@article{HacklAndermahrStaatetal.2017,
  author    = {Hackl, M. and Andermahr, J. and Staat, Manfred and Bremer, I. and Borggrefe, J. and Prescher, A. and M{\"u}ller, L. P. and Wegmann, K.},
  title     = {Suture button reconstruction of the central band of the interosseous membrane in Essex-Lopresti lesions: a comparative biomechanical investigation},
  series = {The Journal of Hand Surgery (European Volume)},
  volume    = {42},
  journal   = {The Journal of Hand Surgery (European Volume)},
  number    = {4},
  publisher = {Sage},
  address   = {London},
  issn      = {2043-6289 (Online)},
  doi       = {10.1177/1753193416665943},
  pages     = {370 -- 376},
  year      = {2017},
  language  = {en}
}
@article{HackerKraftZoell2011,
  author    = {Hacker, Tobias and Kraft, Bodo and Z{\"o}ll, Axel},
  title     = {Projektzuschnitt f{\"u}r die inkrementelle Systementwicklung im Konzernverbund},
  isbn      = {978-3-8322-9990-3},
  pages     = {78 -- 83},
  year      = {2011},
  language  = {de}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@article{GoettscheTammeNunez2005,
  author    = {G{\"o}ttsche, Joachim and Tamme, Rainer and Nunez, Thomas},
  title     = {Speicherung f{\"u}r Hochtemperaturw{\"a}rme / Rainer Tamme ; Joachim G{\"o}ttsche ; Thomas Nunez},
  series = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  journal   = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  publisher = {Forschungsverbund Sonnenenergie},
  address   = {Berlin},
  pages     = {126 -- 131},
  year      = {2005},
  language  = {de}
}
@article{GoettscheSchwarzerRoetheretal.2009,
  author    = {G{\"o}ttsche, Joachim and Schwarzer, Klemens and R{\"o}ther, S. and Jellinghaus, Sabine},
  title     = {Efficient daylighting, heating and shading with rooflight heliostats},
  series = {Conference Internationale Energie Solaire et Batiment},
  journal   = {Conference Internationale Energie Solaire et Batiment},
  publisher = {EPFL},
  address   = {Lausanne},
  pages     = {243 -- 248},
  year      = {2009},
  language  = {en}
}
@article{GoettscheRuss2005,
  author    = {G{\"o}ttsche, Joachim and Russ, Christel},
  title     = {Energieversorgung in Niedrigstenergie-Neubauwohnungen / Christel Russ ; Joachim G{\"o}ttsche},
  series = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  journal   = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  publisher = {Forschungsverbund Sonnenenergie},
  address   = {Berlin},
  pages     = {93 -- 98},
  year      = {2005},
  language  = {de}
}
@article{GoettscheReillyWittwer1991,
  author    = {G{\"o}ttsche, Joachim and Reilly, S. and Wittwer, Volker},
  title     = {Advanced window systems and building energy performance / S. Reilly ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  journal   = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  publisher = {Pergamon Press},
  address   = {Oxford [u.a.]},
  isbn      = {0-08-041690-X},
  pages     = {3211 -- 3216},
  year      = {1991},
  language  = {en}
}
@article{GoettscheHove1999,
  author    = {G{\"o}ttsche, Joachim and Hove, T.},
  title     = {Mapping global, diffuse and beam solar radiation over Zimbabwe / T. Hove ; J. G{\"o}ttsche},
  series = {Renewable energy. 18 (1999), H. 4},
  journal   = {Renewable energy. 18 (1999), H. 4},
  isbn      = {1879-0682},
  pages     = {535 -- 556},
  year      = {1999},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2009,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays / G{\"o}ttsche, Joachim ; Hoffschmidt, Bernhard ; Schmitz, Stefan ; Sauerborn, Markus ; Buck, Reiner ; Teufel, Edgar ; Badst{\"u}bner, Karin ; Ifland, David ; Rebholz, Christian},
  series = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  journal   = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {9780791843208},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {Vol. 132},
  journal   = {Journal of solar energy engineering},
  number    = {Iss. 1},
  isbn      = {0199-6231},
  pages     = {4 S.},
  year      = {2010},
  language  = {en}
}
@article{GoettscheHoffschmidtBoehnischetal.2005,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and B{\"o}hnisch, Helmut and Herkel, Sebastian},
  title     = {Solarisierung von Altbauten / Bernhard Hoffschmidt ; Helmut B{\"o}hnisch ; Joachim G{\"o}ttsche ; Sebastian Herkel},
  series = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  journal   = {W{\"a}rme und K{\"a}lte - Energie aus Sonne und Erde : Jahrestagung des Forschungsverbunds Sonnenenergie in Kooperation mit der Landesinitiative Zukunftsenergie NRW / Stadermann, Gerd, Hrsg.},
  publisher = {Forschungsverbund Sonnenenergie},
  address   = {Berlin},
  pages     = {99 -- 105},
  year      = {2005},
  language  = {de}
}
