@inproceedings{MarinkovićButenweg2020,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Out-of-plane behavior of decoupled masonry infills under seismic loading},
  series = {Proceedings of the 17th World Conference on Earthquake Engineering},
  booktitle = {Proceedings of the 17th World Conference on Earthquake Engineering},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding reinforced concrete frame, thus changing dynamic characteristics of the structure. Consequently, masonry infills cannot be neglected in the design process. However, although the relevant standards contain requirements for infill walls, they do not describe how these requirements are to be met concretely. This leads in practice to the fact that the infill walls are neither dimensioned nor constructed correctly. The evidence of this fact is confirmed by the recent earthquakes, which have led to enormous damages, sometimes followed by the total collapse of buildings and loss of human lives. Recently, the increasing effort has been dedicated to the approach of decoupling of masonry infills from the frame elements by introducing the gap in between. This helps in removing the interaction between infills and frame, but raises the question of out-of-plane stability of the panel. This paper presents the results of the experimental campaign showing the out-of-plane behavior of masonry infills decoupled with the system called INODIS (Innovative decoupled infill system), developed within the European project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings). Full scale specimens were subjected to the different loading conditions and combinations of in-plane and out-of-plane loading. Out-of-plane capacity of the masonry infills with the INODIS system is compared with traditionally constructed infills, showing that INODIS system provides reliable out-of-plane connection under various loading conditions. In contrast, traditional infills performed very poor in the case of combined and simultaneously applied in-plane and out-of-plane loading, experiencing brittle behavior under small in-plane drifts followed by high out-of-plane displacements. Decoupled infills with the INODIS system have remained stable under out-of-plane loads, even after reaching high in-plane drifts and being damaged.},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2018,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative System for Earthquake Resistant Masonry Infill Walls},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays},
  series = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  booktitle = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  publisher = {CRC Press},
  address   = {London},
  doi       = {10.1201/9781003098508-72},
  pages     = {1 -- 7},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the surrounding RC frame performed rather poor in past earthquakes. Masonry infills showed severe in-plane damages and failed in many cases under out-of-plane seismic loading. As the undesired interactions between frames and infills changes the load transfer on building level, complete collapses of buildings were observed. A possible solution is uncoupling of masonry infills to the frame to reduce the infill contribution activated by the frame deformation under horizontal loading. The paper presents numerical simulations on RC frames equipped with the innovative decoupling system INODIS. The system was developed within the European project INSYSME and allows an effective uncoupling of frame and infill. The simulations are carried out with a micro-modelling approach, which is able to predict the complex nonlinear behaviour resulting from the different materials and their interaction. Each brick is modelled individually and connected taking into account nonlinearity of a brick mortar interface. The calibration of the model is based on small specimen tests and experimental results for one bay one storey frame are used for the validation. The validated model is further used for parametric studies on two storey and two bay infilled frames. The response and change of the structural stiffness are analysed and compared to the traditionally infilled frame. The results confirm the effectiveness of the INODIS system with less damage and relatively low contribution of the infill at high drift levels. In contrast to the uncoupled system configurations, traditionally infilled frames experienced brittle failure at rather low drift levels.},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@inproceedings{MahdiDerschSchmitzetal.2022,
  author    = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Chico Caminos, Ricardo Alexander and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno},
  title     = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086269},
  pages     = {11 Seiten},
  year      = {2022},
  abstract  = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).},
  language  = {en}
}
@inproceedings{LuBeyerBosiljkovetal.2016,
