@article{DroopChenRadfordetal.2023, author = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia}, title = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy}, series = {Radiochimica Acta}, volume = {111}, journal = {Radiochimica Acta}, number = {10}, publisher = {De Gruyter}, address = {Berlin [u.a.]}, issn = {2193-3405}, doi = {10.1515/ract-2023-0144}, pages = {773 -- 779}, year = {2023}, abstract = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).}, language = {en} } @article{ElsenKraiss1999, author = {Elsen, Ingo and Kraiss, Karl-Friedrich}, title = {System concept and realization of a scalable neurocomputing architecture}, series = {Systems Analysis Modelling Simulation}, volume = {35}, journal = {Systems Analysis Modelling Simulation}, number = {4}, publisher = {Gordon and Breach Science Publishers}, address = {Amsterdam}, issn = {0232-9298}, pages = {399 -- 419}, year = {1999}, abstract = {This paper describes the realization of a novel neurocomputer which is based on the concepts of a coprocessor. In contrast to existing neurocomputers the main interest was the realization of a scalable, flexible system, which is capable of computing neural networks of arbitrary topology and scale, with full independence of special hardware from the software's point of view. On the other hand, computational power should be added, whenever needed and flexibly adapted to the requirements of the application. Hardware independence is achieved by a run time system which is capable of using all available computing power, including multiple host CPUs and an arbitrary number of neural coprocessors autonomously. The realization of arbitrary neural topologies is provided through the implementation of the elementary operations which can be found in most neural topologies.}, language = {en} } @book{SchubaLinnhoffPopienReichletal.1996, author = {Schuba, Marko and Linnhoff-Popien, Claudia and Reichl, Peter and Schuba, Marko}, title = {Systemprogrammierung : Skript zur Vorlesung an der RWTH Aachen / Otto Spaniol ...}, publisher = {Verl. der Augustinus-Buchh.}, address = {Aachen}, isbn = {3-86073-470-9}, pages = {VIII, 166 S. : graph. Darst.}, year = {1996}, language = {de} } @article{Alt1978, author = {Alt, Helmut}, title = {Tabellenfreie Berechnung der Einkommensteuer mit Hilfe des programmierbaren Taschenrechners}, series = {Elektrizit{\"a}tswirtschaft}, volume = {77}, journal = {Elektrizit{\"a}tswirtschaft}, publisher = {VWEW-Energieverlag}, address = {Frankfurt/Main}, issn = {0013-5496}, pages = {486 -- 489}, year = {1978}, language = {de} } @article{PrumeRaederTyholdtetal.2007, author = {Prume, Klaus and Raeder, H. and Tyholdt, F. and Booij, W. E.}, title = {Taking piezoelectric microsystems from the laboratory to production / Raeder, H. ; Tyholdt, F. ; Booij, W. ; Calame, F. ; Ostbo, N. P. ; Bredesen, R. ; Prume, K. ; Rijnders, G. ; Muralt, P.}, series = {Journal of Electroceramics. 19 (2007), H. 4}, journal = {Journal of Electroceramics. 19 (2007), H. 4}, isbn = {1385-3449}, pages = {357 -- 362}, year = {2007}, language = {en} } @book{AltSchumny1983, author = {Alt, Helmut and Schumny, Harald}, title = {Taschenrechnerarithmetik mit erh{\"o}hter Genauigkeit (TI-59/HP-41C) (Vieweg-Programmbibliothek Taschenrechner ; 2) / Helmut Alt ; Harald Schumny [Hrsg.]}, publisher = {Vieweg + Teubner}, address = {Wiesbaden}, isbn = {3-528-04229-X ; 978-3-322-91099-8 ; 978-3-528-04229-5}, pages = {III, 58 S.}, year = {1983}, language = {de} } @article{WolfFoltzKillichetal.2001, author = {Wolf, Martin R. and Foltz, Christian and Killich, Stephan and Schmidt, Ludger}, title = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger}, series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2}, journal = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2}, publisher = {-}, isbn = {0-8058-3608-X}, pages = {172 -- 176}, year = {2001}, language = {en} } @misc{Engels2009, author = {Engels, Elmar}, title = {Tastatur mit einem magnetisch sensitiven Element : Offenlegungsschrift : DE102007052146A1 ; Offenlegungstag: 07.05.2009}, publisher = {Deutsches Patent- und Markenamt}, address = {M{\"u}nchen}, pages = {12 S.