@incollection{ButenwegGellert2009,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1 (12.2010)},
  series = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)},
  booktitle = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)},
  publisher = {Bauwerk},
  address   = {Berlin},
  isbn      = {978-3-89932-217-0},
  pages     = {299 -- 343},
  year      = {2009},
  language  = {de}
}
@article{ButenwegGellert2013,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Nichtlinearer Nachweis von Mauerwerksbauten},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 17},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201300575},
  pages     = {166 -- 171},
  year      = {2013},
  language  = {de}
}
@inproceedings{ButenwegGellert2008,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Displacement based design of masonry structures},
  series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  publisher = {University of Newcastle},
  address   = {Callaghan},
  organization    = {International Brick and Block Masonry Conference <14, 2008, Sydney>},
  isbn      = {978-19-2070-1-92-5},
  pages     = {1 -- 10},
  year      = {2008},
  language  = {en}
}
@article{ButenwegGellert2012,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200550},
  pages     = {247 -- 254},
  year      = {2012},
  abstract  = {Moderne Mauerwerksbauten m{\"u}ssen nach heutigen Anforderungen architektonisch, statisch, energetisch sowie schall- und brandschutztechnisch optimal ausgelegt sein. Aufgrund der Komplexit{\"a}t und engen Verzahnung der einzelnen Anforderungen ist eine integrale Geb{\"a}udeplanung zur Erzielung einer qualitativ hochwertigen Bauwerksl{\"o}sung unbedingt notwendig. Diese erfordert von den Fachplanern vertieftes Spezialwissen in den verschiedenen Bereichen, um insbesondere die Schnittstellen und Bauwerksdetails korrekt zu planen und auszuf{\"u}hren. Der Beitrag stellt die integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelbauweise mit L{\"o}sungen f{\"u}r wesentliche Detailpunkte vor},
  language  = {de}
}
@incollection{ButenwegGellert2007,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Berechnung und Bemessung von durch Erdbeben beanspruchten Mauerwerksbauten nach DIN 4149 (04.2005)},
  series = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)},
  booktitle = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)},
  publisher = {Werner Verlag},
  address   = {Berlin},
  isbn      = {3-9343-6938-3 ; 978-3-9343-6938-2},
  pages     = {363 -- 393},
  year      = {2007},
  language  = {de}
}
@inproceedings{ButenwegGajewskiThierauf1999,
  author    = {Butenweg, Christoph and Gajewski, R. and Thierauf, Georg},
  title     = {A practical approach for the optimum design of reinforced concrete structures},
  series = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  booktitle = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Edinburgh},
  organization    = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <3, 1999, Weimar>},
  isbn      = {0-94-8749-59-8},
  pages     = {245 -- 250},
  year      = {1999},
  language  = {en}
}
@article{ButenwegFaeckeFehlingetal.2010,
  author    = {Butenweg, Christoph and F{\"a}cke, Andreas and Fehling, Ekkehard and Gellert, Christoph and Gierga, Michael and Meyer, Udo and R{\"u}tschlin, Andreas H. and St{\"u}rz, Jochen},
  title     = {Energieeffizient und erdbebensicher Bauen mit monolithischem Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {14},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {1},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1432-3427},
  doi       = {10.1002/dama.201000456},
  pages     = {3 -- 9},
  year      = {2010},
  abstract  = {Moderne Bauwerke m{\"u}ssen heute eine hohe energetische Leistungsf{\"a}higkeit aufweisen und gleichzeitig alle einwirkenden Lasten sicher abtragen. Dies stellt insbesondere in Erdbebengebieten hohe Anforderungen an die verwendeten Baustoffe. Am baupraktischen Beispiel einer Doppelhaush{\"a}lfte wird demonstriert, dass die Symbiose aus energieeffizientem und gleichzeitig erdbebensicherem Bauen in der h{\"o}chsten deutschen Erdbebenzone mit monolithischem Ziegelmauerwerk gut realisierbar ist. Als Ziegelmauerwerk werden f{\"u}r die Außenw{\"a}nde w{\"a}rmetechnisch optimierte Hochlochziegel verwendet, die sowohl die Anforderungen der Energieeinsparverordnung 2009 als auch die Anforderungen an Mauerwerkbaustoffe nach den aktuellen Erdbebennormen erf{\"u}llen. Der Erdbebennachweis der Doppelhaush{\"a}lfte erfolgt mit einem nichtlinearen Nachweisverfahren, das f{\"u}r eine einfache praktische Anwendung programmtechnisch umgesetzt wurde. F{\"u}r den Nachweis wurden aus zyklischen Schubwandversuchen ermittelte Last-Verformungskurven verwendet. Das gesamte in Deutschland noch nicht normativ geregelte Nachweiskonzept wurde im Rahmen einer Zustimmung im Einzelfall gepr{\"u}ft und genehmigt.},
