@article{NabilPetersonSchmidtetal.2010,
  author    = {Nabil, F. and Peterson, Leif Arne and Schmidt, A. and Geerdes, D.},
  title     = {Die Holzkuppel des Neuen Palais in Potsdam},
  series = {Bauingenieur},
  volume    = {85},
  journal   = {Bauingenieur},
  number    = {8},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {324 -- 330},
  year      = {2010},
  language  = {de}
}
@article{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Experimental investigation of the face stability of shallow tunnels in sand},
  series = {Acta Geotechnica},
  volume    = {5},
  journal   = {Acta Geotechnica},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1125},
  doi       = {10.1007/s11440-010-0110-7},
  pages     = {43 -- 62},
  year      = {2010},
  abstract  = {Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and L{\´e}ca/Dormieux showed the best agreement to the measurements.},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@article{KuhnhenneDoeringFeldmann2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Feldmann, Markus},
  title     = {Grunds{\"a}tze und L{\"o}sungen zur W{\"a}rmebr{\"u}ckenreduktion im Metallleichtbau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {5},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001330},
  pages     = {345 -- 355},
  year      = {2010},
  abstract  = {Die Anforderungen an das energiesparende Bauen sind mit der Einf{\"u}hrung der Energieeinsparverordnung (EnEV) 2009 auch im Industrie- und Gewerbebau deutlich versch{\"a}rft worden. Einen wesentlichen Beitrag zur Energieeinsparung liefert die Minimierung des Transmissionsw{\"a}rmetransfers. Analysiert man Geb{\"a}udeh{\"u}llen in Metallleichtbauweise stellt man fest, dass eine Erh{\"o}hung der W{\"a}rmed{\"a}mmst{\"a}rke allein noch nicht zielf{\"u}hrend ist, zus{\"a}tzlich sind W{\"a}rmebr{\"u}ckeneffekte zu ber{\"u}cksichtigen und deren Einfl{\"u}sse auf die W{\"a}rmetransmission zu reduzieren. Neben der Bedeutung f{\"u}r die Energieeinsparung ist eine w{\"a}rmetechnisch optimierte Detailausbildung auch erforderlich, um einen ausreichenden Feuchteschutz (Vermeidung von Tauwasser und Schimmelpilz) zu realisieren und so Sch{\"a}den zu vermeiden. Ein wichtiges Hilfsmittel stellt hierzu der vom Industrieverband f{\"u}r Bausysteme im Metallleichtbau (IFBS) herausgegebene W{\"a}rmebr{\"u}ckenatlas der Metall-Sandwichbauweise dar.},
  language  = {de}
}
@article{KuhnhenneDoeringKockeretal.2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Kocker, Ronald and Pyschny, Dominik and Feldmann, Markus},
  title     = {Die {\"O}kobilanz als Baustein der Nachhaltigkeitsbewertung im Industrie- und Gewerbebau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001336},
  pages     = {439 -- 447},
  year      = {2010},
  abstract  = {Im Herbst 2009 wurde das "Deutsche G{\"u}tesiegel Nachhaltiges Bauen" f{\"u}r die Geb{\"a}udetypen Industriebauten und Handelsbauten offiziell vorgestellt. Die {\"O}kobilanz als wichtiger Baustein der Nachhaltigkeitsbewertung wird somit auch im Industrie- und Gewerbebau zuk{\"u}nftig stark an Bedeutung gewinnen. Der vorliegende Beitrag beinhaltet einen Vergleich der Umweltleistung verschiedener Bauweisen des Industrie- und Gewerbebaus, die durch die {\"O}kobilanzierung quantifizierbar wird, anhand von momentan verf{\"u}gbaren Daten und Methoden. Es werden ausgew{\"a}hlte Ergebnisse sowie vorhandene Unsicherheiten und daraus resultierender Forschungsbedarf aufgezeigt.},
  language  = {de}
}
@article{Hebel2011,
  author    = {Hebel, Christoph},
  title     = {Anwendungen von makroskopischen Personenverkehrsnachfragemodellen},
  series = {Stadt Region Land. 2011 (2011), H. 88},
  journal   = {Stadt Region Land. 2011 (2011), H. 88},
  publisher = {ISB},
  address   = {Aachen},
  isbn      = {978-3-88354-162-4},
  pages     = {7 -- 14},
  year      = {2011},
  language  = {de}
}
@article{HebelBillionJohaenning2011,
  author    = {Hebel, Christoph and Billion, Bernd and Joh{\"a}nning, Katja},
  title     = {Evaluation von Planungswerkst{\"a}tten in der St{\"a}dteRegion},
  series = {Stadt Region Land. 2011 (2011), H. 88},
  journal   = {Stadt Region Land. 2011 (2011), H. 88},
  publisher = {RWTH},
  address   = {Aachen},
  isbn      = {978-3-88354-162-4},
  pages     = {15 -- 20},
  year      = {2011},
