@article{WarerkarSchmitzGoettscheetal.2007,
  author    = {Warerkar, Shashikant and Schmitz, Stefan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Wirtschaftlich und flexibel : Luft-Sand-W{\"a}rme{\"u}bertrager f{\"u}r die Energiespeicherung bei Temperaturen bis 800 °C},
  series = {Verfahrenstechnik. 41 (2007), H. 4},
  journal   = {Verfahrenstechnik. 41 (2007), H. 4},
  isbn      = {0175-5315},
  pages     = {72 -- 73},
  year      = {2007},
  language  = {de}
}
@inproceedings{WarerkarSchmitzGoettscheetal.2008,
  author    = {Warerkar, S. and Schmitz, S. and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Tamme, R.},
  title     = {Performance analysis of an air-sand heat exchanger prototype for high-temperature storage},
  series = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings ; 7th - 10th October 2008, Lisbon, Portugal : key lectures / ISES, International Solar Energy Society. Vol. 1},
  booktitle = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings ; 7th - 10th October 2008, Lisbon, Portugal : key lectures / ISES, International Solar Energy Society. Vol. 1},
  publisher = {Sociedade Portuguesa De Energia Solar (SPES)},
  address   = {Lissabon},
  isbn      = {978-1-61782-228-5},
  pages     = {2215 -- 2222},
  year      = {2008},
  language  = {en}
}
@article{WardoyoNoorElbersetal.2020,
  author    = {Wardoyo, Arinto Y.P. and Noor, Johan A.E. and Elbers, Gereon and Schmitz, Sandra and Flaig, Sascha T. and Budianto, Arif},
  title     = {Characterizing volcanic ash elements from the 2015 eruptions of bromo and raung volcanoes, Indonesia},
  series = {Polish Journal of Environmental Studies},
  volume    = {29},
  journal   = {Polish Journal of Environmental Studies},
  number    = {2},
  publisher = {HARD},
  address   = {Olsztyn},
  issn      = {2083-5906},
  doi       = {10.15244/pjoes/99101},
  pages     = {1899 -- 1907},
  year      = {2020},
  abstract  = {The volcanic eruptions of Mt. Bromo and Mt. Raung in East Java, Indonesia, in 2015 perturbed volcanic materials and affected surface-layer air quality at surrounding locations. During the episodes, the volcanic ash from the eruptions influenced visibility, traffic accidents, flight schedules, and human health. In this research, the volcanic ash particles were collected and characterized by relying on the detail of physical observation. We performed an assessment of the volcanic ash elements to characterize the volcanic ash using two different methods which are aqua regia extracts followed by MP-AES and XRF laboratory test of bulk samples. The analysis results showed that the volcanic ash was mixed of many materials, such as Al, Si, P, K, Ca, Ti, V, Cr, Mn, Fe, Ni, and others. Fe, Si, Ca, and Al were found as the major elements, while the others were the trace elements Ba, Cr, Cu, Mn, P, Mn, Ni, Zn, Sb, Sr, and V with the minor concentrations. XRF analyses showed that Fe dominated the elements of the volcanic ash. The XRF analysis showed that Fe was at 35.40\% in Bromo and 43.00\% in Raung of the detected elements in bulk material. The results of aqua regia extracts analyzed by MP-AES were 1.80\% and 1.70\% of Fe element for Bromo and Raung volcanoes, respectively.},
  language  = {en}
}
@inproceedings{WangMensingGligorevicetal.2008,
  author    = {Wang, W. and Mensing, C. and Gligorevic, Snjezana and Jost, T. and Dammann, A.},
  title     = {Short term statistical analysis of outdoor to indoor propagation channel for geolocations},
  series = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  booktitle = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  organization    = {International OFDM Workshop <13, 2008, Hamburg>},
  pages     = {85 -- 89},
  year      = {2008},
  language  = {en}
}
@article{WangDruckenmuellerElbersetal.2014,
  author    = {Wang, Ren-Qi and Druckenm{\"u}ller, Katharina and Elbers, Gereon and Guenther, Klaus and Crou{\´e}, Jean-Philippe},