  author    = {Lu, S. and Beyer, K. and Bosiljkov, V. and Butenweg, Christoph and D'Ayala, D. and Degee, H. and Gams, M. and Klouda, J. and Lagomarsino, S. and Penna, A. and Mojsilovic, N. and da Porto, F. and Sorrentino, L. and Vintzileou, E.},
  title     = {Next generation of Eurocode 8, masonry chapter},
  series = {Brick and Block Masonry Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  booktitle = {Brick and Block Masonry Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  editor    = {Modena, Claudio and da Porto, F. and Valluzzi, M.R.},
  publisher = {Taylor \& Francis},
  address   = {London},
  isbn      = {978-1-138-02999-6 (Print)},
  pages     = {695 -- 700},
  year      = {2016},
  abstract  = {This paper describes the procedure on the evaluation of the masonry chapter for the next generation of Eurocode 8, the European Standard for earthquake-resistant design. In CEN, TC 250/SC8, working group WG 1 has been established to support the subcommittee on the topic of masonry on both design of new structures (EN1998-1) and assessment of existing structures (EN1998-3). The aim is to elaborate suggestions for amendments which fit the current state of the art in masonry and earthquake-resistant design. Focus will be on modelling, simplified methods, linear-analysis (q-values, overstrength-values), nonlinear procedures, out-of-plane design as well as on clearer definition of limit states. Beside these, topics related to general material properties, reinforced masonry, confined masonry, mixed structures and non-structural infills will be covered too. This paper presents the preliminary work and results up to the submission date.},
  language  = {en}
}
@inproceedings{LoPiparoKernMazzetti2012,
  author    = {Lo Piparo, G. B. and Kern, Alexander and Mazzetti, C.},
  title     = {Some masterpoints about risk due to lightning},
  series = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  booktitle = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Lightning Protection <2012, Wien>},
  isbn      = {978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)},
  pages     = {1 -- 6},
  year      = {2012},
  language  = {en}
}
@inproceedings{LeichtScholtenSteuerDankertBouffier2016,
  author    = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda and Bouffier, Anna},
  title     = {Facing Future Challenges: Building Engineers for Tomorrow},
  series = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  booktitle = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  isbn      = {978-886292-705-5},
  pages     = {32 -- 37},
  year      = {2016},
  abstract  = {Future engineers are increasingly confronted with the so-called Megatrends which are the big social challenges society has to cope with. These Megatrends, such as "Silver Society", "Globalization", "Mobility" and "Female Shift" require an application-oriented perspective on Diversity especially in the engineering field. Therefore, it is necessary to enable future engineers not only to look at the technical perspectives of a problem, but also to be able to see the related questions within societies they are developing their artefacts for. The aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. Bringing together technical knowledge and social competences which go beyond a mere training of the so-called "soft skills", is a new approach followed at RWTH Aachen University, one of the leading technical universities in Germany. RWTH Aachen University has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. In the frame of a sustainable teaching concept the research group under the leadership of Prof. Carmen Leicht-Scholten has developed an approach which imparts a supplication-specific Gender and Diversity expertise to engineers. In workshops students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge in their special field of study and later work. To substantiate this, the course participants have to solve case studies from real life. The cases which are developed in collaboration with non-profit organizations and enterprises from economy rise the students to challenges which are inspired by professional life. Evaluation shows the success of this approach as well as an increasing demand for such teaching formats.},
  language  = {en}
}
@inproceedings{LatzkeAlexopoulosKronhardtetal.2015,
  author    = {Latzke, Markus and Alexopoulos, Spiros and Kronhardt, Valentina and Rend{\´o}n, Carlos and Sattler, Johannes Christoph},
  title     = {Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver},
  series = {Energy Procedia},
  booktitle = {Energy Procedia},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2015.03.142},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@inproceedings{LahrsKrisamHerrmann2023,
  author    = {Lahrs, Lennart and Krisam, Pierre and Herrmann, Ulf},
  title     = {Envisioning a collaborative energy system planning platform for the energy transition at the district level},
  series = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  booktitle = {ECOS 2023. The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  publisher = {Procedings of ECOS 2023},