}, year = {2009}, language = {de} } @misc{Engels2008, author = {Engels, Elmar}, title = {Tastatur mit gegen Manipulation gesch{\"u}tzten Tasten : Offenlegungsschrift : DE102006047331A1 ; Offenlegungstag: 10.04.2008}, publisher = {Deutsches Patent- und Markenamt}, address = {M{\"u}nchen}, pages = {11 S.}, year = {2008}, language = {de} } @inproceedings{RuettersWeinheimerBragard2018, author = {R{\"u}tters, Ren{\´e} and Weinheimer, Marius and Bragard, Michael}, title = {Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench}, series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)}, booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)}, isbn = {978-1-5386-6903-7}, doi = {10.1109/RTUCON.2018.8659871}, year = {2018}, language = {en} } @inproceedings{HoegenDonckerRuetters2020, author = {Hoegen, Anne von and Doncker, Rik W. De and R{\"u}tters, Ren{\´e}}, title = {Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware}, series = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)}, booktitle = {2020 23rd International Conference on Electrical Machines and Systems (ICEMS)}, publisher = {IEEE}, address = {New York, NY}, doi = {10.23919/ICEMS50442.2020.9290928}, pages = {1117 -- 1122}, year = {2020}, abstract = {Control engineering theory is hard to grasp for undergraduates during the first semesters, as it deals with the dynamical behavior of systems also in combination with control strategies on an abstract level. Therefore, operational amplifier (OpAmp) processes are reasonable and very effective systems to connect mathematical description with actual system's behavior. In this paper, we present an experiment for a laboratory session in which an embedded system, driven by a LabVIEW human machine interface (HMI) via USB, controls the analog circuits.With this setup we want to show the possibility of firstly, analyzing a first order process and secondly, designing a P-and PI-controller. Thereby, the theory of control engineering is always applied to the empirical results in order to break down the abstract level for the students.}, language = {en} } @article{FerreinSteinbauerMcPhillipsetal.2009, author = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Niem{\"u}ller, Tim and Potgieter, Anet}, title = {Team Zadeat 2009 : team report}, volume = {6}, pages = {1}, year = {2009}, language = {en} } @article{FerreinNiemuellerSteinbauer2010, author = {Ferrein, Alexander and Niem{\"u}ller, Tim and Steinbauer, Gerald}, title = {Team Zadeat 2010 : application for participation}, pages = {5 Seiten}, year = {2010}, language = {en} } @inproceedings{ZaehlTheisWolfetal.2023, author = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin R. and K{\"o}hler, Klemens}, title = {Teamwork in software development and what personality has to do with it - an overview}, series = {Virtual, Augmented and Mixed Reality}, booktitle = {Virtual, Augmented and Mixed Reality}, editor = {Chen, Jessie Y. C. and Fragomeni, Gino}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-35633-9 (Print)}, doi = {10.1007/978-3-031-35634-6_10}, pages = {130 -- 153}, year = {2023}, abstract = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.}, language = {en} } @inproceedings{LeiseAltherrPelz2018, author = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.}, title = {Technical Operations Research (TOR) - Algorithms, not Engineers, Design Optimal Energy Efficient and Resilient Cooling Systems}, series = {FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems}, booktitle = {FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems}, pages = {1 -- 12}, year = {2018}, abstract = {The overall energy efficiency of ventilation systems can be improved by considering not only single components, but by considering as well the interplay between every part of the system. With the help of the method "TOR" ("Technical Operations Research"), which was developed at the Chair of Fluid Systems at TU Darmstadt, it is possible to improve the energy efficiency of the whole system by considering all possible design choices programmatically. We show the ability of this systematic design approach with a ventilation system for buildings as a use case example. Based on a Mixed-Integer Nonlinear Program (MINLP) we model the ventilation system. We use binary variables to model the selection of different pipe diameters. Multiple fans are model with the help of scaling laws. The whole system