@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{GabrielliSeelmannGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Seelmann, J{\"u}rgen and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {System Architecture of a Lunar Industry Plant Using Regolith},
  series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015},
  pages     = {8 S.},
  year      = {2015},
  language  = {de}
}
@article{GartzenGebhardtAngeretal.1994,
  author    = {Gartzen, Johannes and Gebhardt, Andreas and Anger, A. and Petschke, U. and Lingens, Hans},
  title     = {Laserstrahlschweißen mit Schweißdraht von W{\"a}rmetauschern mit hohem Wirkungsgrad},
  series = {Proceedings : Aachen, Germany, 31st October - 4th November, 1994 / 27th ISATA},
  journal   = {Proceedings : Aachen, Germany, 31st October - 4th November, 1994 / 27th ISATA},
  publisher = {Automotive Automation},
  address   = {Croydon},
  isbn      = {0-947719-64-4},
  pages     = {397 -- 403},
  year      = {1994},
  language  = {de}
}
@article{GartzenLingensSchoenbohmetal.1993,
  author    = {Gartzen, Johannes and Lingens, Hans and Sch{\"o}nbohm, J. and Baumjohann, F. and Gebhardt, Andreas},
  title     = {Laserh{\"a}rten - im Verbund m{\"o}glich. Forschungsverbund Lasertechnik NRW auf der Suche nach neuen Laseranwendungen},
  series = {Technica, Rupperswil. 42 (1993), H. 24},
  journal   = {Technica, Rupperswil. 42 (1993), H. 24},
  isbn      = {0040-866X},
  pages     = {14 -- 18},
  year      = {1993},
  language  = {de}
}
@article{Gebhardt2003,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping : Grundlagen, Verfahren und Einsatzkriterien f{\"u}r die industrielle Praxis},
  series = {Konstruieren mit Kunststoffen. - 3. Aufl.},
  journal   = {Konstruieren mit Kunststoffen. - 3. Aufl.},
  publisher = {Springer -VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-935065-13-2},
  year      = {2003},
  language  = {de}
}
@book{Gebhardt2000,
  author    = {Gebhardt, Andreas},
  title     = {Rapid prototyping : Werkzeug f{\"u}r die schnelle Produktentstehung. - 2., v{\"o}llig {\"u}berarb. Aufl.},
  publisher = {Hanser},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-446-21242-6},
  pages     = {XVII, 409 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {en}
}
@book{Gebhardt2003,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  publisher = {Hanser},
  address   = {Munich [u.a.]},
  isbn      = {3-446-21259-0},
  pages     = {XV, 379 S. : Ill., graph. Darst.},
  year      = {2003},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping and PIV},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Laserwelding with fillerwire},
  series = {LIA handbook of laser material processing / Laser Institute of America},
  journal   = {LIA handbook of laser material processing / Laser Institute of America},
  address   = {Orlando, Florida},
  isbn      = {3-540-41770-2},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Virtual Reality oder Rapid Prototyping?},
  series = {Zeitschrift f{\"u}r die gesamte Wertsch{\"o}pfungskette Automobilwirtschaft (2002)},
  journal   = {Zeitschrift f{\"u}r die gesamte Wertsch{\"o}pfungskette Automobilwirtschaft (2002)},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Vakuumgiessen innerhalb der Produktentstehung},
  series = {Form und Werkzeug (2002)},
  journal   = {Form und Werkzeug (2002)},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt2002,
  author    = {Gebhardt, Andreas},
  title     = {Potenziale und Grenzen virtueller Prototypen},
  year      = {2002},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Lasereinsatz in der Fertigung der Fahrzeugindustrie. Grundlagen der Anwendung von Lasern zur Materialbearbeitung},
  pages     = {1 -- 154},
  year      = {1997},
  language  = {de}
}
@article{Gebhardt1996,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping - Laser-gest{\"u}tzte Revolution der Produktentwicklung. Teil I},
