@incollection{MuellerVeggianKopsQuinetal.2007,
  author    = {M{\"u}ller-Veggian, Mattea and Kops, Elena Rota and Quin, Peng and Herzog, Hans},
  title     = {MRI Based Attenuation Correction for Brain PET Images},
  series = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  booktitle = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68763-4},
  doi       = {10.1007/978-3-540-68764-1_15},
  pages     = {93 -- 97},
  year      = {2007},
  abstract  = {This work describes a procedure to yield attenuation maps from MR images which are used for the absorption correction (AC) of brain PET data. Such an approach could be mandatory for future combined PET and MRI scanners, which probably do not include a transmission facility. T1-weighted MR images were segmented into brain tissue, bone, soft tissue, and sinus; attenuation coefficients corresponding to elemental composition and density as well as to 511 keV photon energy were respectively assigned. Attenuation maps containing up to four compartments were created and forward projected into sinograms with attenuation factors which then were used for AC during reconstruction of FDG-PET data. The commonly used AC based on a radioactive (68Ge) transmission scan served as reference. The reconstructed radioactivity values obtained with the MRI-based AC were about 20\% lower than those obtained with PET-based AC if the skull was not taken into account. Considering the skull the difference was still about 10\%. Our investigations demonstrate the feasibility of a MRI-based AC, but revealed also the necessity of a satisfying delineation of bone thickness which tends to be underestimated in our first approach of T1-weighted MR image segmentation.},
  language  = {en}
}
@incollection{MuellerAltherrAholaetal.2018,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.},
  title     = {Optimizing pressure screen systems in paper recycling: optimal system layout, component selection and operation},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5},
  doi       = {10.1007/978-3-030-18500-8_44},
  pages     = {355 -- 361},
  year      = {2018},
  abstract  = {Around 60\% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.},
  language  = {en}
}
@incollection{MufflerTippkoetterUlber2010,
  author    = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Chemical feedstocks and fine chemicals from other substrates},
  series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)},
  editor    = {Timmis, Kenneth N.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-77588-1},
  doi       = {10.1007\%2F978-3-540-77587-4_214},
  pages     = {2891 -- 2902},
  year      = {2010},
  language  = {en}
}
@incollection{MufflerPothSiekeretal.2011,
  author    = {Muffler, Kai and Poth, Sabastian and Sieker, Tim and Tippk{\"o}tter, Nils and Ulber, Roland and Sell, Dieter},
  title     = {Bio-feedstocks},
  series = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  booktitle = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  editor    = {Moo-Young, Murray},
  edition   = {2. edition},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-444-53352-4},
  doi       = {10.1016/B978-0-08-088504-9.00088-X},
  pages     = {93 -- 101},
  year      = {2011},
  language  = {en}
}
@incollection{MuellerJungSchmoelzer2015,
  author    = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard},
  title     = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen},
  series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  editor    = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang},
  publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  address   = {Innsbruck},
  isbn      = {978-3-9501312-5-3},
  pages     = {173 -- 190},
  year      = {2015},
  language  = {de}
}
@incollection{MottaghyMajorowiczRath2009,
  author    = {Mottaghy, Darius and Majorowicz, Jacek and Rath, Volker},
  title     = {Ground Surface Temperature Histories Reconstructed from Boreholes in Poland: Implications for Spatial Variability},
  series = {The Polish Climate in the European Context: An Historical Overview},
  booktitle = {The Polish Climate in the European Context: An Historical Overview},
  publisher = {Springer Science+Business Media},
  address   = {Dordrecht},
  isbn      = {978-90-481-3167-9},
  doi       = {10.1007/978-90-481-3167-9_17},
  pages     = {375 -- 387},
  year      = {2009},
  language  = {en}
}
@incollection{MoorkampPetersonUibel2023,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Standardholzbr{\"u}cken f{\"u}r kommunale Geh- und Radwege},
