@article{AkimbekovDigelTastambeketal.2013,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, K. T. and Zhubanova, A. A.},
  title     = {Biocompatibility of carbonized rice husk with a rat heart cells line H9c2},
  series = {Experimental Biology},
  volume    = {59},
  journal   = {Experimental Biology},
  number    = {3/1},
  issn      = {1563-0218},
  pages     = {23 -- 25},
  year      = {2013},
  language  = {en}
}
@article{BhattaraiStaat2019,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse},
  series = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2168-1171},
  doi       = {10.1080/21681163.2019.1670095},
  year      = {2019},
  language  = {en}
}
@article{FrotscherStaat2014,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Stresses produced by different textile mesh implants in a tissue equivalent},
  series = {BioNanoMaterials},
  volume    = {15},
  journal   = {BioNanoMaterials},
  number    = {1-2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)},
  doi       = {10.1515/bnm-2014-0003},
  pages     = {25 -- 30},
  year      = {2014},
  abstract  = {Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.},
  language  = {en}
}
@article{VuStaatTran2007,
  author    = {Vu, Duc Khoi and Staat, Manfred and Tran, Ich Thinh},
  title     = {Analysis of pressure equipment by application of the primal-dual theory of shakedown},
  series = {Communications in Numerical Methods in Engineering. 23 (2007), H. 3},
  journal   = {Communications in Numerical Methods in Engineering. 23 (2007), H. 3},
  isbn      = {1069-8299},
  pages     = {213 -- 225},
  year      = {2007},
  language  = {en}
}
@article{StaatVu2006,
  author    = {Staat, Manfred and Vu, Khoi Duc},
  title     = {Limit loads of circumferentially flawed pipes and cylindrical vessels under internal pressure},
  series = {International Journal of Pressure Vessels and Piping. 83 (2006), H. 3},
  journal   = {International Journal of Pressure Vessels and Piping. 83 (2006), H. 3},
  isbn      = {0308-0161},
  pages     = {188 -- 196},
  year      = {2006},
  language  = {en}
}
@article{JungStaat2020,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Erratum to "Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue" [GAMM-Mitteilungen, (2019), 42, 4, 10.1002/gamm.201900002]},
  series = {GAMM-Mitteilungen},
  volume    = {43},
  journal   = {GAMM-Mitteilungen},
  number    = {4},
  publisher = {Wiley-VCH GmbH},
  address   = {Weinheim},
  issn      = {1522-2608},
  doi       = {10.1002/gamm.202000011},
  year      = {2020},
  language  = {en}
}
@article{RauschKahmannBaltschunetal.2020,
  author    = {Rausch, Valentin and Kahmann, Stephanie Lucina and Baltschun, Christoph and Staat, Manfred and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Pressure distribution to the distal biceps tendon at the radial tuberosity: a biomechanical study},
  series = {The Journal of Hand Surgery},
  volume    = {45},
  journal   = {The Journal of Hand Surgery},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2020.01.006},
  pages     = {776.e1 -- 776.e9},
  year      = {2020},
  abstract  = {Purpose Mechanical impingement at the narrow radioulnar space of the tuberosity is believed to be an etiological factor in the injury of the distal biceps tendon. The aim of the study was to compare the pressure distribution at the proximal radioulnar space between 2 fixation techniques and the intact state. Methods Six right arms and 6 left arms from 5 female and 6 male frozen specimens were used for this study. A pressure transducer was introduced at the height of the radial tuberosity with the intact distal biceps tendon and after 2 fixation methods: the suture-anchor and the cortical button technique. The force (N), maximum pressure (kPa) applied to the radial tuberosity, and the contact area (mm²) of the radial tuberosity with the ulna were measured and differences from the intact tendon were detected from 60° supination to 60° pronation in 15° increments with the elbow in full extension and in 45° and 90° flexion of the elbow. Results With the distal biceps tendon intact, the pressures during pronation were similar regardless of extension and flexion and were the highest at 60° pronation with 90° elbow flexion (23.3 ± 53.5 kPa). After repair of the tendon, the mean peak pressure, contact area, and total force showed an increase regardless of the fixation technique. Highest peak pressures were found using the cortical button technique at 45° flexion of the elbow and 60° pronation. These differences were significantly different from the intact tendon. The contact area was significantly larger in full extension and 15°, 30°, and 60° pronation using the cortical button technique. Conclusions Pressures on the distal biceps tendon at the radial tuberosity increase during pronation, especially after repair of the tendon. Clinical relevance Mechanical impingement could play a role in both the etiology of primary distal biceps tendon ruptures and the complications occurring after fixation of the tendon using certain techniques.},
