@book{SchmidtMuellerStoecker1999,
  author    = {Schmidt, Ludwig and M{\"u}ller, Thomas and St{\"o}cker, Ernst E.},
  title     = {Die Organschaft im K{\"o}rperschaftsteuer-, Gewerbesteuer- und Umsatzsteuerrecht},
  edition   = {5. Aufl.},
  publisher = {Verl. Neue Wirtschafts-Briefe},
  address   = {Herne},
  isbn      = {3-482-44605-9},
  pages     = {423 S.},
  year      = {1999},
  language  = {de}
}
@book{SchmidtMuellerStoecker2003,
  author    = {Schmidt, Ludwig and M{\"u}ller, Thomas and St{\"o}cker, Ernst E.},
  title     = {Die Organschaft im K{\"o}rperschaftsteuer-, Gewerbesteuer- und Umsatzsteuerrecht},
  edition   = {6. Aufl.},
  publisher = {Verl. Neue Wirtschafts-Briefe},
  address   = {Herne},
  isbn      = {3-482-44606-7},
  pages     = {429 S.},
  year      = {2003},
  language  = {de}
}
@article{SchmidtTonnesmannFoersteretal.2000,
  author    = {Schmidt, R. and Tonnesmann, A. and F{\"o}rster, Arnold and Grimm, M. and Kordos, P. and L{\"u}th, H.},
  title     = {Metamorphic InAlAs/InGaAs HEMT's on GaAs substrates using an InP buffer layer},
  series = {8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications : EDMO 2000 ; [13 - 14 November 2000, University of Glasgow] / organised by Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow Scotland. MTT/ED/AP/LEO Societies Joint Chapter, United Kingdom and Republic of Ireland Section. With technical co-sponsorship from IEEE Electron Device Society},
  journal   = {8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications : EDMO 2000 ; [13 - 14 November 2000, University of Glasgow] / organised by Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow Scotland. MTT/ED/AP/LEO Societies Joint Chapter, United Kingdom and Republic of Ireland Section. With technical co-sponsorship from IEEE Electron Device Society},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-6550-X},
  pages     = {95 -- 98},
  year      = {2000},
  language  = {en}
}
@article{SchmidtHebel2009,
  author    = {Schmidt, Rolf and Hebel, Christoph},
  title     = {Makroskopische Verkehrssimulationsmodelle in der kommunalen Planungspraxis},
  series = {Stadt Region Land (2009)},
  journal   = {Stadt Region Land (2009)},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  isbn      = {0344-9645},
  pages     = {63 -- 72},
  year      = {2009},
  language  = {de}
}
@misc{SchmidtJelinekBiselli1999,
  author    = {Schmidt, Sebastian and Jelinek, Nanni and Biselli, Manfred},
  title     = {Verfahren zur Durchf{\"u}hrung von chemischen oder biologischen Reaktionen},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {de}
}
@inproceedings{SchmidtKaschEichleretal.2021,
  author    = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura},
  title     = {Process strategies on laser-based melting of glass powder},
  series = {LiM 2021 proceedings},
  booktitle = {LiM 2021 proceedings},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.},
  language  = {en}
}
@inproceedings{SchmidtsBoltesKraftetal.2017,
  author    = {Schmidts, Oliver and Boltes, Maik and Kraft, Bodo and Schreiber, Marc},
  title     = {Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers},
  series = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  booktitle = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  pages     = {1 -- 4},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchmidtsKraftSchreiberetal.2018,
  author    = {Schmidts, Oliver and Kraft, Bodo and Schreiber, Marc and Z{\"u}ndorf, Albert},
  title     = {Continuously evaluated research projects in collaborative decoupled environments},
  series = {2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER\&IP' 18},
  booktitle = {2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER\&IP' 18},
  publisher = {ACM},
  address   = {New York, NY},
  pages     = {1 -- 9},
  year      = {2018},