  title     = {Analysis of aquatic-phase natural organic matter by optimized LDI-MS method},
  series = {Journal of mass spectrometry},
  volume    = {49},
  journal   = {Journal of mass spectrometry},
  number    = {2},
  publisher = {Wiley},
  address   = {Bognor Regis},
  issn      = {1096-9888},
  doi       = {10.1002/jms.3321},
  pages     = {154 -- 160},
  year      = {2014},
  abstract  = {The composition and physiochemical properties of aquatic-phase natural organic matter (NOM) are most important problems for both environmental studies and water industry. Laser desorption/ionization (LDI) mass spectrometry facilitated successful examinations of NOM, as humic and fulvic acids in NOM are readily ionized by the nitrogen laser. In this study, hydrophobic NOMs (HPO NOMs) from river, reservoir and waste water were characterized by this technique. The effect of analytical variables like concentration, solvent composition and laser energy was investigated. The exact masses of small molecular NOM moieties in the range of 200-1200 m/z were determined in reflectron mode. In addition, spectra of post-source-decay experiments in this range showed that some compounds from different natural NOMs had the same fragmental ions. In the large mass range of 1200-15 000 Da, macromolecules and their aggregates were found in HPO NOMs from natural waters. Highly humic HPO exhibited mass peaks larger than 8000 Da. On the other hand, the waste water and reservoir water mainly had relatively smaller molecules of about 2000 Da. The LDI-MS measurements indicated that highly humic river waters were able to form large aggregates and membrane foulants, while the HPO NOMs from waste water and reservoir water were unlikely to form large aggregates. Copyright © 2014 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{WangKrauseBlocketal.2003,
  author    = {Wang, J. and Krause, R. and Block, K. and Musameh, M. and Mulchandani, A. and Sch{\"o}ning, Michael Josef},
  title     = {Flow injection amperometric detection of OP nerve agents based on organophosphorus-hydrolase biosensor detector},
  series = {Biosensors \& Bioelectronics. 18 (2003), H. 2-3},
  journal   = {Biosensors \& Bioelectronics. 18 (2003), H. 2-3},
  isbn      = {0956-5663},
  pages     = {255 -- 260},
  year      = {2003},
  language  = {en}
}
@misc{WandreyBiselliSchroederetal.1999,
  author    = {Wandrey, Christian and Biselli, Manfred and Schr{\"o}der, Bernd and Schmoll, Hans-Joachim},
  title     = {Culturing cells on macroporous glass carriers coated with gelatin, extracellular matrix protein and stromal cells},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {en}
}
@masterthesis{Wamper2023,
  type      = {Bachelor Thesis},
  author    = {Wamper, Lukas},
  title     = {Bachelorzeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {67 Seiten},
  year      = {2023},
  abstract  = {Die Bachelorarbeit behandelt die Konzeption und Produktion der Sendung "Bachelorzeit". Ziel ist es, eine innovative Plattform f{\"u}r junge Zuschauer:innen zu schaffen und Einblicke in das Leben und die Themen der Stadt Aachen zu geben. Die Arbeit umfasst den gesamten Produktionsprozess inklusive der Einbindung der Zuschauer:innen und der visuellen Gestaltung. Die erfolgreiche Umsetzung erm{\"o}glicht eine ansprechende und nahbare Atmosph{\"a}re f{\"u}r ein j{\"u}ngeres Publikum.},
  language  = {de}
}
@article{WaltherGerthsenCariusetal.1993,
  author    = {Walther, T. and Gerthsen, D. and Carius, Reinhard and F{\"o}rster, Arnold},
  title     = {AlAs/GaAs Quantum well structures: Interface properties investigated by high-resolution transmission electron microscopy and photoluminescence spectroscopy / T. Walther ; D. Gerthsen ; R. Carius ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  journal   = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0290-9},
