@article{AbbasHedwigBalcetal.2023,
  author    = {Abbas, Karim and Hedwig, Lukas and Balc, Nicolae and Bremen, Sebastian},
  title     = {Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling},
  series = {Polymers},
  volume    = {2023},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/polym15214293},
  pages     = {Artikel 4293},
  year      = {2023},
  abstract  = {Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK's economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100\% solid and subjected to thermal post-treatment. This corresponds to a 20\% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15\% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70\% in tool production.},
  language  = {en}
}
@inproceedings{GerhardsSchleserOtten2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten, Christian},
  title     = {Advancements of mobile vacuum laser welding for industrial thick sheet applications},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Aktuelle Trends bei RP und RT},
  series = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  journal   = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  isbn      = {0023-5563},
  pages     = {27 -- 30},
  year      = {1997},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Alles automatisch : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  volume    = {Bd. 80},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  number    = {H. 4},
  issn      = {0013-581X},
  pages     = {196 -- 199},
  year      = {1998},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Allgemeines Ger{\"a}uschgesetz und spezifische Schallkenngr{\"o}ßen.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  isbn      = {0017-9906},
  pages     = {437 -- 440},
  year      = {1992},
  language  = {de}
}
@inproceedings{PfaffLarkowskiBurnham2011,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An application of adaptive control in the behavioural framework},
  series = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  booktitle = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <21, 2011, Las Vegas>},
  isbn      = {978-1-4577-1078-0 ; 978-0-7695-4495-3},
  pages     = {49 -- 54},
  year      = {2011},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@article{KaemperDoepperEhrfeldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and D{\"o}pper, J. and Ehrfeld, W. and Hagemann, B.},
  title     = {An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; K{\"a}mper, K.-P.; Dasbach, U.; D{\"o}pper, J.; Ehrfeld, W.; Kaupert, M.},
  series = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  journal   = {Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey},
  publisher = {Computational Mechanics Publ.},
  address   = {Southampton [u.a.]},
  isbn      = {1-85312-390-0},
  pages     = {275},
  year      = {1995},
  language  = {en}
}
@article{EmontsBuyel2023,
  author    = {Emonts, Jessica and Buyel, Johannes Felix},
  title     = {An overview of descriptors to capture protein properties - Tools and perspectives in the context of QSAR modeling},
  series = {Computational and Structural Biotechnology Journal},
  journal   = {Computational and Structural Biotechnology Journal},
  number    = {21},
  publisher = {Research Network of Computational and Structural Biotechnology},
  address   = {Gotenburg},
  issn      = {2001-0370 (online-ressource)},
  doi       = {10.1016/j.csbj.2023.05.022},
  pages     = {3234 -- 3247},
  year      = {2023},
  abstract  = {Proteins are important ingredients in food and feed, they are the active components of many pharmaceutical products, and they are necessary, in the form of enzymes, for the success of many technical processes. However, production can be challenging, especially when using heterologous host cells such as bacteria to express and assemble recombinant mammalian proteins. The manufacturability of proteins can be hindered by low solubility, a tendency to aggregate, or inefficient purification. Tools such as in silico protein engineering and models that predict separation criteria can overcome these issues but usually require the complex shape and surface properties of proteins to be represented by a small number of