@article{RoehlenPilasDahmenetal.2018,
  author    = {R{\"o}hlen, Desiree and Pilas, Johanna and Dahmen, Markus and Keusgen, Michael and Selmer, Thorsten and Sch{\"o}ning, Michael Josef},
  title     = {Toward a Hybrid Biosensor System for Analysis of Organic and Volatile Fatty Acids in Fermentation Processes},
  series = {Frontiers in Chemistry},
  journal   = {Frontiers in Chemistry},
  number    = {6},
  publisher = {Frontiers},
  address   = {Lausanne},
  doi       = {10.3389/fchem.2018.00284},
  pages     = {Artikel 284},
  year      = {2018},
  abstract  = {Monitoring of organic acids (OA) and volatile fatty acids (VFA) is crucial for the control of anaerobic digestion. In case of unstable process conditions, an accumulation of these intermediates occurs. In the present work, two different enzyme-based biosensor arrays are combined and presented for facile electrochemical determination of several process-relevant analytes. Each biosensor utilizes a platinum sensor chip (14 × 14 mm²) with five individual working electrodes. The OA biosensor enables simultaneous measurement of ethanol, formate, d- and l-lactate, based on a bi-enzymatic detection principle. The second VFA biosensor provides an amperometric platform for quantification of acetate and propionate, mediated by oxidation of hydrogen peroxide. The cross-sensitivity of both biosensors toward potential interferents, typically present in fermentation samples, was investigated. The potential for practical application in complex media was successfully demonstrated in spiked sludge samples collected from three different biogas plants. Thereby, the results obtained by both of the biosensors were in good agreement to the applied reference measurements by photometry and gas chromatography, respectively. The proposed hybrid biosensor system was also used for long-term monitoring of a lab-scale biogas reactor (0.01 m³) for a period of 2 months. In combination with typically monitored parameters, such as gas quality, pH and FOS/TAC (volatile organic acids/total anorganic carbonate), the amperometric measurements of OA and VFA concentration could enhance the understanding of ongoing fermentation processes.},
  language  = {en}
}
@article{RodriguesMoraisNordietal.2018,
  author    = {Rodrigues, Raul T. and Morais, Paulo V. and Nordi, Cristina S. F. and Sch{\"o}ning, Michael Josef and Siqueira Jr., Jos{\´e} R. and Caseli, Luciano},
  title     = {Carbon Nanotubes and Algal Polysaccharides To Enhance the Enzymatic Properties of Urease in Lipid Langmuir-Blodgett Films},
  series = {Langmuir},
  volume    = {34},
  journal   = {Langmuir},
  number    = {9},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5827},
  doi       = {10.1021/acs.langmuir.7b04317},
  pages     = {3082 -- 3093},
  year      = {2018},
  abstract  = {Algal polysaccharides (extracellular polysaccharides) and carbon nanotubes (CNTs) were adsorbed on dioctadecyldimethylammonium bromide Langmuir monolayers to serve as a matrix for the incorporation of urease. The physicochemical properties of the supramolecular system as a monolayer at the air-water interface were investigated by surface pressure-area isotherms, surface potential-area isotherms, interfacial shear rheology, vibrational spectroscopy, and Brewster angle microscopy. The floating monolayers were transferred to hydrophilic solid supports, quartz, mica, or capacitive electrolyte-insulator-semiconductor (EIS) devices, through the Langmuir-Blodgett (LB) technique, forming mixed films, which were investigated by quartz crystal microbalance, fluorescence spectroscopy, and field emission gun scanning electron microscopy. The enzyme activity was studied with UV-vis spectroscopy, and the feasibility of the thin film as a urea sensor was essayed in an EIS sensor device. The presence of CNT in the enzyme-lipid LB film not only tuned the catalytic activity of urease but also helped to conserve its enzyme activity. Viability as a urease sensor was demonstrated with capacitance-voltage and constant capacitance measurements, exhibiting regular and distinctive output signals over all concentrations used in this work. These results are related to the synergism between the compounds on the active layer, leading to a surface morphology that allowed fast analyte diffusion owing to an adequate molecular accommodation, which also preserved the urease activity. This work demonstrates the feasibility of employing LB films composed of lipids, CNT, algal polysaccharides, and enzymes as EIS devices for biosensing applications.},
  language  = {en}
}
@article{AlbannaKotliarLuekeetal.2018,
  author    = {Albanna, Walid and Kotliar, Konstantin and L{\"u}ke, Jan Niklas and Alpdogan, Serdar and Conzen, Catharina and Lindauer, Ute and Clusmann, Hans and Hescheler, J{\"u}rgen and Vilser, Walthard and Schneider, Toni and Schubert, Gerrit Alexander},
  title     = {Non-invasive evaluation of neurovascular coupling in the murine retina by dynamic retinal vessel analysis},
  series = {Plos one},
  volume    = {13},
  journal   = {Plos one},
  number    = {10},
  publisher = {PLOS},
  address   = {San Francisco},
  doi       = {10.1371/journal.pone.0204689},
  pages     = {e0204689},
  year      = {2018},