  language  = {de}
}
@article{BienerSasseWemhoff2011,
  author    = {Biener, Ernst and Sasse, Torsten and Wemhoff, Thomas},
  title     = {Deponie auf Deponie neue Wege bei der Stilllegung von Altdeponien genehmigungstechnische, technische und wirtschaftliche Aspekte},
  series = {Fachtagung Die Sichere Deponie : Sicherung von Deponien und Altlasten mit Kunststoffen ; 24. bis 25. Februar 2011, CCW Congress Centrum W{\"u}rzburg / Leitung: Dieter Jost ...},
  journal   = {Fachtagung Die Sichere Deponie : Sicherung von Deponien und Altlasten mit Kunststoffen ; 24. bis 25. Februar 2011, CCW Congress Centrum W{\"u}rzburg / Leitung: Dieter Jost ...},
  publisher = {SKZ},
  address   = {W{\"u}rzburg},
  pages     = {1 -- 13},
  year      = {2011},
  language  = {de}
}
@article{BienerSasseWemhof2011,
  author    = {Biener, Ernst and Sasse, Torsten and Wemhof, Thomas},
  title     = {Deponieneubau im Rahmen der Stilllegung - Ein Widerspruch?},
  pages     = {1 -- 14},
  year      = {2011},
  language  = {de}
}
@article{BleckenHolthausSellheier2011,
  author    = {Blecken, Udo and Holthaus-Sellheier, Ursula},
  title     = {Quantitative Prognoseverfahren f{\"u}r den B{\"u}roimmobilienmarkt, Tl.1},
  series = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  volume    = {21},
  journal   = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  number    = {1},
  publisher = {Werner},
  address   = {K{\"o}ln},
  isbn      = {0938-0175},
  pages     = {30 -- 39},
  year      = {2011},
  language  = {de}
}
@article{Hebel2011,
  author    = {Hebel, Christoph},
  title     = {Makroskopische Personenverkehrsnachfragemodelle: Anwendungspraxis in deutschen Großst{\"a}dten},
  series = {Anspr{\"u}che einer mobilen Gesellschaft an ein verl{\"a}ssliches Verkehrssystem / hrsg. Deutsche Verkehrswissenschaftliche Gesellschaft e. V},
  journal   = {Anspr{\"u}che einer mobilen Gesellschaft an ein verl{\"a}ssliches Verkehrssystem / hrsg. Deutsche Verkehrswissenschaftliche Gesellschaft e. V},
  publisher = {Dt. Verkehrswiss. Ges.},
  address   = {Berlin},
  isbn      = {978-3-942488-05-1},
  pages     = {226 -- 231},
  year      = {2011},
  language  = {de}
}
@article{BleckenHolthausSellheier2011,
  author    = {Blecken, Udo and Holthaus-Sellheier, Ursula},
  title     = {Quantitative Prognoseverfahren f{\"u}r den B{\"u}roimmobilienmarkt. Tl. 2},
  series = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  volume    = {21},
  journal   = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  number    = {3},
  publisher = {Werner},
  address   = {K{\"o}ln},
  isbn      = {0938-0175},
  pages     = {156 -- 163},
  year      = {2011},
  language  = {de}
}
@article{SiekmannMueller2011,
  author    = {Siekmann, Thomas and M{\"u}ller, Karsten},
  title     = {Anpassungspotenziale der konventionellen Regenwasserbehandlung im Mischsystem an Auswirkungen des Klimawandels},
  series = {Energie-, Wasser-Praxis : Fachzeitschrift f{\"u}r die Energie- und Wasser-Praxis. Bd. 62 (2011), Spezial LESAM 2011},
  journal   = {Energie-, Wasser-Praxis : Fachzeitschrift f{\"u}r die Energie- und Wasser-Praxis. Bd. 62 (2011), Spezial LESAM 2011},
  publisher = {DVGW},
  address   = {Bonn},
  issn      = {1436-6134},
  pages     = {48 -- 51},
  year      = {2011},
  language  = {de}
}
@article{Bung2011,
  author    = {Bung, Daniel B.},
  title     = {Developing flow in skimming flow regime on embankment stepped spillways},
  series = {Journal of hydraulic research},
  volume    = {Vol. 49},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 5},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {639 -- 648},
  year      = {2011},
  language  = {en}
}
@article{Bung2011,
  author    = {Bung, Daniel B.},
  title     = {Fließcharakteristik und Sauerstoffeintrag bei selbstbel{\"u}fteten Gerinnestr{\"o}mungen auf Kaskaden mit gem{\"a}ßigter Neigung},
  series = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  volume    = {Vol. 63},
  journal   = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  number    = {Iss. 3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-7566 (E-Journal); 0945-358X (Print)},
  pages     = {76 -- 81},
  year      = {2011},
  language  = {de}
}
@article{HeggerClassenFeldmannetal.2011,
