@article{VargaDavinsonGloriusetal.2020,
  author    = {Varga, Laszlo and Davinson, Thomas and Glorius, Jan and Jurado, Beatrix and Langer, Christoph and Lederer-Woods, Claudia and Litvinov, Yuri A. and Reifarth, Rene and Slavkovska, Zuzana and St{\"o}hlker, Thomas and Woods, Phil J. and Xing, Yuan Ming},
  title     = {Towards background-free studies of capture reaction in a heavy-ion storage ring},
  series = {Journal of Physics: Conference Series},
  volume    = {1668},
  journal   = {Journal of Physics: Conference Series},
  number    = {Art 012046},
  publisher = {IOP},
  address   = {Bristol},
  year      = {2020},
  abstract  = {Stored and cooled, highly-charged ions offer unprecedented capabilities for precision studies in the realm of atomic, nuclear structure and astrophysics[1]. After the successful investigation of the 96Ru(p,7)97Rh reaction cross section in 2009[2], the first measurement of the 124Xe(p,7)125Cs reaction cross section has been performed with decelerated, fully-ionized 124Xe ions in 2016 at the Experimental Storage Ring (ESR) of GSI[3]. Using a Double Sided Silicon Strip Detector, introduced directly into the ultra-high vacuum environment of a storage ring, the 125Cs proton-capture products have been successfully detected. The cross section has been measured at 5 different energies between 5.5AMeV and 8AMeV, on the high energy tail of the Gamow-window for hot, explosive scenarios such as supernovae and X-ray binaries. The elastic scattering on the H2 gas jet target is the major source of background to count the (p,7) events. Monte Carlo simulations show that an additional slit system in the ESR in combination with the energy information of the Si detector will enable background free measurements of the proton-capture products. The corresponding hardware is being prepared and will increase the sensitivity of the method tremendously.},
  language  = {en}
}
@article{ElDeibButenwegKlinkel2020,
  author    = {El-Deib, Khaled and Butenweg, Christoph and Klinkel, Sven},
  title     = {Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erh{\"o}hten Verhaltensbeiwerten},
  series = {Bautechnik},
  volume    = {97},
  journal   = {Bautechnik},
  number    = {11},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  doi       = {10.1002/bate.202000016},
  pages     = {756 -- 765},
  year      = {2020},
  abstract  = {Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten f{\"u}hrt dazu, dass bereits heute Standsicherheitsnachweise f{\"u}r Geb{\"a}ude mit {\"u}blichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr gef{\"u}hrt werden k{\"o}nnen. Diese Problematik wird sich in Deutschland mit der Einf{\"u}hrung kontinuierlicher probabilistischer Erdbebenkarten weiter versch{\"a}rfen. Aufgrund der Erh{\"o}hung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht ber{\"u}cksichtigten Tragf{\"a}higkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verf{\"u}gbar zu machen. Der vorliegende Beitrag stellt ein Konzept f{\"u}r die geb{\"a}udespezifische Ermittlung von erh{\"o}hten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsf{\"a}higkeit und Energiedissipation sowie die {\"U}berfestigkeiten ber{\"u}cksichtigt werden. F{\"u}r die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von W{\"a}nden und Geschossdecken durch einen Einspanngrad beschrieben werden. F{\"u}r die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingef{\"u}hrt, mit dem die Interaktion von W{\"a}nden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erh{\"o}hten geb{\"a}udespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erh{\"o}hten Verhaltensbeiwerten f{\"u}r dieses Geb{\"a}ude liegen deutlich n{\"a}her an den Ergebnissen nichtlinearer Nachweise und somit bleiben {\"u}bliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenans{\"a}tzen nachweisbar.},
  language  = {de}
}
@article{ButenwegRosin2020,
  author    = {Butenweg, Christoph and Rosin, Julia},
  title     = {Seismischer Nachweis von Mauerwerksbauten in deutschen Erdbebengebieten},
  series = {Mauerwerk},
  volume    = {24},
  journal   = {Mauerwerk},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202000006},
  pages     = {108 -- 113},
  year      = {2020},