is represented by a graph, where the edges represent the pipes and fans and the nodes represents the source of air for cooling and the sinks, that have to be cooled. At the beginning, the human designer chooses a construction kit of different suitable fans and pipes of different diameters and different load cases. These boundary conditions define a variety of different possible system topologies. It is not possible to consider all topologies by hand. With the help of state of the art solvers, on the other side, it is possible to solve this MINLP. Next to this, we also consider the effects of malfunctions in different components. Therefore, we show a first approach to measure the resilience of the shown example use case. Further, we compare the conventional approach with designs that are more resilient. These more resilient designs are derived by extending the before mentioned model with further constraints, that consider explicitly the resilience of the overall system. We show that it is possible to design resilient systems with this method already in the early design stage and compare the energy efficiency and resilience of these different system designs.}, language = {en} } @article{SiepmannSchuhKeil1997, author = {Siepmann, Thomas and Schuh, G. and Keil, M.}, title = {TELEflow - Eine Methode zum Reengineering von Prozessen in Wertsch{\"o}pfungsnetzwerken / Schuh, G.; Siepmann, Th.; Keil, M.}, series = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)}, journal = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)}, pages = {21 -- 24}, year = {1997}, language = {de} } @book{BenknerWeidenfeller2002, author = {Benkner, Thorsten and Weidenfeller, Hermann}, title = {Telekommunikationstechnik. Informations{\"u}bertragung und Netze}, publisher = {Schlembach}, address = {Weil der Stadt}, isbn = {3-935340-06-0}, pages = {XI, 485 S. : Ill., graph. Darst.}, year = {2002}, language = {de} } @incollection{CzarneckiBensberg2019, author = {Czarnecki, Christian and Bensberg, Frank}, title = {Telekommunikationsunternehmen, Anwendungssysteme f{\"u}r}, series = {Enzyklop{\"a}die der Wirtschaftsinformatik}, booktitle = {Enzyklop{\"a}die der Wirtschaftsinformatik}, publisher = {Gito}, address = {Berlin}, pages = {1 -- 3}, year = {2019}, language = {de} } @article{SammBosetti1990, author = {Samm, Doris and Bosetti, P.-C.}, title = {Testmessungen an einem grossflaechigen (Durchmesser 35 cm) Photomultiplier Test measurements of a large-area (diameter 35 cm) photomultiplier / Bosetti, P.-C.; ... Samm, D. [u.a.]}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 25 (1990), H. 1}, journal = {Verhandlungen der Deutschen Physikalischen Gesellschaft. 25 (1990), H. 1}, pages = {33 -- 33}, year = {1990}, language = {en} } @article{MuehlObolenski2004, author = {M{\"u}hl, Thomas and Obolenski, B.}, title = {Textilien und elektromagnetische Strahlung}, series = {Melliand-Textilberichte. 85 (2004), H. 3}, journal = {Melliand-Textilberichte. 85 (2004), H. 3}, isbn = {0341-0781}, pages = {190 -- 192}, year = {2004}, language = {de} } @article{SchollPelikanRepgesetal.1996, author = {Scholl, Ingrid and Pelikan, Erich and Repges, Rudolf and Tolxdorff, Thomas}, title = {Texture-based feature extraction using the Wavelet transform on x rays.}, series = {Medical Imaging 1996: Image Processing}, journal = {Medical Imaging 1996: Image Processing}, pages = {668 -- 678}, year = {1996}, language = {en} } @article{BragardSoltauThomasetal.2010, author = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.}, title = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems}, series = {IEEE transactions on power electronics}, volume = {25}, journal = {IEEE transactions on power electronics}, number = {12}, publisher = {IEEE}, address = {New York}, issn = {0885-8993}, doi = {10.1109/TPEL.2010.2085455}, pages = {3049 -- 3056}, year = {2010}, abstract = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.