  doi       = {10.52202/069564-0284},
  pages     = {3163 -- 3170},
  year      = {2023},
  abstract  = {Residential and commercial buildings account for more than one-third of global energy-related greenhouse gas emissions. Integrated multi-energy systems at the district level are a promising way to reduce greenhouse gas emissions by exploiting economies of scale and synergies between energy sources. Planning district energy systems comes with many challenges in an ever-changing environment. Computational modelling established itself as the state-of-the-art method for district energy system planning. Unfortunately, it is still cumbersome to combine standalone models to generate insights that surpass their original purpose. Ideally, planning processes could be solved by using modular tools that easily incorporate the variety of competing and complementing computational models. Our contribution is a vision for a collaborative development and application platform for multi-energy system planning tools at the district level. We present challenges of district energy system planning identified in the literature and evaluate whether this platform can help to overcome these challenges. Further, we propose a toolkit that represents the core technical elements of the platform. Lastly, we discuss community management and its relevance for the success of projects with collaboration and knowledge sharing at their core.},
  language  = {en}
}
@inproceedings{KumaranGopinathanRazalietal.2013,
  author    = {Kumaran, P. and Gopinathan, M. and Razali, N. M. and Kuperjans, Isabel and Hariffin, B. and Hamdan, H.},
  title     = {Preliminary evaluation of atomization characteristics of improved biodiesel for gas turbine application},
  series = {IOP Conference Series: Earth and Environmental Science (EES)},
  volume    = {16},
  booktitle = {IOP Conference Series: Earth and Environmental Science (EES)},
  number    = {1},
  publisher = {Institute of Physics Publishing (IOP)},
  address   = {London [u.a.]},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/16/1/012014},
  pages     = {012014/1 -- 012014/4},
  year      = {2013},
  language  = {en}
}
@inproceedings{KuhlmannButenwegLopezetal.2004,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Lopez, Marijen and Fernandez, Sebastian},
  title     = {Seismic vulnerability assessment of the historic Aachen Cathedral},
  series = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  booktitle = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  publisher = {CAEE},
  address   = {Vancouver},
  organization    = {World Conference on Earthquake Engineering <13, 2004, Vancouver>},
  pages     = {1 -- 14},
  year      = {2004},
  language  = {en}
}
@inproceedings{KubalskiMarinkovićButenweg2016,
  author    = {Kubalski, T. and Marinković, Marko and Butenweg, Christoph},
  title     = {Numerical investigation of masonry infilled R.C. frames},
  series = {Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  booktitle = {Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  editor    = {Modena, Claudio},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781315374963},
  pages     = {1219 -- 1226},
  year      = {2016},
  language  = {en}
}
@inproceedings{KubalskiButenwegMarinkovićetal.2017,
  author    = {Kubalski, T. and Butenweg, Christoph and Marinković, Marko and Klinkel, S.},
  title     = {Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.},
  language  = {en}
}
@inproceedings{KonradChudobaButenwegetal.2003,
  author    = {Konrad, M. and Chudoba, Rostislav and Butenweg, Christoph and Bruckermann, O.},
  title     = {Textile reinforced concrete. Part II: Multi-level modeling concept},
  series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  publisher = {IKM},
  address   = {Weimar},
  organization    = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>},
  pages     = {1 -- 11},
  year      = {2003},
  language  = {en}
}
@inproceedings{KobGoemmelButenwegetal.2006,
  author    = {Kob, Malte and G{\"o}mmel, Andreas and Butenweg, Christoph and Niendorf, Thoralf},
  title     = {Training of a combined model of larynx and vocal folds with data from MRI measurements},
  series = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  booktitle = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  organization    = {International Conference on Voice Physiology and Biomechanics <5, 2006, Tokyo>},
  pages     = {45 -- 46},
  year      = {2006},
  language  = {en}
}
@inproceedings{KobButenweg2004,
  author    = {Kob, Malte and Butenweg, Christoph},
  title     = {A finite element model of the interaction between intra-and extralaryngeal muscles},
  series = {International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France},
  booktitle = {International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France},
  organization    = {International Conference on Voice Physiology and Biomechanics <2004, Marseille>},
