@incollection{HoffschmidtAlexopoulosRauetal.2012,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, P. and Hilger, Patrick},
  title     = {Concentrating solar power},
  series = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications},
  volume    = {3},
  booktitle = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-08-087872-0},
  doi       = {10.1016/B978-0-08-087872-0.00319-X},
  pages     = {595 -- 636},
  year      = {2012},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosRauetal.2021,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Caminos, R.A. Chico and Rend{\´o}n, C. and Hilger, P.},
  title     = {Concentrating Solar Power},
  series = {Earth systems and environmental sciences},
  booktitle = {Earth systems and environmental sciences},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-409548-9},
  doi       = {10.1016/B978-0-12-819727-1.00089-3},
  year      = {2021},
  abstract  = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosRauetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Chico Caminos, R.A. and Rend{\´o}n, C. and Hilger, P.},
  title     = {Concentrating solar power},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  pages     = {670 -- 724},
  year      = {2022},
  abstract  = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.},
  language  = {en}
}
@incollection{HoffschmidtFaber2007,
  author    = {Hoffschmidt, Bernhard and Faber, Christian},
  title     = {Lighthouse project for North-Rhine Westfalia - Solar thermal R \& D Power Planet in J{\"u}lich},
  series = {Energy security, climate change and sustainable development / ed. Jyotirmay Mathur ...},
  booktitle = {Energy security, climate change and sustainable development / ed. Jyotirmay Mathur ...},
  publisher = {Anamaya Publ.},
  address   = {New Delhi},
  isbn      = {81-88342-81-5},
  pages     = {101 -- 116},
  year      = {2007},
  language  = {en}
}
@inproceedings{HoffschmidtSchwarzerSpaeteetal.2006,
  author    = {Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank and K{\"o}tter, Jens and Ebert, Miriam and Sierck, Olaf},
  title     = {Development of a small modular parabolic trough collector},
  series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  publisher = {SolarPaces},
  address   = {[o.O.]},
  organization    = {International Symposium on Concentrating Solar Power and Chemical Energy Systems <13, 2006, Sevilla>},
  isbn      = {8478345191},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@inproceedings{HoffschmidtTelleSauerbornetal.2011,
  author    = {Hoffschmidt, Bernhard and Telle, R. and Sauerborn, Markus and Wagner, M.},
  title     = {Optical measurement system for high temperature absorbers},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{JanotteFecklerKoetteretal.2014,
  author    = {Janotte, N. and Feckler, G. and K{\"o}tter, Jens and Decker, Stefan and Herrmann, Ulf and Schmitz, Mark and L{\"u}pfert, E.},
  title     = {Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification},
  series = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  booktitle = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-63266-904-9},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2014.03.012},
  pages     = {109 -- 117},
  year      = {2014},
  language  = {en}
}
@article{KearneyHerrmannNavaetal.2003,
  author    = {Kearney, D. and Herrmann, Ulf and Nava, P. and Kelly, B. and Mahoney, R. and Pacheco, J. and Cable, R. and Potrovitza, N. and Blake, D. and Price, H.},
  title     = {Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field},
  series = {Journal of Solar Energy Engineering},
  volume    = {125},
  journal   = {Journal of Solar Energy Engineering},
  number    = {2},
  issn      = {1528-8986},
  doi       = {10.1115/1.1565087},
  pages     = {170 -- 176},
  year      = {2003},
  language  = {en}
}
@article{KearneyKellyHerrmannetal.2002,
  author    = {Kearney, David W. and Kelly, Bruce and Herrmann, Ulf and Cable, R. and Pacheco, J. and Mahoney, R. and Price, Henry and Blake, D. and Nava, P. and Potrovitza, N.},
  title     = {Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00191-9},
  pages     = {861 -- 870},
  year      = {2002},
  language  = {en}
}
@inproceedings{KellyHerrmannHale2001,
  author    = {Kelly, Bruce and Herrmann, Ulf and Hale, M.-J.},
  title     = {Optimization Studies for Integrated Solar Combined Cycle Systems},
  series = {Solar engineering 2001 : proceedings of the International Solar Energy Conference ; presented at the 2001 International Solar Energy Conference, a part of Forum 2001 - Solar energy: the power to choose, April 21 - 25, 2001, Washington, D.C.},