  language  = {en}
}
@article{LehnertzBialonskiHorstmannetal.2009,
  author    = {Lehnertz, Klaus and Bialonski, Stephan and Horstmann, Marie-Therese and Krug, Dieter and Rothkegel, Alexander and Staniek, Matth{\"a}us and Wagner, Tobias},
  title     = {Synchronization phenomena in human epileptic brain networks},
  series = {Journal of neuroscience methods},
  volume    = {183},
  journal   = {Journal of neuroscience methods},
  number    = {1},
  issn      = {0165-0270},
  doi       = {10.1016/j.jneumeth.2009.05.015},
  pages     = {42 -- 48},
  year      = {2009},
  language  = {en}
}
@article{Staat2003,
  author    = {Staat, Manfred},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  year      = {2003},
  abstract  = {Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{StaatVu2007,
  author    = {Staat, Manfred and Vu, Duc-Khoi},
  title     = {Limit analysis of flaws in pressurized pipes and cylindrical vessels. Part I: Axial defects},
  series = {Engineering Fracture Mechanics. 74 (2007), H. 3},
  journal   = {Engineering Fracture Mechanics. 74 (2007), H. 3},
  isbn      = {0013-7944},
  pages     = {431 -- 450},
  year      = {2007},
  language  = {en}
}
@article{BornheimGriegerBlanecketal.2024,
  author    = {Bornheim, Tobias and Grieger, Niklas and Blaneck, Patrick Gustav and Bialonski, Stephan},
  title     = {Speaker Attribution in German Parliamentary Debates with QLoRA-adapted Large Language Models},
  series = {Journal for language technology and computational linguistics : JLCL},
  volume    = {37},
  journal   = {Journal for language technology and computational linguistics : JLCL},
  number    = {1},
  publisher = {Gesellschaft f{\"u}r Sprachtechnologie und Computerlinguistik},
  address   = {Regensburg},
  issn      = {2190-6858},
  doi       = {10.21248/jlcl.37.2024.244},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {The growing body of political texts opens up new opportunities for rich insights into political dynamics and ideologies but also increases the workload for manual analysis. Automated speaker attribution, which detects who said what to whom in a speech event and is closely related to semantic role labeling, is an important processing step for computational text analysis. We study the potential of the large language model family Llama 2 to automate speaker attribution in German parliamentary debates from 2017-2021. We fine-tune Llama 2 with QLoRA, an efficient training strategy, and observe our approach to achieve competitive performance in the GermEval 2023 Shared Task On Speaker Attribution in German News Articles and Parliamentary Debates. Our results shed light on the capabilities of large language models in automating speaker attribution, revealing a promising avenue for computational analysis of political discourse and the development of semantic role labeling systems.},
  language  = {en}
}
@article{VantStaatBaroud2008,
  author    = {Vant, Christianne and Staat, Manfred and Baroud, Gamal},
  title     = {Percutaneous Vertebroplasty: A Review of Two Intraoperative Complications},
  series = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  journal   = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-75408-4},
  pages     = {527 -- 539},
  year      = {2008},
  language  = {en}
}
@article{VuStaat2007,
  author    = {Vu, Duc Khoi and Staat, Manfred},
  title     = {Shakedown analysis of structures made of materials with temperature-dependent yield stress},
  series = {International Journal of Solids and Structures. 44 (2007), H. 13},
  journal   = {International Journal of Solids and Structures. 44 (2007), H. 13},
  isbn      = {0020-7683},
  pages     = {4524 -- 4540},
  year      = {2007},
  language  = {en}
}
@article{WarerkarSchmitzGoettscheetal.2011,
  author    = {Warerkar, Shashikant and Schmitz, Stefan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Reißel, Martin and Tamme, Rainer},
  title     = {Air-Sand Heat Exchanger for High-Temperature Storage},
  series = {Journal of Solar Energy Engineering. 133 (2011), H. 2},
  journal   = {Journal of Solar Energy Engineering. 133 (2011), H. 2},
  publisher = {ASME},
  address   = {New York},
  isbn      = {0199-6231},
  pages     = {021010},
  year      = {2011},
  language  = {en}
}
@article{PhamVuTranetal.2010,