@article{GoettscheHoffschmidtAlexopoulosetal.2008,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Alexopoulos, Spiros and Funke, J. and Schwarzb{\"o}zl, P.},
  title     = {First Simulation Results for the Hybridization of Small Solar Power Tower Plants},
  series = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  journal   = {EuroSun 2008 : 1st International Conference on Solar Heating, Cooling and Buildings, 2008-10-07 - 2008-10-10, Lissabon (Portugal). Vol. 1},
  publisher = {Sociedade Portuguesa De Energia Solar (SPES)},
  address   = {Lisbon},
  isbn      = {978-1-61782-228-5},
  pages     = {1299 -- 1306},
  year      = {2008},
  language  = {en}
}
@article{GoettscheHinschWittwer1993,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique : a comparison / J. G{\"o}ttsche ; A. Hinsch ; V. Wittwer},
  series = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  journal   = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  isbn      = {0927-0248},
  pages     = {415 -- 428},
  year      = {1993},
  language  = {en}
}
@article{GoettscheGoetzbergerDengleretal.1992,
  author    = {G{\"o}ttsche, Joachim and Goetzberger, Adolf and Dengler, J. and Rommel, M. (u.a.)},
  title     = {A new transparently insulated, bifacially irradiated solar flat-plate collector / A. Goetzberger ; J. Dengler ; M. Rommel ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar energy. 49 (1992), H. 5},
  journal   = {Solar energy. 49 (1992), H. 5},
  isbn      = {0038-092X},
  pages     = {403 -- 411},
  year      = {1992},
  language  = {en}
}
@article{GoettscheGabrysch2001,
  author    = {G{\"o}ttsche, Joachim and Gabrysch, Karten},
  title     = {Analyse der Studentenwohnungen des Solar-Campus J{\"u}lich / G{\"o}ttsche, Joachim ; Gabrysch, Karten},
  series = {Umwelt, Geb{\"a}ude \& Gesundheit : von Energieeffizienz zur Raumlufthygiene ; Ergebnisse des 6. Fachkongresses der Arbeitsgemeinschaft {\"O}kologischer Forschungsinstitute (AG{\"O}F) am 20. und 21. September 2001 in N{\"u}rnberg / Arbeitsgemeinschaft {\"O}kologischer Forschungsinstitute (AG{\"O}F) e.V. [Red.: Sabine Weber]},
  journal   = {Umwelt, Geb{\"a}ude \& Gesundheit : von Energieeffizienz zur Raumlufthygiene ; Ergebnisse des 6. Fachkongresses der Arbeitsgemeinschaft {\"O}kologischer Forschungsinstitute (AG{\"O}F) am 20. und 21. September 2001 in N{\"u}rnberg / Arbeitsgemeinschaft {\"O}kologischer Forschungsinstitute (AG{\"O}F) e.V. [Red.: Sabine Weber]},
  publisher = {AG{\"O}F},
  address   = {Springe-Eldagsen},
  isbn      = {3-930576-03-1},
  pages     = {134 -- 148},
  year      = {2001},
  language  = {de}
}
@article{GoettscheGabryschSchilleretal.2006,
  author    = {G{\"o}ttsche, Joachim and Gabrysch, K. and Schiller, H. and Schwarzer, Klemens},
  title     = {Energetische Sanierung eines biochemischen Laborgeb{\"a}udes : Auswirkung bedarfsabh{\"a}ngiger L{\"u}ftung mit W{\"a}rmer{\"u}ckgewinnung auf den Prim{\"a}renergieverbrauch},
  series = {Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006 / VDI-Tage der Geb{\"a}udetechnik. VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung},
  journal   = {Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006 / VDI-Tage der Geb{\"a}udetechnik. VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091921-3},
  pages     = {221 -- 230},
  year      = {2006},
  language  = {de}
}
@article{GoettscheGabryschSchilleretal.2004,
  author    = {G{\"o}ttsche, Joachim and Gabrysch, K. and Schiller, H. and Kauert, B. and Schwarzer, Klemens},
  title     = {Energetic Effects of demand - controlled ventilation retrofitting in a biochemical laboratory building},
  series = {AIVC publications [Elektronische Ressource] / Air Infiltration and Ventilation Centre},
  journal   = {AIVC publications [Elektronische Ressource] / Air Infiltration and Ventilation Centre},
  publisher = {INIVE EEIG},
  address   = {Brussels},
  pages     = {50},
  year      = {2004},
  language  = {en}
}
@article{GoettscheGabryschDelahayeetal.2002,
  author    = {G{\"o}ttsche, Joachim and Gabrysch, K. and Delahaye, A. and Schwarzer, Klemens},
  title     = {Solar-Campus Juelich - Energy performance and indoor climate},
  series = {AIVC 23rd conference - EPIC 2002 AIVC (in conjunction with 3rd European Conference on Energy Performance and Indoor Climate in Buildings) - 23-26 October 2002 - Lyon - France - vol 2},
  journal   = {AIVC 23rd conference - EPIC 2002 AIVC (in conjunction with 3rd European Conference on Energy Performance and Indoor Climate in Buildings) - 23-26 October 2002 - Lyon - France - vol 2},
  pages     = {381 -- 386},
  year      = {2002},
  language  = {en}
}
@article{GoettscheDelahayeGabryschetal.2003,
