@article{ElsenKraiss1999,
  author    = {Elsen, Ingo and Kraiss, Karl-Friedrich},
  title     = {System concept and realization of a scalable neurocomputing architecture},
  series = {Systems Analysis Modelling Simulation},
  volume    = {35},
  journal   = {Systems Analysis Modelling Simulation},
  number    = {4},
  publisher = {Gordon and Breach Science Publishers},
  address   = {Amsterdam},
  issn      = {0232-9298},
  pages     = {399 -- 419},
  year      = {1999},
  abstract  = {This paper describes the realization of a novel neurocomputer which is based on the concepts of a coprocessor. In contrast to existing neurocomputers the main interest was the realization of a scalable, flexible system, which is capable of computing neural networks of arbitrary topology and scale, with full independence of special hardware from the software's point of view. On the other hand, computational power should be added, whenever needed and flexibly adapted to the requirements of the application. Hardware independence is achieved by a run time system which is capable of using all available computing power, including multiple host CPUs and an arbitrary number of neural coprocessors autonomously. The realization of arbitrary neural topologies is provided through the implementation of the elementary operations which can be found in most neural topologies.},
  language  = {en}
}
@article{PrumeRaederTyholdtetal.2007,
  author    = {Prume, Klaus and Raeder, H. and Tyholdt, F. and Booij, W. E.},
  title     = {Taking piezoelectric microsystems from the laboratory to production / Raeder, H. ; Tyholdt, F. ; Booij, W. ; Calame, F. ; Ostbo, N. P. ; Bredesen, R. ; Prume, K. ; Rijnders, G. ; Muralt, P.},
  series = {Journal of Electroceramics. 19 (2007), H. 4},
  journal   = {Journal of Electroceramics. 19 (2007), H. 4},
  isbn      = {1385-3449},
  pages     = {357 -- 362},
  year      = {2007},
  language  = {en}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@inproceedings{RuettersWeinheimerBragard2018,
  author    = {R{\"u}tters, Ren{\´e} and Weinheimer, Marius and Bragard, Michael},
  title     = {Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659871},
  year      = {2018},
  language  = {en}
}
@inproceedings{HoegenDonckerRuetters2020,
  author    = {Hoegen, Anne von and Doncker, Rik W. De and R{\"u}tters, Ren{\´e}},
  title     = {Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware},
  series = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)},
  booktitle = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.23919/ICEMS50442.2020.9290928},
  pages     = {1117 -- 1122},
  year      = {2020},
  abstract  = {Control engineering theory is hard to grasp for undergraduates during the first semesters, as it deals with the dynamical behavior of systems also in combination with control strategies on an abstract level. Therefore, operational amplifier (OpAmp) processes are reasonable and very effective systems to connect mathematical description with actual system's behavior. In this paper, we present an experiment for a laboratory session in which an embedded system, driven by a LabVIEW human machine interface (HMI) via USB, controls the analog circuits.With this setup we want to show the possibility of firstly, analyzing a first order process and secondly, designing a P-and PI-controller. Thereby, the theory of control engineering is always applied to the empirical results in order to break down the abstract level for the students.},
  language  = {en}
}
@article{FerreinSteinbauerMcPhillipsetal.2009,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Niem{\"u}ller, Tim and Potgieter, Anet},
  title     = {Team Zadeat 2009 : team report},
  volume    = {6},
  pages     = {1},
  year      = {2009},
  language  = {en}
}
@article{FerreinNiemuellerSteinbauer2010,
  author    = {Ferrein, Alexander and Niem{\"u}ller, Tim and Steinbauer, Gerald},
  title     = {Team Zadeat 2010 : application for participation},
  pages     = {5 Seiten},
  year      = {2010},
  language  = {en}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@inproceedings{LeiseAltherrPelz2018,
  author    = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.},
  title     = {Technical Operations Research (TOR) - Algorithms, not Engineers, Design Optimal Energy Efficient and Resilient Cooling Systems},
  series = {FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems},
  booktitle = {FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems},
  pages     = {1 -- 12},
  year      = {2018},