  language  = {de}
}
@article{ButenwegFehling2012,
  author    = {Butenweg, Christoph and Fehling, Ekkehard},
  title     = {Hintergrund f{\"u}r die vereinfachten Regeln bei Mauerwerksgeb{\"a}uden im Erdbebenfall},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200537},
  pages     = {127 -- 137},
  year      = {2012},
  abstract  = {Bei der Ausarbeitung des nationalen Anwendungsdokumentes zur DIN EN 1998-1 waren die in der ENV-Fassung enthaltenen vereinfachten Regeln im Lichte aktueller Forschungsergebnisse zu {\"u}berpr{\"u}fen und zu {\"u}berarbeiten. Die gleiche Aufgabe stellte sich auch f{\"u}r die Neufassung der DIN 4149. In beiden F{\"a}llen sind neben konstruktiven Regeln f{\"u}r die Art und Anordnung der zur Geb{\"a}udeaussteifung heranzuziehenden W{\"a}nde im Grundriss Tabellen enthalten, die unter bestimmten Bedingungen den Entfall eines rechnerischen Nachweises der Tragw{\"a}nde im Erdbebenfall erm{\"o}glichen. Dies ist f{\"u}r Schwachbebengebiete, wie sie in Deutschland und anderen L{\"a}ndern Mitteleuropas anzutreffen sind, sinnvoll, um unn{\"o}tigen Rechenaufwand sowie Probleme mit der F{\"u}hrbarkeit von Nachweisen so weit wie m{\"o}glich auszuschalten. Im vorliegenden Beitrag werden die Hintergr{\"u}nde der vereinfachten Regeln diskutiert und die Ergebnisse der Anwendung mit verschiedenen Rechenverfahren verglichen und bewertet.},
  language  = {de}
}
@article{ButenwegEbenauKarvaneketal.2003,
  author    = {Butenweg, Christoph and Ebenau, C. and Karvanek, E. and Thierauf, G.},
  title     = {Bautechnische Pr{\"u}fung und Bau{\"u}berwachung der Arena 'Auf Schalke'},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {Bd. 78},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {Nr. 5},
  issn      = {0005-6650},
  pages     = {215 -- 220},
  year      = {2003},
  language  = {de}
}
@incollection{ButenwegEbenau1996,
  author    = {Butenweg, Christoph and Ebenau, C.},
  title     = {Entwicklung eines objekt-orientierten FE-Programms},
  series = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96},
  booktitle = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-313504-2},
  pages     = {60 -- 65},
  year      = {1996},
  language  = {de}
}
@techreport{ButenwegDargelHoechstetal.2012,
  author    = {Butenweg, Christoph and Dargel, H.-J. and H{\"o}chst, T. and Holtschoppen, B. and Schwarz, R. and Sippel, M.},
  title     = {Der Lastfall Erdbeben im Anlagenbau : Leitfaden : Entwurf, Bemessung und Konstruktion von Tragwerken und Komponenten in der chemischen Industrie in Anlehnung an die DIN EN 1998-1},
  publisher = {Verband der Chemischen Industrie e.V.},
  address   = {Frankfurt},
  pages     = {20 S.},
  year      = {2012},
  language  = {de}
}
@article{ButenwegBursiPaolaccietal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Paolacci, Fabrizio and Marinković, Marko and Lanese, Igor and Nardin, Chiara and Quinci, Gianluca},
  title     = {Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing},
  series = {Engineering Structures},
  volume    = {243},
  journal   = {Engineering Structures},
  number    = {15},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2021.112681},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous substances. Nonetheless, current standards for seismic design of industrial facilities are considered inadequate to guarantee proper safety conditions against exceptional events entailing loss of containment and related consequences. On these premises, the SPIF project -Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities- was proposed within the framework of the European H2020 SERA funding scheme. In detail, the objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial multi-storey frame structure equipped with complex process components by means of shaking table tests. Along this main vein and in a performance-based design perspective, the issues investigated in depth are the interaction between a primary moment resisting frame (MRF) steel structure and secondary process components that influence the performance of the whole system; and a proper check of floor spectra predictions. The evaluation of experimental data clearly shows a favourable performance of the MRF structure, some weaknesses of local details due to the interaction between floor crossbeams and process components and, finally, the overconservatism of current design standards w.r.t. floor spectra predictions.},
