@misc{KremerBurdaPferd2006,
  author    = {Kremer, H.-Hugo and Burda, Arne and Pferd, Frederik G.},
  title     = {Mentoring-Modell Paderborn (MeMoPad). Handbuch f{\"u}r Mentoren},
  organization    = {Universit{\"a}t Paderborn},
  year      = {2006},
  abstract  = {Mit freundlicher Genehmigung der Autoren (Stand 02.2006) Inhaltsverzeichnis: 0 Vorwort 1 Warum brauchen wir MeMoPad? Begr{\"u}ndungslinien. 1.1 Was fordern Studierende? 1.2 Welche Vorteile ergeben sich f{\"u}r die Fakult{\"a}t? 1.3 Zusammenfassung 2 MeMoPad - Das Mentorenprogramm an der Universit{\"a}t Paderborn 2.1 Qualit{\"a}tsmerkmale eines Mentorenprogramms 2.2 Rolle und Aufgaben von Mentoren 2.3 Didaktische Implikationen 3 Das Rahmenkonzept - Betreuungsgebiete (BG) im {\"U}berblick 4 Organisatorisches 5 Die Umsetzung - Betreuungsgebiete im Detail 5.1 BG0: "Was bringt mir MeMoPad?" Materialien 5.2 BG1: "Leben an der Hochschule: Was bedeutet ‚studieren'?" 5.2.1 Didaktische Hinweise 5.2.2 M{\"o}glicher Ablauf Materialien 5.3 BG2: "Was bedeutet ‚lernen' in der Hochschule?" 5.3.1 Didaktische Hinweise 5.3.2 M{\"o}glicher Ablauf Materialien 5.4 BG3: "Warum und wie (ge)braucht man wissenschaftliche Standards?" 5.4.1 Didaktische Hinweise 5.4.2 M{\"o}glicher Ablauf Materialien 5.5 BG4: "Wie pr{\"a}sentiert man (sich) erfolgreich?" 5.5.1 Didaktische Hinweise 5.5.2 M{\"o}glicher Ablauf Materialien 5.6 BG5: "Wie kann ich mich pers{\"o}nlich weiterentwickeln?" 5.5.1 Didaktische Hinweise 5.5.2 M{\"o}glicher Ablauf Materialien},
  subject      = {Hochschuldidaktik},
  language  = {de}
}
@inproceedings{KraftRetkowitz2006,
  author    = {Kraft, Bodo and Retkowitz, Daniel},
  title     = {Graph Transformations for Dynamic Knowledge Processing},
  year      = {2006},
  abstract  = {In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. HICSS '06 http://dx.doi.org/10.1109/HICSS.2006.200 The conceptual design phase at the beginning of the building construction process is not adequately supported by any CAD-tool. Conceptual design support needs regarding two aspects: first, the architect must be able to develop conceptual sketches that provide abstraction from constructive details. Second, conceptually relevant knowledge should be available to check these conceptual sketches. The paper deals with knowledge to formalize for conceptual design. To enable domain experts formalizing knowledge, a graph-based specification is presented that allows the development of a domain ontology and design rules specific for one class of buildings at runtime. The provided tool support illustrates the introduced concepts and demonstrates the consistency analysis between knowledge and conceptual design.},
  subject      = {CAD},
  language  = {de}
}
@inproceedings{KraftRetkowitz2006,
  author    = {Kraft, Bodo and Retkowitz, Daniel},
  title     = {Rule-Dependencies for Visual Knowledge Specification in Conceptual Design},
  year      = {2006},
  abstract  = {In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.},
  subject      = {CAD},
  language  = {en}
}
@misc{Horsch2006,
  author    = {Horsch, Andreas},
  title     = {Die Masken des Harlekin : Formensprache im Charakterdesign},
  year      = {2006},
  abstract  = {Ziel und Inhalt dieser Arbeit ist das Design eines Harlekin-Charakters und die Darstellung seiner Ausdrucksskala. Der Schwerpunkt liegt dabei auf dem Studium der Gesichtsmuskeln, ihrer Formensprache und ihrer Relation zu den 6 Grundemotionen Traurigkeit, {\"A}rger, Angst, Freude, Ekel und {\"U}berraschung (nach dem Modell von Paul Ekman). Alle 6 Emotionen sind in verschiedenen Intensit{\"a}tsgraden und Variationen behandelt, wobei die Emotion der Freude aufgrund ihrer engen Bindung zum Harlekin-Charakter vergleichsweise umfassender bearbeitet wurde. Das Endergebnis stellt eine Bildreihe von ca. 50 Ausdr{\"u}cken und eine Abhandlung {\"u}ber Gesichtsmuskulatur und -ausdruck, dessen Relation zu den Emotionen und den Hintergrund des Harlekincharakters dar. Die Illustrationen wurden unter Verwendung der 3D-Technologie von Maya 7.0 und ZBrush 2.0 ausgef{\"u}hrt.},
  subject      = {Harlekin},
  language  = {de}
}
@inproceedings{PoghossianSchumacherKloocketal.2006,
