@article{KobFrauenrath2009,
  author    = {Kob, Malte and Frauenrath, Tobias},
  title     = {A system for parallel measurement of glottis opening and larynx position},
  series = {Biomedical Signal Processing and Control},
  volume    = {4},
  journal   = {Biomedical Signal Processing and Control},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1746-8108},
  doi       = {10.1016/j.bspc.2009.03.004},
  pages     = {221 -- 228},
  year      = {2009},
  abstract  = {The simultaneous assessment of glottal dynamics and larynx position can be beneficial for the diagnosis of disordered voice or speech production and swallowing. Up to now, methods either concentrate on assessment of the glottis opening using optical, acoustical or electrical (electroglottography, EGG) methods, or on visualisation of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques. The method presented here makes use of a time-multiplex measurement approach of space-resolved transfer impedances through the larynx. The fast sequence of measurements allows a quasi simultaneous assessment of both larynx position and EGG signal using up to 32 transmit-receive signal paths. The system assesses the dynamic opening status of the glottis as well as the vertical and back/forward motion of the larynx. Two electrode-arrays are used for the measurement of the electrical transfer impedance through the neck in different directions. From the acquired data the global and individual conductivity is calculated as well as a 2D point spatial representation of the minimum impedance. The position information is shown together with classical EGG signals allowing a synchronous visual assessment of glottal area and larynx position. A first application to singing voice analysis is presented that indicate a high potential of the method for use as a non-invasive tool in the diagnosis of voice, speech, and swallowing disorders.},
  language  = {en}
}
@article{MuesgenanntKoersMcNeilRadchenkoetal.2023,
  author    = {Mues genannt Koers, Lucas and McNeil, S. W. and Radchenko, V. and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Production of Co-58m in a siphon-style liquid target on a medical cyclotron},
  volume    = {195},
  number    = {Art. 110734},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2023.110734},
  year      = {2023},
  abstract  = {We present the production of 58mCo on a small, 13 MeV medical cyclotron utilizing a siphon style liquid target system. Different concentrated iron(III)-nitrate solutions of natural isotopic distribution were irradiated at varying initial pressures and subsequently separated by solid phase extraction chromatography. The radio cobalt (58m/gCo and 56Co) was successfully produced with saturation activities of (0.35 ± 0.03) MBq μA-1 for 58mCo with a separation recovery of (75 ± 2) \% of cobalt after one separation step utilizing LN-resin.},
  language  = {en}
}
@article{HafidiElHatkaSchmitzetal.2024,
  author    = {Hafidi, Youssef and El Hatka, Hicham and Schmitz, Dominik and Krauss, Manuel and Pettrak, J{\"u}rgen and Biel, Markus and Ittobane, Najim},
  title     = {Sustainable soil additives for water and micronutrient supply: swelling and chelating properties of polyaspartic acid hydrogels utilizing newly developed crosslinkers},
  series = {Gels},
  volume    = {10},
  journal   = {Gels},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2310-2861},
  doi       = {10.3390/gels10030170},
  pages     = {Artikel 170},
  year      = {2024},
  abstract  = {Drought and water shortage are serious problems in many arid and semi-arid regions. This problem is getting worse and even continues in temperate climatic regions due to climate change. To address this problem, the use of biodegradable hydrogels is increasingly important for the application as water-retaining additives in soil. Furthermore, efficient (micro-)nutrient supply can be provided by the use of tailored hydrogels. Biodegradable polyaspartic acid (PASP) hydrogels with different available (1,6-hexamethylene diamine (HMD) and L-lysine (LYS)) and newly developed crosslinkers based on diesters of glycine (GLY) and (di-)ethylene glycol (DEG and EG, respectively) were synthesized and characterized using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) and regarding their swelling properties (kinetic, absorbency under load (AUL)) as well as biodegradability of PASP hydrogel. Copper (II) and zinc (II), respectively, were loaded as