  abstract  = {Often, research results from collaboration projects are not transferred into productive environments even though approaches are proven to work in demonstration prototypes. These demonstration prototypes are usually too fragile and error-prone to be transferred easily into productive environments. A lot of additional work is required. Inspired by the idea of an incremental delivery process, we introduce an architecture pattern, which combines the approach of Metrics Driven Research Collaboration with microservices for the ease of integration. It enables keeping track of project goals over the course of the collaboration while every party may focus on their expert skills: researchers may focus on complex algorithms, practitioners may focus on their business goals. Through the simplified integration (intermediate) research results can be introduced into a productive environment which enables getting an early user feedback and allows for the early evaluation of different approaches. The practitioners' business model benefits throughout the full project duration.},
  language  = {en}
}
@inproceedings{SchmidtsKraftSiebigterothetal.2019,
  author    = {Schmidts, Oliver and Kraft, Bodo and Siebigteroth, Ines and Z{\"u}ndorf, Albert},
  title     = {Schema Matching with Frequent Changes on Semi-Structured Input Files: A Machine Learning Approach on Biological Product Data},
  series = {Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS},
  booktitle = {Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS},
  isbn      = {978-989-758-372-8},
  doi       = {10.5220/0007723602080215},
  pages     = {208 -- 215},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2020,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of low-quality product data by attribute label ranking},
  series = {Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1},
  booktitle = {Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1},
  publisher = {SciTePress},
  address   = {Set{\´u}bal, Portugal},
  isbn      = {978-989-758-440-4},
  doi       = {10.5220/0009831000900101},
  pages     = {90 -- 101},
  year      = {2020},
  abstract  = {The integration of product data from heterogeneous sources and manufacturers into a single catalog is often still a laborious, manual task. Especially small- and medium-sized enterprises face the challenge of timely integrating the data their business relies on to have an up-to-date product catalog, due to format specifications, low quality of data and the requirement of expert knowledge. Additionally, modern approaches to simplify catalog integration demand experience in machine learning, word vectorization, or semantic similarity that such enterprises do not have. Furthermore, most approaches struggle with low-quality data. We propose Attribute Label Ranking (ALR), an easy to understand and simple to adapt learning approach. ALR leverages a model trained on real-world integration data to identify the best possible schema mapping of previously unknown, proprietary, tabular format into a standardized catalog schema. Our approach predicts multiple labels for every attribute of an inpu t column. The whole column is taken into consideration to rank among these labels. We evaluate ALR regarding the correctness of predictions and compare the results on real-world data to state-of-the-art approaches. Additionally, we report findings during experiments and limitations of our approach.},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2021,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of heterogeneous and volatile product data},
  series = {DATA 2020: Data Management Technologies and Applications},
  booktitle = {DATA 2020: Data Management Technologies and Applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-83013-7},
  doi       = {10.1007/978-3-030-83014-4_7},
  pages     = {134 -- 153},
  year      = {2021},
  abstract  = {The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.},
  language  = {en}
}
@inproceedings{SchmiegelKochDittmeretal.2010,
  author    = {Schmiegel, A. and Koch, K. and Dittmer, M. and Braun, M. and Landau, M. and Dick, C. and Bragard, Michael and B{\"u}cenbender, K. and De Doncker, R.W.},
  title     = {Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom},
  series = {Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. M{\"a}rz 2010, Kloster Banz, Bad Staffelstein. - (Wissen f{\"u}r Profis)},
  booktitle = {Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. M{\"a}rz 2010, Kloster Banz, Bad Staffelstein. - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Ostbayerisches Technologie-Transfer-Inst.},