  pages     = {1 -- 2},
  year      = {2004},
  language  = {en}
}
@inproceedings{KernSchelthoffMathieu2012,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model},
  series = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  booktitle = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Lightning Protection <2012, Wien>},
  isbn      = {978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)},
  pages     = {1 -- 6},
  year      = {2012},
  language  = {en}
}
@inproceedings{KernKrichelMueller2001,
  author    = {Kern, Alexander and Krichel, Frank and M{\"u}ller, Klaus-Peter},
  title     = {Lightning protection design of a renewable energy hybrid-system without power mains connection},
  year      = {2001},
  abstract  = {In the year 2000 a direct lightning strike to the hybridsystem without power mains connection VATALI on the Greek island Crete results in the destruction and damage of some mechanical and electrical components. The hybrid-system VATALI was not lightning protected at that time. The hardware damage costs are approx. 60,000 €. The exposed site of the hybrid-system on top of a mountain was and still is the reason for a high risk of lightning strikes. Also in the future further lightning strikes have to be taken into consideration. In the paper a fundamental lightning protection design concept for renewable energy hybrid-systems without power mains connection and protection measures against direct strikes and overvoltages are shown in detail. The design concept was realized exemplarily for the hybrid-system VATALI. The hardware costs for the protection measures were about 15,000 €. About 50\% of the costs are due to protection measures against direct strikes, 50\% are due to overvoltage protection. Future extensions, new installations, or modifications have to be included into the lightning protection design concept of the hybrid-system.},
  language  = {en}
}
@inproceedings{KernKrichel2002,
  author    = {Kern, Alexander and Krichel, Frank},
  title     = {Considerations about the lightning protection system of mains independent renewable energy hybrid-systems - practical experiences},
  year      = {2002},
  abstract  = {In the paper a lightning protection design concept for renewable energy hybrid-systems without power mains connection is described. Based on a risk analysis protection measures against direct strikes and overvoltages are shown in an overview. The design concept is realized exemplarily for the hybrid-system VATALI on the Greek island Crete. VATALI, not lightning protected at that time, was a victim of a lightning strike in the year 2000 causing destructions and damages of some mechanical and electrical components with costs of approx. 60.000 €. The hardware costs for the protection measures were about 15.000 €: about 50\% of the costs are due to protection measures against direct strikes, 50\% are due to overvoltage protection.},
  language  = {en}
}
@inproceedings{KernImaniVashianiTimmermanns2021,
  author    = {Kern, Alexander and Imani Vashiani, Anahita and Timmermanns, Tobias},
  title     = {Threat for human beings due to touch voltages and body currents caused by direct lightning strikes in case of non-isolated lightning protection systems using natural components},
  series = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  booktitle = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-6654-2346-5},
  doi       = {10.1109/ICLPandSIPDA54065.2021.9627465},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {For typical cases of non-isolated lightning protection systems (LPS) the impulse currents are investigated which may flow through a human body directly touching a structural part of the LPS. Based on a basic LPS model with conventional down-conductors especially the cases of external and internal steel columns and metal fa{\c{c}}ades are considered and compared. Numerical simulations of the line quantities voltages and currents in the time domain are performed with an equivalent circuit of the entire LPS. As a result it can be stated that by increasing the number of conventional down-conductors and external steel columns the threat for a human being can indeed be reduced, but not down to an acceptable limit. In case of internal steel columns used as natural down-conductors the threat can be reduced sufficiently, depending on the low-resistive connection of the steel columns to the lightning equipotential bonding or the earth termination system, resp. If a metal fa{\c{c}}ade is used the threat for human beings touching is usually very low, if the fa{\c{c}}ade is sufficiently interconnected and multiply connected to the lightning equipotential bonding or the earth termination system, resp.},
  language  = {en}
}
@inproceedings{KernHeidlerSeeversetal.2004,
  author    = {Kern, Alexander and Heidler, Fridolin and Seevers, M. and Zischank, Wolfgang J.},
  title     = {Magnetic Fields and Induced Voltages in case of a Direct Strike - Comparison of Results obtained from Measurements at a Scaled Building to those of IEC 62305-4},