  author    = {Hegger, Josef and Claßen, Martin and Feldmann, Markus and D{\"o}ring, Bernd and Schaumann, Peter and Sothmann, J{\"o}rg and Bohne, Dirk and Hargus, Steen and Barben, Daniel and Aarden, Erik and Schielke, Sabine},
  title     = {Integrierte und nachhaltigkeitsorientierte Deckensysteme im Stahl- und Verbundbau},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 10},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {728 -- 733},
  year      = {2011},
  language  = {de}
}
@article{DoeringFeldmannKuhnhenneetal.2011,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and M{\"u}ller, Dirk},
  title     = {Phasenwechselmaterial im Metallleichtbau zur Optimierung von Energieeffizienz und sommerlicher Raumtemperatur},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 9},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {666 -- 672},
  year      = {2011},
  language  = {de}
}
@article{BleckenHolthausSellheier2012,
  author    = {Blecken, Udo and Holthaus-Sellheier, Ursula},
  title     = {Quantitative Prognoseverfahren f{\"u}r Mietpreise von Bueroimmobilien am Beispiel D{\"u}sseldorf},
  series = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  volume    = {23},
  journal   = {GuG : Grundst{\"u}cksmarkt und Grundst{\"u}ckswert},
  number    = {1},
  publisher = {Werner},
  address   = {K{\"o}ln},
  issn      = {0938-0175},
  pages     = {12 -- 21},
  year      = {2012},
  language  = {de}
}
@article{Jochim2012,
  author    = {Jochim, Haldor E.},
  title     = {Die Ostheidebahn - eine Alternative zur Y-Trasse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {61},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {11},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {34 -- 37},
  year      = {2012},
  language  = {de}
}
@article{KirsteinMuellerWaleckiMingersetal.2012,
  author    = {Kirstein, Simon and M{\"u}ller, Karsten and Walecki-Mingers, Mark and Deserno, Thomas M.},
  title     = {Robust adaptive flow line detection in sewer pipes},
  series = {Automation in construction},
  journal   = {Automation in construction},
  number    = {21},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7891 (E-Journal) ; 0926-5805 (Print)},
  doi       = {10.1016/j.autcon.2011.05.009},
  pages     = {24 -- 31},
  year      = {2012},
  abstract  = {As part of a novel approach to automatic sewer inspection, this paper presents a robust algorithm for automatic flow line detection. A large image repository is obtained from about 50,000 m sewers to represent the high variability of real world sewer systems. Automatic image processing combines Canny edge detection, Hough transform for straight lines and cost minimization using Dijkstra's shortest path algorithm. Assuming that flow lines are mostly smoothly connected horizontal structures, piecewise flow line delineation is reduced to a process of selecting adjacent line candidates. Costs are derived from the gap between adjacent candidates and their reliability. A single parameter α enables simple control of the algorithm. The detected flow line may precisely follow the segmented edges (α = 0.0) or minimize gaps at joints (α = 1.0). Both, manual and ground truth-based analysis indicate that α = 0.8 is optimal and independent of the sewer's material. The algorithm forms an essential step to further automation of sewer inspection.},
  language  = {en}
}
@article{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Initial stage of two-dimensional dam-break waves: laboratory versus VOF},
  series = {Journal of hydraulic research},
  volume    = {50},
  journal   = {Journal of hydraulic research},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  doi       = {10.1080/00221686.2011.639981},
  pages     = {89 -- 97},
  year      = {2012},
  abstract  = {Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.},
  language  = {en}
}
@article{LaumannMainz2012,
  author    = {Laumann, J{\"o}rg and Mainz, Stefan},
  title     = {Direkte Ermittlung der erforderlichen Einspanntiefe von I‑f{\"o}rmigen Stahlquerschnitten in Betonkonstruktionen},
  volume    = {81},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049},
  doi       = {10.1002/stab.201201620},
  pages     = {850 -- 860},
  year      = {2012},