  abstract  = {Background Impairment of neurovascular coupling (NVC) was recently reported in the context of subarachnoid hemorrhage and may correlate with disease severity and outcome. However, previous techniques to evaluate NVC required invasive procedures. Retinal vessels may represent an alternative option for non-invasive assessment of NVC. Methods A prototype of an adapted retinal vessel analyzer was used to assess retinal vessel diameter in mice. Dynamic vessel analysis (DVA) included an application of monochromatic flicker light impulses in predefined frequencies for evaluating NVC. All retinae were harvested after DVA and electroretinograms were performed. Results A total of 104 retinal scans were conducted in 21 male mice (90 scans). Quantitative arterial recordings were feasible only in a minority of animals, showing an emphasized reaction to flicker light impulses (8 mice; 14 scans). A characteristic venous response to flicker light, however, could observed in the majority of animals. Repeated measurements resulted in a significant decrease of baseline venous diameter (7 mice; 7 scans, p < 0.05). Ex-vivo electroretinograms, performed after in-vivo DVA, demonstrated a significant reduction of transretinal signaling in animals with repeated DVA (n = 6, p < 0.001). Conclusions To the best of our knowledge, this is the first non-invasive study assessing murine retinal vessel response to flicker light with characteristic changes in NVC. The imaging system can be used for basic research and enables the investigation of retinal vessel dimension and function in control mice and genetically modified animals.},
  language  = {en}
}
@article{TekinAshikagaHorikawaetal.2018,
  author    = {Tekin, Nurettin and Ashikaga, Mitsugu and Horikawa, Atsushi and Funke, Harald},
  title     = {Enhancement of fuel flexibility of industrial gas turbines by development of innovative hydrogen combustion systems},
  series = {Gas for energy},
  journal   = {Gas for energy},
  number    = {2},
  publisher = {Vulkan-Verlag},
  address   = {Essen},
  pages     = {4},
  year      = {2018},
  abstract  = {For fuel flexibility enhancement hydrogen represents a possible alternative gas turbine fuel within future low emission power generation, in case of hydrogen production by the use of renewable energy sources such as wind energy or biomass. Kawasaki Heavy Industries, Ltd. (KHI) has research and development projects for future hydrogen society; production of hydrogen gas, refinement and liquefaction for transportation and storage, and utilization with gas turbine / gas engine for the generation of electricity. In the development of hydrogen gas turbines, a key technology is the stable and low NOx hydrogen combustion, especially Dry Low Emission (DLE) or Dry Low NOx (DLN) hydrogen combustion. Due to the large difference in the physical properties of hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for DLE hydrogen combustion. Thus, the development of DLE hydrogen combustion technologies is an essential and challenging task for the future of hydrogen fueled gas turbines. The DLE Micro-Mix combustion principle for hydrogen fuel has been in development for many years to significantly reduce NOx emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized "diffusion-type" flames. The major advantages of this combustion principle are the inherent safety against flashback and the low NOx-emissions due to a very short residence time of the reactants in the flame region of the micro-flames.},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{BalakirskiKotliarPaulyetal.2018,
  author    = {Balakirski, Galina and Kotliar, Konstantin and Pauly, Karolin J. and Krings, Laura K. and R{\"u}bben, Albert and Baron, Jens M. and Schmitt, Laurenz},
  title     = {Surgical Site Infections After Dermatologic Surgery in Immunocompromised Patients: A Single-Center Experience},
  series = {Dermatologic Surgery},
  journal   = {Dermatologic Surgery},
  number    = {44 (12)},
  publisher = {Wolters Kluwer},
  doi       = {10.1097/DSS.0000000000001615},
  pages     = {1525 -- 1536},
  year      = {2018},
  abstract  = {BACKGROUND Immunosuppression is often considered as an indication for antibiotic prophylaxis to prevent surgical site infections (SSI) while performing skin surgery. However, the data on the risk of developing SSI after dermatologic surgery in immunosuppressed patients are limited. PATIENTS AND METHODS All patients of the Department of Dermatology and Allergology at the University Hospital of RWTH Aachen in Aachen, Germany, who underwent hospitalization for a dermatologic surgery between June 2016 and January 2017 (6 months), were followed up after surgery until completion of the wound healing process. The follow-up addressed the occurrence of SSI and the need for systemic antibiotics after the operative procedure. Immunocompromised patients were compared with immunocompetent patients. The investigation was conducted as a retrospective analysis of patient records. RESULTS The authors performed 284 dermatologic surgeries in 177 patients. Nineteen percent (54/284) of the skin surgery was performed on immunocompromised patients. The most common indications for surgical treatment were nonmelanoma skin cancer and malignant melanomas. Surgical site infections occurred in 6.7\% (19/284) of