@incollection{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Stahlbeton und Spannbeton nach Eurocode 2},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_12},
  pages     = {497 -- 655},
  year      = {2015},
  language  = {de}
}
@incollection{Feiser2015,
  author    = {Feiser, Johannes},
  title     = {Geotechnik},
  series = {Wendehorst Bautechnische Zahlentafeln / 35. Auflage},
  booktitle = {Wendehorst Bautechnische Zahlentafeln / 35. Auflage},
  editor    = {Vismann, Ulrich},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01688-3 (Print)},
  doi       = {10.1007/978-3-658-01689-0_17},
  pages     = {1019 -- 1101},
  year      = {2015},
  abstract  = {In der nationalen und der europ{\"a}ischen Normung werden die geotechnischen Aufgaben zwecks Mindestanforderungen an Baugrunduntersuchung, rechnerische Nachweise und {\"U}berwachung der Ausf{\"u}hrung in drei Klassen (Kategorien) eingeteilt. Sie richten sich nach der zu erwartenden Reaktion des Baugrundes, nach dem geotechnischen Schwierigkeitsgrad des Tragwerks und seiner Einfl{\"u}sse auf die Umgebung. In DIN 4020 wurde die Einteilung bez{\"u}glich Art und Umfang der geotechnischen Untersuchungen bereits verbindlich eingef{\"u}hrt.},
  language  = {de}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{Timme2015,
  author    = {Timme, Michael},
  title     = {K{\"u}ndigung - Die Vorhersehbarkeit eines zuk{\"u}nftigen Eigenbedarfs f{\"u}r den Vermieter},
  series = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  volume    = {69},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  number    = {9},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  pages     = {489 -- 490},
  year      = {2015},
  language  = {de}
}
@incollection{Timme2015,
  author    = {Timme, Michael},
  title     = {Wettbewerbsregeln (\S\S 24-27)},
  series = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:},
  booktitle = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-65462-6},
  pages     = {267 -- 286},
  year      = {2015},
  language  = {de}
}
@article{Fissabre2015,
  author    = {Fissabre, Anke},
  title     = {Konstruktion und Raumform im Kirchenbau der Moderne : Die L{\"a}ngsbinderkirchen von Hans Herkommer},
  series = {In situ : Zeitschrift f{\"u}r Architekturgeschichte},
  volume    = {7},
  journal   = {In situ : Zeitschrift f{\"u}r Architekturgeschichte},
  number    = {1},
  publisher = {Wernersche Verlagsgesellschaft},
  address   = {Worms},
  issn      = {1866-959X},
  pages     = {117 -- 124},
  year      = {2015},
  language  = {de}
}
@incollection{Strohmeier2015,
  author    = {Strohmeier, Andreas},
  title     = {Siedlungswasserwirtschaft},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01688-3},
  pages     = {1157 -- 1230},
  year      = {2015},
  language  = {de}
}
@incollection{Biener2015,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01688-3},
  pages     = {1231 -- 1260},
  year      = {2015},
  language  = {de}
}
@article{SchneiderSchneiderMeinhardtetal.2015,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Meinhardt, Kerstin and Kinder, Stephanie},
  title     = {Die Fallstudie : Aufstellung eines Anlagespiegels},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {44},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {5},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  year      = {2015},
  language  = {de}
}
@article{WarmerWagnerSchoeningetal.2015,
  author    = {Warmer, Johannes and Wagner, Patrick and Sch{\"o}ning, Michael Josef and Kaul, Peter},
  title     = {Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431882},
  pages     = {1289 -- 1298},
  year      = {2015},
  language  = {en}
}
@article{DelleHuckBaeckeretal.2015,
  author    = {Delle, Lotta E. and Huck, Christina and B{\"a}cker, Matthias and M{\"u}ller, Frank and Grandthyll, Samuel and Jacobs, Karin and Lilischkis, Rainer and Vu, Xuan T. and Sch{\"o}ning, Michael Josef and Wagner, Patrick and Thoelen, Roland and Weil, Maryam and Ingebrandt, Sven},
  title     = {Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431863},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@article{Timme2015,
  author    = {Timme, Michael},
  title     = {Versagung von Pkh trotz Zulassung der Revi­sion wegen grunds{\"a}tzlicher Bedeutung},
  series = {Neue Juristische Wochenschrift (NJW)},
  journal   = {Neue Juristische Wochenschrift (NJW)},
  number    = {30},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0341-1915},
  pages     = {2173 -- 2175},
  year      = {2015},