  series = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  booktitle = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  editor    = {Wehren, Cedric},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-95886-500-6},
  pages     = {140 -- 165},
  year      = {2023},
  language  = {de}
}
@incollection{MoorkampPetersonUibel2022,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Nachhaltige Holzbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  booktitle = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  editor    = {Fouad, Nabil A.},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {9783433033609 (Print)},
  doi       = {10.1002/9783433611081.ch17},
  pages     = {574 -- 592},
  year      = {2022},
  abstract  = {Am Lehr- und Forschungsgebiet Holzbau der Fachhochschule Aachen wurden im Rahmen des Forschungsvorhabens „Nachhaltige Standardbr{\"u}cken in Holzbauweise" Standardtypen f{\"u}r Geh- und Radwegbr{\"u}cken entwickelt. Die Br{\"u}cken sind durch konsequente Umsetzungen von Maßnahmen des konstruktiven Holzschutzes f{\"u}r eine Nutzung von mehr als 80~Jahren konzipiert. Innovative L{\"o}sungen f{\"u}r Bauteile und Anschl{\"u}sse sowie Materialalternativen im Bereich des Belages und der Gel{\"a}nder erm{\"o}glichen eine wartungsarme Konstruktion und tragen somit zur Wirtschaftlichkeit und Nachhaltigkeit bei. Um den Einsatz der entwickelten Standardbr{\"u}ckentypen in der Praxis zu erleichtern, wurden Leistungsverzeichnisse, Musterstatiken, Musterzeichnungen und umfangreiche Detailkataloge als Unterst{\"u}tzung f{\"u}r Planer und Bauherren erstellt. Damit die Randbedingungen f{\"u}r eine lange Lebensdauer w{\"a}hrend der Nutzung der Br{\"u}cke erhalten bleiben, wurden Leitf{\"a}den f{\"u}r die Pflege und Wartung sowie f{\"u}r die Br{\"u}ckenpr{\"u}fung erarbeitet. Der Beitrag gibt Einblicke in das Forschungsvorhaben und seine Resultate.},
  language  = {de}
}
@incollection{MichelsBorchert2009,
  author    = {Michels, A. and Borchert, J{\"o}rg},
  title     = {Beschaffungsstrategien an der Schnittstelle Energiehandel/Vertrieb},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  edition   = {2. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-58373-5},
  pages     = {467 -- 481},
  year      = {2009},
  language  = {de}
}
@incollection{MeskourisNordaButenweg2011,
  author    = {Meskouris, Konstantin and Norda, Hannah and Butenweg, Christoph},
  title     = {Aktuelle Nachweiskonzepte von Mauerwerk unter Erdbebenbeanspruchung},
  series = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)},
  booktitle = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)},
  publisher = {Techn. Univ., Lehrstuhl Tragwerksplanung},
  address   = {Dresden},
  isbn      = {978-3-86780-216-1},
  pages     = {233 -- 238},
  year      = {2011},
  language  = {de}
}
@incollection{MeskourisHoltschoppenButenwegetal.2010,
  author    = {Meskouris, Konstantin and Holtschoppen, Britta and Butenweg, Christoph and Park, Jin},
  title     = {Seismische Auslegung von Silo- und Tankbauwerken},
  series = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  booktitle = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  publisher = {Univ. der Bundeswehr},
  address   = {Neubiberg},
  pages     = {215 -- 224},
  year      = {2010},
  language  = {de}
}
@incollection{MeskourisGellertButenweg2010,
  author    = {Meskouris, Konstantin and Gellert, Christoph and Butenweg, Christoph},
  title     = {Neuer Ansatz f{\"u}r die Bemessung von Mauerwerksbauten},
  series = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke},
  booktitle = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke},
  publisher = {Bauhaus-Univ. Weimar},
  address   = {Weimar},
  pages     = {217 -- 224},
  year      = {2010},
  language  = {de}
}
@incollection{MeskourisButenwegKalkeretal.2007,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Kalker, Ines and Mistler, Michael},
  title     = {Numerical simulation of historic masonry buildings},
  series = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  booktitle = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  publisher = {Franz Steiner Verlag},
  address   = {Stuttgart},
  isbn      = {978-3-515-09030-8 ; 3-515-09030-4},
  pages     = {171 -- 189},
  year      = {2007},
  language  = {en}
}
@incollection{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_3},
  pages     = {153 -- 196},