the cases. In 95\% (18/19), systemic antibiotic treatment was needed. Twenty-one percent of all SSI (4/19) were seen in immunosuppressed patients. CONCLUSION According to the authors' data, immunosuppression does not represent a significant risk factor for SSI after dermatologic surgery. However, larger prospective studies are needed to make specific recommendations on the use of antibiotic prophylaxis while performing skin surgery in these patients. The available data on complications after dermatologic surgery have improved over the past years. Particularly, additional risk factors have been identified for surgical site infections (SSI). Purulent surgical sites, older age, involvement of head, neck, and acral regions, and also the involvement of less experienced surgeons have been reported to increase the risk of the SSI after dermatologic surgeries.1 In general, the incidence of SSI after skin surgery is considered to be low.1,2 However, antibiotics in dermatologic surgeries, especially in the perioperative setting, seem to be overused,3,4 particularly regarding developing antibiotic resistances and side effects. Immunosuppression has been recommended to be taken into consideration as an additional indication for antibiotic prophylaxis to prevent SSI after skin surgery in special cases.5,6 However, these recommendations do not specify the exact dermatologic surgeries, and were not specifically developed for dermatologic surgery patients and treatments, but adopted from other surgical fields.6 According to the survey conducted on American College of Mohs Surgery members in 2012, 13\% to 29\% of the surgeons administered antibiotic prophylaxis to immunocompromised patients to prevent SSI while performing dermatologic surgery on noninfected skin,3 although this was not recommended by Journal of the American Academy of Dermatology Advisory Statement. Indeed, the data on the risk of developing SSI after dermatologic surgery in immunosuppressed patients are limited. However, it is possible that due to the insufficient evidence on the risk of SSI occurrence in this patient group, dermatologic surgeons tend to overuse perioperative antibiotic prophylaxis. To make specific recommendations on the use of antibiotic prophylaxis in immunosuppressed patients in the field of skin surgery, more information about the incidence of SSI after dermatologic surgery in these patients is needed. The aim of this study was to fill this data gap by investigating whether there is an increased risk of SSI after skin surgery in immunocompromised patients compared with immunocompetent patients.},
  language  = {en}
}
@article{RittwegerAlbrachtFluecketal.2018,
  author    = {Rittweger, J{\"o}rn and Albracht, Kirsten and Fl{\"u}ck, Martin and Ruoss, Severin and Brocca, Lorenza and Longa, Emanuela and Moriggi, Manuela and Seynnes, Olivier and Di Giulio, Irene and Tenori, Leonardo and Vignoli, Alessia and Capri, Miriam and Gelfi, Cecilia and Luchinat, Claudio and Franceschi, Claudio and Bottinelli, Roberto and Cerretelli, Paolo and Narici, Marco},
  title     = {Sarcolab pilot study into skeletal muscle's adaptation to longterm spaceflight},
  series = {npj Microgravity},
  volume    = {4},
  journal   = {npj Microgravity},
  number    = {1},
  publisher = {Nature Portfolio},
  issn      = {2373-8065},
  doi       = {10.1038/s41526-018-0052-1},
  pages     = {1 -- 9},
  year      = {2018},
  language  = {en}
}
@inproceedings{UlmerBraunLaietal.2019,
  author    = {Ulmer, Jessica and Braun, Sebastian and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg},
  title     = {Generic integration of VR and AR in product lifecycles based on CAD models},
  series = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  year      = {2019},
  language  = {en}
}
@article{WerkhausenCroninAlbrachtetal.2019,
  author    = {Werkhausen, Amelie and Cronin, Neil J. and Albracht, Kirsten and Bojsen-M{\o}ller, Jens and Seynnes, Olivier R.},
  title     = {Distinct muscle-tendon interaction during running at different speeds and in different loading conditions},
  series = {Journal of Applied Physiology},
  volume    = {127},
  journal   = {Journal of Applied Physiology},
  number    = {1},
  issn      = {1522-1601},
  doi       = {10.1152/japplphysiol.00710.2018},
  pages     = {246 -- 253},
  year      = {2019},
  language  = {en}
}
@inproceedings{CordesGligorevicBlicharski2019,
  author    = {Cordes, Sven and Gligorevic, Snjezana and Blicharski, Peter},
  title     = {Analysis of sine precision influence on DOA estimation using the MUSIC algorithm},
  series = {2019 20th International Radar Symposium (IRS)},
  booktitle = {2019 20th International Radar Symposium (IRS)},
  isbn      = {978-3-7369-9860-5},
  doi       = {10.23919/IRS.2019.8768162},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@article{JildehKirchnerBaltesetal.2019,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Baltes, Klaus and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of an in-line evaporation unit for the production of gas mixtures containing hydrogen peroxide - numerical modeling and experimental results},
  series = {International Journal of Heat and Mass Transfer},
  volume    = {143},
  journal   = {International Journal of Heat and Mass Transfer},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0017-9310},
