@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, Peter K. and Lade, H. and Leers, D.},
  title     = {CVD Diamond Growth: Gas Compositions and Film Properties / P.K. Bachmann, H.J. Hagemann, H. Lade, D. Leers, D.U. Wiechert and H. Wilson},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...},
  publisher = {International Communications Specialists},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{StaeudleSeynnesLapsetal.2022,
  author    = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Altered gastrocnemius contractile behavior in former achilles tendon rupture patients during walking},
  series = {Frontiers in Physiology},
  volume    = {13},
  journal   = {Frontiers in Physiology},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2022.792576},
  pages     = {12 Seiten},
  year      = {2022},
  abstract  = {Achilles tendon rupture (ATR) remains associated with functional limitations years after injury. Architectural remodeling of the gastrocnemius medialis (GM) muscle is typically observed in the affected leg and may compensate force deficits caused by a longer tendon. Yet patients seem to retain functional limitations during—low-force—walking gait. To explore the potential limits imposed by the remodeled GM muscle-tendon unit (MTU) on walking gait, we examined the contractile behavior of muscle fascicles during the stance phase. In a cross-sectional design, we studied nine former patients (males; age: 45 ± 9 years; height: 180 ± 7 cm; weight: 83 ± 6 kg) with a history of complete unilateral ATR, approximately 4 years post-surgery. Using ultrasonography, GM tendon morphology, muscle architecture at rest, and fascicular behavior were assessed during walking at 1.5 m⋅s-1 on a treadmill. Walking patterns were recorded with a motion capture system. The unaffected leg served as control. Lower limbs kinematics were largely similar between legs during walking. Typical features of ATR-related MTU remodeling were observed during the stance sub-phases corresponding to series elastic element (SEE) lengthening (energy storage) and SEE shortening (energy release), with shorter GM fascicles (36 and 36\%, respectively) and greater pennation angles (8° and 12°, respectively). However, relative to the optimal fascicle length for force production, fascicles operated at comparable length in both legs. Similarly, when expressed relative to optimal fascicle length, fascicle contraction velocity was not different between sides, except at the time-point of peak series elastic element (SEE) length, where it was 39 ± 49\% lower in the affected leg. Concomitantly, fascicles rotation during contraction was greater in the affected leg during the whole stance-phase, and architectural gear ratios (AGR) was larger during SEE lengthening. Under the present testing conditions, former ATR patients had recovered a relatively symmetrical walking gait pattern. Differences in seen AGR seem to accommodate the profound changes in MTU architecture, limiting the required fascicle shortening velocity. Overall, the contractile behavior of the GM fascicles does not restrict length- or velocity-dependent force potentials during this locomotor task.},
  language  = {en}
}
@article{StaeudleSeynnesLapsetal.2021,
  author    = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and G{\"o}ll, Fabian and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Recovery from achilles tendon repair: a combination of Postsurgery Outcomes and Insufficient remodeling of muscle and tendon},
  series = {Medicine \& Science in Sports \& Exercise},
  volume    = {53},
  journal   = {Medicine \& Science in Sports \& Exercise},
  number    = {7},
  publisher = {American College of Sports Medicine},
  address   = {Philadelphia, Pa.},
  issn      = {1530-0315},
  doi       = {10.1249/MSS.0000000000002592},
  pages     = {1356 -- 1366},
  year      = {2021},
  abstract  = {Achilles tendon rupture (ATR) patients have persistent functional deficits in the triceps surae muscle-tendon unit (MTU). The complex remodeling of the MTU accompanying these deficits remains poorly understood. The purpose of the present study was to associate in vivo and in silico data to investigate the relations between changes inMTU properties and strength deficits inATR patients. Methods: Elevenmale subjects who had undergone surgical repair of complete unilateral ATR were examined 4.6 ± 2.0 (mean ± SD) yr after rupture. Gastrocnemius medialis (GM) tendon stiffness, morphology, and muscle architecture were determined using ultrasonography. The force-length relation of the plantar flexor muscles was assessed at five ankle joint angles. In addition, simulations (OpenSim) of the GM MTU force-length properties were performed with various iterations of MTU properties found between the unaffected and the affected side. Results: The affected side of the patients displayed a longer, larger, and stiffer GM tendon (13\% ± 10\%, 105\% ± 28\%, and 54\% ± 24\%, respectively) compared with the unaffected side. The GM muscle fascicles of the affected side were shorter (32\% ± 12\%) and with greater pennation angles (31\% ± 26\%). A mean deficit in plantarflexion moment of 31\% ± 10\% was measured. Simulations indicate that pairing an intact muscle with a longer tendon shifts the optimal angular range of peak force outside physiological angular ranges, whereas the shorter muscle fascicles and tendon stiffening seen in the affected side decrease this shift, albeit incompletely. Conclusions: These results suggest that the substantial changes in MTU properties found in ATR patients may partly result from compensatory remodeling, although this process appears insufficient to fully restore muscle function.},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, Peter K. and Lade, H. and Leers, D.},