micronutrients in two different approaches: in situ with crosslinking and subsequent loading of prepared hydrogels. The results showed successful syntheses of di-glycine-ester-based crosslinkers. Hydrogels with good water-absorbing properties were formed. Moreover, the developed crosslinking agents in combination with the specific reaction conditions resulted in higher water absorbency with increased crosslinker content used in synthesis (10\% vs. 20\%). The prepared hydrogels are candidates for water-storing soil additives due to the biodegradability of PASP, which is shown in an exemple. The incorporation of Cu(II) and Zn(II) ions can provide these micronutrients for plant growth.},
  language  = {en}
}
@article{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {12},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {49 -- 54},
  year      = {1989},
  language  = {de}
}
@article{BaringhausGaigall2019,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an asymptotic relative efficiency concept based on expected volumes of confidence regions},
  series = {Statistics - A Journal of Theoretical and Applied Statistic},
  volume    = {53},
  journal   = {Statistics - A Journal of Theoretical and Applied Statistic},
  number    = {6},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4910},
  doi       = {10.1080/02331888.2019.1683560},
  pages     = {1396 -- 1436},
  year      = {2019},
  abstract  = {The paper deals with an asymptotic relative efficiency concept for confidence regions of multidimensional parameters that is based on the expected volumes of the confidence regions. Under standard conditions the asymptotic relative efficiencies of confidence regions are seen to be certain powers of the ratio of the limits of the expected volumes. These limits are explicitly derived for confidence regions associated with certain plugin estimators, likelihood ratio tests and Wald tests. Under regularity conditions, the asymptotic relative efficiency of each of these procedures with respect to each one of its competitors is equal to 1. The results are applied to multivariate normal distributions and multinomial distributions in a fairly general setting.},
  language  = {en}
}
@article{BaringhausGaigall2015,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an independence test approach to the goodness-of-fit problem},
  series = {Journal of Multivariate Analysis},
  volume    = {2015},
  journal   = {Journal of Multivariate Analysis},
  number    = {140},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2015.05.013},
  pages     = {193 -- 208},
  year      = {2015},
  abstract  = {Let X₁,…,Xₙ be independent and identically distributed random variables with distribution F. Assuming that there are measurable functions f:R²→R and g:R²→R characterizing a family F of distributions on the Borel sets of R in the way that the random variables f(X₁,X₂),g(X₁,X₂) are independent, if and only if F∈F, we propose to treat the testing problem H:F∈F,K:F∉F by applying a consistent nonparametric independence test to the bivariate sample variables (f(Xᵢ,Xⱼ),g(Xᵢ,Xⱼ)),1⩽i,j⩽n,i≠j. A parametric bootstrap procedure needed to get critical values is shown to work. The consistency of the test is discussed. The power performance of the procedure is compared with that of the classical tests of Kolmogorov-Smirnov and Cram{\´e}r-von Mises in the special cases where F is the family of gamma distributions or the family of inverse Gaussian distributions.},
  language  = {en}
}
@article{KlingeOttoMuehl2015,
  author    = {Klinge, Uwe and Otto, Jens and M{\"u}hl, Thomas},
  title     = {High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain},
  series = {BioMed Research International},
  volume    = {2015},
  journal   = {BioMed Research International},
  issn      = {2314-6133 (Print)},
  doi       = {10.1155/2015/953209},
  pages     = {7 pages},
  year      = {2015},
  language  = {en}
}
@article{FrauenrathNiendorfKob2008,
  author    = {Frauenrath, Tobias and Niendorf, Thoralf and Kob, Malte},
  title     = {Acoustic method for synchronization of Magnetic Resonance Imaging (MRI)},
  series = {Acta Acustica},
  volume    = {94},
  journal   = {Acta Acustica},
  number    = {1},
  publisher = {Hirzel},
  address   = {Stuttgart},
  issn      = {1861-9959},
  doi       = {10.3813/AAA.918017},
  pages     = {148 -- 155},
  year      = {2008},