  author    = {Poghossian, Arshak and Schumacher, Kerstin and Kloock, Joachim P. and Rosenkranz, Christian and Schultze, Joachim W. and M{\"u}ller-Veggian, Mattea and Sch{\"o}ning, Michael Josef},
  title     = {Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1259},
  year      = {2006},
  abstract  = {A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of "good" ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{WagnerSchoening2006,
  author    = {Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Preface of the Special Issue of I3S 2005 in J{\"u}lich (Germany)},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1365},
  year      = {2006},
  abstract  = {International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{Bornebusch2006,
  author    = {Bornebusch, Michael},
  title     = {Hydraulische und hydrologische Modellsimulation als Planungswerkzeug f{\"u}r Hochwasser-Schutz-Massnahmen},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 25-27. Zusammenfassung des Vortrags.},
  subject      = {Hochwasserschutz},
  language  = {de}
}
@inproceedings{Himmerich2006,
  author    = {Himmerich, J{\"o}rg},
  title     = {Pipeline Integrity Management System - Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 21-22. Zusammenfassung des Vortrags.},
  subject      = {Hochdruckleitung},
  language  = {de}
}
@inproceedings{FredebeulKrein2006,
  author    = {Fredebeul-Krein, Markus},
  title     = {Developing competitive broadband markets: Lessons learnt from German and European regulatory approaches on broad-band access},
  year      = {2006},
  abstract  = {A key feature of future broadband markets will be diversity of access technologies, meaning that numerous technologies will be exploited for broadband communication. Various factors will affect the success of these future broadband markets, the regulatory policy being one amongst others. So far, a coherent regulatory approach does not exist as to broadband markets. First results of policies so far suggest that less sector-specific regulation is likely to occur. Instead, regulators must ensure that access to networks and services of potentially dominant providers in a relevant broadband market will satisfy requirements for openness and non-discrimination. In this environment the future challenge of regulationg broadband markets will be to set the right incentives for investment into new infrastructures. This paper examines whether there is a need for the regulation of future broadband access markets an if yes, what is the appropriate regulatory tool to do so. Thereby the focus is on the analysis of European broadband markets and the regulatory approaches applied. The first section provides a description of the characteristics of future broadband markets. The second section discusses possible bottlenecks on broadband markets an their regulatory implications. The third section will examine regulatory issues concerning access to broadband networks in more detail. This will be done by comparing the regulatory approaches of European countries and the results in terms of bradband penetration. The final section will give key recommendations for a regulatory strategy on brandband access markets.},
  subject      = {Telekommunikationsmarkt},
  language  = {en}
}
@inproceedings{MertenConradKaemperetal.2006,
  author    = {Merten, Sabine and Conrad, Thorsten and K{\"a}mper, Klaus-Peter and Picard, Antoni and Sch{\"u}tze, Andreas},
  title     = {Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries},
  year      = {2006},
  abstract  = {Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R\&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.},
  subject      = {Virtuelles Laboratorium},
  language  = {en}
}
@misc{Staat2006,
  author    = {Staat, Manfred},
  title     = {Technische Mechanik. Vorlesungsmitschrift. Korrigierter Nachdr. der 3. Aufl.},
  year      = {2006},
  abstract  = {{\"U}berarbeitete, korrigierte und erg{\"a}nzte Version einer Vorlesungsmitschrift von Sebastian Kr{\"a}mer. 172 S. Inhaltsverzeichnis 0 Einf{\"u}hrung in die Mechanik 1 Statik starrer K{\"o}rper 2 Elastostatik (Festigkeitslehre) 3 Kinematik 4 Kinetik Literatur},
  subject      = {Technische Mechanik},