  abstract  = {The overall energy efficiency of ventilation systems can be improved by considering not only single components, but by considering as well the interplay between every part of the system. With the help of the method "TOR" ("Technical Operations Research"), which was developed at the Chair of Fluid Systems at TU Darmstadt, it is possible to improve the energy efficiency of the whole system by considering all possible design choices programmatically. We show the ability of this systematic design approach with a ventilation system for buildings as a use case example. Based on a Mixed-Integer Nonlinear Program (MINLP) we model the ventilation system. We use binary variables to model the selection of different pipe diameters. Multiple fans are model with the help of scaling laws. The whole system is represented by a graph, where the edges represent the pipes and fans and the nodes represents the source of air for cooling and the sinks, that have to be cooled. At the beginning, the human designer chooses a construction kit of different suitable fans and pipes of different diameters and different load cases. These boundary conditions define a variety of different possible system topologies. It is not possible to consider all topologies by hand. With the help of state of the art solvers, on the other side, it is possible to solve this MINLP. Next to this, we also consider the effects of malfunctions in different components. Therefore, we show a first approach to measure the resilience of the shown example use case. Further, we compare the conventional approach with designs that are more resilient. These more resilient designs are derived by extending the before mentioned model with further constraints, that consider explicitly the resilience of the overall system. We show that it is possible to design resilient systems with this method already in the early design stage and compare the energy efficiency and resilience of these different system designs.},
  language  = {en}
}
@article{SammBosetti1990,
  author    = {Samm, Doris and Bosetti, P.-C.},
  title     = {Testmessungen an einem grossflaechigen (Durchmesser 35 cm) Photomultiplier Test measurements of a large-area (diameter 35 cm) photomultiplier / Bosetti, P.-C.; ... Samm, D. [u.a.]},
  series = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 25 (1990), H. 1},
  journal   = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 25 (1990), H. 1},
  pages     = {33 -- 33},
  year      = {1990},
  language  = {en}
}
@article{SchollPelikanRepgesetal.1996,
  author    = {Scholl, Ingrid and Pelikan, Erich and Repges, Rudolf and Tolxdorff, Thomas},
  title     = {Texture-based feature extraction using the Wavelet transform on x rays.},
  series = {Medical Imaging 1996: Image Processing},
  journal   = {Medical Imaging 1996: Image Processing},
  pages     = {668 -- 678},
  year      = {1996},
  language  = {en}
}
@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}
@inproceedings{NiemuellerReuterEwertetal.2016,
  author    = {Niemueller, Tim and Reuter, Sebastian and Ewert, Daniel and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {The Carologistics Approach to Cope with the Increased Complexity and New Challenges of the RoboCup Logistics League 2015},
  series = {RoboCup 2015: Robot World Cup XIX},
  booktitle = {RoboCup 2015: Robot World Cup XIX},
  editor    = {Almeida, Luis},
  publisher = {Springer International Publishing},
  address   = {Cham},
  isbn      = {978-3-319-29339-4},
  doi       = {10.1007/978-3-319-29339-4_4},
  pages     = {47 -- 59},
  year      = {2016},
  language  = {en}
}
@inproceedings{NiemuellerEwertReuteretal.2013,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {The Carologistics RoboCup Logistics Team 2013},
  series = {RoboCup 2013 : Eindhoven},
  booktitle = {RoboCup 2013 : Eindhoven},
  organization    = {Robocup <2013, Eindhoven>},
  pages     = {1 -- 8},
  year      = {2013},
  language  = {en}
}
@article{HofmannLimpertMatareetal.2018,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Sch{\"o}nitz, Sebastian and Niemueller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {The Carologistics RoboCup Logistics Team 2018},
  year      = {2018},
  abstract  = {The Carologistics team participates in the RoboCup Logistics League for the seventh year. The RCLL requires precise vision, manipulation and path planning, as well as complex high-level decision making and multi-robot coordination. We outline our approach with an emphasis on recent modifications to those components. The team members in 2018 are David Bosen, Christoph Gollok, Mostafa Gomaa, Daniel Habering, Till Hofmann, Nicolas Limpert, Sebastian Sch{\"o}nitz, Morian Sonnet, Carsten Stoffels, and Tarik Viehmann. This paper is based on the last year's team description.},
