@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Christian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@article{FoersterOhlerDaniels1997,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Daniels, C.},
  title     = {Barrier height at clean Au/InAs(100) interfaces / C. Ohler ; C. Daniels ; A. F{\"o}rster ...},
  series = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 15 (1997), H. 3},
  journal   = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 15 (1997), H. 3},
  isbn      = {0169-4332},
  pages     = {702 -- 706},
  year      = {1997},
  language  = {en}
}
@article{FoersterOhlerMoers1997,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Moers, J.},
  title     = {Band offsets at heavily strained III - V interfaces / C. Ohler ; A. F{\"o}rster ; J. Moers...},
  series = {Journal of Physics D: Applied Physics. 30 (1997), H. 10},
  journal   = {Journal of Physics D: Applied Physics. 30 (1997), H. 10},
  isbn      = {0022-3727},
  pages     = {1436 -- 1441},
  year      = {1997},
  language  = {en}
}
@article{MarxSchenkBehrensetal.2013,
  author    = {Marx, Ulrich and Schenk, Friedrich and Behrens, Jan and Meyr, Ulrike and Wanek, Paul and Zang, Werner and Schmitt, Robert and Br{\"u}stle, Oliver and Zenke, Martin and Klocke, Fritz},
  title     = {Automatic production of induced pluripotent stem cells},
  series = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  volume    = {Vol. 5},
  journal   = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  pages     = {2 -- 6},
  year      = {2013},
  language  = {en}
}
@incollection{ButenwegThierauf1999,
  author    = {Butenweg, Christoph and Thierauf, G.},
  title     = {Automatic design of reinforced concrete structures with parallel computing},
  series = {Innovative computational methods for structural mechanics},
  booktitle = {Innovative computational methods for structural mechanics},
  editor    = {Papadrakakis, M. and Topping, B.H.V.},
  publisher = {Saxe-Coburg Publication},
  address   = {Edinburgh},
  isbn      = {1-874672-05-9},
  doi       = {10.4203/csets.1.14},
  pages     = {305 -- 318},
  year      = {1999},
  abstract  = {A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.},
  language  = {en}
}
@inproceedings{SildatkeKarwanniKraftetal.2020,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {Automated Software Quality Monitoring in Research Collaboration Projects},
  series = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  booktitle = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  doi       = {10.1145/3387940.3391478},
  pages     = {603 -- 610},
  year      = {2020},
  language  = {en}
}
@article{FoersterRosenauerRemmele1997,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Remmele, T.},
  title     = {Atomic scale strain measurements by the digital analysis of transmission electron microscopic lattice images / A. Rosenauer ; T. Remmele ; D. Gerthsen ... A. F{\"o}rster},
  series = {Optik : international journal for light and electron optics. 105 (1997), H. 3},
  journal   = {Optik : international journal for light and electron optics. 105 (1997), H. 3},
  isbn      = {0030-4026},
  pages     = {99 -- 107},
  year      = {1997},
  language  = {en}
}
@article{FoersterRosenauerOberstetal.1999,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Oberst, W. and Gerthsen, D.},
  title     = {Atomic scale analysis of the indium distribution in InGaAs/GaAs (001) heterostructures: segregation, lateral indium redistribution and the effect of growth interruptions. Rosenauer, A. ; Oberst, W. ; Gerthsen, D. ; F{\"o}rster, A.},
  series = {Thin Solid Films. 357 (1999)},
  journal   = {Thin Solid Films. 357 (1999)},
  isbn      = {0040-6090},
  pages     = {18 -- 21},
  year      = {1999},
  language  = {en}
}
@article{FoersterSchaeferLondschien1988,
  author    = {F{\"o}rster, Arnold and Sch{\"a}fer, B.-J. and Londschien, M.},
  title     = {Arsenic passivation of MOMBE grown GaAs surfaces / B. -J. Sch{\"a}fer ; A. F{\"o}rster ; M. Londschien ...},
  series = {Surface Science. 204 (1988), H. 3},
  journal   = {Surface Science. 204 (1988), H. 3},
  isbn      = {0039-6028},
  pages     = {485 -- 490},
  year      = {1988},
  language  = {en}
}
@article{FoersterReschEsseraetal.1992,
  author    = {F{\"o}rster, Arnold and Resch, U. and Essera, N. and Raptis, Y. S.},
  title     = {Arsenic passivation of MBE grown GaAs(100): structural and electronic properties of the decapped surfaces / U. Resch ; N. Essera ; Y. S. Raptis ... A. F{\"o}rster ...},