  booktitle = {Solar engineering 2001 : proceedings of the International Solar Energy Conference ; presented at the 2001 International Solar Energy Conference, a part of Forum 2001 - Solar energy: the power to choose, April 21 - 25, 2001, Washington, D.C.},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {0-7918-1670-2},
  pages     = {393 -- 398},
  year      = {2001},
  language  = {en}
}
@article{KluczkaEcksteinAlexopoulosetal.2014,
  author    = {Kluczka, Sven and Eckstein, Julian and Alexopoulos, Spiros and Vaeßen, Christiane and Roeb, Martin},
  title     = {Process simulation for solar steam and dry reforming},
  series = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  volume    = {49},
  journal   = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal)},
  doi       = {10.1016/j.egypro.2014.03.092},
  pages     = {850 -- 859},
  year      = {2014},
  abstract  = {In co-operation with the German Aerospace Center, the Solar-Institut J{\"u}lich has been analyzing the different technologies that are available for methanol production from CO2 using solar energy. The aim of the project is to extract CO2 from industrial exhaust gases or directly from the atmosphere to recycle it by use of solar energy. Part of the study was the modeling and simulating of a methane reformer for the production of synthesis gas, which can be operated by solar or hybrid heat sources. The reformer has been simplified in such a way that the model is accurate and enables fast calculations. The developed pseudo-homogeneous one- dimensional model can be regarded as a kind of counter-current heat exchanger and is able to incorporate a steam reforming reaction as well as a dry reforming reaction.},
  language  = {en}
}
@inproceedings{KollSchwarzboezlHenneckeetal.2009,
  author    = {Koll, Gerrit and Schwarzb{\"o}zl, Peter and Hennecke, Klaus and Hartz, Thomas and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {The Solar Tower J{\"u}lich - a research and demonstration plant for central receiver systems},
  series = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  booktitle = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  publisher = {Deutsches Zentrum f. Luft- u. Raumfahrt},
  address   = {Stuttgart},
  isbn      = {9783000287558},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{KreyerMuellerEsch2020,
  author    = {Kreyer, J{\"o}rg and M{\"u}ller, Marvin and Esch, Thomas},
  title     = {A Map-Based Model for the Determination of Fuel Consumption for Internal Combustion Engines as a Function of Flight Altitude},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, „Luft- und Raumfahrt - technologische Br{\"u}cke in die Zukunft", Darmstadt, 30. September bis 2. Oktober 2019},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, „Luft- und Raumfahrt - technologische Br{\"u}cke in die Zukunft", Darmstadt, 30. September bis 2. Oktober 2019},
  publisher = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V},
  address   = {Bonn},
  doi       = {10.25967/490162},
  pages     = {13 Seiten},
  year      = {2020},
  language  = {en}
}
@incollection{KrokerHoffschmidtSchwarzeretal.2008,
  author    = {Kroker, Jan and Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank},
  title     = {PTC 1000 modular parabolic trough collector},
  series = {Process heat collectors : state of the art within task 33/IV ; IEA SHC-Task 33 and SolarPACES-Task IV: Solar heat for industrial processes : F{\"o}rderkennzeichen BMBF 0329273A / Solar Heating and Cooling Executive Committee of the International Energy Agency (IEA) ; ed. Werner Weiss},
  booktitle = {Process heat collectors : state of the art within task 33/IV ; IEA SHC-Task 33 and SolarPACES-Task IV: Solar heat for industrial processes : F{\"o}rderkennzeichen BMBF 0329273A / Solar Heating and Cooling Executive Committee of the International Energy Agency (IEA) ; ed. Werner Weiss},
  publisher = {AEE INTEC},
  address   = {Gleisdorf},
  pages     = {45 -- 46},
  year      = {2008},
  language  = {en}
}
@inproceedings{KronhardtAlexopoulosReisseletal.2015,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Latzke, Markus and Rendon, C. and Sattler, Johannes, Christoph and Herrmann, Ulf},
  title     = {Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant J{\"u}lich using optimized control strategies of the storage system},
  series = {Energy procedia},
  booktitle = {Energy procedia},
  issn      = {1876-6102},
  pages     = {1 -- 6},
  year      = {2015},
  language  = {en}
}