  language  = {en}
}
@inproceedings{ButenwegBursiNardinetal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Nardin, Chiara and Lanese, Igor and Pavese, Alberto and Marinković, Marko and Paolacci, Fabrizio and Quinci, Gianluca},
  title     = {Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities},
  series = {Conference Proceedings: Pressure Vessels \& Piping Conference Vol.5},
  booktitle = {Conference Proceedings: Pressure Vessels \& Piping Conference Vol.5},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  isbn      = {9780791885352},
  doi       = {10.1115/PVP2021-61696},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed.},
  language  = {en}
}
@incollection{ButenwegBollenbeck2003,
  author    = {Butenweg, Christoph and Bollenbeck, S.},
  title     = {Mauerwerksbauten unter Erdbebenbelastung},
  series = {Bauwerke und Erdbeben},
  booktitle = {Bauwerke und Erdbeben},
  publisher = {Vieweg},
  address   = {Wiesbaden},
  isbn      = {3-528-02574-3},
  pages     = {385 -- 397},
  year      = {2003},
  language  = {de}
}
@incollection{ButenwegBollenbeck2003,
  author    = {Butenweg, Christoph and Bollenbeck, S.},
  title     = {Mauerwerksbauten},
  series = {Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen},
  booktitle = {Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {3-528-02574-3 (Print) ; 978-3-322-96831-9 (E-Book)},
  doi       = {10.1007/978-3-322-96831-9_7},
  pages     = {385 -- 397},
  year      = {2003},
  language  = {de}
}
@inproceedings{ButenwegBettziecheKuhlmannetal.2005,
  author    = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin},
  title     = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke},
  address   = {Dresden},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>},
  isbn      = {3-00-015456-6},
  pages     = {73 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{Butenweg2022,
  author    = {Butenweg, Christoph},
  title     = {Seismic design and evaluation of industrial facilities},
  series = {The Third European Conference on Earthquake Engineering and Seismology},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology},
  editor    = {Vacareanu, Radu and Ionescu, Constantin},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-15103-3},
  issn      = {2524-342X},
  doi       = {10.1007/978-3-031-15104-0},
  pages     = {449 -- 464},
  year      = {2022},
  abstract  = {Industrial facilities must be thoroughly designed to withstand seismic actions as they exhibit an increased loss potential due to the possibly wideranging damage consequences and the valuable process engineering equipment. Past earthquakes showed the social and political consequences of seismic damage to industrial facilities and sensitized the population and politicians worldwide for the possible hazard emanating from industrial facilities. However, a holistic approach for the seismic design of industrial facilities can presently neither be found in national nor in international standards. The introduction of EN 1998-4 of the new generation of Eurocode 8 will improve the normative situation with specific seismic design rules for silos, tanks and pipelines and secondary process components. The article presents essential aspects of the seismic design of industrial facilities based on the new generation of Eurocode 8 using the example of tank structures and secondary process components. The interaction effects of the process components with the primary structure are illustrated by means of the experimental results of a shaking table test of a three story moment resisting steel frame with different process components. Finally, an integrated approach of digital plant models based on building information modelling (BIM) and structural health monitoring (SHM) is presented, which provides not only a reliable decision-making basis for operation, maintenance and repair but also an excellent tool for rapid assessment of seismic damage.},
  language  = {en}
}
@inproceedings{Butenweg2012,
  author    = {Butenweg, Christoph},
  title     = {Eurocode 8 : Erdbebenauslegung von Tragwerken},
  series = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  booktitle = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  publisher = {Freunde des Inst. f{\"u}r Massivbau der TU},
  address   = {Darmstadt},
  organization    = {Darmst{\"a}dter Massivbauseminar <36, 2012>},
  pages     = {257 -- 272},
  year      = {2012},
  language  = {de}
}
@phdthesis{Butenweg2000,
