@article{BayonValeroGarciaBartualetal.2016,
  author    = {Bayon, Arnau and Valero, Daniel and Garcia-Bartual, Rafael and Vall{\´e}s-Mor{\´a}n, Francisco Jos{\´e} and L{\´o}pez-Jim{\´e}nez, P. Amparo},
  title     = {Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump},
  series = {Environmental Modelling \& Software},
  volume    = {80},
  journal   = {Environmental Modelling \& Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1364-8152},
  doi       = {10.1016/j.envsoft.2016.02.018},
  pages     = {322 -- 335},
  year      = {2016},
  abstract  = {A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the air-water interface, consequently aeration is modeled using an Eulerian-Eulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers.},
  language  = {en}
}
@article{Biener1985,
  author    = {Biener, Ernst},
  title     = {Rehabilitation of old gravity dams},
  series = {[Transactions] : proceedings of fifteenth international congress on large dams ; 24 - 28 Juin 1985, Lausanne, Suisse = Quinzieme Congres International des Grands Barrages. - Bd. 4},
  journal   = {[Transactions] : proceedings of fifteenth international congress on large dams ; 24 - 28 Juin 1985, Lausanne, Suisse = Quinzieme Congres International des Grands Barrages. - Bd. 4},
  publisher = {Intern. Commission on Large Dams},
  address   = {Paris},
  pages     = {Q 59, R.2, S. 21 -- 23},
  year      = {1985},
  language  = {en}
}
@article{BienerBethkeSasseetal.2003,
  author    = {Biener, Ernst and Bethke, H. and Sasse, T. and Wernhoff, T.},
  title     = {Alternative landfill capping using locally available recycled material},
  series = {Land contamination \& reclamation. 14 (2003), H. 4},
  journal   = {Land contamination \& reclamation. 14 (2003), H. 4},
  isbn      = {0967-0513},
  pages     = {419 -- 427},
  year      = {2003},
  language  = {en}
}
@article{BienerBoykenSasse1997,
  author    = {Biener, Ernst and Boyken, P. and Sasse, T.},
  title     = {Integrated dredged material management system of Bremen-Seehausen},
  series = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  journal   = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {497 -- 502},
  year      = {1997},
  language  = {en}
}
@article{BienerBoykenSasseetal.1999,
  author    = {Biener, Ernst and Boyken, P. and Sasse, T. and Arnold, J.},
  title     = {Geotechnical aspects of the construction of the integrated harbour sludge management system in Bremen-Seehausen / P. Boyken ; E. Biener ; T. Sasse ; J. Arnold},
  series = {Geotechnical engineering for transportation infrastructure : proceedings of the twelfth European Conference on Soil Mechanics and Geotechnical Engineering, Amsterdam, Netherlands, 7 - 10 June 1999 ; theory and practice, planning and design, construction and maintenance. - Vol. 2},
  journal   = {Geotechnical engineering for transportation infrastructure : proceedings of the twelfth European Conference on Soil Mechanics and Geotechnical Engineering, Amsterdam, Netherlands, 7 - 10 June 1999 ; theory and practice, planning and design, construction and maintenance. - Vol. 2},
  publisher = {Balkema},
  address   = {Rotterdam},
  isbn      = {90-5809-049-3},
  pages     = {909 -- 914},
  year      = {1999},
  language  = {en}
}
@article{BienerRouve1984,
  author    = {Biener, Ernst and Rouv{\´e}, G.},
  title     = {Behaviour and maintenance of some old masonry gravity dams},
  series = {Safety of dams : proceedings of the International Conference on Safety of Dams, Coimbra, 23-28 April 1984 / ed. by J. Laginha Serafim. - [Hauptbd.]},
  journal   = {Safety of dams : proceedings of the International Conference on Safety of Dams, Coimbra, 23-28 April 1984 / ed. by J. Laginha Serafim. - [Hauptbd.]},
  publisher = {Rotterdam [u.a.]},
  address   = {Balkema},
  isbn      = {90-6191-522-8},
  pages     = {101 -- 106},
  year      = {1984},
  language  = {en}
}
@article{BienerSasse1993,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Construction and rehabilitation of landfill shafts},
  series = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  journal   = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {451 -- 460},
  year      = {1993},
  language  = {en}
}
@article{BienerSasse1993,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Quality improvements in the construction of multilayer covers},
  series = {G{\´e}ologie et confinement des d{\´e}chets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. R{\´e}d. Marcel Arnould},
  journal   = {G{\´e}ologie et confinement des d{\´e}chets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. R{\´e}d. Marcel Arnould},
  publisher = {Balkema},
  address   = {Rotterdam [u.a.]},
  isbn      = {90-5410-330-2},
  pages     = {309 -- 312},
  year      = {1993},
  language  = {en}
}
@article{BienerSasse1994,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Construction of composite lining systems under unfavourable weather conditions},