  address   = {Regensburg},
  isbn      = {978-3-941785-23-6},
  pages     = {354 -- 359},
  year      = {2010},
  language  = {de}
}
@article{SchmittFassbenderLuethetal.1999,
  author    = {Schmitt, G. and Faßbender, F. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef and Buss, G. and Kranzmann, A. and Gramberg, U.},
  title     = {Korrosionsschutzwirkung von Passivierungsschichten am Beispiel eines Mikroelektrodenarrays},
  series = {Werkstoffe f{\"u}r die Energietechnik / Symposium 3},
  journal   = {Werkstoffe f{\"u}r die Energietechnik / Symposium 3},
  publisher = {Wiley-VCH},
  address   = {Weinheim [u.a.]},
  isbn      = {3-527-29940-8},
  pages     = {345 -- 350},
  year      = {1999},
  language  = {de}
}
@article{SchmittFassbenderLuethetal.2000,
  author    = {Schmitt, G. and Faßbender, F. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef and Schultze, J. W. and Buß, G.},
  title     = {Passivation and corrosion of microelectrode arrays},
  series = {Materials and Corrosion. 51 (2000), H. 1},
  journal   = {Materials and Corrosion. 51 (2000), H. 1},
  isbn      = {0947-5117},
  pages     = {20 -- 25},
  year      = {2000},
  language  = {en}
}
@article{SchmittSchultzeFassbenderetal.1999,
  author    = {Schmitt, G. and Schultze, J.-W. and Faßbender, F. and Buß, G. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Passivation and corrosion of microelectrode arrays},
  series = {Electrochimica Acta. 44 (1999), H. 21-22},
  journal   = {Electrochimica Acta. 44 (1999), H. 21-22},
  isbn      = {0013-4686},
  pages     = {3865 -- 3883},
  year      = {1999},
  language  = {en}
}
@article{SchmittWernerSchoening2002,
  author    = {Schmitt, G. and Werner, C. and Sch{\"o}ning, Michael Josef},
  title     = {Microelectrochemical efficiency evaluation of inhibitors for CO2 corrosion of carbon steel under high shear stress gradients},
  series = {Corrosion 2002. Conference Proceedings. NACExpo, 57th Annual Conference and Exhibition, Denver, US, Apr 7-11, 2002},
  journal   = {Corrosion 2002. Conference Proceedings. NACExpo, 57th Annual Conference and Exhibition, Denver, US, Apr 7-11, 2002},
  publisher = {NACE International},
  address   = {Houston, Texas},
  pages     = {1 -- 11},
  year      = {2002},
  language  = {en}
}
@article{SchmittSchollCaietal.2010,
  author    = {Schmitt, Robert and Scholl, Ingrid and Cai, Yu and Xia, Ji and Dziwoki, Paul and Harding, Martin and Pavim, Alberto},
  title     = {Machine vision system for inline inspection in carbide insert production},
  series = {Proceedings of the 36th International MATADOR Conference},
  journal   = {Proceedings of the 36th International MATADOR Conference},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-1-84996-431-9},
  doi       = {10.1007/978-1-84996-432-6_77},
  pages     = {339 -- 342},
  year      = {2010},
  abstract  = {In steps of the production chain of carbide inserts, such as unloading or packaging, the conformity test of the insert type is done manually, which causes a statistic increase of errors due to monotony and fatigue of the worker and the wide variety of the insert types. A machine vision system is introduced that captures digital frames of the inserts in the production line, analyses inspects automatically and measures four quality features: coating colour, edge radius, plate shape and chip-former geometry. This new method has been tested on several inserts of different types and has shown that the prevalent insert types can be inspected and robustly classified in real production environment and therefore improves the manufacturing automation.},
  language  = {en}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Werkstoffe - Oberfl{\"a}chen - Schmierstoffe - Tribologie-Fachtagung 2004 in G{\"o}ttingen},
  series = {Erd{\"o}l Erdgas Kohle. 121 (2005), H. 1},
  journal   = {Erd{\"o}l Erdgas Kohle. 121 (2005), H. 1},
  isbn      = {0179-3187},
  pages     = {39 -- 40},
  year      = {2005},
  language  = {de}
}
@article{Schmitt2005,
  author    = {Schmitt, Rolf W.},
  title     = {Innovationen bei Schmierstoffen und tribologischen Systemen},
  series = {Stahl und Eisen. 125 (2005), H. 3},
  journal   = {Stahl und Eisen. 125 (2005), H. 3},
