@article{GoettenFingerHavermannetal.2018,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bill, C.},
  title     = {On the flight performance impact of landing gear drag reduction methods for unmanned air vehicles},
  series = {Deutscher Luft- und Raumfahrtkongress 2018},
  journal   = {Deutscher Luft- und Raumfahrtkongress 2018},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/480058},
  pages     = {11 S.},
  year      = {2018},
  abstract  = {The flight performance impact of three different landing gear configurations on a small, fixed-wing UAV is analyzed with a combination of RANS CFD calculations and an incremental flight performance algorithm. A standard fixed landing gear configuration is taken as a baseline, while the influence of retracting the landing gear or applying streamlined fairings is investigated. A retraction leads to a significant parasite drag reduction, while also fairings promise large savings. The increase in lift-to-drag ratio is reduced at high lift coefficients due to the influence of induced drag. All configurations are tested on three different design missions with an incremental flight performance algorithm. A trade-off study is performed using the retracted or faired landing gear's weight increase as a variable. The analysis reveals only small mission performance gains as the aerodynamic improvements are negated by weight penalties. A new workflow for decision-making is presented that allows to estimate if a change in landing gear configuration is beneficial for a small UAV.},
  language  = {en}
}
@article{GoettenFinger2020,
  author    = {G{\"o}tten, Falk and Finger, Felix},
  title     = {PhoenAIX - Die modulare Transportdrohne},
  series = {Ingenieurspiegel},
  volume    = {2020},
  journal   = {Ingenieurspiegel},
  number    = {1},
  publisher = {Public Verlag},
  address   = {Bingen},
  isbn      = {1868-5919},
  pages     = {38 -- 40},
  year      = {2020},
  abstract  = {Die autonome, unbemannte Luftfahrt ist einer der Schl{\"u}sselsektoren f{\"u}r die Zukunft der Luftfahrt. In diesem rasant wachsenden Bereich nehmen senkrecht startende und senkrecht landende Flugzeuge (Vertical Take-Off and Landing - VTOL) einen besonderen Platz ein. Ein VTOL-Flugzeug (manchmal auch „Transitionsflugger{\"a}t" genannt) verbindet die Eigenschaft des Helikopters, {\"u}berall starten und landen zu k{\"o}nnen, mit den Geschwindigkeits-, Reichweiten und Flugdauervorteilen des Starrfl{\"u}glers. Grunds{\"a}tzlich wird die Senkrechtstart- und -landef{\"a}higkeit sowohl von zivilen als auch von milit{\"a}rischen Betreibern unbemannter Flugger{\"a}te (UAVs) gew{\"u}nscht. Trotzdem bietet der Markt nur eine geringe Anzahl von VTOL-UAVs, da qualitativ hochwertige Entw{\"u}rfe eine ausgesprochene Herausforderung in der Entwicklung darstellen. An der FH Aachen wird deshalb seit {\"u}ber 5 Jahren an der Auslegung und Analyse von solchen unbemannten VTOL Flugzeugen geforscht. Das neuste Projekt ist der Eigenentwurf einer großen, senkrechtstartenden Transportdrohne. Das „PhoenAIX" getaufte Flugger{\"a}t wird von Falk G{\"o}tten und Felix Finger im Rahmen einer EFRE-F{\"o}rderung entwickelt.},
  language  = {de}
}
@article{GoergensGreubelMoosdorf2013,
  author    = {G{\"o}rgens, Stefan and Greubel, Steffen and Moosdorf, Andreas},
  title     = {How to mobilize 20,000 people: Perspectives on retail and consumer goods},
  pages     = {52 -- 58},
  year      = {2013},
  language  = {en}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@article{GoeddekeStrzodkaMohdYusofetal.2007,
  author    = {G{\"o}ddeke, Dominik and Strzodka, Robert and Mohd-Yusof, Jamaludin and McCormick, Patrick and Buijssen, Sven H.M. and Grajewski, Matthias and Turek, Stefan},
  title     = {Exploring weak scalability for FEM calculations on a GPU-enhanced cluster},
  series = {Parallel Computing},
  volume    = {33},
  journal   = {Parallel Computing},
  number    = {10-11},
  issn      = {0167-8191},
  doi       = {10.1016/j.parco.2007.09.002},
  pages     = {685 -- 699},
  year      = {2007},
  language  = {en}
}
@article{GutheilBergGrotendorst2012,
  author    = {Gutheil, Inge and Berg, Tommy and Grotendorst, Johannes},
  title     = {Performance Analysis of Parallel Eigensolvers of two Libraries on BlueGene/P},