  language  = {en}
}
@article{SchmidtForkmannSinkeetal.2016,
  author    = {Schmidt, K. and Forkmann, K. and Sinke, C. and Gratz, M. and Bitz, Andreas and Bingel, U.},
  title     = {The differential effect of trigeminal vs. peripheral pain stimulation on visual processing and memory encoding is influenced by pain-related fear},
  series = {NeuroImage},
  volume    = {134},
  journal   = {NeuroImage},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1053-8119},
  doi       = {10.1016/j.neuroimage.2016.03.026},
  pages     = {386 -- 395},
  year      = {2016},
  abstract  = {Compared to peripheral pain, trigeminal pain elicits higher levels of fear, which is assumed to enhance the interruptive effects of pain on concomitant cognitive processes. In this fMRI study we examined the behavioral and neural effects of trigeminal (forehead) and peripheral (hand) pain on visual processing and memory encoding. Cerebral activity was measured in 23 healthy subjects performing a visual categorization task that was immediately followed by a surprise recognition task. During the categorization task subjects received concomitant noxious electrical stimulation on the forehead or hand. Our data show that fear ratings were significantly higher for trigeminal pain. Categorization and recognition performance did not differ between pictures that were presented with trigeminal and peripheral pain. However, object categorization in the presence of trigeminal pain was associated with stronger activity in task-relevant visual areas (lateral occipital complex, LOC), memory encoding areas (hippocampus and parahippocampus) and areas implicated in emotional processing (amygdala) compared to peripheral pain. Further, individual differences in neural activation between the trigeminal and the peripheral condition were positively related to differences in fear ratings between both conditions. Functional connectivity between amygdala and LOC was increased during trigeminal compared to peripheral painful stimulation. Fear-driven compensatory resource activation seems to be enhanced for trigeminal stimuli, presumably due to their exceptional biological relevance.},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {The double-LNN Calibration technique for scattering parameter measurements of microstrip devices},
  series = {Conference proceedings},
  journal   = {Conference proceedings},
  publisher = {NEXUS House},
  address   = {Kent},
  pages     = {343 -- 347},
  year      = {1995},
  language  = {en}
}
@inproceedings{KoellenspergerBragardPlumetal.2007,
  author    = {K{\"o}llensperger, P. and Bragard, Michael and Plum, T. and De Doncker, R. W.},
  title     = {The dual GCT : a new high-power device using optimized GCT technology},
  series = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA},
  booktitle = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-1260-0 (Online)},
  doi       = {10.1109/07IAS.2007.76},
  pages     = {358 -- 365},
  year      = {2007},
  language  = {en}
}
@article{KoellenspergerBragardPlumetal.2009,
  author    = {K{\"o}llensperger, P. and Bragard, Michael and Plum, T. and De Doncker, R. W.},
  title     = {The dual GCT : new high-power device using optimized GCT technology},
  series = {IEEE transactions on industry applications},
  volume    = {45},
  journal   = {IEEE transactions on industry applications},
  number    = {5},
  issn      = {0093-9994},
  doi       = {10.1109/TIA.2009.2027364},
  pages     = {1754 -- 1762},
  year      = {2009},
  language  = {en}
}
@inproceedings{WolfLenz2015,
  author    = {Wolf, Martin and Lenz, Laura L.},
  title     = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)},
  series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  publisher = {IEEE [u.a.]},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-4823-9},
  doi       = {10.1109/SeGAH.2014.7067089},
  pages     = {135 -- 142},
  year      = {2015},
  language  = {en}
}
@book{Huening2014,
  author    = {H{\"u}ning, Felix},
  title     = {The fundamentals of electrical engineering for mechatronics},
  publisher = {de Gruyter},
  address   = {Berlin},
  isbn      = {978-3-11-034991-7 (Druckausg.)},
  pages     = {IX, 208 S.},
  year      = {2014},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {The In-Fixture Calibration Procedure Line-Network-Network-LNN},
  series = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]},
  journal   = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]},
  publisher = {Reed Exhibition Companies},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-23-2},