  abstract  = {Mit finanzieller Unterst{\"u}tzung der Deutschen Gesellschaft f{\"u}r Mauerwerks- und Wohnungsbau e.V. (DGfM) und des Deutschen Instituts f{\"u}r Bautechnik in Berlin (DIBt) wurden zwei aufeinander aufbauende Forschungsvorhaben zur Verbesserung der seismischen Nachweise von Mauerwerksbauten in deutschen Erdbebengebieten durchgef{\"u}hrt. Zun{\"a}chst wurde das seismische Verhalten von drei modernen unbewehrten Mauerwerksgeb{\"a}uden in der Region Emilia Romagna in Italien w{\"a}hrend der Erdbebenserie im Jahr 2012 in Kooperation mit der Universit{\"a}t Pavia eingehend untersucht. Aufbauend auf den Erkenntnissen dieser Untersuchungen wurde ein verbessertes seismisches Bemessungskonzept f{\"u}r unbewehrte Mauerwerksbauten erarbeitet. Der Beitrag stellt die wesentlichen Ergebnisse dieser Forschungsarbeiten und deren Eingang in die Normung vor.},
  language  = {de}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Ausfachungen aus Ziegelmauerwerk in Stahlbetonrahmentragwerken unter Erdbebenbeanspruchung},
  series = {Mauerwerk},
  volume    = {24},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202000011},
  pages     = {194 -- 205},
  year      = {2020},
  abstract  = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk weisen nach Erdbeben h{\"a}ufig schwere Sch{\"a}den auf. Gr{\"u}nde hierf{\"u}r sind die Beanspruchungen der Ausfachungsw{\"a}nde durch die aufgezwungenen Rahmenverformungen in Wandebene und die gleichzeitig auftretenden Tr{\"a}gheitskr{\"a}fte senkrecht zur Wandebene in Kombination mit der konstruktiven Ausf{\"u}hrung des Ausfachungsmauerwerks. Die Ausfachung wird in der Regel knirsch gegen die Rahmenst{\"u}tzen gemauert, wobei der Verschluss der oberen Fuge mit M{\"o}rtel oder Montageschaum erfolgt. Dadurch kommt es im Erdbebenfall zu lokalen Interaktionen zwischen Ausfachung und Rahmen, die in der Folge zu einem Versagen einzelner Ausfachungsw{\"a}nde oder zu einem sukzessiven Versagen des Gesamtgeb{\"a}udes f{\"u}hren k{\"o}nnen. Die beobachteten Sch{\"a}den waren die Motivation daf{\"u}r, in dem europ{\"a}ischen Forschungsprojekt INSYSME f{\"u}r Stahlbetonrahmentragwerke mit Ausfachungen aus hochw{\"a}rmed{\"a}mmenden Ziegelmauerwerk innovative L{\"o}sungen zur Verbesserung des seismischen Verhaltens zu entwickeln. Der vorliegende Beitrag stellt die im Rahmen des Projekts von den deutschen Projektpartnern (Universit{\"a}t Kassel, SDA-engineering GmbH) entwickelten L{\"o}sungen vor und vergleicht deren seismisches Verhalten mit der traditionellen Ausf{\"u}hrung der Ausfachungsw{\"a}nde. Grundlage f{\"u}r den Vergleich sind statisch-zyklische Wandversuche und Simulationen auf Wandebene. Aus den Ergebnissen werden Empfehlungen f{\"u}r die erdbebensichere Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk abgeleitet.},
  language  = {de}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Earthquake-proof system for masonry infills in RC frame structures},
  series = {International Journal of Masonry Research and Innovation},
  volume    = {5},
  journal   = {International Journal of Masonry Research and Innovation},
  number    = {2},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {2056-9467},
  doi       = {10.1504/IJMRI.2020.106328},
  pages     = {185 -- 208},
  year      = {2020},
  language  = {de}
}
@article{MichelButenwegKlinkel2020,
  author    = {Michel, P. and Butenweg, Christoph and Klinkel, S.},
  title     = {Einfluss der dynamischen Steifigkeit von Flach-und Pfahlgr{\"u}ndungen auf die Dynamik von Onshore-Windenergieanlagen},
  series = {Bauingenieur},
  volume    = {95},
  journal   = {Bauingenieur},
  number    = {4},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {139 -- 146},
  year      = {2020},
  language  = {de}
}
@inproceedings{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays},
  series = {17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020},
  booktitle = {17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020},
  doi       = {10.1201/9781003098508-72},
  pages     = {1 -- 7},
  year      = {2020},
  language  = {en}
}
@inproceedings{MarkinkovicButenwegPaveseetal.2020,
  author    = {Markinkovic, Marko and Butenweg, Christoph and Pavese, A. and Lanese, I. and Hoffmeister, B. and Pinkawa, M. and Vulcu, C. and Bursi, O. and Nardin, C. and Paolacci, F. and Quinci, G. and Fragiadakis, M. and Weber, F. and Huber, P. and Renault, P. and G{\"u}ndel, M. and Dyke, S. and Ciucci, M. and Marino, A.},
  title     = {Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {159 -- 172},
  year      = {2020},
  language  = {en}
}
@inproceedings{CacciatoreButenweg2020,
  author    = {Cacciatore, Pamela and Butenweg, Christoph},
  title     = {Seismic safety of cylindrical granular material steel silos under seismic loading},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {231 -- 244},
  year      = {2020},