  isbn      = {0304-3886},
  year      = {2004},
  abstract  = {In the paper the results obtained from experiments at a modelled reinforced building in case of a direct lightning strike are compared with calculations. The comparison includes peak values of the magnetic field Hmax, its derivative (dH/dt)max and of induced voltages umax in typical cable routings. The experiments are performed at a 1:6 scaled building and the results are extrapolated using the similarity relations theory. The calculations are based on the approximate formulae given in IEC 62305-4 and have to be supplemented by a rough estimation of the additional shielding effect of a second reinforcement layer. The comparison shows, that the measured peak values of the magnetic field and its derivative are mostly lower than the calculated. The induced voltages are in good agreement. Hence, calculations of the induced voltages based on IEC 62305-4 are a good method for lightning protection studies of buildings, where the reinforcement is used as a grid-like electromagnetic shield.},
  subject      = {Blitz},
  language  = {en}
}
@inproceedings{KernDikta2009,
  author    = {Kern, Alexander and Dikta, Gerhard},
  title     = {Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies},
  year      = {2009},
  abstract  = {In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.},
  subject      = {Blitzschutz},
  language  = {en}
}
@inproceedings{KernBraun2014,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Risk management according to IEC 62305-2 edition 2: 2010-12 assessment of structures with a risk of explosion},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1237 -- 1242},
  year      = {2014},
  abstract  = {Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic "Structures with a risk of explosion" in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.},
  language  = {en}
}
@inproceedings{KarimiButenwegToll2005,
  author    = {Karimi, Iman and Butenweg, Christoph and Toll, Britta},
  title     = {Vulnerability assessment of industrial facilities},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.34},
  pages     = {34, 73 -- 75},
  year      = {2005},
  language  = {en}
}
@inproceedings{KalkerTollHolleretal.2004,
  author    = {Kalker, Ines and Toll, B. and Holler, Stefan and Butenweg, Christoph and Topping, B. H. V. and Mota Soares, C. A.},
  title     = {Capacity analysis of textile retrofitted unreinforced masonry},
  series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <7, 2004, Lissabon>},
  isbn      = {0-948749-95-4},
  doi       = {10.4203/ccp.79.194},
  pages     = {431 -- 432},
  year      = {2004},
  language  = {en}
}
@inproceedings{KalkerNeumannButenwegetal.2005,
  author    = {Kalker, Ines and Neumann, M. and Butenweg, Christoph and Holler, Stefan},
  title     = {Modelling of textile strengthened masonry},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.184},
  pages     = {447 -- 448},
  year      = {2005},
  language  = {en}
}
@inproceedings{HoeflerKneerGrossetal.2015,
  author    = {H{\"o}fler, M. and Kneer, R. and Groß, Rolf Fritz and Kehrmann, K.},
  title     = {Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows},
  series = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  booktitle = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  editor    = {Vorobieff, P.},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-84564-946-3 (Print-Ausgabe)},
  issn      = {1746-4471},
  pages     = {89 -- 101},
  year      = {2015},
  language  = {en}
}
@inproceedings{HollerButenwegNohetal.2002,
  author    = {Holler, S. and Butenweg, Christoph and Noh, S.-Y. and Meskouris, Konstantin},
  title     = {Numerical simulation of textile-reinforced concrete structures},
  series = {Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)},
  booktitle = {Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <6, 2002, Prag>},
  isbn      = {0-948749-83-0},
  pages     = {287 -- 288},
  year      = {2002},
  language  = {en}
}
@inproceedings{HellmannsHartungDilgeretal.2009,
  author    = {Hellmanns, Mark and Hartung, I. and Dilger, Klaus and B{\"o}hm, Stefan},
  title     = {Quality assurance of manual guided joining and welding devices},
  series = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore},
  booktitle = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore},
  publisher = {International Institute of Welding},
  address   = {Roissy},
  isbn      = {9789810832605},
  pages     = {219 -- 222},
  year      = {2009},
  language  = {en}
}
@inproceedings{HellmannsBoehmDilger2008,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Weight and noise reduction in power transmissions through epoxy resin foams},
  series = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  booktitle = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  publisher = {Adhesion Society},
  address   = {Blacksburg},
  organization    = {Adhesion Society},
  pages     = {291 -- 293},
