@article{HagemannGeittner1990,
  author    = {Hagemann, Hans-J{\"u}rgen and Geittner, P.},
  title     = {PCVD hybrid technology for single mode fibres. Hagemann, H. J.; Geittner, P.},
  series = {Proceedings : papers presented at: the 8th Annual European Fibre Optic Communications and Local Area Networks Exposition},
  journal   = {Proceedings : papers presented at: the 8th Annual European Fibre Optic Communications and Local Area Networks Exposition},
  pages     = {67 -- 72},
  year      = {1990},
  language  = {en}
}
@article{HagemannCassidy1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Cassidy, Wiliam D.},
  title     = {Diamond growth rates and quality: dependence on gas phase cpmposition / William D. Cassidy [...], Hans-Jurgen Hagemann},
  series = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ....},
  journal   = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ....},
  address   = {Pittsburgh, Penn. ,},
  isbn      = {1-55899-239-1},
  pages     = {285 -- 291},
  year      = {1994},
  language  = {en}
}
@article{HagemannBreitschuhGraberetal.2004,
  author    = {Hagemann, Hans-J{\"u}rgen and Breitschuh, S. and Graber, S. and Schmitz, G{\"u}nter},
  title     = {Internet Laboratory Courses with Remote Access and Control of Real Measurements on Sensors and Electronic Components},
  series = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [APS - European Centre for Mechatronics]. P. Drews (ed.)},
  journal   = {Mechatronics \& Robotics 2004 : Aachen, Germany, September 13 - 15, 2004 / [APS - European Centre for Mechatronics]. P. Drews (ed.)},
  publisher = {Eysoldt},
  address   = {Aachen},
  isbn      = {3-938153-30-X},
  pages     = {1280 -- 1284},
  year      = {2004},
  language  = {en}
}
@article{HagemannBackhausGoessner2002,
  author    = {Hagemann, Hans-J{\"u}rgen and Backhaus, U. and Goessner, S.},
  title     = {Collaborative eLearning Concepts for University Level Online Laboratory Courses in Engineering. U. Backhaus, S. Goessner, H. J. Hagemann},
  series = {Proceedings Online Educa Berlin: 8th International Conference on Technology Supported Learning \& Training. 2002},
  journal   = {Proceedings Online Educa Berlin: 8th International Conference on Technology Supported Learning \& Training. 2002},
  pages     = {62 -- 66},
  year      = {2002},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P.K. and Lade, H. and Leers, D.},
  title     = {CVD Diamond Growth: Gas Compositions and Film Properties / P.K. Bachmann, H.J. Hagemann, H. Lade, D. Leers, D.U. Wiechert and H. Wilson},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...},
  publisher = {International Communications Specialists},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P.K. and Lade, H. and Leers, D.},
  title     = {Diamond chemical vapor deposition: gas compositions and film properties / Bachmann, P.K.; Hagemann, H.-J.; Lade, H; Leers, D.; Picht, F.; Wiechert, D.U.; Wilson, H.},
  series = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ...},
  journal   = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ...},
  address   = {Pittsburgh, Penn.},
  isbn      = {1-55899-239-1},
  pages     = {267 -- 277},
  year      = {1994},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1995,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Thermal properties of C/H-, C/H/O-, C/H/N- and C/H/X-grown polycrystalline CVD diamond. P. K. Bachmann, H. J. Hagemann, H. Lade, ...},
  series = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  journal   = {Diamond and Related Material. Vol 4. (1995), H. Issue 5-6},
  publisher = {Elsevier Science},
  address   = {New York, NY [u.a.]},
  pages     = {820 -- 826},
  year      = {1995},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Influence of the gas phase on diamond deposition and diamond properties. Bachmann, P. K.; Hagemann, H.J.; Lade, H.; Leers, D.; Picht, F.; Wiechert, D. U.},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  publisher = {International Communications Specialists, Inc.},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{Hagemann2003,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {INGMEDIA - Lernsoftware f{\"u}r technische und physikalische Praktika in Ingenieurstudieng{\"a}ngen},
  series = {E-Learning : Tagungsband ; NMB-Projekte in den Ingenieurwissenschaften ; Workshop der ingenieurwissenschaftlichen Projekte im bmb+f-F{\"o}rderprogramm "Neue Medien in der Bildung" am 25. und 26. Juni 2003 an der Hochschule Anhalt in Dessau / Hrsg.: Stephan Pi},