  doi       = {10.1016/j.ijheatmasstransfer.2019.118519},
  pages     = {Article number 118519},
  year      = {2019},
  abstract  = {Hydrogen peroxide (H2O2) is a typical surface sterilization agent for packaging materials used in the pharmaceutical, food and beverage industries. We use the finite-elements method to analyze the conceptual design of an in-line thermal evaporation unit to produce a heated gas mixture of air and evaporated H2O2 solution. For the numerical model, the required phase-transition variables of pure H2O2 solution and of the aerosol mixture are acquired from vapor-liquid equilibrium (VLE) diagrams derived from vapor-pressure formulations. This work combines homogeneous single-phase turbulent flow with heat-transfer physics to describe the operation of the evaporation unit. We introduce the apparent heat-capacity concept to approximate the non-isothermal phase-transition process of the H2O2-containing aerosol. Empirical and analytical functions are defined to represent the temperature- and pressure-dependent material properties of the aqueous H2O2 solution, the aerosol and the gas mixture. To validate the numerical model, the simulation results are compared to experimental data on the heating power required to produce the gas mixture. This shows good agreement with the deviations below 10\%. Experimental observations on the formation of deposits due to the evaporation of stabilized H2O2 solution fits the prediction made from simulation results.},
  language  = {en}
}
@inproceedings{EngemannBadriWenningetal.2019,
  author    = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan},
  title     = {Implementation of an Autonomous Tool Trolley in a Production Line},
  series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-19648-6},
  doi       = {10.1007/978-3-030-19648-6_14},
  pages     = {117 -- 125},
  year      = {2019},
  language  = {en}
}
@article{SchwarzGebhardtSchleseretal.2019,
  author    = {Schwarz, Alexander and Gebhardt, Andreas and Schleser, Markus and Popoola, Patricia},
  title     = {New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L},
  series = {Materials Performance and Characterization 8},
  journal   = {Materials Performance and Characterization 8},
  number    = {in press},
  issn      = {2379-1365},
  doi       = {10.1520/MPC20180096},
  year      = {2019},
  language  = {en}
}
@article{BucurLazarescuPopetal.2019,
  author    = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas},
  title     = {Tribological performance of biodegradable lubricants under different surface roughness of tools},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {1},
  issn      = {1583-7904},
  pages     = {172 -- 178},
  year      = {2019},
  language  = {en}
}
@article{ThomaRavi2019,
  author    = {Thoma, Andreas and Ravi, Sridhar},
  title     = {Significance of parallel computing on the performance of Digital Image Correlation algorithms in MATLAB},
  pages     = {1 -- 17},
  year      = {2019},
  abstract  = {Digital Image Correlation (DIC) is a powerful tool used to evaluate displacements and deformations in a non-intrusive manner. By comparing two images, one of the undeformed reference state of a specimen and another of the deformed target state, the relative displacement between those two states is determined. DIC is well known and often used for post-processing analysis of in-plane displacements and deformation of specimen. Increasing the analysis speed to enable real-time DIC analysis will be beneficial and extend the field of use of this technique. Here we tested several combinations of the most common DIC methods in combination with different parallelization approaches in MATLAB and evaluated their performance to determine whether real-time analysis is possible with these methods. To reflect improvements in computing technology different hardware settings were also analysed. We found that implementation problems can reduce the efficiency of a theoretically superior algorithm such that it becomes practically slower than a suboptimal algorithm. The Newton-Raphson algorithm in combination with a modified Particle Swarm algorithm in parallel image computation was found to be most effective. This is contrary to theory, suggesting that the inverse-compositional Gauss-Newton algorithm is superior. As expected, the Brute Force Search algorithm is the least effective method. We also found that the correct choice of parallelization tasks is crucial to achieve improvements in computing speed. A poorly chosen parallelisation approach with high parallel overhead leads to inferior performance. Finally, irrespective of the computing mode the correct choice of combinations of integerpixel and sub-pixel search algorithms is decisive for an efficient analysis. Using currently available hardware realtime analysis at high framerates remains an aspiration.},
  language  = {en}
}
@article{BartellaKamalScholletal.2019,
  author    = {Bartella, Alexander K. and Kamal, Mohammad and Scholl, Ingrid and Schiffer, Stefan and Steegmann, Julius and Ketelsen, Dominik and H{\"o}lzle, Frank W. and Lethaus, Bernd},
  title     = {Virtual reality in preoperative imaging in maxillofacial surgery: implementation of "the next level"?},