  language  = {de}
}
@misc{Staat2006,
  author    = {Staat, Manfred},
  title     = {Engineering Mechanics. Lecture Notes. 2nd edition, translation of the 3rd corrected and extended German edition of "Technische Mechanik"},
  year      = {2006},
  abstract  = {English translation of the corrected lectures notes of Sebastian Kr{\"a}mer. Contents 0 Introduction to Mechanics 1 Statics of Rigid Bodies 2 Elastostatics (Strength of Materials) 3 Kinematics 4 Kinetics Literature},
  subject      = {Technische Mechanik},
  language  = {en}
}
@misc{StaatBarry2006,
  author    = {Staat, Manfred and Barry, Steve},
  title     = {Continuum Mechanics with an Introduction to the Finite Element Method / Steve Barry; Manfred Staat. With extensions by Manfred Staat.},
  year      = {2006},
  abstract  = {Contents: 1 Introduction 2 One Dimensional Continuum Mechanics 3 Tensors 4 Three Dimensional Stress and Strain 5 Conservation Laws 6 Contiunuum Modelling 7 Plain Problems 8 Questions 9 Reference Information},
  subject      = {Technische Mechanik},
  language  = {en}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Manufacturing - eine interdisziplin{\"a}re Strategie},
  year      = {2006},
  abstract  = {Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realit{\"a}t geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie w{\"u}rde es m{\"o}glich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenst{\"a}tze und gen{\"u}gend Rohmaterial vor Ort auf einem Flugzeugtr{\"a}ger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realit{\"a}t bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verf{\"u}gbar, weil zu Ihrer Herstellung keine Werkzeuge ben{\"o}tigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, h{\"o}here Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gew{\"u}nschte Spezifikation erreicht? Was muss passieren, damit aus dem Ph{\"a}nomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen f{\"u}r jedermann erm{\"o}glichen und m{\"o}glicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing" n{\"a}her beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden m{\"u}ssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen f{\"u}r eine konstruktive Diskussion auf der RapidTech 2006.},
  subject      = {Rapid prototyping},
  language  = {de}
}
@misc{OPUS4-142,
  title     = {Fachblatt, Jahrgang 2006; Nr. 1},
  organization    = {FH Aachen, University of Applied Sciences},
  year      = {2006},
  abstract  = {Studienbeitr{\"a}ge Die schwere Geburt des Studienbeitragsgesetzes Forschung Erfindungen f{\"u}r die Praxis Antikensammlung inszeniert in geschwungener Ebenenkonstruktion Doppelt h{\"a}lt besser Studium und Lehre Kreative H{\"o}henfl{\"u}ge im Weinberg von Piemont Nach "Bauhaus Europa" jetzt "Kunsthaus Aachen" Beton - Es kommt drauf an, was man draus macht "Ein St{\"u}ck Raumfahrtsystem" Film ab im Cinekaree Umstellung auf Bachelor- und Master-Abschl{\"u}sse beispielhaft Herausragende architektonische Umsetzung geehrt Erdbeobachtung im Taschenformat Die Hygiene im Handgep{\"a}ck Eintauchen in die Welt von "sub-ten" Symposium zur 1. Flugmesswoche des FB 6 Personen Konsul mit Zeitungsente Der richtige Mann am richtigen Ort Urlaub f{\"u}rs Ehrenamt 101 und ziemlich weise Goldene Auszeichnung f{\"u}r die Dekanin Wir feiern heute unsere Eliten Eigene Faszination f{\"u}r den Lehrstoff fesselt Studierende Personalia Horst Rambau: Endstation Selbstst{\"a}ndigkeit? Der gute Ruf reicht bis Teheran Alumni "Regen ist gut f{\"u}r unser Gesch{\"a}ft" FH-Studenten aus J{\"u}lich in der Wissenschaft erfolgreich Miss und Mister FH 2005 International Vor 20 Jahren begann es! "Heute ist ein guter Tag f{\"u}r die Fachhochschule" Service Bologna ist l{\"a}ngst bei den Hochschulen angekommen Auch Lehrer lernen nie aus Was ist eigentlich das Freshman-Year "Zeile f{\"u}r Zeile"},
  subject      = {Aachen / Fachhochschule Aachen},
  language  = {de}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"},
  year      = {2006},
  abstract  = {Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering - Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision},
  subject      = {Rapid prototyping},
  language  = {en}
}
@misc{Junold2006,
