@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@inproceedings{GoemmelNiendorfFrauenrathetal.2010,
  author    = {G{\"o}mmel, Andreas and Niendorf, Thoralf and Frauenrath, Tobias and Otten, Mario and Butenweg, Christoph and Kob, Malte},
  title     = {3D vocal fold geometry mapping using Magnetic Resonance Imaging},
  series = {Fortschritte der Akustik : 36. Deutsche Jahrestagung f{\"u}r Akustik ; 15.-18. M{\"a}rz 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael M{\"o}ser ... Band 1},
  booktitle = {Fortschritte der Akustik : 36. Deutsche Jahrestagung f{\"u}r Akustik ; 15.-18. M{\"a}rz 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael M{\"o}ser ... Band 1},
  publisher = {Deutsche Gesellschaft f{\"u}r Akustik},
  address   = {Berlin},
  organization    = {Deutsche Jahrestagung f{\"u}r Akustik <36, 2010, Berlin>},
  isbn      = {978-3-9808659-8-2},
  pages     = {271 -- 272},
  year      = {2010},
  language  = {en}
}
@inproceedings{GoemmelKraemerButenwegetal.2005,
  author    = {G{\"o}mmel, Andreas and Kr{\"a}mer, Sebastian and Butenweg, Christoph and Kob, Malte},
  title     = {A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers},
  series = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  booktitle = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  publisher = {OPAKFI Tud. Egyes{\"u}let},
  address   = {Budapest},
  organization    = {Forum Acusticum <4, 2005, Budapest>},
  isbn      = {978-963-8241-68-9},
  pages     = {2759 -- 2764},
  year      = {2005},
  language  = {en}
}
@inproceedings{GoemmelKobNiendorfetal.2009,
  author    = {G{\"o}mmel, Andreas and Kob, Malte and Niendorf, Thoralf and Butenweg, Christoph},
  title     = {An approach for numerical calculation of glottal flow during glottal closure},
  series = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  booktitle = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  publisher = {DEGA},
  address   = {Berlin},
  organization    = {NAG DAGA <2009, Rotterdam>},
  isbn      = {978-3-9808659-6-8},
  pages     = {1722 -- 1725},
  year      = {2009},
  language  = {en}
}
@inproceedings{GoemmelFrauenrathOttenetal.2010,
  author    = {G{\"o}mmel, Andreas and Frauenrath, Tobias and Otten, Mario and Niendorf, Thoralf and Butenweg, Christoph},
  title     = {In-vivo measurements of vocal fold geometry using Magnetic Resonance Imaging},
  series = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin},
  booktitle = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin},
  editor    = {M{\"o}ser, Michael and Schulte-Fortkamp, Brgitte and Ochmann, Martin},
  publisher = {Deutsche Gesellschaft f{\"u}r Akustik},
  address   = {Berlin},
  isbn      = {978-3-9808659-8-2},
  year      = {2010},
  language  = {de}
}
@inproceedings{GoemmelButenwegKob2005,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Kob, Malte},
  title     = {Towards a complete finite-element model of human phonation: modeling phonatory maneuvers},
  series = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  booktitle = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  publisher = {Univ., Dep. of Orthodontics},
  address   = {Ulm},
  organization    = {Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields <12, 2005, Ulm>},
  isbn      = {978-3-9806183-8-0},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2007,
  author    = {G{\"o}mmel, A. and Butenweg, Christoph and Kob, M.},
  title     = {A fluid-structure interaction model of vocal fold oscillation},
  series = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  booktitle = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  isbn      = {978-888453674-7},
  pages     = {127 -- 128},
  year      = {2007},
  abstract  = {Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.},
  language  = {en}
}
@inproceedings{GrunendahldeRochefortButenweg2005,
  author    = {Grunendahl, A. and de Rochefort, E. and Butenweg, Christoph},
  title     = {Numerical models for investigating the causes of low back pain due to whole-body vibrations},
  series = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  booktitle = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  publisher = {IST Press},
  address   = {Lisbon},
  organization    = {International Conference on Computational Bioengineering <2, 2005, Lissabon>},