  series = {Surface Science. 269-270 (1992)},
  journal   = {Surface Science. 269-270 (1992)},
  isbn      = {0039-6028},
  pages     = {797 -- 803},
  year      = {1992},
  language  = {en}
}
@article{PieperKlein2012,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Application of simple, periodic homogenization techniques to non-linear heat conduction problems in non-periodic, porous media},
  series = {Heat mass transfer},
  volume    = {48},
  journal   = {Heat mass transfer},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0947-7411},
  doi       = {10.1007/s00231-011-0879-4},
  pages     = {291 -- 300},
  year      = {2012},
  abstract  = {Often, detailed simulations of heat conduction in complicated, porous media have large runtimes. Then homogenization is a powerful tool to speed up the calculations by preserving accurate solutions at the same time. Unfortunately real structures are generally non-periodic, which requires unpractical, complicated homogenization techniques. We demonstrate in this paper, that the application of simple, periodic techniques to realistic media, that are just close to periodic, gives accurate, approximative solutions. In order to obtain effective parameters for the homogenized heat equation, we have to solve a so called "cell problem". In contrast to periodic structures it is not trivial to determine a suitable unit cell, which represents a non-periodic media. To overcome this problem, we give a rule of thumb on how to choose a good cell. Finally we demonstrate the efficiency of our method for virtually generated foams as well as real foams and compare these results to periodic structures.},
  language  = {en}
}
@article{HelsperNiessnerRoenicke1984,
  author    = {Helsper, Christoph and Nießner, R. and R{\"o}nicke, G.},
  title     = {Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R.; Helsper, C.; R{\"o}nicke, G.},
  series = {Aerosols : science, technology, and industr. applications of airborne particles ; proceedings of the 1. Internat. Aerosol Conference held Sept. 17-21, 1984, Minneapolis, Minn., U.S.A / ed.: Benjamin Y. H. Liu},
  journal   = {Aerosols : science, technology, and industr. applications of airborne particles ; proceedings of the 1. Internat. Aerosol Conference held Sept. 17-21, 1984, Minneapolis, Minn., U.S.A / ed.: Benjamin Y. H. Liu},
  publisher = {Elsevier},
  address   = {New York [u.a.]},
  isbn      = {0444009477},
  pages     = {63 -- 66},
  year      = {1984},
  language  = {en}
}
@article{HelsperNiessner1985,
  author    = {Helsper, Christoph and Nießner, R.},
  title     = {Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R. ; Helsper, C.},
  series = {Journal of Aerosol Science. 16 (1985), H. 3},
  journal   = {Journal of Aerosol Science. 16 (1985), H. 3},
  isbn      = {0021-8502},
  pages     = {201 -- 209},
  year      = {1985},
  language  = {en}
}
@article{FoersterDarmoDubeckyetal.1998,
  author    = {F{\"o}rster, Arnold and Darmo, J. and Dubecky, F. and Kordos, P.},
  title     = {Annealing effect on concentration of EL6-like deep-level state in low-temperature-grown molecular beam epitaxial GaAs. Darmo, J.; Dubecky, F.; Kordos, P.; F{\"o}rster, A.},
  series = {Applied Physics Letters. 72 (1998), H. 5},
  journal   = {Applied Physics Letters. 72 (1998), H. 5},
  isbn      = {1077-3118},
  pages     = {590 -- 592},
  year      = {1998},
  language  = {en}
}
@article{FoersterDarmoDubeckyetal.1996,
  author    = {F{\"o}rster, Arnold and Darmo, J. and Dubeck{\´y}, F. and Kordos, P.},
  title     = {Annealing characteristics of native defects in low-temperature-grown MBE GaAs / J. Darmo ; F. Dubecky ; P. Kordos ; A. F{\"o}rster},
  series = {Semiconducting and insulating materials 1996 : proceedings of the 9th Conference on Semiconducting and Insulating Materials (SIMC '9), April 29 - May 3, 1996, Toulouse, France / [IEEE]},
  journal   = {Semiconducting and insulating materials 1996 : proceedings of the 9th Conference on Semiconducting and Insulating Materials (SIMC '9), April 29 - May 3, 1996, Toulouse, France / [IEEE]},
  address   = {Piscataway, NJ [u.a.]},
  isbn      = {0-7803-3095-1},
  pages     = {67 -- ff.},
  year      = {1996},
  language  = {en}
}
@article{BarsovBechstedtHardt2001,
  author    = {Barsov, S. and Bechstedt, U. and Hardt, Arno},
  title     = {ANKE, a new facility for medium energy hadron physics at COSY-J{\"u}lich / S. Barsov [u.a.]},
  series = {Nuclear instruments and methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Vol. 462, iss. 3},
