@inproceedings{GehlerOberBloebaumDachwald2009,
  author    = {Gehler, M. and Ober-Bl{\"o}baum, S. and Dachwald, Bernd},
  title     = {Application of discrete mechanics and optimal control to spacecraft in non-keplerian motion around small solar system bodies},
  series = {Procceedings of the 60th International Astronautical Congress},
  booktitle = {Procceedings of the 60th International Astronautical Congress},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-161567908-9},
  pages     = {1360 -- 1371},
  year      = {2009},
  abstract  = {Prolonged operations close to small solar system bodies require a sophisticated control logic to minimize propellant mass and maximize operational efficiency. A control logic based on Discrete Mechanics and Optimal Control (DMOC) is proposed and applied to both conventionally propelled and solar sail spacecraft operating at an arbitrarily shaped asteroid in the class of Itokawa. As an example, stand-off inertial hovering is considered, recently identified as a challenging part of the Marco Polo mission. The approach is easily extended to stand-off orbits. We show that DMOC is applicable to spacecraft control at small objects, in particular with regard to the fact that the changes in gravity are exploited by the algorithm to optimally control the spacecraft position. Furthermore, we provide some remarks on promising developments.},
  language  = {en}
}
@phdthesis{Geenen2013,
  author    = {Geenen, Eva-Maria},
  title     = {Studies of Epstein-Barr virus EBNA2 and its interactions with host cell factors},
  publisher = {Universit{\´e} de Grenoble},
  address   = {Grenoble},
  pages     = {125 S.},
  year      = {2013},
  language  = {en}
}
@inproceedings{GedleSchmitzGielenetal.2022,
  author    = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Chico Caminos, Ricardo Alexander and Dersch, J{\"u}rgen},
  title     = {Analysis of an integrated CSP-PV hybrid power plant},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086236},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.},
  language  = {en}
}
@article{GebhardtJarkeJacobs1997,
  author    = {Gebhardt, Michael and Jarke, Matthias and Jacobs, Stephan},
  title     = {A Toolkit for Negotiation Support Interfaces to Multidimensional Data},
  series = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman},
  journal   = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman},
  publisher = {ACM Press},
  address   = {New York, NY},
  isbn      = {0897919114},
  pages     = {XIV, 586 S : Ill., graph. Darst.},
  year      = {1997},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5 B},
  journal   = {Physics Procedia},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2010.08.082},
  pages     = {543 -- 549},
  year      = {2010},
  abstract  = {Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.},
  language  = {en}
}
@article{GebhardtSchmidt2002,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael},
  title     = {Practical experiences with making and finishing of coloured models using 3D printing},
  year      = {2002},
  language  = {en}
}
@inproceedings{GebhardtRitzSiekmannetal.2014,
  author    = {Gebhardt, Andreas and Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Additive manufacturing businesses in the process chain of individualized mass products},
  series = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  booktitle = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  editor    = {Demmer, Axel},
  publisher = {Fraunhofer},
  address   = {Stuttgart},
  isbn      = {978-3-8396-9128-1 (E-Book)},
  year      = {2014},
  language  = {en}
}
@book{GebhardtKesslerThurn2019,
  author    = {Gebhardt, Andreas and Kessler, Julia and Thurn, Laura},
  title     = {3D printing : understanding additive manufacturing},
  edition   = {2. Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-1-56990-702-3},
  pages     = {XVI, 204 Seiten},
  year      = {2019},
  language  = {en}
}
@book{GebhardtHoetter2016,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen},
  title     = {Additive manufacturing : 3D printing for prototyping and manufacturing},
  publisher = {Hanser Publishers},
  address   = {Munich},
  isbn      = {978-1-56990-582-1 ; 978-1-56990-583-8},
  pages     = {591 S.},
  year      = {2016},
  language  = {en}
}
@incollection{GebhardtHoetter2019,
  author    = {Gebhardt, Andreas and Hoetter, Jan-Steffen},
  title     = {Rapid Tooling},
  series = {CIRP Encyclopedia of Production Engineering},
  booktitle = {CIRP Encyclopedia of Production Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-53120-4},