  abstract  = {Magnetic Resonance Imaging (MRI) of moving organs requires synchronization with physiological motion or flow, which dictate the viable window for data acquisition. To meet this challenge, this study proposes an acoustic gating device (ACG) that employs acquisition and processing of acoustic signals for synchronization while providing MRI compatibility, immunity to interferences with electro-magnetic and acoustic fields and suitability for MRI at high magnetic field strengths. The applicability and robustness of the acoustic gating approach is examined in a pilot study, where it substitutes conventional ECG-gating for cardiovascular MR. The merits and limitations of the ACG approach are discussed. Implications for MR imaging in the presence of physiological motion are considered including synchronization with other structure- or motion borne sounds.},
  language  = {en}
}
@article{BerndtZahn1975,
  author    = {Berndt, Heinz and Zahn, Helmut},
  title     = {Peptide, 99 : Monomere cyclische Cystinpeptidderivate, III ; Synthese der Schafinsulin-A-Kettensequenzen A2-21 und A1-21 als monomere cyclische Dicystinpeptidderivate},
  series = {Justus Liebigs Annalen der Chemie},
  volume    = {1975},
  journal   = {Justus Liebigs Annalen der Chemie},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0690},
  doi       = {10.1002/jlac.197519750908},
  pages     = {1601 -- 1612},
  year      = {1975},
  abstract  = {Die Synthese der Sequenzen A2—21 (13) und A1—21 (15) der Schafinsulin-A-Kette als monomere cyclische Dicystinpeptidderivate wird beschrieben. Die intrachenaren Cystinbr{\"u}cken A6—7 und A 11 —20 vermitteln die L{\"o}slichkeit dieser Derivate in Dimethylformamid und erm{\"o}glichen erstmalig die Reindarstellung vollgesch{\"u}tzter Insulin-A-Kettenderivate. Die w{\"a}hrend der Synthese eingesetzten Schutzgruppen lassen sich mittels Trifluoressigs{\"a}ure und 2-Mercapto{\"a}thanol quantitativ entfernen.},
  language  = {de}
}
@article{Timme2022,
  author    = {Timme, Michael},
  title     = {Beweislast beim gutgl{\"a}ubigen Erwerb eines Kraftfahrzeugs ohne Erhalt der Zulassungsbescheinigung Teil II — Zugleich eine Besprechung von BGH, Urt. v. 23.9.2022 - V ZR 148/21, MDR 2022, 1542},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {77},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {1},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {doi.org/10.9785/mdtr-2023-770102},
  pages     = {r5 -- r7},
  year      = {2022},
  abstract  = {Im Handel mit Kraftfahrzeugen geh{\"o}ren Aspekte des gutgl{\"a}ubigen Erwerbs zu den beinahe allt{\"a}glichen Standardproblemen. Der BGH f{\"u}gt in seiner Entscheidung v. 23.9.2022-VZR148/21, MDR 2022, 1541 diesem im Detail breit gef{\"a}cherten Themenfeld einen weiteren Mosaikstein hinzu: Der Erwerber erhielt das verkaufte Kfz ohne {\"U}bergabe einer Zulassungsbescheinigung Teil II, behauptet aber, diese Bescheinigung sei dem vom ihm eingeschalteten Vermittler bei Erwerb (als F{\"a}lschung) vorgelegt worden. Tats{\"a}chlich befand sich das Original durchg{\"a}ngig beim wahren Eigent{\"u}mer, der nunmehr Herausgabe des Fahrzeugs verlangt. Der BGH sch{\"u}tzt in dieser Gestaltung im Ergebnis den Erwerber. Die Entscheidung ist in mehrfacher Hinsicht bemerkenswert.},
  language  = {de}
}
@article{BiewendtBlaschkeBoehnert2020,
  author    = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno},
  title     = {The rebound effect - a systematic review of the current state of affairs},
  series = {European Journal of Economics and Business Studies},
  volume    = {6},
  journal   = {European Journal of Economics and Business Studies},
  number    = {1},
  publisher = {Revistia},
  address   = {London},
  issn      = {2601-8659},
  doi       = {10.26417/134nvy47z},
  pages     = {106 -- 120},
  year      = {2020},
  abstract  = {This publication is intended to present the current state of research on the rebound effect. First, a systematic literature review is carried out to outline (current) scientific models and theories. Research Question 1 follows with a mathematical introduction of the rebound effect, which shows the interdependence of consumer behaviour, technological progress, and interwoven effects for both. Thereupon, the research field is analysed for gaps and limitations by a systematic literature review. To ensure quantitative and qualitative results, a review protocol is used that integrates two different stages and covers all relevant publications released between 2000 and 2019. Accordingly, 392 