  pages     = {500 -- 505},
  year      = {1992},
  language  = {en}
}
@article{HagemannStumpeWagneretal.1985,
  author    = {Hagemann, Hans-J{\"u}rgen and Stumpe, R. and Wagner, D. and B{\"a}uerle, D.},
  title     = {The influence of contact effects on the dielectric behavior of diffuse phase transitions. Stumpe, R.; Wagner, D.; B{\"a}uerle, D.; Hagemann, H. J.},
  series = {Ferroelectrics : the international journal devoted to the theoretical, experimental, and applied aspects of ferroelectrics and related materials / Letters section. 4 (1985)},
  journal   = {Ferroelectrics : the international journal devoted to the theoretical, experimental, and applied aspects of ferroelectrics and related materials / Letters section. 4 (1985)},
  isbn      = {0731-5171},
  pages     = {143 -- 147},
  year      = {1985},
  language  = {en}
}
@inproceedings{BragardConradDeDoncker2010,
  author    = {Bragard, Michael and Conrad, M. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618410},
  pages     = {4551 -- 4557},
  year      = {2010},
  language  = {en}
}
@article{BragardConradvanHoeketal.2011,
  author    = {Bragard, Michael and Conrad, M. and van Hoek, H. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off},
  series = {IEEE transactions on industry applications},
  volume    = {47},
  journal   = {IEEE transactions on industry applications},
  number    = {5},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0093-9994},
  doi       = {10.1109/TIA.2011.2161432},
  pages     = {2175 -- 2182},
  year      = {2011},
  language  = {en}
}
@phdthesis{Bragard2012,
  author    = {Bragard, Michael},
  title     = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1152-4},
  pages     = {III, 164 S. : Ill., graph. Darst.},
  year      = {2012},
  abstract  = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.},
  language  = {en}
}
@article{FerreinSteinbauer2016,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {The Interplay of Aldebaran and RoboCup},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0440-1},
  pages     = {325 -- 326},
  year      = {2016},
  language  = {en}
}
@inproceedings{RuettersBragardDolls2024,
  author    = {R{\"u}tters, Ren{\´e} and Bragard, Michael and Dolls, Sarah},
  title     = {The Inverted Rotary Pendulum: Facilitating Practical Teaching in Advanced Control Engineering},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578937},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper outlines a practical approach to teach control engineering principles, with an inverted rotary pendulum, serving as an illustrative example. It shows how the pendulum is embedded in an advanced course of control engineering. This approach is incorporated into a flipped-classroom concept, as well as classical teaching concepts, offering students practical experience in control engineering. In addition, the design of the pendulum is shown, using a Raspberry Pi as the target platform for Matlab Simulink. This pendulum can be used in the classroom to evaluate the controller design mentioned above. It is analysed if the use of the pendulum generates a deeper understanding of the learning contents.},
  language  = {en}
}
@article{FassbenderBuehler2000,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {The join of a geographical situation display system and a platform independent C2 information system},
  series = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA},
  journal   = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA},
  pages     = {1 -- 7},
  year      = {2000},
  language  = {en}
}
@incollection{GligorevicEppleSchnell2011,
  author    = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael},
  title     = {The LDACS1 physical layer design},
  series = {Future aeronautical communications},
  booktitle = {Future aeronautical communications},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-307-625-6},
  pages     = {317 -- 332},
  year      = {2011},
  language  = {en}
}
@inproceedings{DowidatKoenigWolf2017,
  author    = {Dowidat, Linda and K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {The motivational competence developing game framework},
  series = {Mensch und Computer 2017 - Tagungsband},
  booktitle = {Mensch und Computer 2017 - Tagungsband},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Regensburg},
  doi       = {10.18420/muc2017-mci-0130},
  pages     = {15 -- 26},
  year      = {2017},
  abstract  = {Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This 'motivational Competence Developing Game Framework' demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.},
  language  = {en}
}
@article{HagemannLadeWarnieretal.1991,