  author    = {G{\"o}ttsche, Joachim and Delahaye, A. and Gabrysch, K. and Schwarzer, Klemens},
  title     = {Solar-Campus J{\"u}lich - Nutzung solarer Gewinne in Geb{\"a}uden},
  series = {13. Symposium Thermische Solarenergie : 14. bis 16. Mai 2003, Kloster Banz / [Wiss. Gesamtleitung: Hans M{\"u}ller-Steinhagen]. Otti-Energie-Kolleg},
  journal   = {13. Symposium Thermische Solarenergie : 14. bis 16. Mai 2003, Kloster Banz / [Wiss. Gesamtleitung: Hans M{\"u}ller-Steinhagen]. Otti-Energie-Kolleg},
  publisher = {Ostbayerisches Technologie-Transfer-Inst., OTTI},
  address   = {Regensburg},
  isbn      = {3-934681-26-3},
  pages     = {362 -- 367},
  year      = {2003},
  language  = {de}
}
@article{GoettscheBlumSchumacher1994,
  author    = {G{\"o}ttsche, Joachim and Blum, K. and Schumacher, J.},
  title     = {Simulationsprogramme in der Solarenergie-Ausbildung / Blum, K. ; G{\"o}ttsche, J. ; Schumacher, J.},
  series = {Energie f{\"u}r die Zukunft : : 28. Juni bis 1. Juli 1994; [Tagungsbericht] / 9. Internationales Sonnenforum '94. [Hrsg. Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V. - DGS. Red. A. Hohmann ...] ; Bd. 2},
  journal   = {Energie f{\"u}r die Zukunft : : 28. Juni bis 1. Juli 1994; [Tagungsbericht] / 9. Internationales Sonnenforum '94. [Hrsg. Deutsche Gesellschaft f{\"u}r Sonnenenergie e.V. - DGS. Red. A. Hohmann ...] ; Bd. 2},
  publisher = {DGS-Sonnenenergie-Verl.},
  address   = {M{\"u}nchen},
  pages     = {1786 -- 1791},
  year      = {1994},
  language  = {de}
}
@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@article{Goettsche2005,
  author    = {G{\"o}ttsche, Joachim},
  title     = {Der vertikale Sonnenlichtquotient : Eine wichtige Kenngr{\"o}ße zur Charakterisierung von Lichtlenksystemen / G{\"o}ttsche, Joachim},
  series = {Elftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 27./28. Januar 2005, [Kloster Banz] / OTTI-Kolleg Beratung, Projekte},
  journal   = {Elftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 27./28. Januar 2005, [Kloster Banz] / OTTI-Kolleg Beratung, Projekte},
  publisher = {Ostbayerisches Technologie-Transfer-Inst., OTTI},
  address   = {Regensburg},
  isbn      = {3934681379},
  pages     = {79 -- 84},
  year      = {2005},
  language  = {de}
}
@article{Goettsche1994,
  author    = {G{\"o}ttsche, Joachim},
  title     = {Eldorado summer schools},
  series = {Progress in solar energy education. 3 (1994)},
  journal   = {Progress in solar energy education. 3 (1994)},
  isbn      = {1018-5607},
  pages     = {31 -- 33},
  year      = {1994},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2020,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Airfoil drag at low-to-medium reynolds numbers: A novel estimation method},
  series = {AIAA Journal},
  volume    = {58},
  journal   = {AIAA Journal},
  number    = {7},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-385X},
  doi       = {10.2514/1.J058983},
  pages     = {2791 -- 2805},
  year      = {2020},
  abstract  = {This paper presents a novel method for airfoil drag estimation at Reynolds numbers between 4×10⁵ and 4×10⁶. The novel method is based on a systematic study of 40 airfoils applying over 600 numerical simulations and considering natural transition. The influence of the airfoil thickness-to-chord ratio, camber, and freestream Reynolds number on both friction and pressure drag is analyzed in detail. Natural transition significantly affects drag characteristics and leads to distinct drag minima for different Reynolds numbers and thickness-to-chord ratios. The results of the systematic study are used to develop empirical correlations that can accurately predict an airfoil drag at low-lift conditions. The new approach estimates a transition location based on airfoil thickness-to-chord ratio, camber, and Reynolds number. It uses the transition location in a mixed laminar-turbulent skin-friction calculation, and corrects the skin-friction coefficient for separation effects. Pressure drag is estimated separately based on correlations of thickness-to-chord ratio, camber, and Reynolds number. The novel method shows excellent accuracy when compared with wind-tunnel measurements of multiple airfoils. It is easily integrable into existing aircraft design environments and is highly beneficial in the conceptual design stage.},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2021,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Aerodynamic Investigations of UAV Sensor Turrets - A Combined Wind-tunnel and CFD Approach},
  series = {SciTech 2021, AIAA SciTech Forum, online, WW, Jan 11-15, 2021},
  journal   = {SciTech 2021, AIAA SciTech Forum, online, WW, Jan 11-15, 2021},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2021-1535},
  pages     = {1 -- 12},