publications were identified that deal with the rebound effect. These papers were reviewed to obtain relevant information on the two research questions. The literature review shows that research on the rebound effect is not yet comprehensive and focuses mainly on the effect itself rather than solutions to avoid it. Research Question 2 finds that the main gap, and thus the limitations, is that not much research has been published on the actual avoidance of the rebound effect yet. This is a major limitation for practical application by decision-makers and politicians. Therefore, a theoretical analysis was carried out to identify potential theories and ideas to avoid the rebound effect. The most obvious idea to solve this problem is the theory of a Steady-State Economy (SSE), which has been described and reviewed.},
  language  = {en}
}
@article{Golland2024,
  author    = {Golland, Alexander},
  title     = {Datenschutz beim Einsatz k{\"u}nstlicher Intelligenz im Unternehmen},
  series = {NWB},
  journal   = {NWB},
  number    = {6},
  publisher = {NWB},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {425 -- 432},
  year      = {2024},
  abstract  = {Seit Ende 2022 pr{\"a}gt das Schlagwort „K{\"u}nstliche Intelligenz" (KI) nicht nur den rechtswissenschaftlichen Diskurs. Die allgemeine Verf{\"u}gbarkeit von generativen KI-Modellen, allen voran die großen Sprachmodelle (Large Language Models, kurz: LLM) wie ChatGPT von OpenAI oder Bing AI von Microsoft, erfreuen sich gr{\"o}ßter Beliebtheit: LLM sind in der Lage, auf Grundlage statistischer Methoden - eine entsprechende Schnittstelle (Interface) vorausgesetzt - auch technisch wenig versierten Nutzern verst{\"a}ndliche Antworten auf ihre Fragen zu liefern. Dabei werden nicht nur umfassend Nutzerdaten verarbeitet, sondern auch auf weitere personenbezogene Daten zugegriffen sowie neue Daten erzeugt. Der Beitrag geht der Frage nach, welche spezifischen datenschutzrechtlichen Herausforderungen sich f{\"u}r Unternehmen beim Einsatz solcher LLM stellen.},
  language  = {de}
}
@article{ClaerFerreinSchiffer2019,
  author    = {Claer, Mario and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Calibration of a Rotating or Revolving Platform with a LiDAR Sensor},
  series = {Applied Sciences},
  volume    = {Volume 9},
  journal   = {Applied Sciences},
  number    = {issue 11, 2238},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app9112238},
  pages     = {18 Seiten},
  year      = {2019},
  language  = {en}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{BiewendtBlaschkeBoehnert2020,
  author    = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno},
  title     = {An evaluation of corporate sustainability in context of the Jevons paradox},
  series = {SocioEconomic Challenges},
  volume    = {4},
  journal   = {SocioEconomic Challenges},
  number    = {3},
  publisher = {ARMG Publishing},
  address   = {Sumy},
  issn      = {2520-6214},
  doi       = {10.21272/sec.4(3).46-65.2020},
  pages     = {46 -- 65},
  year      = {2020},
  abstract  = {The successful implementation and continuous development of sustainable corporate-level solutions is a challenge. These are endeavours in which social, environmental, and financial aspects must be weighed against each other. They can prove difficult to handle and, in some cases, almost unrealistic. Concepts such as green controlling, IT, and manufacturing look promising and are constantly evolving. This paper aims to achieve a better understanding of the field of corporate sustainability (CS). It will evaluate the hypothesis by which Corporate Sustainability thrives, via being efficient, increasing the performance, and raising the value of the input of the enterprises to the resources used. In fact, Corporate Sustainability on the surface could seem to contradict the idea, which supports the understanding that it encourages the reduction of the heavy reliance on the use of natural resources, the overall environmental impact, and above all, their protection. To understand how the contradictory notion of CS came about, in this part of the paper, the emphasis is placed on providing useful insight to this regard. The first part of this paper summarizes various definitions, organizational theories, and measures used for CS and its derivatives like green controlling, IT, and manufacturing. Second, a case study is given that combines the aforementioned sustainability models. In addition to evaluating the hypothesis, the overarching objective of this paper is to demonstrate the use of green controlling, IT, and manufacturing in the corporate sector. Furthermore, this paper outlines the current challenges and possible directions for CS in the future.},