  journal   = {Nuclear instruments and methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Vol. 462, iss. 3},
  issn      = {0167-5087 (Print) ; 0168-9002 (E-journal)},
  pages     = {364 -- 381},
  year      = {2001},
  language  = {en}
}
@inproceedings{BreitbachAlexopoulosMayetal.2019,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Analysis of volumetric solar radiation absorbers made of wire meshes},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117521},
  pages     = {030009-1 -- 030009-6},
  year      = {2019},
  language  = {en}
}
@article{ButenwegRosinHoller2017,
  author    = {Butenweg, Christoph and Rosin, Julia and Holler, Stefan},
  title     = {Analysis of cylindrical granular material silos under seismic excitation},
  series = {Buildings},
  volume    = {7},
  journal   = {Buildings},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2075-5309},
  doi       = {10.3390/buildings7030061},
  pages     = {1 -- 12},
  year      = {2017},
  abstract  = {Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil-structure interaction effects are taken into account.},
  language  = {en}
}
@inproceedings{RosinMykoniouButenweg2017,
  author    = {Rosin, J. and Mykoniou, K. and Butenweg, Christoph},
  title     = {Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 14},
  year      = {2017},
  abstract  = {Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.},
  language  = {en}
}
@inproceedings{GedleSchmitzGielenetal.2022,
  author    = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Caminos, Ricardo Alexander Chico and Dersch, J{\"u}rgen},
  title     = {Analysis of an integrated CSP-PV hybrid power plant},
  series = {SolarPACES 2020},
  booktitle = {SolarPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086236},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.},
  language  = {en}
}
@article{FoersterVergheseZamdmeretal.1996,
  author    = {F{\"o}rster, Arnold and Verghese, S. and Zamdmer, N. and Hu, Qing},
  title     = {An optical correlator using a low-temperature-grown GaAs photoconductor / S. Verghese ; N. Zamdmer ; Qing Hu .... A. F{\"o}rster},
  series = {Applied physics letters. 69 (1996), H. 6},
  journal   = {Applied physics letters. 69 (1996), H. 6},
  isbn      = {0003-6951},
  pages     = {842 -- 844},
  year      = {1996},
  language  = {en}
}
@inproceedings{PuetzBaierBrauneretal.2022,
  author    = {P{\"u}tz, Sebastian and Baier, Ralph and Brauner, Philipp and Brillowski, Florian and Dammers, Hannah and Liehner, Luca and Mertens, Alexander and Rodemann, Niklas and Schneider, Sebastian and Schollemann, Alexander and Steuer-Dankert, Linda and Vervier, Luisa and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank T. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {An interdisciplinary view on humane interfaces for digital shadows in the internet of production},
  series = {2022 15th International Conference on Human System Interaction (HSI)},
  booktitle = {2022 15th International Conference on Human System Interaction (HSI)},
  publisher = {IEEE},
  isbn      = {978-1-6654-6823-7 (Print)},
  issn      = {2158-2246 (Print)},
  doi       = {10.1109/HSI55341.2022.9869467},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers' capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.},
  language  = {en}
}
@article{FoersterMarsoGersdorfetal.1999,
  author    = {F{\"o}rster, Arnold and Marso, M. and Gersdorf, P. and Fox, A.},
  title     = {An InAlAs-InGaAs OPFET with responsivity above 200 A/W at 1.3-\&\#956;m wavelength. Marso, M.; Gersdorf, P.; Fox, A.; Hodel, U.; Lambertini, R.; Kordos, P.},
  series = {IEEE Photonics Technology Letters. 11 (1999), H. 1},
  journal   = {IEEE Photonics Technology Letters. 11 (1999), H. 1},
  isbn      = {1041-1135},
  pages     = {117 -- 119},
  year      = {1999},
  language  = {en}
}
@article{LueckGerlingPredel1989,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {An entropy paradox of the association model},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {270 -- 275},
  year      = {1989},
  language  = {en}
}
@inproceedings{GoemmelKobNiendorfetal.2009,
  author    = {G{\"o}mmel, Andreas and Kob, Malte and Niendorf, Thoralf and Butenweg, Christoph},
  title     = {An approach for numerical calculation of glottal flow during glottal closure},
  series = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  booktitle = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  publisher = {DEGA},
  address   = {Berlin},
  organization    = {NAG DAGA <2009, Rotterdam>},