  language  = {en}
}
@inproceedings{MichelRosinButenwegetal.2020,
  author    = {Michel, Philipp and Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil},
  series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)},
  isbn      = {978-3-86359-729-0},
  pages     = {245 -- 254},
  year      = {2020},
  language  = {en}
}
@inproceedings{SildatkeKarwanniKraftetal.2020,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {Automated Software Quality Monitoring in Research Collaboration Projects},
  series = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  booktitle = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  doi       = {10.1145/3387940.3391478},
  pages     = {603 -- 610},
  year      = {2020},
  language  = {en}
}
@book{LabischWaehlisch2020,
  author    = {Labisch, Susanna and W{\"a}hlisch, Georg},
  title     = {Technisches Zeichnen: Eigenst{\"a}ndig lernen und effektiv {\"u}ben},
  edition   = {6th ed.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-30650-2 (E-Book)},
  doi       = {10.1007/978-3-658-30650-2},
  pages     = {Online-Ressource (XI, 296 S. 300 Abb., 81 Abb. in Farbe)},
  year      = {2020},
  language  = {de}
}
@article{RuppRiekeHandschuhetal.2020,
  author    = {Rupp, Matthias and Rieke, Christian and Handschuh, Nils and Kuperjans, Isabel},
  title     = {Economic and ecological optimization of electric bus charging considering variable electricity prices and CO₂eq intensities},
  series = {Transportation Research Part D: Transport and Environment},
  volume    = {81},
  journal   = {Transportation Research Part D: Transport and Environment},
  number    = {Article 102293},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1361-9209},
  doi       = {10.1016/j.trd.2020.102293},
  year      = {2020},
  abstract  = {In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses. In this study, we present a new methodology for optimizing the vehicles' charging time as a function of the parameters CO₂eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO₂eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle. In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6\% compared to charging at a fixed electricity price. The savings potential of CO₂eq emissions is similar, at 14.9\%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO₂eq intensity is also low in this period, but midday charging leads to the largest savings in CO₂eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5\% CO₂eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.},
  language  = {en}
}
@inproceedings{PaulsenHoffstadtKrafftetal.2020,
  author    = {Paulsen, Svea and Hoffstadt, Kevin and Krafft, Simone and Leite, A. and Zang, J. and Fonseca-Zang, W. and Kuperjans, Isabel},
  title     = {Continuous biogas production from sugarcane as sole substrate},
  series = {Energy Reports},
  volume    = {6},
  booktitle = {Energy Reports},
  number    = {Supplement 1},
  publisher = {Elsevier},
  doi       = {10.1016/j.egyr.2019.08.035},
  pages     = {153 -- 158},
  year      = {2020},
  language  = {en}
}
@inproceedings{OetringerDuemmlerGoettsche2020,
  author    = {Oetringer, Kerstin and D{\"u}mmler, Andreas and G{\"o}ttsche, Joachim},
  title     = {Neues Modell zur 1D-Simulation der indirekten Verdunstungsk{\"u}hlung},
  series = {DKV-Tagung 2020, AA II.1},
  booktitle = {DKV-Tagung 2020, AA II.1},
  pages     = {1 -- 13},
  year      = {2020},
  language  = {de}
}
@inproceedings{DuemmlerOetringerGoettsche2020,
  author    = {D{\"u}mmler, Andreas and Oetringer, Kerstin and G{\"o}ttsche, Joachim},
  title     = {Auslegungstool zur energieeffizienten K{\"u}hlung von Geb{\"a}uden},
  series = {DKV-Tagung 2020, AA IV},
  booktitle = {DKV-Tagung 2020, AA IV},
  pages     = {1 -- 12},
  year      = {2020},
  language  = {de}
}
@inproceedings{SattlerCaminosUerlingsetal.2020,
  author    = {Sattler, Johannes, Christoph and Caminos, Ricardo Alexander Chico and {\"U}rlings, Nicolas and Dutta, Siddharth and Ruiz, Victor and Kalogirou, Soteris and Ktistis, Panayiotis and Agathokleous, Rafaela and Jung, Christian and Alexopoulos, Spiros and Atti, Vikrama Nagababu and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029278},
  pages     = {140004-1 -- 140004-10},
  year      = {2020},
  language  = {en}
}
@inproceedings{RendonSchwagerGhiasietal.2020,
  author    = {Rendon, Carlos and Schwager, Christian and Ghiasi, Mona and Schmitz, Pascal and Bohang, Fakhri and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029974},
  pages     = {170012-1 -- 170012-9},