  pages     = {449 -- ff.},
  year      = {1993},
  language  = {en}
}
@inproceedings{WalterElsenMuelleretal.1999,
  author    = {Walter, Peter and Elsen, Ingo and M{\"u}ller, Holger and Kraiss, Karl-Friedrich},
  title     = {3D object recognition with a specialized mixtures of experts architecture},
  series = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  booktitle = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-5529-6},
  issn      = {1098-7576},
  doi       = {10.1109/IJCNN.1999.836243},
  pages     = {3563 -- 3568},
  year      = {1999},
  abstract  = {Aim of the AXON2 project (Adaptive Expert System for Object Recogniton using Neuml Networks) is the development of an object recognition system (ORS) capable of recognizing isolated 3d objects from arbitrary views. Commonly, classification is based on a single feature extracted from the original image. Here we present an architecture adapted from the Mixtures of Eaqerts algorithm which uses multiple neuml networks to integmte different features. During tmining each neural network specializes in a subset of objects or object views appropriate to the properties of the corresponding feature space. In recognition mode the system dynamically chooses the most relevant features and combines them with maximum eficiency. The remaining less relevant features arz not computed and do therefore not decelerate the-recognition process. Thus, the algorithm is well suited for ml-time applications.},
  language  = {en}
}
@inproceedings{WalterGligorevicDetertetal.2010,
  author    = {Walter, Michael and Gligorevic, Snjezana and Detert, Thorben and Schnell, Michael},
  title     = {UHF/VHF air-to-air propagation measurements},
  series = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  booktitle = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4244-6431-9 ; 978-84-7653-472-4},
  pages     = {1 -- 5},
  year      = {2010},
  language  = {en}
}
@article{WalterBorchert2002,
  author    = {Walter, G. and Borchert, J{\"o}rg},
  title     = {Der Einsatz von Realoptionen in der Elektrizit{\"a}tswirtschaft},
  series = {M \& A Review},
  journal   = {M \& A Review},
  number    = {4},
  issn      = {1616-0878},
  pages     = {198},
  year      = {2002},
  language  = {de}
}
@inproceedings{WallnoeferDrathHuening2015,
  author    = {Walln{\"o}fer, Armin and Drath, Rainer and H{\"u}ning, Felix},
  title     = {Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen},
  series = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  booktitle = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092258-4},
  pages     = {1 CD-ROM},
  year      = {2015},
  language  = {de}
}
@article{WallerBraunHojdisetal.2007,
  author    = {Waller, Mark P. and Braun, Heiko and Hojdis, Nils and B{\"u}hl, Michael},
  title     = {Geometries of Second-Row Transition-Metal Complexes from Density-Functional Theory},
  series = {Journal of Chemical Theory and Computation},
  volume    = {3},
  journal   = {Journal of Chemical Theory and Computation},
  number    = {6},
  issn      = {1549-9626},
  doi       = {10.1021/ct700178y},
  pages     = {2234 -- 2242},
  year      = {2007},
  language  = {en}
}
@article{WallenbornRitz2014,
  author    = {Wallenborn, Ramona and Ritz, Thomas},
  title     = {Mobilit{\"a}t miteinander teilen : st{\"a}dtisches eCarsharing in einer vernetzten Gesellschaft ; [vernetztes Fahren von morgen]},
  series = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  volume    = {5},
  journal   = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  number    = {14 (Herbstausg.)},
  publisher = {Bundesverband eMobilit{\"a}t BEM},
  address   = {Berlin},
  issn      = {2191-5636},
  pages     = {92 -- 95},
  year      = {2014},
  language  = {de}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@masterthesis{Waliszewska2023,