}, language = {en} } @inproceedings{NiemuellerReuterEwertetal.2016, author = {Niemueller, Tim and Reuter, Sebastian and Ewert, Daniel and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {The Carologistics Approach to Cope with the Increased Complexity and New Challenges of the RoboCup Logistics League 2015}, series = {RoboCup 2015: Robot World Cup XIX}, booktitle = {RoboCup 2015: Robot World Cup XIX}, editor = {Almeida, Luis}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-319-29339-4}, doi = {10.1007/978-3-319-29339-4_4}, pages = {47 -- 59}, year = {2016}, language = {en} } @inproceedings{NiemuellerEwertReuteretal.2013, author = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {The Carologistics RoboCup Logistics Team 2013}, series = {RoboCup 2013 : Eindhoven}, booktitle = {RoboCup 2013 : Eindhoven}, organization = {Robocup <2013, Eindhoven>}, pages = {1 -- 8}, year = {2013}, language = {en} } @article{HofmannLimpertMatareetal.2018, author = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Sch{\"o}nitz, Sebastian and Niemueller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard}, title = {The Carologistics RoboCup Logistics Team 2018}, year = {2018}, abstract = {The Carologistics team participates in the RoboCup Logistics League for the seventh year. The RCLL requires precise vision, manipulation and path planning, as well as complex high-level decision making and multi-robot coordination. We outline our approach with an emphasis on recent modifications to those components. The team members in 2018 are David Bosen, Christoph Gollok, Mostafa Gomaa, Daniel Habering, Till Hofmann, Nicolas Limpert, Sebastian Sch{\"o}nitz, Morian Sonnet, Carsten Stoffels, and Tarik Viehmann. This paper is based on the last year's team description.}, language = {en} } @article{SchmidtForkmannSinkeetal.2016, author = {Schmidt, K. and Forkmann, K. and Sinke, C. and Gratz, M. and Bitz, Andreas and Bingel, U.}, title = {The differential effect of trigeminal vs. peripheral pain stimulation on visual processing and memory encoding is influenced by pain-related fear}, series = {NeuroImage}, volume = {134}, journal = {NeuroImage}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1053-8119}, doi = {10.1016/j.neuroimage.2016.03.026}, pages = {386 -- 395}, year = {2016}, abstract = {Compared to peripheral pain, trigeminal pain elicits higher levels of fear, which is assumed to enhance the interruptive effects of pain on concomitant cognitive processes. In this fMRI study we examined the behavioral and neural effects of trigeminal (forehead) and peripheral (hand) pain on visual processing and memory encoding. Cerebral activity was measured in 23 healthy subjects performing a visual categorization task that was immediately followed by a surprise recognition task. During the categorization task subjects received concomitant noxious electrical stimulation on the forehead or hand. Our data show that fear ratings were significantly higher for trigeminal pain. Categorization and recognition performance did not differ between pictures that were presented with trigeminal and peripheral pain. However, object categorization in the presence of trigeminal pain was associated with stronger activity in task-relevant visual areas (lateral occipital complex, LOC), memory encoding areas (hippocampus and parahippocampus) and areas implicated in emotional processing (amygdala) compared to peripheral pain. Further, individual differences in neural activation between the trigeminal and the peripheral condition were positively related to differences in fear ratings between both conditions. Functional connectivity between amygdala and LOC was increased during trigeminal compared to peripheral painful stimulation. Fear-driven compensatory resource activation seems to be enhanced for trigeminal stimuli, presumably due to their exceptional biological relevance.}, language = {en} } @article{HeuermannSchiek1995, author = {Heuermann, Holger and Schiek, Burkhard}, title = {The double-LNN Calibration technique for scattering parameter measurements of microstrip devices}, series = {Conference proceedings}, journal = {Conference proceedings}, publisher = {NEXUS House}, address = {Kent}, pages = {343 -- 347}, year = {1995}, language = {en} } @inproceedings{KoellenspergerBragardPlumetal.2007, author = {K{\"o}llensperger, P. and Bragard, Michael and Plum, T. and De Doncker, R. W.}, title = {The dual GCT : a new high-power device using optimized GCT technology}, series = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA}, booktitle = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {978-1-4244-1260-0 (Online)}, doi = {10.1109/07IAS.2007.76}, pages = {358 -- 365}, year = {2007}, language = {en} } @article{KoellenspergerBragardPlumetal.2009, author = {K{\"o}llensperger, P. and Bragard, Michael and Plum, T. and De Doncker, R. W.