  isbn      = {978-3-9808659-6-8},
  pages     = {1722 -- 1725},
  year      = {2009},
  language  = {en}
}
@article{FischerDoerenJanke1981,
  author    = {Fischer, W. A. and D{\"o}ren, Horst-Peter and Janke, Dieter},
  title     = {Aluminium nitride probes for application in iron melts},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3},
  issn      = {0003-8962},
  pages     = {91 -- 98},
  year      = {1981},
  language  = {en}
}
@article{HoylerMohrStaudt1994,
  author    = {Hoyler, Friedrich and Mohr, P. and Staudt, G.},
  title     = {Alpha-cluster states of 212po in a realistic potential model},
  series = {Physical review / C. 50 (1994), H. 5},
  journal   = {Physical review / C. 50 (1994), H. 5},
  isbn      = {0556-2813},
  pages     = {2631 -- 2634},
  year      = {1994},
  language  = {en}
}
@article{FoersterLauterProticetal.1995,
  author    = {F{\"o}rster, Arnold and Lauter, J. and Protic, D. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs SAM-avalanche photodiode : an X-ray detector for low energy photons / J. Lauter ; D. Protic ; A. F{\"o}rster ; H. L{\"u}th},
  series = {Nuclear instruments and methods in physics research section A: Accelerators, spectrometers, detectors and associated equipment. 356 (1995), H. 2-3},
  journal   = {Nuclear instruments and methods in physics research section A: Accelerators, spectrometers, detectors and associated equipment. 356 (1995), H. 2-3},
  isbn      = {0168-9002},
  pages     = {324 -- 329},
  year      = {1995},
  language  = {en}
}
@article{FoersterLauterLueth1996,
  author    = {F{\"o}rster, Arnold and Lauter, J. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs avalanche detector array-1 GBit/s X-ray receiver fortiming measurements / J. Lauter ; A. F{\"o}rster ; H. L{\"u}th ...},
  series = {IEEE Transactions on Nuclear Science (T-NS). 43 (1996), H. 3, Part 2},
  journal   = {IEEE Transactions on Nuclear Science (T-NS). 43 (1996), H. 3, Part 2},
  isbn      = {0018-9499},
  pages     = {1446 -- 1451},
  year      = {1996},
  language  = {en}
}
@article{FoersterLauterLueth1996,
  author    = {F{\"o}rster, Arnold and Lauter, J. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs avalanche detector array -1 GBit/s X-ray receiver for timing measurements / J. Lauter ; A. F{\"o}rster ; H. L{\"u}th ...},
  series = {1995 IEEE conference record : October 21 - 28, 1995, San Francisco / Patricia A. Moonier, guest ed. - Vol. 1},
  journal   = {1995 IEEE conference record : October 21 - 28, 1995, San Francisco / Patricia A. Moonier, guest ed. - Vol. 1},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3180-X},
  pages     = {579 -- ff.},
  year      = {1996},
  language  = {en}
}
@article{WaltherGerthsenCariusetal.1993,
  author    = {Walther, T. and Gerthsen, D. and Carius, Reinhard and F{\"o}rster, Arnold},
  title     = {AlAs/GaAs Quantum well structures: Interface properties investigated by high-resolution transmission electron microscopy and photoluminescence spectroscopy / T. Walther ; D. Gerthsen ; R. Carius ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  journal   = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0290-9},
  pages     = {449 -- ff.},
  year      = {1993},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2017,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Advances in solar tower technology},
  series = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  volume    = {6},
  journal   = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  number    = {1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2041-840X},
  doi       = {10.1002/wene.217},
  pages     = {1 -- 19},
  year      = {2017},
  language  = {en}
}
@article{SchwagerFleschSchwarzboezletal.2022,
  author    = {Schwager, Christian and Flesch, Robert and Schwarzb{\"o}zl, Peter and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e}},
  title     = {Advanced two phase flow model for transient molten salt receiver system simulation},
  series = {Solar Energy},
  volume    = {232},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X (print)},
  doi       = {10.1016/j.solener.2021.12.065},
  pages     = {362 -- 375},
  year      = {2022},
  abstract  = {In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.},
  language  = {en}
}
@article{HoylerPetkovAndrejtscheff1988,
  author    = {Hoyler, Friedrich and Petkov, P. and Andrejtscheff, W.},
  title     = {Absolute E0, E1 and E2 transition rates in even-even nuclei obtained in thermal neutron capture / P. Petkov ; W. Andrejtscheff ... F. Hoyler ...},