  journal   = {E-Learning : Tagungsband ; NMB-Projekte in den Ingenieurwissenschaften ; Workshop der ingenieurwissenschaftlichen Projekte im bmb+f-F{\"o}rderprogramm "Neue Medien in der Bildung" am 25. und 26. Juni 2003 an der Hochschule Anhalt in Dessau / Hrsg.: Stephan Pi},
  publisher = {Hochschule Anhalt},
  address   = {Dessau},
  pages     = {64 -- 69},
  year      = {2003},
  language  = {de}
}
@article{Hagemann2004,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {INGMEDIA - E-Learning f{\"u}r Laborpraktika},
  series = {Evaluation von E-Learning : Zielrichtungen, methodologische Aspekte, Zukunftsperspektiven / Dorothee M. Meister ... (Hrsg.)},
  journal   = {Evaluation von E-Learning : Zielrichtungen, methodologische Aspekte, Zukunftsperspektiven / Dorothee M. Meister ... (Hrsg.)},
  publisher = {Waxmann},
  address   = {M{\"u}nster [u.a.]},
  isbn      = {3-8309-1311-7},
  pages     = {217 -- 222},
  year      = {2004},
  language  = {de}
}
@article{Hagemann1978,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Loss mechanisms and domain stabilization in doped BaTiO₃},
  series = {Journal of Physics C: Solid State Physics},
  volume    = {11},
  journal   = {Journal of Physics C: Solid State Physics},
  number    = {15},
  publisher = {n.a.},
  address   = {London},
  isbn      = {0022-3719},
  doi       = {10.1088/0022-3719/11/15/031},
  pages     = {3333 -- 3344},
  year      = {1978},
  language  = {en}
}
@article{Hagemann1978,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Electrical properties of acceptor-doped BaTiO3 ceramic. Hagemann, H. J.},
  series = {Berichte der Deutschen Keramischen Gesellschaft. 55 (1978)},
  journal   = {Berichte der Deutschen Keramischen Gesellschaft. 55 (1978)},
  isbn      = {0365-9542},
  pages     = {353 -- 355},
  year      = {1978},
  language  = {en}
}
@article{Hagemann1978,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Reduction of hysteresis losses of ferroelectric BaTiO3. Hagemann, H. J.},
  series = {Ferroelectrics. 22 (1978)},
  journal   = {Ferroelectrics. 22 (1978)},
  isbn      = {0015-0193},
  pages     = {743 -- 743},
  year      = {1978},
  language  = {en}
}
@book{Hagemann1980,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Akzeptorionen in BaTiO3 und SrTiO3 und ihre Auswirkungen auf die Eigenschaften von Titanatkeramiken},
  pages     = {IX, 145 S. : zahlr. graph. Darst.},
  year      = {1980},
  language  = {de}
}
@article{Hagemann1989,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {St{\"o}rstellengleichgewichte in eisendotierten Titanaten. Hagemann, H. J.},
  series = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)},
  journal   = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)},
  pages     = {170 -- 172},
  year      = {1989},
  language  = {de}
}
@inproceedings{HagebeukerRingbeckFrydlewiczetal.2007,
  author    = {Hagebeuker, Bianca and Ringbeck, Thorsten and Frydlewicz, Paul and Jesorsky, Oliver and S{\"u}nkel, Thomas},
  title     = {PMD-Sensoren als Schl{\"u}sselkomponenten f{\"u}r die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums},
  series = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  booktitle = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  editor    = {Grote, Caspar},
  publisher = {WEKA-Fachzeitschr.-Verl.},
  address   = {Poing},
  pages     = {287 -- 296},
  year      = {2007},
  language  = {en}
}
@article{HagebeukerLangeRingbeck2004,
  author    = {Hagebeuker, Bianca and Lange, Robert and Ringbeck, Thorsten},
  title     = {Bildverarbeitung mit der dritten Dimension : wenn die Pixel auch Laufzeiten auswerten},
  series = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  journal   = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  publisher = {Rek \& Thomas},
  address   = {St. Gallen},
  issn      = {0179-9592},
  pages     = {11 -- 17},
  year      = {2004},
  language  = {de}
}
@inproceedings{HadinejadMahramGligorevicRitscher2002,
  author    = {Hadinejad-Mahram, Hafez and Gligorevic, Snjezana and Ritscher, Matthias},
  title     = {Joint iterative channel estimation and parallel interference cancellation for coded DS-CDMA},
  series = {Proceeding of the International Conference on Telecommunications 2002 : [Beijing, 23 - 26 June 2002]. Vol. 2},