  author    = {Junold, Thomas},
  title     = {Schwarz. Weiss. Ein dokumentierter Schriftentwurf},
  year      = {2006},
  abstract  = {Schwarz und Weiß. Schwarze Glyphen, weiße Gegenformen. Schwarze Zeilen, Weißraum als Gestaltungselement. Schwarze Schrift auf weißem Papier. Schrift als Kommunikationselement. Vereinheitlichte und vereinfachte Formen, dank Jahrhunderte langer Gew{\"o}hnung oder Experimentierfeld f{\"u}r Formen, die sich mit ver{\"a}ndernden Techniken gleichermaßen ver{\"a}ndern? Schrift als Vermittler von Emotionen oder reine Information. Was macht eine Schrift lesbar und was steht einer »Display-Schrift« gut zu Gesicht? Sind Schriftsippen mit {\"u}ber hundert Schnitten Anwenderfreundlich oder eher Grund f{\"u}r Verwirrung. Serifenschrift oder Sans-Serif? Was ist moderner? Sind wir Kinder der Helvetica oder der Frutiger oder eher Enkel der Garamond oder Bodoni? Kann man ein {\"a}sthetisches Empfinden f{\"u}r Schrift lernen? Eine Schrift als Beweis, ausgebaut f{\"u}r eine sinnvolle Verwendung, hinterfragt durch einen Markt schon w{\"a}hrend ihrer Entstehung. R{\"u}ckf{\"u}hrung und Begr{\"u}ndung der aufgef{\"u}hrten Fragen auf diese Schrift. Ein Diplom, das nachdenkt {\"u}ber Schrift, das Schrift anbietet, den Dialog mit Schrift fordert.},
  subject      = {Schriftkunst},
  language  = {de}
}
@inproceedings{SrivastavaSinghDhandetal.2006,
  author    = {Srivastava, Alok and Singh, Virendra and Dhand, Chetna and Kaur, Manindar and Singh, Tejvir and Witte, Katrin and Scherer, Ulrich W.},
  title     = {Study of swift heavy ion modified conduction polymer composites for application as gas sensor},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1345},
  year      = {2006},
  abstract  = {A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{ChaiybounTrauteKiesewetteretal.2006,
  author    = {Chaiyboun, Ali and Traute, R{\"u}diger and Kiesewetter, Olaf and Ahlers, Simon and M{\"u}ller, Gerhard and Doll, Theodor},
  title     = {Modular analytical multicomponent analysis in gas sensor arrays},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1358},
  year      = {2006},
  abstract  = {A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{SakthivelWeppner2006,
  author    = {Sakthivel, Mariappan and Weppner, Werner},
  title     = {Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1399},
  year      = {2006},
  abstract  = {A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10\% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{KoplinSiemonsOcenValentinetal.2006,
  author    = {Koplin, Tobias J. and Siemons, Maike and Oc{\´e}n-Val{\´e}ntin, C{\´e}sar and Sanders, Daniel and Simon, Ulrich},
  title     = {Workflow for high throughput screening of gas sensing materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1407},
  year      = {2006},
  abstract  = {The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{NaetherJuarezEmmerichetal.2006,
  author    = {N{\"a}ther, Niko and Ju{\´a}rez, Leon M. and Emmerich, R{\"u}diger and Berger, J{\"o}rg and Friedrich, Peter and Sch{\"o}ning, Michael Josef},
  title     = {Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1418},
  year      = {2006},
  abstract  = {An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{WagnerKohlFroebaetal.2006,
  author    = {Wagner, Thorsten and Kohl, Claus-Dieter and Fr{\"o}ba, Michael and Tiemann, Michael},
  title     = {Gas sensing properties of ordered mesoporous SnO2},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1422},
  year      = {2006},
  abstract  = {We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{MirmohseniRostamizadeh2006,
  author    = {Mirmohseni, Abdolreza and Rostamizadeh, Kobra},
  title     = {Quartz crystal nanobalance in conjunction with principal component analysis for identification of volatile organic compounds},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1434},
  year      = {2006},
  abstract  = {Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90\% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{KreutzLoergenGraeweetal.2006,
  author    = {Kreutz, Christian and L{\"o}rgen, J{\"u}rgen and Graewe, Boris and Bargon, Joachim and Yoshida, Mayumi and Freso, Zachary M. and Fr{\`e}chet, Jean M. J.},
