@article{GraesslRenzHezeletal.2013,
  author    = {Gr{\"a}ßl, Andreas and Renz, Wolfgang and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and {\"O}zerdem, Celal and Rieger, Jan and Kellmann, Peter and Santoro, Davide and Lindel, Tomasz D. and Frauenrath, Tobias and Pfeiffer, Harald and Niendorf, Thoralf},
  title     = {Modular 32-channel transceiver coil array for cardiac MRI at 7.0T},
  series = {Magnetic Resonance in Medicine},
  volume    = {72},
  journal   = {Magnetic Resonance in Medicine},
  number    = {1},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24903},
  pages     = {276 -- 290},
  year      = {2013},
  abstract  = {Purpose To design and evaluate a modular transceiver coil array with 32 independent channels for cardiac MRI at 7.0T. Methods The modular coil array comprises eight independent building blocks, each containing four transceiver loop elements. Numerical simulations were used for B1+ field homogenization and radiofrequency (RF) safety validation. RF characteristics were examined in a phantom study. The array's suitability for accelerated high spatial resolution two-dimensional (2D) FLASH CINE imaging of the heart was examined in a volunteer study. Results Transmission field adjustments and RF characteristics were found to be suitable for the volunteer study. The signal-to-noise intrinsic to 7.0T together with the coil performance afforded a spatial resolution of 1.1 × 1.1 × 2.5 mm3 for 2D CINE FLASH MRI, which is by a factor of 6 superior to standardized CINE protocols used in clinical practice at 1.5T. The 32-channel transceiver array supports one-dimensional acceleration factors of up to R = 4 without impairing image quality significantly. Conclusion The modular 32-channel transceiver cardiac array supports accelerated and high spatial resolution cardiac MRI. The array is compatible with multichannel transmission and provides a technological basis for future clinical assessment of parallel transmission techniques at 7.0T.},
  language  = {en}
}
@inproceedings{NiemuellerLakemeyerFerrein2013,
  author    = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander},
  title     = {Aspects of integrating diverse software into robotic systems extended abstract},
  series = {ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany},
  booktitle = {ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany},
  pages     = {1 -- 2},
  year      = {2013},
  language  = {en}
}
@article{FerreinKonurLakemeyer2004,
  author    = {Ferrein, Alexander and Konur, Savas and Lakemeyer, Gerhard},
  title     = {Learning Decision Trees for Action Selection in Soccer Agents / Konur, Savas ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  pages     = {1 -- 7},
  year      = {2004},
  language  = {en}
}
@article{Ferrein2005,
  author    = {Ferrein, Alexander},
  title     = {Specifying Soccer Moves with Golog},
  series = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  journal   = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  publisher = {German Sport Univ.},
  address   = {K{\"o}ln},
  isbn      = {3-00-014576-1},
  pages     = {161 -- 165},
  year      = {2005},
  language  = {en}
}
@article{SchoppDollGraeseretal.2016,
  author    = {Schopp, Christoph and Doll, Timo and Gr{\"a}ser, Ulrich and Harzheim, Thomas and Heuermann, Holger and Kling, Rainer and Marso, Michael},
  title     = {Capacitively Coupled High-Pressure Lamp Using Coaxial Line Networks},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  volume    = {64},
  journal   = {IEEE Transactions on Microwave Theory and Techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2016.2600326},
  pages     = {3363 -- 3368},
  year      = {2016},
  abstract  = {This paper describes the development of a capacitively coupled high-pressure lamp with input power between 20 and 43 W at 2.45 GHz, using a coaxial line network. Compared with other electrodeless lamp systems, no cavity has to be used and a reduction in the input power is achieved. Therefore, this lamp is an alternative to the halogen incandescent lamp for domestic lighting. To serve the demands of domestic lighting, the filling of the lamp is optimized over all other resulting requirements, such as high efficacy at low induced powers and fast startups. A workflow to develop RF-driven plasma applications is presented, which makes use of the hot S-parameter technique. Descriptions of the fitting process inside a circuit and FEM simulator are given. Results of the combined ignition and operation network from simulations and measurements are compared. An initial prototype is built and measurements of the lamp's lighting properties are presented along with an investigation of the efficacy optimizations using large signal amplitude modulation. With this lamp, an efficacy of 135 lmW -1 is achieved.},
  language  = {en}
}
@inproceedings{HeuermannHarzheimMuehmel2021,
  author    = {Heuermann, Holger and Harzheim, Thomas and M{\"u}hmel, Marc},