  year      = {2020},
  language  = {en}
}
@article{MarinkovićFloresCalvinistiButenweg2020,
  author    = {Marinković, Marko and Flores Calvinisti, Santiago and Butenweg, Christoph},
  title     = {Numerical analysis of reinforced concrete frame buildings with decoupled infill walls},
  series = {Building Materials and Structures},
  volume    = {63},
  journal   = {Building Materials and Structures},
  number    = {4},
  publisher = {Society for Materials and Structures Testing of Serbia},
  address   = {Belgrad},
  issn      = {2217-8139},
  doi       = {10.5937/GRMK2004013M},
  pages     = {13 -- 48},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characteristics of RC frame structures during earthquake excitation. Recently, significant effort was spent on studying decoupled infills, which are isolated from the surrounding frame usually by adding a gap between frame and infill. In this case, the frame deformation does not activate infill wall, thus infills are not influencing the behaviour of the frame. This paper presents the results of the investigation of the behaviour of RC frame buildings with the INODIS system that decouples masonry infills from the surrounding frame. Effect of masonry infill decoupling was investigated first on the one-bay onestorey frame. This was used as a base for parametric study on the frames with more bays and storeys, as well as on the building level. Change of stiffness and dynamic characteristics was analysed as well as response under earthquake loading. Comparison with the bare frame and traditionally infilled frame was performed. The results show that behaviour of the decoupled infilled frames is similar to the bare frame, whereas behaviour of frames with traditional infills is significantly different and demands complex numerical models. This means that if adequate decoupling is applied, design of},
  language  = {mul}
}
@inproceedings{MarinkovićButenweg2020,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Out-of-plane behavior of decoupled masonry infills under seismic loading},
  series = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  booktitle = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding reinforced concrete frame, thus changing dynamic characteristics of the structure. Consequently, masonry infills cannot be neglected in the design process. However, although the relevant standards contain requirements for infill walls, they do not describe how these requirements are to be met concretely. This leads in practice to the fact that the infill walls are neither dimensioned nor constructed correctly. The evidence of this fact is confirmed by the recent earthquakes, which have led to enormous damages, sometimes followed by the total collapse of buildings and loss of human lives. Recently, the increasing effort has been dedicated to the approach of decoupling of masonry infills from the frame elements by introducing the gap in between. This helps in removing the interaction between infills and frame, but raises the question of out-of-plane stability of the panel. This paper presents the results of the experimental campaign showing the out-of-plane behavior of masonry infills decoupled with the system called INODIS (Innovative decoupled infill system), developed within the European project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings). Full scale specimens were subjected to the different loading conditions and combinations of in-plane and out-of-plane loading. Out-of-plane capacity of the masonry infills with the INODIS system is compared with traditionally constructed infills, showing that INODIS system provides reliable out-of-plane connection under various loading conditions. In contrast, traditional infills performed very poor in the case of combined and simultaneously applied in-plane and out-of-plane loading, experiencing brittle behavior under small in-plane drifts followed by high out-of-plane displacements. Decoupled infills with the INODIS system have remained stable under out-of-plane loads, even after reaching high in-plane drifts and being damaged.},
  language  = {en}
}
@inproceedings{MilkovaButenwegDumovaJovanoska2020,
  author    = {Milkova, Kristina and Butenweg, Christoph and Dumova-Jovanoska, Elena},
  title     = {Methodology for development of seismic vulnerability curve for existing unreinforced Masonry buildings},