  type      = {Bachelor Thesis},
  author    = {Waliszewska, Laura},
  title     = {Werkstatt voller Historie},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {35 Seiten},
  year      = {2023},
  abstract  = {Das Buch „Werkstatt voller Historie" gibt einen Einblick in das Handwerk der Restaurierung und Konservierung. Wir leben in einer Gesellschaft, die von Konsum und schneller Verf{\"u}gbarkeit gepr{\"a}gt ist. Produkte werden in Massen produziert, genutzt und oft schon nach kurzer Zeit wieder weggeworfen. Durch diese Mentalit{\"a}t der Wegwerfgesellschaft werden die Ressourcen unserer Erde ersch{\"o}pft, und Umweltprobleme werden immer gr{\"o}ßer. Deshalb ist es wichtig, sich intensiv mit der Bewahrung von Kulturgut auseinanderzusetzen. Durch die Verwendung von Illustrationen und visuellen Darstellungen erleichtert das Buch die Kommunikation. Dadurch kann der Restaurierungsprozess einfacher verstanden werden. Mit dem Projekt soll das Interesse geweckt und {\"u}ber die Grundlagen und Herausforderungen der Restaurierung aufgekl{\"a}rt werden.},
  language  = {de}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@article{WaldvogelRitzmannFreyleretal.2021,
  author    = {Waldvogel, Janice and Ritzmann, Ramona and Freyler, Kathrin and Helm, Michael and Monti, Elena and Albracht, Kirsten and St{\"a}udle, Benjamin and Gollhofer, Albert and Narici, Marco},
  title     = {The Anticipation of Gravity in Human Ballistic Movement},
  series = {Frontiers in Physiology},
  journal   = {Frontiers in Physiology},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2021.614060},
  year      = {2021},
  abstract  = {Stretch-shortening type actions are characterized by lengthening of the pre-activated muscle-tendon unit (MTU) in the eccentric phase immediately followed by muscle shortening. Under 1 g, pre-activity before and muscle activity after ground contact, scale muscle stiffness, which is crucial for the recoil properties of the MTU in the subsequent push-off. This study aimed to examine the neuro-mechanical coupling of the stretch-shortening cycle in response to gravity levels ranging from 0.1 to 2 g. During parabolic flights, 17 subjects performed drop jumps while electromyography (EMG) of the lower limb muscles was combined with ultrasound images of the gastrocnemius medialis, 2D kinematics and kinetics to depict changes in energy management and performance. Neuro-mechanical coupling in 1 g was characterized by high magnitudes of pre-activity and eccentric muscle activity allowing an isometric muscle behavior during ground contact. EMG during pre-activity and the concentric phase systematically increased from 0.1 to 1 g. Below 1 g the EMG in the eccentric phase was diminished, leading to muscle lengthening and reduced MTU stretches. Kinetic energy at take-off and performance were decreased compared to 1 g. Above 1 g, reduced EMG in the eccentric phase was accompanied by large MTU and muscle stretch, increased joint flexion amplitudes, energy loss and reduced performance. The energy outcome function established by linear mixed model reveals that the central nervous system regulates the extensor muscles phase- and load-specifically. In conclusion, neuro-mechanical coupling appears to be optimized in 1 g. Below 1 g, the energy outcome is compromised by reduced muscle stiffness. Above 1 g, loading progressively induces muscle lengthening, thus facilitating energy dissipation.},
  language  = {en}
}
@article{WaldvogelFreylerHelmetal.2023,
  author    = {Waldvogel, Janice and Freyler, Kathrin and Helm, Michael and Monti, Elena and St{\"a}udle, Benjamin and Gollhofer, Albert and Narici, Marco V. and Ritzmann, Ramona and Albracht, Kirsten},
  title     = {Changes in gravity affect neuromuscular control, biomechanics, and muscle-tendon mechanics in energy storage and dissipation tasks},