  series = {Journal of Mathematics and Systems Science},
  volume    = {2},
  journal   = {Journal of Mathematics and Systems Science},
  number    = {4},
  publisher = {David Publishing},
  address   = {Libertyville},
  issn      = {2159-5291},
  doi       = {10.17265/2159-5291/2012.04.003},
  pages     = {231 -- 236},
  year      = {2012},
  abstract  = {Many applications in computational science and engineering require the computation of eigenvalues and vectors of dense symmetric or Hermitian matrices. For example, in DFT (density functional theory) calculations on modern supercomputers 10\% to 30\% of the eigenvalues and eigenvectors of huge dense matrices have to be calculated. Therefore, performance and parallel scaling of the used eigensolvers is of upmost interest. In this article different routines of the linear algebra packages ScaLAPACK and Elemental for parallel solution of the symmetric eigenvalue problem are compared concerning their performance on the BlueGene/P supercomputer. Parameters for performance optimization are adjusted for the different data distribution methods used in the two libraries. It is found that for all test cases the new library Elemental which uses a two-dimensional element by element distribution of the matrices to the processors shows better performance than the old ScaLAPACK library which uses a block-cyclic distribution.},
  language  = {en}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel photoexcitation method for light-addressable potentiometric sensor with higher spatial resolution},
  series = {Applied physics express : APEX},
  volume    = {7},
  journal   = {Applied physics express : APEX},
  number    = {6},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1882-0786 (E-Journa); 1882-0778 (Print)},
  doi       = {10.7567/APEX.7.067301},
  pages     = {067301-4},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) is proposed to achieve a higher spatial resolution of chemical images. The proposed method employs a combined light source that consists of a modulated light probe, which generates the alternating photocurrent signal, and a ring of constant illumination surrounding it. The constant illumination generates a sheath of carriers with increased concentration which suppresses the spread of photocarriers by enhanced recombination. A device simulation was carried out to verify the effect of constant illumination on the spatial resolution, which demonstrated that a higher spatial resolution can be obtained.},
  language  = {en}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor with a novel photoexcitation method for a higher spatial resolution},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.369},
  pages     = {456 -- 459},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) realized a higher spatial resolution of chemical imaging. In this method, a modulated light probe, which generates the alternating photocurrent signal, is surrounded by a ring of constant light, which suppresses the lateral diffusion of photocarriers by enhancing recombination. A device simulation verified that a higher spatial resolution could be obtained by adjusting the gap between the modulated and constant light. It was also found that a higher intensity and a longer wavelength of constant light was more effective. However, there exists a tradeoff between the spatial resolution and the amplitude of the photocurrent, and thus, the signal-to-noise ratio. A tilted incidence of constant light was applied, which could achieve even higher resolution with a smaller loss of photocurrent.},
  language  = {en}
}
@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Theoretical study and simulation of light-addressable potentiometric sensors},
  series = {Physica status solidi (A) : applications and materials},
  volume    = {211},
  journal   = {Physica status solidi (A) : applications and materials},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0031-8965},
  doi       = {10.1002/pssa.201330354},
  pages     = {1467 -- 1472},
  year      = {2014},