@article{KronhardtAlexopoulosReisseletal.2014,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Sattler, Johannes, Christoph and Hoffschmidt, Bernhard and H{\"a}nel, Matthias and Doerbeck, Till},
  title     = {High-temperature thermal storage system for solar tower power plants with open-volumetric air receiver simulation and energy balancing of a discretized model},
  series = {Energy procedia},
  volume    = {49},
  journal   = {Energy procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal) ; 1876-6102 (Print)},
  doi       = {10.1016/j.egypro.2014.03.094},
  pages     = {870 -- 877},
  year      = {2014},
  abstract  = {This paper describes the modeling of a high-temperature storage system for an existing solar tower power plant with open volumetric receiver technology, which uses air as heat transfer medium (HTF). The storage system model has been developed in the simulation environment Matlab/Simulink®. The storage type under investigation is a packed bed thermal energy storage system which has the characteristics of a regenerator. Thermal energy can be stored and discharged as required via the HTF air. The air mass flow distribution is controlled by valves, and the mass flow by two blowers. The thermal storage operation strategy has a direct and significant impact on the energetic and economic efficiency of the solar tower power plants.},
  language  = {en}
}
@inproceedings{KruegerAnthrakidisFischeretal.2009,
  author    = {Kr{\"u}ger, Dirk and Anthrakidis, Anette and Fischer, Stephan and Lokurlu, Ahmet and Walder, Markus and Croy, Reiner and Quaschning, Volker},
  title     = {Experiences with solar steam supply for an industrial steam network in the P3 Project},
  series = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  booktitle = {SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings},
  publisher = {Deutsches Zentrum f. Luft- u. Raumfahrt},
  address   = {Stuttgart},
  isbn      = {9783000287558},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{LahrsKrisamHerrmann2023,
  author    = {Lahrs, Lennart and Krisam, Pierre and Herrmann, Ulf},
  title     = {Envisioning a collaborative energy system planning platform for the energy transition at the district level},
  series = {The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  booktitle = {The 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems},
  publisher = {Procedings of ECOS 2023},
  doi       = {10.52202/069564-0284},
  pages     = {3163 -- 3170},
  year      = {2023},
  abstract  = {Residential and commercial buildings account for more than one-third of global energy-related greenhouse gas emissions. Integrated multi-energy systems at the district level are a promising way to reduce greenhouse gas emissions by exploiting economies of scale and synergies between energy sources. Planning district energy systems comes with many challenges in an ever-changing environment. Computational modelling established itself as the state-of-the-art method for district energy system planning. Unfortunately, it is still cumbersome to combine standalone models to generate insights that surpass their original purpose. Ideally, planning processes could be solved by using modular tools that easily incorporate the variety of competing and complementing computational models. Our contribution is a vision for a collaborative development and application platform for multi-energy system planning tools at the district level. We present challenges of district energy system planning identified in the literature and evaluate whether this platform can help to overcome these challenges. Further, we propose a toolkit that represents the core technical elements of the platform. Lastly, we discuss community management and its relevance for the success of projects with collaboration and knowledge sharing at their core.},
  language  = {en}
}
@inproceedings{LatzkeAlexopoulosKronhardtetal.2015,
  author    = {Latzke, Markus and Alexopoulos, Spiros and Kronhardt, Valentina and Rend{\´o}n, Carlos and Sattler, Johannes, Christoph},
  title     = {Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver},
  series = {Energy Procedia},
  booktitle = {Energy Procedia},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2015.03.142},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@inproceedings{LuepfertHerrmannPriceetal.2004,
  author    = {L{\"u}pfert, E. and Herrmann, Ulf and Price, Henry and Zarza, E. and Kistener, R.},
  title     = {Towards Standard Performance Analysis for Parabolic Trough Collector Fields},