  year      = {2019},
  abstract  = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.},
  language  = {en}
}
@incollection{MeskourisButenweg2008,
  author    = {Meskouris, Konstantin and Butenweg, Christoph},
  title     = {Erdbebensichere Auslegung von Bauwerken nach DIN 4149:2005},
  series = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2},
  booktitle = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {978-3-433-01839-2 (Print) ; 978-3-433-01854-5 (E-Book)},
  doi       = {10.1002/9783433600702.ch5},
  pages     = {1 -- 54},
  year      = {2008},
  language  = {de}
}
@incollection{MertensBecker1989,
  author    = {Mertens, Josef and Becker, K.},
  title     = {Numerical solution of flow equations : an aircraft designer's view},
  series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  editor    = {Ballmann, Josef},
  publisher = {Vieweg},
  address   = {Braunschweig},
  isbn      = {3-528-08098-1},
  doi       = {10.1007/978-3-322-87869-4_41},
  pages     = {403 -- 412},
  year      = {1989},
  abstract  = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Required aerodynamic technologies},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_5},
  pages     = {69 -- 96},
  year      = {1997},
  abstract  = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Supersonic laminar flow},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_18},
  pages     = {275 -- 290},
  year      = {1997},
  abstract  = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Son of Concorde, a technology challenge},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_3},
  pages     = {31 -- 51},
  year      = {1997},
  abstract  = {Concorde (Figure 9) is the only supersonic airliner which has been introduced into regular passenger service. It is still in service at British Airways and Air France without any flight accidents, and probably will stay in service for at least for ten more years.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Reduction of aerodynamic drag (RaWid)-Status after the first year of the program},
  series = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  booktitle = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-06960-0},
  doi       = {10.1007/978-3-322-86573-1_2},
  pages     = {7 -- 14},
  year      = {1997},
  abstract  = {The technology programme "Reduction of aerodynamic drag (RaWid)" for high speed aerodynamics at Daimler-Benz Aerospace Airbus is sponsered by the German ministry for education, research and technology since July 1, 1995. Connected to this industrial programme are the cooperation programmes "MEGAFLOW" under leadership of the DLR and "Transition" by the DFG, and several contributions by DLR and universities. The programme is oriented towards technologies required for a MEGALINER which gains momentum by the ambitious plans for a new large Airbus A3XX. In the first year new technological steps were undertaken in theory, design and experiment. Some critical steps were verified by wing designs checked in wind tunnel tests.},
  language  = {en}
}
@incollection{MelznerFerger2024,
  author    = {Melzner, J{\"u}rgen and Ferger, Martin},
  title     = {Building Information Modeling},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_15},
  pages     = {1051 -- 1073},
  year      = {2024},
  abstract  = {Durch die Einf{\"u}hrung von Building Information Modeling (BIM) sowohl projektspezifisch als auch in ganze Unternehmungen hat die Baubranche einen weitreichenden Ver{\"a}nderungsprozess angestoßen. Building Information Modeling kann als eine Methode angesehen werden, um die Informationsasymmetrien zwischen den Projektbeteiligten so gering wie m{\"o}glich zu halten.},
  language  = {de}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Berechnung von Sonnenstand und -strahlung},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_2},
  pages     = {5 -- 22},
  year      = {1997},
  language  = {de}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Auslegung von solarthermischen Anlagen},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_3},
  pages     = {23 -- 47},
  year      = {1997},
  language  = {de}
}
@incollection{Meliss1990,
  author    = {Meliß, Michael},
  title     = {Trends und Schwerpunkte bei der Entwicklung regenerativer Energietr{\"a}ger},
  series = {Technische Perspektiven und gesellschaftliche Entwicklungen : Trends und Schwerpunkte der Forschung in der Bundesrepublik Deutschland / Ulrich Widmaier; Thomas K{\"o}nig (Hrsg.). - (Studien zur gesellschaftlichen Entwicklung ; 1)},