  author    = {Pham, Phu Tinh and Vu, Khoi Duc and Tran, Thanh Ngoc and Staat, Manfred},
  title     = {A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies},
  pages     = {1 -- 7},
  year      = {2010},
  language  = {en}
}
@article{DoorschodtSchreinemachersBehbahanietal.2011,
  author    = {Doorschodt, B. M. and Schreinemachers, M. C. J. M. and Behbahani, Mehdi and Florquin, S. and Weis, J. and Staat, Manfred and Tolba, R. H.},
  title     = {Hypothermic machine perfusion of kidney grafts: which pressure is preferred},
  series = {Annals of Biomedical Engineering. 39 (2011), H. 3},
  journal   = {Annals of Biomedical Engineering. 39 (2011), H. 3},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1573-9686},
  pages     = {1051 -- 1059},
  year      = {2011},
  language  = {en}
}
@article{DigelZerlinTemizArtmannetal.2007,
  author    = {Digel, Ilya and Zerlin, Kay and Temiz Artmann, Ayseg{\"u}l and Engels, S.},
  title     = {Protein dynamics in thermosensation},
  series = {Regenerative medicine. 2 (2007), H. 5},
  journal   = {Regenerative medicine. 2 (2007), H. 5},
  isbn      = {1746-0751},
  pages     = {533 -- 533},
  year      = {2007},
  language  = {en}
}
@article{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  pages     = {1 -- 12},
  year      = {2010},
  language  = {en}
}
@article{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions},
  series = {Computational and Mathematical Methods in Medicine},
  volume    = {2018},
  journal   = {Computational and Mathematical Methods in Medicine},
  number    = {Article ID 9518076},
  publisher = {Hindawi},
  address   = {New York, NY},
  issn      = {1748-6718},
  doi       = {10.1155/2018/9518076},
  pages     = {1 -- 16},
  year      = {2018},
  abstract  = {After menopause, decreased levels of estrogen and progesterone remodel the collagen of the soft tissues thereby reducing their stiffness. Stress urinary incontinence is associated with involuntary urine leakage due to pathological movement of the pelvic organs resulting from lax suspension system, fasciae, and ligaments. This study compares the changes in the orientation and position of the female pelvic organs due to weakened fasciae, ligaments, and their combined laxity. A mixture theory weighted by respective volume fraction of elastin-collagen fibre compound (5\%), adipose tissue (85\%), and smooth muscle (5\%) is adopted to characterize the mechanical behaviour of the fascia. The load carrying response (other than the functional response to the pelvic organs) of each fascia component, pelvic organs, muscles, and ligaments are assumed to be isotropic, hyperelastic, and incompressible. Finite element simulations are conducted during Valsalva manoeuvre with weakened tissues modelled by reduced tissue stiffness. A significant dislocation of the urethrovesical junction is observed due to weakness of the fascia (13.89 mm) compared to the ligaments (5.47 mm). The dynamics of the pelvic floor observed in this study during Valsalva manoeuvre is associated with urethral-bladder hypermobility, greater levator plate angulation, and positive Q-tip test which are observed in incontinent females.},
  language  = {en}
}
@article{ColomboDriraFrotscheretal.2022,
  author    = {Colombo, Daniele and Drira, Slah and Frotscher, Ralf and Staat, Manfred},
  title     = {An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis},
  series = {International Journal for Numerical Methods in Engineering},
  volume    = {124},
  journal   = {International Journal for Numerical Methods in Engineering},
  number    = {2},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {1097-0207},
  doi       = {10.1002/nme.7126},
  pages     = {402 -- 433},
  year      = {2022},
  abstract  = {Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.},
  language  = {en}
}
@article{SavitskayaKistaubayevaIgnatovaetal.2019,
  author    = {Savitskaya, I.S. and Kistaubayeva, A.S. and Ignatova, L.V. and Digel, Ilya},
  title     = {Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells},
  series = {Heliyon},
  volume    = {5},
  journal   = {Heliyon},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8440},
  doi       = {10.1016/j.heliyon.2019.e02592},
  pages     = {Artikelnummer e02592},
  year      = {2019},
  language  = {en}
}
@article{NguyenDuongTranetal.2012,
  author    = {Nguyen, Nhu Huynh and Duong, Minh Tuan and Tran, Thanh Ngoc and Pham, Phu Tinh and Grottke, O. and Tolba, R. and Staat, Manfred},
  title     = {Influence of a freeze-thaw cycle on the stress-stretch curves of tissues of porcine abdominal organs},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {14},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.008},