  series = {12th International Symposium Solar Power and Chemical Energy Systems, October 6-8, 2004, Oaxaca Mexico ; SolarPACES International Symposium, 12},
  booktitle = {12th International Symposium Solar Power and Chemical Energy Systems, October 6-8, 2004, Oaxaca Mexico ; SolarPACES International Symposium, 12},
  editor    = {Ramos, C.},
  publisher = {Instituto de Investigaciones Electricas},
  address   = {[s.l.]},
  isbn      = {968-6114-18-1},
  year      = {2004},
  language  = {en}
}
@inproceedings{MahdiDerschSchmitzetal.2022,
  author    = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno},
  title     = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086269},
  pages     = {11 Seiten},
  year      = {2022},
  abstract  = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@inproceedings{MarcusMelissSpaete1993,
  author    = {Marcus, W. and Meliß, Michael and Sp{\"a}te, F.},
  title     = {Street lighting and advertising with photovoltaics},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {509 -- 514},
  year      = {1993},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@article{MelissNeskakisPlettnerMarlianietal.1998,
  author    = {Meliß, Michael and Neskakis, A. and Plettner-Marliani, J. and Lange, C. and H{\"o}velmann, A. and Schumacher, J.},
  title     = {Waste water recycling supplied by renewable energies : basic conditions and possible treatment technologies},
  series = {Renewable energy. Vol. 14 (1998), iss. 1-4. 6th Arab International Solar Energy Conference: Bringing Solar Energy into the Daylight, Muscat, Sultanate of Oman, 29.03.-01.04.1998},
  journal   = {Renewable energy. Vol. 14 (1998), iss. 1-4. 6th Arab International Solar Energy Conference: Bringing Solar Energy into the Daylight, Muscat, Sultanate of Oman, 29.03.-01.04.1998},
  issn      = {1879-0682 (E-Book); 0960-1481 (Print)},
  pages     = {325 -- 331},
  year      = {1998},
  language  = {en}
}
@inproceedings{MelissNeskakisUsbecketal.1992,
  author    = {Meliß, Michael and Neskakis, A. and Usbeck, S. and Vogelsang, E. and Wagner, L. and Wiediger, J{\"u}rgen},
  title     = {PV-transmitter and receiver},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {375 -- 380},
  year      = {1992},
  language  = {en}
}
@inproceedings{MelissNeskakisUsbecketal.1993,
  author    = {Meliß, Michael and Neskakis, A. and Usbeck, S. and Wagner, L. and Wiediger, J{\"u}rgen},
  title     = {Energy supply by coupled solar systems for decentralized application},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 8: Biomass, agriculture, wind},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 8: Biomass, agriculture, wind},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {343 -- 348},
  year      = {1993},
  language  = {en}
}
@inproceedings{MelissSpaete1993,
  author    = {Meliß, Michael and Sp{\"a}te, F.},
  title     = {The "Summerschool Renewable Energies" at the Fachhochschule Aachen, Abteilung J{\"u}lich/Germany},
  series = {Harmony with nature : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 1: Energy policy, environment and education},
  booktitle = {Harmony with nature : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 1: Energy policy, environment and education},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {371 -- 376},
  year      = {1993},
  language  = {en}
}
@article{MelissSpaete2000,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {The solar heating system with seasonal storage at the Solar-Campus J{\"u}lich},
  series = {Solar energy. Vol. 69 (2000), iss. 6},
  journal   = {Solar energy. Vol. 69 (2000), iss. 6},
  issn      = {0038-092X},
  pages     = {525 -- 533},
  year      = {2000},
  language  = {en}
}
@inproceedings{MelissSpaete1996,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Solar-Campus J{\"u}lich - an interdisciplinary project},
  series = {EuroSun '96 ; 10. Internationales Sonnenforum : proceedings. Bd 3},
  booktitle = {EuroSun '96 ; 10. Internationales Sonnenforum : proceedings. Bd 3},
  publisher = {DGS-Sonnenenergie},
  address   = {M{\"u}nchen},
  pages     = {1281 -- 1285},
  year      = {1996},
  language  = {en}
}
@inproceedings{MelissSpaeteLange1999,
  author    = {Meliß, Michael and Sp{\"a}te, Frank and Lange, Harald},
  title     = {The Solar-Campus J{\"u}lich - an interdisciplinary project},
  series = {Building a new century. 5th Conference on Solar Architecture and Design, Bonn, 27th of May 1998. Ed. by Eurosolar e.V. Ed. by Irm Pontenagel.},
  booktitle = {Building a new century. 5th Conference on Solar Architecture and Design, Bonn, 27th of May 1998. Ed. by Eurosolar e.V. Ed. by Irm Pontenagel.},
  publisher = {Eurosolar-Verl.},