  title     = {Influence of the gas phase on diamond deposition and diamond properties. Bachmann, P. K.; Hagemann, H.J.; Lade, H.; Leers, D.; Picht, F.; Wiechert, D. U.},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  publisher = {International Communications Specialists, Inc.},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{ChristenKowalskiBartelt2010,
  author    = {Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain},
  series = {Cold Regions Science and Technology},
  volume    = {63},
  journal   = {Cold Regions Science and Technology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2010.04.005},
  pages     = {1 -- 14},
  year      = {2010},
  abstract  = {Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy-Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vall{\´e}e de la Sionne test site.},
  language  = {en}
}
@article{KolditzAlbinAbeletal.2016,
  author    = {Kolditz, Melanie and Albin, Thivaharan and Abel, Dirk and Fasse, Alessandro and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Evaluation of foot position and orientation as manipulated variables to control external knee adduction moments in leg extension training},
  series = {Computer methods and programs in biomedicine},
  volume    = {171},
  journal   = {Computer methods and programs in biomedicine},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-2607},
  doi       = {10.1016/j.cmpb.2016.09.005},
  pages     = {81 -- 86},
  year      = {2016},
  abstract  = {Background and Objective Effective leg extension training at a leg press requires high forces, which need to be controlled to avoid training-induced damage. In order to avoid high external knee adduction moments, which are one reason for unphysiological loadings on knee joint structures, both training movements and the whole reaction force vector need to be observed. In this study, the applicability of lateral and medial changes in foot orientation and position as possible manipulated variables to control external knee adduction moments is investigated. As secondary parameters both the medio-lateral position of the center of pressure and the frontal-plane orientation of the reaction force vector are analyzed. Methods Knee adduction moments are estimated using a dynamic model of the musculoskeletal system together with the measured reaction force vector and the motion of the subject by solving the inverse kinematic and dynamic problem. Six different foot conditions with varying positions and orientations of the foot in a static leg press are evaluated and compared to a neutral foot position. Results Both lateral and medial wedges under the foot and medial and lateral shifts of the foot can influence external knee adduction moments in the presented study with six healthy subjects. Different effects are observed with the varying conditions: the pose of the leg is changed and the direction and center of pressure of the reaction force vector is influenced. Each effect results in a different direction or center of pressure of the reaction force vector. Conclusions The results allow the conclusion that foot position and orientation can be used as manipulated variables in a control loop to actively control knee adduction moments in leg extension training.},
  language  = {en}
}
@article{KaramanidisAlbrachtBraunsteinetal.2011,
  author    = {Karamanidis, Kiros and Albracht, Kirsten and Braunstein, Bjoern and Catala, Maria Moreno and Goldmann, Jan-Peter and Br{\"u}ggemann, Gert-Peter},
  title     = {Lower leg musculoskeletal geometry and sprint performance},
  series = {Gait and Posture},
  volume    = {34},
  journal   = {Gait and Posture},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0966-6362},
  doi       = {10.1016/j.gaitpost.2011.03.009},
  pages     = {138 -- 141},
  year      = {2011},
  abstract  = {The purpose of this study was to investigate whether sprint performance is related to lower leg musculoskeletal geometry within a homogeneous group of highly trained 100-m sprinters. Using a cluster analysis, eighteen male sprinters were divided into two groups based on their personal best (fast: N = 11, 10.30 ± 0.07 s; slow: N = 7, 10.70 ± 0.08 s). Calf muscular fascicle arrangement and Achilles tendon moment arms (calculated by the gradient of tendon excursion versus ankle joint angle) were analyzed for each athlete using ultrasonography. Achilles tendon moment arm, foot and ankle skeletal geometry, fascicle arrangement as well as the ratio of fascicle length to Achilles tendon moment arm showed no significant (p > 0.05) correlation with sprint performance, nor were there any differences in the analyzed musculoskeletal parameters between the fast and slow sprinter group. Our findings provide evidence that differences in sprint ability in world-class athletes are not a result of differences in the geometrical design of the lower leg even when considering both skeletal and muscular components.},
  language  = {en}
}
@article{SaretzkiBergmannDahmannetal.2021,
  author    = {Saretzki, Charlotte and Bergmann, Ole and Dahmann, Peter and Janser, Frank and Keimer, Jona and Machado, Patricia and Morrison, Audry and Page, Henry and Pluta, Emil and St{\"u}bing, Felix and K{\"u}pper, Thomas},
  title     = {Are small airplanes safe with regards to COVID-19 transmission?},
  series = {Journal of Travel Medicine},
  volume    = {28},
  journal   = {Journal of Travel Medicine},
  number    = {7},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1708-8305},
  doi       = {10.1093/jtm/taab105},
  year      = {2021},
  language  = {en}
}
@article{KozhalakovaZhubanovaMansurovetal.2010,
  author    = {Kozhalakova, A. A. and Zhubanova, Azhar A. and Mansurov, Z. A. and Digel, Ilya and Tazhibayeva, S. M. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice shell},
  series = {Science of Central Asia},
  journal   = {Science of Central Asia},
  pages     = {50 -- 54},
  year      = {2010},
  language  = {en}
}
@article{BergmannMoehrenBraunetal.2023,
  author    = {Bergmann, Ole and M{\"o}hren, Felix and Braun, Carsten and Janser, Frank},