  series = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  booktitle = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {Seismic behavior of an existing unreinforced masonry building built pre-modern code, located in the City of Ohrid, Republic of North Macedonia has been investigated in this paper. The analyzed school building is selected as an archetype in an ongoing project named "Seismic vulnerability assessment of existing masonry structures in Republic of North Macedonia (SeismoWall)". Two independent segments were included in this research: Seismic hazard assessment by creating a cite specific response spectra and Seismic vulnerability definition by creating a region - specific series of vulnerability curves for the chosen building topology. A reliable Seismic Hazard Assessment for a selected region is a crucial point for performing a seismic risk analysis of a characteristic building class. In that manner, a scenario - based method that incorporates together the knowledge of tectonic style of the considered region, the active fault characterization, the earth crust model and the historical seismicity named Neo Deterministic approach is used for calculation of the response spectra for the location of the building. Variations of the rupturing process are taken into account in the nucleation point of the rupture, in the rupture velocity pattern and in the istribution of the slip on the fault. The results obtained from the multiple scenarios are obtained as an envelope of the response spectra computed for the cite using the procedure Maximum Credible Seismic Input (MCSI). Capacity of the selected building has been determined by using nonlinear static analysis. MINEA software (SDA Engineering) was used for verification of the structural safety of the chosen unreinforced masonry structure. In the process of optimization of the number of samples, computational cost required in a Monte Carlo simulation is significantly reduced since the simulation is performed on a polynomial response surface function for prediction of the structural response. Performance point, found as the intersection of the capacity of the building and the spectra used, is chosen as a response parameter. Five levels of damage limit states based on the capacity curve of the building are defined in dependency on the yield displacement and the maximum displacement. Maximum likelihood estimation procedure is utilized in the process of vulnerability curves determination. As a result, region specific series of vulnerability curves for the chosen type of masonry structures are defined. The obtained probabilities of exceedance a specific damage states as a result from vulnerability curves are compared with the observed damages happened after the earthquake in July 2017 in the City of Ohrid, North Macedonia.},
  language  = {en}
}
@inproceedings{TomicPennaDeJongetal.2020,
  author    = {Tomic, Igor and Penna, Andrea and DeJong, Matthew and Butenweg, Christoph and Senaldi, Ilaria and Guerrini, Gabriele and Malomo, Daniele and Beyer, Katrin},
  title     = {Blind predictions of shake table testing of aggregate masonry buildings},
  series = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  booktitle = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  year      = {2020},
  abstract  = {In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The SERA project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) provides such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. With the aim to advance the modelling of unreinforced masonry aggregates, a blind prediction competition is organized before the experimental campaign. Each group has been provided a complete set of construction drawings, material properties, testing sequence and the list of measurements to be reported. The applied modelling approaches span from equivalent frame models to Finite Element models using shell elements and discrete element models with solid elements. This paper compares the first entries, regarding the modelling approaches, results in terms of base shear, roof displacements, interface openings, and the failure modes.},
  language  = {en}
}
@inproceedings{TomićPennaDeJongetal.2020,
  author    = {Tomić, Igor and Penna, Andrea and DeJong, Matthew and Butenweg, Christoph and Correia, Ant{\´o}nio A. and Candeias, Paulo X. and Senaldi, Ilaria and Guerrini, Gabriele and Malomo, Daniele and Beyer, Katrin},
  title     = {Seismic testing of adjacent interacting masonry structures},
  series = {12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)},
  booktitle = {12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)},