  series = {Landfilling of waste: barriers / ed. by T. H. Christensen; R. Cossu; R. Stegmann. - 1. Aufl.},
  journal   = {Landfilling of waste: barriers / ed. by T. H. Christensen; R. Cossu; R. Stegmann. - 1. Aufl.},
  publisher = {Spon},
  address   = {London [u.a.]},
  isbn      = {0419159908},
  pages     = {183 -- 200},
  year      = {1994},
  language  = {en}
}
@article{BienerSasse1988,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Experience with new techniques in slurry cutoff wall construction},
  series = {ISWA 88, proceedings of the 5th International Solid Wastes Conference : September 11 - 16th, 1988, Copenhagen, Denmark / ed. by Lizzi Andersen ... - Vol. 1 : Oral presentations},
  journal   = {ISWA 88, proceedings of the 5th International Solid Wastes Conference : September 11 - 16th, 1988, Copenhagen, Denmark / ed. by Lizzi Andersen ... - Vol. 1 : Oral presentations},
  publisher = {Acad. Press},
  address   = {London [u.a.]},
  isbn      = {0-12-058451-4},
  pages     = {41 -- 46},
  year      = {1988},
  language  = {en}
}
@article{BienerSasseArnoldetal.1999,
  author    = {Biener, Ernst and Sasse, T. and Arnold, J. and Woltering, S.},
  title     = {New treatment of harbour sludge in Bremen and Bremerhaven / E. Biener ; T. Sasse ; J. Arnold ; S. Woltering ; N. Binder},
  series = {Characterisation and treatment of sediments : Antwerpen, Belgium, September 15 - 17, 1999 ; [preceded by 12th International Harbour Congress] ; proceedings / CATS 4. Ed.: G. De Schutter. Organized by: Technologisch Instituut, Koninklijke Vlaamse Ingenieursvereniging},
  journal   = {Characterisation and treatment of sediments : Antwerpen, Belgium, September 15 - 17, 1999 ; [preceded by 12th International Harbour Congress] ; proceedings / CATS 4. Ed.: G. De Schutter. Organized by: Technologisch Instituut, Koninklijke Vlaamse Ingenieursvereniging},
  publisher = {Technolog. Inst.},
  address   = {Anvers},
  isbn      = {9076019118},
  pages     = {115 -- 122},
  year      = {1999},
  language  = {en}
}
@article{BienerSasseBoekers1999,
  author    = {Biener, Ernst and Sasse, T. and B{\"o}kers, H.},
  title     = {Preliminary or final capping of sanitary landfills? : Technical and economical aspects},
  series = {Sardinia 99 : proceedings / Seventh International Waste Management and Landfill Symposium, [4 - 8 October 1999, S. Margherita di Pula, Cagliari, Sardinia, Italy]. Ed.: Thomas H. Christensen. - Bd. 3 : Barriers, waste mechanics and landfill design},
  journal   = {Sardinia 99 : proceedings / Seventh International Waste Management and Landfill Symposium, [4 - 8 October 1999, S. Margherita di Pula, Cagliari, Sardinia, Italy]. Ed.: Thomas H. Christensen. - Bd. 3 : Barriers, waste mechanics and landfill design},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {287 -- 294},
  year      = {1999},
  language  = {en}
}
@article{BienerSasseKonertz1993,
  author    = {Biener, Ernst and Sasse, T. and Konertz, K.},
  title     = {Preparation of mineral sealing materials for landfills by different processing technologies / Sasse, T. ; Biener, E. ; Konertz, K.},
  series = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  journal   = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {275 -- 283},
  year      = {1993},
  language  = {en}
}
@article{BienerSasseWernhoff2003,
  author    = {Biener, Ernst and Sasse, T. and Wernhoff, T.},
  title     = {Using harbour dredged material for combination sealing of the former Bockhorner Weg disposal site in Bremen, Germany},
  series = {Proceedings of the International Harbour Congress. 13 (2003)},
  journal   = {Proceedings of the International Harbour Congress. 13 (2003)},
  pages     = {101 -- 109},
  year      = {2003},
  language  = {en}
}
@article{BienerWemhoffBethke1995,
  author    = {Biener, Ernst and Wemhoff, T. and Bethke, H.},
  title     = {Stability and settlement problems based on the example of the Blockland landfill in Bremen},
  series = {Sardinia 95 : Fifth International Landfill Symposium ; (2 - 6 October 1995, S. Margheritadi Pula - Cagliari, Sardinia, Italy) ; proceedings / coord.: Thomas H. Christensen ... - Bd. 2 : Siting, lining, drainage \& landfill mechanics},
  journal   = {Sardinia 95 : Fifth International Landfill Symposium ; (2 - 6 October 1995, S. Margheritadi Pula - Cagliari, Sardinia, Italy) ; proceedings / coord.: Thomas H. Christensen ... - Bd. 2 : Siting, lining, drainage \& landfill mechanics},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {843 -- 853},
  year      = {1995},
  language  = {en}
}
@article{Bung2013,
  author    = {Bung, Daniel B.},
  title     = {Non-intrusive detection of air-water surface roughness in self-aerated chute flows},
  series = {Journal of hydraulic research},
  volume    = {Vol. 51},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 3},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {322 -- 329},
  year      = {2013},
  language  = {en}