  title     = {On the influence of elasticity on swept propeller noise},
  series = {AIAA SCITECH 2023 Forum},
  journal   = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2023-0210},
  year      = {2023},
  abstract  = {High aerodynamic efficiency requires propellers with high aspect ratios, while propeller sweep potentially reduces noise. Propeller sweep and high aspect ratios increase elasticity and coupling of structural mechanics and aerodynamics, affecting the propeller performance and noise. Therefore, this paper analyzes the influence of elasticity on forward-swept, backward-swept, and unswept propellers in hover conditions. A reduced-order blade element momentum approach is coupled with a one-dimensional Timoshenko beam theory and Farassat's formulation 1A. The results of the aeroelastic simulation are used as input for the aeroacoustic calculation. The analysis shows that elasticity influences noise radiation because thickness and loading noise respond differently to deformations. In the case of the backward-swept propeller, the location of the maximum sound pressure level shifts forward by 0.5 °, while in the case of the forward-swept propeller, it shifts backward by 0.5 °. Therefore, aeroacoustic optimization requires the consideration of propeller deformation.},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI},
  volume    = {24},
  journal   = {K{\"u}nstliche Intelligenz : KI},
  number    = {2},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-010-0041-3},
  pages     = {175 -- 178},
  year      = {2010},
  abstract  = {In this extended abstract we describe the robot programming and planning language READYLOG, a GOLOG dialect which was developed to support the decision making of robots acting in dynamic real-time domains like robotic soccer. The formal framework of READYLOG, which is based on the situation calculus, features imperative control structures like loops and procedures, allows for decision-theoretic planning, and accounts for a continuously changing world. We developed high-level controllers in READYLOG for our soccer robots in RoboCup's Middle-size league, but also for service robots and for autonomous agents in interactive computer games.},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2015,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars Peter and Rittweger, J{\"o}rn},
  title     = {On the relationship between tibia torsional deformation and regional muscle contractions in habitual human exercises in vivo},
  series = {Journal of Biomechanics},
  volume    = {48},
  journal   = {Journal of Biomechanics},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2014.12.031},
  pages     = {456 -- 464},
  year      = {2015},
  language  = {en}
}
@article{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  journal   = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17432-2_40},
  pages     = {395 -- 404},
  year      = {2010},
  language  = {en}
}
@article{FunkeRobinsonHendricketal.2010,
  author    = {Funke, Harald and Robinson, A. E. and Hendrick, P. and Wagemakers, R.},
  title     = {Design and Testing of a Micromix Combustor With Recuperative Wall Cooling for a Hydrogen Fuelled µ-Scale Gas Turbine},
  series = {Proceedings of the ASME Turbo Expo 2010 : presented at the 2010 ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK / sponsored by the International Gas Turbine Institute / Vol. 5: Industrial and cogeneration ; microturbines and small turbomachinery ; oil and gas applications ; wind turbine technology},
  journal   = {Proceedings of the ASME Turbo Expo 2010 : presented at the 2010 ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK / sponsored by the International Gas Turbine Institute / Vol. 5: Industrial and cogeneration ; microturbines and small turbomachinery ; oil and gas applications ; wind turbine technology},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4400-7},
  pages     = {587 -- 596},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a Non-Prolog Implementation of Golog for Embedded Systems},
  publisher = {AAAI},
  address   = {Menlo Park},
  pages     = {20 -- 28},
  year      = {2010},
  language  = {en}
}
@article{BelavyAlbrachtBrueggemannetal.2016,
  author    = {Belavy, Daniel L. and Albracht, Kirsten and Br{\"u}ggemann, Gert-Peter and Vergroesen, Pieter-Paul A. and Dieen, Jaap H. van},
  title     = {Can exercise positively influence the intervertebral disc?},
  series = {Sports Medicine},
  volume    = {46},
  journal   = {Sports Medicine},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1179-2035},
  doi       = {10.1007/s40279-015-0444-2},
  pages     = {473 -- 485},
  year      = {2016},
  abstract  = {To better understand what kinds of sports and exercise could be beneficial for the intervertebral disc (IVD), we performed a review to synthesise the literature on IVD adaptation with loading and exercise. The state of the literature did not permit a systematic review; therefore, we performed a narrative review. The majority of the available data come from cell or whole-disc loading models and animal exercise models. However, some studies have examined the impact of specific sports on IVD degeneration in humans and acute exercise on disc size. Based on the data available in the literature, loading types that are likely beneficial to the IVD are dynamic, axial, at slow to moderate movement speeds, and of a magnitude experienced in walking and jogging. Static loading, torsional loading, flexion with compression, rapid loading, high-impact loading and explosive tasks are likely detrimental for the IVD. Reduced physical activity and disuse appear to be detrimental for the IVD. We also consider the impact of genetics and the likelihood of a 'critical period' for the effect of exercise in IVD development. The current review summarises the literature to increase awareness amongst exercise, rehabilitation and ergonomic professionals regarding IVD health and provides recommendations on future directions in research.},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2014,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars Peter and Rittweger, J{\"o}rn},