  series = {British Journal of Oral and Maxillofacial Surgery},
  volume    = {57},
  journal   = {British Journal of Oral and Maxillofacial Surgery},
  number    = {7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0266-4356},
  doi       = {10.1016/j.bjoms.2019.02.014},
  pages     = {644 -- 648},
  year      = {2019},
  language  = {en}
}
@article{MatchaLjubasGueldemet2018,
  author    = {Matcha, Heike and Ljubas, Ante and Gueldemet, Harun},
  title     = {Printing a Coffee Bar: An investigation into mid-scale 3D printing},
  series = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  journal   = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  editor    = {Kepczynska-Walczak, A.},
  pages     = {59 -- 68},
  year      = {2018},
  abstract  = {We present and discuss an exploration of the possibilities and properties of 3D printing with a printing space of 1 cubic meter, and how those can be integrated into architectural education through an experimental design and research course with students of architecture.We expand on issues presented at the eCAADe conference 2017 in Rome [Ref 6] by increasing the complexity and size of our prints, printing not a model to scale, but a full scale funtional prototype of a usable architectural object: A coffee bar.},
  language  = {en}
}
@inproceedings{HoevelerJanser2016,
  author    = {Hoeveler, Bastian and Janser, Frank},
  title     = {The aerodynamically optimized design of a fan-in-wing duct},
  series = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016},
  booktitle = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016},
  isbn      = {1-85768-371-4},
  pages     = {1 -- 10},
  year      = {2016},
  language  = {en}
}
@article{CapriMorsianiSantoroetal.2019,
  author    = {Capri, Miriam and Morsiani, Cristina and Santoro, Aurelia and Moriggi, Manuela and Conte, Maria and Martucci, Morena and Bellavista, Elena and Fabbri, Cristina and Giampieri, Enrico and Albracht, Kirsten and Fl{\"u}ck, Martin and Ruoss, Severin and Brocca, Lorenza and Canepari, Monica and Longa, Emanuela and Giulio, Irene Di and Bottinelli, Roberto and Cerretelli, Paolo and Salvioli, Stefano and Gelfi, Cecilia and Franceschi, Claudio and Narici, Marco and Rittweger, J{\"o}rn},
  title     = {Recovery from 6-month spaceflight at the International Space Station: muscle-related stress into a proinflammatory setting},
  series = {The FASEB journal : official publication of the Federation of American Societies for Experimental Biology},
  volume    = {33},
  journal   = {The FASEB journal : official publication of the Federation of American Societies for Experimental Biology},
  number    = {4},
  doi       = {10.1096/fj.201801625R},
  pages     = {5168 -- 5180},
  year      = {2019},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@article{QuittmannAbelAlbrachtetal.2019,
  author    = {Quittmann, Oliver J. and Abel, Thomas and Albracht, Kirsten and Str{\"u}der, Heiko K.},
  title     = {Reliability of muscular activation patterns and their alterations during incremental handcycling in able-bodied participants},
  series = {Sports Biomechanics},
  journal   = {Sports Biomechanics},
  number    = {Article in press},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1752-6116},
  doi       = {10.1080/14763141.2019.1593496},
  year      = {2019},
  language  = {en}
}
@article{SchmidtForkmannSchultzetal.2019,
  author    = {Schmidt, Katharina and Forkmann, Katarina and Schultz, Heidrun and Gratz, Marcel and Bitz, Andreas and Wiech, Katja and Bingel, Ulrike},
  title     = {Enhanced Neural Reinstatement for Evoked Facial Pain Compared With Evoked Hand Pain},
  series = {The Journal of Pain},
  journal   = {The Journal of Pain},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1526-5900},
  doi       = {10.1016/j.jpain.2019.03.003},
  year      = {2019},
  language  = {en}
}
@inproceedings{BosseDeClercqBarnat2018,
  author    = {Bosse, Elke and De Clercq, Mikael and Barnat, Miriam},
  title     = {The Role of Diversity for the Transition to Higher Education},
  series = {EARLI SIG 4, Giessen},
  booktitle = {EARLI SIG 4, Giessen},
  pages     = {13 Folien},
  year      = {2018},
  language  = {en}
}
@inproceedings{HoffmannNierenGaebetal.2019,
  author    = {Hoffmann, Katharina and Nieren, Monika and G{\"a}b, Martina and Kasper, Anna and Elbers, Gereon},
  title     = {The potential of near infrared spectroscopy (NIRS) for the environmental biomonitoring of plants},
  series = {International conference on Life Sciences and Technology},
  volume    = {276},
  booktitle = {International conference on Life Sciences and Technology},
  number    = {012009},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/276/1/012009},
  pages     = {1 -- 3},
  year      = {2019},
  abstract  = {In the current environmental condition, the increase in pollution of the air, water, and soil indirectly will induce plants stress and decrease vegetation growth rate. These issues pay more attention to be solved by scientists worldwide. The higher level of chemical pollutants also induced the gradual changes in plants metabolism and decreased enzymatic activity. Importantly, environmental biomonitoring may play a pivotal contribution to prevent biodiversity degradation and plants stress due to pollutant exposure. Several previous studies have been done to monitor the effect of environmental changes on plants growth. Among that, Near Infrared spectroscopy (NIRS) offers an alternative way to observe the significant alteration of plant physiology caused by environmental damage related to pollution. Impairment of photosynthesis, nutrient and oxidative imbalances, and mutagenesis.},