}
@article{Bung2011,
  author    = {Bung, Daniel B.},
  title     = {Developing flow in skimming flow regime on embankment stepped spillways},
  series = {Journal of hydraulic research},
  volume    = {Vol. 49},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 5},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {639 -- 648},
  year      = {2011},
  language  = {en}
}
@article{BungCrookstonValero2020,
  author    = {Bung, Daniel B. and Crookston, Brian M. and Valero, Daniel},
  title     = {Turbulent free-surface monitoring with an RGB-D sensor: the hydraulic jump case},
  series = {Journal of Hydraulic Research},
  journal   = {Journal of Hydraulic Research},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079},
  doi       = {10.1080/00221686.2020.1844810},
  year      = {2020},
  language  = {en}
}
@article{BungValero2018,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Re-aeration on stepped spillways with special consideration of entrained and entrapped air},
  series = {Geosciences},
  volume    = {8},
  journal   = {Geosciences},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3263},
  pages     = {Article number 333},
  year      = {2018},
  abstract  = {As with most high-velocity free-surface flows, stepped spillway flows become self-aerated when the drop height exceeds a critical value. Due to the step-induced macro-roughness, the flow field becomes more turbulent than on a similar smooth-invert chute. For this reason, cascades are oftentimes used as re-aeration structures in wastewater treatment. However, for stepped spillways as flood release structures downstream of deoxygenated reservoirs, gas transfer is also of crucial significance to meet ecological requirements. Prediction of mass transfer velocities becomes challenging, as the flow regime differs from typical previously studied flow conditions. In this paper, detailed air-water flow measurements are conducted on stepped spillway models with different geometry, with the aim to estimate the specific air-water interface. Re-aeration performances are determined by applying the absorption method. In contrast to earlier studies, the aerated water body is considered a continuous mixture up to a level where 75\% air concentration is reached. Above this level, a homogenous surface wave field is considered, which is found to significantly affect the total air-water interface available for mass transfer. Geometrical characteristics of these surface waves are obtained from high-speed camera investigations. The results show that both the mean air concentration and the mean flow velocity have influence on the mass transfer. Finally, an empirical relationship for the mass transfer on stepped spillway models is proposed.},
  language  = {en}
}
@article{BungValero2016,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Optical flow estimation in aerated flows},
  series = {Journal of Hydraulic Research},
  volume    = {54},
  journal   = {Journal of Hydraulic Research},
  number    = {5},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/00221686.2016.1173600},
  pages     = {575 -- 580},
  year      = {2016},
  abstract  = {Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn-Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn-Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150.},
  language  = {en}
}
@article{BungErpicumTullis2020,
  author    = {Bung, Daniel Bernhard and Erpicum, S{\´e}bastien and Tullis, Blanke P.},
  title     = {Advances in hydraulic structures engineering},
  series = {Journal of Hydraulic Engineering},
  volume    = {147},
  journal   = {Journal of Hydraulic Engineering},
  number    = {1},
  publisher = {ASCE},
  address   = {Reston, Va.},
  issn      = {0733-9429 (Druckausgabe)},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001851},
  pages     = {1 Seite},
  year      = {2020},
  language  = {en}
}
@article{CheenakulaGriebelMontagetal.2023,
  author    = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus},
  title     = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives},
  series = {Frontiers in Microbiology},
  volume    = {14},
  journal   = {Frontiers in Microbiology},
  number    = {11155235},
  editor    = {Huang, Xiaowu},
  publisher = {Frontiers},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2023.1155235},
  pages     = {1 -- 15},
  year      = {2023},
  abstract  = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.},
  language  = {en}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@article{ErpicumCrookstonBombardellietal.2021,
  author    = {Erpicum, Sebastien and Crookston, Brian M. and Bombardelli, Fabian and Bung, Daniel B. and Felder, Stefan and Mulligan, Sean and Oertel, Mario and Palermo, Michele},
  title     = {Hydraulic structures engineering: An evolving science in a changing world},
  series = {Wires Water},
  volume    = {8},
  journal   = {Wires Water},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2049-1948},