  language  = {de}
}
@inproceedings{WallnoeferDrathHuening2015,
  author    = {Walln{\"o}fer, Armin and Drath, Rainer and H{\"u}ning, Felix},
  title     = {Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen},
  series = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  booktitle = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092258-4},
  pages     = {1 CD-ROM},
  year      = {2015},
  language  = {de}
}
@incollection{KuemmellHillgaertner2015,
  author    = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael},
  title     = {Inductive charging comfortable and nonvisible charging stations for urbanised areas},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_16},
  pages     = {297 -- 309},
  year      = {2015},
  abstract  = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.},
  language  = {en}
}
@article{TakenagaSchneiderErbayetal.2015,
  author    = {Takenaga, Shoko and Schneider, Benno and Erbay, E. and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201532053},
  pages     = {1347 -- 1352},
  year      = {2015},
  abstract  = {A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.},
  language  = {en}
}
@book{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Wendehorst Beispiele aus der Baupraxis / Ulrich Vismann (Hrsg.). - 5., durchges. und aktualis. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01680-7 (print) ; 978-3-658-01681-4 (e-Book)},
  doi       = {10.1007/978-3-658-01681-4},
  pages     = {XIII, 774 S.},
  year      = {2015},
  language  = {de}
}
@incollection{VismannSchueller2015,
  author    = {Vismann, Ulrich and Sch{\"u}ller, Michael},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01680-7 ; 978-3-658-01681-4},
  doi       = {10.1007/978-3-658-01681-4_9},
  pages     = {243 -- 322},
  year      = {2015},
  abstract  = {Das Kapitel Stahlbetonbau besteht aus einer Formelsammlung (Teil A) sowie einem Praxisbeispiel (Teil B). In dem Praxisbeispiel werden exemplarisch die erforderlichen Rechenschritte und Nachweise zur Bemessung im GZT und GZG nach Eurocode 2 [1] vorgestellt. Die Hinweise im Text beziehen sich, soweit nicht explizit erw{\"a}hnt, auf Wendehorst, Bautechnische Zahlentafeln, 35. Auflage, „Stahlbeton- und Spannbetonbau nach Eurocode 2" [2]. Die zum Praxisbeispiel zugeh{\"o}rigen Konstruktions- und Bewehrungszeichnungen stehen im Onlineportal zu diesem Buch zum kostenlosen Download bereit (siehe unter www.springer.com).},
  language  = {de}
}
@incollection{Feiser2015,
  author    = {Feiser, Johannes},
  title     = {Geotechnik},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_14},
  pages     = {547 -- 598},
  year      = {2015},
  language  = {de}
}
@incollection{Strohmeier2015,
  author    = {Strohmeier, Andreas},
  title     = {Siedlungswasserwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_16},
  pages     = {635 -- 678},
  year      = {2015},
  abstract  = {Nachfolgende Ausf{\"u}hrungen und Berechnungsbeispiele beziehen sich auf Kapitel 19 Siedlungswasserwirtschaft im „Wendehorst: Bautechnische Zahlentafeln 35. Auflage 2015" (abgek{\"u}rzt: BZ). F{\"u}r den Bau von Anlagen der Siedlungswasserwirtschaft sind ebenso die Grundlagen der Hydraulik zu ber{\"u}cksichtigen. Aus diesem Grunde sind auch die entsprechenden Ausf{\"u}hrungen zur Hydraulik zu beachten.},
  language  = {de}
}
@incollection{Biener2015,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_17},
  pages     = {680 -- 723},
  year      = {2015},
  language  = {de}
}
@article{OberlaenderKirchnerKeusgenetal.2015,
  author    = {Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials},
  series = {Electrochimica Acta},
  volume    = {183},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2015.06.126},
  pages     = {130 -- 136},
  year      = {2015},
  abstract  = {The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor's thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).},
  language  = {en}
}
@article{KuperjansWeitzel2015,
  author    = {Kuperjans, Isabel and Weitzel, J.},
  title     = {Energiedesign 2020 : Sichere Strom- und W{\"a}rmeversorgung f{\"u}r die Industrie},
  series = {TAB: das Fachmedium der TGA-Branche},
  journal   = {TAB: das Fachmedium der TGA-Branche},
  number    = {3},
  publisher = {Bauverlag},
  address   = {G{\"u}tersloh},
  issn      = {0341-2032},
  pages     = {105 -- 107},
  year      = {2015},
  language  = {de}
}
@article{HoevelerJanserBindewaldetal.2015,
  author    = {Hoeveler, Bastian and Janser, Frank and Bindewald, Thorsten and Gebhardt, Andreas},