  pages     = {2382 -- 2386},
  year      = {2012},
  abstract  = {The paper investigates both fresh porcine spleen and liver and the possible decomposition of these organs under a freeze-thaw cycle. The effect of tissue preservation condition is an important factor which should be taken into account for protracted biomechanical tests. In this work, tension tests were conducted for a large number of tissue specimens from twenty pigs divided into two groups of 10. Concretely, the first group was tested in fresh state; the other one was tested after a freeze-thaw cycle which simulates the conservation conditions before biomechanical experiments. A modified Fung model for isotropic behavior was adopted for the curve fitting of each kind of tissues. Experimental results show strong effects of the realistic freeze-thaw cycle on the capsule of elastin-rich spleen but negligible effects on the liver which virtually contains no elastin. This different behavior could be explained by the autolysis of elastin by elastolytic enzymes during the warmer period after thawing. Realistic biomechanical properties of elastin-rich organs can only be expected if really fresh tissue is tested. The observations are supported by tests of intestines.},
  language  = {en}
}
@article{StaatTrenzLohmannetal.2012,
  author    = {Staat, Manfred and Trenz, Eva and Lohmann, Philipp and Frotscher, Ralf and Klinge, Uwe and Tabaza, Ruth and Kirschner-Hermanns, Ruth},
  title     = {New measurements to compare soft tissue anchoring systems in pelvic floor surgery},
  series = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  volume    = {100B},
  journal   = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  number    = {4},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {1552-4981},
  doi       = {10.1002/jbm.b.32654},
  pages     = {924 -- 933},
  year      = {2012},
  abstract  = {Suburethral slings as well as different meshes are widely used treating stress urinary incontinence and prolaps in women. With the development of MiniSlings and special meshes using less alloplastic material anchorage systems become more important to keep devices in place and to put some tension especially on the MiniSlings. To date, there are many different systems of MiniSlings of different companies on the market which differ in the structure of the used meshes and anchors. A new objective measurement method to compare different properties of MiniSling systems (mesh and anchor) is presented in this article. Ballistic gelatine acts as soft tissue surrogate. Significant differences in parameters like pull-out strength of anchors or shrinkage of meshes under loading conditions have been determined. The form and size of the anchors as well as the structural stability of the meshes are decisive for a proper integration. The tested anchorings sytems showed markedly different mechanical function at their respective load bearing capacity. As the stable fixation of the device in tissue is a prerequisite for a permanet reinforcement, the proposed test system permits further optimisation of anchor and mesh devices to improve the success of the surgical treatment},
  language  = {en}
}
@article{NovacekTranKlingeetal.2012,
  author    = {Novacek, V. and Tran, Thanh Ngoc and Klinge, U. and Tolba, R. H. and Staat, Manfred and Bronson, D. G. and Miesse, A. M. and Whiffen, J. and Turquier, F.},
  title     = {Finite element modelling of stapled colorectal end-to-end anastomosis : Advantages of variable height stapler design},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {115},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.021},
  pages     = {2693 -- 2697},
  year      = {2012},
  abstract  = {The impact of surgical staplers on tissues has been studied mostly in an empirical manner. In this paper, finite element method was used to clarify the mechanics of tissue stapling and associated phenomena. Various stapling modalities and several designs of circular staplers were investigated to evaluate the impact of the device on tissues and mechanical performance of the end-to-end colorectal anastomosis. Numerical simulations demonstrated that a single row of staples is not adequate to resist leakage due to non-linear buckling and opening of the tissue layers between two adjacent staples. Compared to the single staple row configuration, significant increase in stress experienced by the tissue at the inner staple rows was observed in two and three rows designs. On the other hand, adding second and/or third staple row had no effect on strain in the tissue inside the staples. Variable height design with higher staples in outer rows significantly reduced the stresses and strains in outer rows when compared to the same configuration with flat cartridge.},