  booktitle = {Proceeding of the International Conference on Telecommunications 2002 : [Beijing, 23 - 26 June 2002]. Vol. 2},
  organization    = {Institute of Electrical and Electronics Engineers},
  pages     = {566 -- 570},
  year      = {2002},
  language  = {en}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@book{GunnarBartonBeigeletal.2017,
  author    = {Gunnar, Auth and Barton, Thomas and Beigel, Stefan and Bensberg, Frank and Brehm, Lars and Wolf, Martin},
  title     = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {297 Seiten},
  year      = {2017},
  language  = {de}
}
@article{GspandlPillReipetal.2011,
  author    = {Gspandl, Stephan and Pill, Ingo and Reip, Michael and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Belief Management for High-Level Robot Programs},
  series = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  journal   = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  pages     = {900 -- 905},
  year      = {2011},
  language  = {en}
}
@inproceedings{GrundAltherr2023,
  author    = {Grund, Raphael M. and Altherr, Lena},
  title     = {Development of an open source energy disaggregation tool for the home automation platform Home Assistant},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.02},
  pages     = {11 -- 20},
  year      = {2023},
  abstract  = {In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.},
  language  = {en}
}
@inproceedings{GrothofSchwarteBuxbaumetal.2002,
  author    = {Grothof, M. and Schwarte, Rudolf and Buxbaum, Bernd and Ringbeck, Thorsten and [u.a.],},
  title     = {Product monitoring with MSM-PMD-Array},
  series = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  booktitle = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  editor    = {Wagner, Elmar},
  publisher = {AMA Service GmbH},
  address   = {Wunsdorf},
  pages     = {41 -- 47},
  year      = {2002},
  language  = {en}
}
@book{GromovHuening2015,
  author    = {Gromov, Viacheslav and H{\"u}ning, Felix},
  title     = {Schnelleinstieg mit dem Renesas RL78/G14 Starter Kit},
  publisher = {Franzis},
  address   = {Poing},
  isbn      = {978-3-645-10157-8},
  pages     = {76 Seiten},
  year      = {2015},
  language  = {de}
}
@inproceedings{GranatHoefkenSchuba2017,
  author    = {Granat, Andreas and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Intrusion Detection of the ICS Protocol EtherCAT},
  pages     = {1 -- 5},
  year      = {2017},
  abstract  = {Control mechanisms like Industrial Controls Systems (ICS) and its subgroup SCADA (Supervisory Control and Data Acquisition) are a prerequisite to automate industrial processes. While protection of ICS on process management level is relatively straightforward - well known office IT security mechanisms can be used - protection on field bus level is harder to achieve as there are real-time and production requirements like 24x7 to consider. One option to improve security on field bus level is to introduce controls that help to detect and to react on attacks. This paper introduces an initial set of intrusion detection mechanisms for the field bus protocol EtherCAT. To this end existing Ethernet attack vectors including packet injection and man-in-the-middle attacks are tested in an EtherCAT environment, where they could interrupt the EtherCAT network and may even cause physical damage. Based on the signatures of such attacks, a preprocessor and new rule options are defined for the open source intrusion detection system Snort demonstrating the general feasibility of intrusion detection on field bus level.},
  language  = {en}
}
@misc{GollewskiLangeRingbecketal.2012,
  author    = {Gollewski, Torsten and Lange, Robert and Ringbeck, Thorsten and Hess, Holger and Buxbaum, Bernd},
  title     = {Verfahren und Vorrichtung zur Laufzeitsensitiven Messung eines Signals [Offenlegungsschrift / Europ{\"a}ische Patentschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  year      = {2012},
  language  = {de}
}
@incollection{GoeckelSchifferWagneretal.2015,
  author    = {Goeckel, Tom and Schiffer, Stefan and Wagner, Hermann and Lakemeyer, Gerhard},
  title     = {The Video Conference Tool Robot ViCToR},
  series = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  booktitle = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  publisher = {Springer},
  isbn      = {978-3-319-22876-1},