  year      = {2021},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2020,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Improved Form Factor for Drag Estimation of Fuselages with Various Cross Sections},
  series = {Journal of Aircraft},
  journal   = {Journal of Aircraft},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-3868},
  doi       = {10.2514/1.C036032},
  pages     = {1 -- 13},
  year      = {2020},
  abstract  = {The paper presents an aerodynamic investigation of 70 different streamlined bodies with fineness ratios ranging from 2 to 10. The bodies are chosen to idealize both unmanned and small manned aircraft fuselages and feature cross-sectional shapes that vary from circular to quadratic. The study focuses on friction and pressure drag in dependency of the individual body's fineness ratio and cross section. The drag forces are normalized with the respective body's wetted area to comply with an empirical drag estimation procedure. Although the friction drag coefficient then stays rather constant for all bodies, their pressure drag coefficients decrease with an increase in fineness ratio. Referring the pressure drag coefficient to the bodies' cross-sectional areas shows a distinct pressure drag minimum at a fineness ratio of about three. The pressure drag of bodies with a quadratic cross section is generally higher than for bodies of revolution. The results are used to derive an improved form factor that can be employed in a classic empirical drag estimation method. The improved formulation takes both the fineness ratio and cross-sectional shape into account. It shows superior accuracy in estimating streamlined body drag when compared with experimental data and other form factor formulations of the literature.},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2020,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Wind-tunnel and CFD investigations of UAV landing gears and turrets - Improvements in empirical drag estimation},
  series = {Aerospace Science and Technology},
  volume    = {107},
  journal   = {Aerospace Science and Technology},
  number    = {Art. 106306},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1270-9638},
  doi       = {10.1016/j.ast.2020.106306},
  year      = {2020},
  abstract  = {This paper analyzes the drag characteristics of several landing gear and turret configurations that are representative of unmanned aircraft tricycle landing gears and sensor turrets. A variety of these components were constructed via 3D-printing and analyzed in a wind-tunnel measurement campaign. Both turrets and landing gears were attached to a modular fuselage that supported both isolated components and multiple components at a time. Selected cases were numerically investigated with a Reynolds-averaged Navier-Stokes approach that showed good accuracy when compared to wind-tunnel data. The drag of main gear struts could be significantly reduced via streamlining their cross-sectional shape and keeping load carrying capabilities similar. The attachment of wheels introduced interference effects that increased strut drag moderately but significantly increased wheel drag compared to isolated cases. Very similar behavior was identified for front landing gears. The drag of an electro-optical and infrared sensor turret was found to be much higher than compared to available data of a clean hemisphere-cylinder combination. This turret drag was merely influenced by geometrical features like sensor surfaces and the rotational mechanism. The new data of this study is used to develop simple drag estimation recommendations for main and front landing gear struts and wheels as well as sensor turrets. These recommendations take geometrical considerations and interference effects into account.},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2019,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bil, Cees},
  title     = {RANS Simulation Validation of a Small Sensor Turret for UAVs},
  series = {Journal of Aerospace Engineering},
  volume    = {32},
  journal   = {Journal of Aerospace Engineering},
  number    = {5},
  publisher = {ASCE},
  address   = {New York},
  issn      = {1943-5525},
  doi       = {10.1061/(ASCE)AS.1943-5525.0001055},
  pages     = {Article number 04019060},
  year      = {2019},
