@inproceedings{EggertWeber2023,
  author    = {Eggert, Mathias and Weber, Jannik},
  title     = {What drives the purchase decision in Instagram stores?},
  series = {ECIS 2023 Research Papers},
  booktitle = {ECIS 2023 Research Papers},
  pages     = {1 -- 17},
  year      = {2023},
  abstract  = {The popularity of social media and particularly Instagram grows steadily. People use the different platforms to share pictures as well as videos and to communicate with friends. The potential of social media platforms is also being used for marketing purposes and for selling products. While for Facebook and other online social media platforms the purchase decision factors are investigated several times, Instagram stores remain mainly unattended so far. The present research work closes this gap and sheds light into decisive factors for purchasing products offered in Instagram stores. A theoretical research model, which contains selected constructs that are assumed to have a significant influence on Instagram user´s purchase intention, is developed. The hypotheses are evaluated by applying structural equation modelling on survey data containing 127 relevant participants. The results of the study reveal that 'trust', 'personal recommendation', and 'usability' significantly influences user's buying intention in Instagram stores.},
  language  = {en}
}
@inproceedings{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the determination of harmonic propeller loads},
  series = {AIAA SCITECH 2023 Forum},
  booktitle = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  doi       = {10.2514/6.2023-2404},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.},
  language  = {en}
}
@incollection{DachwaldUlamecKowalskietal.2023,
  author    = {Dachwald, Bernd and Ulamec, Stephan and Kowalski, Julia and Boxberg, Marc S. and Baader, Fabian and Biele, Jens and K{\"o}mle, Norbert},
  title     = {Ice melting probes},
  series = {Handbook of Space Resources},
  booktitle = {Handbook of Space Resources},
  editor    = {Badescu, Viorel and Zacny, Kris and Bar-Cohen, Yoseph},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-97912-6 (Print)},
  doi       = {10.1007/978-3-030-97913-3_29},
  pages     = {955 -- 996},
  year      = {2023},
  abstract  = {The exploration of icy environments in the solar system, such as the poles of Mars and the icy moons (a.k.a. ocean worlds), is a key aspect for understanding their astrobiological potential as well as for extraterrestrial resource inspection. On these worlds, ice melting probes are considered to be well suited for the robotic clean execution of such missions. In this chapter, we describe ice melting probes and their applications, the physics of ice melting and how the melting behavior can be modeled and simulated numerically, the challenges for ice melting, and the required key technologies to deal with those challenges. We also give an overview of existing ice melting probes and report some results and lessons learned from laboratory and field tests.},
  language  = {en}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin R. and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@inproceedings{EichenbaumNikolovskiMuelhensetal.2023,
  author    = {Eichenbaum, Julian and Nikolovski, Gjorgji and M{\"u}lhens, Leon and Reke, Michael and Ferrein, Alexander and Scholl, Ingrid},
  title     = {Towards a lifelong mapping approach using Lanelet 2 for autonomous open-pit mine operations},
  series = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)},
  booktitle = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)},
  publisher = {IEEE},
  isbn      = {979-8-3503-2069-5 (Online)},
  doi       = {10.1109/CASE56687.2023.10260526},
  pages     = {8 Seiten},
  year      = {2023},
  abstract  = {Autonomous agents require rich environment models for fulfilling their missions. High-definition maps are a well-established map format which allows for representing semantic information besides the usual geometric information of the environment. These are, for instance, road shapes, road markings, traffic signs or barriers. The geometric resolution of HD maps can be as precise as of centimetre level. In this paper, we report on our approach of using HD maps as a map representation for autonomous load-haul-dump vehicles in open-pit mining operations. As the mine undergoes constant change, we also need to constantly update the map. Therefore, we follow a lifelong mapping approach for updating the HD maps based on camera-based object detection and GPS data. We show our mapping algorithm based on the Lanelet 2 map format and show our integration with the navigation stack of the Robot Operating System. We present experimental results on our lifelong mapping approach from a real open-pit mine.},
  language  = {en}
}
@inproceedings{ViehmannLimpertHofmannetal.2023,
  author    = {Viehmann, Tarik and Limpert, Nicolas and Hofmann, Till and Henning, Mike and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup logistics league with visual servoing and centralized goal reasoning},
  series = {RoboCup 2022: Robot World Cup XXV},
  booktitle = {RoboCup 2022: Robot World Cup XXV},
  editor    = {Eguchi, Amy and Lau, Nuno and Paetzel-Pr{\"u}smann, Maike and Wanichanon, Thanapat},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-28468-7 (Print)},
  doi       = {https://doi.org/10.1007/978-3-031-28469-4_25},
  pages     = {300 -- 312},
  year      = {2023},
  abstract  = {The RoboCup Logistics League (RCLL) is a robotics competition in a production logistics scenario in the context of a Smart Factory. In the competition, a team of three robots needs to assemble products to fulfill various orders that are requested online during the game. This year, the Carologistics team was able to win the competition with a new approach to multi-agent coordination as well as significant changes to the robot's perception unit and a pragmatic network setup using the cellular network instead of WiFi. In this paper, we describe the major components of our approach with a focus on the changes compared to the last physical competition in 2019.},