  isbn      = {978-972-8469-37-3},
  pages     = {905 -- 914},
  year      = {2005},
  language  = {en}
}
@phdthesis{Groebel2013,
  author    = {Groebel, Simone},
  title     = {Zusammensetzung der Bioz{\"o}nose der Methanbildung unter Anwendung molekularbiologischer Methoden : Auswahl und Immobilisierung eines prozesstragenden Organismus auf einem Biosensor mit dem Ziel der {\"U}berwachung der Prozessstabilit{\"a}t kommerzieller Biogasanlagen},
  publisher = {Univ.-Bibliothek},
  address   = {Rostock},
  year      = {2013},
  language  = {de}
}
@inproceedings{GorzalkaDahlkeGoettscheetal.2018,
  author    = {Gorzalka, Philip and Dahlke, Dennis and G{\"o}ttsche, Joachim and Israel, Martin and Patel, Dhruvkumar and Prahl, Christoph and Schmiedt, Jacob Estevam and Frommholz, Dirk and Hoffschmidt, Bernhard and Linkiewicz, Magdalena},
  title     = {Building Tomograph-From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input},
  series = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  booktitle = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  pages     = {17 Seiten},
  year      = {2018},
  language  = {en}
}
@incollection{GoldbachHochrein2011,
  author    = {Goldbach, Daniel and Hochrein, Ulrich},
  title     = {Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil},
  series = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3068-6},
  pages     = {175 -- 194},
  year      = {2011},
  language  = {de}
}
@inproceedings{GoldbachAment2010,
  author    = {Goldbach, Daniel and Ament, Christoph},
  title     = {Stabilized reversing with vehicle trailer combinations},
  series = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  booktitle = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  editor    = {Scharff, Peter},
  publisher = {Verl. ISLE},
  address   = {Ilmenau},
  organization    = {Technische Universit{\"a}t <Ilmenau> / Fakult{\"a}t f{\"u}r Informatik und Automatisierung},
  isbn      = {978-3-938843-53-6},
  pages     = {352 -- 357},
  year      = {2010},
  language  = {en}
}
@incollection{Goldbach2013,
  author    = {Goldbach, Daniel},
  title     = {Diagnosemaßnahmen in der funktionalen Sicherheit},
  series = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3221-5},
  pages     = {179 -- 198},
  year      = {2013},
  language  = {de}
}
@incollection{Goldbach2012,
  author    = {Goldbach, Daniel},
  title     = {Zuverl{\"a}ssigkeitsanalyse zur Verifikation der Einhaltung von quantitativen Sicherheitsanforderungen.},
  series = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3149-2},
  pages     = {116 -- 132},
  year      = {2012},
  language  = {de}
}
@inproceedings{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Management der funktionalen Sicherheit einer Entwicklung eines sicherheitskritischen Systems im Bereich Nutzfahrzeuge},
  series = {Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, Kaiserslautern / K. Berns ... (ed.)},
  booktitle = {Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, Kaiserslautern / K. Berns ... (ed.)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8322-9040-5},
  pages     = {487 -- 495},
  year      = {2010},
  language  = {de}
}
@book{Goldbach2009,
  author    = {Goldbach, Daniel},
  title     = {Zur Verbesserung des Fahrverhaltens von Zugfahrzeug-Anh{\"a}nger-Gespannen. (Fortschrittberichte VDI. Reihe 12, Verkehrstechnik, Fahrzeugtechnik ; Nr. 703)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-370312-8},
  pages     = {XII, 171 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@book{Goldbach2002,
  author    = {Goldbach, Daniel},
  title     = {Steuerung und Regelung der aktiven Anh{\"a}ngerkupplung eines Farhzeuggespanns},
  year      = {2002},
  language  = {de}
}
@inproceedings{Goldbach2014,
  author    = {Goldbach, Daniel},
  title     = {Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit},
  series = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  booktitle = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  editor    = {Wahl, Michael},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3580-8},
  pages     = {172 -- 179},
  year      = {2014},
  language  = {de}
}
@article{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes},
  series = {mechatronik mobil},
  volume    = {2},
  journal   = {mechatronik mobil},
  number    = {1},
  publisher = {Expert Verlag},