  doi       = {10.1002/wat2.1505},
  year      = {2021},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@article{GosslaSato1998,
  author    = {Gossla, Ulrich and Sato, R.},
  title     = {Present production circumstances of aggregate in Germany / Sato, R.; Gossla, U.},
  series = {Cement \& Concrete (1998)},
  journal   = {Cement \& Concrete (1998)},
  pages     = {146 -- 153},
  year      = {1998},
  language  = {en}
}
@article{Hoettges1990,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; H{\"o}ttges, J{\"o}rg; Rouv{\´e}, Gerhard},
  series = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  journal   = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  publisher = {Delft Hydraulics},
  address   = {Delft},
  year      = {1990},
  language  = {en}
}
@article{Hoettges1992,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation},
  series = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  journal   = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  publisher = {Computational Mechanics Publications [u.a.]},
  address   = {Southampton [u.a.]},
  isbn      = {185312169X},
  year      = {1992},
  language  = {en}
}
@article{Hoettges2017,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {QKan - Management of drainage system data with QGIS},
  series = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  volume    = {17},
  journal   = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  number    = {Article 13},
  pages     = {95 -- 100},
  year      = {2017},
  language  = {en}
}
@article{HoettgesArnoldRouve1994,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Measurement of transverse mixing using digital image acquisition},
  series = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  journal   = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven},
  publisher = {Wiley},
  address   = {Chichester [u.a.]},
  isbn      = {0471941425},
  pages     = {XVI, 458 S., [8] Bl : Ill. (z.T. farb.), graph. Da},
  year      = {1994},
  language  = {en}
}
@article{HoettgesArnoldRouve1989,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / Arnold, U.; J. H{\"o}ttges; G. Rouv{\´e}},
  series = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  journal   = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  publisher = {Universal Acad. Press},
  address   = {Tokyo},
  isbn      = {4-946443-03-7},
  pages     = {569 -- 576},
  year      = {1989},
  language  = {en}
}
@article{HoettgesArnoldRouve1992,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Profiles of Mixing Coefficient in Compound Open Channel},
  series = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  journal   = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  publisher = {Hemisphere Publ. Corp.},
  address   = {Washington, DC [u.a.]},
  isbn      = {1-56032-209-8},
  pages     = {XVII, 773 S. : graph. Darst.},
  year      = {1992},
  language  = {en}
}
@article{HoettgesFeldhausBrockhausetal.1992,
  author    = {H{\"o}ttges, J{\"o}rg and Feldhaus, R. and Brockhaus, T. and Rouv{\´e}, Gerhard},
  title     = {Finite Element Simulation of Flow and Pollution Transport applied to a Part of the River Rhine / Feldhaus, R.; J. H{\"o}ttges, T. Brockhaus; G. Rouv{\´e}},
  series = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer},
  journal   = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer},
  publisher = {Ashgate},
  address   = {Aldershot, Hants, UK [u.a.]},
  year      = {1992},
  language  = {en}
}
@article{HoettgesRitterbachEls1987,
  author    = {H{\"o}ttges, J{\"o}rg and Ritterbach, E. and Els, H.},
  title     = {Optical Improvement of LDV-Measurement in Pipe Flow / Ritterbach, E.; J. H{\"o}ttges; H. Els},
  series = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group},
  journal   = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3540187561},
  pages     = {VII, 601 S : Ill., graph. Darst.},
  year      = {1987},
  language  = {en}
}
@article{Jochim2004,
  author    = {Jochim, Haldor E.},
  title     = {A traffic resistance model of long-distance travel},
  series = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  journal   = {Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3-89301-180-3},
  pages     = {X, 84 S. : graph. Darst. + 1 CD-ROM},
  year      = {2004},
  language  = {en}
}
@article{Jochim2002,
  author    = {Jochim, Haldor E.},
  title     = {Charging rail operators for delays - how not to do it},
  series = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  journal   = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3893010858},
  year      = {2002},
  language  = {en}
}
@article{KerpenBungValeroetal.2017,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {Journal of Ocean University of China},
  volume    = {16},
  journal   = {Journal of Ocean University of China},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1993-5021},
  doi       = {10.1007/s11802-017-3355-z},