  language  = {en}
}
@inproceedings{NikolovskiLimpertNessauetal.2023,
  author    = {Nikolovski, Gjorgji and Limpert, Nicolas and Nessau, Hendrik and Reke, Michael and Ferrein, Alexander},
  title     = {Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles},
  series = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  isbn      = {979-8-3503-4691-6 (Online)},
  doi       = {10.1109/IV55152.2023.10186806},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle's drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.},
  language  = {en}
}
@article{ŠakićMarinkovićButenwegetal.2023,
  author    = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls},
  series = {Engineering Structures},
  volume    = {276},
  journal   = {Engineering Structures},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.115342},
  year      = {2023},
  abstract  = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.},
  language  = {en}
}
@article{VoegeleJosyabhatlaBalletal.2023,
  author    = {V{\"o}gele, Stefan and Josyabhatla, Vishnu Teja and Ball, Christopher and Rhoden, Imke and Grajewski, Matthias and R{\"u}bbelke, Dirk and Kuckshinrichs, Wilhelm},
  title     = {Robust assessment of energy scenarios from stakeholders' perspectives},
  series = {Energy},
  journal   = {Energy},
  number    = {In Press, Article 128326},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-6785 (Online)},
  doi       = {10.1016/j.energy.2023.128326},
  year      = {2023},
  abstract  = {Using scenarios is vital in identifying and specifying measures for successfully transforming the energy system. Such transformations can be particularly challenging and require the support of a broader set of stakeholders. Otherwise, there will be opposition in the form of reluctance to adopt the necessary technologies. Usually, processes for considering stakeholders' perspectives are very time-consuming and costly. In particular, there are uncertainties about how to deal with modifications in the scenarios. In principle, new consulting processes will be required. In our study, we show how multi-criteria decision analysis can be used to analyze stakeholders' attitudes toward transition paths. Since stakeholders differ regarding their preferences and time horizons, we employ a multi-criteria decision analysis approach to identify which stakeholders will support or oppose a transition path. We provide a flexible template for analyzing stakeholder preferences toward transition paths. This flexibility comes from the fact that our multi-criteria decision aid-based approach does not involve intensive empirical work with stakeholders. Instead, it involves subjecting assumptions to robustness analysis, which can help identify options to influence stakeholders' attitudes toward transitions.},
  language  = {en}
}
@article{AyalaHarrisKleefeldetal.2023,
  author    = {Ayala, Rafael Ceja and Harris, Isaac and Kleefeld, Andreas and Pallikarakis, Nikolaos},
  title     = {Analysis of the transmission eigenvalue problem with two conductivity parameters},
  series = {Applicable Analysis},
  journal   = {Applicable Analysis},
  publisher = {Taylor \& Francis},
  issn      = {0003-6811},
  doi       = {10.1080/00036811.2023.2181167},
  pages     = {37 Seiten},
  year      = {2023},
  abstract  = {In this paper, we provide an analytical study of the transmission eigenvalue problem with two conductivity parameters. We will assume that the underlying physical model is given by the scattering of a plane wave for an isotropic scatterer. In previous studies, this eigenvalue problem was analyzed with one conductive boundary parameter whereas we will consider the case of two parameters. We prove the existence and discreteness of the transmission eigenvalues as well as study the dependence on the physical parameters. We are able to prove monotonicity of the first transmission eigenvalue with respect to the parameters and consider the limiting procedure as the second boundary parameter vanishes. Lastly, we provide extensive numerical experiments to validate the theoretical work.},
  language  = {en}
}
@article{OhrtmannGolland2023,
  author    = {Ohrtmann, Jan-Peter and Golland, Alexander},
  title     = {Datenschutz \& Datenrecht - ein Ausblick auf 2023: Nationale Entwicklungen, EuGH-Vorlagen \& Aufsicht},
  series = {DSB Datenschutz-Berater},
  volume    = {2023},
  journal   = {DSB Datenschutz-Berater},
  number    = {3},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  pages     = {73 -- 75},
  year      = {2023},
  abstract  = {Die Verfasser vermitteln einen {\"U}berblick {\"u}ber die nationalen Gesetzgebungsverfahren und wesentliche EuGH-Vorlagefragen betreffend den Datenschutz und das Datenrecht f{\"u}r das Jahr 2023. Zun{\"a}chst folgen u.a. Hinweise in Bezug auf den Hinweisgeberschutz, die Verabschiedung der Einwilligungsverwaltungs-Verordnung zur Konkretisierung des \S 26 TTDSG und das Mobilit{\"a}tsdatengesetz. Anschließend werden Vorlagefragen deutscher Gerichte, die dem EuGH vorgelegt und bereits am 12.01.2023 beantwortet wurden, wie etwa C-154/21 und C-132/21 und die EuGH-Entscheidung vom 9.2.2023 (C-453/21), thematisiert. {\"U}berdies f{\"u}hren die Autoren wesentliche Entscheidungen des EuGH an, die im Jahr 2023 aus dem Bereich Datenrecht und Datenschutz zu erwarten seien. Auch Aktivit{\"a}ten der Datenschutzaufsicht auf nationaler und europ{\"a}ischer Ebene finden Erw{\"a}hnung. Die Verfasser machen abschließend auf besonders interessante Entscheidungen, die 2023 erwartet werden, wie etwa das EuGH-Urteil zum Auskunftsanspruch, sowie auf das Verh{\"a}ltnis des der Whistleblowing-RL umzusetzende Hinweisgeberschutzgesetz einerseits und Vorgaben des Datenschutzes andererseits, aufmerksam. Sie empfehlen, die k{\"u}nftige Rechtsprechung des EuGH im Blick zu behalten.},
  language  = {de}
}
@inproceedings{AltherrConzenElsenetal.2023,