  title     = {A maritime harmonic radar search and rescue system using passive and active tags},
  series = {2020 17th European Radar Conference (EuRAD)},
  booktitle = {2020 17th European Radar Conference (EuRAD)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-2-87487-061-3},
  doi       = {10.1109/EuRAD48048.2021.00030},
  pages     = {73 -- 76},
  year      = {2021},
  abstract  = {This article introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested attached to life jackets and a rescue boat. This system was able to detect and range the active tags up to a range of 5800 m in tests on the Baltic Sea with an antenna input power of only 100 W. All electronic GHz components of the system, excluding the S-band power amplifier, were custom developed for this purpose. Special attention is given to the performance and conceptual differences between passive and active tags used in the system and integration with a maritime X-band navigation radar is demonstrated.},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Line Network Network (LNN): an alternative in-fixture calibration procedure},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  isbn      = {0018-9480},
  pages     = {408 -- 413},
  year      = {1997},
  language  = {en}
}
@article{HeuermannPetersSchmitzetal.2005,
  author    = {Heuermann, Holger and Peters, N. and Schmitz, T. and Sadeghfam, Arash},
  title     = {Concept of Balanced Antennas with Load-Invariant Base Impedance Using a Two Element LC-Coupler. Peters, N., Schmitz, Th., Sadeghfam, A., Heuermann, H.},
  series = {Proceedings of the European microwave association : journal of the European microwave association},
  journal   = {Proceedings of the European microwave association : journal of the European microwave association},
  publisher = {PLUS},
  address   = {Pisa},
  pages     = {117 -- 122},
  year      = {2005},
  language  = {en}
}
@inproceedings{AlhwarinFerreinScholl2018,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces},
  series = {Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018},
  booktitle = {Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018},
  isbn      = {978-989-758-276-9},
  doi       = {10.5220/0006692802140221},
  pages     = {214 -- 221},
  year      = {2018},
  language  = {en}
}
@article{FoltzSchneiderWolfetal.2008,
  author    = {Foltz, Christian and Schneider, Nicole and Wolf, Martin R. and Kausch, Bernhard and Schlick, Christopher and Luczak, Holger},
  title     = {Usability engineering},
  series = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  journal   = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  editor    = {Nagl, Manfred},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70552-9},
  doi       = {10.1007/978-3-540-70552-9_21},
  pages     = {527 -- 554},
  year      = {2008},
  language  = {en}
}
@inproceedings{AlhwarinSchifferFerreinetal.2018,
  author    = {Alhwarin, Faraj and Schiffer, Stefan and Ferrein, Alexander and Scholl, Ingrid},
  title     = {Optimized KinectFusion Algorithm for 3D Scanning Applications},
  series = {Proceedings of the 11th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 2: BIOIMAGING},
  booktitle = {Proceedings of the 11th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 2: BIOIMAGING},
  isbn      = {978-989-758-278-3},
  doi       = {10.5220/0006594700500057},
  pages     = {50 -- 57},
  year      = {2018},
  language  = {en}
}
@article{FerreinBeckLakemeyer2007,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {A Simulation Environment for Middle-Size Robots with Multi-level Abstraction / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2007: Robot Soccer World Cup XI},
  journal   = {RoboCup 2007: Robot Soccer World Cup XI},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68846-4},
  pages     = {136 -- 147},
  year      = {2007},
  language  = {en}
}
@article{HeuermannSadeghfam2007,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {On the design of multimode integrated circuits in multilayered processes / Sadeghfam, A. ; Heuermann, H.},
  series = {European Microwave Conference, 2007, 9-12 Oct. 2007},
  journal   = {European Microwave Conference, 2007, 9-12 Oct. 2007},
  isbn      = {978-2-87487-001-9},
  pages     = {516 -- 519},
  year      = {2007},
  language  = {en}
}
@article{FerreinJacobsSchifferetal.2009,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Schiffer, Stefan and Beck, Daniel},
  title     = {Robust Collision Avoidance in Unknown Domestic Environments / Jacobs, Stefan ; Ferrein, Alexander ; Schiffer, Stefan ; Beck, Daniel ; Lakemeyer, Gerhard},
  series = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  journal   = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {116 -- 127},