  address   = {Bonn},
  isbn      = {3-933745-03-9},
  pages     = {382 -- 387},
  year      = {1999},
  language  = {en}
}
@inproceedings{MohanGrossMenzeletal.2021,
  author    = {Mohan, Nijanthan and Groß, Rolf Fritz and Menzel, Karsten and Theis, Fabian},
  title     = {Opportunities and Challenges in the Implementation of Building Information Modeling for Prefabrication of Heating, Ventilation and Air Conditioning Systems in Small and Medium-Sized Contracting Companies in Germany - A Case Study},
  series = {WIT Transactions on The Built Environment, Vol. 205},
  booktitle = {WIT Transactions on The Built Environment, Vol. 205},
  publisher = {WIT Press},
  address   = {Southampton},
  issn      = {1743-3509},
  doi       = {10.2495/BIM210101},
  pages     = {117 -- 126},
  year      = {2021},
  abstract  = {FEven though BIM (Building Information Modelling) is successfully implemented in most of the world, it is still in the early stages in Germany, since the stakeholders are sceptical of its reliability and efficiency. The purpose of this paper is to analyse the opportunities and obstacles to implementing BIM for prefabrication. Among all other advantages of BIM, prefabrication is chosen for this paper because it plays a vital role in creating an impact on the time and cost factors of a construction project. The project stakeholders and participants can explicitly observe the positive impact of prefabrication, which enables the breakthrough of the scepticism factor among the small-scale construction companies. The analysis consists of the development of a process workflow for implementing prefabrication in building construction followed by a practical approach, which was executed with two case studies. It was planned in such a way that, the first case study gives a first-hand experience for the workers at the site on the BIM model so that they can make much use of the created BIM model, which is a better representation compared to the traditional 2D plan. The main aim of the first case study is to create a belief in the implementation of BIM Models, which was succeeded by the execution of offshore prefabrication in the second case study. Based on the case studies, the time analysis was made and it is inferred that the implementation of BIM for prefabrication can reduce construction time, ensures minimal wastes, better accuracy, less problem-solving at the construction site. It was observed that this process requires more planning time, better communication between different disciplines, which was the major obstacle for successful implementation. This paper was carried out from the perspective of small and medium-sized mechanical contracting companies for the private building sector in Germany.},
  language  = {en}
}
@inproceedings{NeumannAdamBackesetal.2021,
  author    = {Neumann, Hannah and Adam, Mario and Backes, Klaus and B{\"o}rner, Martin and Clees, Tanja and Doetsch, Christian and Glaeser, Susanne and Herrmann, Ulf and May, Johanna and Rosenthal, Florian and Sauer, Dirk Uwe and Stadler, Ingo},
  title     = {Development of open educational resources for renewable energy and the energy transition process},
  series = {ISES SWC 2021},
  booktitle = {ISES SWC 2021},
  publisher = {International Solar Energy Society},
  address   = {Freiburg},
  doi       = {10.18086/swc.2021.47.03},
  pages     = {6 Seiten},
  year      = {2021},
  abstract  = {The dissemination of knowledge about renewable energies is understood as a social task with the highest topicality. The transfer of teaching content on renewable energies into digital open educational resources offers the opportunity to significantly accelerate the implementation of the energy transition. Thus, in the here presented project six German universities create open educational resources for the energy transition. These materials are available to the public on the internet under a free license. So far there has been no publicly accessible, editable media that cover entire learning units about renewable energies extensively and in high technical quality. Thus, in this project, the content that remains up-to-date for a longer period is appropriately prepared in terms of media didactics. The materials enable lecturers to provide students with in-depth training about technologies for the energy transition. In a particular way, the created material is also suitable for making the general public knowledgeable about the energy transition with scientifically based material.},
  language  = {en}
}
@inproceedings{NiederwestbergSchneiderTeixeiraBouraetal.2022,