  title     = {A novel optical approach for assessing in vivo bone segment deformation and its application in muscle-bone relationship studies in humans},
  series = {Journal of Orthopaedic Translation},
  volume    = {2},
  journal   = {Journal of Orthopaedic Translation},
  number    = {4},
  publisher = {Elsevier},
  address   = {Singapore},
  issn      = {2214-0328},
  doi       = {10.1016/j.jot.2014.07.078},
  pages     = {238 -- 238},
  year      = {2014},
  language  = {en}
}
@article{RibitschHeumannTrotschaetal.2011,
  author    = {Ribitsch, D. and Heumann, S. and Trotscha, E. and Herrero Acero, E. and Greimel, K. and Leber, R. and Birner-Gruenberger, R. and Deller, S. and Eiteljoerg, I. and Remler, P. and Weber, Th. and Siegert, Petra and Maurer, Karl-Heinz and Donelli, I. and Freddi, G. and Schwab, H. and Guebitz, G. M.},
  title     = {Hydrolysis of polyethyleneterephthalate by p-nitrobenzylesterase from Bacillus subtilis},
  series = {Biotechnology progress},
  volume    = {Vol. 27},
  journal   = {Biotechnology progress},
  number    = {Iss. 4},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1520-6033 (E-Journal); 8756-7938 (Print)},
  pages     = {951 -- 960},
  year      = {2011},
  language  = {en}
}
@article{WilsonBlomeLaFave1996,
  author    = {Wilson, Thomas L. and Blome, Hans-Joachim and LaFave, Norman},
  title     = {Astrophysical Cosmology Using a Lunar Ligo},
  series = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  journal   = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  publisher = {The Society},
  address   = {New York},
  isbn      = {0-7844-0177-2},
  pages     = {861 -- 863},
  year      = {1996},
  language  = {en}
}
@article{BaumannLaraHubbertenetal.1997,
  author    = {Baumann, Marcus and Lara, R.J. and Hubberten, D.N. and Thomas, D. N.},
  title     = {Dissolved organic matter studies in enclosed systems: Application of hydophobic fractionation for the assessment of organic nitrogen dynamics / Lara, R.J. ; Hubberten, U. ; Thomas, D.N. ; Baumann, M.E.M. ; Kattner, G.},
  series = {Journal of Marine Systems. 13 (1997), H. 1-4},
  journal   = {Journal of Marine Systems. 13 (1997), H. 1-4},
  isbn      = {0924-7963},
  pages     = {155 -- 161},
  year      = {1997},
  language  = {en}
}
@article{BaumannThomasGleitz1992,
  author    = {Baumann, Marcus and Thomas, D. N. and Gleitz, M.},
  title     = {Efficiency of carbon assimilation and photoacclimation in a small unicellular Chaetoceros species from the Weddel Sea (Antarctica): Influence of temperature and irridiance / Thomas, D. ; Baumann, M.E.M. ; Gleitz, M.},
  series = {Journal of Experimental Marine Biology and Ecology. 157 (1992), H. 2},
  journal   = {Journal of Experimental Marine Biology and Ecology. 157 (1992), H. 2},
  isbn      = {0022-0981},
  pages     = {195 -- 209},
  year      = {1992},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, Peter K. and Lade, H. and Leers, D.},
  title     = {Diamond chemical vapor deposition: gas compositions and film properties / Bachmann, P.K.; Hagemann, H.-J.; Lade, H; Leers, D.; Picht, F.; Wiechert, D.U.; Wilson, H.},
  series = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ...},
  journal   = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ...},
  address   = {Pittsburgh, Penn.},
  isbn      = {1-55899-239-1},
  pages     = {267 -- 277},
  year      = {1994},
  language  = {en}
}
@article{LeimenaArtmannDachwaldetal.2010,
  author    = {Leimena, W. and Artmann, Gerhard and Dachwald, Bernd and Temiz Artmann, Ayseg{\"u}l and Gossmann, Matthias and Digel, Ilya},
  title     = {Feasibility of an in-situ microbial decontamination of an ice-melting probe},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {12},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  isbn      = {1562-3920},
  doi       = {10.18321/ectj37},
  pages     = {145 -- 150},
  year      = {2010},
  abstract  = {Autonomous robotic systems for penetrating thick ice shells with simultaneous collecting of scientific data are very promising devices in both terrestrial (glacier, climate research) and extra-terrestrial applications. Technical challenges in development of such systems are numerous and include 3D-navigation, an appropriate energy source, motion control, etc. Not less important is the problem of forward contamination of the pristine glacial environments with microorganisms and biomolecules from the surface of the probe. This study was devoted to establishing a laboratory model for microbial contamination of a newly constructed ice-melting probe called IceMole and to analyse the viability and amount of the contaminating microorganisms as a function of distance. The used bacterial strains were Bacillus subtilis (ATCC 6051) and Escherichia coli (ATCC 11775). The main objective was development of an efficient and reliable in-situ decontamination method of the melting probe. Therefore, several chemical substances were tested in respect of their efficacy to eliminate bacteria on the surface of the melting probe at low temperature (0 - 5 °C) and at continuous dilution by melted water. Our study has shown that at least 99.9\% decontamination of the IceMole can be successfully achieved by the injection of 30\% (v/v) hydrogen peroxide and 3\% (v/v) sodium hypochlorite into the drilling site. We were able to reproduce this result in both time-dependent and depth-dependent experiments. The sufficient amount of 30\% (v/v) H₂O₂ or 3\% (v/v) NaClO has been found to be approximately 18 L per cm² of the probe's surface.},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, S. V. and Behbahani, Mehdi and Laumen, M. and Kaufmann, T. and Hormes, M. and Behr, M. and Schmitz-Rode, T. and Steinseifer, U.},