  booktitle = {Technische Perspektiven und gesellschaftliche Entwicklungen : Trends und Schwerpunkte der Forschung in der Bundesrepublik Deutschland / Ulrich Widmaier; Thomas K{\"o}nig (Hrsg.). - (Studien zur gesellschaftlichen Entwicklung ; 1)},
  publisher = {Nomos-Verl.-Ges.},
  address   = {Baden-Baden},
  isbn      = {3-7890-1891-0},
  pages     = {279 -- 306},
  year      = {1990},
  language  = {de}
}
@incollection{Meliss1998,
  author    = {Meliß, Michael},
  title     = {Regenerative Energietr{\"a}ger},
  series = {Lexikon der Bioethik / hrsg. im Auftr. der G{\"o}rres-Gesellschaft von Wilhelm Korff. Bd. 3},
  booktitle = {Lexikon der Bioethik / hrsg. im Auftr. der G{\"o}rres-Gesellschaft von Wilhelm Korff. Bd. 3},
  publisher = {G{\"u}tersloher Verlagshaus},
  address   = {G{\"u}tersloh},
  pages     = {168 -- 175},
  year      = {1998},
  language  = {de}
}
@incollection{Meliss1994,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Energie - Technik - Umwelt : Festschrift : Herrn Professor Dr.-Ing. Hermann Unger zum 60. Geburtstag gewidmete Arbeiten / Ruhr-Universit{\"a}t Bochum, [Institut f{\"u}r Energietechnik], Lehrstuhl f{\"u}r Nukleare und Neue Energiesysteme. Hrsg.: U. Brockmeier},
  booktitle = {Energie - Technik - Umwelt : Festschrift : Herrn Professor Dr.-Ing. Hermann Unger zum 60. Geburtstag gewidmete Arbeiten / Ruhr-Universit{\"a}t Bochum, [Institut f{\"u}r Energietechnik], Lehrstuhl f{\"u}r Nukleare und Neue Energiesysteme. Hrsg.: U. Brockmeier},
  publisher = {Ruhr-Universit{\"a}t Bochum},
  address   = {Bochum},
  pages     = {287 -- 298},
  year      = {1994},
  language  = {de}
}
@incollection{MedlinBarkerBaumannetal.1994,
  author    = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.},
  title     = {Molecular biology and systematics},
  series = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-857772-9},
  pages     = {393 -- 411},
  year      = {1994},
  language  = {en}
}
@incollection{McInnesBothmerDachwaldetal.2014,
  author    = {McInnes, Colin R. and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter},
  title     = {Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  pages     = {227 -- 242},
  year      = {2014},
  abstract  = {A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.},
  language  = {en}
}
@incollection{Mayer2013,
  author    = {Mayer, Claudia},
  title     = {Innovation und Kommunikation},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {145 -- 149},
  year      = {2013},
  language  = {de}
}
@incollection{MatchaKarzelPahl2013,
  author    = {Matcha, Heike and Karzel, R{\"u}diger and Pahl, Katja-Annika},
  title     = {Lehre als Praxis als Forschung: 1:1 Entwicklung von Messest{\"a}nden unter Einsatz parametrisierter Software und computergesteuerter Herstellung},
  series = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung},
  booktitle = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung},
  publisher = {TUDpress - Verlag der Wissenschaften},
  address   = {Dresden},
  isbn      = {978-3-94433111-9},
  pages     = {95 -- 108},
  year      = {2013},
  language  = {de}
}
@incollection{MatchaBarczikAgkathidis2009,
  author    = {Matcha, Heike and Barczik, G{\"u}nter and Agkathidis, Asterios},
  title     = {Produktive Prozesse: Mehr Vielfalt, Komplexit{\"a}t und Kreativit{\"a}t im Entwerfen mittels parametrisierter generativer Algorithmen},
  series = {Modulare Strukturen in Entwurf und Architektur},
  booktitle = {Modulare Strukturen in Entwurf und Architektur},
  publisher = {BIS-Publishers},
  address   = {Amsterdam},
  isbn      = {978-90-6369-208-7},
  pages     = {126 -- 130},
  year      = {2009},
  language  = {de}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Ed. Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-920034-35-5},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-95553-022-8},
  doi       = {10.11129/detail.9783955530228},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@incollection{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Vom Industriellen Bauen zu parametrischen Planungsprozessen},
  series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  pages     = {12 -- 13},
  year      = {2007},
  language  = {de}
}
@incollection{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Parametrischer Geb{\"a}udeentwurf},
  series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  pages     = {14 -- 15},
  year      = {2007},