  author    = {Hagemann, Hans-J{\"u}rgen and Lade, H. and Warnier, J. and Wiechert, D. U.},
  title     = {The performance of Depressed-Cladding Single-Mode Fibres with Different b/a Ratios. Hagemann, H.-J.; Lade, H.; Warnier, J.; Wiechert, D. U.},
  series = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 9 (1991), H. 6},
  journal   = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 9 (1991), H. 6},
  isbn      = {0733-8724},
  pages     = {689 -- 694},
  year      = {1991},
  language  = {en}
}
@inproceedings{BuxbaumHessRingbeck2001,
  author    = {Buxbaum, Bernd and Hess, Holger and Ringbeck, Thorsten},
  title     = {The photonic mixer device : new perspectives in optical wireless communication},
  series = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001},
  booktitle = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001},
  editor    = {Voges, Edgar},
  publisher = {Univ.},
  address   = {Dortmund},
  pages     = {(12)1 -- (12)5},
  year      = {2001},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {The pyramid assessment framework for 'competence developing games'},
  series = {Communications in Computer and Information Science},
  volume    = {618},
  booktitle = {Communications in Computer and Information Science},
  editor    = {Stephanidis, C.},
  publisher = {Springer},
  isbn      = {978-331940541-4},
  issn      = {1865-0929},
  doi       = {10.1007/978-3-319-40542-1_37},
  pages     = {232 -- 237},
  year      = {2016},
  language  = {en}
}
@inproceedings{NiemuellerLakemeyerFerrein2015,
  author    = {Niemueller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander},
  title     = {The RoboCup Logistics League as a Benchmark for Planning in Robotics},
  series = {Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015},
  booktitle = {Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015},
  editor    = {Finzi, Alberto},
  pages     = {63 -- 68},
  year      = {2015},
  language  = {en}
}
@article{WolfLuczakSpringeretal.1997,
  author    = {Wolf, Martin and Luczak, Holger and Springer, J. and Simon, S.},
  title     = {The role of metaphors in computer supported cooperative work},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {191 -- 192},
  year      = {1997},
  language  = {en}
}
@inproceedings{FerreinSchifferKallweit2018,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan},
  title     = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe},
  series = {ROBOT 2017: Third Iberian Robotics Conference},
  booktitle = {ROBOT 2017: Third Iberian Robotics Conference},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-70836-2},
  doi       = {10.1007/978-3-319-70836-2_31},
  pages     = {370 -- 381},
  year      = {2018},
  language  = {en}
}
@article{LimpertWiesenFerreinetal.2019,
  author    = {Limpert, Nicolas and Wiesen, Patrick and Ferrein, Alexander and Kallweit, Stephan and Schiffer, Stefan},
  title     = {The ROSIN Project and its Outreach to South Africa},
  series = {R\&D Journal},
  volume    = {35},
  journal   = {R\&D Journal},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{WolfSchlickSpringer1997,
  author    = {Wolf, Martin and Schlick, Christopher and Springer, J.},
  title     = {The use of implicit communication mechanisms in desktop-teleconferencing-systems},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {193 -- 194},
  year      = {1997},
  language  = {en}
}
@inproceedings{KoenigVoelkerWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and V{\"o}lker, Veronika and Wolf, Martin},
  title     = {The user-focused storybuilding framework for competence developing games - a design-framework considering the basics of an educational game's story},
  series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-616-3},
  pages     = {98 -- 106},
  year      = {2018},
  abstract  = {During the development of a Competence Developing Game's (CDG) story it is indispensable to understand the target audience. Thereby, CDGs stories represent more than just the plot. The Story is about the Setting, the Characters and the Plot. As a toolkit to support the development of such a story, this paper introduces the UserFocused Storybuilding (short UFoS) Framework for CDGs. The Framework and its utilization will be explained, followed by a description of its development and derivation, including an empirical study. In addition, to simplify the Framework use regarding the CDG's target audience, a new concept of Nine Psychographic Player Types will be explained. This concept of Player Types provides an approach to handle the differences in between players during the UFoS Framework use. Thereby, this article presents a unique approach to the development of target group-differentiated CDGs stories.},