  doi       = {10.1007/978-3-662-53120-4},
  pages     = {39 -- 52},
  year      = {2019},
  language  = {en}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@misc{Gebhardt2005,
  author    = {Gebhardt, Andreas},
  title     = {Short course on rapid prototyping},
  year      = {2005},
  abstract  = {Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP)},
  language  = {en}
}
@book{Gebhardt2000,
  author    = {Gebhardt, Andreas},
  title     = {Rapid prototyping : Werkzeug f{\"u}r die schnelle Produktentstehung. - 2., v{\"o}llig {\"u}berarb. Aufl.},
  publisher = {Hanser},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-446-21242-6},
  pages     = {XVII, 409 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {en}
}
@book{Gebhardt2003,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  publisher = {Hanser},
  address   = {Munich [u.a.]},
  isbn      = {3-446-21259-0},
  pages     = {XV, 379 S. : Ill., graph. Darst.},
  year      = {2003},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping and PIV},
  year      = {2001},
  language  = {en}
}
@article{Gebhardt2001,
  author    = {Gebhardt, Andreas},
  title     = {Laserwelding with fillerwire},
  series = {LIA handbook of laser material processing / Laser Institute of America},
  journal   = {LIA handbook of laser material processing / Laser Institute of America},
  address   = {Orlando, Florida},
  isbn      = {3-540-41770-2},
  year      = {2001},
  language  = {en}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"},
  year      = {2006},
  abstract  = {Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering - Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision},
  subject      = {Rapid prototyping},
  language  = {en}
}
@article{Gebhardt2004,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  series = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  journal   = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  publisher = {Heidelberg},
  address   = {Springer},
  isbn      = {3-540-00105-0},
  pages     = {105 -- 123},
  year      = {2004},
  language  = {en}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@article{GebeshuberKornauthDongetal.2013,
  author    = {Gebeshuber, Christoph A. and Kornauth, Christoph and Dong, Lihua and Sierig, Ralph and Seibler, Jost and Reiss, Martina and Tauber, Stefanie and Bilban, Martin and Wang, Shijun and Kain, Renate and B{\"o}hmig, Georg A. and Moeller, Marcus J. and Gr{\"o}ne, Hermann-Josef and Englert, Christoph and Martinez, Javier and Kerjaschki, Dontscho},
  title     = {Focal segmental glomerulosclerosis is induced by microRNA-193a and its downregulation of WT1},
  series = {Nature Medicine},
  volume    = {19},
  journal   = {Nature Medicine},
  number    = {4},
  issn      = {1078-8956},
  doi       = {10.1038/nm.3142},
  pages     = {481 -- 487},
  year      = {2013},
  language  = {en}
}
@article{GeMeyerSchoeningetal.2000,
  author    = {Ge, B. and Meyer, T. and Sch{\"o}ning, Michael Josef and Wollenberger, U. and Lisdat, F.,},
  title     = {Cytochrome c' from Chromatium vinosum on gold electrodes},
  series = {Electrochemistry Communications. 2 (2000), H. 8},
  journal   = {Electrochemistry Communications. 2 (2000), H. 8},
  isbn      = {1388-2481},
  pages     = {557 -- 561},
  year      = {2000},
  language  = {en}
}
@article{GazdaMaurischat2020,
  author    = {Gazda, Quentin and Maurischat, Andreas},
  title     = {Special functions and Gauss-Thakur sums in higher rank and dimension},
  publisher = {De Gruyter},
  address   = {Berlin},
  pages     = {26 Seiten},
  year      = {2020},
  language  = {en}
}
@article{GasparyanPoghossianVitusevichetal.2011,
  author    = {Gasparyan, Ferdinand V. and Poghossian, Arshak and Vitusevich, Svetlana A. and Petrychuk, Mykhaylo V. and Sydoruk, Viktor A. and Siqueira, Jos{\´e} R. Jr. and Oliveira, Osvaldo N. Jr. and Offenh{\"a}usser, Andreas and Sch{\"o}ning, Michael Josef},
  title     = {Low-Frequency Noise in Field-Effect Devices Functionalized With Dendrimer/Carbon-Nanotube Multilayers},
  series = {IEEE Sensors Journal. 11 (2011), H. 1},
  journal   = {IEEE Sensors Journal. 11 (2011), H. 1},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {1530-437X},
  pages     = {142 -- 149},
  year      = {2011},
  language  = {en}
}
@article{GasparyanVitusevichOffenhaeusseretal.2011,
  author    = {Gasparyan, F.V. and Vitusevich, S.A. and Offenh{\"a}usser, A. and Sch{\"o}ning, Michael Josef},
  title     = {Modified charge fluctuation noise model for electrolyte-insulator-semiconductor devices},
  series = {Modern Physics Letters B (MPLB). 25 (2011), H. 11},