  language  = {en}
}
@article{EngelmannSimsekShalabyetal.2024,
  author    = {Engelmann, Ulrich M. and Simsek, Beril and Shalaby, Ahmed and Krause, Hans-Joachim},
  title     = {Key contributors to signal generation in frequency mixing magnetic detection (FMMD): an in silico study},
  series = {Sensors},
  volume    = {24},
  journal   = {Sensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s24061945},
  pages     = {Artikel 1945},
  year      = {2024},
  abstract  = {Frequency mixing magnetic detection (FMMD) is a sensitive and selective technique to detect magnetic nanoparticles (MNPs) serving as probes for binding biological targets. Its principle relies on the nonlinear magnetic relaxation dynamics of a particle ensemble interacting with a dual frequency external magnetic field. In order to increase its sensitivity, lower its limit of detection and overall improve its applicability in biosensing, matching combinations of external field parameters and internal particle properties are being sought to advance FMMD. In this study, we systematically probe the aforementioned interaction with coupled N{\´e}el-Brownian dynamic relaxation simulations to examine how key MNP properties as well as applied field parameters affect the frequency mixing signal generation. It is found that the core size of MNPs dominates their nonlinear magnetic response, with the strongest contributions from the largest particles. The drive field amplitude dominates the shape of the field-dependent response, whereas effective anisotropy and hydrodynamic size of the particles only weakly influence the signal generation in FMMD. For tailoring the MNP properties and parameters of the setup towards optimal FMMD signal generation, our findings suggest choosing large particles of core sizes dc > 25 nm nm with narrow size distributions (σ < 0.1) to minimize the required drive field amplitude. This allows potential improvements of FMMD as a stand-alone application, as well as advances in magnetic particle imaging, hyperthermia and magnetic immunoassays.},
  language  = {en}
}
@article{HorbachStaat2018,
  author    = {Horbach, Andreas and Staat, Manfred},
  title     = {Optical strain measurement for the modeling of surgical meshes and their porosity},
  series = {Current Directions in Biomedical Engineering},
  volume    = {Band 4},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2364-5504},
  doi       = {10.1515/cdbme-2018-0045},
  pages     = {181 -- 184},
  year      = {2018},
  abstract  = {The porosity of surgical meshes makes them flexible for large elastic deformation and establishes the healing conditions of good tissue in growth. The biomechanic modeling of orthotropic and compressible materials requires new materials models and simulstaneoaus fit of deformation in the load direction as well as trannsversely to to load. This nonlinear modeling can be achieved by an optical deformation measurement. At the same time the full field deformation measurement allows the dermination of the change of porosity with deformation. Also the socalled effective porosity, which has been defined to asses the tisssue interatcion with the mesh implants, can be determined from the global deformation of the surgical meshes.},
  language  = {en}
}
@article{BaringhausGaigall2017,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {Hotelling's T² tests in paired and independent survey samples: An efficiency comparison},
  series = {Journal of Multivariate Analysis},
  volume    = {2017},
  journal   = {Journal of Multivariate Analysis},
  number    = {154},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2016.11.004},
  pages     = {177 -- 198},
  year      = {2017},
  abstract  = {Hotelling's T² tests in paired and independent survey samples are compared using the traditional asymptotic efficiency concepts of Hodges-Lehmann, Bahadur and Pitman, as well as through criteria based on the volumes of corresponding confidence regions. Conditions characterizing the superiority of a procedure are given in terms of population canonical correlation type coefficients. Statistical tests for checking these conditions are developed. Test statistics based on the eigenvalues of a symmetrized sample cross-covariance matrix are suggested, as well as test statistics based on sample canonical correlation type coefficients.},