  author    = {Altherr, Lena and Conzen, Max and Elsen, Ingo and Frauenrath, Tobias and Lyrmann, Andreas},
  title     = {Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.04},
  pages     = {31 -- 40},
  year      = {2023},
  abstract  = {Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems},
  language  = {en}
}
@inproceedings{SchulteSchwagerNoureldinetal.2023,
  author    = {Schulte, Jonas and Schwager, Christian and Noureldin, Kareem and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0148741},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.},
  language  = {en}
}
@masterthesis{Herrmann2023,
  type      = {Bachelor Thesis},
  author    = {Herrmann, Luna},
  title     = {Blind Shopping},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {104 Seiten},
  year      = {2023},
  abstract  = {Das Einkaufen in Einkaufszentren oder Ladenstraßen ist f{\"u}r Menschen ohne Sehbehinderung eine selbstverst{\"a}ndliche T{\"a}tigkeit. F{\"u}r Menschen mit Sehbehinderung gibt es bis heute keine M{\"o}glichkeit, sich ohne Hilfe von Familienmitgliedern, Freund:innen oder Pflegepersonal in einem Einkaufszentrum zurechtzufinden. Genau dieses Problem l{\"o}st "NAVON.". Er ist ein intelligenter und smarter Blindenstock, welcher durch Ultraschalldistanzsensoren fr{\"u}hzeitig Hindernisse erkennt und die M{\"o}glichkeit bietet, den Betroffenen durch das Einkaufszentrum zu lotsen. Die Logik des Systems liegt innerhalb des Handgriffs, welcher die wichtigsten Einstellungen bzgl. Sprache und haptischer Bedienelemente steuert. Ebenfalls gibt er dem Betroffenen auch ein haptisches Feedback, um Hindernisse fr{\"u}hzeitig umgehen zu k{\"o}nnen. "NAVON." ist ein wichtiger Ansatz f{\"u}r eine neue Kategorie von Produkten und Blindenst{\"o}cken. Dar{\"u}ber hinaus birgt das Konzept auch weitere Potenziale f{\"u}r {\"o}ffentliche Geb{\"a}ude ({\"A}mter, Krankenh{\"a}user, etc..).},
  language  = {de}
}
@masterthesis{Begas2023,
  type      = {Bachelor Thesis},
  author    = {Begas, Philipp},
  title     = {Modulares Regalsystem : Stauraumm{\"o}bel f{\"u}r den Bereich Office / Homeoffice},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {117 Seiten},
  year      = {2023},
  abstract  = {Das modulare Regalsystem „MOR{\´E}" ist ein Stauraumm{\"o}bel, welches sich im Bereich des (Home) Office einordnet. Das Produkt dient zur Aufbewahrung von B{\"u}romaterialien und verbessert die Ger{\"a}uschkulisse sowie die Beschaffenheit am Arbeitsplatz. Die potenzielle K{\"a}ufergruppe befindet sich im Alter von 25-67 Jahren, im gew{\"o}hnlichen Arbeitsalter Zeitraum (obere Mittelschicht). Im Fokus des Regalsystems steht der besonders freundliche Auf- und Abbau, welcher werkzeuglos erfolgt. Es ist in verschiedene Richtungen erweiterbar (Steckverbindung) und bietet unendlichen Spielraum der Gestaltung. Durch verschiedenfarbige Kennzeichnungen bietet das Regal ein Ordnungssystem, wodurch schnelleres Finden und Sortieren von Unterlagen m{\"o}glich ist (Grundordnung). Die R{\"u}ckw{\"a}nde dienen neben der Stabilit{\"a}t als Akustik-/ und Sichtschutz. Das Produkt passt sich jeder Raumsituation individuell an. Ist „MOR{\´E}" dein n{\"a}chstes Regalsystem?},
  language  = {de}
}
@masterthesis{Williams2023,
  type      = {Bachelor Thesis},
  author    = {Williams, Vivian},
  title     = {Entwicklung eines neuen Erscheinungsbildes f{\"u}r Die Staatliche Antikensammlung in M{\"u}nchen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {111 Seiten},
  year      = {2023},
  abstract  = {Die Staatliche Antikensammlung in M{\"u}nchen ist eine antike Kunstsammlung, bestehend aus zwei Kunsth{\"a}usern. Das Haus der Glyptothek befindet sich auf der Nordseite und die Antikensammlung auf der S{\"u}dseite des K{\"o}nigsplatzes. W{\"a}hrend die Glyptothek Skulpturen ausstellt, zeigt die Antikensammlung Gebrauchsgegenst{\"a}nde und Objekte aus der etruskischen, griechischen und r{\"o}mischen Epoche. Sie geh{\"o}rt mit ihrer Kunstsammlung zu den weltweit f{\"u}hrenden ihrer Art. In seinem Vorhaben, das Kulturerbe zu wahren, legt das Museum besonders hohen Wert auf Bildung und Vermittlung. Um dies langfristig zu gew{\"a}hrleisten, ist ein ausgeglichenes Erscheinungsbild zwischen Klassik und Modernit{\"a}t unentbehrlich. Die griechische Stilepoche zeichnet sich in ihrer abstrakten Nutzung von geometrischen Grundformen aus. Im Zusammenspiel von geometrischen Formen und Abstrahierungen entsteht ein neues Erscheinungsbild.},
  language  = {de}
}
@inproceedings{BungLangohrWaldenberger2023,
  author    = {Bung, Daniel Bernhard and Langohr, Phillip and Waldenberger, Lisa},
  title     = {Influence of cycle number in CFD studies of labyrinth weirs},
  series = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)},
  booktitle = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)},
  editor    = {Habersack, Helmut and Tritthart, Michael},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-833476-1-5},
  issn      = {L 2521-7119 (online)},
  doi       = {10.3850/978-90-833476-1-5_iahr40wc-p0531-cd},
  year      = {2023},
  abstract  = {The major advantage of labyrinth weirs over linear weirs is hydraulic efficiency. In hydraulic modeling efforts, this strength contrasts with limited pump capacity as well as limited computational power for CFD simulations. For the latter, reducing the number of investigated cycles can significantly reduce necessary computational time. In this study, a labyrinth weir with different cycle numbers was investigated. The simulations were conducted in FLOW-3D HYDRO as a Large Eddy Simulation. With a mean deviation of 1.75 \% between simulated discharge coefficients and literature design equations, a reasonable agreement was found. For downstream conditions, overall consistent results were observed as well. However, the orientation of labyrinth weirs with a single cycle should be chosen carefully under consideration of the individual research purpose.},
  language  = {en}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@article{TrappLammersEngudaretal.2023,