  language  = {en}
}
@article{HagemannHeroGonser1980,
  author    = {Hagemann, Hans-J{\"u}rgen and Hero, A. and Gonser, U.},
  title     = {The valence change of Fe in BaTiO3 studied by M{\"o}ßbauer effect and gravimetry. Hagemann, H. J.; Hero, A.; Gonser, U.},
  series = {Physica Status Solidi (A) - Applied Research. 61 (1980)},
  journal   = {Physica Status Solidi (A) - Applied Research. 61 (1980)},
  isbn      = {0031-8965},
  pages     = {63 -- 72},
  year      = {1980},
  language  = {en}
}
@incollection{GoeckelSchifferWagneretal.2015,
  author    = {Goeckel, Tom and Schiffer, Stefan and Wagner, Hermann and Lakemeyer, Gerhard},
  title     = {The Video Conference Tool Robot ViCToR},
  series = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  booktitle = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  publisher = {Springer},
  isbn      = {978-3-319-22876-1},
  doi       = {10.1007/978-3-319-22876-1_6},
  pages     = {61 -- 73},
  year      = {2015},
  abstract  = {We present a robotic tool that autonomously follows a conversation to enable remote presence in video conferencing. When humans participate in a meeting with the help of video conferencing tools, it is crucial that they are able to follow the conversation both with acoustic and visual input. To this end, we design and implement a video conferencing tool robot that uses binaural sound source localization as its main source to autonomously orient towards the currently talking speaker. To increase robustness of the acoustic cue against noise we supplement the sound localization with a source detection stage. Also, we include a simple onset detector to retain fast response times. Since we only use two microphones, we are confronted with ambiguities on whether a source is in front or behind the device. We resolve these ambiguities with the help of face detection and additional moves. We tailor the system to our target scenarios in experiments with a four minute scripted conversation. In these experiments we evaluate the influence of different system settings on the responsiveness and accuracy of the device.},
  language  = {en}
}
@article{SchoppBritunVoracetal.2019,
  author    = {Schopp, Christoph and Britun, Nikolay and Vorac, Jan and Synek, Petr and Snyders, Rony and Heuermann, Holger},
  title     = {Thermal and Optical Study on the Frequency Dependence of an Atmospheric Microwave Argon Plasma Jet},
  series = {IEEE Transactions on Plasma Science},
  volume    = {47},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {7},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1939-9375},
  pages     = {3176 -- 3181},
  year      = {2019},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1995,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Thermal properties of C/H-, C/H/O-, C/H/N- and C/H/X-grown polycrystalline CVD diamond. P. K. Bachmann, H. J. Hagemann, H. Lade, ...},
  series = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  journal   = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  publisher = {Elsevier Science},
  address   = {New York, NY [u.a.]},
  pages     = {820 -- 826},
  year      = {1995},
  language  = {en}
}
@inproceedings{HessLuanSchwarteetal.2001,
  author    = {Hess, Holger and Luan, Xuming and Schwarte, Rudolf and Zhang, Zhigang and Xu, Zhanping and Heinol, Horst-Guenther and Buxbaum, Bernd and Ringbeck, Thorsten},
  title     = {Three-dimensional intelligent sensing based on the PMD technology},
  series = {Sensors, Systems, and Next-Generation Satellites V : 17 - 20 September 2001, Toulouse, France. - (SPIE proceedings series ; 4540)},
  booktitle = {Sensors, Systems, and Next-Generation Satellites V : 17 - 20 September 2001, Toulouse, France. - (SPIE proceedings series ; 4540)},
  editor    = {Fujisada, Hiroyuki},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-4265-8},
  issn      = {0038-7355},
  pages     = {482 -- 488},
  year      = {2001},
  language  = {en}
}
@article{KoehlerRoepkeWolf2021,
  author    = {K{\"o}hler, Klemens and R{\"o}pke, Ren{\´e} and Wolf, Martin},
  title     = {Through a mirror darkly - On the obscurity of teaching goals in game-based learning in IT security},
  series = {ISAGA 2019: Simulation Gaming Through Times and Disciplines},
  journal   = {ISAGA 2019: Simulation Gaming Through Times and Disciplines},
  publisher = {Springer},
  address   = {Cham},
  doi       = {10.1007/978-3-030-72132-9_6},
  pages     = {61 -- 73},
  year      = {2021},