}, title = {The dual GCT : new high-power device using optimized GCT technology}, series = {IEEE transactions on industry applications}, volume = {45}, journal = {IEEE transactions on industry applications}, number = {5}, issn = {0093-9994}, doi = {10.1109/TIA.2009.2027364}, pages = {1754 -- 1762}, year = {2009}, language = {en} } @inproceedings{WolfLenz2015, author = {Wolf, Martin R. and Lenz, Laura L.}, title = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)}, series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16}, booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16}, publisher = {IEEE [u.a.]}, address = {Piscataway, NJ}, isbn = {978-1-4799-4823-9}, doi = {10.1109/SeGAH.2014.7067089}, pages = {135 -- 142}, year = {2015}, language = {en} } @book{Huening2014, author = {H{\"u}ning, Felix}, title = {The fundamentals of electrical engineering for mechatronics}, publisher = {de Gruyter}, address = {Berlin}, isbn = {978-3-11-034991-7 (Druckausg.)}, pages = {IX, 208 S.}, year = {2014}, language = {en} } @article{HeuermannSchiek1992, author = {Heuermann, Holger and Schiek, Burkhard}, title = {The In-Fixture Calibration Procedure Line-Network-Network-LNN}, series = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]}, journal = {Conference proceedings : monday 6th to thursday 9th september 1993, Palacio de Congresos, Madrid, Spain ; [the international conference and exhibition designed for the Microwave Community]}, publisher = {Reed Exhibition Companies}, address = {Tunbridge Wells}, isbn = {0-946821-23-2}, pages = {500 -- 505}, year = {1992}, language = {en} } @article{HagemannStumpeWagneretal.1985, author = {Hagemann, Hans-J{\"u}rgen and Stumpe, R. and Wagner, D. and B{\"a}uerle, D.}, title = {The influence of contact effects on the dielectric behavior of diffuse phase transitions. Stumpe, R.; Wagner, D.; B{\"a}uerle, D.; Hagemann, H. J.}, series = {Ferroelectrics : the international journal devoted to the theoretical, experimental, and applied aspects of ferroelectrics and related materials / Letters section. 4 (1985)}, journal = {Ferroelectrics : the international journal devoted to the theoretical, experimental, and applied aspects of ferroelectrics and related materials / Letters section. 4 (1985)}, isbn = {0731-5171}, pages = {143 -- 147}, year = {1985}, language = {en} } @inproceedings{BragardConradDeDoncker2010, author = {Bragard, Michael and Conrad, M. and De Doncker, R. W.}, title = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off}, series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]}, booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4244-5286-6 (Print)}, doi = {10.1109/ECCE.2010.5618410}, pages = {4551 -- 4557}, year = {2010}, language = {en} } @article{BragardConradvanHoeketal.2011, author = {Bragard, Michael and Conrad, M. and van Hoek, H. and De Doncker, R. W.}, title = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off}, series = {IEEE transactions on industry applications}, volume = {47}, journal = {IEEE transactions on industry applications}, number = {5}, publisher = {IEEE}, address = {New York}, issn = {0093-9994}, doi = {10.1109/TIA.2011.2161432}, pages = {2175 -- 2182}, year = {2011}, language = {en} } @phdthesis{Bragard2012, author = {Bragard, Michael}, title = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-1152-4}, pages = {III, 164 S. : Ill., graph. Darst.}, year = {2012}, abstract = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.