  author    = {Butenweg, Christoph},
  title     = {Bemessung und Optimierung von Stahlbetontragwerken unter vorwiegend ruhender Belastung mit der Methode der finiten Elemente. (Fortschritt-Berichte VDI : Reihe 4, Bauingenieurwesen ; 160)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-316004-8},
  pages     = {XV, 130 S.},
  year      = {2000},
  language  = {de}
}
@misc{Butenweg1994,
  author    = {Butenweg, Christoph},
  title     = {Einsatz der Grafikbibliothek PEX zur Darstellung der Informationen aus Pre-Processing bei der Simulation von Grundwasserstr{\"o}mungen},
  year      = {1994},
  language  = {de}
}
@article{Butenweg2017,
  author    = {Butenweg, Christoph},
  title     = {Die neue Erdbebenfibel. Neue Hilfsmittel f{\"u}r die Leichtbetonindustrie},
  series = {Tagungsband 61. Ulmer Beton Tage 2017},
  journal   = {Tagungsband 61. Ulmer Beton Tage 2017},
  year      = {2017},
  language  = {de}
}
@article{Butenweg2010,
  author    = {Butenweg, Christoph},
  title     = {Bewertung der Erdbebensicherheit von bestehenden Bauwerken},
  series = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  volume    = {155},
  journal   = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  number    = {1-3 und 4-6},
  publisher = {{\"O}AIV},
  address   = {Wien},
  issn      = {0721-9415},
  pages     = {11 -- 17},
  year      = {2010},
  language  = {de}
}
@inproceedings{Butenweg2007,
  author    = {Butenweg, Christoph},
  title     = {Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung},
  series = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  booktitle = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  organization    = {D-A-CH Tagung <2007, Wien>},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {de}
}
@incollection{Butenweg2017,
  author    = {Butenweg, Christoph},
  title     = {Passt, wackelt und hat Luft: Mauerwerksbauten aus Leichtbeton in Erdbebengebieten},
  series = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren},
  booktitle = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren},
  publisher = {Bauverl.},
  address   = {G{\"u}tersloh},
  isbn      = {978-3-7625-3676-5},
  pages     = {136 -- 140},
  year      = {2017},
  language  = {de}
}
@inproceedings{Butenweg2021,
  author    = {Butenweg, Christoph},
  title     = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies},
  series = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  booktitle = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  editor    = {Kuzmanović, Vladan and Ignjatović, Ivan},
  publisher = {University of Belgrade},
  address   = {Belgrade},
  pages     = {67 -- 75},
  year      = {2021},
  abstract  = {Nowadays modern high-performance buildings and facilities are equipped with monitoring systems and sensors to control building characteristics like energy consumption, temperature pattern and structural safety. The visualization and interpretation of sensor data is typically based on simple spreadsheets and non-standardized user-oriented solutions, which makes it difficult for building owners, facility managers and decision-makers to evaluate and understand the data. The solution of this problem in the future are integrated BIM-Sensor approaches which allow the generation of BIM models incorporating all relevant information of monitoring systems. These approaches support both the dynamic visualization of key structural performance parameters, the effective long-term management of sensor data based on BIM and provide a user-friendly interface to communicate with various stakeholders. A major benefit for the end user is the use of the BIM software architecture, which is the future standard anyway. In the following, the application of the integrated BIM-Sensor approach is illustrated for a typical industrial facility as a part of an early warning and rapid response system for earthquake events currently developed in the research project "ROBUST" with financial support by the German Federal Ministry for Economic Affairs and Energy (BMWI).},
  language  = {en}
}
@article{BussmannEngelsFussetal.2000,
  author    = {Bussmann, N. and Engels, R. and Fuss, L. and Kemmerling, G. and Reinartz, R. and Langen, K.-J. and Schelten, J. and Ziemons, Karl},
  title     = {Performance measurement of a new high resolution detector system for I-131 thyroid studies},
  series = {2000 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  journal   = {2000 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  issn      = {1082-3654},
  pages     = {22/35 -- 22/37},
  year      = {2000},