  abstract  = {The light-addressable potentiometric sensor (LAPS) is a semiconductor-based potentiometric sensor using a light probe with an ability of detecting the concentration of biochemical species in a spatially resolved manner. As an important biomedical sensor, research has been conducted to improve its performance, for instance, to realize high-speed measurement. In this work, the idea of facilitating the device-level simulation, instead of using an equivalent-circuit model, is presented for detailed analysis and optimization of the performance of the LAPS. Both carrier distribution and photocurrent response have been simulated to provide new insight into both amplitude-mode and phase-mode operations of the LAPS. Various device parameters can be examined to effectively design and optimize the LAPS structures and setups for enhanced performance.},
  language  = {en}
}
@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor for the investigation of the spatial resolution},
  series = {Sensors and actuators B: Chemical},
  volume    = {204},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.08.016},
  pages     = {659 -- 665},
  year      = {2014},
  abstract  = {As a semiconductor-based electrochemical sensor, the light-addressable potentiometric sensor (LAPS) can realize two dimensional visualization of (bio-)chemical reactions at the sensor surface addressed by localized illumination. Thanks to this imaging capability, various applications in biochemical and biomedical fields are expected, for which the spatial resolution is critically significant. In this study, therefore, the spatial resolution of the LAPS was investigated in detail based on the device simulation. By calculating the spatiotemporal change of the distributions of electrons and holes inside the semiconductor layer in response to a modulated illumination, the photocurrent response as well as the spatial resolution was obtained as a function of various parameters such as the thickness of the Si substrate, the doping concentration, the wavelength and the intensity of illumination. The simulation results verified that both thinning the semiconductor substrate and increasing the doping concentration could improve the spatial resolution, which were in good agreement with known experimental results and theoretical analysis. More importantly, new findings of interests were also obtained. As for the dependence on the wavelength of illumination, it was found that the known dependence was not always the case. When the Si substrate was thick, a longer wavelength resulted in a higher spatial resolution which was known by experiments. When the Si substrate was thin, however, a longer wavelength of light resulted in a lower spatial resolution. This finding was explained as an effect of raised concentration of carriers, which reduced the thickness of the space charge region. The device simulation was found to be helpful to understand the relationship between the spatial resolution and device parameters, to understand the physics behind it, and to optimize the device structure and measurement conditions for realizing higher performance of chemical imaging systems.},
  language  = {en}
}
@article{GunSchoeningAbouzaretal.2008,
  author    = {Gun, Jenny and Sch{\"o}ning, Michael Josef and Abouzar, Maryam H. and Poghossian, Arshak and Katz, Evgeny},
  title     = {Field-Effect Nanoparticle-Based Glucose Sensor on a Chip: Amplification Effect of Coimmobilized Redox Species},
  series = {Electroanalysis. 20 (2008), H. 16},
  journal   = {Electroanalysis. 20 (2008), H. 16},
  isbn      = {1521-4109},
  pages     = {1748 -- 1753},
  year      = {2008},
  language  = {en}
}
@article{GunRizkovLevetal.2008,
  author    = {Gun, Jenny and Rizkov, Dan and Lev, Ovadia and Abouzar, Maryam H. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Oxygen plasma-treated gold nanoparticle-based field-effect devices as transducer structures for bio-chemical sensing},
  series = {Microchimica Acta. 164 (2008), H. 3-4},
  journal   = {Microchimica Acta. 164 (2008), H. 3-4},
  isbn      = {1436-5073},
  pages     = {395 -- 404},
  year      = {2008},
  language  = {en}
}
@article{GunGutkinLevetal.2011,
  author    = {Gun, Jenny and Gutkin, Vitaly and Lev, Ovadia and Boyen, Hans-Gerd and Saitner, Marc and Wagner, Patrick and Olieslaeger, Marc D´ and Abouzar, Maryam H. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Tracing gold nanoparticle charge by electrolyte-insulator-semiconductor devices},
  series = {Journal of Physical Chemistry C. 115 (2011), H. 11},