  title     = {Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {12},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42921},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {de}
}
@article{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {elektroniknet.de},
  journal   = {elektroniknet.de},
  year      = {2015},
  language  = {de}
}
@inproceedings{BreuerRaueMangetal.2015,
  author    = {Breuer, Lars and Raue, Markus and Mang, Thomas and Sch{\"o}ning, Michael Josef and Thoelen, Ronald and Wagner, Torsten},
  title     = {Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications},
  series = {12. Dresdner Sensor-Symposium 2015},
  booktitle = {12. Dresdner Sensor-Symposium 2015},
  doi       = {10.5162/12dss2015/P5.8},
  pages     = {206 -- 209},
  year      = {2015},
  language  = {en}
}
@inproceedings{OberlaenderJildehKirchneretal.2015,
  author    = {Oberl{\"a}nder, Jan and Jildeh, Zaid B. and Kirchner, Patrick and Wendeler, Luisa and Bromm, Alexander and Iken, Heiko and Wagner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes},
  series = {12. Dresdner Sensor-Symposium 2015},
  booktitle = {12. Dresdner Sensor-Symposium 2015},
  doi       = {10.5162/12dss2015/P3.11},
  pages     = {163 -- 168},
  year      = {2015},
  language  = {en}
}
@article{MiyamatoSakakitaWagneretal.2015,
  author    = {Miyamato, Ko-ichiro and Sakakita, Sakura and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface},
  series = {Electrochimica Acta},
  volume    = {183},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2015.07.184},
  pages     = {137 -- 142},
  year      = {2015},
  abstract  = {The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.},
  language  = {en}
}
@article{HauserKotliarTholenetal.2015,
  author    = {Hauser, C. and Kotliar, Konstantin and Tholen, S. and Hasenau, A. and Suttmann, Y. and Renders, L. and Heemann, U. and Baumann, M. and Schmaderer, C.},
  title     = {Dynamische retinale Gef{\"a}ßreaktion bei H{\"a}modialysepatienten},
  series = {Nieren- und Hochdruckkrankheiten},
  volume    = {44},
  journal   = {Nieren- und Hochdruckkrankheiten},
  number    = {11},
  publisher = {Dustri-Verlag},
  address   = {Oberhaching},
  issn      = {0300-5224},
  doi       = {10.5414/NHX01743a},
  pages     = {480 -- 480},
  year      = {2015},
  language  = {de}
}
@article{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {3D-Druck ist {\"u}berall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, H{\"a}user, Waffen, B{\"u}sten, Musikinstrumente - alles geht},
  series = {Kunststoffe},
  volume    = {105},
  journal   = {Kunststoffe},
  number    = {10},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  issn      = {0023-5563},
  pages     = {62 -- 70},
  year      = {2015},
  language  = {de}
}
@inproceedings{RoosenFeyerl2015,
  author    = {Roosen, Petra and Feyerl, G{\"u}nter},
  title     = {Gender-specific perception and utilization of personal use vehicles},
  series = {FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1},
  booktitle = {FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-5108-0209-4},
  pages     = {418 -- 425},
  year      = {2015},
  language  = {en}
}
@inproceedings{KilicRaatschenAstanehAsletal.2015,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.},
  title     = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge},
  series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781138027572},
  pages     = {1169 -- 1173},
  year      = {2015},
  language  = {en}
}
@article{FischerSelverGezeretal.2015,
  author    = {Fischer, Felix and Selver, M. Alper and Gezer, Sinem and Dicle, Oguz and Hillen, Walter},
  title     = {Systematic Parameterization, Storage, and Representation of Volumetric DICOM Data},
  series = {Journal of Medical and Biological Engineering},
  volume    = {35},
  journal   = {Journal of Medical and Biological Engineering},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2199-4757},
  doi       = {10.1007/s40846-015-0097-5},
  pages     = {709 -- 723},
  year      = {2015},
  language  = {en}
}
@inproceedings{HorikawaKazariOkadaetal.2015,
  author    = {Horikawa, Atsushi and Kazari, Masahide and Okada, Kunio and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haji Ayed, Anis},
  title     = {Developments of Hydrogen Dry Low Emission Combustion Technology},
  series = {Annual Congress of Gas Turbine Society Japan, 2015},
  booktitle = {Annual Congress of Gas Turbine Society Japan, 2015},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@book{JanserHavermann2015,