  abstract  = {F{\"u}r die Ermittlung der erforderlichen Einspanntiefe von eingespannten Stahlquerschnitten in Betonkonstruktionen existieren verschiedene Bemessungsmodelle. Diese basieren vorwiegend auf Grundlage nationaler Normen wie z. B. DIN 18800 [1] und DIN 1045 [2], die durch die europ{\"a}ische Normung ersetzt wurden. Aus diesem Grund wird in diesem Aufsatz ein Berechnungsmodell f{\"u}r die erforderliche Einspanntiefe von eingespannten Stahlquerschnitten in Betonkonstruktionen auf Grundlage des Eurocodes vorgestellt. Das Grundger{\"u}st f{\"u}r dieses Berechnungsmodell bildet das Verfahren nach Kindmann und Laumann, welches in [3] behandelt wurde. Gleichzeitig werden neue Formeln zur direkten Ermittlung der Mindesteinspanntiefe vorgestellt. Behandelt werden gewalzte I-Profile f{\"u}r einachsige Biegung um die starke Achse (y-y) mit Drucknormalkraft.},
  language  = {de}
}
@article{MuellerBillmaierMueller2013,
  author    = {M{\"u}ller, Karsten and Billmaier, Karl and M{\"u}ller, Ernst A.},
  title     = {Abwasserw{\"a}rmenutzung},
  series = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  journal   = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  publisher = {Deutscher Fachverlag},
  address   = {Frankfurt am Main},
  issn      = {1438-5716},
  pages     = {24 -- 26},
  year      = {2013},
  language  = {de}
}
@article{Bung2013,
  author    = {Bung, Daniel B.},
  title     = {Non-intrusive detection of air-water surface roughness in self-aerated chute flows},
  series = {Journal of hydraulic research},
  volume    = {Vol. 51},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 3},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {322 -- 329},
  year      = {2013},
  language  = {en}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@article{HeggerClassenSchaumannetal.2013,
  author    = {Hegger, Josef and Claßen, Martin and Schaumann, Peter and Sothmann, J{\"o}rg and Feldmann, Markus and D{\"o}ring, Bernd},
  title     = {Entwicklung einer integrierten Verbunddecke f{\"u}r nachhaltige Stahlbauten},
  series = {Stahlbau},
  volume    = {Vol. 82},
  journal   = {Stahlbau},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {11 -- 17},
  year      = {2013},
  language  = {de}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel B. and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@article{MalechaKlubertHeinenFuchs2014,
  author    = {Malecha, Hartmut and Klubert, J. and Heinen-Fuchs, Sabine},
  title     = {Laserscanning passe? 3-D-Oberfl{\"a}chenmodelle aus Bilddaten und deren messtechnischer Nutzen},
  series = {Wasserwirtschaft},
  volume    = {Jg. 104},
  journal   = {Wasserwirtschaft},
  number    = {Nr. 9},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {32 -- 35},
  year      = {2014},
  language  = {de}
}
@article{DemnyHebel2014,
  author    = {Demny, Andreas and Hebel, Christoph},
  title     = {Rechnergest{\"u}tzte Ermittlung der Verbindungsfunktionsstufen und der verbindungsbezogenen Angebotsqualit{\"a}t nach den Richtlinien f{\"u}r integrierte Netzgestaltung nach RIN 2008},
  series = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  volume    = {Jg. 58},
  journal   = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  number    = {H. 12},
  publisher = {Kirschbaum Verlag},
  address   = {Bonn},
  issn      = {0039-2219},
  pages     = {811 -- 820},
  year      = {2014},
  language  = {de}
}
@article{PyschnyDoeringFeldmann2014,
  author    = {Pyschny, D. and D{\"o}ring, Bernd and Feldmann, M.},
  title     = {Ermittlung der thermischen Leistungsf{\"a}higkeit des neuartigen multifunktionalen Verbunddeckensystems InaDeck},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  volume    = {89},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  number    = {3},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {116 -- 124},
  year      = {2014},
  language  = {de}
}
@article{OertelBung2015,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Numerische Str{\"o}mungssimulationen von Fließgew{\"a}ssern : Praxisanwendungen und zuk{\"u}nftige Entwicklungen},
  series = {Korrespondenz Wasserwirtschaft : KW},
  volume    = {8},
  journal   = {Korrespondenz Wasserwirtschaft : KW},
  number    = {H. 3},
  publisher = {Gesellschaft zur F{\"o}rderung der Abwassertechnik},
  address   = {Hennef},
  issn      = {1616-430X},
  pages     = {177 -- 182},
  year      = {2015},