  address   = {Renningen},
  issn      = {1867-7371},
  pages     = {23 -- 29},
  year      = {2010},
  language  = {de}
}
@incollection{GkatzogiasVeljkovivPohorylesetal.2022,
  author    = {Gkatzogias, Konstantinos and Veljkoviv, Ana and Pohoryles, Daniel A. and Tsionis, Georgios and Bournas, Dionysios A. and Crowley, Helen and Norl{\´e}n, Hedvig and Butenweg, Christoph and Gervasio, Helena and Manfredi, Vincenzo and Masi, Angelo and Zaharieva, Roumiana},
  title     = {Policy practice and regional impact assessment for building renovation},
  series = {REEBUILD Integrated Techniques for the Seismic Strengthening \& Energy Efficiency of Existing Buildings},
  booktitle = {REEBUILD Integrated Techniques for the Seismic Strengthening \& Energy Efficiency of Existing Buildings},
  editor    = {Gkatzogias, Konstantinos and Tsionis, Georgios},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  isbn      = {978-92-76-60454-9},
  issn      = {1831-9424},
  doi       = {10.2760/883122},
  pages     = {1 -- 68},
  year      = {2022},
  abstract  = {The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent.},
  language  = {en}
}
@article{GiresiniSassuButenwegetal.2017,
  author    = {Giresini, Linda and Sassu, Mauro and Butenweg, Christoph and Alecci, Valerio and De Stefano, Mario},
  title     = {Vault macro-element with equivalent trusses in global seismic analyses},
  series = {Earthquakes and Structures},
  volume    = {12},
  journal   = {Earthquakes and Structures},
  number    = {4},
  publisher = {Techno-Press},
  address   = {Taejŏn},
  issn      = {2092-7614 (Print)},
  doi       = {10.12989/eas.2017.12.4.409},
  pages     = {409 -- 423},
  year      = {2017},
  abstract  = {This paper proposes a quick and simplified method to describe masonry vaults in global seismic analyses of buildings. An equivalent macro-element constituted by a set of six trusses, two for each transverse, longitudinal and diagonal direction, is introduced. The equivalent trusses, whose stiffness is calculated by fully modeled vaults of different geometry, mechanical properties and boundary conditions, simulate the vault in both global analysis and local analysis, such as kinematic or rocking approaches. A parametric study was carried out to investigate the influence of geometrical characteristics and mechanical features on the equivalent stiffness values. The method was numerically validated by performing modal and transient analysis on a three naves-church in the elastic range. Vibration modes and displacement time-histories were compared showing satisfying agreement between the complete and the simplified models. This procedure is particularly useful in engineering practice because it allows to assess, in a simplified way, the effectiveness of strengthening interventions for reducing horizontal relative displacements between vault supports.},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Numerical calibration of a macro-element for vaultes system in historic churches},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@incollection{GiresiniButenweg2019,
  author    = {Giresini, Linda and Butenweg, Christoph},
  title     = {Earthquake resistant design of structures according to Eurocode 8},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_4},
  pages     = {197 -- 358},
  year      = {2019},
  abstract  = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.},
  language  = {en}
}
@techreport{GhinaiyaLehmannGoettsche2022,
  author    = {Ghinaiya, Jagdishkumar and Lehmann, Thomas and G{\"o}ttsche, Joachim},
  title     = {LOCAL+ - ein kreislauff{\"a}higer Holzmodulbau mit nachhaltigem Energie- und Wohnraumkonzept},
  series = {Bauphysik},
  volume    = {44},
  journal   = {Bauphysik},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Hoboken},
  issn      = {0171-5445 (Print)},
  doi       = {10.1002/bapi.202200010},
  pages     = {136 -- 142},
  year      = {2022},