  author    = {Janser, Frank and Havermann, Marc},
  title     = {Inkompressible Str{\"o}mungen},
  edition   = {3. Aufl.},
  publisher = {Verlagshaus Mainz GmbH},
  address   = {Aachen},
  isbn      = {978-3-86130-446-3},
  pages     = {VIII, 83 S. : Ill ; Diagramme},
  year      = {2015},
  language  = {de}
}
@article{FredebeulKrein2015,
  author    = {Fredebeul-Krein, Markus},
  title     = {Volkswirtschaftslehre : Die Klausur},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Pr{\"u}fung, Berufseinstieg und Fortbildung},
  volume    = {45},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Pr{\"u}fung, Berufseinstieg und Fortbildung},
  number    = {11},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {1253 -- 1255},
  year      = {2015},
  language  = {de}
}
@article{FredebeulKrein2015,
  author    = {Fredebeul-Krein, Markus},
  title     = {Wettbewerbspolitische Leitbilder},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {45},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {4},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {483 -- 486},
  year      = {2015},
  language  = {de}
}
@inproceedings{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Wireless systems for machinery safety : Requirements and solutions for wireless real time systems},
  series = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  booktitle = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  isbn      = {978-3-945728-01-7},
  doi       = {10.1109/REM.2015.7380377},
  pages     = {88 -- 91},
  year      = {2015},
  language  = {en}
}
@book{Hallmann2015,
  author    = {Hallmann, Willi},
  title     = {(Meine) Erinnerungen an Jesco von Puttkamer : zusammengestellt anl{\"a}sslich des Todes von Jesco von Puttkamer am 27. Dezember 2012},
  publisher = {Pro BUSINESS digital printing Deutschlang GmbH},
  address   = {Berlin},
  isbn      = {978-3-86460-271-9 ; 3-86460-271-8},
  pages     = {178 Seiten},
  year      = {2015},
  language  = {de}
}
@book{IomdinaBauerKotliar2015,
  author    = {Iomdina, E. N. and Bauer, S. M. and Kotliar, Konstantin},
  title     = {БИОМЕХАНИКА ГЛАЗА: ТЕОРЕТИЧЕСКИЕ АСПЕКТЫ И КЛИНИЧЕСКИЕ ПРИЛОЖЕНИЯ},
  publisher = {Real Time},
  address   = {Moscow},
  isbn      = {978-5-903025-57-2},
  pages     = {208 Seiten},
  year      = {2015},
  language  = {ru}
}
@inproceedings{TaddeiLozanaMicheletal.2015,
  author    = {Taddei, Francesca and Lozana, Lara and Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction},
  series = {5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.},
  booktitle = {5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.},
  editor    = {Papadrakakis, Manolis and Papadrakakis, M. and Papadopoulos, V. and Plevris, V.},
  year      = {2015},
  language  = {en}
}
@article{ButenwegHeuerWenk2015,
  author    = {Butenweg, Christoph and Heuer, R. and Wenk, T.},
  title     = {Erdbebeningenieurwesen und Baudynamik},
  series = {Bauingenieur},
  volume    = {90},
  journal   = {Bauingenieur},
  number    = {10},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {00056650},
  pages     = {S1},
  year      = {2015},
  language  = {de}
}
@inproceedings{SchmittButenweg2015,
  author    = {Schmitt, T. and Butenweg, Christoph},
  title     = {Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme - Parameterstudie},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {199 -- 206},
  year      = {2015},
  language  = {de}
}
@inproceedings{KubalskiButenweg2015,
  author    = {Kubalski, T. and Butenweg, Christoph},
  title     = {Ausfachungsmauerwerk unter kombinierter seismischer Beanspruchung},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {117 -- 122},
  year      = {2015},
  language  = {de}
}
@incollection{BusseEschMuntaniol2015,
  author    = {Busse, Daniel and Esch, Thomas and Muntaniol, Roman},
  title     = {Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_18},
  pages     = {327 -- 343},
  year      = {2015},
  abstract  = {The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.},
  language  = {en}
}
@article{GrundmannDachwaldGrimmetal.2015,
  author    = {Grundmann, Jan Thimo and Dachwald, Bernd and Grimm, Christian D. and Kahle, Ralph and Koch, Aaron Dexter and Krause, Christian and Lange, Caroline and Quantius, Dominik and Ulamec, Stephan},
  title     = {Spacecraft for Hypervelocity Impact Research - An Overview of Capabilities, Constraints and the Challenges of Getting There},
  series = {Procedia Engineering},