quantitative numeric values known as descriptors, as similarly used to capture the features of small molecules. Here, we review the current status of protein descriptors, especially for application in quantitative structure activity relationship (QSAR) models. First, we describe the complexity of proteins and the properties that descriptors must accommodate. Then we introduce descriptors of shape and surface properties that quantify the global and local features of proteins. Finally, we highlight the current limitations of protein descriptors and propose strategies for the derivation of novel protein descriptors that are more informative.},
  language  = {en}
}
@article{Grundmann1997,
  author    = {Grundmann, Reinhard},
  title     = {Analyse und Beurteilung des Ger{\"a}usches von Radialventilatoren},
  series = {The Fifth Conference Industrial Fans / J. Otte},
  journal   = {The Fifth Conference Industrial Fans / J. Otte},
  address   = {Gliwice},
  pages     = {358 S.},
  year      = {1997},
  language  = {de}
}
@inproceedings{VedralWollert2004,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Analyse und Definition der Qualit{\"a}t von Funkkan{\"a}len f{\"u}r die Echtzeit{\"u}bertragung},
  series = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  booktitle = {Funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik : Tagung D{\"u}sseldorf, 4. und 5. Mai 2004. (VDI-Berichte ; 1843)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091843-8},
  pages     = {113 -- 122},
  year      = {2004},
  language  = {de}
}
@article{GrundmannBommes2004,
  author    = {Grundmann, Reinhard and Bommes, Leonhard},
  title     = {Analyse von Kennfeldern drallgesteuerter Radialventilatoren},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  isbn      = {0017-9906},
  pages     = {54 -- 62},
  year      = {2004},
  language  = {de}
}
@inproceedings{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Analysis of Big Data Streams to obtain Braking Reliability Information for Train Protection systems},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{VedralWollert2006,
  author    = {Vedral, A. and Wollert, J{\"o}rg},
  title     = {Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment},
  series = {Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006},
  booktitle = {Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  organization    = {International Workshop on Factory Communication Systems <2006, Torino>},
  isbn      = {1-4244-0379-0},
  pages     = {119 -- 124},
  year      = {2006},
  language  = {de}
}
@article{Klocke1995,
  author    = {Klocke, Martina},
  title     = {Angebotsstrukturen und Kosten bzw. Wirtschaftlichkeit von Bildungsangeboten},
  series = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  journal   = {Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut f{\"u}r Berufsbildung. Christel Alt ... (Hrsg.)},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  isbn      = {3-7639-0531-6},
  pages     = {37 -- 40},
  year      = {1995},
  language  = {de}
}
@incollection{Schmidt2014,
  author    = {Schmidt, Herbert},
  title     = {Angst vor Zukunft, Lust auf Zukunft},
  series = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  booktitle = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  publisher = {Roland Eller},
  address   = {Potsdam},
  pages     = {255 -- 269},
  year      = {2014},
  language  = {de}
}
@incollection{FiedlerHennMelcher2015,
  author    = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin},
  title     = {ANPAK - Ein Anpassungskurs f{\"u}r Studienanf{\"a}nger in den Ingenieurwissenschaften},
  series = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  booktitle = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  editor    = {Morschheuser, Petra},
  publisher = {Duale Hochschule Baden-W{\"u}rttemberg (DHBW)},
  address   = {Mosbach},
  isbn      = {978-3-943656-02-2},
  pages     = {90 -- 93},
  year      = {2015},
  language  = {de}
}
@inproceedings{VedralWollert2003,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Ansatz eines dienstorientierten Ad-Hoc netzwerkf{\"a}higen Bluetooth-Netzwerks mit CORBA-Schnittstelle f{\"u}r drahtgebundene und drahtlose Netzwerke},