  language  = {en}
}
@article{MeyerHaenelBeehetal.2020,
  author    = {Meyer, S. and H{\"a}nel, Matthias and Beeh, B. and Dittmann-Gabriel, S{\"o}ren and Dluhosch, R. and May, Martin and Herrmann, Ulf},
  title     = {Multifunktionaler thermischer Stromspeicher f{\"u}r die Strom- und W{\"a}rmeversorgung der Industrie von morgen},
  series = {ETG Journal / Energietechnische Gesellschaft im VDE (ETG)},
  volume    = {2020},
  journal   = {ETG Journal / Energietechnische Gesellschaft im VDE (ETG)},
  number    = {1},
  issn      = {2625-9907},
  pages     = {6 -- 9},
  year      = {2020},
  language  = {de}
}
@article{BerndtGattnerZahn1975,
  author    = {Berndt, Heinz and Gattner, Hans-Gregor and Zahn, Helmut},
  title     = {Semisynthetisches Des-A1-glycin-Schafinsulin},
  series = {Biological Chemistry},
  volume    = {356},
  journal   = {Biological Chemistry},
  number    = {2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {1437-4315},
  doi       = {10.1515/bchm2.1975.356.2.1455},
  pages     = {1469 -- 1472},
  year      = {1975},
  language  = {de}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{HerrmannKearney2002,
  author    = {Herrmann, Ulf and Kearney, David W.},
  title     = {Survey of Thermal Energy Storage for Parabolic Trough Power Plants},
  series = {Journal of Solar Energy Engineering},
  volume    = {124},
  journal   = {Journal of Solar Energy Engineering},
  number    = {2},
  issn      = {1528-8986 (Online)},
  doi       = {10.1115/1.1467601},
  pages     = {145 -- 152},
  year      = {2002},
  language  = {en}
}
@article{LevesqueSiegwolfEilmannetal.2014,
  author    = {L{\´e}vesque, Mathieu and Siegwolf, Rolf and Eilmann, Britta and Saurer, Matthias and Rigling, Andreas},
  title     = {Increased water-use efficiency does not lead to enhanced tree growth under xeric and mesic conditions},
  series = {New Phytologist},
  volume    = {203},
  journal   = {New Phytologist},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1469-8137 (Online)},
  doi       = {10.1111/nph.12772},
  pages     = {94 -- 109},
  year      = {2014},
  language  = {en}
}
@article{KearneyKellyHerrmannetal.2002,
  author    = {Kearney, David W. and Kelly, Bruce and Herrmann, Ulf and Cable, R. and Pacheco, J. and Mahoney, R. and Price, Henry and Blake, D. and Nava, P. and Potrovitza, N.},
  title     = {Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00191-9},
  pages     = {861 -- 870},
  year      = {2002},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {89},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {2},
  issn      = {0940-483X},
  pages     = {130 -- 134},
  year      = {1985},
  language  = {en}
}
@article{HafnerDemetzWeickertetal.2014,
  author    = {Hafner, David and Demetz, Oliver and Weickert, Joachim and Reißel, Martin},
  title     = {Mathematical Foundations and Generalisations of the Census Transform for Robust Optic Flow Computation},
  series = {Journal of Mathematical Imaging and Vision},
  journal   = {Journal of Mathematical Imaging and Vision},
  publisher = {Springer},
  address   = {New York},
  issn      = {1573-7683 (Online)},
  doi       = {10.1007/s10851-014-0529-9},
  year      = {2014},
  language  = {en}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{GielenWolfBerndtetal.1979,
  author    = {Gielen, Hans-G{\"u}nther and Wolf, G{\"u}nter and Berndt, Heinz and Zahn, Helmut},
  title     = {Synthese der Fragmente A1-8, A9-15 und A16-21 der Schafinsulin-A-Kette unter Verwendung des S-tert-Butylmercaptorestes als Thiolschutzgruppe},
  series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  volume    = {360},
  journal   = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  number    = {2},
  issn      = {1437-4315},
  doi       = {10.1515/bchm2.1979.360.2.1535},
  pages     = {1535 -- 1548},
  year      = {1979},
  language  = {de}
}
@article{WolfBerndtBrandenburg1979,
  author    = {Wolf, Wilhelm and Berndt, Heinz and Brandenburg, Dietrich},
  title     = {Synthese von Fragmenten einer [LysA13] Rinder-Insulin-A-Kette unter Verwendung des S-tert-Butylmercaptorestes als Thiolschutz},
  series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  volume    = {360},
  journal   = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  number    = {2},
  issn      = {1437-4315},