  isbn      = {0340-4803},
  pages     = {51 -- 53},
  year      = {2005},
  language  = {de}
}
@article{SchmittBlankSchoenbrunn1983,
  author    = {Schmitt, Rolf W. and Blank, K. and Schoenbrunn, G.},
  title     = {Experimentelle Spannungsanalyse zum Doppelringverfahren},
  series = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  journal   = {Sprechsaal : internat. ceramics \& glass magazine. 116 (1983), H. 5},
  isbn      = {0341-0439},
  pages     = {397 -- 405},
  year      = {1983},
  language  = {de}
}
@inproceedings{SchmittButenweg2015,
  author    = {Schmitt, T. and Butenweg, Christoph},
  title     = {Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme - Parameterstudie},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {199 -- 206},
  year      = {2015},
  language  = {de}
}
@inproceedings{SchmittRosinButenweg2018,
  author    = {Schmitt, Timo and Rosin, Julia and Butenweg, Christoph},
  title     = {Seismic Impact And Design Of Buried Pipelines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  abstract  = {Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.},
  language  = {en}
}
@inproceedings{SchmitzApandiSpillneretal.2024,
  author    = {Schmitz, Annika and Apandi, Shah Eiman Amzar Shah and Spillner, Jan and Hima, Flutura and Behbahani, Mehdi},
  title     = {Effect of different cannula positions in the pulmonary artery on blood flow and gas exchange using computational fluid dynamics analysis},
  series = {YRA MedTech Symposium (2024)},
  booktitle = {YRA MedTech Symposium (2024)},
  editor    = {Digel, Ilya and Staat, Manfred and Trzewik, J{\"u}rgen and Sielemann, Stefanie and Erni, Daniel and Zylka, Waldemar},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-65-3},
  doi       = {10.17185/duepublico/81475},
  pages     = {29 -- 30},
  year      = {2024},
  abstract  = {Pulmonary arterial cannulation is a common and effective method for percutaneous mechanical circulatory support for concurrent right heart and respiratory failure [1]. However, limited data exists to what effect the positioning of the cannula has on the oxygen perfusion throughout the pulmonary artery (PA). This study aims to evaluate, using computational fluid dynamics (CFD), the effect of different cannula positions in the PA with respect to the oxygenation of the different branching vessels in order for an optimal cannula position to be determined. The four chosen different positions (see Fig. 1) of the cannulas are, in the lower part of the main pulmonary artery (MPA), in the MPA at the junction between the right pulmonary artery (RPA) and the left pulmonary artery (LPA), in the RPA at the first branch of the RPA and in the LPA at the first branch of the LPA.},
  language  = {en}
}
@book{Schmitz2003,
  author    = {Schmitz, G{\"u}nter},
  title     = {Mechatronik im Automobil II : aktuelle Trends in der Systementwicklung f{\"u}r Automobile / G{\"u}nter Schmitz (Hrsg.)},
  publisher = {Expert-Verl},
  address   = {Renningen},
  isbn      = {3-8169-2139-6},
  pages     = {383 S : Ill., graph. Darst.},
  year      = {2003},
  language  = {de}
}
@book{Schmitz1999,
  author    = {Schmitz, G{\"u}nter},
  title     = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Demel, Werner ... (Hrsg.)},
  publisher = {Heinz-Nixdorf-Institut},
  address   = {Paderborn},
  pages     = {145 S. : Ill., graph. Darst.},
  year      = {1999},
  language  = {de}
}
@article{Schmitz2004,
  author    = {Schmitz, G{\"u}nter},
  title     = {Mechatronic Systems Simulation as an obligatory module for Mechatronic Master Students},
  series = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  journal   = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [IEEE Industrial Electronics Society ...] P. Drews (ed.)},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-50-X},
  pages     = {1278},
  year      = {2004},
  language  = {en}
}
@book{Schmitz2000,
  author    = {Schmitz, G{\"u}nter},
  title     = {Mechatronik im Automobil I: aktuelle Trends in der Systementwicklung f{\"u}r Automobile / G{\"u}nter Schmitz (Hrsg.)},
  publisher = {Expert-Verl.},
  address   = {Renningen},
  isbn      = {3-8169-1839-5},
  pages     = {227 S. : zahlr. Ill. und graph. Darst.},
  year      = {2000},