  doi       = {10.23967/sahc.2021.234},
  pages     = {1 -- 12},
  year      = {2020},
  abstract  = {In many historical centres in Europe, stone masonry buildings are part of building aggregates, which developed when the layout of the city or village was densified. In these aggregates, adjacent buildings share structural walls to support floors and roofs. Meanwhile, the masonry walls of the fa{\c{c}}ades of adjacent buildings are often connected by dry joints since adjacent buildings were constructed at different times. Observations after for example the recent Central Italy earthquakes showed that the dry joints between the building units were often the first elements to be damaged. As a result, the joints opened up leading to pounding between the building units and a complicated interaction at floor and roof beam supports. The analysis of such building aggregates is very challenging and modelling guidelines do not exist. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The objective of the project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures), included in the H2020 project SERA, is to provide such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. The test unit is built at half-scale, with a two-storey building and a one-storey building. The buildings share one common wall while the fa{\c{c}}ade walls are connected by dry joints. The floors are at different heights leading to a complex dynamic response of this smallest possible building aggregate. The shake table test is conducted at the LNEC seismic testing facility. The testing sequence comprises four levels of shaking: 25\%, 50\%, 75\% and 100\% of nominal shaking table capacity. Extensive instrumentation, including accelerometers, displacement transducers and optical measurement systems, provides detailed information on the building aggregate response. Special attention is paid to the interface opening, the globa},
  language  = {en}
}
@inproceedings{DuranParedesMottaghyHerrmannetal.2020,
  author    = {Duran Paredes, Ludwin and Mottaghy, Darius and Herrmann, Ulf and Groß, Rolf Fritz},
  title     = {Online ground temperature and soil moisture monitoring of a shallow geothermal system with non-conventional components},
  series = {EGU General Assembly 2020},
  booktitle = {EGU General Assembly 2020},
  year      = {2020},
  abstract  = {We present first results from a newly developed monitoring station for a closed loop geothermal heat pump test installation at our campus, consisting of helix coils and plate heat exchangers, as well as an ice-store system. There are more than 40 temperature sensors and several soil moisture content sensors distributed around the system, allowing a detailed monitoring under different operating conditions.In the view of the modern development of renewable energies along with the newly concepts known as Internet of Things and Industry 4.0 (high-tech strategy from the German government), we created a user-friendly web application, which will connect the things (sensors) with the open network (www). Besides other advantages, this allows a continuous remote monitoring of the data from the numerous sensors at an arbitrary sampling rate.Based on the recorded data, we will also present first results from numerical simulations, taking into account all relevant heat transport processes.The aim is to improve the understanding of these processes and their influence on the thermal behavior of shallow geothermal systems in the unsaturated zone. This will in turn facilitate the prediction of the performance of these systems and therefore yield an improvement in their dimensioning when designing a specific shallow geothermal installation.},
  language  = {en}
}
@article{RuppHandschuhRiekeetal.2019,
  author    = {Rupp, Matthias and Handschuh, Nils and Rieke, Christian and Kuperjans, Isabel},
  title     = {Contribution of country-specific electricity mix and charging time to environmental impact of battery electric vehicles: A case study of electric buses in Germany},
  series = {Applied Energy},
  volume    = {237},
  journal   = {Applied Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0306-2619},
  doi       = {10.1016/j.apenergy.2019.01.059},
  pages     = {618 -- 634},
  year      = {2019},
  language  = {en}
}
@article{DotzauerPfeifferLaueretal.2019,
  author    = {Dotzauer, Martin and Pfeiffer, Diana and Lauer, Markus and Pohl, Marcel and Mauky, Eric and B{\"a}r, Katharina and Sonnleitner, Matthias and Z{\"o}rner, Wilfried and Hudde, Jessica and Schwarz, Bj{\"o}rn and Faßauer, Burkhardt and Dahmen, Markus and Rieke, Christian and Herbert, Johannes and Thr{\"a}n, Daniela},