  series = {Laser Magazin (1996)},
  journal   = {Laser Magazin (1996)},
  isbn      = {0945-8875},
  pages     = {6 -- 9},
  year      = {1996},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Aktuelle Trends bei RP und RT},
  series = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  journal   = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  isbn      = {0023-5563},
  pages     = {27 -- 30},
  year      = {1997},
  language  = {de}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklungstendenzen und neue Systeme im Rapid Prototyping},
  series = {Industrie Management. 17 (2001), H. 3},
  journal   = {Industrie Management. 17 (2001), H. 3},
  isbn      = {1434-1980},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {de}
}
@article{Gebhardt1999,
  author    = {Gebhardt, Andreas},
  title     = {Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen},
  series = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  journal   = {Ingenieur-Werkstoffe. 8 (1999), H. 3},
  isbn      = {0935-5715},
  pages     = {8 -- 14},
  year      = {1999},
  language  = {de}
}
@article{Gebhardt1999,
  author    = {Gebhardt, Andreas},
  title     = {Marktentwicklung im Rapid Prototyping},
  series = {Kunststoffe, M{\"u}nchen. 89 (1999), H. 11},
  journal   = {Kunststoffe, M{\"u}nchen. 89 (1999), H. 11},
  isbn      = {0023-5563},
  pages     = {50 -- 55},
  year      = {1999},
  language  = {de}
}
@article{Gebhardt2000,
  author    = {Gebhardt, Andreas},
  title     = {Materialfrage f{\"u}hrt h{\"a}ufig zu Trugschl{\"u}ssen. Wunsch und Wirklichkeit im Rapid Prototyping - Teil 2},
  series = {Industrieanzeiger. 122 (2000), H. 4},
  journal   = {Industrieanzeiger. 122 (2000), H. 4},
  isbn      = {0019-9036},
  pages     = {41 -- 41},
  year      = {2000},
  language  = {de}
}
@article{Gebhardt1998,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Tooling. Der schnelle Weg zum Spritzgießwerkzeug.},
  series = {Kunststoffe, M{\"u}nchen. 88 (1998), H. 11},
  journal   = {Kunststoffe, M{\"u}nchen. 88 (1998), H. 11},
  isbn      = {0023-5563},
  pages     = {1992 -- 2000},
  year      = {1998},
  language  = {de}
}
@article{Gebhardt1989,
  author    = {Gebhardt, Andreas},
  title     = {H{\"a}rten von Kurbelwellen},
  pages     = {1 -- 14},
  year      = {1989},
  language  = {de}
}
@article{Gebhardt2004,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  series = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  journal   = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  publisher = {Heidelberg},
  address   = {Springer},
  isbn      = {3-540-00105-0},
  pages     = {105 -- 123},
  year      = {2004},
  language  = {en}
}
@book{Gebhardt2007,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren - Rapid Prototyping - Rapid Tooling - Rapid Manufacturing, 3. Aufl.},
  edition   = {3},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-22666-1},
  pages     = {XVI, 499 S. : Ill., graph. Darst.},
  year      = {2007},
  language  = {de}
}
@article{Gebhardt2008,
  author    = {Gebhardt, Andreas},
  title     = {Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms},
  series = {Economic Engineering (2008)},
  journal   = {Economic Engineering (2008)},
  isbn      = {1436-3348},
  pages     = {76 -- 79},
  year      = {2008},
  language  = {de}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@incollection{Gebhardt2013,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklung der 3D-Drucktechnologie und Potenziale f{\"u}r die Anwendung im Mittelstand},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {55 -- 59},
  year      = {2013},
  language  = {de}
}
@book{Gebhardt2013,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren : Additive Manufacturing und 3D Drucken f{\"u}r Prototyping - Tooling - Produktion},
  edition   = {4., neu bearbeitete und erweiterte Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-43651-0 ; 978-3-446-43652-7},