  title     = {High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1445},
  year      = {2006},
  abstract  = {An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{RabnerShacham2006,
  author    = {Rabner, Arthur and Shacham, Yosi},
  title     = {A concept for a sensitive micro total analysis system for high throughput fluorescence imaging},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1456},
  year      = {2006},
  abstract  = {This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{FoersterStockMontanarietal.2006,
  author    = {F{\"o}rster, Arnold and Stock, J{\"u}rgen and Montanari, Simone and Lepsa, Mihail Ion and L{\"u}th, Hans},
  title     = {Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1462},
  year      = {2006},
  abstract  = {GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{PlatenPoghossianSchoening2006,
  author    = {Platen, Johannes and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Microstructured Nanostructures - nanostructuring by means of conventional photolithography and layer-expansion technique},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1477},
  year      = {2006},
  abstract  = {A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, "fluidic-channel"-, "cantilever"- and meander-type structures.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{PijanowskaRemiszewskaPederzollietal.2006,
  author    = {Pijanowska, Dorota G. and Remiszewska, Elzbieta and Pederzolli, Cecilia and Lunelli, Lorenzo and Vendano, Michele and Canteri, Roberto and Dudzinski, Konrad and Kruk, Jerzy and Torbicz, Wladyslaw},
  title     = {Surface modification for microreactor fabrication},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1480},
  year      = {2006},
  abstract  = {In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff's base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BukhariYang2006,
  author    = {Bukhari, Syed Faisal Ahmed and Yang, Wuqiang},
  title     = {Multi-interface level sensors and new development in monitoring and control of oil separators},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1498},
  year      = {2006},
  abstract  = {In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{TymeckiGlabKoncki2006,
  author    = {Tymecki, Lukasz and Glab, Stanislaw and Koncki, Robert},
  title     = {Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1506},
  year      = {2006},
  abstract  = {Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{SpannhakeSchulzHelwigetal.2006,
  author    = {Spannhake, Jan and Schulz, Olaf and Helwig, Andreas and Krenkow, Angelika and M{\"u}ller, Gerhard and Doll, Theodor},
  title     = {High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1513},
  year      = {2006},
  abstract  = {Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{KatzWillner2006,
  author    = {Katz, Eugenii and Willner, Itamar},
  title     = {Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1528},
  year      = {2006},
  abstract  = {Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{PijanowskaRemiszewska2006,
  author    = {Pijanowska, Dorota G. and Remiszewska, Elzbieta},
  title     = {pH-based detection of phenylalnine by potentiometric and colorimetric methods},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1536},
  year      = {2006},
  abstract  = {In this paper, methods of sample preparation for potentiometric measurement of phenylalanine are presented. Basing on the spectrophotometric measurements of phenylalanine, the concentrations of reagents of the enzymatic reaction (10 mM L-Phe, 0,4 mM NAD+, 2U L-PheDH) were determined. Then, the absorption spectrum of the reaction product, NADH, was monitored (maximum peak at 340 nm). The results obtained by the spectrophotometric method were compared with the results obtained by the colourimetry, using pH indicators. The above-mentioned two methods will be used as references for potentiometric measurements of phenylalanine concentration.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{AridaKloockSchoening2006,
  author    = {Arida, Hassan A. and Kloock, Joachim P. and Sch{\"o}ning, Michael Josef},