  abstract  = {Recent Unmanned Aerial Vehicle (UAV) design procedures rely on full aircraft steady-state Reynolds-Averaged-Navier-Stokes (RANS) analyses in early design stages. Small sensor turrets are included in such simulations, even though their aerodynamic properties show highly unsteady behavior. Very little is known about the effects of this approach on the simulation outcomes of small turrets. Therefore, the flow around a model turret at a Reynolds number of 47,400 is simulated with a steady-state RANS approach and compared to experimental data. Lift, drag, and surface pressure show good agreement with the experiment. The RANS model predicts the separation location too far downstream and shows a larger recirculation region aft of the body. Both characteristic arch and horseshoe vortex structures are visualized and qualitatively match the ones found by the experiment. The Reynolds number dependence of the drag coefficient follows the trend of a sphere within a distinct range. The outcomes indicate that a steady-state RANS model of a small sensor turret is able to give results that are useful for UAV engineering purposes but might not be suited for detailed insight into flow properties.},
  language  = {en}
}
@article{GoettenFingerHavermannetal.2021,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, M. and Bil, C.},
  title     = {Full configuration drag estimation of short-to-medium range fixed-wing UAVs and its impact on initial sizing optimization},
  series = {CEAS Aeronautical Journal},
  volume    = {12},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-021-00522-w},
  pages     = {589 -- 603},
  year      = {2021},
  abstract  = {The paper presents the derivation of a new equivalent skin friction coefficient for estimating the parasitic drag of short-to-medium range fixed-wing unmanned aircraft. The new coefficient is derived from an aerodynamic analysis of ten different unmanned aircraft used for surveillance, reconnaissance, and search and rescue missions. The aircraft is simulated using a validated unsteady Reynolds-averaged Navier Stokes approach. The UAV's parasitic drag is significantly influenced by the presence of miscellaneous components like fixed landing gears or electro-optical sensor turrets. These components are responsible for almost half of an unmanned aircraft's total parasitic drag. The new equivalent skin friction coefficient accounts for these effects and is significantly higher compared to other aircraft categories. It is used to initially size an unmanned aircraft for a typical reconnaissance mission. The improved parasitic drag estimation yields a much heavier unmanned aircraft when compared to the sizing results using available drag data of manned aircraft.},
  language  = {en}
}
@article{GoettenFingerHavermannetal.2018,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bill, C.},
  title     = {On the flight performance impact of landing gear drag reduction methods for unmanned air vehicles},
  series = {Deutscher Luft- und Raumfahrtkongress 2018},
  journal   = {Deutscher Luft- und Raumfahrtkongress 2018},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/480058},
  pages     = {11 S.},
  year      = {2018},
  abstract  = {The flight performance impact of three different landing gear configurations on a small, fixed-wing UAV is analyzed with a combination of RANS CFD calculations and an incremental flight performance algorithm. A standard fixed landing gear configuration is taken as a baseline, while the influence of retracting the landing gear or applying streamlined fairings is investigated. A retraction leads to a significant parasite drag reduction, while also fairings promise large savings. The increase in lift-to-drag ratio is reduced at high lift coefficients due to the influence of induced drag. All configurations are tested on three different design missions with an incremental flight performance algorithm. A trade-off study is performed using the retracted or faired landing gear's weight increase as a variable. The analysis reveals only small mission performance gains as the aerodynamic improvements are negated by weight penalties. A new workflow for decision-making is presented that allows to estimate if a change in landing gear configuration is beneficial for a small UAV.},
  language  = {en}
}
@article{GoettenFinger2020,
  author    = {G{\"o}tten, Falk and Finger, Felix},
  title     = {PhoenAIX - Die modulare Transportdrohne},
  series = {Ingenieurspiegel},
  volume    = {2020},
  journal   = {Ingenieurspiegel},
  number    = {1},
  publisher = {Public Verlag},
  address   = {Bingen},
  isbn      = {1868-5919},
  pages     = {38 -- 40},
  year      = {2020},
