@inproceedings{DiltheySchleserHeggeretal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan},
  title     = {Load-bearing behaviour of polymer-impregnated textiles in concrete},
  series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  editor    = {Reinhardt, Hans W.},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>},
  isbn      = {978-2-35158-046-2},
  pages     = {183 -- 192},
  year      = {2007},
  language  = {en}
}
@inproceedings{DiltheySchleserMoelleretal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.},
  title     = {Application of polymers in textile reinforced concrete : from the interface to construction elements},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {55 -- 64},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserPuterman2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Puterman, Moshe},
  title     = {Investigation and improvement of concrete reinforced with epoxy impregnated fabrics},
  series = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  booktitle = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007},
  publisher = {Kangwoon National Univ.},
  address   = {Chancheon},
  isbn      = {978-89-9600450-9},
  pages     = {725 -- 733},
  year      = {2007},
  language  = {en}
}
@article{DuesGebhardtKallweitetal.1994,
  author    = {Dues, M. and Gebhardt, Andreas and Kallweit, Stephan and Scheffler, T. and Siekmann, H. and Uchiyama, T.},
  title     = {Flow Visualization in a Cavitating Flow},
  series = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  journal   = {Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. M{\"u}ller ...},
  publisher = {Kernforschungszentrum Karlsruhe},
  address   = {Karlsruhe},
  pages     = {391 -- 402},
  year      = {1994},
  language  = {en}
}
@inproceedings{EichlerSkupinThurnetal.2019,
  author    = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas},
  title     = {Operating limits for beam melting of glass materials},
  series = {Modern Technologies in Manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern Technologies in Manufacturing (MTeM 2019)},
  number    = {Article 01004},
  doi       = {10.1051/matecconf/201929901004},
  pages     = {8 Seiten},
  year      = {2019},
  abstract  = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.},
  language  = {en}
}
@book{EngelnMuellgesUhlig1996,
  author    = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank},
  title     = {Numeric Algorithms with Fortran},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-60529-0},
  pages     = {XXII, 602 S. : Ill., graph. Darst. + 1 CD-ROM},
  year      = {1996},
  language  = {en}
}
@book{EngelnMuellgesUhlig1996,
  author    = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank},
  title     = {Numerical algorithms with C},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-60530-0},
  pages     = {XXII, 596 S. : graph. Darst. + 1 CD-ROM},
  year      = {1996},
  language  = {en}
}
@inproceedings{EngemannBadriWenningetal.2019,
  author    = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan},
  title     = {Implementation of an Autonomous Tool Trolley in a Production Line},
  series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-19648-6},
  doi       = {10.1007/978-3-030-19648-6_14},
  pages     = {117 -- 125},
  year      = {2019},
  language  = {en}
}
@article{EngemannCoenenDawaretal.2021,
  author    = {Engemann, Heiko and C{\"o}nen, Patrick and Dawar, Harshal and Du, Shengzhi and Kallweit, Stephan},
  title     = {A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator},
  series = {Applied Sciences},
  volume    = {11},
  journal   = {Applied Sciences},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app11199271},
  pages     = {1 -- 22},
  year      = {2021},
  abstract  = {Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human-robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.},
  language  = {en}
}
@article{EngemannDuKallweitetal.2020,
  author    = {Engemann, Heiko and Du, Shengzhi and Kallweit, Stephan and C{\"o}nen, Patrick and Dawar, Harshal},
  title     = {OMNIVIL - an autonomous mobile manipulator for flexible production},
  series = {Sensors},
  volume    = {20},
  journal   = {Sensors},
  number    = {24, art. no. 7249},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {1424-8220},
  doi       = {10.3390/s20247249},
  pages     = {1 -- 30},
  year      = {2020},
  language  = {en}
}
@incollection{EngemannDuKallweitetal.2020,
  author    = {Engemann, Heiko and Du, Shengzhi and Kallweit, Stephan and Ning, Chuanfang and Anwar, Saqib},
  title     = {AutoSynPose: Automatic Generation of Synthetic Datasets for 6D Object Pose Estimation},
  series = {Machine Learning and Artificial Intelligence. Proceedings of MLIS 2020},
  booktitle = {Machine Learning and Artificial Intelligence. Proceedings of MLIS 2020},
  publisher = {IOS Press},
  address   = {Amsterdam},
  isbn      = {978-1-64368-137-5},
  doi       = {10.3233/FAIA200770},
  pages     = {89 -- 97},
  year      = {2020},
  abstract  = {We present an automated pipeline for the generation of synthetic datasets for six-dimension (6D) object pose estimation. Therefore, a completely automated generation process based on predefined settings is developed, which enables the user to create large datasets with a minimum of interaction and which is feasible for applications with a high object variance. The pipeline is based on the Unreal 4 (UE4) game engine and provides a high variation for domain randomization, such as object appearance, ambient lighting, camera-object transformation and distractor density. In addition to the object pose and bounding box, the metadata includes all randomization parameters, which enables further studies on randomization parameter tuning. The developed workflow is adaptable to other 3D objects and UE4 environments. An exemplary dataset is provided including five objects of the Yale-CMU-Berkeley (YCB) object set. The datasets consist of 6 million subsegments using 97 rendering locations in 12 different UE4 environments. Each dataset subsegment includes one RGB image, one depth image and one class segmentation image at pixel-level.},
  language  = {en}