  title     = {How to measure flexibility - Performance indicators for demand driven power generation from biogas plants},
  series = {Renewable Energy},
  journal   = {Renewable Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2018.10.021},
  pages     = {135 -- 146},
  year      = {2019},
  language  = {en}
}
@book{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5},
  year      = {2019},
  language  = {en}
}
@incollection{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_3},
  pages     = {153 -- 196},
  year      = {2019},
  abstract  = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.},
  language  = {en}
}
@article{RegerKuhnhenneHachuletal.2019,
  author    = {Reger, Vitali and Kuhnhenne, Markus and Hachul, Helmut and D{\"o}ring, Bernd and Blanke, Tobias and G{\"o}ttsche, Joachim},
  title     = {Plusenergiegeb{\"a}ude 2.0 in Stahlleichtbauweise},
  series = {Stahlbau},
  volume    = {88},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-journal), 0038-9145 (print)},
  doi       = {10.1002/stab.201900034},
  pages     = {522 -- 528},
  year      = {2019},
  language  = {de}
}
@inproceedings{BreitbachAlexopoulosMayetal.2019,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Analysis of volumetric solar radiation absorbers made of wire meshes},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117521},
  pages     = {030009-1 -- 030009-6},
  year      = {2019},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosCaminosetal.2019,
  author    = {Sattler, Johannes, Christoph and Alexopoulos, Spiros and Caminos, Ricardo Alexander Chico and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@article{HerrmannSchwarzenbartDittmannGabriel2019,
  author    = {Herrmann, Ulf and Schwarzenbart, Marc and Dittmann-Gabriel, S{\"o}ren},
  title     = {Speicher statt Kohle. Integration thermischer Stromspeicher in vorhandene Kraftwerksstandorte},
  series = {BWK : Das Energie-Fachmagazin},
  volume    = {71},
  journal   = {BWK : Das Energie-Fachmagazin},
  number    = {4},
  publisher = {Springer-VDI-Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4883},
  pages     = {42 -- 45},
  year      = {2019},
  language  = {de}
}
@book{Pieper2019,
  author    = {Pieper, Martin},
  title     = {Quantenmechanik : Einf{\"u}hrung in die mathematische Formulierung},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-658-28329-2},
  doi       = {10.1007/978-3-658-28329-2},
  year      = {2019},
  language  = {de}
}
@inproceedings{SteuerDankertLeichtScholten2019,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Diversity- and innovation management in complex engineering organizations},
  series = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  booktitle = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  editor    = {Tipurić, Darko and Hruška, Domagoj},
  publisher = {Governance Research and Development Centre (CIRU)},
  address   = {Zagreb},
  pages     = {136 -- 157},
  year      = {2019},
  abstract  = {Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.},
  language  = {en}
}
@article{SteuerDankertGilmartinMulleretal.2019,
  author    = {Steuer-Dankert, Linda and Gilmartin, Shannon K. and Muller, Carol B. and Dungs, Carolin and Sheppard, Sheri and Leicht-Scholten, Carmen},
  title     = {Expanding engineering limits : a concept for socially responsible education of engineers},
  series = {The international journal of engineering education},
  volume    = {35},
  journal   = {The international journal of engineering education},
  number    = {2},
  isbn      = {0949-149X},
  pages     = {658 -- 673},
  year      = {2019},
  language  = {en}
}
@book{BudelmannButenweg2019,
  author    = {Budelmann, Harald and Butenweg, Christoph},
  title     = {Mauerwerksbau: Bemessung und Konstruktion : Baustoffe, Bemessung und Ausf{\"u}hrung, Brandschutz und Erdbeben, Nachhaltigkeit, Bewertung und Revitalisierung},
  editor    = {Gunkler, Erhard},
  edition   = {2. {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Bundesanzeiger Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8462-0371-2},
  pages     = {XXIV, 738 S. ; Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@incollection{ButenwegHoltschoppen2019,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of structures and components in industrial units},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5_5},
  pages     = {359 -- 481},
  year      = {2019},