  journal   = {Journal of Physical Chemistry C. 115 (2011), H. 11},
  publisher = {American Cemical Society},
  address   = {Washington, DC},
  isbn      = {1932-7455},
  pages     = {4439 -- 4445},
  year      = {2011},
  language  = {en}
}
@article{GspandlPillReipetal.2011,
  author    = {Gspandl, Stephan and Pill, Ingo and Reip, Michael and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Belief Management for High-Level Robot Programs},
  series = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  journal   = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  pages     = {900 -- 905},
  year      = {2011},
  language  = {en}
}
@article{GruetersSenger1992,
  author    = {Gr{\"u}ters, Hugo and Senger, W.},
  title     = {Simulation des biomechanisch durch Energiedehnung stimulierten Knochenumbaus},
  series = {Biomedizinische Technik. 57 (1992), H. Erg{\"a}nzungsband 1},
  journal   = {Biomedizinische Technik. 57 (1992), H. Erg{\"a}nzungsband 1},
  isbn      = {0013-5585},
  pages     = {39 -- 41},
  year      = {1992},
  language  = {de}
}
@article{GruetersSavvidisLoeeretal.1991,
  author    = {Gr{\"u}ters, Hugo and Savvidis, E. and L{\"o}er, F. and Wiesener, C. H.},
  title     = {Analyse der Beanspruchung des proximalen Femur bei verschiedenen Arten der Belastung mit Hilfe der Finite-Element-Methode / Savvidis, E. ; L{\"o}er, F. ; Gr{\"u}ters, Hugo ; Wiesener, C. H.},
  series = {Zeitschrift f{\"u}r Orthop{\"a}die und ihre Grenzgebiete. 129 (1991), H. 3},
  journal   = {Zeitschrift f{\"u}r Orthop{\"a}die und ihre Grenzgebiete. 129 (1991), H. 3},
  isbn      = {1615-9586},
  pages     = {268 -- 277},
  year      = {1991},
  language  = {de}
}
@article{GruetersMueller1980,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, Carl Harald},
  title     = {Zur Berechnung der Schubspannungen in Klebverbindungen},
  series = {Automobil-Industrie. 25 (1980), H. 2},
  journal   = {Automobil-Industrie. 25 (1980), H. 2},
  isbn      = {0005-1306},
  pages     = {65 -- 67},
  year      = {1980},
  language  = {de}
}
@article{GruetersMuellerWillms1983,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H. and Willms, H.},
  title     = {Ein Beitrag zur Berechnung von Gusseigenspannungen in Rohren},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 63 (1983)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 63 (1983)},
  isbn      = {0044-2267},
  pages     = {T160 -- T163},
  year      = {1983},
  language  = {de}
}
@article{GruetersMueller1979,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H.},
  title     = {Experimentell-rechnerische Ermittlung von Eigenspannungen},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 59 (1979)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. 59 (1979)},
  isbn      = {0044-2267},
  pages     = {T184 -- T186},
  year      = {1979},
  language  = {de}
}
@article{GruetersMueller1981,
  author    = {Gr{\"u}ters, Hugo and M{\"u}ller, C. H.},
  title     = {Anwendung der Cosseratschen Kontinuumstheorie auf den ebenen Verbundk{\"o}rper},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM. 61 (1981)},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM. 61 (1981)},
  isbn      = {0044-2267},
  pages     = {T92 -- T94},
  year      = {1981},
  language  = {de}
}
@article{GruetersHiemenz1980,
  author    = {Gr{\"u}ters, Hugo and Hiemenz, C.},
  title     = {Berechnung des Verzugs und der Schwindung von PUR-Strukturschaumplatten},
  series = {Kunststoffe. 70 (1980), H. 4},
  journal   = {Kunststoffe. 70 (1980), H. 4},
  isbn      = {0023-5563},
  pages     = {228 -- 233},
  year      = {1980},
  language  = {de}
}
@article{GruetersHiemenz1980,
  author    = {Gr{\"u}ters, Hugo and Hiemenz, C.},
  title     = {Berechnung des Verzugs und der Schwindung von Profilen aus PUR-Strukturschaumstoff. Kriterien zur Herstellung von verzugsfreien Profilen},
  series = {Kunststoffe. 70 (1980), H. 2},
  journal   = {Kunststoffe. 70 (1980), H. 2},
  isbn      = {0023-5563},
  pages     = {102 -- 107},
  year      = {1980},
  language  = {de}
}
@article{GruetersHacklWillms1990,
  author    = {Gr{\"u}ters, Hugo and Hackl, K. and Willms, H.},
  title     = {Stress and strain analyses of rectangular glass plates for large deformations. Part 2. Calculation of fracture probabilities in rectangular plates under area load},