  abstract  = {A 2-dimensional detector system for high resolution thyroid I-131 scintigraphy was developed. It has a sensitive area of 4 cm×4 cm and consists of a lead-collimator and an array of 10×10 EGO crystals combined with a position sensitive photomultiplier. The spatial resolution and the sensitivity of the detector has been measured and compared to two commercially available gamma-cameras. Furthermore first patient measurements have been carried out},
  language  = {de}
}
@incollection{BusseEschMuntaniol2015,
  author    = {Busse, Daniel and Esch, Thomas and Muntaniol, Roman},
  title     = {Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_18},
  pages     = {327 -- 343},
  year      = {2015},
  abstract  = {The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.},
  language  = {en}
}
@inproceedings{BuschkuehleSchuermannWollert2009,
  author    = {Buschk{\"u}hle, Peter and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration},
  series = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  booktitle = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  publisher = {Techn. Univ.},
  address   = {Ilmenau},
  isbn      = {978-3-938843-44-4},
  pages     = {95 -- 96},
  year      = {2009},
  language  = {en}
}
@article{BurmistrovaSobolevaMonakhova2021,
  author    = {Burmistrova, Natalia A. and Soboleva, Polina M. and Monakhova, Yulia},
  title     = {Is infrared spectroscopy combined with multivariate analysis a promising tool for heparin authentication?},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {194},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 113811},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2020.113811},
  year      = {2021},
  abstract  = {The investigation of the possibility to determine various characteristics of powder heparin (n = 115) was carried out with infrared spectroscopy. The evaluation of heparin samples included several parameters such as purity grade, distributing company, animal source as well as heparin species (i.e. Na-heparin, Ca-heparin, and heparinoids). Multivariate analysis using principal component analysis (PCA), soft independent modelling of class analogy (SIMCA), and partial least squares - discriminant analysis (PLS-DA) were applied for the modelling of spectral data. Different pre-processing methods were applied to IR spectral data; multiplicative scatter correction (MSC) was chosen as the most relevant. Obtained results were confirmed by nuclear magnetic resonance (NMR) spectroscopy. Good predictive ability of this approach demonstrates the potential of IR spectroscopy and chemometrics for screening of heparin quality. This approach, however, is designed as a screening tool and is not considered as a replacement for either of the methods required by USP and FDA.},
  language  = {en}
}
@misc{BurlageHoeraufKlandtetal.1998,
  author    = {Burlage, Thomas and H{\"o}rauf, Martin and Klandt, Michael and Wahle, Michael},
  title     = {Schwingungsd{\"a}mpfer : Offenlegungsschrift},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {14 S. : graph. Darst.},
  year      = {1998},
  language  = {de}
}
@article{BurkhardtSchwarzPanetal.2009,
  author    = {Burkhardt, Klaus and Schwarz, Sonja and Pan, Chengrui and Stelter, Felix and Kotliar, Konstantin and Eynatten, Maxilian von and Sollinger, Daniel and Lanzl, Ines and Heemann, Uwe and Baumann, Marcus},
  title     = {Myeloid-related protein 8/14 complex describes microcirculatory alterations in patients with type 2 diabetes and nephropathy},
  series = {Cardiovascular Diabetology},
  volume    = {8},
  journal   = {Cardiovascular Diabetology},
  number    = {10},
  publisher = {-},
  isbn      = {1475-2840},
  pages     = {1 -- 8},
  year      = {2009},
  language  = {en}
}
@inproceedings{BurgethKleefeldZhangetal.2022,
  author    = {Burgeth, Bernhard and Kleefeld, Andreas and Zhang, Eugene and Zhang, Yue},
  title     = {Towards Topological Analysis of Non-symmetric Tensor Fields via Complexification},
  series = {Discrete Geometry and Mathematical Morphology},
  booktitle = {Discrete Geometry and Mathematical Morphology},
  editor    = {Baudrier, {\´E}tienne and Naegel, Beno{\^i}t and Kr{\"a}henb{\"u}hl, Adrien and Tajine, Mohamed},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-19897-7},
  doi       = {10.1007/978-3-031-19897-7_5},
  pages     = {48 -- 59},
  year      = {2022},