  language  = {en}
}
@article{SchiffelsSelmer2019,
  author    = {Schiffels, Johannes and Selmer, Thorsten},
  title     = {Combinatorial assembly of ferredoxin-linked modules in Escherichia coli yields a testing platform for Rnf-complexes},
  series = {Biotechnology and Bioengineering},
  journal   = {Biotechnology and Bioengineering},
  number    = {accepted article},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/bit.27079},
  pages     = {1 -- 36},
  year      = {2019},
  language  = {en}
}
@article{KoppSchmeetsGosauetal.2019,
  author    = {Kopp, Alexander and Schmeets, Ralf and Gosau, Martin and Friedrich, Reinhard E. and Fuest, Sandra and Behbahani, Mehdi and Barbeck, Mike and Rutkowski, Rico and Burg, Simon and Kluwe, Lan and Henningsen, Anders},
  title     = {Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application},
  series = {In Vivo},
  volume    = {33},
  journal   = {In Vivo},
  number    = {3},
  issn      = {1791-7549},
  doi       = {10.21873/invivo.11536},
  pages     = {757 -- 762},
  year      = {2019},
  language  = {en}
}
@inproceedings{SiebigterothKraftSchmidtsetal.2019,
  author    = {Siebigteroth, Ines and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {A Study on Improving Corpus Creation by Pair Annotation},
  series = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  booktitle = {Proceedings of the Poster Session of the 2nd Conference on Language, Data and Knowledge (LDK-PS 2019)},
  issn      = {1613-0073},
  pages     = {40 -- 44},
  year      = {2019},
  language  = {en}
}
@article{KodomskoiKotliarSchroederetal.2019,
  author    = {Kodomskoi, Leonid and Kotliar, Konstantin and Schr{\"o}der, Andreas and Weiss, Michael and Hille, Konrad},
  title     = {Suture-Probe Canaloplasty as an Alternative to Canaloplasty using the iTrack™ Microcatheter},
  series = {Journal of Glaucoma},
  journal   = {Journal of Glaucoma},
  number    = {Epub ahead of print},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  issn      = {1057-0829},
  doi       = {10.1097/IJG.0000000000001321},
  year      = {2019},
  language  = {en}
}
@article{GerhardsSanderZivkovicetal.2020,
  author    = {Gerhards, Michael and Sander, Volker and Zivkovic, Miroslav and Belloum, Adam and Bubak, Marian},
  title     = {New approach to allocation planning of many-task workflows on clouds},
  series = {Concurrency and Computation: Practice and Experience},
  volume    = {32},
  journal   = {Concurrency and Computation: Practice and Experience},
  number    = {2 Article e5404},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {1532-0634},
  doi       = {10.1002/cpe.5404},
  pages     = {1 -- 16},
  year      = {2020},
  abstract  = {Experience has shown that a priori created static resource allocation plans are vulnerable to runtime deviations and hence often become uneconomic or highly exceed a predefined soft deadline. The assumption of constant task execution times during allocation planning is even more unlikely in a cloud environment where virtualized resources vary in performance. Revising the initially created resource allocation plan at runtime allows the scheduler to react on deviations between planning and execution. Such an adaptive rescheduling of a many-task application workflow is only feasible, when the planning time can be handled efficiently at runtime. In this paper, we present the static low-complexity resource allocation planning algorithm (LCP) applicable to efficiently schedule many-task scientific application workflows on cloud resources of different capabilities. The benefits of the presented algorithm are benchmarked against alternative approaches. The benchmark results show that LCP is not only able to compete against higher complexity algorithms in terms of planned costs and planned makespan but also outperforms them significantly by magnitudes of 2 to 160 in terms of required planning time. Hence, LCP is superior in terms of practical usability where low planning time is essential such as in our targeted online rescheduling scenario.},
  language  = {en}
}
@article{NoureddineKraffLaddetal.2019,
  author    = {Noureddine, Yacine and Kraff, Oliver and Ladd, Mark E. and Wrede, Karsten and Chen, Bixia and Quick, Harald H. and Schaefers, Georg and Bitz, Andreas},
  title     = {Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips},
  series = {Magnetic Resonance in Medicine},
  journal   = {Magnetic Resonance in Medicine},
  number    = {Early view},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.27835},
  pages     = {1 -- 17},
  year      = {2019},
  language  = {en}
}
@article{DantismRoehlenSelmeretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Selmer, Thorsten and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Quantitative differential monitoring of the metabolic activity of Corynebacterium glutamicum cultures utilizing a light-addressable potentiometric sensor system},