  journal   = {Modern Physics Letters B (MPLB). 25 (2011), H. 11},
  publisher = {World Scientific Publ.},
  address   = {Singapur},
  isbn      = {0217-9849},
  pages     = {831 -- 840},
  year      = {2011},
  language  = {en}
}
@article{GasparyanPoghossianVitusevichetal.2009,
  author    = {Gasparyan, F. V. and Poghossian, Arshak and Vitusevich, S. A. and Petrychuk, M. V. and Sydoruk, V. A. and Surmalyan, A. V. and Siqueira, J. R. and Oliveira, O. N. and Offenh{\"a}usser, A. and Sch{\"o}ning, Michael Josef},
  title     = {Low Frequency Noise In Electrolyte-Gate Field-Effect Devices Functionalized With Dendrimer/Carbon-Nanotube Multilayers},
  series = {Noise and fluctuations : 20th International Conference on Noise and Fluctuations, ICNF 2009, Pisa, Italy, 14 - 19 June 2009 / ed. Massimo Macucci; Giovanni Basso},
  journal   = {Noise and fluctuations : 20th International Conference on Noise and Fluctuations, ICNF 2009, Pisa, Italy, 14 - 19 June 2009 / ed. Massimo Macucci; Giovanni Basso},
  publisher = {American Inst. of Physics},
  address   = {Melville, NY},
  isbn      = {9780735406650},
  pages     = {133 -- 136},
  year      = {2009},
  language  = {en}
}
@article{GaribaldiBegingCaneseetal.2017,
  author    = {Garibaldi, F. and Beging, Stefan and Canese, R. and Carpinelli, G. and Clinthorne, N. and Colilli, S. and Cosentino, L. and Finocchiaro, P. and Giuliani, F. and Gricia, M. and Lucentini, M. and Majewski, S. and Monno, E. and Musico, P. and Santavenere, F. and T{\"o}dter, J. and Wegener, Hans-Peter and Ziemons, Karl},
  title     = {A novel TOF-PET MRI detector for diagnosis and follow up of the prostate cancer},
  series = {European Physical Journal Plus},
  volume    = {132},
  journal   = {European Physical Journal Plus},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2190-5444},
  doi       = {10.1140/epjp/i2017-11662-x},
  year      = {2017},
  language  = {en}
}
@article{GarhoferBekBoehmetal.2010,
  author    = {Garhofer, Gerhard and Bek, Toke and Boehm, Andreas G. and Gherghel, Doina and Grundwald, Juan and Jeppesen, Peter and Kergoat, H{\´e}l{\`e}ne and Kotliar, Konstantin and Lanzl, Ines and Lovasik, John V. and Nagel, Edgar and Vilser, Walthard and Orgul, Selim and Schmetterer, Leopold},
  title     = {Use of the retinal vessel analyzer in ocular blood flow research},
  series = {Acta Ophthalmol},
  volume    = {88},
  journal   = {Acta Ophthalmol},
  number    = {7},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1755-3768},
  doi       = {10.1111/j.1755-3768.2009.01587.x},
  pages     = {717 -- 722},
  year      = {2010},
  abstract  = {The present article describes a standard instrument for the continuous online determination of retinal vessel diameters, the commercially available retinal vessel analyzer. This report is intended to provide informed guidelines for measuring ocular blood flow with this system. The report describes the principles underlying the method and the instruments currently available, and discusses clinical protocol and the specific parameters measured by the system. Unresolved questions and the possible limitations of the technique are also discussed.},
  language  = {en}
}
@inproceedings{GaoBabilonPfaffetal.2018,
  author    = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.},
  title     = {Model of wheel-rail contact for sanding and adhesion enhancement},
  series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  isbn      = {978-946186963-0},
  pages     = {314 -- 321},
  year      = {2018},
  language  = {en}
}
@inproceedings{GanegedaraAlahakoonMashfordetal.2012,
  author    = {Ganegedara, H. and Alahakoon, D. and Mashford, J. and Paplinski, A. and M{\"u}ller, Karsten and Deserno, T. M.},
  title     = {Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections},
  series = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  booktitle = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {IEEE Computational Intelligence Society (IEEE-CIS)},
  isbn      = {978-1-4673-1490-9},
  pages     = {8 S.},
  year      = {2012},
  language  = {en}
}
@misc{GamgamiCzupallaGarciaetal.2016,
  author    = {Gamgami, Farid and Czupalla, Markus and Garcia, Antonio and Agnolon, David},
  title     = {From planetary transits to spacecraft design: achieving PLATO's pointing performance},
  series = {A7. Symposium on technological Requirement for future space astronomy and solar-system science missions},
  journal   = {A7. Symposium on technological Requirement for future space astronomy and solar-system science missions},
  year      = {2016},