  language  = {de}
}
@incollection{MartinMartin2016,
  author    = {Martin, Joachim and Martin, Angelika},
  title     = {Gr{\"o}ßen, Formeln, Bemessung},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  edition   = {9., {\"u}berarb. und aktual. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02838-1 (Online)},
  doi       = {10.1007/978-3-658-02838-1_1},
  pages     = {1 -- 61},
  year      = {2016},
  abstract  = {Das Kapitel 1 vermittelt eine {\"U}bersicht f{\"u}r den schnellen Gebrauch von Gr{\"o}ßen, Einheiten und Zeichen. Es folgt die Darstellung wichtiger Grundlagen der Mathematik, Lastannahmen und einfacher statischer Systeme. Schließlich werden Hinweise zu charakteristischen Festigkeiten und Tragf{\"a}higkeitsnachweisen f{\"u}r Berechnungen im Mauerwerk, Holz- und Stahlbau sowie Stahlbetonbau gegeben. F{\"u}r eine weitere Vertiefung des Themas empfiehlt sich der Wendehorst Bautechnische Zahlentafel},
  language  = {de}
}
@incollection{Martin2016,
  author    = {Martin, Joachim},
  title     = {Betriebsorganisation},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  edition   = {9., {\"u}berarb. und aktual. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02838-1 (Online)},
  doi       = {10.1007/978-3-658-02838-1_12},
  pages     = {1297 -- 1389},
  year      = {2016},
  abstract  = {Das Kapitel behandelt, ausgehend von Begriffen und Aufgaben der Betriebsorganisation, die Aufbau- und Ablauforganisation der Bauunternehmung sowie die Gestaltung einer Projekt-organisation. Es folgt eine Darstellung der Managementsysteme f{\"u}r Qualit{\"a}t, Umwelt und Arbeitsschutz, die sich zunehmend als sog. integrierte Managementsysteme (IMS) auch in Bauunternehmen etablieren. Grundlagen des Personalmanagements und des betrieblichen Rechnungswesens, die f{\"u}r eine(n) Baubetriebler(in) relevant sein k{\"o}nnen, erg{\"a}nzen das Kap. Betriebsorganisation. Den Abschluss bilden Hinweise zum Berichtswesen der Baustelle.},
  language  = {de}
}
@incollection{Martin2019,
  author    = {Martin, Joachim},
  title     = {Bemessung von Baukonstruktionen},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_1},
  pages     = {1 -- 11},
  year      = {2019},
  language  = {de}
}
@incollection{Martin2019,
  author    = {Martin, Joachim},
  title     = {Betriebsorganisation},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_10},
  pages     = {255 -- 272},
  year      = {2019},
  language  = {de}
}
@incollection{MansurovJandosovChenchiketal.2020,
  author    = {Mansurov, Zulkhair A. and Jandosov, Jakpar and Chenchik, D. and Azat, Seitkhan and Savitskaya, Irina S. and Kistaubaeva, Aida and Akimbekov, Nuraly and Digel, Ilya and Zhubanova, Azhar Achmet},
  title     = {Biocomposite Materials Based on Carbonized Rice Husk in Biomedicine and Environmental Applications},
  series = {Carbon Nanomaterials in Biomedicine and the Environment},
  booktitle = {Carbon Nanomaterials in Biomedicine and the Environment},
  publisher = {Jenny Stanford Publishing Pte. Ltd.},
  address   = {Singapore},
  isbn      = {978-981-4800-27-3},
  doi       = {10.1201/9780429428647-2},
  pages     = {3 -- 32},
  year      = {2020},
  abstract  = {This chapter describes the prospects for biomedical and environmental engineering applications of heterogeneous materials based on nanostructured carbonized rice husk. Efforts in engineering enzymology are focused on the following directions: development and optimization of immobilization methods leading to novel biotechnological and biomedical applications; construction of biocomposite materials based on individual enzymes, multi-enzyme complexes and whole cells, targeted on realization of specific industrial processes. Molecular biological and biochemical studies on cell adhesion focus predominantly on identification, isolation and structural analysis of attachment-responsible biological molecules and their genetic determinants. The chapter provides a short overview of applications of the biocomposite materials based of nanostructured carbonized adsorbents. It emphasizes that further studies and better understanding of the interactions between CNS and microbial cells are necessary. The future use of living cells as biocatalysts, especially in the environmental field, needs more systematic investigations of the microbial adsorption phenomenon.},
  language  = {en}
}
@incollection{MandelartzTeschersSchumacher2003,
  author    = {Mandelartz, Johannes and Teschers, Reimar and Schumacher, Thomas},