  doi       = {10.1007/978-3-319-22876-1_6},
  pages     = {61 -- 73},
  year      = {2015},
  abstract  = {We present a robotic tool that autonomously follows a conversation to enable remote presence in video conferencing. When humans participate in a meeting with the help of video conferencing tools, it is crucial that they are able to follow the conversation both with acoustic and visual input. To this end, we design and implement a video conferencing tool robot that uses binaural sound source localization as its main source to autonomously orient towards the currently talking speaker. To increase robustness of the acoustic cue against noise we supplement the sound localization with a source detection stage. Also, we include a simple onset detector to retain fast response times. Since we only use two microphones, we are confronted with ambiguities on whether a source is in front or behind the device. We resolve these ambiguities with the help of face detection and additional moves. We tailor the system to our target scenarios in experiments with a four minute scripted conversation. In these experiments we evaluate the influence of different system settings on the responsiveness and accuracy of the device.},
  language  = {en}
}
@inproceedings{GligorevicZierhutJostetal.2009,
  author    = {Gligorevic, Snjezana and Zierhut, R. and Jost, T. and Wang, Wei},
  title     = {Airport channel measurements at 5.2GHz},
  series = {3rd European Conference on Antennas and Propagation : (EuCAP) ; Berlin, Germany, 23 - 27 March 2009},
  booktitle = {3rd European Conference on Antennas and Propagation : (EuCAP) ; Berlin, Germany, 23 - 27 March 2009},
  organization    = {European Conference on Antennas and Propagation <3, 2009, Berlin>},
  isbn      = {978-1-4244-4753-4 ; 978-3-00-024573-2},
  pages     = {877 -- 881},
  year      = {2009},
  language  = {en}
}
@inproceedings{GligorevicSorger2002,
  author    = {Gligorevic, Snjezana and Sorger, Ulrich},
  title     = {A new approach to tracking time-variant channels},
  series = {Proceedings / 5th International Symposium on Wireless Personal Multimedia Communications : WPMC : October 27 - 30, 2002, Honolulu, Hawaii ; vol. 3},
  booktitle = {Proceedings / 5th International Symposium on Wireless Personal Multimedia Communications : WPMC : October 27 - 30, 2002, Honolulu, Hawaii ; vol. 3},
  organization    = {International Symposium on Wireless Personal Multimedia Communications <5, 2002, Honolulu>},
  isbn      = {0-7803-7442-8},
  issn      = {1347-6890},
  pages     = {1342 -- 1345},
  year      = {2002},
  language  = {en}
}
@inproceedings{GligorevicSchneckenburgerFranzenetal.2011,
  author    = {Gligorevic, Snjezana and Schneckenburger, N. and Franzen, N. and Schnell, Michael and M{\"u}ller, S. and G{\"u}nzel, H.},
  title     = {L-Band compatibility of LDACS1},
  series = {3rd CEAS Air and Space Conference, 24 - 28 October 2011, Venezia, Italy},
  booktitle = {3rd CEAS Air and Space Conference, 24 - 28 October 2011, Venezia, Italy},
  organization    = {European Air and Space Conference <3, 2011, Venezia>},
  pages     = {1 -- 8},
  year      = {2011},
  language  = {en}
}
@inproceedings{GligorevicPulini2010,
  author    = {Gligorevic, Snjezana and Pulini, Paola},
  title     = {Simplified airport surface channel model based on the WSSUS assumption},
  series = {2010 Integrated Communications, Navigation and Surveillance Conference (ICNS 2010) : Herndon, Virginia, USA, 11 - 13 May 2010},
  booktitle = {2010 Integrated Communications, Navigation and Surveillance Conference (ICNS 2010) : Herndon, Virginia, USA, 11 - 13 May 2010},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-7457-8},
  issn      = {2155-4943},
  pages     = {F2-1 -- F2-11},
  year      = {2010},
  language  = {en}
}
@inproceedings{GligorevicJostWalter2009,
  author    = {Gligorevic, Snjezana and Jost, T. and Walter, M.},
  title     = {Scatterer based airport surface channel model},
  series = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.},
  booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : DASC '09 ; 23 - 29 [i.e. 25 - 29] Oct. 2009, Orlando, Fla.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-4078-8},
  pages     = {4C2-1 -- 4C2-10},
  year      = {2009},
  language  = {en}
}
@incollection{GligorevicEppleSchnell2011,
  author    = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael},