  year      = {2009},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2005,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Towards a League-Independent Qualitative Soccer Theory for RoboCup / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Stolzenburg, Frieder ; Visser, Ubbo},
  series = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  journal   = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-25046-8},
  pages     = {611 -- 618},
  year      = {2005},
  language  = {en}
}
@article{RoepkeKoehlerDruryetal.2020,
  author    = {Roepke, Rene and K{\"o}hler, Klemens and Drury, Vincent and Schroeder, Ulrik and Wolf, Martin R. and Meyer, Ulrike},
  title     = {A pond full of phishing games - analysis of learning games for anti-phishing education},
  series = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  journal   = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-62433-0},
  doi       = {10.1007/978-3-030-62433-0_32020},
  pages     = {41 -- 60},
  year      = {2020},
  abstract  = {Game-based learning is a promising approach to anti-phishing education, as it fosters motivation and can help reduce the perceived difficulty of the educational material. Over the years, several prototypes for game-based applications have been proposed, that follow different approaches in content selection, presentation, and game mechanics. In this paper, a literature and product review of existing learning games is presented. Based on research papers and accessible applications, an in-depth analysis was conducted, encompassing target groups, educational contexts, learning goals based on Bloom's Revised Taxonomy, and learning content. As a result of this review, we created the publications on games (POG) data set for the domain of anti-phishing education. While there are games that can convey factual and conceptual knowledge, we find that most games are either unavailable, fail to convey procedural knowledge or lack technical depth. Thus, we identify potential areas of improvement for games suitable for end-users in informal learning contexts.},
  language  = {en}
}
@article{SchoppRohrbachLangeretal.2024,
  author    = {Schopp, Christoph and Rohrbach, Felix and Langer, Luc and Heuermann, Holger},
  title     = {Detection of welding wire length by active S11 measurement},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3356659},
  pages     = {1 -- 6},
  year      = {2024},
  abstract  = {A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6\% for a nonactive plasma and 9\% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.},
  language  = {en}
}
@misc{WaicziesKuehneWinteretal.2013,
  author    = {Waiczies, Helmar and K{\"u}hne, Andr{\´e} and Winter, Lukas and Frauenrath, Tobias and Hoffmann, Werner and Ittermann, Bernd and Waiczies, Sonia and Niendorf, Thoralf},
  title     = {Towards theranostics of rheumatoid arthritis: 1H/19F imaging of non-steroidal anti-inflammatory drugs in hand and wrist at 7 Tesla},
  series = {2013 ISMRM Annual Meeting Proceedings},
  journal   = {2013 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2013},
  abstract  = {We have developed a double-tuned ¹H/¹⁹F birdcage resonator dedicated for hand and wrist imaging at 7 T to locally image non-steroidal anti-inflammatory drugs (NSAID) such as 2-{[3-(Trifluoromethyl) phenyl]amino}benzoic acid. The preliminary in vivo images acquired by the double-tuned ¹H/¹⁹F birdcage resonator demonstrate the feasibility for ¹H/¹⁹F hand- and wrist-imaging at 7 T. While the diagnostic quality of the coil needs to be assessed in patients with inflammatory rheumatoid disease, first ¹⁹F images of the NSAID are encouraging, and point towards the prospect of applying ¹⁹F-MRI to visualize and quantify the concentration of therapeutically-active compound at the sites of inflammation.},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Procedures for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  isbn      = {0018-9456},
  pages     = {528 -- 531},
  year      = {1993},
  language  = {en}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {DISMED - an innovation portal for printing and media industry},
  series = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  booktitle = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  publisher = {CORDIS Archive},
  address   = {[s.l.]},
  pages     = {9 S. : graph. Darst.},
  year      = {2001},
  language  = {en}
}
@inproceedings{SteinbauerFerrein2019,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {CogRob 2018 : Cognitive Robotics Workshop. Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018). Tempe, AZ, USA, October 27th, 2018.},
  series = {CEUR workshop proceedings},
  booktitle = {CEUR workshop proceedings},
  number    = {Vol-2325},
  issn      = {1613-0073},
  pages     = {46 Seiten},
  year      = {2019},
  language  = {en}
}
@article{FerreinBeckLakemeyer2009,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Landmark-Based Representations for Navigating Holonomic Soccer Robots / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  journal   = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-02921-9},