  pages     = {649 -- 654},
  year      = {2017},
  language  = {en}
}
@article{KerresGredigkHoffmannJatheetal.2020,
  author    = {Kerres, Karsten and Gredigk-Hoffmann, Sylvia and Jathe, R{\"u}diger and Orlik, Stefan and Sariyildiz, Mustafa and Schmidt, Torsten and Sympher, Klaus-Jochen and Uhlenbroch, Adrian},
  title     = {Future approaches for sewer system condition assessment},
  series = {Water Practice \& Technology},
  journal   = {Water Practice \& Technology},
  number    = {15 (2)},
  publisher = {IWA Publishing},
  address   = {London},
  issn      = {1751-231X},
  doi       = {10.2166/wpt.2020.027},
  pages     = {386 -- 393},
  year      = {2020},
  abstract  = {Different analytical approaches exist to describe the structural substance or wear reserve of sewer systems. The aim is to convert engineering assessments of often complex defect patterns into computational algorithms and determine a substance class for a sewer section or manhole. This analytically determined information is essential for strategic rehabilitation planning processes up to network level, as it corresponds to the most appropriate rehabilitation type and can thus provide decision-making support. Current calculation methods differ clearly from each other in parts, so that substance classes determined by the different approaches are only partially comparable with each other. The objective of the German R\&D cooperation project 'SubKanS' is to develop a methodology for classifying the specific defect patterns resulting from the interaction of all the individual defects, and their severities and locations. The methodology takes into account the structural substance of sewer sections and manholes, based on real data and theoretical considerations analogous to the condition classification of individual defects. The result is a catalogue of defect patterns and characteristics, as well as associated structural substance classifications of sewer systems (substance classes). The methodology for sewer system substance classification is developed so that the classification of individual defects can be transferred into a substance class of the sewer section or manhole, eventually taking into account further information (e.g. pipe material, nominal diameter, etc.). The result is a validated methodology for automated sewer system substance classification.},
  language  = {en}
}
@article{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Experimental investigation of the face stability of shallow tunnels in sand},
  series = {Acta Geotechnica},
  volume    = {5},
  journal   = {Acta Geotechnica},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1125},
  doi       = {10.1007/s11440-010-0110-7},
  pages     = {43 -- 62},
  year      = {2010},
  abstract  = {Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and L{\´e}ca/Dormieux showed the best agreement to the measurements.},
  language  = {en}
}
@article{KirsteinMuellerWaleckiMingersetal.2012,
  author    = {Kirstein, Simon and M{\"u}ller, Karsten and Walecki-Mingers, Mark and Deserno, Thomas M.},
  title     = {Robust adaptive flow line detection in sewer pipes},
  series = {Automation in construction},
  journal   = {Automation in construction},
  number    = {21},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7891 (E-Journal) ; 0926-5805 (Print)},
  doi       = {10.1016/j.autcon.2011.05.009},
  pages     = {24 -- 31},
  year      = {2012},
  abstract  = {As part of a novel approach to automatic sewer inspection, this paper presents a robust algorithm for automatic flow line detection. A large image repository is obtained from about 50,000 m sewers to represent the high variability of real world sewer systems. Automatic image processing combines Canny edge detection, Hough transform for straight lines and cost minimization using Dijkstra's shortest path algorithm. Assuming that flow lines are mostly smoothly connected horizontal structures, piecewise flow line delineation is reduced to a process of selecting adjacent line candidates. Costs are derived from the gap between adjacent candidates and their reliability. A single parameter α enables simple control of the algorithm. The detected flow line may precisely follow the segmented edges (α = 0.0) or minimize gaps at joints (α = 1.0). Both, manual and ground truth-based analysis indicate that α = 0.8 is optimal and independent of the sewer's material. The algorithm forms an essential step to further automation of sewer inspection.},
  language  = {en}
}
@article{KolymbasFellinKirsch2006,
  author    = {Kolymbas, Dimitrios and Fellin, W. and Kirsch, Ansgar},
  title     = {Squeezing due to stress relaxation in foliated rock},
  series = {International journal for numerical and analytical methods in geomechanics},
  volume    = {Vol. 30},
  journal   = {International journal for numerical and analytical methods in geomechanics},
  number    = {Iss. 13},