}
@inproceedings{EngemannWiesenKallweitetal.2018,
  author    = {Engemann, Heiko and Wiesen, Patrick and Kallweit, Stephan and Deshpande, Harshavardhan and Schleupen, Josef},
  title     = {Autonomous mobile manipulation using ROS},
  series = {Advances in Service and Industrial Robotics},
  booktitle = {Advances in Service and Industrial Robotics},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-61276-8},
  doi       = {10.1007/978-3-319-61276-8_43},
  pages     = {389 -- 401},
  year      = {2018},
  language  = {en}
}
@article{EnningBaier2009,
  author    = {Enning, Manfred and Baier, M.},
  title     = {Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.},
  series = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  journal   = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  address   = {Stavanger},
  pages     = {CD-Rom},
  year      = {2009},
  language  = {en}
}
@article{EnningBernhardRake1994,
  author    = {Enning, Manfred and Bernhard, S. and Rake, H.},
  title     = {Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H.},
  series = {Control Engineering Practice. 2 (1994), H. 6},
  journal   = {Control Engineering Practice. 2 (1994), H. 6},
  isbn      = {0967-0661},
  pages     = {961 -- 967},
  year      = {1994},
  language  = {en}
}
@article{EnningHueckerJenayehetal.1999,
  author    = {Enning, Manfred and H{\"u}cker, Jan and Jenayeh, Imad and Rake, Heinrich},
  title     = {A Parametric Identification Scheme for a Self-tuning Industrial Compact Controller - INTERKAMA 1999 / Hucker, Jan ; Jenayeh, Imad ; Enning, Manfred ; Rake, Heinrich},
  year      = {1999},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1998,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.},
  title     = {Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; M{\"u}ller, C.; Kositza, N. ; Enning, M. ; Rake, H.},
  series = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998},
  journal   = {Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Sk{\"o}vde, Sweden, 9-11 September 1998},
  publisher = {Pergamon},
  address   = {Amsterdam},
  isbn      = {0-08-043339-1},
  pages     = {xxi, 918 S. : graph. Darst.},
  year      = {1998},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1998,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.},
  title     = {A New Approach for Automating Shunting Processes in Marshalling Yards / Jenayeh, I.; M{\"u}ller, C. ; Kositza, N. ; Enning, M. ; Rake, H.},
  series = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne},
  journal   = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne},
  publisher = {UCIS},
  address   = {Villeneuve d'Ascq},
  pages     = {338 -- 343},
  year      = {1998},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1997,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Rake, Heinrich},
  title     = {Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; M{\"u}ller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.},
  year      = {1997},
  language  = {en}
}
@article{EnningMannBolligetal.2003,
  author    = {Enning, Manfred and Mann, S. and Bollig, A. and Kaierle, S.},
  title     = {Autonomous Production Cell for Laser Beam Welding / Mann S. ; Bollig, A. ; Kaierle, S. ; Abel, D. ; Poprawe, R.},
  publisher = {LIA},
  address   = {Orlando, Fla},
  isbn      = {0912035757},
  year      = {2003},
  language  = {en}
}
@article{EnningStuetzleVierecketal.2006,
  author    = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton},
  title     = {Creepage control for use in wheelslide protection systems / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk},
  series = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  journal   = {Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control},
  isbn      = {0742-5953},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@article{EnningZambouAbel2005,
  author    = {Enning, Manfred and Zambou, N. and Abel, D.},
  title     = {Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.},
  series = {Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese},
  journal   = {Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese},
  publisher = {Elsevier},
  address   = {Oxford},
  isbn      = {0080442501},
  pages     = {733 -- 738},
  year      = {2005},
  language  = {en}
}
@article{EnningZambouAbel2004,
  author    = {Enning, Manfred and Zambou, Nathan and Abel, Dirk},
  title     = {Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk},
  series = {NOLCOS, IFAC Symposium on Nonlinear Control Systems},
  journal   = {NOLCOS, IFAC Symposium on Nonlinear Control Systems},
  pages     = {1211 -- 1216},
  year      = {2004},
  language  = {en}
}
@inproceedings{EvansBraunUlmeretal.2022,
  author    = {Evans, Benjamin and Braun, Sebastian and Ulmer, Jessica and Wollert, J{\"o}rg},
  title     = {AAS implementations - current problems and solutions},
  series = {20th International Conference on Mechatronics - Mechatronika (ME)},
  booktitle = {20th International Conference on Mechatronics - Mechatronika (ME)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-6654-1040-3},
  doi       = {10.1109/ME54704.2022.9982933},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Additive manufactured mechanical disentanglement lock},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {12},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective Laser Melting of Soda-Lime Glass Powder},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1744-7402},
  doi       = {10.1111/ijac.12338},
  pages     = {53 -- 61},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  isbn      = {1744-7402},
  doi       = {10.1111/ijac.12326},
  pages     = {46 -- 52},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardt2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Jewelry fabrication via selective laser melting of glass},
  series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  isbn      = {978-0-7918-4583-7},
  doi       = {10.1115/ESDA2014-20380},
  pages     = {V001T06A005},
  year      = {2014},
  abstract  = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.},
  language  = {en}
}