  abstract  = {In the last decades, several hundred exoplanets could be detected thanks to space-based observatories, namely CNES' COROT and NASA's Kepler. To expand this quest ESA plans to launch CHEOPS as the f irst small class mission in the cosmic visions program (S1) and PLATO as the 3rd medium class mission, so called M3 . PLATO's primary objective is the detection of Earth like Exoplanets orbiting solar type stars in the habitable zone and characterisation of their bulk properties. This is possible by precise lightcurve measurement via 34 cameras. That said it becomes obvious that accurate pointing is key to achieve the required signal to noise ratio for positive transit detection. The paper will start with a comprehensive overview of PLATO's mission objectives and mission architecture. Hereafter, special focus will be devoted to PLATO's pointing requirements. Understanding the very nature of PLATO's pointing requirements is essential to derive a design baseline to achieve the required performance. The PLATO frequency domain is of particular interest, ranging from 40 mHz to 3 Hz. Due to the very different time-scales involved, the spectral pointing requirement is decomposed into a high frequency part dominated by the attitude control system and the low frequency part dominated by the thermo-elastic properties of the spacecraft's configuration. Both pose stringent constraints on the overall design as well as technology properties to comply with the derived requirements and thus assure a successful mission.},
  language  = {en}
}
@article{GamellaZakharchenkoGuzetal.2017,
  author    = {Gamella, Maria and Zakharchenko, Andrey and Guz, Nataliia and Masi, Madeline and Minko, Sergiy and Kolpashchikov, Dmitry M. and Iken, Heiko and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Katz, Evgeny},
  title     = {DNA computing system activated by electrochemically triggered DNA realease from a polymer-brush-modified electrode array},
  series = {Electroanalysis},
  volume    = {29},
  journal   = {Electroanalysis},
  number    = {2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.201600389},
  pages     = {398 -- 408},
  year      = {2017},
  abstract  = {An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA-based Identity, AND and XOR logic gates. Single-stranded DNA molecules were loaded on the mixed poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA)/poly(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAEMA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at -1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.},
  language  = {en}
}
@inproceedings{GallAbelAhlbrinketal.2009,
  author    = {Gall, Jan and Abel, Dirk and Ahlbrink, Nils and Andersson, Joel A. E. and Diehl, Moritz and Pitz-Paal, Robert and Schmitz, Mark and Teixeira Boura, Cristiano Jos{\´e}},
  title     = {Optimized control of hot-gas cycle for solar thermal power plants},
  series = {Proceedings of the 7th International Modelica Conference : Como, Italy, 20-22 September 2009 / Francesco Casella, ed.},
  booktitle = {Proceedings of the 7th International Modelica Conference : Como, Italy, 20-22 September 2009 / Francesco Casella, ed.},
  publisher = {The Modelica Association},
  isbn      = {978-91-7393-513-5},
  pages     = {490 -- 495},
  year      = {2009},
  language  = {en}
}
@inproceedings{GallAbelAhlbrinketal.2010,
  author    = {Gall, Jan and Abel, Dirk and Ahlbrink, Nils and Pitz-Paal, Robert and Andersson, Joel A. E. and Diehl, M. and Teixeira Boura, Cristiano Jos{\´e} and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {Simulation and control of solar thermal power plants},
  series = {International Conference on Renewable Energies and Power Quality : ICREPQ '10 : Granada 23rd - 25th March 2010},
  booktitle = {International Conference on Renewable Energies and Power Quality : ICREPQ '10 : Granada 23rd - 25th March 2010},
  pages     = {1 -- 5},
  year      = {2010},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2017,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Videos versus still images: Asymmetric sensor pattern noise comparison on mobile phones},
  series = {Electronic Imaging},
  booktitle = {Electronic Imaging},
  publisher = {Society for Imaging Science and Technology},
  address   = {Springfield, Virginia},
  issn      = {2470-1173},
  doi       = {10.2352/ISSN.2470-1173.2017.7.MWSF-331},
  pages     = {100 -- 103},
  year      = {2017},
