Validation characteristics (linearity, repeatability, accuracy) were evaluated and the results showed that the method has the same precision as internal standardization in case of multicomponent screening. Moreover, a dehydration process by freeze drying is not necessary for the new routine. Now, our NMR profiling of A. vera products needs only limited sample preparation and data processing. The new standardization methodology provides an appealing alternative for multicomponent NMR screening. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and is recommended in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).}, language = {en} } @inproceedings{MerkensHebel2021, author = {Merkens, Torsten and Hebel, Christoph}, title = {Sharing mobility concepts - flexible, sustainable, smart}, series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG)}, booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG)}, isbn = {978-3-902103-94-9}, pages = {43 -- 44}, year = {2021}, language = {en} }