  abstract  = {Mit dem Beitrag des Teams der FH Aachen zum SDE 21/22 wird im Projekt LOCAL+ ein kreislauff{\"a}higer Holzmodulbau mit einem innovativen Wohnraumkonzept geplant und umgesetzt. Ziel dieses Konzeptes ist die Verringerung des stetig steigenden Wohnfl{\"a}chenbedarfs durch ein Raum-in-Raum Konzept. Geb{\"a}udetechnisch wird in dem Projekt nicht nur das Einzelgeb{\"a}ude betrachtet, sondern unter Ber{\"u}cksichtigung des Geb{\"a}udebestandes wird f{\"u}r das Quartier ein innovatives und nachhaltiges Energiekonzept entwickelt. Ein zentrales Wasserstoffsystem ist f{\"u}r ein Quartier geplant, um den Stromverbrauch aus dem Netz im Winter zu reduzieren. Zentraler Bestandteil des TGA-Konzepts ist ein unterirdischer Eisspeicher, eine PVT und eine W{\"a}rmepumpe mit intelligenter Regelstrategie. Ein Teil des neuen Geb{\"a}udes (Design Challenge DC) wird in Wuppertal als Hausdemonstrationseinheit (HDU) pr{\"a}sentiert. Eine hygrothermische Simulation der HDU wurde mit der WUFI-Software durchgef{\"u}hrt. Da im Innenraum Lehmmodule und -platten als Feuchtigkeitspuffer verwendet werden, spielen die Themen Feuchtigkeit, Holzf{\"a}ule und Schimmelwachstum eine wichtige Rolle.},
  language  = {de}
}
@inproceedings{GerlingVogelsang1989,
  author    = {Gerling, Ulrich and Vogelsang, D.},
  title     = {Temperaturfeldberechnungen mit ASKA unter Ber{\"u}cksichtigung des Phasen{\"u}bergangs fest/fl{\"u}ssig},
  series = {FEM '89 Congress : International FEM-Congress, Baden-Baden, Federal Republic of Germany, 20./21. November 1989},
  booktitle = {FEM '89 Congress : International FEM-Congress, Baden-Baden, Federal Republic of Germany, 20./21. November 1989},
  publisher = {IKOSS},
  address   = {Stuttgart},
  pages     = {295 -- 314},
  year      = {1989},
  language  = {de}
}
@article{GerlingPredel1986,
  author    = {Gerling, Ulrich and Predel, Bruno},
  title     = {Beitrag zur Frage nach der Assoziatbildung in fl{\"u}ssigen Antimon-Zink-Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 1},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 1},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {17 -- 25},
  year      = {1986},
  language  = {de}
}
@article{GerlingPredel1984,
  author    = {Gerling, Ulrich and Predel, Bruno},
  title     = {Assoziation in fl{\"u}ssigen Gold-Zink-Legierungen und die Zuverl{\"a}ssigkeit der Modellparameter},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 75, H. 8},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 75, H. 8},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {592 -- 598},
  year      = {1984},
  language  = {de}
}
@article{GerlingPredel1983,
  author    = {Gerling, Ulrich and Predel, Bruno},
  title     = {Berechnung der Parameter des Assoziatmodells f{\"u}r bin{\"a}re Legierungen nach der Methode der kleinsten Summe der Fehlerquadrate},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 12},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 12},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {810 -- 818},
  year      = {1983},
  language  = {de}
}
@article{GerlingPredel1980,
  author    = {Gerling, Ulrich and Predel, Bruno},
  title     = {Zur Kenntnis thermodynamischer Eigenschaften fl{\"u}ssiger Kupfer-Zink-Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 3},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 3},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {158 -- 164},
  year      = {1980},
  language  = {de}
}
@article{GerlingPredel1980,
  author    = {Gerling, Ulrich and Predel, Bruno},
  title     = {Zur Kenntnis thermodynamischer Eigenschaften fl{\"u}ssiger Gold-Zink-Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 2},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 2},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {79 -- 84},
  year      = {1980},
  language  = {de}
}
@article{GerlingPoolPredel1983,
  author    = {Gerling, Ulrich and Pool, M. J. and Predel, Bruno},
  title     = {A contribution to the associate model for binary liquid alloys = Ein Beitrag zum Assoziat-Modell f{\"u}r bin{\"a}re fl{\"u}ssige Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 9},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 9},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {616 -- 619},
  year      = {1983},
  language  = {en}
}
@article{GerlingPoolPredel1979,
  author    = {Gerling, Ulrich and Pool, M. J. and Predel, Bruno},
  title     = {Zur Kenntnis thermodynamischer Eigenschaften fl{\"u}ssiger Silber-Zink-Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 4},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 71, H. 4},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {224 -- 229},
  year      = {1979},
  language  = {de}
}