  author    = {Trapp, Svenja and Lammers, Tom and Engudar, Gokce and Hoehr, Cornelia and Denkova, Antonia G. and Paulßen, Elisabeth and de Kruijff, Robin M.},
  title     = {Membrane-based microfluidic solvent extraction of Ga-68 from aqueous Zn solutions: towards an automated cyclotron production loop},
  series = {EJNMMI Radiopharmacy and Chemistry},
  volume    = {2023},
  journal   = {EJNMMI Radiopharmacy and Chemistry},
  number    = {8, Article number: 9},
  publisher = {Springer Nature},
  issn      = {2365-421X},
  doi       = {10.1186/s41181-023-00195-2},
  pages     = {1 -- 14},
  year      = {2023},
  language  = {en}
}
@inproceedings{ChircuCzarneckiFriedmannetal.2023,
  author    = {Chircu, Alina and Czarnecki, Christian and Friedmann, Daniel and Pomaskow, Johanna and Sultanow, Eldar},
  title     = {Towards a Digital Twin of Society},
  series = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  booktitle = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  publisher = {University of Hawai'i},
  address   = {Honolulu},
  isbn      = {978-0-9981331-6-4},
  pages     = {6748 -- 6757},
  year      = {2023},
  abstract  = {This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.},
  language  = {en}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Hochfrequenztechnik. Komponenten und Mess-, Funk-, RFID- sowie Lokalisierungssysteme},
  edition   = {4},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-37825-7 (Print)},
  pages     = {XV, 453 Seiten},
  year      = {2023},
  abstract  = {Dieses Lehr- und Fachbuch vermittelt anschaulich die Grundlagen der HF-Technik, gibt konkrete Beschreibungen f{\"u}r den Entwurf von linearen Komponenten aus Bauteilen wie auch Leitungen f{\"u}r High-Speed- und HF-Schaltungen. Dem Leser wird vermittelt, wie Bauteile modelliert und Schaltungen synthetisiert und optimiert werden. Mit Hilfe frei verf{\"u}gbarer Simulationssoftware k{\"o}nnen GHz-Schaltungen selbst entwickelt werden. Viele {\"U}bungsbeispiele erm{\"o}glichen die Eigenkontrolle des Wissensstandes. Weiterhin werden komplexe nichtlineare Komponenten wie Hochfrequenzmischer, Oszillatoren und Synthesegeneratoren in ihrer Funktionalit{\"a}t dargestellt. Die neuen Mixed-Mode-Streuparameter sowie deren Leitungs- und Schaltungstechnik f{\"u}r Anwendungen der schnellen Digital- und der modernen HF-Technik sind ausf{\"u}hrlich beschrieben. Es wird auf Systeme f{\"u}r folgende Bereiche eingegangen: Streuparametermesstechnik, verschiedene Funktechniken, UHF-RFID und Lokalisierung- und Ortung. Dem Leser wird somit erm{\"o}glicht, komplexe GHz-Schaltungen insbesondere mit Halbleiter-, SMD- und LTCC-Schaltungen zu entwickeln.},
  language  = {de}
}
@article{RhodenBallGrajewskietal.2023,
  author    = {Rhoden, Imke and Ball, Christopher Stephen and Grajewski, Matthias and Kuckshinrich, Wilhelm},
  title     = {Reverse engineering of stakeholder preferences - A multi-criteria assessment of the German passenger car sector},
  series = {Renewable and Sustainable Energy Reviews},
  volume    = {181},
  journal   = {Renewable and Sustainable Energy Reviews},
  number    = {July 2023},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1364-0321},
  doi       = {10.1016/j.rser.2023.113352},
  pages     = {Article number: 113352},
  year      = {2023},
  abstract  = {Germany is a frontrunner in setting frameworks for the transition to a low-carbon system. The mobility sector plays a significant role in this shift, affecting different people and groups on multiple levels. Without acceptance from these stakeholders, emission targets are out of reach. This research analyzes how the heterogeneous preferences of various stakeholders align with the transformation of the mobility sector, looking at the extent to which the German transformation paths are supported and where stakeholders are located. Under the research objective of comparing stakeholders' preferences to identify which car segments require additional support for a successful climate transition, a status quo of stakeholders and car performance criteria is the foundation for the analysis. Stakeholders' hidden preferences hinder the derivation of criteria weightings from stakeholders; therefore, a ranking from observed preferences is used. This study's inverse multi-criteria decision analysis means that weightings can be predicted and used together with a recalibrated performance matrix to explore future preferences toward car segments. Results show that stakeholders prefer medium-sized cars, with the trend pointing towards the increased potential for alternative propulsion technologies and electrified vehicles. These insights can guide the improved targeting of policy supporting the energy and mobility transformation. Additionally, the method proposed in this work can fully handle subjective approaches while incorporating a priori information. A software implementation of the proposed method completes this work and is made publicly available.},
  language  = {en}
}
@article{SavitskayaZhantlessovaKistaubayevaetal.2023,
  author    = {Savitskaya, Irina and Zhantlessova, Sirina and Kistaubayeva, Aida and Ignatova, Ludmila and Shokatayeva, Dina and Sinyavsky, Yuriy and Kushugulova, Almagul and Digel, Ilya},
  title     = {Prebiotic cellulose-pullulan matrix as a "vehicle" for probiotic biofilm delivery to the host large intestine},
  series = {Polymers},
  journal   = {Polymers},
  number    = {16(1)},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/polym16010030},
  pages     = {Artikel 30},
  year      = {2023},