  abstract  = {Teachers and instructors use very specific language communicating teaching goals. The most widely used frameworks of common reference are the Bloom's Taxonomy and the Revised Bloom's Taxonomy. The latter provides distinction of 209 different teaching goals which are connected to methods. In Competence Developing Games (CDGs - serious games to convey knowledge) and in IT security education, a two- or three level typology exists, reducing possible learning outcomes to awareness, training, and education. This study explores whether this much simpler framework succeeds in achieving the same range of learning outcomes. Method wise a keyword analysis was conducted. The results were threefold: 1. The words used to describe teaching goals in CDGs on IT security education do not reflect the whole range of learning outcomes. 2. The word choice is nevertheless different from common language, indicating an intentional use of language. 3. IT security CDGs use different sets of terms to describe learning outcomes, depending on whether they are awareness, training, or education games. The interpretation of the findings is that the reduction to just three types of CDGs reduces the capacity to communicate and think about learning outcomes and consequently reduces the outcomes that are intentionally achieved.},
  language  = {en}
}
@article{OrzadaMaderwaldPoseretal.2012,
  author    = {Orzada, S. and Maderwald, S. and Poser, B. A. and Johst, S. and Kannengiesser, S. and Ladd, M. E. and Bitz, Andreas},
  title     = {Time-interleaved acquisition of modes: an analysis of SAR and image contrast implications},
  series = {Magnetic Resonance in Medicine},
  volume    = {67},
  journal   = {Magnetic Resonance in Medicine},
  number    = {4},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.23081},
  pages     = {1033 -- 1041},
  year      = {2012},
  abstract  = {s the magnetic field strength and therefore the operational frequency in MRI are increased, the radiofrequency wavelength approaches the size of the human head/body, resulting in wave effects which cause signal decreases and dropouts. Especially, whole-body imaging at 7 T and higher is therefore challenging. Recently, an acquisition scheme called time-interleaved acquisition of modes has been proposed to tackle the inhomogeneity problems in high-field MRI. The basic premise is to excite two (or more) different Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-1 modes using static radiofrequency shimming in an interleaved acquisition, where the complementary radiofrequency patterns of the two modes can be exploited to improve overall signal homogeneity. In this work, the impact of time-interleaved acquisition of mode on image contrast as well as on time-averaged specific absorption rate is addressed in detail. Time-interleaved acquisition of mode is superior in Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-2 homogeneity compared with conventional radiofrequency shimming while being highly specific absorption rate efficient. Time-interleaved acquisition of modes can enable almost homogeneous high-field imaging throughout the entire field of view in PD, T2, and T2*-weighted imaging and, if a specified homogeneity criterion is met, in T1-weighted imaging as well.},
  language  = {en}
}
@inproceedings{RingbeckAlbrechtFreyetal.2003,
  author    = {Ringbeck, Thorsten and Albrecht, M. and Frey, J. and [u.a.],},
  title     = {Time-of-Flight 3D-camera for autonomous navigation and industrial automation},
  series = {Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA},
  booktitle = {Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA},
  editor    = {Lerch, Reinhard},
  edition   = {CD-ROM-Ausg.},
  publisher = {AMA Service},
  address   = {Wunstorf/Germany},
  year      = {2003},
  language  = {en}
}
@inproceedings{EllerwegRitz2008,
  author    = {Ellerweg, Roland and Ritz, Thomas},
  title     = {Tool supported requirements analysis for the user centered development of mobile enterprise software},
  series = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  booktitle = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  editor    = {Roth, J{\"o}rg},
  publisher = {IADIS Press},
  address   = {[Lisboa]},
  isbn      = {978-972-8924-62-1},
  pages     = {160 -- 162},
  year      = {2008},
  abstract  = {A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.},
  language  = {en}
}
@inproceedings{SchaenzleAltherrEdereretal.2015,
  author    = {Sch{\"a}nzle, Christian and Altherr, Lena and Ederer, Thorsten and Pelz, Peter},
  title     = {TOR - Towards the energetically optimal ventilation system},
  pages     = {1 Seite},
  year      = {2015},
  language  = {en}
}