  title     = {Aluminium-Einsatz im Verkehrssektor},
  series = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  booktitle = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  publisher = {Forschungszentrum J{\"u}lich},
  address   = {J{\"u}lich},
  isbn      = {3-89336-342-4},
  pages     = {7.1 -- 7.11},
  year      = {2003},
  language  = {de}
}
@incollection{Mandelartz2009,
  author    = {Mandelartz, Johannes},
  title     = {VDI-Richtlinien - mit Technischen Regeln Wirtschaftlichkeit erh{\"o}hen und Standards setzen},
  series = {Betriebliche Instandhaltung},
  booktitle = {Betriebliche Instandhaltung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-00502-2},
  doi       = {10.1007/978-3-642-00502-2_26},
  pages     = {311 -- 317},
  year      = {2009},
  abstract  = {Der Verein Deutscher Ingenieure e.V. (VDI) ist ein gemeinn{\"u}tziger, wirtschaftlich und politisch unabh{\"a}ngiger, technisch-wissenschaftlicher Verein von Ingenieuren und Naturwissenschaftlern. Mit {\"u}ber 137 000 pers{\"o}nlich zugeordneten Mitgliedern ist er eine der gr{\"o}ßten Ingenieur-Vereinigungen Europas und gilt in Deutschland als f{\"u}hrender Sprecher der Technik und der Ingenieure. 1856 gegr{\"u}ndet, hat er viele f{\"u}r die Technik wesentliche Entwicklungen in Gang gesetzt, so im Bereich der technischen {\"U}berwachung, der technischen Regelsetzung und Normung, der Arbeitsstudien, im gewerblichen Rechtsschutz und im Patentwesen. Seit seiner Gr{\"u}ndung sieht es der VDI als seine Aufgabe, "das Zusammenwirken aller geistiger Kr{\"a}fte der Technik im Bewusstsein ethischer Verantwortung zu f{\"o}rdern" und die Lebensm{\"o}glichkeiten aller Menschen durch Entwicklung und sinnvoller Anwendung technischer Mittel zu verbessern.},
  language  = {de}
}
@incollection{Mandelartz2007,
  author    = {Mandelartz, Johannes},
  title     = {VDI-Richtlinien und Standards zu RFID},
  series = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)},
  booktitle = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)},
  publisher = {Verl. Praxiswissen},
  address   = {Dortmund},
  isbn      = {978-3-89957-061-8},
  pages     = {169 -- 179},
  year      = {2007},
  language  = {de}
}
@incollection{MacdonaldMcGrathAppourchauxetal.2014,
  author    = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, W. and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a solar polar mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  editor    = {Macdonald, Malcolm},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-642-34906-5},
  doi       = {10.1007/978-3-642-34907-2_17},
  pages     = {243 -- 257},
  year      = {2014},
  abstract  = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.},
  language  = {en}
}
@incollection{LuczakWolfSchlicketal.1999,
  author    = {Luczak, Holger and Wolf, Martin and Schlick, Christopher and Springer, J. and Foltz, Christian},
  title     = {Personenorientierte Arbeitsprozesse und Kommunikationsforrnen},
  series = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse},
  booktitle = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse},
  editor    = {Nagl, Walter},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63920-9},
  pages     = {403 -- 422},
  year      = {1999},
  language  = {de}
}
@incollection{LuczakWolfMuehlfelder2001,
  author    = {Luczak, Holger and Wolf, Martin and M{\"u}hlfelder, M.},
  title     = {Arbeitswissenschaft},
  series = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  booktitle = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  editor    = {Schwabe, Gerhard},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-67552-5},
  doi       = {10.1007/978-3-642-56848-0_2},
  pages     = {7 -- 14},
  year      = {2001},
  abstract  = {Unter Arbeit wird das T{\"a}tigsein des Menschen verstanden, bei dem dieser mit anderen Menschen und (technischen) Hilfsmitteln in Interaktion tritt, um unter wirtschaftlichen Zielsetzungen G{\"u}ter und Dienstleistungen zu erstellen (Luczak, 1998a). Arbeit dient direkt oder indirekt der Erhaltung der eigenen Existenz und der Existenz der Gesellschaft. Arbeit ist deshalb eine besondere Form des T{\"a}tigseins neben anderen wie Spiel, Sport, Lemen usw.},
  language  = {de}
}
@incollection{LohseStroetmann2012,
  author    = {Lohse, Wolfram and Stroetmann, Richard},
  title     = {Stahlbau},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_13},
  pages     = {777 -- 1019},
  year      = {2012},
  language  = {de}
}