  abstract  = {Die autonome, unbemannte Luftfahrt ist einer der Schl{\"u}sselsektoren f{\"u}r die Zukunft der Luftfahrt. In diesem rasant wachsenden Bereich nehmen senkrecht startende und senkrecht landende Flugzeuge (Vertical Take-Off and Landing - VTOL) einen besonderen Platz ein. Ein VTOL-Flugzeug (manchmal auch „Transitionsflugger{\"a}t" genannt) verbindet die Eigenschaft des Helikopters, {\"u}berall starten und landen zu k{\"o}nnen, mit den Geschwindigkeits-, Reichweiten und Flugdauervorteilen des Starrfl{\"u}glers. Grunds{\"a}tzlich wird die Senkrechtstart- und -landef{\"a}higkeit sowohl von zivilen als auch von milit{\"a}rischen Betreibern unbemannter Flugger{\"a}te (UAVs) gew{\"u}nscht. Trotzdem bietet der Markt nur eine geringe Anzahl von VTOL-UAVs, da qualitativ hochwertige Entw{\"u}rfe eine ausgesprochene Herausforderung in der Entwicklung darstellen. An der FH Aachen wird deshalb seit {\"u}ber 5 Jahren an der Auslegung und Analyse von solchen unbemannten VTOL Flugzeugen geforscht. Das neuste Projekt ist der Eigenentwurf einer großen, senkrechtstartenden Transportdrohne. Das „PhoenAIX" getaufte Flugger{\"a}t wird von Falk G{\"o}tten und Felix Finger im Rahmen einer EFRE-F{\"o}rderung entwickelt.},
  language  = {de}
}
@article{GoergensGreubelMoosdorf2013,
  author    = {G{\"o}rgens, Stefan and Greubel, Steffen and Moosdorf, Andreas},
  title     = {How to mobilize 20,000 people: Perspectives on retail and consumer goods},
  pages     = {52 -- 58},
  year      = {2013},
  language  = {en}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@article{GoeddekeStrzodkaMohdYusofetal.2007,
  author    = {G{\"o}ddeke, Dominik and Strzodka, Robert and Mohd-Yusof, Jamaludin and McCormick, Patrick and Buijssen, Sven H.M. and Grajewski, Matthias and Turek, Stefan},
  title     = {Exploring weak scalability for FEM calculations on a GPU-enhanced cluster},
  series = {Parallel Computing},
  volume    = {33},
  journal   = {Parallel Computing},
  number    = {10-11},
  issn      = {0167-8191},
  doi       = {10.1016/j.parco.2007.09.002},
  pages     = {685 -- 699},
  year      = {2007},
  language  = {en}
}
@article{GutheilBergGrotendorst2012,
  author    = {Gutheil, Inge and Berg, Tommy and Grotendorst, Johannes},
  title     = {Performance Analysis of Parallel Eigensolvers of two Libraries on BlueGene/P},
  series = {Journal of Mathematics and Systems Science},
  volume    = {2},
  journal   = {Journal of Mathematics and Systems Science},
  number    = {4},
  publisher = {David Publishing},
  address   = {Libertyville},
  issn      = {2159-5291},
  doi       = {10.17265/2159-5291/2012.04.003},
  pages     = {231 -- 236},
  year      = {2012},
  abstract  = {Many applications in computational science and engineering require the computation of eigenvalues and vectors of dense symmetric or Hermitian matrices. For example, in DFT (density functional theory) calculations on modern supercomputers 10\% to 30\% of the eigenvalues and eigenvectors of huge dense matrices have to be calculated. Therefore, performance and parallel scaling of the used eigensolvers is of upmost interest. In this article different routines of the linear algebra packages ScaLAPACK and Elemental for parallel solution of the symmetric eigenvalue problem are compared concerning their performance on the BlueGene/P supercomputer. Parameters for performance optimization are adjusted for the different data distribution methods used in the two libraries. It is found that for all test cases the new library Elemental which uses a two-dimensional element by element distribution of the matrices to the processors shows better performance than the old ScaLAPACK library which uses a block-cyclic distribution.},
  language  = {en}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel photoexcitation method for light-addressable potentiometric sensor with higher spatial resolution},
  series = {Applied physics express : APEX},
  volume    = {7},
  journal   = {Applied physics express : APEX},
  number    = {6},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1882-0786 (E-Journa); 1882-0778 (Print)},
  doi       = {10.7567/APEX.7.067301},
  pages     = {067301-4},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) is proposed to achieve a higher spatial resolution of chemical images. The proposed method employs a combined light source that consists of a modulated light probe, which generates the alternating photocurrent signal, and a ring of constant illumination surrounding it. The constant illumination generates a sheath of carriers with increased concentration which suppresses the spread of photocarriers by enhanced recombination. A device simulation was carried out to verify the effect of constant illumination on the spatial resolution, which demonstrated that a higher spatial resolution can be obtained.},
  language  = {en}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor with a novel photoexcitation method for a higher spatial resolution},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.369},