  abstract  = {This study describes the development of a new combined polysaccharide-matrix-based technology for the immobilization of Lactobacillus rhamnosus GG (LGG) bacteria in biofilm form. The new composition allows for delivering the bacteria to the digestive tract in a manner that improves their robustness compared with planktonic cells and released biofilm cells. Granules consisting of a polysaccharide matrix with probiotic biofilms (PMPB) with high cell density (>9 log CFU/g) were obtained by immobilization in the optimized nutrient medium. Successful probiotic loading was confirmed by fluorescence microscopy and scanning electron microscopy. The developed prebiotic polysaccharide matrix significantly enhanced LGG viability under acidic (pH 2.0) and bile salt (0.3\%) stress conditions. Enzymatic extract of feces, mimicking colon fluid in terms of cellulase activity, was used to evaluate the intestinal release of probiotics. PMPB granules showed the ability to gradually release a large number of viable LGG cells in the model colon fluid. In vivo, the oral administration of PMPB granules in rats resulted in the successful release of probiotics in the colon environment. The biofilm-forming incubation method of immobilization on a complex polysaccharide matrix tested in this study has shown high efficacy and promising potential for the development of innovative biotechnologies.},
  language  = {en}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - die Methoden},
  series = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  booktitle = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  editor    = {Herbig, Nicola and Poppelreuter, Stefan},
  edition   = {60. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0714-4},
  pages     = {Kapitel 10815},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@article{Timme2023,
  author    = {Timme, Michael},
  title     = {Die Erbringung einer Leistung in der irrigen Vorstellung einer Bestellung (Zu BGH, MDR 2023, 1439)},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {77},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {24},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-4202 (online)},
  doi       = {10.9785/mdtr-2023-772402},
  pages     = {R293 -- R296},
  year      = {2023},
  language  = {de}
}
@article{LuftLuftArntz2023,
  author    = {Luft, Angela and Luft, Nils and Arntz, Kristian},
  title     = {A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0},
  series = {Applied Sciences},
  volume    = {2023},
  journal   = {Applied Sciences},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app13137610},
  pages     = {23 Seiten},
  year      = {2023},
  abstract  = {Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems' fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.},
  language  = {en}
}
@incollection{Kurz2023,
  author    = {Kurz, Melanie},
  title     = {Waffen und milit{\"a}rische Ausr{\"u}stung in Systemspielzeugwelten},
  series = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer},
  booktitle = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer},
  publisher = {avedition},
  address   = {Stuttgart},
  isbn      = {978-3-89986-396-3},
  pages     = {104 -- 121},
  year      = {2023},
  language  = {de}
}
@article{HengsbachEngelCwienczeketal.2023,
  author    = {Hengsbach, Jan-Niklas and Engel, Mareike and Cwienczek, Marcel and Stiefelmaier, Judith and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Scalable unseparated bioelectrochemical reactors by using a carbon fiber brush as stirrer and working electrode},
  series = {ChemElectroChem},
  volume    = {10},
  journal   = {ChemElectroChem},
  number    = {21},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {2196-0216},
  doi       = {10.1002/celc.202300440},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {The concept of energy conversion into platform chemicals using bioelectrochemical systems (BES) has gained increasing attention in recent years, as the technology simultaneously provides an opportunity for sustainable chemical production and tackles the challenge of Power-to-X technologies. There are many approaches to realize the industrial scale of BES. One concept is to equip standard bioreactors with static electrodes. However, large installations resulted in a negative influence on various reactor parameters. In this study, we present a new single-chamber BES based on a stirred tank reactor in which the stirrer was replaced by a carbon fiber brush, performing the functions of the working electrode and the stirrer. The reactor is characterized in abiotic studies and electro-fermentations with Clostridium acetobutylicum. Compared to standard reactors an increase in butanol production of 20.14±3.66 \% shows that the new BES can be efficiently used for bioelectrochemical processes.},
  language  = {en}
}
@misc{BragardHueningKowalewski2023,
  author    = {Bragard, Michael and H{\"u}ning, Felix and Kowalewski, Paul},
  title     = {Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift]},
  year      = {2023},
  abstract  = {Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gew{\"a}hlt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege {\"u}berdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege {\"u}berdeckt ist.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - die Methoden},
  series = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  booktitle = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  editor    = {Thomann, Hermann and Tr{\"a}ger, Thomas},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0473-0},
  pages     = {Kapitel 08631},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@article{ElBerguiAbouabdillahBouriougetal.2023,
  author    = {El Bergui, Omnia and Abouabdillah, Aziz and Bourioug, Mohamed and Schmitz, Dominik and Biel, Markus and Aboudrare, Abdellah and Krauss, Manuel and Jomaa, Ahlem and Romuli, Sebastian and M{\"u}ller, Joachim and Fagroud, Mustapha and Bouabid, Rachid},
  title     = {Innovative solutions for drought: Evaluating hydrogel application on onion cultivation (Allium cepa) in Morocco},
  series = {Water},
  volume    = {15},
  journal   = {Water},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/w15111972},
  pages     = {Artikel 1972},
  year      = {2023},