  title     = {Investigation of Steady Flow Through a Realistic Model of the Thoracic Human Aorta Using 3D Stereo PIV and CFD-Simulation},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniNamWalugaetal.2010,
  author    = {Behbahani, Mehdi and Nam, J. and Waluga, C. and Behr, M. and Pasquali, M. and Mottaghy, K.},
  title     = {Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs},
  volume    = {56},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {85},
  year      = {2010},
  language  = {en}
}
@article{FerreinSiebelSteinbauer2010,
  author    = {Ferrein, Alexander and Siebel, Nils T. and Steinbauer, Gerald},
  title     = {Hybrid control for autonomous systems — Integrating learning, deliberation and reactive control},
  series = {Robotics and Autonomous Systems},
  volume    = {58},
  journal   = {Robotics and Autonomous Systems},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0921-8890},
  doi       = {10.1016/j.robot.2010.06.003},
  pages     = {1037 -- 1038},
  year      = {2010},
  language  = {en}
}
@article{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based behavior engine for controlling the humanoid robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  journal   = {RoboCup 2009: Robot Soccer World Cup XIII},
  publisher = {Springer},
  address   = {Heidelberg},
  doi       = {10.1007/978-3-642-11876-0_21},
  pages     = {240 -- 251},
  year      = {2010},
  language  = {en}
}
@article{OrzadaSolbachGratzetal.2019,
  author    = {Orzada, Stephan and Solbach, Klaus and Gratz, Marcel and Brunheim, Sascha and Fiedler, Thomas M. and Johst, S{\"o}ren and Bitz, Andreas and Shooshtary, Samaneh and Abuelhaija, Ashraf and Voelker, Maximilian N. and Rietsch, Stefan H. G. and Kraff, Oliver and Maderwald, Stefan and Fl{\"o}ser, Martina and Oehmingen, Mark and Quick, Harald H. and Ladd, Mark E.},
  title     = {A 32-channel parallel transmit system add-on for 7T MRI},
  series = {Plos one},
  journal   = {Plos one},
  doi       = {10.1371/journal.pone.0222452},
  year      = {2019},
  language  = {en}
}
@article{OrzadaBitzJohstetal.2017,
  author    = {Orzada, Stephan and Bitz, Andreas and Johst, S{\"o}ren and Gratz, Marcel and V{\"o}lker, Maximilian N. and Kraff, Oliver and Abuelhaija, Ashraf and Fiedler, Thomas M. and Solbach, Klaus and Quick, Harald H. and Ladd, Mark E.},
  title     = {Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI},
  series = {Frontiers in Physics},
  volume    = {5},
  journal   = {Frontiers in Physics},
  number    = {Jun},
  issn      = {2296-424X},
  doi       = {10.3389/fphy.2017.00017},
  year      = {2017},
  language  = {en}
}
@article{SchollPalmLehmannetal.1998,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus},
  title     = {Quantitative Farbmessung in laryngoskopischen Bildern. Palm, C; Scholl, I; Lehmann, TM; Spitzer, K.},
  series = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  journal   = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63885-7},
  pages     = {412 -- 416},
  year      = {1998},
  language  = {en}
}
@article{FiedlerLaddBitz2017,
  author    = {Fiedler, Thomas M. and Ladd, Mark E. and Bitz, Andreas},
  title     = {RF safety assessment of a bilateral four-channel transmit/receive 7 Tesla breast coil: SAR versus temperature limits},
  series = {Medical Physics},
  volume    = {44},
  journal   = {Medical Physics},
  number    = {1},
  doi       = {10.1002/mp.12034},
  pages     = {143 -- 157},
  year      = {2017},
  language  = {en}
}
@article{DieringerRenzLindeletal.2011,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz Dawid and Seifert, Frank and Frauenrath, Tobias and von Knobelsdorf-Brenkenhoff, Florian and Waiczies, Helmar and Hoffmann, Werner and Rieger, Jan and Pfeiffer, Harald and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Design and application of a four-channel transmit/receive surface coil for functional cardiac imaging at 7T},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {33},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {3},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22451},
  pages     = {736 -- 741},
  year      = {2011},
  abstract  = {Purpose To design and evaluate a four-channel cardiac transceiver coil array for functional cardiac imaging at 7T. Materials and Methods A four-element cardiac transceiver surface coil array was developed with two rectangular loops mounted on an anterior former and two rectangular loops on a posterior former. specific absorption rate (SAR) simulations were performed and a Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-1 calibration method was applied prior to obtain 2D FLASH CINE (mSENSE, R = 2) images from nine healthy volunteers with a spatial resolution of up to 1 × 1 × 2.5 mm3. Results Tuning and matching was found to be better than 10 dB for all subjects. The decoupling (S21) was measured to be >18 dB between neighboring loops, >20 dB for opposite loops, and >30 dB for other loop combinations. SAR values were well within the limits provided by the IEC. Imaging provided clinically acceptable signal homogeneity with an excellent blood-myocardium contrast applying the Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-2 calibration approach. Conclusion A four-channel cardiac transceiver coil array for 7T was built, allowing for cardiac imaging with clinically acceptable signal homogeneity and an excellent blood-myocardium contrast. Minor anatomic structures, such as pericardium, mitral, and tricuspid valves and their apparatus, as well as trabeculae, were accurately delineated.},
  language  = {en}
}
@article{FiedlerLaddClemensetal.2020,
  author    = {Fiedler, Thomas M. and Ladd, Mark E. and Clemens, Markus and Bitz, Andreas},
  title     = {Safety of subjects during radiofrequency exposure in ultra-high-field magnetic resonance imaging},
  series = {IEEE Letters on Electromagnetic Compatibility Practice and Applications},
  volume    = {2},