  series = {Bluetooth : 4. Kongress, Dortmund, 29. - 30 Januar 2003},
  booktitle = {Bluetooth : 4. Kongress, Dortmund, 29. - 30 Januar 2003},
  pages     = {1 -- 13},
  year      = {2003},
  language  = {de}
}
@article{KallweitAbromeitDuesetal.1994,
  author    = {Kallweit, Stephan and Abromeit, W. and Dues, M. and Siekmann, H.},
  title     = {Anwendung der LDA zur Untersuchung der instation{\"a}ren Str{\"o}mung im Nachleitrad einer axialen Kreiselpumpenstufe / Abromeit, W. ; Dues, M. ; Siekmann, H. ; Kallweit, S.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-0162-4},
  pages     = {27.1 -- 27.6},
  year      = {1994},
  language  = {de}
}
@article{KallweitEbingerDuesetal.1993,
  author    = {Kallweit, Stephan and Ebinger, G. and Dues, M. and Siekmann, H.},
  title     = {Anwendung des Laserlichtschnitt-Verfahrens zur qualitativen Untersuchung der Durchstr{\"o}mung von Kreiselpumpen / Ebinger, G. ; Kallweit, S. ; Dues, M. ; Siekmann, H.},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  journal   = {Lasermethoden in der Str{\"o}mungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft f{\"u}r Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-86111-595-6},
  pages     = {37.1 -- 37.4},
  year      = {1993},
  language  = {de}
}
@article{KaemperSchulzArnoldetal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Schulz, C. and Arnold, J. and Detter, H.},
  title     = {Anwendungen der LIGA-Technik f{\"u}r medizinische Diagnose- und Therapiesysteme. Schulz, C.; Arnold, J.; Detter, H.; D{\"o}pper, J.; Ehrfeld, W., Erbel, R.; K{\"a}mper, K.-P.; Koch, L.; Lehr, H.; Roth, T.},
  series = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  journal   = {Elektrotechnik und Informationstechnik. 112 (1995), H. 9},
  isbn      = {0932-383X},
  pages     = {493},
  year      = {1995},
  language  = {de}
}
@article{StarkeDrews1982,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Anwendungsmoeglichkeiten von Schweissrobotern und automatisierten Schweisssystemen im Schiffbau},
  series = {Schweisstechnik. 32 (1982), H. 7},
  journal   = {Schweisstechnik. 32 (1982), H. 7},
  isbn      = {0036-7192},
  pages     = {305 -- 308},
  year      = {1982},
  language  = {de}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrej},
  title     = {Application of electron beam welding to fabrication of steel-aluminium dissimilar joint},
  series = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  booktitle = {Beam technologies \& laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012},
  publisher = {Publ. House},
  address   = {Saint Petersburg},
  pages     = {265 -- 279},
  year      = {2012},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserMoelleretal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.},
  title     = {Application of polymers in textile reinforced concrete : from the interface to construction elements},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {55 -- 64},
  year      = {2006},
  language  = {en}
}
@inproceedings{StieglitzWollert2011,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Approach of using ultra-wideband-radio in industrial real-time ethernet networks},
  series = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  booktitle = {The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <4, 2011, Orlando, Fla.>},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Apps f{\"u}r den G{\"u}terwagen? Wie der G{\"u}terwagen 4.0 die effiziente Integration der G{\"u}terbahn in ERTMS erm{\"o}glicht},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {de}
}
@article{UlmerGroeningerBraunetal.2020,
  author    = {Ulmer, Jessica and Gr{\"o}ninger, Marc and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {AR Arbeitspl{\"a}tze: F{\"u}r hochflexible und skalierbare Produktionsumgebungen},
  series = {atp Magazin},
  volume    = {62},
  journal   = {atp Magazin},
  number    = {10},
  publisher = {Vulkan-Verlag},
  address   = {Essen},
  issn      = {2364-3137},
  doi       = {10.17560/atp.v62i10.2495},
  year      = {2020},