  year      = {2008},
  language  = {en}
}
@inproceedings{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control},
  series = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  booktitle = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  publisher = {Adhesion Society},
  address   = {Blacksburg, Va.},
  organization    = {Adhesion Society},
  issn      = {1086-9506},
  pages     = {68 -- 70},
  year      = {2006},
  language  = {en}
}
@inproceedings{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Progress of the manual application of adhesives},
  series = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China},
  booktitle = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China},
  publisher = {Beijing Adhesion Society of China},
  address   = {Beijing},
  pages     = {275 -- 277},
  year      = {2006},
  language  = {en}
}
@inproceedings{HartungDilgerHellmannsetal.2009,
  author    = {Hartung, I. and Dilger, Klaus and Hellmanns, Mark and B{\"o}hme, Stefan},
  title     = {Repair of non-weldable steel structures to extend the life cycle},
  series = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  booktitle = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  organization    = {International Institute of Welding},
  isbn      = {978-981-08-3259-9},
  pages     = {569 -- 574},
  year      = {2009},
  language  = {en}
}
@inproceedings{HardtAbdelGawadMartinetal.1975,
  author    = {Hardt, Arno and Abdel-Gawad, A and Martin, S. and Reich, J.},
  title     = {Design procedures for the Juelich QQDDQ high resolution spectrometer},
  series = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  booktitle = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  pages     = {45 -- 51},
  year      = {1975},
  language  = {en}
}
@inproceedings{HandschuhStollenwerkBorchert2021,
  author    = {Handschuh, Nils and Stollenwerk, Dominik and Borchert, J{\"o}rg},
  title     = {Operation of thermal storage power plants under high renewable grid penetration},
  series = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems},
  booktitle = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-5651-3},
  pages     = {261 -- 265},
  year      = {2021},
  abstract  = {The planned coal phase-out in Germany by 2038 will lead to the dismantling of power plants with a total capacity of approx. 30 GW. A possible further use of these assets is the conversion of the power plants to thermal storage power plants; the use of these power plants on the day-ahead market is considerably limited by their technical parameters. In this paper, the influence of the technical boundary conditions on the operating times of these storage facilities is presented. For this purpose, the storage power plants were described as an MILP problem and two price curves, one from 2015 with a relatively low renewable penetration (33 \%) and one from 2020 with a high renewable energy penetration (51 \%) are compared. The operating times were examined as a function of the technical parameters and the critical influencing factors were investigated. The thermal storage power plant operation duration and the energy shifted with the price curve of 2020 increases by more than 25 \% compared to 2015.},
  language  = {en}
}
@inproceedings{HaissigDoerenStadler1981,
  author    = {Haissig, M. and D{\"o}ren, Horst-Peter and Stadler, P.},
  title     = {The horizontal continuous casting process of steel - a contribution to the economic production of unalloyed, alloyed and high alloyed steel},
  series = {VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universit{\"a}t Linz},
  booktitle = {VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universit{\"a}t Linz},
  address   = {Linz},
  pages     = {Vortrag 21},
  year      = {1981},
  language  = {en}
}
@inproceedings{GoemmelNiendorfFrauenrathetal.2010,
  author    = {G{\"o}mmel, Andreas and Niendorf, Thoralf and Frauenrath, Tobias and Otten, Mario and Butenweg, Christoph and Kob, Malte},
  title     = {3D vocal fold geometry mapping using Magnetic Resonance Imaging},
  series = {Fortschritte der Akustik : 36. Deutsche Jahrestagung f{\"u}r Akustik, Band 1},
  booktitle = {Fortschritte der Akustik : 36. Deutsche Jahrestagung f{\"u}r Akustik, Band 1},
  publisher = {Deutsche Gesellschaft f{\"u}r Akustik},
  address   = {Berlin},
  organization    = {Deutsche Jahrestagung f{\"u}r Akustik <36, 2010, Berlin>},
  isbn      = {978-3-9808659-8-2},
  pages     = {271 -- 272},
  year      = {2010},
  language  = {en}
}
@inproceedings{GoemmelKraemerButenwegetal.2005,
  author    = {G{\"o}mmel, Andreas and Kr{\"a}mer, Sebastian and Butenweg, Christoph and Kob, Malte},
  title     = {A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers},
  series = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  booktitle = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  publisher = {OPAKFI Tud. Egyes{\"u}let},
  address   = {Budapest},
  organization    = {Forum Acusticum <4, 2005, Budapest>},
  isbn      = {978-963-8241-68-9},