  language  = {de}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@article{EgnerHeydeLaumannetal.2015,
  author    = {Egner, Ralf and Heyde, Stefan and Laumann, J{\"o}rg and Prokop, Ines},
  title     = {Vorschl{\"a}ge f{\"u}r eine anwenderfreundliche und praxistaugliche Novellierung der allgemeinen Bemessungsregeln und Regeln f{\"u}r den Hochbau (EN 1993 Teil 1-1)},
  series = {Stahlbau},
  volume    = {84},
  journal   = {Stahlbau},
  number    = {10},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.201510321},
  pages     = {811 -- 822},
  year      = {2015},
  language  = {de}
}
@article{OertelBung2015,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Stability and scour development of bed material on crossbar block ramps},
  series = {International journal of sediment research},
  volume    = {30},
  journal   = {International journal of sediment research},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1001-6279},
  doi       = {10.1016/j.ijsrc.2014.12.003},
  pages     = {344 -- 350},
  year      = {2015},
  abstract  = {Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.},
  language  = {en}
}
@article{BayonValeroGarciaBartualetal.2016,
  author    = {Bayon, Arnau and Valero, Daniel and Garcia-Bartual, Rafael and Vall{\´e}s-Mor{\´a}n, Francisco Jos{\´e} and L{\´o}pez-Jim{\´e}nez, P. Amparo},
  title     = {Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump},
  series = {Environmental Modelling \& Software},
  volume    = {80},
  journal   = {Environmental Modelling \& Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1364-8152},
  doi       = {10.1016/j.envsoft.2016.02.018},
  pages     = {322 -- 335},
  year      = {2016},
  abstract  = {A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the air-water interface, consequently aeration is modeled using an Eulerian-Eulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers.},
  language  = {en}
}
@article{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Sensitivity of turbulent Schmidt number and turbulence model to simulations of jets in crossflow},
  series = {Environmental Modelling and Software},
  volume    = {82},
  journal   = {Environmental Modelling and Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1364-8152 (electronic)},
  doi       = {10.1016/j.envsoft.2016.04.030},
  pages     = {218 -- 228},
  year      = {2016},
  abstract  = {Environmental discharges have been traditionally designed by means of cost-intensive and time-consuming experimental studies. Some extensively validated models based on an integral approach have been often employed for water quality problems, as recommended by USEPA (i.e.: CORMIX). In this study, FLOW-3D is employed for a full 3D RANS modelling of two turbulent jet-to-crossflow cases, including free surface jet impingement. Results are compared to both physical modelling and CORMIX to better assess model performance. Turbulence measurements have been collected for a better understanding of turbulent diffusion's parameter sensitivity. Although both studied models are generally able to reproduce jet trajectory, jet separation downstream of the impingement has been reproduced only by RANS modelling. Additionally, concentrations are better reproduced by FLOW-3D when the proper turbulent Schmidt number is used. This study provides a recommendation on the selection of the turbulence model and the turbulent Schmidt number for future outfall structures design studies.},
  language  = {en}
}
@article{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Development of the interfacial air layer in the non-aerated region of high-velocity spillway flows: Instabilities growth, entrapped air and influence on the self-aeration onset},
  series = {International Journal of Multiphase Flow},
  volume    = {84},
  journal   = {International Journal of Multiphase Flow},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0301-9322},
  doi       = {10.1016/j.ijmultiphaseflow.2016.04.012},
  pages     = {66 -- 74},
  year      = {2016},