  title     = {The LDACS1 physical layer design},
  series = {Future aeronautical communications},
  booktitle = {Future aeronautical communications},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-307-625-6},
  pages     = {317 -- 332},
  year      = {2011},
  language  = {en}
}
@inproceedings{GligorevicBrandesCosovicetal.2005,
  author    = {Gligorevic, Snjezana and Brandes, Sinja and Cosovic, I. and Schnell, Michael},
  title     = {B-VHF, ein 'Overlay'-System f{\"u}r die ATC Kommunikation im VHF Band},
  series = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  booktitle = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  publisher = {DGLR},
  address   = {Bonn},
  organization    = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth},
  pages     = {951 -- 958},
  year      = {2005},
  language  = {de}
}
@inproceedings{GligorevicBottSorger2004,
  author    = {Gligorevic, Snjezana and Bott, Rainer and Sorger, Ulrich},
  title     = {Equalization for multi-carrier systems in time-varying channels},
  series = {Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003},
  booktitle = {Multi-carrier spread-spectrum for future generation wireless systems : fourth international workshop, Germany, September 17-19, 2003},
  editor    = {Fazel, Khaled},
  isbn      = {1402018371},
  pages     = {251 -- 258},
  year      = {2004},
  language  = {en}
}
@inproceedings{Gligorevic2002,
  author    = {Gligorevic, Snjezana},
  title     = {Joint channel estimation and equalization for fast time-variant multipath channels},
  series = {Proceedings / 13th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications : PIMRC 2002 : Lisboa, Portugal, September 15 - 18, 2002},
  booktitle = {Proceedings / 13th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications : PIMRC 2002 : Lisboa, Portugal, September 15 - 18, 2002},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {0-7803-7589-0},
  pages     = {1127 -- 1130},
  year      = {2002},
  language  = {en}
}
@phdthesis{Gligorevic2004,
  author    = {Gligorevic, Snjezana},
  title     = {Entzerrung schnell zeitver{\"a}nderlicher Kan{\"a}le. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 747)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-374710-3},
  pages     = {VI, 121 S : graph. Darst.},
  year      = {2004},
  language  = {de}
}
@article{Gligorevic2008,
  author    = {Gligorevic, Snjezana},
  title     = {Joint channel estimation and equalisation of fast time-varying frequency-selective channels},
  series = {European transactions on telecommunications},
  volume    = {Vol. 19},
  journal   = {European transactions on telecommunications},
  number    = {Iss. 1},
  issn      = {1541-8251; 2161-3915; 1120-3862; 1124-318X},
  pages     = {1 -- 13},
  year      = {2008},
  language  = {en}
}
@article{Gligorevic2013,
  author    = {Gligorevic, Snjezana},
  title     = {Airport surface propagation channel in the C-Band: measurements and modeling},
  series = {IEEE transactions on antennas and propagation},
  volume    = {Vol. 61},
  journal   = {IEEE transactions on antennas and propagation},
  number    = {Iss. 9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-926x},
  pages     = {4792 -- 4802},
  year      = {2013},
  language  = {en}
}
@inproceedings{Gligorevic2013,
  author    = {Gligorevic, Snjezana},
  title     = {Stochastic modeling of non-stationary channels},
  series = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  booktitle = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4673-2187-7 ; 978-88-907018-1-8},
  pages     = {1677 -- 1681},
  year      = {2013},
  language  = {en}
}
@inproceedings{GebhardtRitzSiekmannetal.2014,
  author    = {Gebhardt, Andreas and Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Additive manufacturing businesses in the process chain of individualized mass products},
  series = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  booktitle = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  editor    = {Demmer, Axel},
  publisher = {Fraunhofer},
  address   = {Stuttgart},
  isbn      = {978-3-8396-9128-1 (E-Book)},
  year      = {2014},
  language  = {en}
}
@book{GalleyMinoggioSchubaetal.2016,
  author    = {Galley, Birgit and Minoggio, Ingo and Schuba, Marko and Bischoff, Barbara and H{\"o}fken, Hans-Wilhelm},
  title     = {Unternehmenseigene Ermittlungen : Recht - Kriminalistik - IT},