  language  = {en}
}
@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Direct finite element route for design-by-analysis of pressure components},
  year      = {2005},
  abstract  = {In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{HacklWegmannKahmannetal.2017,
  author    = {Hackl, Michael and Wegmann, Kilian and Kahmann, Stephanie Lucina and Heinze, Nicolai and Staat, Manfred and Neiss, Wolfram F. and Scaal, Martin and M{\"u}ller, Lars P.},
  title     = {Radial shortening osteotomy reduces radiocapitellar contact pressures while preserving valgus stability of the elbow},
  series = {Knee Surgery, Sports Traumatology, Arthroscopy},
  volume    = {25},
  journal   = {Knee Surgery, Sports Traumatology, Arthroscopy},
  number    = {7},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1433-7347},
  doi       = {10.1007/s00167-017-4468-z},
  pages     = {2280 -- 2288},
  year      = {2017},
  language  = {en}
}
@article{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Probabilistic limit and shakedown problems},
  series = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  journal   = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  pages     = {217 -- 268},
  year      = {2003},
  language  = {en}
}
@article{GeierBialonskiElgeretal.2015,
  author    = {Geier, Christian and Bialonski, Stephan and Elger, Christian E. and Lehnertz, Klaus},
  title     = {How important is the seizure onset zone for seizure dynamics?},
  series = {Seizure},
  volume    = {25},
  journal   = {Seizure},
  issn      = {1059-1311},
  doi       = {10.1016/j.seizure.2014.10.013},
  pages     = {160 -- 166},
  year      = {2015},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@article{GrajewskiHronTurek2006,
  author    = {Grajewski, Matthias and Hron, Jaroslav and Turek, Stefan},
  title     = {Numerical analysis for a new non-conforming linear finite element on quadrilaterals},
  series = {Journal of Computational and Applied Mathematics},
  volume    = {193},
  journal   = {Journal of Computational and Applied Mathematics},
  number    = {1},
  issn      = {0377-0427},
  doi       = {10.1016/j.cam.2005.05.024},
  pages     = {38 -- 50},
  year      = {2006},
  language  = {en}
}
@article{Staat1993,
  author    = {Staat, Manfred},
  title     = {Reliability of the Primary Circuit Pressure Boundary of an HTR-Module under Accident Conditions},
  series = {Safety and reliability assessment : an integral approach ; ESREL'93 ; proceedings of the European Safety and Reliability Conference, Munich, Germany, May 10th - 12th 1993 / Kafka, P. [ed]},
  journal   = {Safety and reliability assessment : an integral approach ; ESREL'93 ; proceedings of the European Safety and Reliability Conference, Munich, Germany, May 10th - 12th 1993 / Kafka, P. [ed]},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0-444-81561-9},
  pages     = {331 -- 342},
  year      = {1993},
  language  = {en}
}
@article{Staat2002,
  author    = {Staat, Manfred},
  title     = {Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis},
  series = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  journal   = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  isbn      = {0791846520},
  pages     = {177 -- 185},
  year      = {2002},
  language  = {en}
}
@article{StaatHeitzerReinersetal.2003,
  author    = {Staat, Manfred and Heitzer, M. and Reiners, H. and Schubert, F.},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  series = {Nuclear Engineering and Design. 225 (2003), H. 1},
  journal   = {Nuclear Engineering and Design. 225 (2003), H. 1},
  isbn      = {0029-5493},
  pages     = {11 -- 26},
  year      = {2003},
  language  = {en}
}
@article{MeyerGaalenLeschingeretal.2019,
  author    = {Meyer, Carolin and Gaalen, Kerstin van and Leschinger, Tim and Scheyerer, Max J. and Neiss, Wolfram F. and Staat, Manfred and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement},
  series = {BioMed Research International},
  journal   = {BioMed Research International},
  doi       = {10.1155/2019/9232813},
  pages     = {Article ID 9232813},
  year      = {2019},
  language  = {en}
}
@article{StadlerDigelArtmannetal.2008,
  author    = {Stadler, A. M. and Digel, Ilya and Artmann, Gerhard and Embs, Jan P. and Zaccai, Joe and B{\"u}ldt, Georg},
  title     = {Hemoglobin Dynamics in Red Blood Cells: Correlation to Body Temperature},
  series = {Biophysical Journal. 95 (2008), H. 11},
  journal   = {Biophysical Journal. 95 (2008), H. 11},
  isbn      = {1542-0086},
  pages     = {5449 -- 5461},
  year      = {2008},
  language  = {en}