  abstract  = {Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.},
  language  = {en}
}
@incollection{GiresiniButenweg2019,
  author    = {Giresini, Linda and Butenweg, Christoph},
  title     = {Earthquake resistant design of structures according to Eurocode 8},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_4},
  pages     = {197 -- 358},
  year      = {2019},
  abstract  = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.},
  language  = {en}
}
@book{Pieper2019,
  author    = {Pieper, Martin},
  title     = {Quantenmechanik: Einf{\"u}hrung in die mathematische Formulierung},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-658-28328-5},
  doi       = {10.1007/978-3-658-28329-2},
  pages     = {XI, 33 Seiten},
  year      = {2019},
  language  = {de}
}
@article{RossiStupazziniParisietal.2019,
  author    = {Rossi, Leonardo and Stupazzini, Marco and Parisi, Davide and Holtschoppen, Britta and Ruggieri, Gabriella and Butenweg, Christoph},
  title     = {Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database},
  series = {Bulletin of Earthquake Engineering},
  volume    = {18},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer Nature},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00759-1},
  pages     = {1693 -- 1721},
  year      = {2019},
  abstract  = {The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings' location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.},
  language  = {en}
}
@article{RossiHoltschoppenButenweg2019,
  author    = {Rossi, Leonardo and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007\%2Fs10518-019-00655-8},
  pages     = {4855 -- 4884},
  year      = {2019},
  language  = {en}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{RossiParisiCasarietal.2019,
  author    = {Rossi, Leonardo and Parisi, Davide and Casari, Chiara and Montanari, Luca and Ruggieri, Gabriella and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings},
  series = {Earthquake Spectra},
  volume    = {35},
  journal   = {Earthquake Spectra},
  number    = {4},
  issn      = {1944-8201},
  doi       = {10.1193/100118EQS224DP},
  pages     = {1979 -- 2001},
  year      = {2019},
  language  = {en}
}
@inproceedings{WuttkeButenwegRosinetal.2019,
  author    = {Wuttke, Claudia and Butenweg, Christoph and Rosin, Julia and Kubalski, Thomas},
  title     = {Verbesserte seismische Nachweiskonzepte f{\"u}r Mauerwerksbauten in deutschen Erdbebengebieten},
  series = {Adam, Christoph (Hrsg.) ; Univ. Innsbruck: 16. D-A-CH Tagung Erdbebeningenieurwesen \& Baudynamik 2019 : 26. und 27. September 2019, Innsbruck},
  booktitle = {Adam, Christoph (Hrsg.) ; Univ. Innsbruck: 16. D-A-CH Tagung Erdbebeningenieurwesen \& Baudynamik 2019 : 26. und 27. September 2019, Innsbruck},
  address   = {Innsbruck},
  isbn      = {978-3-200-06454-6},
  pages     = {713 -- 722},
  year      = {2019},
  language  = {de}
}
@book{BroederBauschke2019,
  author    = {Br{\"o}der, Alois and Bauschke, Stefan M.},
  title     = {Strom-Messwandler: Informationen f{\"u}r Anwender},
  publisher = {Shaker},
  address   = {D{\"u}ren},
  isbn      = {978-3-8440-6233-5},
  pages     = {200 Seiten},
  year      = {2019},
  language  = {de}
}
@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@inproceedings{MarinkovićButenweg2019,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental and numerical analysis of RC frames with decoupled masonry infills},
  series = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-82844-5-6},
  issn      = {2623-3347},
  doi       = {10.7712/120119.7088.18845},
  pages     = {2464 -- 2479},
  year      = {2019},
  abstract  = {Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their poor behaviour is the connection to the frame, which is usually constructed using mortar. This paper describes the novel solution for infill/frame connection based on application of elastomeric material between them. The system called INODIS (Innovative Decoupled Infill System) has the aim to postpone the activation of infill in in-plane direction and at the same time to provide sufficient out-of-plane support. First, experimental tests on infilled frame specimens are presented and the comparison of the results between traditionally infilled frames and infilled frames with the INODIS system are given. The results are then used for calibration and validation of numerical model, which can be further employed for investigating the influence of some material parameters on the behaviour of infilled frames with the INODIS system.},
  language  = {en}
}