  journal   = {IEEE Letters on Electromagnetic Compatibility Practice and Applications},
  number    = {3},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {2637-6423},
  doi       = {10.1109/LEMCPA.2020.3029747},
  pages     = {1 -- 8},
  year      = {2020},
  abstract  = {Magnetic resonance imaging (MRI) is one of the most important medical imaging techniques. Since the introduction of MRI in the mid-1980s, there has been a continuous trend toward higher static magnetic fields to obtain i.a. a higher signal-to-noise ratio. The step toward ultra-high-field (UHF) MRI at 7 Tesla and higher, however, creates several challenges regarding the homogeneity of the spin excitation RF transmit field and the RF exposure of the subject. In UHF MRI systems, the wavelength of the RF field is in the range of the diameter of the human body, which can result in inhomogeneous spin excitation and local SAR hotspots. To optimize the homogeneity in a region of interest, UHF MRI systems use parallel transmit systems with multiple transmit antennas and time-dependent modulation of the RF signal in the individual transmit channels. Furthermore, SAR increases with increasing field strength, while the SAR limits remain unchanged. Two different approaches to generate the RF transmit field in UHF systems using antenna arrays close and remote to the body are investigated in this letter. Achievable imaging performance is evaluated compared to typical clinical RF transmit systems at lower field strength. The evaluation has been performed under consideration of RF exposure based on local SAR and tissue temperature. Furthermore, results for thermal dose as an alternative RF exposure metric are presented.},
  language  = {en}
}
@article{BlomeMashhoon1984,
  author    = {Blome, Hans-Joachim and Mashhoon, Bahram},
  title     = {Quasi-normal oscillations of a Schwarzschild black hole},
  series = {Physics Letters A. 100 (1984), H. 5},
  journal   = {Physics Letters A. 100 (1984), H. 5},
  isbn      = {0375-9601},
  pages     = {231 -- 234},
  year      = {1984},
  language  = {en}
}
@article{MaiwaldDachwald2010,
  author    = {Maiwald, Volker and Dachwald, Bernd},
  title     = {Mission design for a multiple-rendezvous mission to Jupiter's trojans},
  pages     = {3},
  year      = {2010},
  abstract  = {In this paper, we will provide a feasible mission design for a multiple-rendezvous mission to Jupiter's Trojans. It is based on solar electric propulsion, as being currently used on the DAWN spacecraft, and other flight-proven technology. First, we have selected a set of mission objectives, the prime objective being the detection of water -especially subsurface water -to provide evidence for the Trojans' formation at large solar distances. Based on DAWN and other comparable missions, we have determined suitable payload instruments to achieve these objectives. Afterwards, we have designed a spacecraft that is able to carry the selected payload to the Trojan region and rendezvous successively with three target bodies within a maximum mission duration of 15 years. Accurate low-thrust trajectories have been obtained with a global low-thrust trajectory optimization program (InTrance). During the transfer from Earth to the first target, the spacecraft is propelled by two RIT-22 ion engines from EADS Astrium, whereas a single RIT-15 is used for transfers within the Trojan region to reduce the required power. For power generation, the spacecraft uses a multi-junction solar array that is supported by concentrators. To achieve moderate mission costs, we have restricted the launch mass to a maximum of 1600 kg, the maximum interplanetary injection capability of a Soyuz/Fregat launcher. Our final layout has a mass of 1400 kg, yielding a margin of about 14\%. Nestor (a member of the L4-population) was determined as the first mission target. It can be reached within 4.6 years from launch. The fuel mass ratio for this transfer is about 35\%. The stay time at Nestor is 1.2 years. Eurymedon was selected as the second target (transfer time 3.5 years, stay time 3.0 years) and Irus as the third target (transfer time 2.2 years). The transfers within the Trojan L4-population can be accomplished with fuel mass ratios of about 3\% for each trajectory leg. Including the stay times in orbit around the targets, the mission can be accomplished within a total duration of about 14.5 years. According to our mission analysis, it is also feasible to fly to the L5-population with similar flight times. It has to be noted that -for a first analysis -we have taken only the named targets into account. Allowing also rendezvous with unnamed objects will very likely decrease the mission duration. Based on a scaling of DAWN's mission costs (due to comparable scientific instruments and mission objectives), and taking into account the longer mission duration and the potential re-use of already developed technology, we have estimated that these three rendezvous can be accomplished with a budget of about 250 Million Euros, i.e. about 25\% of ROSETTA's budget.},
  language  = {en}
}
@article{RhodenBallGrajewskietal.2023,
  author    = {Rhoden, Imke and Ball, Christopher Stephen and Grajewski, Matthias and Kuckshinrich, Wilhelm},
  title     = {Reverse engineering of stakeholder preferences - A multi-criteria assessment of the German passenger car sector},
  series = {Renewable and Sustainable Energy Reviews},
  volume    = {181},
  journal   = {Renewable and Sustainable Energy Reviews},
  number    = {July 2023},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1364-0321},
  doi       = {10.1016/j.rser.2023.113352},
  pages     = {Article number: 113352},
  year      = {2023},