}
@article{DigelWehlitzKayseretal.2018,
  author    = {Digel, Ilya and Wehlitz, V. and Kayser, Peter and Figiel-Lange, A. and Bassam, R. and Rundstedt, F. von},
  title     = {Suspension depletion approach for exemption of infected Solanum jasminoides cells from pospiviroids},
  series = {Plant Pathology},
  volume    = {67},
  journal   = {Plant Pathology},
  number    = {2},
  publisher = {Wiley},
  address   = {Oxford},
  issn      = {1365-3059},
  doi       = {10.1111/ppa.12750},
  pages     = {358 -- 365},
  year      = {2018},
  abstract  = {Despite numerous studies, viroid elimination from infected plants remains a very challenging task. This study introduces for the first time a novel 'suspension depletion' approach for exemption of Solanum jasminoides plants from viroids. The proposed method implies initial establishment of suspension cultures of the infected plant cells. The suspended cells were then physically treated (mild thermotherapy, 33 °C), which presumably delayed the replication of the viroid. The viroid concentration in the treated biomass was monitored weekly using pospiviroid-specific PCR. After 10-12 weeks of continuous treatment, a sufficient decrease in viroid concentration was observed such that the infection became undetectable by PCR. The treated single cells then gave rise to microcolonies on a solid culture medium and the obtained viroid-negative clones were further promoted to regenerate into viroid-free plants. Three years of accumulated experimental data suggests feasibility, broad applicability, and good efficacy of the proposed approach.},
  language  = {en}
}
@article{TranKreissigStaat2009,
  author    = {Tran, Thanh Ngoc and Kreißig, R. and Staat, Manfred},
  title     = {Probabilistic limit and shakedown analysis of thin plates and shells},
  series = {Structural safety. 31 (2009), H. 1},
  journal   = {Structural safety. 31 (2009), H. 1},
  publisher = {-},
  isbn      = {0167-4730},
  pages     = {1 -- 18},
  year      = {2009},
  language  = {en}
}
@article{BassamHeschelerTemizArtmannetal.2012,
  author    = {Bassam, Rasha and Hescheler, J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Digel, Ilya},
  title     = {Effects of spermine NONOate and ATP on the thermal stability of hemoglobin},
  series = {BMC Biophysics},
  volume    = {5},
  journal   = {BMC Biophysics},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {2046-1682},
  doi       = {10.1186/2046-1682-5-16},
  pages     = {Art. 16},
  year      = {2012},
  abstract  = {Background Minor changes in protein structure induced by small organic and inorganic molecules can result in significant metabolic effects. The effects can be even more profound if the molecular players are chemically active and present in the cell in considerable amounts. The aim of our study was to investigate effects of a nitric oxide donor (spermine NONOate), ATP and sodium/potassium environment on the dynamics of thermal unfolding of human hemoglobin (Hb). The effect of these molecules was examined by means of circular dichroism spectrometry (CD) in the temperature range between 25°C and 70°C. The alpha-helical content of buffered hemoglobin samples (0.1 mg/ml) was estimated via ellipticity change measurements at a heating rate of 1°C/min. Results Major results were: 1) spermine NONOate persistently decreased the hemoglobin unfolding temperature T u irrespectively of the Na + /K + environment, 2) ATP instead increased the unfolding temperature by 3°C in both sodium-based and potassium-based buffers and 3) mutual effects of ATP and NO were strongly influenced by particular buffer ionic compositions. Moreover, the presence of potassium facilitated a partial unfolding of alpha-helical structures even at room temperature. Conclusion The obtained data might shed more light on molecular mechanisms and biophysics involved in the regulation of protein activity by small solutes in the cell.},
  language  = {en}
}
@article{MansurovDigelBiisenbaevetal.2012,
  author    = {Mansurov, Z. and Digel, Ilya and Biisenbaev, M. and Savistkaya, I. and Kistaubaeva, A. and Akimbekov, Nuraly S. and Zhubanova, A.},
  title     = {Bio-composite material on the basis of carbonized rice husk in biomedicine and environmental applications},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {14},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {2522-4867},
  doi       = {10.18321/ectj105},
  pages     = {115 -- 131},
  year      = {2012},
  language  = {en}
}
@article{StaatTranKreissig2008,
  author    = {Staat, Manfred and Tran, Thanh Ngoc and Kreißig, R.},
  title     = {Load bearing capacity of thin shell structures made of elastoplastic material by direct methods},