  doi       = {10.3139/9783446436527},
  pages     = {XXIV, 637 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2013},
  language  = {de}
}
@book{Gebhardt2014,
  author    = {Gebhardt, Andreas},
  title     = {3D-Drucken : Grundlagen und Anwendungen des Additive Manufacturing (AM)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-44238-2 ; 978-3-446-44237-5},
  pages     = {XIII, 186 S.},
  year      = {2014},
  language  = {de}
}
@inproceedings{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {Generative Fertigungsverfahren in der Produktentwicklung},
  series = {Spritzgießen 2015},
  booktitle = {Spritzgießen 2015},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {VDI-Gesellschaft Kunststofftechnik (VDI-K), Baden-Baden, DE, 10.-11.Feb, 2015},
  isbn      = {978-3-18-234336-3},
  pages     = {1 -- 19},
  year      = {2015},
  language  = {de}
}
@article{Gebhardt2015,
  author    = {Gebhardt, Andreas},
  title     = {3D-Druck ist {\"u}berall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, H{\"a}user, Waffen, B{\"u}sten, Musikinstrumente - alles geht},
  series = {Kunststoffe},
  volume    = {105},
  journal   = {Kunststoffe},
  number    = {10},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  issn      = {0023-5563},
  pages     = {62 -- 70},
  year      = {2015},
  language  = {de}
}
@book{Gebhardt2016,
  author    = {Gebhardt, Andreas},
  title     = {Additive Fertigungsverfahren : Additive Manufacturing und 3D-Drucken f{\"u}r Prototyping - Tooling - Produktion},
  edition   = {5. aktualisierte und erweiterte Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-44401-0 ; 978-3-446-44539-0},
  doi       = {10.3139/9783446445390},
  pages     = {XXIV, 711 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2016},
  language  = {de}
}
@article{GebhardtBackeskrameretal.1995,
  author    = {Gebhardt, Andreas and Backes, G. and kramer, T. and Kreutz, E.-W. (u.a.)},
  title     = {Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik},
  series = {Maschinenmarkt. 101 (1995), H. 12},
  journal   = {Maschinenmarkt. 101 (1995), H. 12},
  isbn      = {0341-5775},
  pages     = {42 -- 45},
  year      = {1995},
  language  = {de}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@article{GebhardtFateri2014,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D-Drucken und die Anwendungen},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {de}
}
@article{GebhardtGuntermannHaeming1997,
  author    = {Gebhardt, Andreas and Guntermann, P. and H{\"a}ming, L.},
  title     = {Schweißen mit dem Nd:YAG-Laser},
  series = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  journal   = {Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4},
  isbn      = {0554-9965},
  pages     = {170 -- 172},
  year      = {1997},
  language  = {de}
}
@article{GebhardtGuntermannSauretal.1996,
  author    = {Gebhardt, Andreas and Guntermann, P. and Saur, G. and Gartzen, Johannes},
  title     = {Neue Impulse f{\"u}r den Leichtbau. Ein Konstruktionsprinzip f{\"u}r Verbauplatten mit Laserschweißen am verdeckten Stoß.},
  series = {Laser-Praxis (1996)},
  journal   = {Laser-Praxis (1996)},
  isbn      = {0937-7069},
  pages     = {21 -- 24},
  year      = {1996},
  language  = {de}
}
@incollection{GebhardtHoetter2019,
  author    = {Gebhardt, Andreas and Hoetter, Jan-Steffen},
  title     = {Rapid Tooling},
  series = {CIRP Encyclopedia of Production Engineering},
  booktitle = {CIRP Encyclopedia of Production Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-53120-4},
  doi       = {10.1007/978-3-662-53120-4},
  pages     = {39 -- 52},
  year      = {2019},
  language  = {en}
}
@book{GebhardtHoetter2016,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen},
  title     = {Additive manufacturing : 3D printing for prototyping and manufacturing},