  abstract  = {Throughout the last decade, and particularly in 2022, water scarcity has become a critical concern in Morocco and other Mediterranean countries. The lack of rainfall during spring was worsened by a succession of heat waves during the summer. To address this drought, innovative solutions, including the use of new technologies such as hydrogels, will be essential to transform agriculture. This paper presents the findings of a study that evaluated the impact of hydrogel application on onion (Allium cepa) cultivation in Meknes, Morocco. The treatments investigated in this study comprised two different types of hydrogel-based soil additives (Arbovit® polyacrylate and Huminsorb® polyacrylate), applied at two rates (30 and 20 kg/ha), and irrigated at two levels of water supply (100\% and 50\% of daily crop evapotranspiration; ETc). Two control treatments were included, without hydrogel application and with both water amounts. The experiment was conducted in an open field using a completely randomized design. The results indicated a significant impact of both hydrogel-type dose and water dose on onion plant growth, as evidenced by various vegetation parameters. Among the hydrogels tested, Huminsorb® Polyacrylate produced the most favorable outcomes, with treatment T9 (100\%, HP, 30 kg/ha) yielding 70.55 t/ha; this represented an increase of 11 t/ha as compared to the 100\% ETc treatment without hydrogel application. Moreover, the combination of hydrogel application with 50\% ETc water stress showed promising results, with treatment T4 (HP, 30 kg, 50\%) producing almost the same yield as the 100\% ETc treatment without hydrogel while saving 208 mm of water.},
  language  = {en}
}
@article{AbbasHedwigBalcetal.2023,
  author    = {Abbas, Karim and Hedwig, Lukas and Balc, Nicolae and Bremen, Sebastian},
  title     = {Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling},
  series = {Polymers},
  volume    = {2023},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/polym15214293},
  pages     = {Artikel 4293},
  year      = {2023},
  abstract  = {Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK's economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100\% solid and subjected to thermal post-treatment. This corresponds to a 20\% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15\% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70\% in tool production.},
  language  = {en}
}
@article{FayyaziSardarThomasetal.2023,
  author    = {Fayyazi, Mojgan and Sardar, Paramjotsingh and Thomas, Sumit Infent and Daghigh, Roonak and Jamali, Ali and Esch, Thomas and Kemper, Hans and Langari, Reza and Khayyam, Hamid},
  title     = {Artificial intelligence/machine learning in energy management systems, control, and optimization of hydrogen fuel cell vehicles},
  volume    = {15},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/su15065249},
  pages     = {38},
  year      = {2023},
  abstract  = {Environmental emissions, global warming, and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies, hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However, energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand, there has been significant progress in artificial intelligence, machine learning, and designing data-driven intelligent controllers. These techniques have found much attention within the community, and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction, control, energy management, and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve, classify, and compare, and future trends and directions for sustainability are discussed.},
  language  = {en}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise - die Methoden},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  edition   = {54. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05531},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise - das Mindset},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  edition   = {54. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05530},
  year      = {2023},
  abstract  = {Teamsitzungen, Arbeitsgruppentreffen, Kickoffs und Meetings - sie alle werden mit dem Ziel durchgef{\"u}hrt, innerhalb einer vorgegebenen Zeitspanne ein gemeinsames Arbeitsziel zu erreichen. Damit die Zielerreichung auch bei komplexeren Arbeitsauftr{\"a}gen nicht vom Zufall abh{\"a}ngt, empfiehlt es sich, die Leitung des Ablaufs einem Moderator zu {\"u}bertragen. In diesem Beitrag einer dreiteiligen Serie wird beschrieben, {\"u}ber welches Mindset der Moderator verf{\"u}gen sollte, welche grunds{\"a}tzlichen Methoden hilfreich sind und was bei der Onlinemoderation im Besonderen zu beachten ist.},
  language  = {de}
}
@article{BoehnertBlaschkeBiewendt2023,
  author    = {B{\"o}hnert, Arno and Blaschke, Florian and Biewendt, Marcel},
  title     = {Impact of sustainability on the strategic direction of luxury companies},
  series = {European Journal of Marketing and Economics},
  volume    = {6},
  journal   = {European Journal of Marketing and Economics},
  number    = {1},
  publisher = {Revistia},
  address   = {London},
  issn      = {2601-8659},
  pages     = {70 -- 85},
  year      = {2023},
  abstract  = {Today's society is undergoing a paradigm shift driven by the megatrend of sustainability. This undeniably affects all areas of Western life. This paper aims to find out how the luxury industry is dealing with this change and what adjustments are made by the companies. For this purpose, interviews were conducted with managers from the luxury industry, in which they were asked about specific measures taken by their companies as well as trends in the industry. In a subsequent evaluation, the trends in the luxury industry were summarized for the areas of ecological, social, and economic sustainability. It was found that the area of environmental sustainability is significantly more focused than the other sub-areas. Furthermore, the need for a customer survey to validate the industry-based measures was identified.},
  language  = {en}
}
@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}
@masterthesis{Heising2023,