  doi       = {10.1515/bchm2.1979.360.2.1549},
  pages     = {1549 -- 1558},
  year      = {1979},
  language  = {de}
}
@article{WilhelmBerndtBrandenburg1979,
  author    = {Wilhelm, Wolff and Berndt, Heinz and Brandenburg, Dietrich},
  title     = {Zur Synthese der H{\"u}hnerinsulin-A-Kette, I : Darstellung der Fragmente A1-8, A9-15, A1-7 und A8-15},
  series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  volume    = {360},
  journal   = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  number    = {2},
  issn      = {1437-4315},
  doi       = {10.1515/bchm2.1979.360.2.1559},
  pages     = {1559 -- 1568},
  year      = {1979},
  language  = {de}
}
@article{Berndt1979,
  author    = {Berndt, Heinz},
  title     = {Synthese der Sequenz 71—86 des Humanproinsulins, III : Synthese {\"u}ber die Fragmente 71—78 und 79—86},
  series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  volume    = {360},
  journal   = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie},
  number    = {1},
  issn      = {1437-4315},
  doi       = {10.1515/bchm2.1979.360.1.765},
  pages     = {765 -- 772},
  year      = {1979},
  language  = {de}
}
@article{DammSauerbornFendetal.2017,
  author    = {Damm, Marc Andr{\´e} and Sauerborn, Markus and Fend, Thomas and Herrmann, Ulf},
  title     = {Optimisation of a urea selective catalytic reduction system with a coated ceramic mixing element},
  series = {Journal of ceramic science and technology},
  volume    = {8},
  journal   = {Journal of ceramic science and technology},
  number    = {1},
  publisher = {G{\"o}ller},
  address   = {Baden-Baden},
  isbn      = {2190-9385 (Print)},
  issn      = {2190-9385 (Online)},
  doi       = {10.4416/JCST2016-00056},
  pages     = {19 -- 24},
  year      = {2017},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@article{VerbanellaFabo2012,
  author    = {Verbanella, Stresa and Fabo, Sabine},
  title     = {Mit Pinsel und Farbe hacken : Interview mit Sabine Fabo},
  series = {Remotewords.net},
  journal   = {Remotewords.net},
  year      = {2012},
  abstract  = {Remotewords makes its mark on the picturesque "Bar Verbanella", located in Stresa near Isola Bella on Lago Maggiore. The words CUM GRANO SALIS (with a grain of salt) by Sabine Fabo, art theorist on media contexts, were applied to its roof in collaboration with the German-Italian art organization "Lo spirito del Lago".},
  language  = {de}
}
@article{RegerKuhnhenneHachuletal.2019,
  author    = {Reger, Vitali and Kuhnhenne, Markus and Hachul, Helmut and D{\"o}ring, Bernd and Blanke, Tobias and G{\"o}ttsche, Joachim},
  title     = {Plusenergiegeb{\"a}ude 2.0 in Stahlleichtbauweise},
  series = {Stahlbau},
  volume    = {88},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-journal), 0038-9145 (print)},
  doi       = {10.1002/stab.201900034},
  pages     = {522 -- 528},
  year      = {2019},
  language  = {de}
}
@article{AbdelLatifPeekenBenner1985,
  author    = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim},
  title     = {Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)},
  series = {Journal of tribology},
  volume    = {107},
  journal   = {Journal of tribology},
  number    = {4},
  isbn      = {0742-4787},
  issn      = {1528-8897},
  pages     = {527 -- 537},
  year      = {1985},
  language  = {en}
}
@article{AnikKapoorFrohberg1983,
  author    = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {1},
  issn      = {0044-3093},
  pages     = {53 -- 58},
  year      = {1983},
  language  = {en}
}
@article{OehlenschlaegerVolkmarStiefelmaieretal.2024,
  author    = {Oehlenschl{\"a}ger, Katharina and Volkmar, Marianne and Stiefelmaier, Judith and Langsdorf, Alexander and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {New insights into the influence of pre-culture on robust solvent production of C. acetobutylicum},
  series = {Applied Microbiology and Biotechnology},
  volume    = {108},
  journal   = {Applied Microbiology and Biotechnology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12981-8},
  pages     = {10 Seiten},
  year      = {2024},