  publisher = {Erich Schmidt Verlag},
  address   = {Berlin},
  isbn      = {978-3-503-16531-5},
  pages     = {XIII, 372 S.},
  year      = {2016},
  language  = {de}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2017,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Videos versus still images: Asymmetric sensor pattern noise comparison on mobile phones},
  series = {Electronic Imaging},
  booktitle = {Electronic Imaging},
  publisher = {Society for Imaging Science and Technology},
  address   = {Springfield, Virginia},
  issn      = {2470-1173},
  doi       = {10.2352/ISSN.2470-1173.2017.7.MWSF-331},
  pages     = {100 -- 103},
  year      = {2017},
  abstract  = {Nowadays, the most employed devices for recoding videos or capturing images are undoubtedly the smartphones. Our work investigates the application of source camera identification on mobile phones. We present a dataset entirely collected by mobile phones. The dataset contains both still images and videos collected by 67 different smartphones. Part of the images consists in photos of uniform backgrounds, especially collected for the computation of the RSPN. Identifying the source camera given a video is particularly challenging due to the strong video compression. The experiments reported in this paper, show the large variation in performance when testing an highly accurate technique on still images and videos.},
  language  = {en}
}
@inproceedings{FuchsRitzStrauch2012,
  author    = {Fuchs, Britta and Ritz, Thomas and Strauch, Jakob},
  title     = {Usability of mobile applications : dissemination of usability engineering in small and medium enterprises},
  series = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  booktitle = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  editor    = {Obaidat, Mohammad S.},
  publisher = {SciTePress},
  address   = {[Lissabon]},
  isbn      = {978-989-8565-23-5},
  pages     = {272 -- 277},
  year      = {2012},
  language  = {en}
}
@article{FuchsRitz2011,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Absatzkan{\"a}le kaum verkn{\"u}pft},
  series = {IT-Mittelstand : IT-Business im Mittelstand},
  volume    = {2011},
  journal   = {IT-Mittelstand : IT-Business im Mittelstand},
  number    = {9},
  publisher = {Medienhaus-Verlag},
  address   = {Bergisch-Gladbach},
  pages     = {16},
  year      = {2011},
  language  = {de}
}
@inproceedings{FuchsRitz2014,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Usability for Blended Shopping - Solving Major Flaws by Applying Usability Engineering and Proven Integration Technologies},
  series = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  booktitle = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  isbn      = {978-989-758-043-7},
  doi       = {10.5220/0005113502160223},
  pages     = {216 -- 223},
  year      = {2014},
  language  = {en}
}
@article{FrankeStreckertBitzetal.2005,
  author    = {Franke, Helmut and Streckert, Joachim and Bitz, Andreas and Goeke, Johannes and Hansen, Volkert and Ringelstein, E. Bernd and Nattk{\"a}mper, Heiner and Galle, Hans-Joachim and St{\"o}gbauer, Florian},
  title     = {Effects of Universal Mobile Telecommunications System (UMTS) electromagnetic fields on the blood-brain barrier in vitro},
  series = {Radiation Research},
  volume    = {164},
  journal   = {Radiation Research},
  number    = {3},
  issn      = {1938-5404},
  doi       = {10.1667/RR3424.1},
  pages     = {258 -- 269},
  year      = {2005},
  language  = {en}
}
@article{FoltzSchneiderWolfetal.2008,
  author    = {Foltz, Christian and Schneider, Nicole and Wolf, Martin and Kausch, Bernhard and Schlick, Christopher and Luczak, Holger},
  title     = {Usability engineering},
  series = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  journal   = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  editor    = {Nagl, Manfred},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70552-9},
  doi       = {10.1007/978-3-540-70552-9_21},
  pages     = {527 -- 554},
  year      = {2008},
  language  = {en}
}
@inproceedings{FingerKhalsaKreyeretal.2019,
  author    = {Finger, Felix and Khalsa, R. and Kreyer, J{\"o}rg and Mayntz, Joscha and Braun, Carsten and Dahmann, Peter and Esch, Thomas and Kemper, Hans and Schmitz, O. and Bragard, Michael},
  title     = {An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.},
  language  = {en}
}