  series = {Technische Mechanik. 28 (2008), H. 3-4},
  journal   = {Technische Mechanik. 28 (2008), H. 3-4},
  pages     = {299 -- 309},
  year      = {2008},
  language  = {en}
}
@article{StaatBallmann1988,
  author    = {Staat, Manfred and Ballmann, J.},
  title     = {Wave Propagation and Focussing in Plates},
  series = {Impact loading and dynamic behaviour of materials : Papers presented at the International Conference on Impact Loading and Dynamic Behaviour of Materials, Vol. 2 / Chiem, C. Y.; Kunze, L. (u.a.) [eds]},
  journal   = {Impact loading and dynamic behaviour of materials : Papers presented at the International Conference on Impact Loading and Dynamic Behaviour of Materials, Vol. 2 / Chiem, C. Y.; Kunze, L. (u.a.) [eds]},
  publisher = {DGM Informationsges.},
  address   = {Oberursel},
  year      = {1988},
  language  = {en}
}
@article{TranPhamVuetal.2009,
  author    = {Tran, Thanh Ngoc and Pham, Phu Tinh and Vu, D. K. and Staat, Manfred},
  title     = {Reliability Analysis of Inelastic Shell Structures Under Variable Loads},
  series = {Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter},
  journal   = {Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter},
  publisher = {Springer Netherland},
  address   = {Berlin},
  isbn      = {978-1-4020-9633-4},
  pages     = {135 -- 156},
  year      = {2009},
  language  = {en}
}
@article{Laack2013,
  author    = {Laack, Walter van},
  title     = {The genetic code should be seen as a positioning code},
  series = {British journal of arts and social sciences. Vol. 14 (2013), No. 1},
  journal   = {British journal of arts and social sciences. Vol. 14 (2013), No. 1},
  issn      = {2046-9578},
  pages     = {93 -- 97},
  year      = {2013},
  language  = {en}
}
@article{StaatHeitzer1999,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Structural Reliability Analysis of Elasto-Plastic Structures},
  series = {Safety and reliability : proceedings of ESREL '99, the Tenth European Conference on Safety and Reliability, Munich-Garching, Germany, 13 - 17 September 1999 / Schu{\"e}ller, G. I.; Kafka, P. [eds]},
  journal   = {Safety and reliability : proceedings of ESREL '99, the Tenth European Conference on Safety and Reliability, Munich-Garching, Germany, 13 - 17 September 1999 / Schu{\"e}ller, G. I.; Kafka, P. [eds]},
  publisher = {Balkema},
  address   = {Rotterdam},
  isbn      = {90-5809-109-0},
  pages     = {513 -- 518},
  year      = {1999},
  language  = {en}
}
@article{KleefeldReissel2011,
  author    = {Kleefeld, Andreas and Reißel, Martin},
  title     = {The Levenberg-Marquardt method applied to a parameter estimation problem arising from electrical resistivity tomography},
  series = {Applied Mathematics and Computation},
  volume    = {217},
  journal   = {Applied Mathematics and Computation},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0096-3003},
  pages     = {4490 -- 4501},
  year      = {2011},
  language  = {en}
}
@article{HacklNacovKammerlohretal.2021,
  author    = {Hackl, Michael and Nacov, Julia and Kammerlohr, Sandra and Staat, Manfred and Buess, Eduard and Leschinger, Tim and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure},
  series = {The American Journal of Sports Medicine},
  volume    = {49},
  journal   = {The American Journal of Sports Medicine},
  number    = {7},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211006138},
  pages     = {1847 -- 1853},
  year      = {2021},
  language  = {en}
}
@article{StadlerEmbsDigeletal.2008,
  author    = {Stadler, Andreas M. and Embs, Jan P. and Digel, Ilya and Artmann, Gerhard and Unruh, Tobias and B{\"u}ldt, Georg and Zaccai, Guiseppe},
  title     = {Cytoplasmic water and hydration layer dynamics in human red blood cells},
  series = {Journal of the American Chemical Society. 50 (2008), H. 130},
  journal   = {Journal of the American Chemical Society. 50 (2008), H. 130},
  isbn      = {1520-5126},
  pages     = {16852 -- 16853},
  year      = {2008},
  language  = {en}
}
@article{Staat2001,
  author    = {Staat, Manfred},
  title     = {Cyclic plastic deformation tests to verify FEM-based shakedown analyses},
  year      = {2001},