  series = {Journal of Applied Physiology},
  volume    = {134},
  journal   = {Journal of Applied Physiology},
  number    = {1},
  publisher = {American Physiological Society},
  address   = {Bethesda, Md.},
  issn      = {1522-1601 (Onlineausgabe)},
  doi       = {10.1152/japplphysiol.00279.2022},
  pages     = {190 -- 202},
  year      = {2023},
  abstract  = {This study evaluates neuromechanical control and muscle-tendon interaction during energy storage and dissipation tasks in hypergravity. During parabolic flights, while 17 subjects performed drop jumps (DJs) and drop landings (DLs), electromyography (EMG) of the lower limb muscles was combined with in vivo fascicle dynamics of the gastrocnemius medialis, two-dimensional (2D) kinematics, and kinetics to measure and analyze changes in energy management. Comparisons were made between movement modalities executed in hypergravity (1.8 G) and gravity on ground (1 G). In 1.8 G, ankle dorsiflexion, knee joint flexion, and vertical center of mass (COM) displacement are lower in DJs than in DLs; within each movement modality, joint flexion amplitudes and COM displacement demonstrate higher values in 1.8 G than in 1 G. Concomitantly, negative peak ankle joint power, vertical ground reaction forces, and leg stiffness are similar between both movement modalities (1.8 G). In DJs, EMG activity in 1.8 G is lower during the COM deceleration phase than in 1 G, thus impairing quasi-isometric fascicle behavior. In DLs, EMG activity before and during the COM deceleration phase is higher, and fascicles are stretched less in 1.8 G than in 1 G. Compared with the situation in 1 G, highly task-specific neuromuscular activity is diminished in 1.8 G, resulting in fascicle lengthening in both movement modalities. Specifically, in DJs, a high magnitude of neuromuscular activity is impaired, resulting in altered energy storage. In contrast, in DLs, linear stiffening of the system due to higher neuromuscular activity combined with lower fascicle stretch enhances the buffering function of the tendon, and thus the capacity to safely dissipate energy.},
  language  = {en}
}
@inproceedings{WaldmannVeraDachwaldetal.2018,
  author    = {Waldmann, Christoph and Vera, Jean-Pierre de and Dachwald, Bernd and Strasdeit, Henry and Sohl, Frank and Hanff, Hendrik and Kowalski, Julia and Heinen, Dirk and Macht, Sabine and Bestmann, Ulf and Meckel, Sebastian and Hildebrandt, Marc and Funke, Oliver and Gehrt, Jan-J{\"o}ran},
  title     = {Search for life in ice-covered oceans and lakes beyond Earth},
  series = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761},
  booktitle = {2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761},
  doi       = {10.1109/AUV.2018.8729761},
  year      = {2018},
  abstract  = {The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.},
  language  = {en}
}
@masterthesis{Wahlefeld2021,
  type      = {Bachelor Thesis},
  author    = {Wahlefeld, Leon},
  title     = {Generative Gestaltung: wie eine Herangehensweise die Zukunft des Designs revolutionieren k{\"o}nnte.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {188 Seiten},
  year      = {2021},
  abstract  = {Diese Bachelorarbeit setzt sich mit der „Generativen Gestaltung" und ihren M{\"o}glichkeiten f{\"u}r Gestaltende auseinander. Die automatisierte Bearbeitung eines gestalterischen Projektes soll vorrangig Vorteile beim Arbeiten mit großen Datenmengen bieten. Ziel war es, eine Plakatreihe zu entwerfen, die auf der Grundlage eines Codes - also eines strikten Regelwerks - basiert. Mithilfe dieses Verfahrens kann auf Knopfdruck eine beliebige Menge an Plakaten generiert werden. Durch die Festlegung bestimmter Parameter innerhalb des Codes wird gew{\"a}hrleistet, dass jedes ausgespielte Plakat anders ist als sein Vorg{\"a}nger. Diese Arbeit dient als eine erste anskizzierte Grundlage daf{\"u}r, wie grafischer Output automatisiert und vor allem aktualisiert generiert werden kann. Dieses Prinzip kann auf eine Vielzahl von Inhalten und Umsetzungen angewendet werden.},