}, language = {en} } @article{FerreinSteinbauer2016, author = {Ferrein, Alexander and Steinbauer, Gerald}, title = {The Interplay of Aldebaran and RoboCup}, series = {KI - K{\"u}nstliche Intelligenz}, volume = {30}, journal = {KI - K{\"u}nstliche Intelligenz}, number = {3-4}, publisher = {Springer}, address = {Berlin}, issn = {1610-1987}, doi = {10.1007/s13218-016-0440-1}, pages = {325 -- 326}, year = {2016}, language = {en} } @inproceedings{RuettersBragardDolls2024, author = {R{\"u}tters, Ren{\´e} and Bragard, Michael and Dolls, Sarah}, title = {The Inverted Rotary Pendulum: Facilitating Practical Teaching in Advanced Control Engineering}, series = {2024 IEEE Global Engineering Education Conference (EDUCON)}, booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)}, publisher = {IEEE}, address = {New York, NY}, issn = {2165-9559}, doi = {10.1109/EDUCON60312.2024.10578937}, pages = {5 Seiten}, year = {2024}, abstract = {This paper outlines a practical approach to teach control engineering principles, with an inverted rotary pendulum, serving as an illustrative example. It shows how the pendulum is embedded in an advanced course of control engineering. This approach is incorporated into a flipped-classroom concept, as well as classical teaching concepts, offering students practical experience in control engineering. In addition, the design of the pendulum is shown, using a Raspberry Pi as the target platform for Matlab Simulink. This pendulum can be used in the classroom to evaluate the controller design mentioned above. It is analysed if the use of the pendulum generates a deeper understanding of the learning contents.}, language = {en} } @article{FassbenderBuehler2000, author = {Faßbender, Heinz and B{\"u}hler, Gerhard}, title = {The join of a geographical situation display system and a platform independent C2 information system}, series = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA}, journal = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA}, pages = {1 -- 7}, year = {2000}, language = {en} } @incollection{GligorevicEppleSchnell2011, author = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael}, title = {The LDACS1 physical layer design}, series = {Future aeronautical communications}, booktitle = {Future aeronautical communications}, publisher = {Intech}, address = {London}, isbn = {978-953-307-625-6}, pages = {317 -- 332}, year = {2011}, language = {en} } @inproceedings{DowidatKoenigWolf2017, author = {Dowidat, Linda and K{\"o}nig, Johannes Alexander and Wolf, Martin R.}, title = {The motivational competence developing game framework}, series = {Mensch und Computer 2017 - Tagungsband}, booktitle = {Mensch und Computer 2017 - Tagungsband}, publisher = {Gesellschaft f{\"u}r Informatik e.V.}, address = {Regensburg}, doi = {10.18420/muc2017-mci-0130}, pages = {15 -- 26}, year = {2017}, abstract = {Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This 'motivational Competence Developing Game Framework' demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.}, language = {en} } @article{HagemannLadeWarnieretal.1991, author = {Hagemann, Hans-J{\"u}rgen and Lade, H. and Warnier, J. and Wiechert, D. U.}, title = {The performance of Depressed-Cladding Single-Mode Fibres with Different b/a Ratios. Hagemann, H.-J.; Lade, H.; Warnier, J.; Wiechert, D. U.}, series = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 9 (1991), H. 6}, journal = {Journal of Lightwave Technology (J-LT) / Institute of Electrical and Electronics Engineers (IEEE). 9 (1991), H. 6}, isbn = {0733-8724}, pages = {689 -- 694}, year = {1991}, language = {en} } @inproceedings{BuxbaumHessRingbeck2001, author = {Buxbaum, Bernd and Hess, Holger and Ringbeck, Thorsten}, title = {The photonic mixer device : new perspectives in optical wireless communication}, series = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001}, booktitle = {International Workshop on Optical MEMS and Integrated Optics : Universit{\"a}t Dortmund, Universit{\"a}tskolleg Bommerholz, 11. \& 12. June 2001}, editor = {Voges, Edgar}, publisher = {Univ.}, address = {Dortmund}, pages = {(12)1 -- (12)5}, year = {2001}, language = {en} } @inproceedings{KoenigWolf2016, author = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.}, title = {The pyramid assessment framework for 'competence developing games'}, series = {Communications in Computer and Information Science}, volume = {618}, booktitle = {Communications in Computer and Information Science}, editor = {Stephanidis, C.