  abstract  = {Self-aeration is traditionally explained by the water turbulent boundary layer outer edge intersection with the free surface. This paper presents a discussion on the commonly accepted hypothesis behind the computation of the critical point of self-aeration in spillway flows and a new formulation is proposed based on the existence of a developing air flow over the free surface. Upstream of the inception point of self-aeration, some surface roughening has been often reported in previous studies which consequently implies some entrapped air transport and air-water flows coupling. Such air flow is proven in this study by presenting measured air velocities and computing the air boundary layer thickness for a 1V:2H smooth chute flow. Additionally, the growth rate of free surface waves has been analysed by means of Ultrasonic Sensors measurements, obtaining also the entrapped air concentration. High-speed camera imaging has been used for qualitative study of the flow perturbations.},
  language  = {en}
}
@article{RegerDoeringKuhnhenne2016,
  author    = {Reger, V. and D{\"o}ring, Bernd and Kuhnhenne, M.},
  title     = {Passive und aktive Maßnahmen zur Fl{\"a}chenk{\"u}hlung im Stahl(leicht)bau},
  series = {Bauingenieur},
  volume    = {91},
  journal   = {Bauingenieur},
  number    = {Jul/Aug},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  doi       = {10.37544/0005-6650-2016-07-08-63},
  pages     = {309 -- 316},
  year      = {2016},
  abstract  = {Mit steigenden D{\"a}mmstandards und h{\"o}heren Komfortanforderungen der Nutzer ger{\"a}t die Problematik der sommerlichen {\"U}berhitzung zunehmend in den Fokus. Um die {\"U}berhitzung m{\"o}glichst gering zu halten, sind Maßnahmen und L{\"o}sungen zu entwickeln, die den potenziellen K{\"u}hlbedarf eines Geb{\"a}udes vermeiden sowie reduzieren. Im Rahmen des europ{\"a}ischen Forschungsprojektes BATIMASS wurden Techniken untersucht, die die sommerliche Raumtemperatur ohne zus{\"a}tzliche K{\"u}hlung (passiv) oder aber mit energieeffizienter wasserbasierter Fl{\"a}chenk{\"u}hlung (aktiv) reduzieren und die besonders f{\"u}r Geb{\"a}ude in Stahl(leicht)bauweise geeignet sind. Daf{\"u}r wurde die Methodik der thermisch {\"a}quivalenten Decke weiterentwickelt, um das thermische Verhalten von Profilblechdecken in Geb{\"a}uden f{\"u}r beide L{\"o}sungsans{\"a}tze analysieren zu k{\"o}nnen. Dar{\"u}ber hinaus wurde der Einsatz von Phasenwechselmaterial (PCM) zur Steigerung der Speicherf{\"a}higkeit von leichten Decken mit besonders geringer thermischer Masse in Simulationen sowie im Labor untersucht und bewertet.},
  language  = {de}
}
@article{Uibel2016,
  author    = {Uibel, Thomas},
  title     = {Untersuchungen zum Spaltverhalten von Holzschrauben. Teil 1},
  series = {Bauen mit Holz},
  journal   = {Bauen mit Holz},
  number    = {10},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  pages     = {40 -- 42},
  year      = {2016},
  language  = {de}
}
@article{MoorkampPetersonUibel2016,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Mit guten Aussichten. Bericht {\"u}ber den Studiengang Holzingenieurwesen an der FH Aachen},
  series = {Bauen mit Holz},
  journal   = {Bauen mit Holz},
  number    = {5},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  pages     = {33 -- 36},
  year      = {2016},
  language  = {de}
}
@article{HoerenbaumLaumannProkop2016,
  author    = {H{\"o}renbaum, Christoph and Laumann, J{\"o}rg and Prokop, Ines},
  title     = {Zur Anwendung des Eurocode 3 Teil 1-2 f{\"u}r die Heißbemessung und Anregungen f{\"u}r dessen Novellierung},
  series = {Stahlbau},
  volume    = {85},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn GmbH},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.201610382},
  pages     = {429 -- 434},
  year      = {2016},
  abstract  = {Die Eurocodes werden bis zum Jahr 2020 im Europ{\"a}ischen Komitee f{\"u}r Normung (CEN), Technisches Komitee TC 250, {\"u}berarbeitet. In Vorbereitung auf die Eurocode-Novellierung haben engagierte Ingenieure im Rahmen der Initiative PraxisRegeln Bau (PRB) die f{\"u}r die praktische Anwendung h{\"a}ufig genutzten Teile des Eurocode 3 untersucht. Mit dem Ziel, die Praxistauglichkeit des Eurocode 3 f{\"u}r die Heißbemessung zu verbessern, wurden die bestehende Norm EN 1993 Teil 1-2 insbesondere in Bezug auf die Anwenderfreundlichkeit analysiert und Vorschl{\"a}ge f{\"u}r die europ{\"a}ische Novellierung erarbeitet. Die Analysen zeigen, dass durch Umstrukturierungen und durch die Einf{\"u}hrung von Tabellen die Verst{\"a}ndlichkeit und Anwenderfreundlichkeit der Regeln f{\"u}r die Heißbemessung bedeutend erh{\"o}ht werden k{\"o}nnen.},