  abstract  = {Trotz fortschreitender Automatisierung bleiben manuelle T{\"a}tigkeiten ein wichtiger Baustein der Fertigung kundenindividueller Produkte. Um die Mitarbeiter(innen) zu unterst{\"u}tzen und um eine effiziente Arbeit zu erm{\"o}glichen, werden zunehmend auf Augmented Reality (AR) basierende Systeme eingesetzt. Die vorgestellte Arbeit konzentriert sich auf die Entwicklung ganzheitlicher AR-Arbeitspl{\"a}tze f{\"u}r den Einsatz in kleinen und mittleren Unternehmen (KMU). Das entwickelte AR- Handarbeitskonzept beinhaltet eine Just-in-time-Darstellung der Arbeitsaufgaben auf Werkst{\"u}cken mit automatisierter Fertigungskontrolle. Als Reaktion auf kurze Produktlebenszyklen und hohe Produktvielfalten sind alle Komponenten auf maximale Flexibilit{\"a}t ausgelegt. Ein Umr{\"u}sten auf neue Produkte kann innerhalb von Minuten erfolgen.},
  language  = {de}
}
@inproceedings{ChavezBermudezWollert2020,
  author    = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg},
  title     = {Arduino based Framework for Rapid Application Development of a Generic IO-Link interface},
  series = {Kommunikation und Bildverarbeitung in der Automation. Ausgew{\"a}hlte Beitr{\"a}ge der Jahreskolloquien KommA und BVAu 2018},
  booktitle = {Kommunikation und Bildverarbeitung in der Automation. Ausgew{\"a}hlte Beitr{\"a}ge der Jahreskolloquien KommA und BVAu 2018},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-59895-5},
  doi       = {10.1007/978-3-662-59895-5_2},
  pages     = {21 -- 33},
  year      = {2020},
  abstract  = {The implementation of IO-Link in the automation industry has increased over the years. Its main advantage is it offers a digital point-to-point plugand-play interface for any type of device or application. This simplifies the communication between devices and increases productivity with its different features like self-parametrization and maintenance. However, its complete potential is not always used. The aim of this paper is to create an Arduino based framework for the development of generic IO-Link devices and increase its implementation for rapid prototyping. By generating the IO device description file (IODD) from a graphical user interface, and further customizable options for the device application, the end-user can intuitively develop generic IO-Link devices. The peculiarity of this framework relies on its simplicity and abstraction which allows to implement any sensor functionality and virtually connect any type of device to an IO-Link master. This work consists of the general overview of the framework, the technical background of its development and a proof of concept which demonstrates the workflow for its implementation.},
  language  = {en}
}
@inproceedings{ThurnGebhardt2017,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Arousing Enthusiasm for STEM: Teaching 3D Printing Technology},
  series = {Conference Proceedings: New Perspectives in Science Education},
  booktitle = {Conference Proceedings: New Perspectives in Science Education},
  publisher = {liberiauniversitaria.it},
  address   = {Padua},
  isbn      = {978-88-6292-847-2},
  pages     = {87 -- 92},
  year      = {2017},
  language  = {en}
}
@article{BaatzButzBaeck1972,
  author    = {Baatz, Udo and Butz, Hans-Werner and B{\"a}ck, Karin},
  title     = {Aspekte der Bildschirmprogrammierung im Rahmen des rechnergest{\"u}tzten Konstruierens. Some aspects of CRT-screen programming in computer aided design.},
  series = {eR - Elektronische Rechenanlagen},
  volume    = {14},
  journal   = {eR - Elektronische Rechenanlagen},
  number    = {5},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  isbn      = {0013-5720},
  doi       = {10.1524/itit.1972.14.16.229},
  pages     = {229 -- 235},
  year      = {1972},