  author    = {Niederwestberg, Stefan and Schneider, Falko and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Introduction to a direct irradiated transparent tube particle receiver},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086735},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {New materials often lead to innovations and advantages in technical applications. This also applies to the particle receiver proposed in this work that deploys high-temperature and scratch resistant transparent ceramics. With this receiver design, particles are heated through direct-contact concentrated solar irradiance while flowing downwards through tubular transparent ceramics from top to bottom. In this paper, the developed particle receiver as well as advantages and disadvantages are described. Investigations on the particle heat-up characteristics from solar irradiance were carried out with DEM simulations which indicate that particle temperatures can reach up to 1200 K. Additionally, a simulation model was set up for investigating the dynamic behavior. A test receiver at laboratory scale has been designed and is currently being built. In upcoming tests, the receiver test rig will be used to validate the simulation results. The design and the measurement equipment is described in this work.},
  language  = {en}
}
@article{PeereBlanke2022,
  author    = {Peere, Wouter and Blanke, Tobias},
  title     = {GHEtool: An open-source tool for borefield sizing in Python},
  series = {Journal of Open Source Software},
  volume    = {7},
  journal   = {Journal of Open Source Software},
  number    = {76},
  editor    = {Vernon, Chris},
  issn      = {2475-9066},
  doi       = {10.21105/joss.04406},
  pages     = {1 -- 4, 4406},
  year      = {2022},
  abstract  = {GHEtool is a Python package that contains all the functionalities needed to deal with borefield design. It is developed for both researchers and practitioners. The core of this package is the automated sizing of borefield under different conditions. The sizing of a borefield is typically slow due to the high complexity of the mathematical background. Because this tool has a lot of precalculated data, GHEtool can size a borefield in the order of tenths of milliseconds. This sizing typically takes the order of minutes. Therefore, this tool is suited for being implemented in typical workflows where iterations are required. GHEtool also comes with a graphical user interface (GUI). This GUI is prebuilt as an exe-file because this provides access to all the functionalities without coding. A setup to install the GUI at the user-defined place is also implemented and available at: https://www.mech.kuleuven.be/en/tme/research/thermal_systems/tools/ghetool.},
  language  = {en}
}
@inproceedings{PompSchwarzboezlKolletal.2010,
  author    = {Pomp, Stefan and Schwarzb{\"o}zl, Peter and Koll, Gerrit and Hennecke, Klaus and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {Advanced concept for a solar thermal power plant with open volumetric air receiver},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {97 -- 98},
  year      = {2010},
  language  = {en}
}
@article{PuppeGiulianoFrantzetal.2018,
  author    = {Puppe, Michael and Giuliano, Stefano and Frantz, Cathy and Uhlig, Ralf and Schumacher, Ralph and Ibraheem, Wagdi and Schmalz, Stefan and Waldmann, Barbara and Guder, Christoph and Peter, Dennis and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Alexopoulos, Spiros and Spiegel, Michael and Wortmann, J{\"u}rgen and Hinrichs, Matthias and Engelhard, Manfred and Aust, Michael},
  title     = {Techno-economic optimization of molten salt solar tower plants},
  series = {AIP Conference Proceedings art.no. 040033},
  volume    = {2033},
  journal   = {AIP Conference Proceedings art.no. 040033},
  number    = {Issue 1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  doi       = {10.1063/1.5067069},
  year      = {2018},