  title     = {Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1545},
  year      = {2006},
  abstract  = {A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BarekFischerNavratiletal.2006,
  author    = {Barek, Jiri and Fischer, Jan and Navratil, Tomas and Peckova, Karolina and Yosypchuk, Bogdan},
  title     = {Silver solid amalgam electrodes as sensors for chemical carcinogens},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1554},
  year      = {2006},
  abstract  = {The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BaronasIvanauskasKulys2006,
  author    = {Baronas, Romas and Ivanauskas, Feliksas and Kulys, Juozas},
  title     = {Mathematical modeling of biosensors based on an array of enzyme microreactors},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1569},
  year      = {2006},
  abstract  = {This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{Wessling2006,
  author    = {Weßling, Matthias},
  title     = {Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Lideran{\c{c}}a},
  year      = {2006},
  abstract  = {O Perfil Reiss apresenta no resultado uma vis{\~a}o da estrutura dos motivos e impulsos de uma pessoa. O ponto de sa{\´i}da para a an{\´a}lise do resultado {\´e} o conhecimento de que os motivos vitais (= valores e metas de sobreviv{\^e}ncia) formam a moldura, na qual as compet{\^e}ncias e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princ{\´i}pio, n{\~a}o existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma compara{\c{c}}{\~a}o entre o resultado do Perfil Reiss e o conte{\´u}do de uma atividade apresentada ou ambicionada d{\´a} informa{\c{c}}{\~a}o sobre at{\´e} que ponto a capacidade de rendimento de uma pessoa nessa posi{\c{c}}{\~a}o pode vir ou vir{\´a} a se desenvolver por um longo tempo.},
  subject      = {F{\"u}hrung},
  language  = {es}
}
@techreport{Wessling2006,
  type      = {Working Paper},
  author    = {Weßling, Matthias},
  title     = {O Perfil Reiss: Conceito scientifico e conclus{\~o}es da pesquisa, aplica{\c{c}}{\~o}es exemplaricas e conseq{\"u}{\^e}ncias pr{\´a}ticas},
  year      = {2006},
  abstract  = {Para Reiss, a avalia{\c{c}}{\~a}o de cada um dos 16 motivos vitais {\´e} a chave para n{\~a}o s{\´o} entender o comportamento humano, como tamb{\´e}m para poder prev{\^e}-lo. Tal previs{\~a}o {\´e} tamb{\´e}m a meta de cada ci{\^e}ncia. Quando se quer saber a rea{\c{c}}{\~a}o das pessoas, precisa-se primeiro descobrir, o que as pessoas realmente querem - e, ent{\~a}o prever, que elas satisfar{\~a}o esses desejos e necessidades em suas a{\c{c}}{\~o}es. As chances, que o Perfil Reiss oferece, resultam entre outras tamb{\´e}m, que aqui {\´e} poss{\´i}vel pela primeira vez uma individualiza{\c{c}}{\~a}o total. Cerca de 6 bilh{\~o}es de perfis individuais podem ser apresentados com o Perfil Reiss. Na combina{\c{c}}{\~a}o correta da forma{\c{c}}{\~a}o e utiliza{\c{c}}{\~a}o da tipologia de um lado e da individualidade da conclus{\~a}o de outro lado, est{\´a} a for{\c{c}}a positiva desse instrumento.},
  subject      = {Motivation},
  language  = {pt}
}
@inproceedings{LeiMulchandaniChenetal.2006,
  author    = {Lei, Yu and Mulchandani, Priti and Chen, Wilfred and Mulchandani, Ashok},
  title     = {Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1573},
  year      = {2006},
  abstract  = {This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{BuehrigPolaczekRoethBaumeisteretal.2006,
  author    = {B{\"u}hrig-Polaczek, Andreas and R{\"o}th, Thilo and Baumeister, E. and Nowack, N. and S{\"u}ßmann, Torsten},
  title     = {Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss},
  year      = {2006},
  abstract  = {Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen k{\"o}nnen heute wirtschaftlich abgebildet werden und eignen sich m{\"o}glicherweise auch zum Einsatz in Fahrzeugkarosserien},
  subject      = {Karosseriebau},
  language  = {de}
}
@misc{HoettgesCordesWirtzetal.2006,
  author    = {H{\"o}ttges, J{\"o}rg and Cordes, J{\"u}rgen and Wirtz, Dominika and Moers, Monika and Gehlen, Tanja and Aldenhoven, Frederick},
  title     = {E-Learning AutoCAD},
  year      = {2006},