  abstract  = {In den letzten Jahren hat der Einsatz von graphischen Datenverarbeitungsanlagen auf dem technischen, naturwissenschaftlichen und kommerziellen Sektor immer mehr an allgemeinem Interesse und Bedeutung gewonnen. Diese Entwicklung hat neue Aspekte und Probleme in bezug auf Anwendungsm{\"o}glichkeiten, Programmierung, Datenstrukturen sowie der Hard- und Software dieser Anlagen hervorgerufen. Zur Zeit werden von verschiedenen Institutionen die Einsatzm{\"o}glichkeiten graphischer Datenverarbeitungsanlagen in den Funktionsbereichen Konstruktion und Arbeitsvorbereitung untersucht. Der folgende Beitrag zeigt eine kurze {\"U}bersicht {\"u}ber die verschiedenen programmiertechnischen Probleme sowie eine Auswahl von Programmbeispielen, die am Laboratorium f{\"u}r Werkzeugmaschinen und Betriebslehre der RWTH Aachen entwickelt wurden. Bei den Bildschirmsystemen wird zwischen zwei Arten unterschieden. Aktive Bildschirmeinheiten besitzen als {\"a}ußeres Merkmal einen Lichtstift und eine Funktionstastatur zur Programmverzweigung. Passive Bildschirmeinheiten lassen demgegen{\"u}ber einen Eingriff in das Programm in der oben aufgef{\"u}hrten Form nicht zu. Zwischen diesen extremen Formen gibt es noch eine Reihe Mischformen. Die in Aachen zur Verf{\"u}gung stehende Anlage arbeitet aktiv und wird im nachfolgenden Kapitel n{\"a}her beschrieben.},
  language  = {de}
}
@article{KaemperLehrAbeletal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  journal   = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  publisher = {Fuji Technology Press},
  pages     = {31 -- 31},
  year      = {1995},
  language  = {en}
}
@article{WollertFiedler1996,
  author    = {Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {atp-Marktanalyse Echtzeitbetriebssysteme},
  series = {Automatisierungstechnische Praxis : atp ; Praxis der Meß-, Steuerungs-, Regelungs- und Informationstechnik mit Softwaretechnik},
  volume    = {Bd. 38},
  journal   = {Automatisierungstechnische Praxis : atp ; Praxis der Meß-, Steuerungs-, Regelungs- und Informationstechnik mit Softwaretechnik},
  number    = {H. 1},
  issn      = {0340-4730},
  pages     = {33 -- 44},
  year      = {1996},
  language  = {de}
}
@article{EnningSchmidtWilbring2019,
  author    = {Enning, Manfred and Schmidt, Bernd and Wilbring, Daniela},
  title     = {Auf dem Weg zur autonomen Anschlussbedienung},
  series = {Privatbahn-Magazin},
  journal   = {Privatbahn-Magazin},
  number    = {3},
  publisher = {Bahn Media},
  address   = {Suhlendorf},
  issn      = {1865-0163},
  pages     = {40 -- 43},
  year      = {2019},
  language  = {de}
}
@book{Knepper2004,
  author    = {Knepper, Ludger},
  title     = {Aufbau eines Benchmark-Systems f{\"u}r operative Unternehmensprozesse},
  address   = {FH Aachen},
  year      = {2004},
  language  = {de}
}
@article{ReisgenSchaeferWilmsetal.2017,
  author    = {Reisgen, Uwe and Sch{\"a}fer, Johannes and Wilms, Konrad and Schleser, Markus},
  title     = {Aufmischungsarmes, dickschichtiges MSG-Auftragschweißen mit entkoppelter Zweidrahttechnik},
  series = {Schweißen und Schneiden},
  volume    = {69},
  journal   = {Schweißen und Schneiden},
  number    = {12},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {838 -- 843},
  year      = {2017},
  abstract  = {F{\"u}r Auftragschweißaufgaben existiert eine Vielzahl an verfahrenstechnischen Prozessvarianten, die je nach Charakteristik und Anwendungsfall ausgew{\"a}hlt werden. Ein Nachteil der vorwiegend verwendeten Metall- Schutzgasschweißprozesse (MSG) f{\"u}r das Auftragschweißen ist durch die direkte Kopplung von Drahtvorschub zu Energieeintrag gegeben. Die vorgestellte Zweidraht-Prozessvariante kann durch die Ausbildung eines {\"u}bertragenen und eines nicht-{\"u}bertragenen Lichtbogens die elektrische Leistung beider Lichtb{\"o}gen variieren und damit einen direkten Einfluss auf die Prozessgr{\"o}ßen Abschmelzleistung und Aufschmelzgrad nehmen. Im Speziellen besteht {\"u}ber die Entkopplung von Drahtvorschub zu Schweißstromst{\"a}rke die M{\"o}glichkeit eines niederenergetischen Betriebs trotz hoher Drahtvorschubgeschwindigkeit. Damit lassen sich Aufschmelzgrade unter 2\% umsetzen und Abschmelzleistungen bis zu 15 kg/h realisieren.},
  language  = {de}
}
@article{GebhardtMathar1994,
  author    = {Gebhardt, Andreas and Mathar, W.},
  title     = {Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle},
  pages     = {188 -- 191},
  year      = {1994},
  language  = {de}
}
@article{Starke1988,
  author    = {Starke, G{\"u}nther},
  title     = {Auftragsbezogene Fertigung beim Schutzgasschweissen mit Robotern durch Einsatz flexibler Fertigungssysteme},
  series = {DVS-Berichte. 118 (1988)},
  journal   = {DVS-Berichte. 118 (1988)},
  isbn      = {0418-9639},
  pages     = {27 -- 31},
  year      = {1988},
  language  = {de}
}