  pages     = {456 -- 459},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) realized a higher spatial resolution of chemical imaging. In this method, a modulated light probe, which generates the alternating photocurrent signal, is surrounded by a ring of constant light, which suppresses the lateral diffusion of photocarriers by enhancing recombination. A device simulation verified that a higher spatial resolution could be obtained by adjusting the gap between the modulated and constant light. It was also found that a higher intensity and a longer wavelength of constant light was more effective. However, there exists a tradeoff between the spatial resolution and the amplitude of the photocurrent, and thus, the signal-to-noise ratio. A tilted incidence of constant light was applied, which could achieve even higher resolution with a smaller loss of photocurrent.},
  language  = {en}
}
@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Theoretical study and simulation of light-addressable potentiometric sensors},
  series = {Physica status solidi (A) : applications and materials},
  volume    = {211},
  journal   = {Physica status solidi (A) : applications and materials},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0031-8965},
  doi       = {10.1002/pssa.201330354},
  pages     = {1467 -- 1472},
  year      = {2014},
  abstract  = {The light-addressable potentiometric sensor (LAPS) is a semiconductor-based potentiometric sensor using a light probe with an ability of detecting the concentration of biochemical species in a spatially resolved manner. As an important biomedical sensor, research has been conducted to improve its performance, for instance, to realize high-speed measurement. In this work, the idea of facilitating the device-level simulation, instead of using an equivalent-circuit model, is presented for detailed analysis and optimization of the performance of the LAPS. Both carrier distribution and photocurrent response have been simulated to provide new insight into both amplitude-mode and phase-mode operations of the LAPS. Various device parameters can be examined to effectively design and optimize the LAPS structures and setups for enhanced performance.},
  language  = {en}
}
@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor for the investigation of the spatial resolution},
  series = {Sensors and actuators B: Chemical},
  volume    = {204},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.08.016},
  pages     = {659 -- 665},
  year      = {2014},
  abstract  = {As a semiconductor-based electrochemical sensor, the light-addressable potentiometric sensor (LAPS) can realize two dimensional visualization of (bio-)chemical reactions at the sensor surface addressed by localized illumination. Thanks to this imaging capability, various applications in biochemical and biomedical fields are expected, for which the spatial resolution is critically significant. In this study, therefore, the spatial resolution of the LAPS was investigated in detail based on the device simulation. By calculating the spatiotemporal change of the distributions of electrons and holes inside the semiconductor layer in response to a modulated illumination, the photocurrent response as well as the spatial resolution was obtained as a function of various parameters such as the thickness of the Si substrate, the doping concentration, the wavelength and the intensity of illumination. The simulation results verified that both thinning the semiconductor substrate and increasing the doping concentration could improve the spatial resolution, which were in good agreement with known experimental results and theoretical analysis. More importantly, new findings of interests were also obtained. As for the dependence on the wavelength of illumination, it was found that the known dependence was not always the case. When the Si substrate was thick, a longer wavelength resulted in a higher spatial resolution which was known by experiments. When the Si substrate was thin, however, a longer wavelength of light resulted in a lower spatial resolution. This finding was explained as an effect of raised concentration of carriers, which reduced the thickness of the space charge region. The device simulation was found to be helpful to understand the relationship between the spatial resolution and device parameters, to understand the physics behind it, and to optimize the device structure and measurement conditions for realizing higher performance of chemical imaging systems.},
  language  = {en}
}
@article{GunSchoeningAbouzaretal.2008,
  author    = {Gun, Jenny and Sch{\"o}ning, Michael Josef and Abouzar, Maryam H. and Poghossian, Arshak and Katz, Evgeny},
  title     = {Field-Effect Nanoparticle-Based Glucose Sensor on a Chip: Amplification Effect of Coimmobilized Redox Species},