  series = {Glastechnische Berichte. 63 (1990), H. 4},
  journal   = {Glastechnische Berichte. 63 (1990), H. 4},
  isbn      = {0017-1085},
  pages     = {93 -- 95},
  year      = {1990},
  language  = {en}
}
@article{GruetersHacklWillms1990,
  author    = {Gr{\"u}ters, Hugo and Hackl, K. and Willms, H.},
  title     = {Stress and strain analyses of rectangular glass plates for large deformations. Part 1. Dimensioning of rectangular plates under surface load and/or line load.},
  series = {Glastechnische Berichte. 63 (1990), H. 3},
  journal   = {Glastechnische Berichte. 63 (1990), H. 3},
  isbn      = {0017-1085},
  pages     = {69 -- 77},
  year      = {1990},
  language  = {en}
}
@article{GruetersGitschner1981,
  author    = {Gr{\"u}ters, Hugo and Gitschner, H.-W.},
  title     = {Diffusionsbedingte Eigenspannungen (Quellspannungen) und Deformationszust{\"a}nde in anisotropen glasfaserverst{\"a}rkten Mehrschichten-Verbundwerkstoffen. Gitschner, H.-W.; Gr{\"u}ters, H.},
  series = {Kunststoffe. 71 (1981), H. 3},
  journal   = {Kunststoffe. 71 (1981), H. 3},
  isbn      = {0023-5563},
  pages     = {178 -- 183},
  year      = {1981},
  language  = {de}
}
@article{GruetersBlankDuerkopetal.1994,
  author    = {Gr{\"u}ters, Hugo and Blank, K. and D{\"u}rkop, D. and Durchholz, M.},
  title     = {Strength tests of flat glass by means of four-point bending. Blank, K.; D{\"u}rkop, D.; Durchholz, M.; Gr{\"u}ters, H.},
  series = {Glastechnische Berichte. Glass science and technology. 67 (1994), H. 1},
  journal   = {Glastechnische Berichte. Glass science and technology. 67 (1994), H. 1},
  isbn      = {0946-7475},
  pages     = {9 -- 15},
  year      = {1994},
  language  = {en}
}
@article{GruetersBlank1990,
  author    = {Gr{\"u}ters, Hugo and Blank, K.},
  title     = {Contribution to the size effect on the strength of flat glass. Blank, K.; Gr{\"u}ters, H.},
  series = {Glastechnische Berichte. 63 (1990), H. 5},
  journal   = {Glastechnische Berichte. 63 (1990), H. 5},
  isbn      = {0017-1085},
  pages     = {135 -- 140},
  year      = {1990},
  language  = {en}
}
@article{Grueters1992,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Biomechanisch begr{\"u}ndete Stimulation postoperativer Knochenumbauvorg{\"a}nge},
  series = {Biomedizinische Technik . 37 (1992), H. 5},
  journal   = {Biomedizinische Technik . 37 (1992), H. 5},
  isbn      = {0013-5585},
  pages     = {94 -- 98},
  year      = {1992},
  language  = {de}
}
@article{Grueters1975,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Ein Hinweis auf parametererregte Wankschwingungen von Kraftfahrzeugen},
  series = {Automobil-Industrie},
  volume    = {20},
  journal   = {Automobil-Industrie},
  number    = {4},
  publisher = {Vogel},
  address   = {W{\"u}rzburg},
  issn      = {0005-1306},
  pages     = {65 -- 67},
  year      = {1975},
  language  = {de}
}
@article{Grueters1979,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Eigenspannungen und Verkr{\"u}mmungen von Balken aus Hartschaum},
  series = {Automobil-Industrie. 24 (1979), H. 3},
  journal   = {Automobil-Industrie. 24 (1979), H. 3},
  isbn      = {0005-1306},
  pages     = {115 -- 123},
  year      = {1979},
  language  = {de}
}
@article{Grueters1992,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Ein thermoelastisches Modell zur Prognose postoperativer Knochenumbaubildungen},
  series = {Vortr{\"a}ge der 26. Jahrestagung der Deutschen Gesellschaft f{\"u}r Biomedizinische Technik e.V. Oktober 1992},
  journal   = {Vortr{\"a}ge der 26. Jahrestagung der Deutschen Gesellschaft f{\"u}r Biomedizinische Technik e.V. Oktober 1992},
  pages     = {7 -- 8},
  year      = {1992},
  language  = {de}
}
@article{Grueters1975,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Isotrope, homogene L{\"o}sung des anisotropen, inhomogenen Plattenproblems},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  volume    = {55},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  number    = {4 (Special Issue)},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {0044-2267},
  doi       = {10.1002/zamm.19750550405},
  pages     = {T91 -- T93},
  year      = {1975},
  language  = {de}
}