  pages     = {25 -- 36},
  year      = {2009},
  language  = {en}
}
@inproceedings{FerreinBharatheeshaSchifferetal.2019,
  author    = {Ferrein, Alexander and Bharatheesha, Mukunda and Schiffer, Stefan and Corbato, Carlos Hernandez},
  title     = {TRROS 2018 : Teaching Robotics with ROS Workshop at ERF 2018; Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018},
  series = {CEUR Workshop Proceedings},
  booktitle = {CEUR Workshop Proceedings},
  number    = {Vol-2329},
  issn      = {1613-0073},
  pages     = {68 Seiten},
  year      = {2019},
  language  = {en}
}
@article{HeuermannSadeghfam2008,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Electrically tunable bandpass filter with integrated carrier suppression for UHF RFID systems / Sadeghfam, Arash ; Heuermann, Holger},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {306 -- 309},
  year      = {2008},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {Calibration of a Network Analyzer Without a Thru Connection for Nonlinear and Multiport Measurements},
  series = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  journal   = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  isbn      = {0018-9480},
  pages     = {2505 -- 2510},
  year      = {2008},
  language  = {en}
}
@article{HeuermannSadeghfam2009,
  author    = {Heuermann, Holger and Sadeghfam, A.},
  title     = {Enhanced system architecture for rugged wide band data transmission / Sadeghfam, A. ; Heuermann, H.},
  series = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  journal   = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-2-87487-014-9},
  pages     = {347 -- 350},
  year      = {2009},
  language  = {en}
}
@article{HeuermannThalayasingam2009,
  author    = {Heuermann, Holger and Thalayasingam, K.},
  title     = {Novel vector non-linear measurement system for intermodulation measurements / Thalayasingam, K.; Heuermann, H.},
  series = {European Microwave Conference, 2009 : EuMC 2009 ; Sept. 29, 2009 - Oct. 1, 2009, Rome, Italy ; part of European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association ... Endorsed by IEEE},
  journal   = {European Microwave Conference, 2009 : EuMC 2009 ; Sept. 29, 2009 - Oct. 1, 2009, Rome, Italy ; part of European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association ... Endorsed by IEEE},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-4748-0},
  pages     = {926 -- 929},
  year      = {2009},
  language  = {en}
}
@article{RitzStender2006,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Modeling of B2B mobile commerce processes},
  series = {International Journal of Production Economics},
  volume    = {101},
  journal   = {International Journal of Production Economics},
  number    = {1},
  issn      = {0925-5273},
  doi       = {10.1016/j.ijpe.2005.05.017},
  pages     = {128 -- 139},
  year      = {2006},
  language  = {en}
}
@inproceedings{GebhardtRitzSiekmannetal.2014,
  author    = {Gebhardt, Andreas and Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Additive manufacturing businesses in the process chain of individualized mass products},
  series = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  booktitle = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  editor    = {Demmer, Axel},
  publisher = {Fraunhofer},
  address   = {Stuttgart},
  isbn      = {978-3-8396-9128-1 (E-Book)},
  year      = {2014},
  language  = {en}
}
@article{WolfFoltzSchlicketal.1999,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Groupware support for chemical process design / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {343 -- 347},
  year      = {1999},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.},
  title     = {The pyramid assessment framework for 'competence developing games'},
  series = {Communications in Computer and Information Science},
  volume    = {618},
  booktitle = {Communications in Computer and Information Science},
  editor    = {Stephanidis, C.},
  publisher = {Springer},
  isbn      = {978-331940541-4},
  issn      = {1865-0929},
  doi       = {10.1007/978-3-319-40542-1_37},
  pages     = {232 -- 237},
  year      = {2016},
  language  = {en}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@inproceedings{FuchsRitzStrauch2012,
  author    = {Fuchs, Britta and Ritz, Thomas and Strauch, Jakob},
  title     = {Usability of mobile applications : dissemination of usability engineering in small and medium enterprises},
  series = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  booktitle = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  editor    = {Obaidat, Mohammad S.},
  publisher = {SciTePress},
  address   = {[Lissabon]},
  isbn      = {978-989-8565-23-5},
  pages     = {272 -- 277},
  year      = {2012},
  language  = {en}
}