  series = {Journal of Physics G. 14 (1988), H. S},
  journal   = {Journal of Physics G. 14 (1988), H. S},
  isbn      = {0305-4616},
  pages     = {S97 -- S102},
  year      = {1988},
  language  = {en}
}
@article{StockMalindretosIndlekoferetal.2001,
  author    = {Stock, J. and Malindretos, J. and Indlekofer, K.M. and P{\"o}ttgens, Michael and F{\"o}rster, Arnold and L{\"u}th, Hans},
  title     = {A Vertical Resonant Tunneling Transistor for Application in Digital Logic Circuits},
  series = {IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6},
  journal   = {IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6},
  isbn      = {0018-9383},
  pages     = {1028 -- 1032},
  year      = {2001},
  language  = {en}
}
@article{HardtKoehlerMuelleretal.1980,
  author    = {Hardt, Arno and K{\"o}hler, M. and M{\"u}ller, K. D. and Stoff, H.},
  title     = {A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the J{\"u}lich Cyclotron "JULIC". M. K{\"o}hler, K. D. M{\"u}ller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-B{\"o}ricke , J. Meißburger},
  series = {Nuclear Instruments and Methods. 75 (1980), H. 2-3},
  journal   = {Nuclear Instruments and Methods. 75 (1980), H. 2-3},
  isbn      = {0029-554X},
  pages     = {357 -- 362},
  year      = {1980},
  language  = {en}
}
@article{PieperKlein2011,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {A simple and accurate numerical network flow model for bionic micro heat exchangers},
  series = {Heat mass transfer},
  volume    = {47},
  journal   = {Heat mass transfer},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {0947-7411},
  pages     = {491 -- 503},
  year      = {2011},
  language  = {en}
}
@inproceedings{MistlerButenweg2005,
  author    = {Mistler, Michael and Butenweg, Christoph},
  title     = {A seismic design procedure for masonry buildings},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.193},
  pages     = {465 -- 467},
  year      = {2005},
  language  = {en}
}
@article{HoylerCollinsEid1989,
  author    = {Hoyler, Friedrich and Collins, S. P. and Eid, S. A.},
  title     = {A search for mixed-symmetry states in the mass A approximately 50 region / S. P. Collins ; S. A. Eid ... F. Hoyler},
  series = {Journal of Physics G. 15 (1989), H. 3},
  journal   = {Journal of Physics G. 15 (1989), H. 3},
  isbn      = {0954-3899},
  pages     = {321 -- 332},
  year      = {1989},
  language  = {en}
}
@inproceedings{PhilippBrillowskiDammersetal.2020,
  author    = {Philipp, Brauner and Brillowski, Florian Sascha and Dammers, Hannah and K{\"o}nigs, Peter and Kordtomeikel, Frauke Carole and Petruck, Henning and Schaar, Anne Kathrin and Schmitz, Seth and Steuer-Dankert, Linda and Mertens, Alexander and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Nitsch, Verena and Schuh, G{\"u}nther and Ziefle, Martina},
  title     = {A research framework for human aspects in the internet of production: an intra-company perspective},
  series = {Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16-20, 2020, USA},
  booktitle = {Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16-20, 2020, USA},
  editor    = {Mrugalska, Beata and Trzcielinski, Stefan and Karwowski, Waldemar and Nicolantonio, Massimo Di and Roossi, Emilio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-51980-3},
  doi       = {10.1007/978-3-030-51981-0_1},
  pages     = {3 -- 17},
  year      = {2020},
  abstract  = {Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the "Internet of Production" (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.},
  language  = {en}
}
@inproceedings{ParkElDaibButenwegetal.2011,
  author    = {Park, Jin and El-Daib, Khaled and Butenweg, Christoph and Gellert, Christoph},
  title     = {A novel macroelement approach for masonry walls},
  series = {Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)},
  booktitle = {Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)},
  publisher = {K. U. Leuven, Dep. of Civil Engineering},
  address   = {Leuven},
  organization    = {International Conference on Structural Dynamics, EURODYN <8, 2011, Leuven>},
  isbn      = {978-90-76019-31-4},
  pages     = {3281 -- 3286},
  year      = {2011},
  language  = {en}
}
@article{HodelOrzatiMarsoetal.2000,
  author    = {Hodel, U. and Orzati, A. and Marso, M. and Homann, O. and Fox, A. and Hart, A. v. d. and F{\"o}rster, Arnold and Kordos, P. and L{\"u}th, H.},
  title     = {A novel InAlAs/InGaAs layer structure for monolithically integrated photoreceiver},