  series = {Biosensors and Bioelectronics},
  volume    = {139},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.bios.2019.111332},
  pages     = {Artikel 111332},
  year      = {2019},
  language  = {en}
}
@phdthesis{Geenen2013,
  author    = {Geenen, Eva-Maria},
  title     = {Studies of Epstein-Barr virus EBNA2 and its interactions with host cell factors},
  publisher = {Universit{\´e} de Grenoble},
  address   = {Grenoble},
  pages     = {125 S.},
  year      = {2013},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{BragardSubeSchneideretal.2019,
  author    = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph},
  title     = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744132},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{MoretAlkemadeUpcraftetal.2020,
  author    = {Moret, J.L.T.M. and Alkemade, J. and Upcraft, T.M. and Paulßen, Elisabeth and Wolterbeek, H.T. and Ommen, J.R. van and Denkova, A.G.},
  title     = {The application of atomic layer deposition in the production of sorbents for ⁹⁹Mo/⁹⁹ᵐTc generator},
  series = {Applied Radiation and Isotopes},
  volume    = {164},
  journal   = {Applied Radiation and Isotopes},
  number    = {109266},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2020.109266},
  pages     = {9},
  year      = {2020},
  abstract  = {New production routes for ⁹⁹Mo are steadily gaining importance. However, the obtained specific activity is much lower than currently produced by the fission of U-235. To be able to supply hospitals with ⁹⁹Mo/⁹⁹ᵐTc generators with the desired activity, the adsorption capacity of the column material should be increased. In this paper we have investigated whether the gas phase coating technique Atomic Layer Deposition (ALD), which can deposit ultra-thin layers on high surface area materials, can be used to attain materials with high adsorption capacity for ⁹⁹Mo. For this purpose, ALD was applied on a silica-core sorbent material to coat it with a thin layer of alumina. This sorbent material shows to have a maximum adsorption capacity of 120 mg/g and has a ⁹⁹ᵐTc elution efficiency of 55 ± 2\% based on 3 executive elutions.},
  language  = {en}
}
@article{WeberEnglhardArentetal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Arent, Jan-Christoph and Hausmann, Joachim},
  title     = {An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates},
  series = {Journal of Composite Materials},
  volume    = {53},
  journal   = {Journal of Composite Materials},
  number    = {26-27},
  issn      = {1530-793X},
  doi       = {10.1177/0021998319846556},
  pages     = {3757 -- 3773},
  year      = {2019},
  language  = {en}
}
@article{OttenWeberArent2018,
  author    = {Otten, Dennis and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation - On Its Way to Industrial Application},
  series = {International Journal of Aviation, Aeronautics, and Aerospace},
  volume    = {5},
  journal   = {International Journal of Aviation, Aeronautics, and Aerospace},
  number    = {2},
  publisher = {Embry-Riddle Aeronautical University},
  address   = {Daytona Beach, Fla.},
  issn      = {2374-6793},
  doi       = {10.15394/ijaaa.2018.1217},
  year      = {2018},
  abstract  = {Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale.},
  language  = {en}
}
@article{WeberRuffStahl2017,
  author    = {Weber, Tobias and Ruff-Stahl, Hans-Joachim K.},
  title     = {Advances in Composite Manufacturing of Helicopter Parts},
  series = {International Journal of Aviation, Aeronautics, and Aerospace},
  volume    = {4},
  journal   = {International Journal of Aviation, Aeronautics, and Aerospace},
  number    = {1},
  issn      = {2374-6793},
  doi       = {10.15394/ijaaa.2017.1153},
  year      = {2017},
  language  = {en}
}
@article{WeberArentSteffenetal.2017,
  author    = {Weber, Tobias and Arent, Jan-Christoph and Steffen, Lucas and Balvers, Johannes M. and Duhovic, Miro},
  title     = {Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation},
  series = {Journal of Composite Materials},
  volume    = {51},
  journal   = {Journal of Composite Materials},
  number    = {12},
  publisher = {Sage},
  address   = {London},
  issn      = {1530-793X},
  doi       = {10.1177/0021998317699868},
  pages     = {1753 -- 1767},
  year      = {2017},
  language  = {en}
}
@inproceedings{OttenSchmidtWeber2016,
  author    = {Otten, D. and Schmidt, M. and Weber, Tobias},
  title     = {Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations},
  series = {SAMPE Europe Conference 16 Liege},
  booktitle = {SAMPE Europe Conference 16 Liege},
  isbn      = {978-1-5108-3800-0},
  pages     = {570 -- 577},
  year      = {2016},
  language  = {en}
}
@inproceedings{WeberTellisDuhovic2016,
  author    = {Weber, Tobias and Tellis, Jane J. and Duhovic, Miro},
  title     = {Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation},
  series = {ECCM 17, 17th European Conference on Composite Materials, M{\"u}nchen, DE, Jun 26-30, 2016},
  booktitle = {ECCM 17, 17th European Conference on Composite Materials, M{\"u}nchen, DE, Jun 26-30, 2016},
  isbn      = {978-3-00-053387-7},
  pages     = {1 -- 7},
  year      = {2016},
  language  = {en}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes M.},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@inproceedings{HailerWeberArent2019,