@article{Grueters1974,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Iterative L{\"o}sung von Lastspannungsproblemen in anisotropen K{\"o}rpern},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  volume    = {54},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  number    = {12},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {0044-2267},
  doi       = {10.1002/zamm.19740541230},
  pages     = {T79 -- T80},
  year      = {1974},
  language  = {de}
}
@article{Grueters1972,
  author    = {Gr{\"u}ters, Hugo},
  title     = {Berechnung des Spannungszustandes in homogenen Scheiben aus anisotrop-elastischem Material},
  series = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  volume    = {52},
  journal   = {Zeitschrift f{\"u}r angewandte Mathematik und Mechanik : ZAMM},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {0044-2267},
  doi       = {10.1002/zamm.19720521105},
  pages     = {T127 -- T128},
  year      = {1972},
  language  = {de}
}
@article{GraesslRenzHezeletal.2013,
  author    = {Gr{\"a}ßl, Andreas and Renz, Wolfgang and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and {\"O}zerdem, Celal and Rieger, Jan and Kellmann, Peter and Santoro, Davide and Lindel, Tomasz D. and Frauenrath, Tobias and Pfeiffer, Harald and Niendorf, Thoralf},
  title     = {Modular 32-channel transceiver coil array for cardiac MRI at 7.0T},
  series = {Magnetic Resonance in Medicine},
  volume    = {72},
  journal   = {Magnetic Resonance in Medicine},
  number    = {1},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24903},
  pages     = {276 -- 290},
  year      = {2013},
  abstract  = {Purpose To design and evaluate a modular transceiver coil array with 32 independent channels for cardiac MRI at 7.0T. Methods The modular coil array comprises eight independent building blocks, each containing four transceiver loop elements. Numerical simulations were used for B1+ field homogenization and radiofrequency (RF) safety validation. RF characteristics were examined in a phantom study. The array's suitability for accelerated high spatial resolution two-dimensional (2D) FLASH CINE imaging of the heart was examined in a volunteer study. Results Transmission field adjustments and RF characteristics were found to be suitable for the volunteer study. The signal-to-noise intrinsic to 7.0T together with the coil performance afforded a spatial resolution of 1.1 × 1.1 × 2.5 mm3 for 2D CINE FLASH MRI, which is by a factor of 6 superior to standardized CINE protocols used in clinical practice at 1.5T. The 32-channel transceiver array supports one-dimensional acceleration factors of up to R = 4 without impairing image quality significantly. Conclusion The modular 32-channel transceiver cardiac array supports accelerated and high spatial resolution cardiac MRI. The array is compatible with multichannel transmission and provides a technological basis for future clinical assessment of parallel transmission techniques at 7.0T.},
  language  = {en}
}
@article{GrundmannKramerGerhardt1989,
  author    = {Grundmann, Reinhard and Kramer, Carl and Gerhardt, Hans Joachim},
  title     = {Zonenabsaugung und Bel{\"u}ftung f{\"u}r eine Produktionshalle mit zeitweilig auftretender hoher Staubentwicklung},
  series = {DKV-Tagungsbericht, Deutscher K{\"a}lte- und Klimatechnischer Verein. 4 (1989)},
  journal   = {DKV-Tagungsbericht, Deutscher K{\"a}lte- und Klimatechnischer Verein. 4 (1989)},
  isbn      = {0172-8849},
  pages     = {981 -- 998},
  year      = {1989},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche - 2. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 4},
  isbn      = {0017-9906},
  pages     = {275 -- 281},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1991,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Einheitliche Darstellung von Str{\"o}mungsger{\"a}uschen. Beschreibung der Schalleistung und Darstellung einiger Str{\"o}mungsger{\"a}usche. 1. Teil.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 42 (1991), H. 3},
  isbn      = {0017-9906},
  pages     = {233 -- 238},
  year      = {1991},
  language  = {de}
}
@article{GrundmannKramer1995,
  author    = {Grundmann, Reinhard and Kramer, Carl},
  title     = {Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le \&\#61607; Entwurfskriterien f{\"u}r Aeroakustik-Windkan{\"a}le und M{\"o}glichkeiten zur Nachr{\"u}stung bestehender Windkan{\"a}le},