@article{PeekenBennerPlatt1989,
  author    = {Peeken, Heinz and Benner, Joachim and Platt, Werner},
  title     = {Ausfallkriterien elastomerbest{\"u}ckter Wellenkupplungen},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {11},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {85 -- 88},
  year      = {1989},
  language  = {de}
}
@book{Knepper2004,
  author    = {Knepper, Ludger},
  title     = {Auslegung und Konstruktion von Hallentorantrieben},
  address   = {FH Aachen},
  year      = {2004},
  language  = {de}
}
@article{GrundmannBommesDieter1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Dieter, Reinartz},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 1},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  isbn      = {0017-9906},
  pages     = {28 -- 37},
  year      = {1998},
  language  = {de}
}
@article{GrundmannBommesReinartz1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Reinartz, Dieter},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 2},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  isbn      = {0017-9906},
  pages     = {44 -- 50},
  year      = {1998},
  language  = {de}
}
@masterthesis{Pfaff2007,
  type      = {Bachelor Thesis},
  author    = {Pfaff, Raphael},
  title     = {Automated processing of the ISL Doppler images},
  year      = {2007},
  language  = {en}
}
@article{RakeEnningKurthetal.1994,
  author    = {Rake, Heinrich and Enning, Manfred and Kurth, Johannes and Schr{\"o}der, Walter},
  title     = {Automatic uncoupler completes automation at the hump},
  series = {RGI - Railway Gazette International},
  volume    = {150},
  journal   = {RGI - Railway Gazette International},
  number    = {6},
  publisher = {Reed Business},
  address   = {Sutton},
  issn      = {0373-5346},
  pages     = {371 -- 374},
  year      = {1994},
  language  = {en}
}
@article{EnningBernhardRake1994,
  author    = {Enning, Manfred and Bernhard, S. and Rake, H.},
  title     = {Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H.},
  series = {Control Engineering Practice. 2 (1994), H. 6},
  journal   = {Control Engineering Practice. 2 (1994), H. 6},
  isbn      = {0967-0661},
  pages     = {961 -- 967},
  year      = {1994},
  language  = {en}
}
@article{WollertLeidinger2010,
  author    = {Wollert, J{\"o}rg and Leidinger, Rafael},
  title     = {Automation trifft Automotive : SPS in der Fahrzeugtechnik},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {4/5},
  publisher = {WEKA Fachmedien},
  address   = {Haar},
  issn      = {1614-0125},
  pages     = {44 -- 48},
  year      = {2010},
  abstract  = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).},
  language  = {de}
}
@inproceedings{BudaSchuermannWollert2008,
  author    = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Automatische Generierung von Automatisierungsobjekten nach IEC 61131-3 zur einfachen Integration von Funkkomponenten in {\"u}bergeordnete Steuerungssysteme},
  series = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)},
  booktitle = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Verein Deutscher Ingenieure / Kompetenzfeld Informationstechnik},
  isbn      = {978-3-18-092010-8 ; 3-18-092010-8},
  pages     = {75 -- 84},
  year      = {2008},
  language  = {de}
}
@article{StarkeDrews1979,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Automatisches Nahtfuehrungssystem an einem Industrie-Roboter},
  series = {VDI Berichte (1979)},
  journal   = {VDI Berichte (1979)},
  isbn      = {0083-5560},
  pages     = {79 -- 85},
  year      = {1979},
  language  = {de}
}
@book{WollertFiedler1995,
  author    = {Wollert, J{\"o}rg and Fiedler, J{\"o}rg},
  title     = {Automatisieren mit dem PC : Hardware, Software, Realisierung},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-401318-9},
  pages     = {VIII, 293 S.},
  year      = {1995},
  language  = {de}
}
@article{WollertFiedlerStockmann1994,
  author    = {Wollert, J{\"o}rg and Fiedler, J{\"o}rg and Stockmann, T.},
  title     = {Automatisieren mit dem PC : was der Personal Computer kann und wo er passen muss},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 6},
  issn      = {0013-5658},
  pages     = {76 -- 82},
  year      = {1994},
  language  = {de}
}