@inproceedings{FuchsRitz2014,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Usability for Blended Shopping - Solving Major Flaws by Applying Usability Engineering and Proven Integration Technologies},
  series = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  booktitle = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  isbn      = {978-989-758-043-7},
  doi       = {10.5220/0005113502160223},
  pages     = {216 -- 223},
  year      = {2014},
  language  = {en}
}
@article{HeuermannSadeghfamBoehm2005,
  author    = {Heuermann, Holger and Sadeghfam, Arash and Boehm, H.},
  title     = {Ultra Compact Multi-Mode Filter with Novel Rat-Race Inductor. Sadeghfam, Arash; Heuermann, Holger; Boehm, H.},
  series = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  journal   = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  publisher = {Horizon House Publ},
  address   = {London},
  isbn      = {2-9600551-0-1},
  pages     = {4 pp.},
  year      = {2005},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2010,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  series = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  journal   = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  pages     = {1 -- 10},
  year      = {2010},
  language  = {en}
}
@inproceedings{HarzheimHeuermann2018,
  author    = {Harzheim, Thomas and Heuermann, Holger},
  title     = {Phase Repeatable Synthesizers as a New Harmonic Phase Standard for Nonlinear Network Analysis},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  booktitle = {IEEE Transactions on Microwave Theory and Techniques},
  publisher = {IEEE},
  doi       = {10.1109/TMTT.2018.2817513},
  pages     = {1 -- 8},
  year      = {2018},
  language  = {en}
}
@article{Heuermann1999,
  author    = {Heuermann, Holger},
  title     = {Calibration procedures with series impedances and unknown lines simplify on-wafer measurements},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  isbn      = {0018-9480},
  pages     = {1 -- 5},
  year      = {1999},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Error corrected impedance measurements with a network analyzer},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  isbn      = {0018-9456},
  pages     = {295 -- 299},
  year      = {1995},
  language  = {en}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Personalized Information Services: Production and Distribution of these Services employing Mass-Customization},
  year      = {2002},
  language  = {en}
}
@inproceedings{StephanHeuermannPrantner2016,
  author    = {Stephan, Achim and Heuermann, Holger and Prantner, Michael},
  title     = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet},
  series = {46th European Microwave Conference (EuMC)},
  booktitle = {46th European Microwave Conference (EuMC)},
  publisher = {IEEE},
  isbn      = {978-2-87487-043-9},
  doi       = {10.1109/EuMC.2016.7824490},
  pages     = {902 -- 905},
  year      = {2016},
  language  = {en}
}
@misc{FrauenrathPfeifferHezeletal.2012,
  author    = {Frauenrath, Tobias and Pfeiffer, Harald and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and Gr{\"a}ßl, Andreas and Santoro, Davide and {\"O}zerdem, Celal and Renz, Wolfgang and Greiser, Andreas and Niendorf, Thoralf},
  title     = {Lessons learned from cardiac MRI at 7.0 T: LV function assessment at 3.0 T using local multi-channel transceiver coil arrays},
  series = {2012 ISMRM Annual Meeting Proceedings},
  journal   = {2012 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2012},
  abstract  = {Cardiac MR (CMR) is of proven clinical value but also an area of vigorous ongoing research since image quality is not always exclusively defined by signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR). Recent developments of CMR at 7.0 T have been driven by pioneering explorations into novel multichannel transmit and receive coil array technology to tackle the challenges B1+-field inhomogeneities, to offset specific-absorption rate (SAR) constraints and to reduce banding artifacts in SSFP imaging. For this study, recognition of the benefits and performance of local surface Tx/Rx-array structures recently established at 7.0 T inspired migration to 3.0 T, where RF inhomogeneities and SAR limitations encountered in routine clinical CMR, though somewhat reduced versus the 7.0 T situation, remain significant. For all these reasons, this study was designed to build and examine the feasibility of a local four channel Tx/Rx cardiac coil array for anatomical and functional cardiac imaging at 3.0 T. For comparison, a homebuilt 4 channel Rx cardiac coil array exhibiting the same geometry as the Tx/Rx coil and a Rx surface coil array were used.},
  language  = {en}
}
@article{KobFrauenrath2009,
  author    = {Kob, Malte and Frauenrath, Tobias},
  title     = {A system for parallel measurement of glottis opening and larynx position},
  series = {Biomedical Signal Processing and Control},
  volume    = {4},