  abstract  = {Nowadays, the most employed devices for recoding videos or capturing images are undoubtedly the smartphones. Our work investigates the application of source camera identification on mobile phones. We present a dataset entirely collected by mobile phones. The dataset contains both still images and videos collected by 67 different smartphones. Part of the images consists in photos of uniform backgrounds, especially collected for the computation of the RSPN. Identifying the source camera given a video is particularly challenging due to the strong video compression. The experiments reported in this paper, show the large variation in performance when testing an highly accurate technique on still images and videos.},
  language  = {en}
}
@article{GaigallGerstenbergTrinh2022,
  author    = {Gaigall, Daniel and Gerstenberg, Julian and Trinh, Thi Thu Ha},
  title     = {Empirical process of concomitants for partly categorial data and applications in statistics},
  series = {Bernoulli},
  volume    = {28},
  journal   = {Bernoulli},
  number    = {2},
  publisher = {International Statistical Institute},
  address   = {Den Haag, NL},
  issn      = {1573-9759},
  doi       = {10.3150/21-BEJ1367},
  pages     = {803 -- 829},
  year      = {2022},
  abstract  = {On the basis of independent and identically distributed bivariate random vectors, where the components are categorial and continuous variables, respectively, the related concomitants, also called induced order statistic, are considered. The main theoretical result is a functional central limit theorem for the empirical process of the concomitants in a triangular array setting. A natural application is hypothesis testing. An independence test and a two-sample test are investigated in detail. The fairly general setting enables limit results under local alternatives and bootstrap samples. For the comparison with existing tests from the literature simulation studies are conducted. The empirical results obtained confirm the theoretical findings.},
  language  = {en}
}
@article{GaigallGerstenberg2023,
  author    = {Gaigall, Daniel and Gerstenberg, Julian},
  title     = {Cram{\´e}r-von-Mises tests for the distribution of the excess over a confidence level},
  series = {Journal of Nonparametric Statistics},
  journal   = {Journal of Nonparametric Statistics},
  publisher = {Taylor \& Francis},
  issn      = {1048-5252 (Print)},
  doi       = {10.1080/10485252.2023.2173958},
  year      = {2023},
  abstract  = {The Cram{\´e}r-von-Mises distance is applied to the distribution of the excess over a confidence level. Asymptotics of related statistics are investigated, and it is seen that the obtained limit distributions differ from the classical ones. For that reason, quantiles of the new limit distributions are given and new bootstrap techniques for approximation purposes are introduced and justified. The results motivate new one-sample goodness-of-fit tests for the distribution of the excess over a confidence level and a new confidence interval for the related fitting error. Simulation studies investigate size and power of the tests as well as coverage probabilities of the confidence interval in the finite sample case. A practice-oriented application of the Cram{\´e}r-von-Mises tests is the determination of an appropriate confidence level for the fitting approach. The adoption of the idea to the well-known problem of threshold detection in the context of peaks over threshold modelling is sketched and illustrated by data examples.},
  language  = {en}
}
@phdthesis{Gaigall2023,
  author    = {Gaigall, Daniel},
  title     = {On selected problems in multivariate analysis},
  doi       = {10.15488/14304},
  pages     = {17 Seiten},
  year      = {2023},
  abstract  = {Selected problems in the field of multivariate statistical analysis are treated. Thereby, one focus is on the paired sample case. Among other things, statistical testing problems of marginal homogeneity are under consideration. In detail, properties of Hotelling's T² test in a special parametric situation are obtained. Moreover, the nonparametric problem of marginal homogeneity is discussed on the basis of possibly incomplete data. In the bivariate data case, properties of the Hoeffding-Blum-Kiefer-Rosenblatt independence test statistic on the basis of partly not identically distributed data are investigated. Similar testing problems are treated within the scope of the application of a result for the empirical process of the concomitants for partly categorial data. Furthermore, testing changes in the modeled solvency capital requirement of an insurance company by means of a paired sample from an internal risk model is discussed. Beyond the paired sample case, a new asymptotic relative efficiency concept based on the expected volumes of multidimensional confidence regions is introduced. Besides, a new approach for the treatment of the multi-sample goodness-of-fit problem is presented. Finally, a consistent test for the treatment of the goodness-of-fit problem is developed for the background of huge or infinite dimensional data.},