  language  = {de}
}
@book{Schmitz1985,
  author    = {Schmitz, G{\"u}nter},
  title     = {Nichtreziproke optische Bauelemente mit k{\"u}nstlich anisotropen Filmwellenleitern},
  address   = {Aachen},
  pages     = {116 S. : Ill., zahlr. graph. Darst.},
  year      = {1985},
  language  = {de}
}
@book{Schmitz2012,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektronik im Kraftfahrzeug : Innovationen bei System und Komponenten ; mit 7 Tabellen / Hrsg.: Schmitz, G{\"u}nter},
  publisher = {expert-Verl.},
  address   = {Renningen},
  isbn      = {978-3-8169-3110-2},
  pages     = {185 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@book{Schmitz2011,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektrotechnik : Grundlagen der Elektrotechnik f{\"u}r Ingenieur-Studenten},
  publisher = {Ventus Publ.},
  address   = {Frederiksberg},
  isbn      = {978-87-7681-786-2},
  pages     = {142 S. Ill., graph. Darst},
  year      = {2011},
  language  = {de}
}
@book{Schmitz2011,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektronik : Grundlagen der Elektronik f{\"u}r Ingenieurstudenten},
  publisher = {Ventus Publ.},
  address   = {Frederiksberg},
  isbn      = {978-87-7681-832-6},
  pages     = {164 S. : Ill., graph. Darst.},
  year      = {2011},
  language  = {de}
}
@book{Schmitz2013,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektrotechnik f{\"u}r Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Hauptbd.: Gleichspannungstechnik, Wechselspannungstechnik, Elektrische Maschinen},
  publisher = {Schmitz},
  address   = {Aachen},
  isbn      = {978-1-481830-60-7},
  pages     = {150 S. : Ill., graph. Darst.},
  year      = {2013},
  language  = {de}
}
@book{Schmitz2013,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektrotechnik f{\"u}r Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Aufgabensammlung, [{\"U}bungs- und Klausuraufgaben]},
  publisher = {Schmitz},
  address   = {Aachen},
  isbn      = {978-1-482721-47-8},
  pages     = {140 S. : graph. Darst.},
  year      = {2013},
  language  = {de}
}
@article{SchmitzAltherrHofmannetal.1998,
  author    = {Schmitz, G{\"u}nter and Altherr, M. and Hofmann, O. and Pischinger, M. (u.a.)},
  title     = {Anwendung moderner Simulationstools f{\"u}r die Entwicklung eines elektromagnetischen Ventilaktuators},
  series = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Aachener Workshop TransMechatronik 26. Mai 1998, Technologiezentrum am Europaplatz},
  journal   = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Aachener Workshop TransMechatronik 26. Mai 1998, Technologiezentrum am Europaplatz},
  publisher = {Heinz-Nixdorf-Inst, Univ.-GH Paderborn},
  address   = {Paderborn},
  isbn      = {3-931466-37-X},
  pages     = {55 -- 74},
  year      = {1998},
  language  = {de}
}
@article{SchmitzBartzBoehnke1992,
  author    = {Schmitz, G{\"u}nter and Bartz, R. and B{\"o}hnke, P.},
  title     = {Neue Methoden zur Erkennung des ottomotorischen Klopfens},
  series = {Motortechnische Zeitschrift : MTZ. 53 (1992), H. 6},
  journal   = {Motortechnische Zeitschrift : MTZ. 53 (1992), H. 6},
  isbn      = {0024-8525},
  pages     = {286 -- 293},
  year      = {1992},
  language  = {de}
}
@article{SchmitzBartzHansen1991,
  author    = {Schmitz, G{\"u}nter and Bartz, R. and Hansen, W.},
  title     = {Flexibles elektronisches Verbrennungsmotoren-Indiziersystem (FEVIS)},
  series = {Vortr{\"a}ge und Kurzreferate : 13. und 14. November 1990, Congress Centrum, Magdeburg / Technische Universit{\"a}t "Otto von Guericke" Magdeburg, Fakult{\"a}t f{\"u}r Thermischen Maschinenbau, Institut f{\"u}r Maschinenmeßtechnik, Kolbenmaschinen und Instandhaltung},
  journal   = {Vortr{\"a}ge und Kurzreferate : 13. und 14. November 1990, Congress Centrum, Magdeburg / Technische Universit{\"a}t "Otto von Guericke" Magdeburg, Fakult{\"a}t f{\"u}r Thermischen Maschinenbau, Institut f{\"u}r Maschinenmeßtechnik, Kolbenmaschinen und Instandhaltung},
  address   = {Magdeburg},
  pages     = {485 -- 491},
  year      = {1991},
  language  = {de}
}
@article{SchmitzBartzHilgeretal.1990,
  author    = {Schmitz, G{\"u}nter and Bartz, R. and Hilger, U. and Siedentop, M.},
  title     = {Intelligent Alcohol Fuel Sensor},