  series = {Conference Proceedings: 2000 International Conference on Indium Phosphide and related materials},
  journal   = {Conference Proceedings: 2000 International Conference on Indium Phosphide and related materials},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-6320-5},
  pages     = {466 -- 469},
  year      = {2000},
  language  = {en}
}
@misc{ButenwegGellertReindletal.2009,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas and Meskouris, Konstantin},
  title     = {A nonlinear method for the seismic safety verification of masonry buildings},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  year      = {2009},
  abstract  = {In order for traditional masonry to stay a competitive building material in seismically active regions there is an urgent demand for modern, deformation-based verification procedures which exploit the nonlinear load bearing reserves. The Capacity Spectrum Method (CSM) is a widely accepted design approach in the field of reinforced concrete and steel construction. It compares the seismic action with the load-bearing capacity of the building considering nonlinear material behavior with its post-peak capacity. The bearing capacity of the building is calculated iteratively using single wall capacity curves. This paper presents a new approach for the bilinear approximation of single wall capacity curves in the style of EC6/EC8 respectively FEMA 306/FEMA 356 based on recent shear wall test results of the European Collective-Research Project "ESECMaSE". The application of the CSM to masonry structures by using bilinear approximations of capacity curves as input is demonstrated on the example of a typical German residential home.},
  language  = {en}
}
@article{ChenClauserMarquartetal.2015,
  author    = {Chen, Tao and Clauser, Christoph and Marquart, Gabriele and Willbrand, Karen and Mottaghy, Darius},
  title     = {A new upscaling method for fractured porous media},
  series = {Advances in Water Resources},
  volume    = {80},
  journal   = {Advances in Water Resources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0309-1708},
  doi       = {10.1016/j.advwatres.2015.03.009},
  pages     = {60 -- 68},
  year      = {2015},
  language  = {en}
}
@article{SchwarzerdaSilvaHoffschmidtetal.2009,
  author    = {Schwarzer, Klemens and da Silva, Vieira E. and Hoffschmidt, Bernhard and Schwarzer, T.},
  title     = {A new solar desalination system with heat recovery for decentralised drinking water production},
  series = {Desalination. 248 (2009), H. 1-3},
  journal   = {Desalination. 248 (2009), H. 1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0011-9164},
  pages     = {204 -- 211},
  year      = {2009},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances},
  series = {Acta Geotechnica},
  volume    = {10},
  journal   = {Acta Geotechnica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1133},
  doi       = {10.1007/s11440-014-0311-6},
  pages     = {219 -- 229},
  year      = {2015},
  language  = {en}
}
@article{HoffschmidtPitzPaalBoehmer1999,
  author    = {Hoffschmidt, Bernhard and Pitz-Paal, Robert and B{\"o}hmer, M.},
  title     = {A new closed/open volumetric receiver concept for parabolictrough collectors (test results)},
  series = {Journal de physique. 9 (1999), H. 3},
  journal   = {Journal de physique. 9 (1999), H. 3},
  isbn      = {1155-4339},
  pages     = {3},
  year      = {1999},
  language  = {en}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@inproceedings{MeskourisHollerButenwegetal.2009,
  author    = {Meskouris, Konstantin and Holler, Stefan and Butenweg, Christoph and Meiners, Daniel},
  title     = {A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems},
  series = {Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)},
  booktitle = {Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)},
  publisher = {CRC Press},
  address   = {Boca Raton, Fla. [u.a.]},
  isbn      = {978-0-415-45261-8},
  doi       = {10.1201/9780203881637.ch19},
  pages     = {293 -- 308},
  year      = {2009},
  language  = {en}
}
@article{HoylerAndrejtscheffPetkov1986,
  author    = {Hoyler, Friedrich and Andrejtscheff, W. and Petkov, P.},
  title     = {A mixed symmetry or quasineutron pair interpretation of the Kpi =03+ level in 172Yb / W. Andrejtscheff ; P. Petkov ... F. Hoyler},
  series = {Journal of physics / G. 12 (1986), H. 6},
  journal   = {Journal of physics / G. 12 (1986), H. 6},
  isbn      = {0305-4616},
  pages     = {L151 -- L156},
  year      = {1986},
  language  = {en}
}