@inproceedings{RajanButenwegDalgueretal.2017,
  author    = {Rajan, S. and Butenweg, Christoph and Dalguer, L. A. and An, J. H. and Renault, P. and Klinkel, S.},
  title     = {Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013},
  series = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  year      = {2017},
  language  = {en}
}
@article{PoghossianWernerBuniatyanetal.2017,
  author    = {Poghossian, Arshak and Werner, Frederik and Buniatyan, V. V. and Wagner, Torsten and Miamoto, K. and Yoshinobu, T. and Sch{\"o}ning, Michael Josef},
  title     = {Towards addressability of light-addressable potentiometric sensors: Shunting effect of non-illuminated region and cross-talk},
  series = {Sensor and Actuators B: Chemical},
  journal   = {Sensor and Actuators B: Chemical},
  number    = {244},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.01.047},
  pages     = {1071 -- 1079},
  year      = {2017},
  abstract  = {The LAPS (light-addressable potentiometric sensor) platform is one of the most attractive approaches for chemical and biological sensing with many applications ranging from pH and ion/analyte concentration measurements up to cell metabolism detection and chemical imaging. However, although it is generally accepted that LAPS measurements are spatially resolved, the light-addressability feature of LAPS devices has not been discussed in detail so far. In this work, an extended electrical equivalent-circuit model of the LAPS has been presented, which takes into account possible cross-talk effects due to the capacitive coupling of the non-illuminated region. A shunting effect of the non-illuminated area on the measured photocurrent and addressability of LAPS devices has been studied. It has been shown, that the measured photocurrent will be determined not only by the local interfacial potential in the illuminated region but also by possible interfacial potential changes in the non-illuminated region, yielding cross-talk effects. These findings were supported by the experimental investigations of a penicillin-sensitive multi-spot LAPS and a metal-insulator-semiconductor LAPS as model systems.},
  language  = {en}
}
@incollection{PoghossianSchoening2017,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Nanomaterial-Modified Capacitive Field-Effect Biosensors},
  series = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  booktitle = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  doi       = {10.1007/5346_2017_2},
  pages     = {1 -- 25},
  year      = {2017},
  abstract  = {The coupling of charged molecules, nanoparticles, and more generally, inorganic/organic nanohybrids with semiconductor field-effect devices based on an electrolyte-insulator-semiconductor (EIS) system represents a very promising strategy for the active tuning of electrochemical properties of these devices and, thus, opening new opportunities for label-free biosensing by the intrinsic charge of molecules. The simplest field-effect sensor is a capacitive EIS sensor, which represents a (bio-)chemically sensitive capacitor. In this chapter, selected examples of recent developments in the field of label-free biosensing using nanomaterial-modified capacitive EIS sensors are summarized. In the first part, we present applications of EIS sensors modified with negatively charged gold nanoparticles for the label-free electrostatic detection of positively charged small proteins and macromolecules, for monitoring the layer-by-layer formation of oppositely charged polyelectrolyte (PE) multilayers as well as for the development of an enzyme-based biomolecular logic gate. In the second part, examples of a label-free detection by means of EIS sensors modified with a positively charged weak PE layer are demonstrated. These include electrical detection of on-chip and in-solution hybridized DNA (deoxyribonucleic acid) as well as an EIS sensor with pH-responsive weak PE/enzyme multilayers for enhanced field-effect biosensing.},
  language  = {en}
}
@article{PilasYaziciSelmeretal.2017,
  author    = {Pilas, Johanna and Yazici, Yasemen and Selmer, Thorsten and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Optimization of an amperometric biosensor array for simultaneous measurement of ethanol, formate, d- and l-lactate},
  series = {Electrochimica Acta},
  volume    = {251},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.07.119},
  pages     = {256 -- 262},
  year      = {2017},