  language  = {en}
}
@article{Gaigall2023,
  author    = {Gaigall, Daniel},
  title     = {Allocating and forecasting changes in risk},
  series = {Journal of risk},
  volume    = {25},
  journal   = {Journal of risk},
  number    = {3},
  editor    = {AitSahlia, Farid},
  publisher = {Infopro Digital Risk},
  address   = {London},
  issn      = {1755-2842},
  doi       = {10.21314/JOR.2022.048},
  pages     = {1 -- 24},
  year      = {2023},
  abstract  = {We consider time-dependent portfolios and discuss the allocation of changes in the risk of a portfolio to changes in the portfolio's components. For this purpose we adopt established allocation principles. We also use our approach to obtain forecasts for changes in the risk of the portfolio's components. To put the approach into practice we present an implementation based on the output of a simulation. Allocation is illustrated with an example portfolio in the context of Solvency II. The quality of the forecasts is investigated with an empirical study.},
  language  = {en}
}
@article{Gaigall2023,
  author    = {Gaigall, Daniel},
  title     = {On the applicability of several tests to models with not identically distributed random effects},
  series = {Statistics : A Journal of Theoretical and Applied Statistics},
  volume    = {57},
  journal   = {Statistics : A Journal of Theoretical and Applied Statistics},
  publisher = {Taylor \& Francis},
  address   = {London},
  isbn      = {0323-3944},
  issn      = {1029-4910},
  doi       = {10.1080/02331888.2023.2193748},
  pages     = {14 Seiten},
  year      = {2023},
  abstract  = {We consider Kolmogorov-Smirnov and Cram{\´e}r-von-Mises type tests for testing central symmetry, exchangeability, and independence. In the standard case, the tests are intended for the application to independent and identically distributed data with unknown distribution. The tests are available for multivariate data and bootstrap procedures are suitable to obtain critical values. We discuss the applicability of the tests to random effects models, where the random effects are independent but not necessarily identically distributed and with possibly unknown distributions. Theoretical results show the adequacy of the tests in this situation. The quality of the tests in models with random effects is investigated by simulations. Empirical results obtained confirm the theoretical findings. A real data example illustrates the application.},
  language  = {en}
}
@inproceedings{Gaigall2022,
  author    = {Gaigall, Daniel},
  title     = {On Consistent Hypothesis Testing In General Hilbert Spaces},
  series = {Proceedings of the 4th International Conference on Statistics: Theory and Applications (ICSTA'22)},
  booktitle = {Proceedings of the 4th International Conference on Statistics: Theory and Applications (ICSTA'22)},
  publisher = {Avestia Publishing},
  address   = {Orl{\´e}ans, Kanada},
  doi       = {10.11159/icsta22.157},
  pages     = {Paper No. 157},
  year      = {2022},
  abstract  = {Inference on the basis of high-dimensional and functional data are two topics which are discussed frequently in the current statistical literature. A possibility to include both topics in a single approach is working on a very general space for the underlying observations, such as a separable Hilbert space. We propose a general method for consistently hypothesis testing on the basis of random variables with values in separable Hilbert spaces. We avoid concerns with the curse of dimensionality due to a projection idea. We apply well-known test statistics from nonparametric inference to the projected data and integrate over all projections from a specific set and with respect to suitable probability measures. In contrast to classical methods, which are applicable for real-valued random variables or random vectors of dimensions lower than the sample size, the tests can be applied to random vectors of dimensions larger than the sample size or even to functional and high-dimensional data. In general, resampling procedures such as bootstrap or permutation are suitable to determine critical values. The idea can be extended to the case of incomplete observations. Moreover, we develop an efficient algorithm for implementing the method. Examples are given