  abstract  = {Germany is a frontrunner in setting frameworks for the transition to a low-carbon system. The mobility sector plays a significant role in this shift, affecting different people and groups on multiple levels. Without acceptance from these stakeholders, emission targets are out of reach. This research analyzes how the heterogeneous preferences of various stakeholders align with the transformation of the mobility sector, looking at the extent to which the German transformation paths are supported and where stakeholders are located. Under the research objective of comparing stakeholders' preferences to identify which car segments require additional support for a successful climate transition, a status quo of stakeholders and car performance criteria is the foundation for the analysis. Stakeholders' hidden preferences hinder the derivation of criteria weightings from stakeholders; therefore, a ranking from observed preferences is used. This study's inverse multi-criteria decision analysis means that weightings can be predicted and used together with a recalibrated performance matrix to explore future preferences toward car segments. Results show that stakeholders prefer medium-sized cars, with the trend pointing towards the increased potential for alternative propulsion technologies and electrified vehicles. These insights can guide the improved targeting of policy supporting the energy and mobility transformation. Additionally, the method proposed in this work can fully handle subjective approaches while incorporating a priori information. A software implementation of the proposed method completes this work and is made publicly available.},
  language  = {en}
}
@article{VoegeleJosyabhatlaBalletal.2023,
  author    = {V{\"o}gele, Stefan and Josyabhatla, Vishnu Teja and Ball, Christopher Stephen and Rhoden, Imke and Grajewski, Matthias and R{\"u}bbelke, Dirk and Kuckshinrichs, Wilhelm},
  title     = {Robust assessment of energy scenarios from stakeholders' perspectives},
  series = {Energy},
  journal   = {Energy},
  number    = {In Press, Article 128326},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-6785 (Online)},
  doi       = {10.1016/j.energy.2023.128326},
  year      = {2023},
  abstract  = {Using scenarios is vital in identifying and specifying measures for successfully transforming the energy system. Such transformations can be particularly challenging and require the support of a broader set of stakeholders. Otherwise, there will be opposition in the form of reluctance to adopt the necessary technologies. Usually, processes for considering stakeholders' perspectives are very time-consuming and costly. In particular, there are uncertainties about how to deal with modifications in the scenarios. In principle, new consulting processes will be required. In our study, we show how multi-criteria decision analysis can be used to analyze stakeholders' attitudes toward transition paths. Since stakeholders differ regarding their preferences and time horizons, we employ a multi-criteria decision analysis approach to identify which stakeholders will support or oppose a transition path. We provide a flexible template for analyzing stakeholder preferences toward transition paths. This flexibility comes from the fact that our multi-criteria decision aid-based approach does not involve intensive empirical work with stakeholders. Instead, it involves subjecting assumptions to robustness analysis, which can help identify options to influence stakeholders' attitudes toward transitions.},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {132},
  journal   = {Journal of solar energy engineering},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {0199-6231},
  doi       = {10.1115/1.4000332},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {The cost of solar tower power plants is dominated by the heliostat field making up roughly 50\% of investment costs. Classical heliostat design is dominated by mirrors brought into position by steel structures and drives that guarantee high accuracies under wind loads and thermal stress situations. A large fraction of costs is caused by the stiffness requirements of the steel structure, typically resulting in ~ 20 kg/m² steel per mirror area. The typical cost figure of heliostats (figure mentioned by Solucar at Solar Paces Conference, Seville, 2006) is currently in the area of 150 €/m² caused by the increasing price of the necessary raw materials. An interesting option to reduce costs lies in a heliostat design where all moving parts are protected from wind loads. In this way, drives and mechanical layout may be kept less robust, thereby reducing material input and costs. In order to keep the heliostat at an appropriate size, small mirrors (around 10x10 cm²) have to be used, which are placed in a box with a transparent cover. Innovative drive systems are developed in order to obtain a cost-effective design. A 0,5x0,5 m² demonstration unit will be constructed. Tests of the unit are carried out with a high-precision artificial sun unit that imitates the sun's path with an accuracy of less than 0.5 mrad and creates a beam of parallel light with a divergence of less than 4 mrad.},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Tran, L. and Vonderstein, K. and Keschenau, P. and Linde, T. and Steinseifer, U. and Behr, M. and Mottaghy, K.},
  title     = {The influence of high shear on thrombosis and hemolysis in artificial organs},
  series = {The International Journal of Artificial Organs},
  volume    = {33},
  journal   = {The International Journal of Artificial Organs},
  number    = {7},
  publisher = {Sage},
  address   = {Thousand Oaks},
  issn      = {0391-3988},
  pages     = {426 -- 426},
  year      = {2010},
  language  = {en}
}
@article{BallVoegeleGrajewskietal.2021,
  author    = {Ball, Christopher Stephen and V{\"o}gele, Stefan and Grajewski, Matthias and Kuckshinrichs, Wilhelm},
  title     = {E-mobility from a multi-actor point of view: Uncertainties and their impacts},
  series = {Technological Forecasting and Social Change},
  volume    = {170},
  journal   = {Technological Forecasting and Social Change},
  number    = {Art. 120925},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0040-1625},