  year      = {1990},
  language  = {en}
}
@article{SchmitzDamannSchmit1984,
  author    = {Schmitz, G{\"u}nter and Damann, H. and Schmit, H. J.},
  title     = {Design and Analysis of a Waveguide Isolator with a Form-Birefringent Top Layer},
  series = {ECOC '84 : Conference proceedings ; 10th European Conference on Optical Communication, September 3 - 6, 1984 Liederhalle Stuttgart, Federal Republic of Germany / Organized by Nachrichtentechn. Ges. im VDE (NTG).},
  journal   = {ECOC '84 : Conference proceedings ; 10th European Conference on Optical Communication, September 3 - 6, 1984 Liederhalle Stuttgart, Federal Republic of Germany / Organized by Nachrichtentechn. Ges. im VDE (NTG).},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {3-8007-1383-7},
  pages     = {42},
  year      = {1984},
  language  = {en}
}
@article{SchmitzOligschlaegerEifleretal.1994,
  author    = {Schmitz, G{\"u}nter and Oligschl{\"a}ger, U. and Eifler, G. and Lechner, H.},
  title     = {Automated System for Optimized Calibration of Engine Management Systems},
  year      = {1994},
  language  = {en}
}
@article{SchmitzPischinger1997,
  author    = {Schmitz, G{\"u}nter and Pischinger, M.},
  title     = {Mechatronische Simulation eines EMV- Aktuators},
  series = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  journal   = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Paderborner Workshop TransMechatronik, 24. Juni 1997, Heinz-Nixdorf-MuseumsForum. [Hrsg. J{\"u}rgen Gausemeier]},
  publisher = {Heinz-Nixdorf-Inst., Univ.-GH Paderborn},
  address   = {Paderborn},
  isbn      = {3-931466-22-1},
  pages     = {69 -- 83},
  year      = {1997},
  language  = {de}
}
@article{SchmitzRoetertPischinger1988,
  author    = {Schmitz, G{\"u}nter and Roetert, J. and Pischinger, M.},
  title     = {A Fast Intelligent VMEbus System for Combustion Analysis in Engines},
  series = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  journal   = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  publisher = {Automotive Automation Ltd},
  address   = {Croydon},
  isbn      = {0947719229},
  pages     = {381 -- 391},
  year      = {1988},
  language  = {en}
}
@misc{SchmitzSchebitzEsch1997,
  author    = {Schmitz, G{\"u}nter and Schebitz, Michael and Esch, Thomas},
  title     = {Aus der Ruhelage selbstanziehender elektromagnetischer Aktuator},
  year      = {1997},
  abstract  = {Elektromagnetischer Aktuator zur Bet{\"a}tigung eines Stellgliedes (2), mit wenigstens einem Elektromagneten (4) und einem mit dem Stellglied (2) verbundenen Anker (3), der gegen die Kraft einer R{\"u}ckstellfeder (6) aus seiner Ruhelage in Richtung auf den Elektromagneten (4) bewegbar ist, mit einer R{\"u}ckstellfeder (6), die eine nicht lineare, bezogen auf die Ruhelage des Ankers (3) progressiv ansteigende Kennlinie aufweist.},
  language  = {de}
}
@article{SchmitzSchmitt1984,
  author    = {Schmitz, G{\"u}nter and Schmitt, H. J.},
  title     = {Anisotrope Filmwellenleiter f{\"u}r nichtreziproke optische Bauelemente},
  series = {URSI: Kleinheubacher Tagung am 3.10.83 / Hrsg.: Deutsche Telekom AG},
  journal   = {URSI: Kleinheubacher Tagung am 3.10.83 / Hrsg.: Deutsche Telekom AG},
  address   = {Darmstadt},
  isbn      = {0343-5725},
  pages     = {51},
  year      = {1984},
  language  = {de}
}
@article{SchmitzSchmittDammann1985,
  author    = {Schmitz, G{\"u}nter and Schmitt, H.J. and Dammann, H.},
  title     = {Weakly Guiding Semileaky Isolator with a Form-Birefringent Top Layer},
  series = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)},
  journal   = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)},
  publisher = {Optical Society of America},
  address   = {Washington, DC},
  pages     = {260},
  year      = {1985},
  language  = {en}
}
@article{SchmitzSpicherKollmeier1988,
  author    = {Schmitz, G{\"u}nter and Spicher, U. and Kollmeier, H.P.},
  title     = {Application of a New Optical-Fiber Technique for Flame Propagation Diagnostics in IC Engines},
  year      = {1988},
  language  = {en}
}
@article{SchmitzVomHemdtBreitschuhetal.2002,
  author    = {Schmitz, G{\"u}nter and Vom Hemdt, A. and Breitschuh, S. and Graber, S.},
  title     = {Virtuelle Praktika f{\"u}r die Ingenieurausbildung},