  abstract  = {Fatigue analyses are conducted with the aim of verifying that thermal ratcheting is limited. To this end it is important to make a clear distintion between the shakedown range and the ratcheting range (continuing deformation). As part of an EU-supported research project, experiments were carried out using a 4-bar model. The experiment comprised a water-cooled internal tube, and three insulated heatable outer test bars. The system was subjected to alternating axial forces, superimposed with alternating temperatures at the outer bars. The test parameters were partly selected on the basis of previous shakedown analyses. During the test, temperatures and strains were measured as a function of time. The loads and the resulting stresses were confirmed on an ongoing basis during performance of the test, and after it. Different material models were applied for this incremental elasto-plastic analysis using the ANSYS program. The results of the simulation are used to verify the FEM-based shakedown analysis.},
  subject      = {Materialerm{\"u}dung},
  language  = {en}
}
@article{MuschallikMolinnusJablonskietal.2020,
  author    = {Muschallik, Lukas and Molinnus, Denise and Jablonski, Melanie and Kipp, Carina Ronja and Bongaerts, Johannes and Pohl, Martina and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Selmer, Thorsten and Siegert, Petra},
  title     = {Synthesis of α-hydroxy ketones and vicinal (R, R)-diols by Bacillus clausii DSM 8716ᵀ butanediol dehydrogenase},
  series = {RSC Advances},
  volume    = {10},
  journal   = {RSC Advances},
  publisher = {Royal Society of Chemistry (RSC)},
  address   = {Cambridge},
  issn      = {2046-2069},
  doi       = {10.1039/D0RA02066D},
  pages     = {12206 -- 12216},
  year      = {2020},
  abstract  = {α-hydroxy ketones (HK) and 1,2-diols are important building blocks for fine chemical synthesis. Here, we describe the R-selective 2,3-butanediol dehydrogenase from B. clausii DSM 8716ᵀ (BcBDH) that belongs to the metal-dependent medium chain dehydrogenases/reductases family (MDR) and catalyzes the selective asymmetric reduction of prochiral 1,2-diketones to the corresponding HK and, in some cases, the reduction of the same to the corresponding 1,2-diols. Aliphatic diketones, like 2,3-pentanedione, 2,3-hexanedione, 5-methyl-2,3-hexanedione, 3,4-hexanedione and 2,3-heptanedione are well transformed. In addition, surprisingly alkyl phenyl dicarbonyls, like 2-hydroxy-1-phenylpropan-1-one and phenylglyoxal are accepted, whereas their derivatives with two phenyl groups are not substrates. Supplementation of Mn²⁺ (1 mM) increases BcBDH's activity in biotransformations. Furthermore, the biocatalytic reduction of 5-methyl-2,3-hexanedione to mainly 5-methyl-3-hydroxy-2-hexanone with only small amounts of 5-methyl-2-hydroxy-3-hexanone within an enzyme membrane reactor is demonstrated.},
  language  = {en}
}
@article{HorbachStaatPerezVianaetal.2020,
  author    = {Horbach, Andreas and Staat, Manfred and Perez-Viana, Daniel and Simmen, Hans-Peter and Neuhaus, Valentin and Pape, Hans-Christoph and Prescher, Andreas and Ciritsis, Bernhard},
  title     = {Biomechanical in vitro examination of a standardized low-volume tubular femoroplasty},
  series = {Clinical Biomechanics},
  volume    = {80},
  journal   = {Clinical Biomechanics},
  number    = {Art. 105104},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.clinbiomech.2020.105104},
  year      = {2020},
  abstract  = {Background Osteoporosis is associated with the risk of fractures near the hip. Age and comorbidities increase the perioperative risk. Due to the ageing population, fracture of the proximal femur also proves to be a socio-economic problem. Preventive surgical measures have hardly been used so far. Methods 10 pairs of human femora from fresh cadavers were divided into control and low-volume femoroplasty groups and subjected to a Hayes fall-loading fracture test. The results of the respective localization and classification of the fracture site, the Singh index determined by computed tomography (CT) examination and the parameters in terms of fracture force, work to fracture and stiffness were evaluated statistically and with the finite element method. In addition, a finite element parametric study with different position angles and variants of the tubular geometry of the femoroplasty was performed. Findings Compared to the control group, the work to fracture could be increased by 33.2\%. The fracture force increased by 19.9\%. The used technique and instrumentation proved to be standardized and reproducible with an average poly(methyl methacrylate) volume of 10.5 ml. The parametric study showed the best results for the selected angle and geometry. Interpretation The cadaver studies demonstrated the biomechanical efficacy of the low-volume tubular femoroplasty. The numerical calculations confirmed the optimal choice of positioning as well as the inner and outer diameter of the tube in this setting. The standardized minimally invasive technique with the instruments developed for it could be used in further comparative studies to confirm the measured biomechanical results.},
  language  = {en}
}