  doi       = {10.1016/j.techfore.2021.120925},
  year      = {2021},
  language  = {en}
}
@article{BoernerFunkeHendricketal.2010,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {Control system modifications for a hydrogen fuelled gas-turbine},
  series = {Proceedings of ISROMAC 13},
  journal   = {Proceedings of ISROMAC 13},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-617-38848-4},
  pages     = {665 -- 670},
  year      = {2010},
  language  = {en}
}
@article{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test facility for absorber specimens of solar tower power plants},
  series = {Advances in Science and Technology},
  volume    = {74},
  journal   = {Advances in Science and Technology},
  publisher = {Trans Tech Publications},
  address   = {Baech},
  doi       = {10.4028/www.scientific.net/AST.74.266},
  pages     = {266 -- 271},
  year      = {2010},
  abstract  = {The Solar-Institute J{\"u}lich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of J{\"u}lich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.},
  language  = {en}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes Mattheus},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@article{MiyamotoKanekoMatsuoetal.2010,
  author    = {Miyamoto, Ko-ichiro and Kaneko, Kazumi and Matsuo, Akira and Wagner, Torsten and Kanoh, Shin`ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Miniaturized chemical imaging sensor system using an OLED display panel},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.160},
  pages     = {516 -- 519},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the currentvoltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.},
  language  = {en}
}
@article{SrivastavaSinghAggarwaletal.2010,
  author    = {Srivastava, Alok and Singh, Virendra and Aggarwal, Pranav and Schneeweiss, F. and Scherer, Ulrich W. and Friedrich, W.},
  title     = {Optical studies of insulating polymers for radiation dose monitoring},
  series = {Indian Journal of Pure and Applied Physics},
  volume    = {48},
  journal   = {Indian Journal of Pure and Applied Physics},
  number    = {11},
  publisher = {Council Of Scientific And Industrial Research (CSIR), National Institute Of Science Communication and Policy Research (NIScPR)},
  address   = {New Delhi},
  isbn      = {0019-5596},
  pages     = {782 -- 786},
  year      = {2010},
  abstract  = {The optical study carried out on insulating polymers namely polyethyleneterephthalate (PET) and polyvinylchloride (PVC) has been described. The polymers are exposed to different radiation doses by exposing them to swift heavy ions of carbon (90 MeV), silicon (120 MeV) and nickel (100 MeV) which influence on their optical properties. The studies show that amongst the investigated polymers, PVC and PET have potential for application as dosimeter beyond a threshold dose which is strongly dependent on the nature of the material and the radiation type. The optical micrographs show a distinct change in colour of the sample with increase in radiation dose.},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5 B},
  journal   = {Physics Procedia},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2010.08.082},
  pages     = {543 -- 549},
  year      = {2010},
  abstract  = {Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.},
  language  = {en}
}
@article{KirchnerOberlaenderFriedrichetal.2010,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Friedrich, Peter and Rysstad, Gunnar and Berger, J{\"o}rg and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.098},
  pages     = {264 -- 267},
  year      = {2010},
  abstract  = {A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(\%v/v) in a H2O2 concentration range of 0 to 10\% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.},
  language  = {en}
}
@article{WagnerMiyamotoSchoeningetal.2010,
  author    = {Wagner, Torsten and Miyamoto, Ko-ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel combination of digital light processing (DLP) and light-addressable potentiometric sensors (LAPS) for flexible chemical imaging},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.161},
  pages     = {520 -- 523},
  year      = {2010},
  abstract  = {Chemical imaging systems allow the visualisation of the distribution of chemical species on the sensor surface. This work represents a new flexible approach of read out in a light-addressable potentiometric sensor (LAPS) with the help of a digital light processing (DLP) set-up. The DLP, known well for video projectors, consists of a mirror-array MEMS device which allows fast and flexible generation of light patterns. With the help of these light patterns the sensor surface of the LAPS device can be read out sequentially in a raster like scheme (scanning LAPS). The DLP approach has several advantages compared to conventional scanning LAPS set-ups, e.g., the spot size, the shape and the intensity of the light pointer can be changed easily and no mechanical movement is necessary, which reduces the size of the set-up and increases the stability and speed of measurement.},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2010,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef},
  title     = {Real-time detection of CO by eukaryotic cells},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  pages     = {17 -- 20},
  year      = {2010},
  abstract  = {In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.},
  language  = {en}
}
@article{SponagelBaroudFalketal.2004,
  author    = {Sponagel, Stefan and Baroud, Gamal and Falk, R. and Crookshank, M.},
  title     = {Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration. G. Baroud, R. Falk, M. Crookshank, S. Sponagel, T. Steffen},
  series = {Journal of Biomechanics. 37 (2004), H. 2},
  journal   = {Journal of Biomechanics. 37 (2004), H. 2},
  isbn      = {0021-9290},
  pages     = {189 -- 196},
  year      = {2004},
  language  = {en}
}