  series = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  journal   = {Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beitr{\"a}ge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye},
  publisher = {Expert-Verl.},
  address   = {Renningen-Malmsheim},
  isbn      = {3-8169-1190-0},
  pages     = {377 -- 394},
  year      = {1995},
  language  = {de}
}
@article{GrundmannKramerKonrath2001,
  author    = {Grundmann, Reinhard and Kramer, C. and Konrath, B.},
  title     = {Der Aeroakustik-Fahrzeugwindkanal von Ford.},
  series = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  journal   = {Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10},
  isbn      = {0001-2785},
  pages     = {932 -- 938},
  year      = {2001},
  language  = {de}
}
@article{GrundmannKramerHilge1986,
  author    = {Grundmann, Reinhard and Kramer, C. and Hilge, B.},
  title     = {Prinzipien und Entwurf von Anlagen zur W{\"a}rmebehandlung von Halbzeugen},
  pages     = {129 -- 146},
  year      = {1986},
  language  = {de}
}
@article{GrundmannGerhardt1996,
  author    = {Grundmann, Reinhard and Gerhardt, Hans Joachim},
  title     = {Hart im Wind - Windger{\"a}usche an Fassadenelementen},
  series = {db deutsche bauzeitung. 130 (1996), H. 8},
  journal   = {db deutsche bauzeitung. 130 (1996), H. 8},
  pages     = {96 -- 98},
  year      = {1996},
  language  = {de}
}
@article{GrundmannBommesKlaesetal.1995,
  author    = {Grundmann, Reinhard and Bommes, Leonhard and Klaes, Klaus and Kramer, Carl u.a.},
  title     = {Der Einfluß der Schaufelgestalt von Zentrifugall{\"u}ftern auf deren Leistung und Ger{\"a}uschpegel},
  series = {Noise Control Engineering Journal. 43 (1995), H. 4},
  journal   = {Noise Control Engineering Journal. 43 (1995), H. 4},
  isbn      = {0736-2501},
  pages     = {91 -- 101},
  year      = {1995},
  language  = {de}
}
@article{GrundmannBommes2004,
  author    = {Grundmann, Reinhard and Bommes, Leonhard},
  title     = {Analyse von Kennfeldern drallgesteuerter Radialventilatoren},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 8},
  isbn      = {0017-9906},
  pages     = {54 -- 62},
  year      = {2004},
  language  = {de}
}
@article{GrundmannBommesReinartz1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Reinartz, Dieter},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 2},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 7},
  isbn      = {0017-9906},
  pages     = {44 -- 50},
  year      = {1998},
  language  = {de}
}
@article{GrundmannBommesDieter1998,
  author    = {Grundmann, Reinhard and Bommes, Leonard and Dieter, Reinartz},
  title     = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 1},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5},
  isbn      = {0017-9906},
  pages     = {28 -- 37},
  year      = {1998},
  language  = {de}
}
@article{Grundmann2004,
  author    = {Grundmann, Reinhard},
  title     = {Raumlufttechnik, L{\"u}ftungstechnik, Klimatechnik, L{\"a}rm},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 12},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 55 (2004), H. 12},
  isbn      = {0017-9906},
  pages     = {46 -- 49},
  year      = {2004},
  language  = {de}
}
@article{Grundmann1993,
  author    = {Grundmann, Reinhard},
  title     = {Vergleich von Ger{\"a}uschmessung und -prognose nach VDI 3731},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 44 (1993), H. 8},
  isbn      = {0017-9906},
  pages     = {513 -- 516},
  year      = {1993},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Allgemeines Ger{\"a}uschgesetz und spezifische Schallkenngr{\"o}ßen.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  isbn      = {0017-9906},
  pages     = {437 -- 440},
  year      = {1992},
  language  = {de}
}
@article{Grundmann1990,
  author    = {Grundmann, Reinhard},
  title     = {{\"A}hnlichkeitsgesetze},
  series = {Ventilatoren : mit ausgew{\"a}hlten Probleml{\"o}sungen f{\"u}r den Ger{\"a}te- und Anlagenbau / Leonhard Bommes ...},
  journal   = {Ventilatoren : mit ausgew{\"a}hlten Probleml{\"o}sungen f{\"u}r den Ger{\"a}te- und Anlagenbau / Leonhard Bommes ...},
  publisher = {expert-Verl.},
  address   = {Ehningen bei B{\"o}blingen},
  isbn      = {3-8169-0426-2},
  pages     = {34 -- 88},
  year      = {1990},
  language  = {de}
}