for testing goodness-of-fit in a one-sample situation in [1] or for testing marginal homogeneity on the basis of a paired sample in [2]. Here, the test statistics in use can be seen as generalizations of the well-known Cram{\´e}rvon-Mises test statistics in the one-sample and two-samples case. The treatment of other testing problems is possible as well. By using the theory of U-statistics, for instance, asymptotic null distributions of the test statistics are obtained as the sample size tends to infinity. Standard continuity assumptions ensure the asymptotic exactness of the tests under the null hypothesis and that the tests detect any alternative in the limit. Simulation studies demonstrate size and power of the tests in the finite sample case, confirm the theoretical findings, and are used for the comparison with concurring procedures. A possible application of the general approach is inference for stock market returns, also in high data frequencies. In the field of empirical finance, statistical inference of stock market prices usually takes place on the basis of related log-returns as data. In the classical models for stock prices, i.e., the exponential L{\´e}vy model, Black-Scholes model, and Merton model, properties such as independence and stationarity of the increments ensure an independent and identically structure of the data. Specific trends during certain periods of the stock price processes can cause complications in this regard. In fact, our approach can compensate those effects by the treatment of the log-returns as random vectors or even as functional data.},
  language  = {en}
}
@article{Gaigall2020,
  author    = {Gaigall, Daniel},
  title     = {Rothman-Woodroofe symmetry test statistic revisited},
  series = {Computational Statistics \& Data Analysis},
  volume    = {2020},
  journal   = {Computational Statistics \& Data Analysis},
  number    = {142},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-9473},
  doi       = {10.1016/j.csda.2019.106837},
  pages     = {Artikel 106837},
  year      = {2020},
  abstract  = {The Rothman-Woodroofe symmetry test statistic is revisited on the basis of independent but not necessarily identically distributed random variables. The distribution-freeness if the underlying distributions are all symmetric and continuous is obtained. The results are applied for testing symmetry in a meta-analysis random effects model. The consistency of the procedure is discussed in this situation as well. A comparison with an alternative proposal from the literature is conducted via simulations. Real data are analyzed to demonstrate how the new approach works in practice.},
  language  = {en}
}
@article{Gaigall2021,
  author    = {Gaigall, Daniel},
  title     = {Test for Changes in the Modeled Solvency Capital Requirement of an Internal Risk Model},
  series = {ASTIN Bulletin},
  volume    = {51},
  journal   = {ASTIN Bulletin},
  number    = {3},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  issn      = {1783-1350},
  doi       = {10.1017/asb.2021.20},
  pages     = {813 -- 837},
  year      = {2021},
  abstract  = {In the context of the Solvency II directive, the operation of an internal risk model is a possible way for risk assessment and for the determination of the solvency capital requirement of an insurance company in the European Union. A Monte Carlo procedure is customary to generate a model output. To be compliant with the directive, validation of the internal risk model is conducted on the basis of the model output. For this purpose, we suggest a new test for checking whether there is a significant change in the modeled solvency capital requirement. Asymptotic properties of the test statistic are investigated and a bootstrap approximation is justified. A simulation study investigates the performance of the test in the finite sample case and confirms the theoretical results. The internal risk model and the application of the test is illustrated in a simplified example. The method has more general usage for inference of a broad class of law-invariant and coherent risk measures on the basis of a paired sample.},
  language  = {en}
}
@article{Gaigall2020,
  author    = {Gaigall, Daniel},
  title     = {Hoeffding-Blum-Kiefer-Rosenblatt independence test statistic on partly not identically distributed data},
  series = {Communications in Statistics - Theory and Methods},
  volume    = {51},
  journal   = {Communications in Statistics - Theory and Methods},
  number    = {12},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1532-415X},
  doi       = {10.1080/03610926.2020.1805767},