@incollection{FateriGebhardt2020,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Introduction to Additive Manufacturing},
  series = {3D Printing of Optical Components},
  booktitle = {3D Printing of Optical Components},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-58960-8},
  doi       = {10.1007/978-3-030-58960-8_1},
  pages     = {1 -- 22},
  year      = {2020},
  abstract  = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtGabriellietal.2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Großmann, Agnes and Schnauffer, Peter and Middendorf, Peter},
  title     = {Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant},
  series = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardtKhosravi2013,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar},
  title     = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications},
  series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  publisher = {ASME},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5618-5},
  pages     = {V02AT02A008},
  year      = {2013},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces},
  series = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  booktitle = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  pages     = {9 S.},
  year      = {2015},
  abstract  = {The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@inproceedings{FerreinKallweitScholletal.2015,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid and Reichert, Walter},
  title     = {Learning to Program Mobile Robots in the ROS Summer School Series},
  series = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  booktitle = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  pages     = {6 S.},
  year      = {2015},
  abstract  = {The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.},
  language  = {en}
}
@inproceedings{FerreinSchifferKallweit2018,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Kallweit, Stephan},
  title     = {The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe},
  series = {ROBOT 2017: Third Iberian Robotics Conference},
  booktitle = {ROBOT 2017: Third Iberian Robotics Conference},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-70836-2},
  doi       = {10.1007/978-3-319-70836-2_31},
  pages     = {370 -- 381},
  year      = {2018},
  language  = {en}
}
@article{FrankoDuKallweitetal.2020,
  author    = {Franko, Josef and Du, Shengzhi and Kallweit, Stephan and Duelberg, Enno Sebastian and Engemann, Heiko},
  title     = {Design of a Multi-Robot System for Wind Turbine Maintenance},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {10},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13102552},
  pages     = {Article 2552},
  year      = {2020},
  abstract  = {The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future.},
  language  = {en}
}
@incollection{FranzenSteckenPfaffetal.2019,
  author    = {Franzen, Julian and Stecken, Jannis and Pfaff, Raphael and Kuhlenk{\"o}tter, Bernd},
  title     = {Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System},
  series = {Advances in Production, Logistics and Traffic},
  booktitle = {Advances in Production, Logistics and Traffic},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-13535-5},
  doi       = {10.1007/978-3-030-13535-5_19},
  pages     = {265 -- 276},
  year      = {2019},
  abstract  = {In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.},
  language  = {en}
}
@article{FranzenPindersPfaffetal.2018,
  author    = {Franzen, Julius and Pinders, Erik and Pfaff, Raphael and Enning, Manfred},
  title     = {RailCrowd's virtual fleets: Make most of your asset data},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {9},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {11 -- 13},
  year      = {2018},
  abstract  = {For smaller railway operators or those with a diverse fleet, it can be difficult to collect sufficient data to improve maintenance programs. At the same time, new rules such as entity in charge of maintenance - ECM - regulations impose an additional workload by requiring a dedicated maintenance management system and specific reports. The RailCrowd platform sets out to facilitate compliance with ECM and similar regulations while at the same time pooling anonymised fleet data across operators to form virtual fleets, providing greater data insights.},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {89},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {2},
  issn      = {0940-483X},
  pages     = {130 -- 134},
  year      = {1985},
  language  = {en}
}
@article{FrohbergAnik1983,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {10},
  issn      = {0044-3093},
  pages     = {665 -- 666},
  year      = {1983},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The calculation of component activities of binary metallic melts from their gas solubilities},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {76},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {2},
  issn      = {0044-3093},
  pages     = {135 -- 137},
  year      = {1985},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{GaoBabilonPfaffetal.2018,
  author    = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.},
  title     = {Model of wheel-rail contact for sanding and adhesion enhancement},
  series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  isbn      = {978-946186963-0},
  pages     = {314 -- 321},
  year      = {2018},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Short course on rapid prototyping},
  year      = {2005},
  abstract  = {Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP)},
  language  = {en}
}
@book{Gebhardt2000,
  author    = {Gebhardt, Andreas},
  title     = {Rapid prototyping : Werkzeug f{\"u}r die schnelle Produktentstehung. - 2., v{\"o}llig {\"u}berarb. Aufl.},
  publisher = {Hanser},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-446-21242-6},
  pages     = {XVII, 409 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {en}
}
@book{Gebhardt2003,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  publisher = {Hanser},
  address   = {Munich [u.a.]},
  isbn      = {3-446-21259-0},
  pages     = {XV, 379 S. : Ill., graph. Darst.},
  year      = {2003},
  language  = {en}
}