  language  = {de}
}
@article{BungValero2016,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Optical flow estimation in aerated flows},
  series = {Journal of Hydraulic Research},
  volume    = {54},
  journal   = {Journal of Hydraulic Research},
  number    = {5},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/00221686.2016.1173600},
  pages     = {575 -- 580},
  year      = {2016},
  abstract  = {Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn-Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn-Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150.},
  language  = {en}
}
@article{LopesLeandroCarvalhoetal.2017,
  author    = {Lopes, Pedro and Leandro, Jorge and Carvalho, Rita F. and Bung, Daniel B.},
  title     = {Alternating skimming flow over a stepped spillway},
  series = {Environmental Fluid Mechanics},
  volume    = {17},
  journal   = {Environmental Fluid Mechanics},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1510},
  doi       = {10.1007/s10652-016-9484-x},
  pages     = {303 -- 322},
  year      = {2017},
  language  = {en}
}
@article{Hebel2017,
  author    = {Hebel, Christoph},
  title     = {Erfahrungen mit der RIN und aktuelle Weiterentwicklungen},
  series = {Straßenverkehrstechnik: Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  volume    = {61},
  journal   = {Straßenverkehrstechnik: Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  number    = {7},
  publisher = {Kirschbaum-Verlag},
  address   = {Bonn},
  issn      = {0039-2219},
  pages     = {443 -- 448},
  year      = {2017},
  language  = {de}
}
@article{Hoettges2017,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {QKan - Management of drainage system data with QGIS},
  series = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  volume    = {17},
  journal   = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  number    = {Article 13},
  pages     = {95 -- 100},
  year      = {2017},
  language  = {en}
}
@article{LaumannMainzKrahwinkel2017,
  author    = {Laumann, J{\"o}rg and Mainz, Stefan and Krahwinkel, Manuel},
  title     = {Traglastuntersuchungen an Koppelpfetten bei Biegung um die schwache Achse und Torsion},
  series = {Stahlbau},
  volume    = {86},
  journal   = {Stahlbau},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0038-9145},
  doi       = {10.1002/stab.201710544},
  pages     = {1005 -- 1016},
  year      = {2017},
  language  = {de}
}
@article{ValeroBung2017,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Artificial Neural Networks and pattern recognition for air-water flow velocity estimation using a single-tip optical fibre probe},
  series = {Journal of Hydro-environment Research},
  volume    = {19},
  journal   = {Journal of Hydro-environment Research},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1570-6443},
  doi       = {10.1016/j.jher.2017.08.004},
  pages     = {150 -- 159},
  year      = {2017},
  language  = {en}
}
@article{KerpenBungValeroetal.2017,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {Journal of Ocean University of China},
  volume    = {16},
  journal   = {Journal of Ocean University of China},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1993-5021},
  doi       = {10.1007/s11802-017-3355-z},
  pages     = {649 -- 654},
  year      = {2017},
  language  = {en}
}
@article{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Einsatz von Holzwerkstoffen in Fahrzeugstrukturen},
  series = {Bauen mit Holz},
  journal   = {Bauen mit Holz},
  number    = {3},
  publisher = {Bruderverlag},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  pages     = {32 -- 38},
  year      = {2017},
  language  = {de}
}
@article{KerresSiekmann2017,
  author    = {Kerres, Karsten and Siekmann, Marko},
  title     = {Wie kommuniziere ich prognosegest{\"u}tzte Instandhaltungsstrategien erfolgreich in politischen Entscheidungsgremien?},
  series = {3 R. Fachzeitschrift f{\"u}r sichere und effiziente Rohleitungssysteme},
  journal   = {3 R. Fachzeitschrift f{\"u}r sichere und effiziente Rohleitungssysteme},
  number    = {12},
  publisher = {Vulkan-Verl.},
  address   = {Essen},
  issn      = {2191-9798},
  pages     = {47 -- 51},
  year      = {2017},
  language  = {de}
}