  volume    = {Vol. 103},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.04.021},
  pages     = {151 -- 158},
  year      = {2015},
  language  = {en}
}
@inproceedings{GrundmannLangeDachwaldetal.2015,
  author    = {Grundmann, Jan Thimo and Lange, Caroline and Dachwald, Bernd and Grimm, Christian and Koch, Aaron and Ulamec, Stephan},
  title     = {Small Spacecraft in Planetary Defence Related Applications-Capabilities, Constraints, Challenges},
  series = {IEEE Aerospace Conference},
  booktitle = {IEEE Aerospace Conference},
  pages     = {1 -- 18},
  year      = {2015},
  abstract  = {In this paper we present an overview of the characteristics and peculiarities of small spacecraft missions related to planetary defence applications. We provide a brief overview of small spacecraft missions to small solar system bodies. On this background we present recent missions and selected projects and related studies at the German Aerospace Center, DLR, that contribute to planetary defence related activities. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander recently arrived on comet 67P/Churyumov-Gerasimenko aboard ESA's ROSETTA comet rendezvous mission, and the Mobile Asteroid Surface Scout, MASCOT, now underway to near-Earth asteroid (162173) 1999 JU3 aboard the Japanese sample-return probe HAYABUSA-2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact \& Deflection Assessment), a joint effort of ESA,JHU/APL, NASA, OCA and DLR, combining JHU/APL's DART (Double Asteroid Redirection Test) and ESA's AIM (Asteroid Impact Monitor) spacecraft in a mission towards near-Eath binary asteroid (65803) Didymos.},
  language  = {en}
}
@misc{HuschyarTippkoetterUlber2015,
  author    = {Huschyar, Al-Kaidy and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {System und Verfahren zur Durchf{\"u}hrung von chemischen, biologischen oder physikalischen Reaktionen},
  year      = {2015},
  language  = {de}
}
@article{FrotscherKochStaat2015,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Staat, Manfred},
  title     = {Computational investigation of drug action on human-induced stem cell derived cardiomyocytes},
  series = {Journal of biomechanical engineering},
  volume    = {Vol. 137},
  journal   = {Journal of biomechanical engineering},
  number    = {iss. 7},
  publisher = {ASME},
  address   = {New York},
  issn      = {1528-8951 (E-Journal); 0148-0731 (Print)},
  doi       = {10.1115/1.4030173},
  pages     = {071002-1 -- 071002-7},
  year      = {2015},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@article{ThielMufflerTippkoetteretal.2015,
  author    = {Thiel, Alexander and Muffler, Kai and Tippk{\"o}tter, Nils and Suck, Kirstin and Sohling, Ulrich and Hruschka, Steffen M. and Ulber, Roland},
  title     = {A novel integrated downstream processing approach to recover sinapic acid, phytic acid and proteins from rapeseed meal},
  series = {Journal of Chemical Technology and Biotechnology},
  volume    = {90},
  journal   = {Journal of Chemical Technology and Biotechnology},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/jctb.4664},
  pages     = {1999 -- 2006},
  year      = {2015},
  abstract  = {BACKGROUND Currently, several techniques exist for the downstream processing of protein, phytic acid and sinapic acid from rapeseed and rapeseed meal, but no technique has been developed to separate all of the components in one process. In this work, two new downstream processing strategies focusing on recovering sinapic acid, phytic acid and protein from rapeseed meal were established. RESULTS The sinapic acid content was enhanced by a factor of 4.5 with one method and 5.1 with the other. The isolation of sinapic acid was accomplished using a zeolite-based adsorbent with high adsorptive and optimal desorption characteristics. Phytic acid was isolated using the anion-exchange resin Purolite A200®. In addition, the processes resulted in two separated protein fractions. The ratios of globulin and albumin ratio to the total protein were 59.2\% and 40.1\%, respectively. The steps were then combined in two different ways: (a) a 'sequential process' using the zeolite and A200 in batch processes; and (b) a 'parallel process' using only A200 in a chromatographic system to separate all of the compounds. CONCLUSIONS It can be concluded that isolation of all three components was possible in both processes. These could enhance the added value of current processes using rapeseed meal as a protein source. © 2015 Society of Chemical Industry},
  language  = {en}
}