  author    = {Hailer, Benjamin and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for Autoclave-Produced Sandwich Structures},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{WeberEnglhardHaileretal.2019,
  author    = {Weber, Tobias and Englhard, Markus and Hailer, Benjamin and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling},
  series = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2019, Nantes, France},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}
@inproceedings{WeberEnglhardHaileretal.2015,
  author    = {Weber, Tobias and Englhard, Markus and Hailer, Benjamin and Arent, Jan-Christoph},
  title     = {Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling},
  series = {Proceedings of SAMPE Europe Conference, Amiens , France},
  booktitle = {Proceedings of SAMPE Europe Conference, Amiens , France},
  pages     = {1 -- 10},
  year      = {2015},
  language  = {en}
}
@inproceedings{Weber2015,
  author    = {Weber, Tobias},
  title     = {Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts},
  series = {Proceedings of SAMPE Europe Conference 2015, Amiens, France},
  booktitle = {Proceedings of SAMPE Europe Conference 2015, Amiens, France},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@inproceedings{OttenSchmidWeber2015,
  author    = {Otten, D. and Schmid, M. and Weber, Tobias},
  title     = {Advances In Sheet Metal-Forming: Reduction Of Tooling Cost By Methodical Optimization},
  series = {Proceedings of SAMPE Europe Conference, Amiens , France},
  booktitle = {Proceedings of SAMPE Europe Conference, Amiens , France},
  year      = {2015},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2020,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of low-quality product data by attribute label ranking},
  series = {Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1},
  booktitle = {Proceedings of the 9th International Conference on Data Science, Technology and Applications DATA - Volume 1},
  publisher = {SciTePress},
  address   = {Set{\´u}bal, Portugal},
  isbn      = {978-989-758-440-4},
  doi       = {10.5220/0009831000900101},
  pages     = {90 -- 101},
  year      = {2020},
  abstract  = {The integration of product data from heterogeneous sources and manufacturers into a single catalog is often still a laborious, manual task. Especially small- and medium-sized enterprises face the challenge of timely integrating the data their business relies on to have an up-to-date product catalog, due to format specifications, low quality of data and the requirement of expert knowledge. Additionally, modern approaches to simplify catalog integration demand experience in machine learning, word vectorization, or semantic similarity that such enterprises do not have. Furthermore, most approaches struggle with low-quality data. We propose Attribute Label Ranking (ALR), an easy to understand and simple to adapt learning approach. ALR leverages a model trained on real-world integration data to identify the best possible schema mapping of previously unknown, proprietary, tabular format into a standardized catalog schema. Our approach predicts multiple labels for every attribute of an inpu t column. The whole column is taken into consideration to rank among these labels. We evaluate ALR regarding the correctness of predictions and compare the results on real-world data to state-of-the-art approaches. Additionally, we report findings during experiments and limitations of our approach.},
  language  = {en}
}
@article{FrankoDuKallweitetal.2020,
  author    = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko},
  title     = {Design of a Multi-Robot System for Wind Turbine Maintenance},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {10},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13102552},
  pages     = {Article 2552},
  year      = {2020},
  abstract  = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.},
  language  = {en}
}
@article{KellerRathBruckmannetal.2020,
  author    = {Keller, Johannes and Rath, Volker and Bruckmann, Johanna and Mottaghy, Darius and Clauser, Christoph and Wolf, Andreas and Seidler, Ralf and B{\"u}cker, H. Martin and Klitzsch, Norbert},
  title     = {SHEMAT-Suite: An open-source code for simulating flow, heat and species transport in porous media},
  series = {SoftwareX},
  volume    = {12},
  journal   = {SoftwareX},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-7110},
  doi       = {10.1016/j.softx.2020.100533},
  pages     = {9},
  year      = {2020},
  abstract  = {SHEMAT-Suite is a finite-difference open-source code for simulating coupled flow, heat and species transport in porous media. The code, written in Fortran-95, originates from geoscientific research in the fields of geothermics and hydrogeology. It comprises: (1) a versatile handling of input and output, (2) a modular framework for subsurface parameter modeling, (3) a multi-level OpenMP parallelization, (4) parameter estimation and data assimilation by stochastic approaches (Monte Carlo, Ensemble Kalman filter) and by deterministic Bayesian approaches based on automatic differentiation for calculating exact (truncation error-free) derivatives of the forward code.},
  language  = {en}
}