  series = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher},
  journal   = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {3-8007-2723-4},
  pages     = {69 -- 74},
  year      = {2002},
  language  = {de}
}
@article{SchmitzHirschBongaertsetal.2002,
  author    = {Schmitz, M. and Hirsch, E. and Bongaerts, Johannes and Takors, Ralf},
  title     = {Pulse experiments as a prerequisite for the quantification of in vivo enzyme kinetics in aromatic amino acid pathway of Eschericia coli},
  series = {Biotechnology progress},
  volume    = {Vol. 18},
  journal   = {Biotechnology progress},
  number    = {Iss. 5},
  issn      = {1520-6033 (E-Journal); 8756-7938 (Print)},
  pages     = {935 -- 941},
  year      = {2002},
  language  = {en}
}
@incollection{SchmitzDietzeCzarnecki2019,
  author    = {Schmitz, Manfred and Dietze, Christian and Czarnecki, Christian},
  title     = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  series = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  booktitle = {Enabling digital transformation through robotic process automation at Deutsche Telekom},
  editor    = {Urbach, Nils and R{\"o}glinger, Maximilian},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-95272-7},
  doi       = {10.1007/978-3-319-95273-4_2},
  pages     = {15 -- 33},
  year      = {2019},
  abstract  = {Due to the high number of customer contacts, fault clearances, installations, and product provisioning per year, the automation level of operational processes has a significant impact on financial results, quality, and customer experience. Therefore, the telecommunications operator Deutsche Telekom (DT) has defined a digital strategy with the objectives of zero complexity and zero complaint, one touch, agility in service, and disruptive thinking. In this context, Robotic Process Automation (RPA) was identified as an enabling technology to formulate and realize DT's digital strategy through automation of rule-based, routine, and predictable tasks in combination with structured and stable data.},
  language  = {en}
}
@masterthesis{Schmitz2023,
  type      = {Bachelor Thesis},
  author    = {Schmitz, Marvin},
  title     = {Eishockey Uni-Cup der RWTH Aachen : Produktion einer Sport{\"u}bertragung},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {43 Seiten},
  year      = {2023},
  abstract  = {Der Uni-Cup ist ein Amateur Eishockey Turnier der RWTH Aachen. Es treten Studierende und Professor:innen gegeneinander an. Ausgetragen wurde das Turnier vor etwa 2.500 Zuschauern in der 100,5 Arena am Tivoli. Um das Event einer breiteren Masse zug{\"a}nglich zu machen, wurde dort im Rahmen der Bachelorarbeit erstmals eine Live {\"U}bertragung produziert. Das Ziel dabei war es, eine m{\"o}glichst professionelle und unterhaltsame Show zu kreieren.},
  language  = {de}
}
@masterthesis{Schmitz2022,
  type      = {Bachelor Thesis},
  author    = {Schmitz, Moritz},
  title     = {Kochen inklusiver gestalten. : Bed{\"u}rfnisorientiertes K{\"u}chensystem f{\"u}r Menschen mit Sehbeeintr{\"a}chtigungen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {153 Seiten},
  year      = {2022},
  abstract  = {Es ist nachweislich ges{\"u}nder und h{\"a}ufig g{\"u}nstiger selber zu kochen und es gibt dem Menschen mehr Kontrolle {\"u}ber seine Ern{\"a}hrung. Bis dato wird keine K{\"u}chenmaschine angeboten, die von blinden Menschen bedient werden kann, obwohl gerade solche Produkte den Alltag dieser Gruppe enorm vereinfachen k{\"o}nnten. „Clu." ist ein modulares K{\"u}chensystem, welches von einer App unterst{\"u}tzt wird. Die Basis besteht aus einer K{\"u}chenmaschine, die {\"u}ber Sprache und haptische Bedienelemente gesteuert wird. Durch die Anwendung des Mehr-Sinne-Prinzip, der Simplifizierung von Funktionen und der Einbindung von Smart Home Komponenten werden nicht nur Menschen mit Sehbeeintr{\"a}chtigungen profitieren. Beispielsweise funktioniert das Kochen nach Rezept nun {\"a}hnlich wie das H{\"o}ren eines H{\"o}rbuches und die User k{\"o}nnen sich dem in ihrem favorisierten Tempo annehmen. „Clu." ist ein Ansatz f{\"u}r eine neue Kategorie von Produkten, die zeigen, wie attraktiv inklusivere Produktl{\"o}sungen aussehen k{\"o}nnen.},
  language  = {de}
}