  abstract  = {Clostridia are known for their solvent production, especially the production of butanol. Concerning the projected depletion of fossil fuels, this is of great interest. The cultivation of clostridia is known to be challenging, and it is difficult to achieve reproducible results and robust processes. However, existing publications usually concentrate on the cultivation conditions of the main culture. In this paper, the influence of cryo-conservation and pre-culture on growth and solvent production in the resulting main cultivation are examined. A protocol was developed that leads to reproducible cultivations of Clostridium acetobutylicum. Detailed investigation of the cell conservation in cryo-cultures ensured reliable cell growth in the pre-culture. Moreover, a reason for the acid crash in the main culture was found, based on the cultivation conditions of the pre-culture. The critical parameter to avoid the acid crash and accomplish the shift to the solventogenesis of clostridia is the metabolic phase in which the cells of the pre-culture were at the time of inoculation of the main culture; this depends on the cultivation time of the pre-culture. Using cells from the exponential growth phase to inoculate the main culture leads to an acid crash. To achieve the solventogenic phase with butanol production, the inoculum should consist of older cells which are in the stationary growth phase. Considering these parameters, which affect the entire cultivation process, reproducible results and reliable solvent production are ensured.},
  language  = {en}
}
@article{KruegerGroetzingerBerndt1987,
  author    = {Kr{\"u}ger, G{\"o}tz and Gr{\"o}tzinger, Joachim and Berndt, Heinz},
  title     = {Enantiomeric resolution of amino acid derivatives on chiral stationary phases by high-performance liquid chromatography},
  series = {Journal of Chromatography A},
  volume    = {1987},
  journal   = {Journal of Chromatography A},
  number    = {397},
  issn      = {0021-9673},
  doi       = {10.1016/S0021-9673(01)85005-6},
  pages     = {223 -- 232},
  year      = {1987},
  language  = {en}
}
@article{FontiEilmannGarciaGonzalezetal.2009,
  author    = {Fonti, Patrick and Eilmann, Britta and Garc{\´i}a-Gonz{\´a}lez, Ignacio and von Arx, Georg},
  title     = {Expeditious building of ring-porous earlywood vessel chronologies without loosing signal information},
  series = {Trees : structure and function},
  volume    = {23},
  journal   = {Trees : structure and function},
  number    = {3},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0931-1890 (Print)},
  doi       = {10.1007/s00468-008-0310-z},
  pages     = {665 -- 671},
  year      = {2009},
  language  = {en}
}
@article{HerrmannLippke1999,
  author    = {Herrmann, Ulf and Lippke, F.},
  title     = {The influence of transients on the design of DSG solar fields},
  series = {Journal de Physique IV : proceedings},
  volume    = {9},
  journal   = {Journal de Physique IV : proceedings},
  number    = {PR3},
  isbn      = {2-86883-402-7},
  issn      = {1764-7177 (Online)},
  doi       = {10.1051/jp4:1999377},
  pages     = {489 -- 494},
  year      = {1999},
  language  = {en}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{Fabo2007,
  author    = {Fabo, Sabine},
  title     = {Mouse on Mars : Wir suchen den Sound, den es noch nicht gibt},
  series = {Kunstforum international},
  volume    = {2007},
  journal   = {Kunstforum international},
  number    = {185},
  issn      = {0177-3674},
  pages     = {220},
  year      = {2007},
  language  = {de}
}
@article{EilmannZweifelBuchmannetal.2011,
  author    = {Eilmann, Britta and Zweifel, Roman and Buchmann, Nina and Graf Pannatier, Elisabeth and Rigling, Andreas},
  title     = {Drought alters timing, quantity, and quality of wood formation in Scots pine},
  series = {Journal of Experimental Botany},
  volume    = {62},
  journal   = {Journal of Experimental Botany},
  number    = {8},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1460-2431 (Online)},
  doi       = {10.1093/jxb/erq443},
  pages     = {2763 -- 2771},
  year      = {2011},
  language  = {en}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@article{AnikDagsoez1971,
  author    = {Anik, Sabri and Dagsoez, A. K.},
  title     = {Feinbleche schweißen : die Temperaturverteilung in d{\"u}nnen Stahlblechplatten beim Lichtbogenschweißen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {63},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {9},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {57 -- 59},
  year      = {1971},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Prediction of thermodynamic properties of oxygen in binary metallic solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {6},
  issn      = {0044-3093},
  pages     = {372 -- 375},
  year      = {1983},
  language  = {en}
}