  abstract  = {In this paper the results of a techno-economic analysis of improved and optimized molten salt solar tower plants (MSSTP plants) are presented. The potential improvements that were analyzed include different receiver designs, different designs of the HTF-system and plant control, increased molten salt temperatures (up to 640°C) and multi-tower systems. Detailed technological and economic models of the solar field, solar receiver and high temperature fluid system (HTF-system) were developed and used to find potential improvements compared to a reference plant based on Solar Two technology and up-to-date cost estimations. The annual yield model calculates the annual outputs and the LCOE of all variants. An improved external tubular receiver and improved HTF-system achieves a significant decrease of LCOE compared to the reference. This is caused by lower receiver cost as well as improvements of the HTF-system and plant operation strategy, significantly reducing the plant own consumption. A novel star receiver shows potential for further cost decrease. The cavity receiver concepts result in higher LCOE due to their high investment cost, despite achieving higher efficiencies. Increased molten salt temperatures seem possible with an adapted, closed loop HTF-system and achieve comparable results to the original improved system (with 565°C) under the given boundary conditions. In this analysis all multi tower systems show lower economic viability compared to single tower systems, caused by high additional cost for piping connections and higher cost of the receivers. REFERENCES},
  language  = {en}
}
@article{RauAlexopoulosBreitbachetal.2014,
  author    = {Rau, Christoph and Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Latzke, Markus and Sattler, Johannes, Christoph},
  title     = {Transient simulation of a solar-hybrid tower power plant with open volumetric receiver at the location Barstow},
  series = {Energy procedia : proceedings of the SolarPACES 2013 International Conference},
  volume    = {49},
  journal   = {Energy procedia : proceedings of the SolarPACES 2013 International Conference},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2014.03.157},
  pages     = {1481 -- 1490},
  year      = {2014},
  abstract  = {In this work the transient simulations of four hybrid solar tower power plant concepts with open-volumetric receiver technology for a location in Barstow-Daggett, USA, are presented. The open-volumetric receiver uses ambient air as heat transfer fluid and the hybridization is realized with a gas turbine. The Rankine cycle is heated by solar-heated air and/or by the gas turbine's flue gases. The plant can be operated in solar-only, hybrid parallel or combined cycle-only mode as well as in any intermediate load levels where the solar portion can vary between 0 to 100\%. The simulated plant is based on the configuration of a solar-hybrid power tower project, which is in planning for a site in Northern Algeria. The meteorological data for Barstow-Daggett was taken from the software meteonorm. The solar power tower simulation tool has been developed in the simulation environment MATLAB/Simulink and is validated.},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors influencing the formation of weld defects in non-vacuum electron beam welding},
  series = {The Paton welding journal},
  volume    = {2012},
  journal   = {The Paton welding journal},
  number    = {2},
  publisher = {Paton Publishing House},
  address   = {Kiev},
  issn      = {0957-798X},
  pages     = {11 -- 18},
  year      = {2012},
  abstract  = {The influence of welding condition parameters and properties of material on formation of defects, such as humping and undercuts, in non-vacuum electron beam welding was investigated. The influence of separate welding parameters on the quality of welds was determined.},
  language  = {en}
}
@inproceedings{RendonDieckmannWeidleetal.2018,
  author    = {Rendon, Carlos and Dieckmann, Simon and Weidle, Mathias and Dersch, J{\"u}rgen and Teixeira Boura, Cristiano Jos{\´e} and Polklas, Thomas and Kuschel, Marcus and Herrmann, Ulf},
  title     = {Retrofitting of existing parabolic trough collector power plants with molten salt tower systems},
  series = {AIP Conference Proceedings},
  volume    = {2033},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  doi       = {10.1063/1.5067030},
  pages     = {030014-1 -- 030014-8},
  year      = {2018},
  language  = {en}
}
@inproceedings{RendonSchwagerGhiasietal.2020,
  author    = {Rendon, Carlos and Schwager, Christian and Ghiasi, Mona and Schmitz, Pascal and Bohang, Fakhri and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029974},
  pages     = {170012-1 -- 170012-9},
  year      = {2020},
  language  = {en}
}
@inproceedings{SattlerAttiAlexopoulosetal.2022,
  author    = {Sattler, Johannes Christoph and Atti, Vikrama and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis},
  title     = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {VOL. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.731},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.},
  language  = {en}
}
@inproceedings{SattlerSchneiderAngeleetal.2022,