  abstract  = {Fields of asymmetric tensors play an important role in many applications such as medical imaging (diffusion tensor magnetic resonance imaging), physics, and civil engineering (for example Cauchy-Green-deformation tensor, strain tensor with local rotations, etc.). However, such asymmetric tensors are usually symmetrized and then further processed. Using this procedure results in a loss of information. A new method for the processing of asymmetric tensor fields is proposed restricting our attention to tensors of second-order given by a 2x2 array or matrix with real entries. This is achieved by a transformation resulting in Hermitian matrices that have an eigendecomposition similar to symmetric matrices. With this new idea numerical results for real-world data arising from a deformation of an object by external forces are given. It is shown that the asymmetric part indeed contains valuable information.},
  language  = {en}
}
@misc{BurgethKleefeldNaegeletal.2020,
  author    = {Burgeth, Bernhard and Kleefeld, Andreas and Naegel, Beno{\^i}t and Perret, Benjamin},
  title     = {Editorial — Special Issue: ISMM 2019},
  series = {Mathematical Morphology - Theory and Applications},
  volume    = {4},
  journal   = {Mathematical Morphology - Theory and Applications},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Warschau},
  issn      = {2353-3390},
  doi       = {10.1515/mathm-2020-0200},
  pages     = {159 -- 161},
  year      = {2020},
  abstract  = {This editorial presents the Special Issue dedicated to the conference ISMM 2019 and summarizes the articles published in this Special Issue.},
  language  = {en}
}
@incollection{BurgerKirschMarcheretal.2014,
  author    = {Burger, Ulrich and Kirsch, Ansgar and Marcher, Thomas and H{\"o}ser, Sebastian},
  title     = {Geologisch-geotechnischer Planungsprozess von Tunnelbauten mit Schwerpunkt tiefliegender Tunnel},
  series = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7},
  booktitle = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7},
  publisher = {Ernst},
  address   = {Berlin},
  isbn      = {978-3-433-03051-6 ; 978-3-433-60335-2 ; 978-3-433-60508-0 ; 3-433-60508-4},
  pages     = {37 -- 62},
  year      = {2014},
  language  = {de}
}
@article{BurgerRumpfDoetal.2021,
  author    = {Burger, Ren{\´e} and Rumpf, Jessica and Do, Xuan Tung and Monakhova, Yulia and Diehl, Bernd W. K. and Rehahn, Matthias and Schulze, Margit},
  title     = {Is NMR combined with multivariate regression applicable for the molecular weight determination of randomly cross-linked polymers such as lignin?},
  series = {ACS Omega},
  volume    = {6},
  journal   = {ACS Omega},
  number    = {44},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {2470-1343},
  doi       = {10.1021/acsomega.1c03574},
  pages     = {29516 -- 29524},
  year      = {2021},
  abstract  = {The molecular weight properties of lignins are one of the key elements that need to be analyzed for a successful industrial application of these promising biopolymers. In this study, the use of 1H NMR as well as diffusion-ordered spectroscopy (DOSY NMR), combined with multivariate regression methods, was investigated for the determination of the molecular weight (Mw and Mn) and the polydispersity of organosolv lignins (n = 53, Miscanthus x giganteus, Paulownia tomentosa, and Silphium perfoliatum). The suitability of the models was demonstrated by cross validation (CV) as well as by an independent validation set of samples from different biomass origins (beech wood and wheat straw). CV errors of ca. 7-9 and 14-16\% were achieved for all parameters with the models from the 1H NMR spectra and the DOSY NMR data, respectively. The prediction errors for the validation samples were in a similar range for the partial least squares model from the 1H NMR data and for a multiple linear regression using the DOSY NMR data. The results indicate the usefulness of NMR measurements combined with multivariate regression methods as a potential alternative to more time-consuming methods such as gel permeation chromatography.},
  language  = {en}
}
@article{BurgerLindnerRumpfetal.2022,
  author    = {Burger, Ren{\´e} and Lindner, Simon and Rumpf, Jessica and Do, Xuan Tung and Diehl, Bernd W.K. and Rehahn, Matthias and Monakhova, Yulia and Schulze, Margit},
  title     = {Benchtop versus high field NMR: Comparable performance found for the molecular weight determination of lignin},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {212},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 114649},
  publisher = {Elsevier},
  address   = {New York, NY},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2022.114649},
  year      = {2022},