  language  = {de}
}
@inproceedings{WahleZeleny1995,
  author    = {Wahle, Michael and Zeleny, R.},
  title     = {Berechnung von Elastomer-Bauteilen bei quasistatischer Belastung unter Ber{\"u}cksichtigung von Eigenkontakt und {\"a}ußeren Reibungseinfl{\"u}ssen},
  series = {13. CAD-FEM Users' Meeting : FEM-Technologietage, 25. - 27. Oktober 1995 in Bad Wildungen bei Kassel / [Hrsg.: CAD-FEM GmbH]},
  booktitle = {13. CAD-FEM Users' Meeting : FEM-Technologietage, 25. - 27. Oktober 1995 in Bad Wildungen bei Kassel / [Hrsg.: CAD-FEM GmbH]},
  address   = {Grafing b. M{\"u}nchen [u.a.]},
  pages     = {5 -- 6},
  year      = {1995},
  language  = {de}
}
@article{WahleWeber2002,
  author    = {Wahle, Michael and Weber, M.},
  title     = {Simulationsmodell zur Darstellung der Eigenschaften von Fahrzeug-Stoßd{\"a}mpfern bei beliebiger dynamischer Belastung, Simulationsmodell f{\"u}r Stoßd{\"a}mpfer},
  year      = {2002},
  language  = {de}
}
@article{WahleWeber2001,
  author    = {Wahle, Michael and Weber, M.},
  title     = {Zum Stand von Komponentenmodellen im Rahmen der Fahrzeugsimulation},
  year      = {2001},
  language  = {de}
}
@misc{WahlePeter1992,
  author    = {Wahle, Michael and Peter, Roland},
  title     = {Bismaleinimidharze : Offenlegungsschrift / Europ{\"a}ische Patentanmeldung},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {6 S. : graph. Darst.},
  year      = {1992},
  language  = {de}
}
@misc{WahleFriedrich1996,
  author    = {Wahle, Michael and Friedrich, Peter Ralph},
  title     = {Anordnung zur schwingungsisolierenden Lagerung von Massen oder elastischen Systemen : Offenlegungsschrift},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {8 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@misc{WahleFrankeRoland1993,
  author    = {Wahle, Michael and Franke, Harald and Roland, Peter},
  title     = {Verfahren und Vorrichtung zur Herstellung von Bauteilen aus Verbundwerkstofflaminaten mit Duromermatrix : Offenlegungsschrift},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {6 S. : graph. Darst.},
  year      = {1993},
  language  = {de}
}
@book{Wahle1998,
  author    = {Wahle, Michael},
  title     = {Grundlagen der Maschinen- und Strukturdynamik. - (H{\"o}here Technische Mechanik ; 2)},
  publisher = {Verl. Mainz},
  address   = {Aachen},
  isbn      = {3-89653-391-6},
  pages     = {216 S. : Ill.},
  year      = {1998},
  language  = {de}
}
@book{Wahle1998,
  author    = {Wahle, Michael},
  title     = {Dynamik : Kinematik und Kinetik},
  edition   = {2. Aufl.},
  publisher = {Verl. Mainz},
  address   = {Aachen},
  isbn      = {3-89653-390-8},
  pages     = {158 S. : graph. Darst.},
  year      = {1998},
  language  = {de}
}
@article{Wahle2000,
  author    = {Wahle, Michael},
  title     = {Auf sicheren F{\"u}ßen stehen : Entwicklung eines Maschinenlagers mit einem Federkern aus zelligem Polyurethan},
  series = {Der Konstrukteur},
  volume    = {31},
  journal   = {Der Konstrukteur},
  number    = {6},
  isbn      = {0344-4570},
  pages     = {30 -- 32},
  year      = {2000},
  language  = {de}
}
@incollection{Wahle1997,
  author    = {Wahle, Michael},
  title     = {Strukturmechanische Auslegung von Elastomer-Bauteilen in der Schwingungstechnik},
  series = {Kolloquium anl{\"a}ßlich des 70. Geburtstags von H. {\"O}ry : [29.09.1997 - 30.09.1997, K{\´a}rm{\´a}n-Auditorium, H{\"o}rsaal FO5, RWTH Aachen]},
  booktitle = {Kolloquium anl{\"a}ßlich des 70. Geburtstags von H. {\"O}ry : [29.09.1997 - 30.09.1997, K{\´a}rm{\´a}n-Auditorium, H{\"o}rsaal FO5, RWTH Aachen]},
  editor    = {Reimerdes, Hans-G.},
  publisher = {Inst. f{\"u}r Leichtbau},
  address   = {Aachen},
  pages     = {175 -- 188},
  year      = {1997},