  author    = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Development of heliostat field calibration methods: Theory and experimental test results},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {Vol. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.678},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosCaminosetal.2019,
  author    = {Sattler, Johannes, Christoph and Alexopoulos, Spiros and Caminos, Ricardo Alexander Chico and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@inproceedings{SattlerCaminosUerlingsetal.2020,
  author    = {Sattler, Johannes, Christoph and Caminos, Ricardo Alexander Chico and {\"U}rlings, Nicolas and Dutta, Siddharth and Ruiz, Victor and Kalogirou, Soteris and Ktistis, Panayiotis and Agathokleous, Rafaela and Jung, Christian and Alexopoulos, Spiros and Atti, Vikrama Nagababu and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029278},
  pages     = {140004-1 -- 140004-10},
  year      = {2020},
  language  = {en}
}
@article{SattlerRoegerSchwarzboezletal.2020,
  author    = {Sattler, Johannes, Christoph and R{\"o}ger, Marc and Schwarzb{\"o}zl, Peter and Buck, Reiner and Macke, Ansgar and Raeder, Christian and G{\"o}ttsche, Joachim},
  title     = {Review of heliostat calibration and tracking control methods},
  series = {Solar Energy},
  volume    = {207},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.solener.2020.06.030},
  pages     = {110 -- 132},
  year      = {2020},
  abstract  = {Large scale central receiver systems typically deploy between thousands to more than a hundred thousand heliostats. During solar operation, each heliostat is aligned individually in such a way that the overall surface normal bisects the angle between the sun's position and the aim point coordinate on the receiver. Due to various tracking error sources, achieving accurate alignment ≤1 mrad for all the heliostats with respect to the aim points on the receiver without a calibration system can be regarded as unrealistic. Therefore, a calibration system is necessary not only to improve the aiming accuracy for achieving desired flux distributions but also to reduce or eliminate spillage. An overview of current larger-scale central receiver systems (CRS), tracking error sources and the basic requirements of an ideal calibration system is presented. Leading up to the main topic, a description of general and specific terms on the topics heliostat calibration and tracking control clarifies the terminology used in this work. Various figures illustrate the signal flows along various typical components as well as the corresponding monitoring or measuring devices that indicate or measure along the signal (or effect) chain. The numerous calibration systems are described in detail and classified in groups. Two tables allow the juxtaposition of the calibration methods for a better comparison. In an assessment, the advantages and disadvantages of individual calibration methods are presented.},
  language  = {en}
}
@inproceedings{Sauerborn2011,
  author    = {Sauerborn, Markus},
  title     = {Investigations to the influence of clouds and aerosols to the haze of the sunshape},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{SauerbornArshadiRohrmoser2012,
  author    = {Sauerborn, Markus and Arshadi, S. and Rohrmoser, R.},
  title     = {Influence of clouds and aerosols to the haze of the sunshape},
  series = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  booktitle = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Solar Energy Society},
  pages     = {3887 -- 3894},
  year      = {2012},
  language  = {en}
}
@inproceedings{SauerbornHoffschmidtTelleetal.2012,
  author    = {Sauerborn, Markus and Hoffschmidt, Bernhard and Telle, R. and Wagner, M.},
  title     = {Heatable optical analyse system for high temperature absorbers},
  series = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  booktitle = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Solar Energy Society},
  isbn      = {978-1-61839-364-7},
  pages     = {3852 -- 3860},
  year      = {2012},
  language  = {en}
}
@inproceedings{SauerbornKlimekHoffschmidtetal.2012,
  author    = {Sauerborn, Markus and Klimek, J. and Hoffschmidt, Bernhard and Essen, H. and Sieger, S. and Biegel, G. and G{\"o}ttsche, Joachim and Hilger, Patrick},
  title     = {Eurosun 2012 : radar technology for heliostat posititon control},
  series = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  booktitle = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  address   = {Rijeka},
  pages     = {ID 80},
  year      = {2012},
  language  = {en}
}