  journal   = {Biomedical Signal Processing and Control},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1746-8108},
  doi       = {10.1016/j.bspc.2009.03.004},
  pages     = {221 -- 228},
  year      = {2009},
  abstract  = {The simultaneous assessment of glottal dynamics and larynx position can be beneficial for the diagnosis of disordered voice or speech production and swallowing. Up to now, methods either concentrate on assessment of the glottis opening using optical, acoustical or electrical (electroglottography, EGG) methods, or on visualisation of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques. The method presented here makes use of a time-multiplex measurement approach of space-resolved transfer impedances through the larynx. The fast sequence of measurements allows a quasi simultaneous assessment of both larynx position and EGG signal using up to 32 transmit-receive signal paths. The system assesses the dynamic opening status of the glottis as well as the vertical and back/forward motion of the larynx. Two electrode-arrays are used for the measurement of the electrical transfer impedance through the neck in different directions. From the acquired data the global and individual conductivity is calculated as well as a 2D point spatial representation of the minimum impedance. The position information is shown together with classical EGG signals allowing a synchronous visual assessment of glottal area and larynx position. A first application to singing voice analysis is presented that indicate a high potential of the method for use as a non-invasive tool in the diagnosis of voice, speech, and swallowing disorders.},
  language  = {en}
}
@inproceedings{EltesterFerreinSchiffer2020,
  author    = {Eltester, Niklas Sebastian and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A smart factory setup based on the RoboCup logistics league},
  series = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  booktitle = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ICPS48405.2020.9274766},
  pages     = {297 -- 302},
  year      = {2020},
  abstract  = {In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.},
  language  = {en}
}
@inproceedings{EllerwegRitz2008,
  author    = {Ellerweg, Roland and Ritz, Thomas},
  title     = {Tool supported requirements analysis for the user centered development of mobile enterprise software},
  series = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  booktitle = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  editor    = {Roth, J{\"o}rg},
  publisher = {IADIS Press},
  address   = {[Lisboa]},
  isbn      = {978-972-8924-62-1},
  pages     = {160 -- 162},
  year      = {2008},
  abstract  = {A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.},
  language  = {en}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin R. and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@inproceedings{FerreinPotgieterSteinbauer2009,
  author    = {Ferrein, Alexander and Potgieter, Anet and Steinbauer, Gerald},
  title     = {Self-aware robots - What do we need from learning, deliberation, and reactive control?},
  series = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  booktitle = {HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009},
  publisher = {AAAI Pr.},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {A crazy little thing called sustainability},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/9CQR-VC94},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {Achieving the 17 Sustainable Development Goals (SDGs) set by the United Nations (UN) in 2015 requires global collaboration between different stakeholders. Industry, and in particular engineers who shape industrial developments, have a special role to play as they are confronted with the responsibility to holistically reflect sustainability in industrial processes. This means that, in addition to the technical specifications, engineers must also question the effects of their own actions on an ecological, economic and social level in order to ensure sustainable action and contribute to the achievement of the SDGs. However, this requires competencies that enable engineers to apply all three pillars of sustainability to their own field of activity and to understand the global impact of industrial processes. In this context, it is relevant to understand how industry already reflects sustainability and to identify competences needed for sustainable development.},
  language  = {en}
}
@article{HeuermannSadeghfam2004,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Novel balanced inductor for compact differential systems / Sadeghfam, Arash; Heuermann, Holger},
  series = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  journal   = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  publisher = {Horizon House Publ.},
  address   = {London},
  isbn      = {1-580-53992-0},
  pages     = {709 -- 712},
  year      = {2004},
  language  = {en}
}