  abstract  = {Schrittweise Einf{\"u}hrung in die Welt des AutoCAD. Nach jedem Abschnitt besteht die M{\"o}glichkeit, das neue Wissen direkt anzuwenden. Mit Wissenspr{\"u}fungen und {\"U}bungen nach jedem Kapitel. (Modul wird noch {\"u}berarbeitet) 1. Der Anfang mit AutoCAD 2. Grundlagen zur Anfertigung einer Zeichnung 3. Layer 4. Texte und Bemaßung 5. Weiterf{\"u}hrende Zeichenwerkzeuge 6. Layout und Plotten},
  subject      = {CAD},
  language  = {de}
}
@misc{HoettgesCordesWirtzetal.2006,
  author    = {H{\"o}ttges, J{\"o}rg and Cordes, J{\"u}rgen and Wirtz, Dominika and Moers, Monika and Gehlen, Tanja and Aldenhoven, Frederick},
  title     = {E-Learning Access},
  year      = {2006},
  abstract  = {Schrittweise Einf{\"u}hrung in Access. Nach jedem Abschnitt besteht die M{\"o}glichkeit, das neue Wissen direkt anzuwenden. Mit Wissenspr{\"u}fungen und {\"U}bungen nach jedem Kapitel. 1. Grundbegriffe aus der Datenbank 2. Eine Datenbank planen 3. Tabellen erstellen und bearbeiten 4. Abfragen erstellen und bearbeiten 5. Formulare - Tuning f{\"u}r die Daten 6. Berichte - echt einfach},
  subject      = {ACCESS 2003},
  language  = {de}
}
@inproceedings{Staat2006,
  author    = {Staat, Manfred},
  title     = {Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - {\"U}berarb. Ausg.},
  year      = {2006},
  abstract  = {In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.},
  subject      = {Bruchmechanik},
  language  = {en}
}
@inproceedings{Becker2006,
  author    = {Becker, Astrid},
  title     = {Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 18 {\"U}bersicht des Vortrags},
  subject      = {Anlagenwirtschaft},
  language  = {de}
}
@inproceedings{Wellmann2006,
  author    = {Wellmann, Judith},
  title     = {Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 7-12 Die Berufsperspektiven im konstruktiven Ingenieurbau werden trotz sinkendem Bedarf an Statikern positiv bewertet.},
  subject      = {Ingenieurbau},
  language  = {de}
}
@inproceedings{OPUS4-161,
  title     = {Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006},
  organization    = {Alfha.net / Sektion Bauingenieurwesen},
  year      = {2006},
  abstract  = {"Mit dem "1. Erfahrungsaustausch" im Fachbereich Bauingenieurwesen berichten Absolventen des Fachbereichs aus der Praxis. Mit diesem Treffen wird die wichtige Verbindung zwischen Hochschule, ihren Absolventen und der Berufspraxis zum besonderen Anliegen gemacht und besonders gest{\"a}rkt." Zitat Prof. Dr.- Ing. Hans Boegershausen, Dekan im Grußwort. Referenten und Themen: Wellmann, Judith: Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau Dirk Gobbele, Dirk: Planung der Umbaumaßnahme Hauptbahnhof Aachen Kretschmann, Lars: Planung und Bauleitung Buschtunnel Aachen Becker, Astrid: Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit Plenz, Michael: Baurevision und Unternehmensberatung, T{\"a}tigkeit als {\"o}ffentlich bestellter und vereidigter Sachverst{\"a}ndiger Kl{\"o}cker, Alexander: Das Leitungsbauunternehmen - Unternehmerische Strategie als Zukunftssicherung T{\"u}rk, Roman: Sanierung von Hausanschl{\"u}ssen Bornebusch, Michael: Hydraulische und Hydrologische Modellsimulationen als Planungswerkzeug f{\"u}r Hochwasser-Schutz-Maßnahmen Himmerich, J{\"o}rg : Pipeline Integrity Management System - Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen.},
  subject      = {Aachen / Fachhochschule Aachen / Fachbereich Bauingenieurwesen},
  language  = {de}
}
@inproceedings{Gobbele2006,
  author    = {Gobbel{\´e}, Dirk},
  title     = {Planung der Umbaumaßnahme Hauptbahnhof Aachen},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 13-15. Bericht {\"u}ber die infrastrukturellen Maßnahmen zum Umbau des Hauptbahnhofs Aachen.},
  subject      = {Bauplanung},
  language  = {de}
}
@inproceedings{Kretschmann2006,
  author    = {Kretschmann, Lars},
  title     = {Planung und Bauleitung Buschtunnel Aachen},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 16-17 Der Umbau des Aachener Buschtunnels im Rahmen des europ{\"a}ischen Hochgeschwindigkeitsschienennetzes wird im sogenannten "Neuen {\"O}sterreichischen Tunnelbauverfahren (NOeT)", also ein Ausbau in Kalotte, Strosse und Sohle durchgef{\"u}hrt.},
  subject      = {Bauplanung},
  language  = {de}
}