@article{GerlingLueckPredel1987,
  author    = {Gerling, Ulrich and L{\"u}ck, Reinhard and Predel, Bruno},
  title     = {Thermodynamische Untersuchungen im System Antimon-Germanium-Zink},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 78, H. 1},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 78, H. 1},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {13 -- 18},
  year      = {1987},
  language  = {de}
}
@article{GerlingLueckPredel1986,
  author    = {Gerling, Ulrich and L{\"u}ck, Reinhard and Predel, Bruno},
  title     = {Thermodynamische Untersuchung fl{\"u}ssiger Legierungen des Systems Silber-Gold-Zink},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 11},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 11},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {730 -- 738},
  year      = {1986},
  language  = {de}
}
@article{GerlingLueckPredel1986,
  author    = {Gerling, Ulrich and L{\"u}ck, Reinhard and Predel, Bruno},
  title     = {Assoziation in fl{\"u}ssigen Antimon-Zink-Legierungen und die Ber{\"u}cksichtigung der Gr{\"o}ßenverh{\"a}ltnisse der Teilchen in der Schmelze},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 2},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 2},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {80 -- 86},
  year      = {1986},
  language  = {de}
}
@article{GerlingLueckPredel1986,
  author    = {Gerling, Ulrich and L{\"u}ck, Reinhard and Predel, Bruno},
  title     = {Assoziation in fl{\"u}ssigen Germanium-Zink-Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 6},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 77, H. 6},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {489 -- 496},
  year      = {1986},
  language  = {de}
}
@phdthesis{Gerling1981,
  author    = {Gerling, Ulrich},
  title     = {Thermodynamische Untersuchungen im System Silber-Gold-Zink zur Erschließung der Assoziatgleichgewichte},
  pages     = {276 S. : graph. Darst.},
  year      = {1981},
  language  = {de}
}
@article{GeorgStollenwerkReinkensmeieretal.2021,
  author    = {Georg, J{\"o}rg Heiner and Stollenwerk, Dominik and Reinkensmeier, Sebastian and Jungbluth, Christian},
  title     = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 1: Quo vadis, Marktdesign?},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {71},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {1/2},
  publisher = {ETV Energieverlag},
  address   = {Essen},
  isbn      = {0720-6240},
  issn      = {0013-743X},
  pages     = {64 -- 69},
  year      = {2021},
  language  = {de}
}
@inproceedings{GellertParkButenweg2010,
  author    = {Gellert, Christoph and Park, Jin and Butenweg, Christoph},
  title     = {Seismic safety verification of masonry structures},
  series = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  booktitle = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  publisher = {ARGE 8IMC Dresden},
  address   = {Radebeul},
  organization    = {International Masonry Conference <8, 2010, Dresden>},
  isbn      = {978-3-00-031381-3},
  pages     = {813 -- 822},
  year      = {2010},
  language  = {en}
}
@inproceedings{GellertNordaButenweg2008,
  author    = {Gellert, Christoph and Norda, Hannah and Butenweg, Christoph},
  title     = {Nonlinear behaviour of masonry under cyclic loading},
  series = {7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton},
  booktitle = {7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton},
  organization    = {European Conference on Structural Dynamics, EURODYN <7, 2008, Southampton>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@article{GellertButenweg2014,
  author    = {Gellert, Christoph and Butenweg, Christoph},
  title     = {Seismic analysis of masonry structures in German earthquake zones according to DIN EN 1998-1},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {3-4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400626},
  pages     = {188 -- 196},
  year      = {2014},