  type      = {Bachelor Thesis},
  author    = {Heising, Michelle},
  title     = {Nachhaltige Gestaltung im urbanen {\"o}ffentlichen Raum : erneuerbare Energien in Begegnungsr{\"a}ume integrieren},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {83 Seiten},
  year      = {2023},
  abstract  = {RƎURB (Reurbanization \& Renewable Energy) ist ein Konzept zur Integration von erneuerbaren Energien in einen urbanen Begegnungsraum. Es beinhaltet das Design eines skulpturalen Kleinwindkraftwerks und eines Solar-Pavillons mit einer Sitzlandschaft f{\"u}r einen energieautarken, {\"o}ffentlichen Platz. Durch die Integration eines W-LAN Hotspots und Ladem{\"o}glichkeiten in der Sitzlandschaft bringt RƎURB nicht nur gr{\"u}nen Strom in die Stadt, sondern gew{\"a}hrleistet der Bev{\"o}lkerung auch Zugang zur Digitalisierung und einen kostenlosen Arbeitsraum. Windturbine: Herk{\"o}mmliche Windr{\"a}der k{\"o}nnen in der Stadt nicht genutzt werden. Die RƎURB-Winds{\"a}ule ist darauf spezialisiert, die urbanen Winde aus allen Richtungen aufzunehmen und funktioniert schon bei einem leichten Windstoß. Durch das elegante Design lassen sich die Technologien als {\"a}sthetischen Blickfang in das moderne Stadtbild integrieren.},
  language  = {de}
}
@misc{Benavides2023,
  type      = {Master Thesis},
  author    = {Benavides, Lucie},
  title     = {INKAS : User Experience und User Interface einer bestehenden CPQ-Webanwendung zur Erstellung von Konfiguratoren f{\"u}r variantenreiche Produkte.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {191 Seiten},
  year      = {2023},
  abstract  = {Im Rahmen dieser Masterarbeit wird die komplexe CPQ-Branchenl{\"o}sung INKAS der it-motive AG konzeptionell und gestalterisch {\"u}berarbeitet. Die mehrj{\"a}hrige Entwicklung von INKAS und etlicher separater Komponenten hat zu einer zum Teil inkonsistenten Oberfl{\"a}che gef{\"u}hrt, die Schwierigkeiten bei der Benutzung aufweist. Das neue User Interface, welches diese Masterarbeit entwickelt, soll durch einheitliche Interaktionsprinzipien zum einen die Usability und bestehende Funktionalit{\"a}ten verbessern und zum anderen neue Funktionen leichter integrierbar machen. Diese Masterarbeit demonstriert somit ein Vorgehensmodell, durch welches komplexe existierende Branchenl{\"o}sungen mithilfe eines nutzerzentrierten Redesigns eine nachhaltig verbesserte Produktqualit{\"a}t erreichen und die Integration neuer Technologien erm{\"o}glicht. In diesem Zusammenhang wird auch exemplarisch aufgezeigt, wie Designleistungen methodisch in bestehende agile Softwareentwicklungsprozesse integriert werden k{\"o}nnen.},
  language  = {de}
}
@masterthesis{Hatke2023,
  type      = {Bachelor Thesis},
  author    = {Hatke, Lars},
  title     = {X Plore: human hybrid submarine},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {153 Seiten},
  year      = {2023},
  abstract  = {Das „X Plore" ist ein human hybrid angetriebenes Tauchboot, welches sowohl f{\"u}r den touristischen als auch privaten Gebrauch konzipiert ist. Das immersive Design des „X Plore" sorgt f{\"u}r ein eindrucksvolles Taucherlebnis. Das Konzept soll die Menschen {\"u}ber die aktuelle Not der Meere und ihrer Lebewesen aufkl{\"a}ren und ihnen gleichzeitig die M{\"o}glichkeit geben, der Unterwasserwelt n{\"a}her zukommen. Zudem soll es diese erhalten und ihre Bewohner:innen sch{\"u}tzen. Des Weiteren thematisiert die Arbeit zukunftsorientierte Antriebs- und Batterietechniken und setzt sich mit der sinnvollen Integrierung dieser auseinander.},
  language  = {de}
}
@masterthesis{Hetterle2023,
  type      = {Bachelor Thesis},
  author    = {Hetterle, Lukas},
  title     = {Breathe},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {113 Seiten},
  year      = {2023},
  abstract  = {Ein nachhaltiges, autonomes Fahrzeug, das in einer extrem schnellen und hektischen Welt, gepr{\"a}gt durch Digitalisierung und Urbanisierung, einen Moment der Ruhe bieten soll; eine Pause von der st{\"a}ndigen Flut von Eindr{\"u}cken und Informationen. Ein immersives Design, das meditative und kreative Prozesse unterst{\"u}tzt und Mensch-Mensch sowie Mensch-Natur Begegnungen f{\"o}rdert.},
  language  = {de}
}
@masterthesis{Kleen2023,
  type      = {Bachelor Thesis},
  author    = {Kleen, Mareike},
  title     = {Pendelleuchte aus Glas},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {127 Seiten},
  year      = {2023},
  abstract  = {Glas ist seit jeher ein faszinierender Werkstoff. Es findet Anwendung in zahlreichen Gebieten und bietet als Material f{\"u}r Leuchten eine besondere Eleganz. Die Pendelleuchte „Calice di fiori" vereint handwerkliche Kunstfertigkeit und komfortables Design. Sie ist aus mundgeblasenem Glas gefertigt und verleiht durch ihre F{\"a}rbung eine kraftvolle und dynamische Atmosph{\"a}re im Raum. Das besondere Merkmal der Pendelleuchte ist eine {\"O}ffnung, die eine einfache und intuitive Montage erleichtert. Die Pendelleuchte ist mit energieeffizienten LEDs ausgestattet und l{\"a}sst sich mit einem Smart-Home-System bedienen. Die Lichtintensit{\"a}t und Lichtfarbe k{\"o}nnen den individuellen Bed{\"u}rfnissen angepasst werden. „Calice di fiori" mit schnell abnehmbarem Leuchtenschirm f{\"u}gt sich in modern eingerichtete R{\"a}ume ein und bringt einen Hauch Bl{\"u}tenflair mit sich.},
  language  = {de}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}
@masterthesis{Kuck2023,
  type      = {Bachelor Thesis},
  author    = {Kuck, Fabian},
  title     = {Commuter Zone : R{\"u}ckzugsort f{\"u}r Pendelnde zum Ausgleich ihrer Reisezeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {103 Seiten},
  year      = {2023},