  issn      = {1096-9853 (E-Journal); 0363-9061 (Print)},
  doi       = {10.1002/nag.530},
  pages     = {1357 -- 1367},
  year      = {2006},
  language  = {en}
}
@article{KramerValeroChansonetal.2019,
  author    = {Kramer, Matthias and Valero, Daniel and Chanson, Hubert and Bung, Daniel B.},
  title     = {Towards reliable turbulence estimations with phase-detection probes: an adaptive window cross-correlation technique},
  series = {Experiments in Fluids},
  volume    = {60},
  journal   = {Experiments in Fluids},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1114},
  doi       = {10.1007/s00348-018-2650-9},
  year      = {2019},
  language  = {en}
}
@article{KuhnhenneRegerPyschnyetal.2020,
  author    = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd},
  title     = {Influence of airtightness of steel sandwich panel joints on heat losses},
  series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  volume    = {172},
  journal   = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  number    = {Art. 05008},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  doi       = {10.1051/e3sconf/202017205008},
  pages     = {6},
  year      = {2020},
  abstract  = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.},
  language  = {en}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel B. and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@article{LopesLeandroCarvalhoetal.2017,
  author    = {Lopes, Pedro and Leandro, Jorge and Carvalho, Rita F. and Bung, Daniel B.},
  title     = {Alternating skimming flow over a stepped spillway},
  series = {Environmental Fluid Mechanics},
  volume    = {17},
  journal   = {Environmental Fluid Mechanics},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1510},
  doi       = {10.1007/s10652-016-9484-x},
  pages     = {303 -- 322},
  year      = {2017},
  language  = {en}
}
@article{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Initial stage of two-dimensional dam-break waves: laboratory versus VOF},
  series = {Journal of hydraulic research},
  volume    = {50},
  journal   = {Journal of hydraulic research},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  doi       = {10.1080/00221686.2011.639981},
  pages     = {89 -- 97},
  year      = {2012},
  abstract  = {Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.},
  language  = {en}
}
@article{OertelBung2015,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Stability and scour development of bed material on crossbar block ramps},
  series = {International journal of sediment research},
  volume    = {30},
  journal   = {International journal of sediment research},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1001-6279},
  doi       = {10.1016/j.ijsrc.2014.12.003},
  pages     = {344 -- 350},
  year      = {2015},
  abstract  = {Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.},
  language  = {en}
}
@article{ValeroBungCrookston2019,
  author    = {Valero, D. and Bung, Daniel B. and Crookston, B. M.},
  title     = {Closure to "Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways"},
  series = {Journal of Hydraulic Engineering},
  volume    = {146},
  journal   = {Journal of Hydraulic Engineering},
  number    = {2},
  publisher = {ASCE},
  address   = {Reston, Va.},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001669},
  year      = {2019},
  language  = {en}
}
@article{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Sensitivity of turbulent Schmidt number and turbulence model to simulations of jets in crossflow},
  series = {Environmental Modelling and Software},
  volume    = {82},
  journal   = {Environmental Modelling and Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1364-8152 (electronic)},
  doi       = {10.1016/j.envsoft.2016.04.030},
  pages     = {218 -- 228},
  year      = {2016},
  abstract  = {Environmental discharges have been traditionally designed by means of cost-intensive and time-consuming experimental studies. Some extensively validated models based on an integral approach have been often employed for water quality problems, as recommended by USEPA (i.e.: CORMIX). In this study, FLOW-3D is employed for a full 3D RANS modelling of two turbulent jet-to-crossflow cases, including free surface jet impingement. Results are compared to both physical modelling and CORMIX to better assess model performance. Turbulence measurements have been collected for a better understanding of turbulent diffusion's parameter sensitivity. Although both studied models are generally able to reproduce jet trajectory, jet separation downstream of the impingement has been reproduced only by RANS modelling. Additionally, concentrations are better reproduced by FLOW-3D when the proper turbulent Schmidt number is used. This study provides a recommendation on the selection of the turbulence model and the turbulent Schmidt number for future outfall structures design studies.},
  language  = {en}
}