  abstract  = {Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) "Bauten in deutschen Erdbebengebieten - Lastannahmen, Bemessung und Ausf{\"u}hrung {\"u}blicher Hochbauten" eingef{\"u}hrt, in der aber f{\"u}r Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau-Arbeitsausschuss "Erdbeben; Sonderfragen" des Deutschen Instituts f{\"u}r Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollst{\"a}ndig {\"u}berarbeitet und durch die DIN 4149 (2005) abgel{\"o}st, die umfangreiche Regelungen f{\"u}r die seismische Auslegung von Mauerwerksbauten enth{\"a}lt. Mittlerweile liegen die DIN EN 1998-1 (2010) und der Nationale Anhang DIN EN 1998-1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgef{\"u}hrten Anwendungserprobung bauaufsichtlich eingef{\"u}hrt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen {\"U}berblick {\"u}ber die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europ{\"a}ischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.},
  language  = {de}
}
@inproceedings{GellertButenweg2009,
  author    = {Gellert, Christoph and Butenweg, Christoph},
  title     = {Nichtlinearer Erdbebennachweis von Mauerwerksbauten},
  series = {Erdbeben und Mauerwerk : 11. D-A-CH-Tagung 2009 ; [10./11. September 2009 in Z{\"u}rich] / SGEB, Swiss Society for Earthquake Engineering and Structural Dynamics; Schweizerischer Ingenieur- und Architektenverein, Fachgruppe f{\"u}r Br{\"u}ckenbau und Hochbau. [Hrsg. Dazio, Alessandro ...]},
  booktitle = {Erdbeben und Mauerwerk : 11. D-A-CH-Tagung 2009 ; [10./11. September 2009 in Z{\"u}rich] / SGEB, Swiss Society for Earthquake Engineering and Structural Dynamics; Schweizerischer Ingenieur- und Architektenverein, Fachgruppe f{\"u}r Br{\"u}ckenbau und Hochbau. [Hrsg. Dazio, Alessandro ...]},
  publisher = {SIA},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <11, 2009, Z{\"u}rich>},
  isbn      = {978-3-03732-021-1},
  pages     = {125 -- 132},
  year      = {2009},
  language  = {de}
}
@incollection{GeislerPieper2017,
  author    = {Geisler, Simon and Pieper, Martin},
  title     = {Mathematik PLuS als E-Book. Kann ein E-Book zur Ingenieursmathematik alle Lerntypen ansprechen?},
  series = {Das elektronische Schulbuch 2016},
  booktitle = {Das elektronische Schulbuch 2016},
  publisher = {LIT Verlag},
  address   = {Berlin},
  isbn      = {978-3-643-13475-2},
  pages     = {99 -- 111},
  year      = {2017},
  language  = {de}
}
@article{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test Facility for Absorber Specimens of Solar Tower Power Plants},
  series = {Advances in Science and Technology. 74 (2010)},
  journal   = {Advances in Science and Technology. 74 (2010)},
  pages     = {266 -- 271},
  year      = {2010},
  language  = {en}
}
@inproceedings{GedleSchmitzGielenetal.2022,
  author    = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Caminos, Ricardo Alexander Chico and Dersch, J{\"u}rgen},
  title     = {Analysis of an integrated CSP-PV hybrid power plant},
  series = {SolarPACES 2020},
  booktitle = {SolarPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086236},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.},
  language  = {en}
}
@article{FoersterZettlerMikkelsenetal.1992,
  author    = {F{\"o}rster, Arnold and Zettler, J.-T. and Mikkelsen, H. and Leo, K.},
  title     = {Modulated ellipsometric measurements and transfer-matrix calculation of the field-dependent dielectric function of a multiple quantum well / J.-Th. Zettler ; H. Mikkelsen ; K. Leo ... A. F{\"o}rster},
  series = {Physical Review B . 46 (1992), H. 24},
  journal   = {Physical Review B . 46 (1992), H. 24},
  isbn      = {0163-1829},
  pages     = {15955 -- 15962},
  year      = {1992},
  language  = {en}
}
@article{FoersterZamdmerHuetal.1999,
  author    = {F{\"o}rster, Arnold and Zamdmer, N. and Hu, Qing and Verghese, S.},
  title     = {Mode-Discriminating Photoconductor and Coplanar Wave-Guide Circuits for Picosecond Sampling. Zamdmer, N.; Hu, Qing ; Verghese, S. ; F{\"o}rster, A.},
  series = {Applied Physics Letters. 74 (1999), H. 7},
  journal   = {Applied Physics Letters. 74 (1999), H. 7},
  isbn      = {1077-3118},
  pages     = {1039 -- 1041},
  year      = {1999},
  language  = {en}
}
@article{FoersterZamdmerHuetal.1999,
  author    = {F{\"o}rster, Arnold and Zamdmer, N. and Hu, Qing and McIntosh, K. A.},
  title     = {On-chip frequency domain submillimeter-wave transceiver. Zamdmer, N.; Hu, Qing ; McIntosh K. A. ; Verghise, S. ; F{\"o}rster, A.},
  series = {Applied Physics Letters. 75 (1999), H. 24},
  journal   = {Applied Physics Letters. 75 (1999), H. 24},
  isbn      = {1077-3118},
  pages     = {3877 -- 3879},
  year      = {1999},
  language  = {en}
}