  abstract  = {Die „Commuter Zone" setzt sich mit dem Zeitverlust Pendelnder auseinander. Berufliche Ziele treiben immer mehr Menschen an, l{\"a}ngere Strecken zur{\"u}ckzulegen. Dabei b{\"u}ßen sie den Zeitaufwand an privater Stelle ein. Als R{\"u}ckzugsort f{\"u}r Alleinreisende schafft die „Commuter Zone" ein effektiv nutzbares Zeitfenster. Dazu wird die R{\"u}cksichtnahme der Routinierten zueinander genutzt und gef{\"o}rdert. Sitz- und Arbeitsfl{\"a}chen lassen sich zur{\"u}ckklappen und erleichtern das Aussteigen. Der begrenzte Raum wird intensiv genutzt. So entsteht Komfort durch die Zuversicht, einen Sitzplatz zu erhalten. Und dank der Zusammensetzung der Sitzkonstellation bleibt das Arbeitsgeschehen privat. Letztlich bietet die „Commuter Zone" den zunehmend selbstbestimmenden Besch{\"a}ftigten neue M{\"o}glichkeiten zur Arbeitseinteilung und schafft Qualit{\"a}tszeit im Privaten.},
  language  = {de}
}
@article{Golland2023,
  author    = {Golland, Alexander},
  title     = {Immaterieller Schadensersatz bei Datenschutzverst{\"o}ßen - EuGH tariert aus},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  volume    = {2023},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {26},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1845 -- 1845},
  year      = {2023},
  abstract  = {Umsatzbasierte Bußgelder - wie sonst nur aus dem Kartellrecht bekannt - waren einer der Gr{\"u}nde, warum die Datenschutz-Grundverordnung (DSGVO) vor ihrem Inkrafttreten f{\"u}r erhebliches Aufsehen sorgte. Die vielfach relevanteren Schadensersatzanspr{\"u}che, die, wie bei „Dieselgate", aufgrund der Vielzahl von betroffenen Personen und der aus Sicht von Rechtsdienstleistern bestehenden Skalierbarkeit mit weitaus h{\"o}heren Einbußen f{\"u}r Unternehmen einhergehen k{\"o}nnen, blieben zun{\"a}chst unbeachtet. Inzwischen ist der Schadensersatzanspruch gem. Art. 82 DSGVO die Vorschrift, die die meisten Vorlagen zum Europ{\"a}ischen Gerichtshof (EuGH) der letzten Jahre hervorgerufen hat. Am 4.5.2023 hat nun der EuGH (Urteil v. 4.5.2023 - Rs. C-300/21, NWB GAAAJ-41389) in einem Grundsatzurteil {\"u}ber zentrale Fragen rund um den Ersatz immaterieller Sch{\"a}den als Folge von Datenschutzverst{\"o}ßen entschieden.},
  language  = {de}
}
@masterthesis{GarciaLange2023,
  type      = {Bachelor Thesis},
  author    = {Garcia Lange, Ayari},
  title     = {FIELDPRO : Integrated equipment system for traveling journalists},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {96 Seiten},
  year      = {2023},
  abstract  = {In today's ultra-connected world, the significance of audio-visual documentation is rapidly growing. Technological advancements have made it more accessible to obtain powerful and compact audio-visual equipment, thereby reducing the dependency on a larger team for the documentation process. This has favoured the development of what is known as backpack journalism. This project meets an unmet market need and presents an opportunity for innovative product development. It focuses on backpack journalists working in remote and challenging conditions with unpredictable transportation and working conditions. The proposed backpack design addresses both transport and working setups. Offering a robust and waterproof yet overall lightweight construction for easy equipment carrying, while also providing an extension of the workspace for essential gear.},
  language  = {de}
}
@masterthesis{Waliszewska2023,
  type      = {Bachelor Thesis},
  author    = {Waliszewska, Laura},
  title     = {Werkstatt voller Historie},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {35 Seiten},
  year      = {2023},
  abstract  = {Das Buch „Werkstatt voller Historie" gibt einen Einblick in das Handwerk der Restaurierung und Konservierung. Wir leben in einer Gesellschaft, die von Konsum und schneller Verf{\"u}gbarkeit gepr{\"a}gt ist. Produkte werden in Massen produziert, genutzt und oft schon nach kurzer Zeit wieder weggeworfen. Durch diese Mentalit{\"a}t der Wegwerfgesellschaft werden die Ressourcen unserer Erde ersch{\"o}pft, und Umweltprobleme werden immer gr{\"o}ßer. Deshalb ist es wichtig, sich intensiv mit der Bewahrung von Kulturgut auseinanderzusetzen. Durch die Verwendung von Illustrationen und visuellen Darstellungen erleichtert das Buch die Kommunikation. Dadurch kann der Restaurierungsprozess einfacher verstanden werden. Mit dem Projekt soll das Interesse geweckt und {\"u}ber die Grundlagen und Herausforderungen der Restaurierung aufgekl{\"a}rt werden.},
  language  = {de}
}
@masterthesis{Tschiersch2023,
  type      = {Bachelor Thesis},
  author    = {Tschiersch, Lina Sofie},
  title     = {Cooking for wellbeing : K{\"u}chensystem f{\"u}r Menschen mit Alzheimer-Demenz},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {97 Seiten},
  year      = {2023},
  abstract  = {Essen zuzubereiten bedeutet f{\"u}r viele Menschen Normalit{\"a}t, es bestimmt Teile ihrer Identit{\"a}t und ist eng verbunden mit Familie und Kultur. Der Beginn der Alzheimererkrankung erschwert diese T{\"a}tigkeit, oft muss sie aus Sicherheitsgr{\"u}nden aufgegeben werden. Kochen als Therapieansatz hat zur Verbesserung der Aktivit{\"a}t und Verringerung von Stress beigetragen. Pila ist ein K{\"u}chensystem, das Kochenthusiasten begleitet und Selbstst{\"a}ndigkeit sowie Partizipation erm{\"o}glicht. Das Kompetenzgef{\"u}hl, die Autonomie und die Verbundenheit zu betreuenden Personen st{\"a}rken das Wohlbefinden. Das System f{\"u}hrt die Nutzerinnen und Nutzer digital durch alle Phasen von der Vorbereitung bis zum Aufr{\"a}umen. Aus den Elementen entsteht ein klar organisierter Arbeitsplatz ohne Ablenkungen und mit eindeutigen Aktionspunkten. Die Funktionen der Kocheinheit sind simplifiziert und bed{\"u}rfnisgerecht angepasst.},
  language  = {de}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Mikrowellentechnik : Feldsimulation, nichtlineare Schaltungstechnik, Komponenten und Subsysteme, Plasmatechnik, Antennen und Ausbreitung},
  edition   = {2. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41286-9},
  doi       = {10.1007/978-3-658-41287-6},
  pages     = {XVI, 394 Seiten},
  year      = {2023},
  abstract  = {Das Lehrbuch behandelt alle Aspekte, die den aktuellen Stand der GHz-Technik betreffen. Das Buch behandelt die verschiedenen numerischen Feldsimulationsverfahren. Mit vielen modernen Themen.},
  language  = {de}
}