  series = {Electroanalysis. 20 (2008), H. 16},
  journal   = {Electroanalysis. 20 (2008), H. 16},
  isbn      = {1521-4109},
  pages     = {1748 -- 1753},
  year      = {2008},
  language  = {en}
}
@article{GunRizkovLevetal.2008,
  author    = {Gun, Jenny and Rizkov, Dan and Lev, Ovadia and Abouzar, Maryam H. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Oxygen plasma-treated gold nanoparticle-based field-effect devices as transducer structures for bio-chemical sensing},
  series = {Microchimica Acta. 164 (2008), H. 3-4},
  journal   = {Microchimica Acta. 164 (2008), H. 3-4},
  isbn      = {1436-5073},
  pages     = {395 -- 404},
  year      = {2008},
  language  = {en}
}
@article{GunGutkinLevetal.2011,
  author    = {Gun, Jenny and Gutkin, Vitaly and Lev, Ovadia and Boyen, Hans-Gerd and Saitner, Marc and Wagner, Patrick and Olieslaeger, Marc D´ and Abouzar, Maryam H. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Tracing gold nanoparticle charge by electrolyte-insulator-semiconductor devices},
  series = {Journal of Physical Chemistry C. 115 (2011), H. 11},
  journal   = {Journal of Physical Chemistry C. 115 (2011), H. 11},
  publisher = {American Cemical Society},
  address   = {Washington, DC},
  isbn      = {1932-7455},
  pages     = {4439 -- 4445},
  year      = {2011},
  language  = {en}
}
@article{GspandlPillReipetal.2011,
  author    = {Gspandl, Stephan and Pill, Ingo and Reip, Michael and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Belief Management for High-Level Robot Programs},
  series = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  journal   = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  pages     = {900 -- 905},
  year      = {2011},
  language  = {en}
}
@article{GruetersSenger1992,
  author    = {Gr{\"u}ters, Hugo and Senger, W.},
  title     = {Simulation des biomechanisch durch Energiedehnung stimulierten Knochenumbaus},
  series = {Biomedizinische Technik. 57 (1992), H. Erg{\"a}nzungsband 1},
  journal   = {Biomedizinische Technik. 57 (1992), H. Erg{\"a}nzungsband 1},
  isbn      = {0013-5585},
  pages     = {39 -- 41},
  year      = {1992},
  language  = {de}
}
@article{GruetersSavvidisLoeeretal.1991,
  author    = {Gr{\"u}ters, Hugo and Savvidis, E. and L{\"o}er, F. and Wiesener, C. H.},
  title     = {Analyse der Beanspruchung des proximalen Femur bei verschiedenen Arten der Belastung mit Hilfe der Finite-Element-Methode / Savvidis, E. ; L{\"o}er, F. ; Gr{\"u}ters, Hugo ; Wiesener, C. H.},
  series = {Zeitschrift f{\"u}r Orthop{\"a}die und ihre Grenzgebiete. 129 (1991), H. 3},
  journal   = {Zeitschrift f{\"u}r Orthop{\"a}die und ihre Grenzgebiete. 129 (1991), H. 3},
  isbn      = {1615-9586},
  pages     = {268 -- 277},
  year      = {1991},
  language  = {de}
}
@article{GruetersMueller1980,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, Carl Harald},
  title     = {Zur Berechnung der Schubspannungen in Klebverbindungen},
  series = {Automobil-Industrie. 25 (1980), H. 2},
  journal   = {Automobil-Industrie. 25 (1980), H. 2},
  isbn      = {0005-1306},
  pages     = {65 -- 67},
  year      = {1980},
  language  = {de}
}
@article{GruetersMuellerWillms1983,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H. and Willms, H.},
  title     = {Ein Beitrag zur Berechnung von Gusseigenspannungen in Rohren},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 63 (1983)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 63 (1983)},
  isbn      = {0044-2267},
  pages     = {T160 -- T163},
  year      = {1983},
  language  = {de}
}
@article{GruetersMueller1979,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H.},
  title     = {Experimentell-rechnerische Ermittlung von Eigenspannungen},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 59 (1979)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 59 (1979)},
  isbn      = {0044-2267},
  pages     = {T184 -- T186},
  year      = {1979},
  language  = {de}
}
@article{GruetersMueller1981,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H.},
  title     = {Anwendung der Cosseratschen Kontinuumstheorie auf den ebenen Verbundk{\"o}rper},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM. 61 (1981)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM. 61 (1981)},
  isbn      = {0044-2267},
  pages     = {T92 -- T94},
  year      = {1981},
  language  = {de}
}
@article{GruetersHiemenz1980,
  author    = {Gr{\"u}ters, Hugo and Hiemenz, C.},
  title     = {Berechnung des Verzugs und der Schwindung von PUR-Strukturschaumplatten},
  series = {Kunststoffe. 70 (1980), H. 4},
  journal   = {Kunststoffe. 70 (1980), H. 4},
  isbn      = {0023-5563},
  pages     = {228 -- 233},
  year      = {1980},
  language  = {de}
}