  abstract  = {Lignin is a promising renewable biopolymer being investigated worldwide as an environmentally benign substitute of fossil-based aromatic compounds, e.g. for the use as an excipient with antioxidant and antimicrobial properties in drug delivery or even as active compound. For its successful implementation into process streams, a quick, easy, and reliable method is needed for its molecular weight determination. Here we present a method using 1H spectra of benchtop as well as conventional NMR systems in combination with multivariate data analysis, to determine lignin's molecular weight (Mw and Mn) and polydispersity index (PDI). A set of 36 organosolv lignin samples (from Miscanthus x giganteus, Paulownia tomentosa and Silphium perfoliatum) was used for the calibration and cross validation, and 17 samples were used as external validation set. Validation errors between 5.6\% and 12.9\% were achieved for all parameters on all NMR devices (43, 60, 500 and 600 MHz). Surprisingly, no significant difference in the performance of the benchtop and high-field devices was found. This facilitates the application of this method for determining lignin's molecular weight in an industrial environment because of the low maintenance expenditure, small footprint, ruggedness, and low cost of permanent magnet benchtop NMR systems.},
  language  = {en}
}
@article{BuniatyanMatirosyanAbouzaretal.2009,
  author    = {Buniatyan, Vahe V. and Matirosyan, N. and Abouzar, Maryam H. and Schubert, J. and Zander, W. and Gevorgian, S. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Capacitive field-effect pH sensor based on an electrolyte-ferroelectric-insulator-semiconductor structure},
  series = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V},
  journal   = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V},
  publisher = {AMA Service},
  address   = {Wunstorf},
  isbn      = {9783981099355},
  pages     = {317 -- 322},
  year      = {2009},
  language  = {en}
}
@article{BuniatyanAbouzarMartirosyanetal.2010,
  author    = {Buniatyan, Vahe V. and Abouzar, Maryam H. and Martirosyan, Norayr W. and Schubert, J{\"u}rgen and Gevorgian, Spartak and Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {pH-sensitive properties of barium strontium titanate (BST) thin films prepared by pulsed laser deposition technique},
  series = {Physica Status Solidi (A). 207 (2010), H. 4},
  journal   = {Physica Status Solidi (A). 207 (2010), H. 4},
  isbn      = {1862-6300},
  pages     = {824 -- 830},
  year      = {2010},
  language  = {en}
}
@article{BuniatyanMatirosyanAbouzaretal.2009,
  author    = {Buniatyan, V. V. and Matirosyan, N. W. and Abouzar, Maryam H. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Schubert, J. and Khachatryan, V. R. and Soukiassyan, G. R.},
  title     = {(Ba,Sr)TiO3 based electrolyte-insulator-semiconductor pHsensors: comparitive study},
  series = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  journal   = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  pages     = {71 -- 74},
  year      = {2009},
  language  = {en}
}
@inproceedings{BuniatyanHuckPoghossianetal.2014,
  author    = {Buniatyan, V. V. and Huck, Christina and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Rustamyan, L. G. and Hovnikyan, H. H.},
  title     = {Equivalent circuit and optimization of impedance characteristics of an electrolyte conductivity sensor},
  series = {Proceedings of State Engineering University Armenia : Series Information technologies, electronics, radio engineering},
  volume    = {Iss. 17},
  booktitle = {Proceedings of State Engineering University Armenia : Series Information technologies, electronics, radio engineering},
  number    = {No. 1},
  pages     = {69 -- 76},
  year      = {2014},
  language  = {en}
}
@article{BuniatyanHuckPoghossianetal.2013,
  author    = {Buniatyan, V. and Huck, Christina and Poghossian, Arshak and Aroutiounian, V. M. and Sch{\"o}ning, Michael Josef},
  title     = {BaxSr1-x TiO3/pc-Si heterojunction},
  series = {Armenian journal of physics},
  volume    = {6},
  journal   = {Armenian journal of physics},
  number    = {4},
  publisher = {National Academy of Sciences of Armenia},
  address   = {Yerevan},
  issn      = {1829-1171},
  pages     = {177 -- 187},
  year      = {2013},
  language  = {en}
}
@article{BuniatyanHuckPoghossianetal.2013,
  author    = {Buniatyan, V. and Huck, Christina and Poghossian, Arshak and Aroutiounian, V. M. and Sch{\"o}ning, Michael Josef},
  title     = {BaxSr1-x TiO3/pc-Si heterojunction capacitance},
  series = {Armenian journal of physics},
  volume    = {6},
  journal   = {Armenian journal of physics},
  number    = {4},
  publisher = {National Academy of Sciences of Armenia},