}, publisher = {Springer}, isbn = {978-331940541-4}, issn = {1865-0929}, doi = {10.1007/978-3-319-40542-1_37}, pages = {232 -- 237}, year = {2016}, language = {en} } @inproceedings{NiemuellerLakemeyerFerrein2015, author = {Niemueller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander}, title = {The RoboCup Logistics League as a Benchmark for Planning in Robotics}, series = {Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015}, booktitle = {Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015}, editor = {Finzi, Alberto}, pages = {63 -- 68}, year = {2015}, language = {en} } @inproceedings{NiemuellerFerreinReuteretal.2015, author = {Niemueller, Tim and Ferrein, Alexander and Reuter, Sebastian and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {The RoboCup Logistics League as a Holistic Multi-Robot Smart Factory Benchmark}, series = {Proceedings of the IROS 2015 Open forum on evaluation of results, replication of experiments and benchmarking in robotics research}, booktitle = {Proceedings of the IROS 2015 Open forum on evaluation of results, replication of experiments and benchmarking in robotics research}, pages = {3 S.}, year = {2015}, abstract = {With autonomous mobile robots receiving increased attention in industrial contexts, the need for benchmarks becomes more and more an urgent matter. The RoboCup Logistics League (RCLL) is one specific industry-inspired scenario focusing on production logistics within a Smart Factory. In this paper, we describe how the RCLL allows to assess the performance of a group of robots within the scenario as a whole, focusing specifically on the coordination and cooperation strategies and the methods and components to achieve them. We report on recent efforts to analyze performance of teams in 2014 to understand the implications of the current grading scheme, and derived criteria and metrics for performance assessment based on Key Performance Indicators (KPI) adapted from classic factory evaluation. We reflect on differences and compatibility towards RoCKIn, a recent major benchmarking European project.}, language = {en} } @article{WolfLuczakSpringeretal.1997, author = {Wolf, Martin R. and Luczak, Holger and Springer, J. and Simon, S.}, title = {The role of metaphors in computer supported cooperative work}, series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /}, journal = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /}, editor = {Miyamoto, Hiroyuki}, publisher = {-}, address = {Tokyo}, pages = {191 -- 192}, year = {1997}, language = {en} } @inproceedings{FerreinSchifferKallweit2018, author = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan}, title = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe}, series = {ROBOT 2017: Third Iberian Robotics Conference}, booktitle = {ROBOT 2017: Third Iberian Robotics Conference}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-70836-2}, doi = {10.1007/978-3-319-70836-2_31}, pages = {370 -- 381}, year = {2018}, language = {en} } @article{LimpertWiesenFerreinetal.2019, author = {Limpert, Nicolas and Wiesen, Patrick and Ferrein, Alexander and Kallweit, Stephan and Schiffer, Stefan}, title = {The ROSIN Project and its Outreach to South Africa}, series = {R\&D Journal}, volume = {35}, journal = {R\&D Journal}, pages = {1 -- 6}, year = {2019}, language = {en} } @inproceedings{BooysenMathewKnoxetal.2015, author = {Booysen, Tracy and Mathew, Thomas and Knox, Greig and Fong, W. K. and St{\"u}ttgen, Marcel and Ferrein, Alexander and Steinbauer, Gerald}, title = {The Scarab Project}, series = {ICRA 2015 Developing Countries Forum}, booktitle = {ICRA 2015 Developing Countries Forum}, pages = {3 S.}, year = {2015}, abstract = {Urban Search and Rescue (USAR) is an active research field in the robotics community. Despite recent advances for many open research questions, these kind of systems are not widely used in real rescue missions. One reason is that such systems are complex and not (yet) very reliable; another is that one has to be an robotic expert to run such a system. Moreover, available rescue robots are very expensive and the benefits of using them are still limited. In this paper, we present the Scarab robot, an alternative design for a USAR robot. The robot is light weight, humanpackable and its primary purpose is that of extending the rescuer's capability to sense the disaster site. The idea is that a responder throws the robot to a certain spot. The robot survives the impact with the ground and relays sensor data such as camera images or thermal images to the responder's hand-held control unit from which the robot can be remotely controlled.}, language = {en} }