  language  = {de}
}
@inproceedings{Wahle1987,
  author    = {Wahle, Michael},
  title     = {Optimale Auslegung von Schwingungsd{\"a}mpfern zur Schwingungsberuhigung elastischer Strukturen},
  series = {D{\"a}mpfung von Schwingungen bei Maschinen und Bauwerken : Tagung N{\"u}rnberg, 9. u. 10. April 1987. - (VDI-Berichte ; 627)},
  booktitle = {D{\"a}mpfung von Schwingungen bei Maschinen und Bauwerken : Tagung N{\"u}rnberg, 9. u. 10. April 1987. - (VDI-Berichte ; 627)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-090627-8},
  pages     = {355 -- 373},
  year      = {1987},
  language  = {de}
}
@phdthesis{Wahle1985,
  author    = {Wahle, Michael},
  title     = {Beitrag zur passiven Kontrolle schwach ged{\"a}mpfter elastischer Strukturen mittels dynamischer Schwingungsd{\"a}mpfer},
  pages     = {XIV, 305 S. : Ill., zahlr. graph. Darst.},
  year      = {1985},
  language  = {de}
}
@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects},
  series = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  booktitle = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  publisher = {British Nuclear Energy Society},
  address   = {London},
  isbn      = {0-7277-0192-4 (Druckausg.)},
  pages     = {162 -- 183},
  year      = {1983},
  language  = {en}
}
@book{Wahle1999,
  author    = {Wahle, Michael},
  title     = {Angewandte Strukturanalyse. - (Dynamik)},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-89653-567-6},
  pages     = {120, A41 S. : Ill., graph. Darst.},
  year      = {1999},
  language  = {de}
}
@book{Wahle1995,
  author    = {Wahle, Michael},
  title     = {Grundlagen der Maschinen- und Strukturdynamik. - (H{\"o}here Technische Mechanik ; 2)},
  edition   = {1. Aufl.},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-930911-61-2},
  pages     = {216 S. : graph. Darst.},
  year      = {1995},
  language  = {de}
}
@book{Wahle1994,
  author    = {Wahle, Michael},
  title     = {Kinetik. - (Dynamik ; 2)},
  edition   = {1. Aufl.},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3- 930085-94-1},
  pages     = {91 S. : graph. Darst.},
  year      = {1994},
  language  = {de}
}
@book{Wahle1993,
  author    = {Wahle, Michael},
  title     = {Kinematik. - (Dynamik ; 1)},
  edition   = {1. Aufl.},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-930085-25-9},
  pages     = {72 S. : graph. Darst.},
  year      = {1993},
  language  = {de}
}
@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes},
  series = {Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)},
  booktitle = {Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)},
  publisher = {Begell House},
  address   = {Redding, Connecticut},
  pages     = {339 -- 353},
  year      = {1983},
  language  = {en}
}
@misc{Wahle1994,
  author    = {Wahle, Michael},
  title     = {Stoßd{\"a}mpfer : Offenlegungschrift / Europ{\"a}ische Patentschrift},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {7 S. : graph. Darst.},
  year      = {1994},
  language  = {de}
}
@misc{Wahle1990,
  author    = {Wahle, Michael},
  title     = {Anordnung zum D{\"a}mpfen von Schwingungen elastischer Systeme : Offenlegungsschrift / Europ{\"a}ische Patentschrift},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {6 S. : graph. Darst.},
  year      = {1990},
  language  = {de}
}
@misc{Wahle1989,
  author    = {Wahle, Michael},
  title     = {Gestaltung von plattenf{\"o}rmigen Hohlprofilen oder wellblechartigen Profilen : Offenlegungsschrift / Europ{\"a}ische Patentschrift},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {8 S. : graph. Darst.},
  year      = {1989},
  language  = {de}
}
@inproceedings{WagnerYoshinobuSchoening2008,
  author    = {Wagner, Torsten and Yoshinobu, T. and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensor as semiconductor-based sensor platform for (bio-) chemical sensing},
  series = {Armenian Journal of Physics},