  address   = {Yerevan},
  issn      = {1829-1171},
  pages     = {188 -- 197},
  year      = {2013},
  language  = {en}
}
@inproceedings{BungValeroHermens2018,
  author    = {Bung, Daniel Bernhard and Valero, Daniel and Hermens, G.},
  title     = {Hybrid investigation on the hydraulic performance of a new trapezoidal fishway},
  series = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018},
  isbn      = {978-069213277-7},
  doi       = {10.15142/T3S06R},
  pages     = {184 -- 193},
  year      = {2018},
  language  = {de}
}
@inproceedings{BungValero2017,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {FlowCV - An open-source toolbox for computer vision applications in turbulent flows},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {5356 -- 5365},
  year      = {2017},
  language  = {en}
}
@inproceedings{BungValero2016,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {Application of the optical flow method to velocity determination in hydraulic structure models},
  series = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  booktitle = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  editor    = {Crookston, B. and Tullis, B.},
  isbn      = {978-1-884575-75-4},
  doi       = {10.15142/T3150628160853},
  pages     = {223 -- 232},
  year      = {2016},
  language  = {en}
}
@article{BungValero2018,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {Re-aeration on stepped spillways with special consideration of entrained and entrapped air},
  series = {Geosciences},
  volume    = {8},
  journal   = {Geosciences},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3263},
  pages     = {Article number 333},
  year      = {2018},
  abstract  = {As with most high-velocity free-surface flows, stepped spillway flows become self-aerated when the drop height exceeds a critical value. Due to the step-induced macro-roughness, the flow field becomes more turbulent than on a similar smooth-invert chute. For this reason, cascades are oftentimes used as re-aeration structures in wastewater treatment. However, for stepped spillways as flood release structures downstream of deoxygenated reservoirs, gas transfer is also of crucial significance to meet ecological requirements. Prediction of mass transfer velocities becomes challenging, as the flow regime differs from typical previously studied flow conditions. In this paper, detailed air-water flow measurements are conducted on stepped spillway models with different geometry, with the aim to estimate the specific air-water interface. Re-aeration performances are determined by applying the absorption method. In contrast to earlier studies, the aerated water body is considered a continuous mixture up to a level where 75\% air concentration is reached. Above this level, a homogenous surface wave field is considered, which is found to significantly affect the total air-water interface available for mass transfer. Geometrical characteristics of these surface waves are obtained from high-speed camera investigations. The results show that both the mean air concentration and the mean flow velocity have influence on the mass transfer. Finally, an empirical relationship for the mass transfer on stepped spillway models is proposed.},
  language  = {en}
}
@article{BungValero2016,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {Optical flow estimation in aerated flows},
  series = {Journal of Hydraulic Research},
  volume    = {54},
  journal   = {Journal of Hydraulic Research},
  number    = {5},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/00221686.2016.1173600},
  pages     = {575 -- 580},
  year      = {2016},
  abstract  = {Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn-Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn-Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150.},
  language  = {en}
}
@inproceedings{BungValero2016,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-31},
  pages     = {151 -- 157},
  year      = {2016},
  language  = {en}
}
@inproceedings{BungValero2015,
  author    = {Bung, Daniel Bernhard and Valero, Daniel},
  title     = {Image processing for bubble image velocimetry in self-aerated flows},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@inproceedings{BungTullis2018,
  author    = {Bung, Daniel Bernhard and Tullis, Blake},
  title     = {Hydraulic Structures - ISHS2018 in Perspective},
  series = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  isbn      = {978-0-692-13277-7},
  doi       = {10.15142/T3WH2B},
  pages     = {9 seiten},
  year      = {2018},
  language  = {en}
}