  pages     = {2759 -- 2764},
  year      = {2005},
  language  = {en}
}
@inproceedings{GoemmelKobNiendorfetal.2009,
  author    = {G{\"o}mmel, Andreas and Kob, Malte and Niendorf, Thoralf and Butenweg, Christoph},
  title     = {An approach for numerical calculation of glottal flow during glottal closure},
  series = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  booktitle = {Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone},
  publisher = {DEGA},
  address   = {Berlin},
  organization    = {NAG DAGA <2009, Rotterdam>},
  isbn      = {978-3-9808659-6-8},
  pages     = {1722 -- 1725},
  year      = {2009},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2005,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Kob, Malte},
  title     = {Towards a complete finite-element model of human phonation: modeling phonatory maneuvers},
  series = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  booktitle = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  publisher = {Univ., Dep. of Orthodontics},
  address   = {Ulm},
  organization    = {Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields <12, 2005, Ulm>},
  isbn      = {978-3-9806183-8-0},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2007,
  author    = {G{\"o}mmel, A. and Butenweg, Christoph and Kob, M.},
  title     = {A fluid-structure interaction model of vocal fold oscillation},
  series = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  booktitle = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  isbn      = {978-888453674-7},
  pages     = {127 -- 128},
  year      = {2007},
  abstract  = {Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.},
  language  = {en}
}
@inproceedings{GrunendahldeRochefortButenweg2005,
  author    = {Grunendahl, A. and de Rochefort, E. and Butenweg, Christoph},
  title     = {Numerical models for investigating the causes of low back pain due to whole-body vibrations},
  series = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  booktitle = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  publisher = {IST Press},
  address   = {Lisbon},
  organization    = {International Conference on Computational Bioengineering <2, 2005, Lissabon>},
  isbn      = {978-972-8469-37-3},
  pages     = {905 -- 914},
  year      = {2005},
  language  = {en}
}
@inproceedings{GorzalkaDahlkeGoettscheetal.2018,
  author    = {Gorzalka, Philip and Dahlke, Dennis and G{\"o}ttsche, Joachim and Israel, Martin and Patel, Dhruvkumar and Prahl, Christoph and Schmiedt, Jacob Estevam and Frommholz, Dirk and Hoffschmidt, Bernhard and Linkiewicz, Magdalena},
  title     = {Building Tomograph-From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input},
  series = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  booktitle = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  pages     = {17 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{GoldbachAment2010,
  author    = {Goldbach, Daniel and Ament, Christoph},
  title     = {Stabilized reversing with vehicle trailer combinations},
  series = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  booktitle = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  editor    = {Scharff, Peter},
  publisher = {Verl. ISLE},
  address   = {Ilmenau},
  organization    = {Technische Universit{\"a}t <Ilmenau> / Fakult{\"a}t f{\"u}r Informatik und Automatisierung},
  isbn      = {978-3-938843-53-6},
  pages     = {352 -- 357},
  year      = {2010},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Numerical calibration of a macro-element for vaultes system in historic churches},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{GellertParkButenweg2010,
  author    = {Gellert, Christoph and Park, Jin and Butenweg, Christoph},
  title     = {Seismic safety verification of masonry structures},
  series = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  booktitle = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  publisher = {ARGE 8IMC Dresden},
  address   = {Radebeul},
  organization    = {International Masonry Conference <8, 2010, Dresden>},
  isbn      = {978-3-00-031381-3},
  pages     = {813 -- 822},
  year      = {2010},
  language  = {en}
}
@inproceedings{GellertNordaButenweg2008,
  author    = {Gellert, Christoph and Norda, Hannah and Butenweg, Christoph},
  title     = {Nonlinear behaviour of masonry under cyclic loading},
  series = {7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton},
  booktitle = {7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton},
  organization    = {European Conference on Structural Dynamics, EURODYN <7, 2008, Southampton>},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{GedleSchmitzGielenetal.2022,
  author    = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Chico Caminos, Ricardo Alexander and Dersch, J{\"u}rgen},
  title     = {Analysis of an integrated CSP-PV hybrid power plant},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086236},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.},
  language  = {en}
}