  booktitle = {Armenian Journal of Physics},
  issn      = {1829-1171},
  pages     = {99 -- 103},
  year      = {2008},
  language  = {en}
}
@article{WagnerYoshinobuRaoetal.2005,
  author    = {Wagner, Torsten and Yoshinobu, T. and Rao, C. and Otto, R. and Sch{\"o}ning, Michael Josef},
  title     = {„All-in-one" solid-state device based on a lightaddressable potentiometric sensor platform},
  series = {Transducers '05 : the 13th International Conference on Solid-State Sensors, Actuators and Microsystems ; Seoul, Korea, [June 5 - 9, 2005] ; digest of technical papers / sponsored by Korean Sensors Society. Technical co-sponsors: IEEE Electron Devices Society},
  journal   = {Transducers '05 : the 13th International Conference on Solid-State Sensors, Actuators and Microsystems ; Seoul, Korea, [June 5 - 9, 2005] ; digest of technical papers / sponsored by Korean Sensors Society. Technical co-sponsors: IEEE Electron Devices Society},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-83995-6},
  pages     = {1872 -- 1875},
  year      = {2005},
  language  = {en}
}
@inproceedings{WagnerYoshinobuOttoetal.2006,
  author    = {Wagner, Torsten and Yoshinobu, T. and Otto, R. and Rao, C. and Molina, R. and Sch{\"o}ning, Michael Josef},
  title     = {Licht-adressierbare potentiometrische Sensorsysteme - Konzepte und Anwendungen},
  series = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau},
  booktitle = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau},
  publisher = {VDE Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2939-3},
  pages     = {165 -- 168},
  year      = {2006},
  language  = {de}
}
@article{WagnerWernerMiyamotoetal.2012,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-Ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Development and characterisation of a compact light-addressable potentiometric sensor (LAPS) based on the digital light processing (DLP) technology for flexible chemical imaging},
  series = {Sensors and Actuators B: Chemical},
  volume    = {170},
  journal   = {Sensors and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2010.12.003},
  pages     = {34 -- 39},
  year      = {2012},
  abstract  = {Chemical imaging systems allow the visualisation of the distribution of chemical species on the sensor surface. This work represents a new flexible approach to read out light-addressable potentiometric sensors (LAPS) with the help of a digital light processing (DLP) set-up. The DLP, known well for video projectors, consists of a mirror-array MEMS device, which allows fast and flexible generation of light patterns. With the help of these light patterns, the sensor surface of the LAPS device can be addressed. The DLP approach has several advantages compared to conventional LAPS set-ups, e.g., the spot size and the shape of the light pointer can be changed easily and no mechanical movement is necessary, which reduces the size of the set-up and increases the stability and speed of the measurement. In addition, the modulation frequency and intensity of the light beam are important parameters of the LAPS set-up. Within this work, the authors will discuss two different ways of light modulation by the DLP set-up, investigate the influence of different modulation frequencies and different light intensities as well as demonstrate the scanning capabilities of the new set-up by pH mapping on the sensor surface.},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2011,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-Ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {A high-density multi-point LAPS set-up using a VCSEL array and FPGA control},
  series = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  journal   = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1873-3077},
  pages     = {124 -- 128},
  year      = {2011},
  language  = {en}
}