  publisher = {Hanser Publishers},
  address   = {Munich},
  isbn      = {978-1-56990-582-1 ; 978-1-56990-583-8},
  pages     = {591 S.},
  year      = {2016},
  language  = {en}
}
@article{GebhardtHoetterZiebura2014,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen and Ziebura, Dawid},
  title     = {Impact of SLM build parameters on the surface quality},
  series = {RTejournal - Forum f{\"u}r Rapid Technologien},
  volume    = {11 (2014)},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologien},
  number    = {1},
  issn      = {1614-0923},
  pages     = {1 -- 14},
  year      = {2014},
  language  = {de}
}
@book{GebhardtKesslerSchwarz2019,
  author    = {Gebhardt, Andreas and Kessler, Julia and Schwarz, Alexander},
  title     = {Produktgestaltung f{\"u}r die additive Fertigung},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-45285-5},
  pages     = {XVI, 266 Seiten : Illustrationen, Diagramme},
  year      = {2019},
  language  = {de}
}
@book{GebhardtKesslerThurn2016,
  author    = {Gebhardt, Andreas and Kessler, Julia and Thurn, Laura},
  title     = {3D-Drucken: Grundlagen und Anwendungen des additive manufacturing (AM)},
  edition   = {2., neu bearbeitete und erweiterte Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-44672-4},
  doi       = {10.3139/9783446448452},
  pages     = {XVI, 218 Seiten},
  year      = {2016},
  language  = {de}
}
@book{GebhardtKesslerThurn2019,
  author    = {Gebhardt, Andreas and Kessler, Julia and Thurn, Laura},
  title     = {3D printing : understanding additive manufacturing},
  edition   = {2. Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-1-56990-702-3},
  pages     = {XVI, 204 Seiten},
  year      = {2019},
  language  = {en}
}
@article{GebhardtMathar1994,
  author    = {Gebhardt, Andreas and Mathar, W.},
  title     = {Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle},
  pages     = {188 -- 191},
  year      = {1994},
  language  = {de}
}
@article{GebhardtMatharPlumetal.1996,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H-D. and Wolf, M.},
  title     = {Serienqualit{\"a}t und -st{\"u}ckzahlen durch Abformprozesse},
  pages     = {147 -- 159},
  year      = {1996},
  language  = {de}
}
@article{GebhardtMatharPlum1994,
  author    = {Gebhardt, Andreas and Mathar, W. and Plum, H.-D.},
  title     = {SFM-System Stereolithographie und selektives Lasersintern im Vergleich},
  pages     = {85 -- 95},
  year      = {1994},
  language  = {de}
}
@article{GebhardtPflug1995,
  author    = {Gebhardt, Andreas and Pflug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping. Teil I},
  series = {CAD-CAM Report. 14 (1995), H. 7},
  journal   = {CAD-CAM Report. 14 (1995), H. 7},
  isbn      = {0930-7117},
  pages     = {56 -- 65},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlug1995,
  author    = {Gebhardt, Andreas and Plug, T-K.},
  title     = {Innovationsschub mittels Rapid-Prototyping, Teil II},
  series = {CAD-CAM Report. 14 (1995), H. 9},
  journal   = {CAD-CAM Report. 14 (1995), H. 9},
  isbn      = {0930-7117},
  pages     = {78 -- 85},
  year      = {1995},
  language  = {de}
}
@article{GebhardtPlumMatharetal.1996,
  author    = {Gebhardt, Andreas and Plum, H.D. and Mathar, W. and Wolf, M.},
  title     = {TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen},
  pages     = {231 -- 236},
  year      = {1996},
  language  = {de}
}
@inproceedings{GebhardtRitzSiekmannetal.2014,
  author    = {Gebhardt, Andreas and Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Additive manufacturing businesses in the process chain of individualized mass products},
  series = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  booktitle = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  editor    = {Demmer, Axel},
  publisher = {Fraunhofer},
  address   = {Stuttgart},
  isbn      = {978-3-8396-9128-1 (E-Book)},
  year      = {2014},
  language  = {en}
}