  pages     = {4006 -- 4028},
  year      = {2020},
  abstract  = {The established Hoeffding-Blum-Kiefer-Rosenblatt independence test statistic is investigated for partly not identically distributed data. Surprisingly, it turns out that the statistic has the well-known distribution-free limiting null distribution of the classical criterion under standard regularity conditions. An application is testing goodness-of-fit for the regression function in a non parametric random effects meta-regression model, where the consistency is obtained as well. Simulations investigate size and power of the approach for small and moderate sample sizes. A real data example based on clinical trials illustrates how the test can be used in applications.},
  language  = {en}
}
@article{Gaigall2020,
  author    = {Gaigall, Daniel},
  title     = {Testing marginal homogeneity of a continuous bivariate distribution with possibly incomplete paired data},
  series = {Metrika},
  volume    = {2020},
  journal   = {Metrika},
  number    = {83},
  publisher = {Springer},
  issn      = {1435-926X},
  doi       = {10.1007/s00184-019-00742-5},
  pages     = {437 -- 465},
  year      = {2020},
  abstract  = {We discuss the testing problem of homogeneity of the marginal distributions of a continuous bivariate distribution based on a paired sample with possibly missing components (missing completely at random). Applying the well-known two-sample Cr{\´a}mer-von-Mises distance to the remaining data, we determine the limiting null distribution of our test statistic in this situation. It is seen that a new resampling approach is appropriate for the approximation of the unknown null distribution. We prove that the resulting test asymptotically reaches the significance level and is consistent. Properties of the test under local alternatives are pointed out as well. Simulations investigate the quality of the approximation and the power of the new approach in the finite sample case. As an illustration we apply the test to real data sets.},
  language  = {en}
}
@article{Gaigall2019,
  author    = {Gaigall, Daniel},
  title     = {On a new approach to the multi-sample goodness-of-fit problem},
  series = {Communications in Statistics - Simulation and Computation},
  volume    = {53},
  journal   = {Communications in Statistics - Simulation and Computation},
  number    = {10},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1532-4141},
  doi       = {10.1080/03610918.2019.1618472},
  pages     = {2971 -- 2989},
  year      = {2019},
  abstract  = {Suppose we have k samples X₁,₁,…,X₁,ₙ₁,…,Xₖ,₁,…,Xₖ,ₙₖ with different sample sizes ₙ₁,…,ₙₖ and unknown underlying distribution functions F₁,…,Fₖ as observations plus k families of distribution functions {G₁(⋅,ϑ);ϑ∈Θ},…,{Gₖ(⋅,ϑ);ϑ∈Θ}, each indexed by elements ϑ from the same parameter set Θ, we consider the new goodness-of-fit problem whether or not (F₁,…,Fₖ) belongs to the parametric family {(G₁(⋅,ϑ),…,Gₖ(⋅,ϑ));ϑ∈Θ}. New test statistics are presented and a parametric bootstrap procedure for the approximation of the unknown null distributions is discussed. Under regularity assumptions, it is proved that the approximation works asymptotically, and the limiting distributions of the test statistics in the null hypothesis case are determined. Simulation studies investigate the quality of the new approach for small and moderate sample sizes. Applications to real-data sets illustrate how the idea can be used for verifying model assumptions.},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@article{FoersterZettlerMikkelsenetal.1992,
  author    = {F{\"o}rster, Arnold and Zettler, J.-T. and Mikkelsen, H. and Leo, K.},
  title     = {Modulated ellipsometric measurements and transfer-matrix calculation of the field-dependent dielectric function of a multiple quantum well / J.-Th. Zettler ; H. Mikkelsen ; K. Leo ... A. F{\"o}rster},
  series = {Physical Review B . 46 (1992), H. 24},
  journal   = {Physical Review B . 46 (1992), H. 24},
  isbn      = {0163-1829},
  pages     = {15955 -- 15962},
  year      = {1992},
  language  = {en}
}
@article{FoersterZamdmerHuetal.1999,
  author    = {F{\"o}rster, Arnold and Zamdmer, N. and Hu, Qing and Verghese, S.},
  title     = {Mode-Discriminating Photoconductor and Coplanar Wave-Guide Circuits for Picosecond Sampling. Zamdmer, N.; Hu, Qing ; Verghese, S. ; F{\"o}rster, A.},
  series = {Applied Physics Letters. 74 (1999), H. 7},
  journal   = {Applied Physics Letters. 74 (1999), H. 7},
  isbn      = {1077-3118},
  pages     = {1039 -- 1041},
  year      = {1999},
  language  = {en}
}