  abstract  = {The immobilization of NAD+-dependent dehydrogenases, in combination with a diaphorase, enables the facile development of multiparametric sensing devices. In this work, an amperometric biosensor array for simultaneous determination of ethanol, formate, d- and l-lactate is presented. Enzyme immobilization on platinum thin-film electrodes was realized by chemical cross-linking with glutaraldehyde. The optimization of the sensor performance was investigated with regard to enzyme loading, glutaraldehyde concentration, pH, cofactor concentration and temperature. Under optimal working conditions (potassium phosphate buffer with pH 7.5, 2.5 mmol L-1 NAD+, 2.0 mmol L-1 ferricyanide, 25 °C and 0.4\% glutaraldehyde) the linear working range and sensitivity of the four sensor elements was improved. Simultaneous and cross-talk free measurements of four different metabolic parameters were performed successfully. The reliable analytical performance of the biosensor array was demonstrated by application in a clarified sample of inoculum sludge. Thereby, a promising approach for on-site monitoring of fermentation processes is provided.},
  language  = {en}
}
@incollection{PieperWaehlisch2017,
  author    = {Pieper, Martin and W{\"a}hlisch, Georg},
  title     = {Mehrwert von E-Learning durch f{\"a}cher{\"u}bergreifenden Einsatz},
  series = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  booktitle = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  publisher = {UVW Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  isbn      = {978-3-946017-05-9},
  pages     = {193 -- 196},
  year      = {2017},
  language  = {de}
}
@book{Pieper2017,
  author    = {Pieper, Martin},
  title     = {Mathematische Optimierung: Eine Einf{\"u}hrung in die kontinuierliche Optimierung mit Beispielen},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-16975-6},
  doi       = {10.1007/978-3-658-16975-6},
  pages     = {IX, 53 S. 20 Abb.},
  year      = {2017},
  language  = {de}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffSchmidtEnning2017,
  author    = {Pfaff, Raphael and Schmidt, B. D. and Enning, Manfred},
  title     = {Towards inclusion of the freight rail system in the industrial internet of things - Wagon 4.0},
  series = {Stephenson Conference, London, March 2017},
  booktitle = {Stephenson Conference, London, March 2017},
  pages     = {1 -- 10},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Apps f{\"u}r den G{\"u}terwagen? Wie der G{\"u}terwagen 4.0 die effiziente Integration der G{\"u}terbahn in ERTMS erm{\"o}glicht},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {de}
}
@inproceedings{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Analysis of Big Data Streams to obtain Braking Reliability Information for Train Protection systems},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@article{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Einsatz von Holzwerkstoffen in Fahrzeugstrukturen},
  series = {Bauen mit Holz},
  journal   = {Bauen mit Holz},
  number    = {3},
  publisher = {Bruderverlag},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  pages     = {32 -- 38},
  year      = {2017},
  language  = {de}
}
@inproceedings{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Holzwerkstoffe in Karosseriestrukturen},
  series = {Tagungsband Aachener Holzbautagung 2017},
  booktitle = {Tagungsband Aachener Holzbautagung 2017},
  editor    = {Uibel, Thormas and Peterson, Leif Arne and Baumann, Marcus},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2017},
  language  = {de}
}
@article{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple near-earth asteroid rendezvous mission: Solar-sailing options},
  series = {Advances in Space Research},
  journal   = {Advances in Space Research},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2017.10.017},
  year      = {2017},
  language  = {en}
}
@inproceedings{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple NEA rendezvous mission: Solar sailing options},
  series = {Fourth International Symposium on Solar Sailing},
  booktitle = {Fourth International Symposium on Solar Sailing},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58\% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.},
  language  = {en}
}
@article{OrzadaBitzJohstetal.2017,
  author    = {Orzada, Stephan and Bitz, Andreas and Johst, S{\"o}ren and Gratz, Marcel and V{\"o}lker, Maximilian N. and Kraff, Oliver and Abuelhaija, Ashraf and Fiedler, Thomas M. and Solbach, Klaus and Quick, Harald H. and Ladd, Mark E.},
  title     = {Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI},
  series = {Frontiers in Physics},
  volume    = {5},
  journal   = {Frontiers in Physics},
  number    = {Jun},
  issn      = {2296-424X},
  doi       = {10.3389/fphy.2017.00017},
  year      = {2017},
  language  = {en}
}
@article{OlbertzGroth2017,
  author    = {Olbertz, Klaus and Groth, Alexandra},
  title     = {{\"A}nderungen durch das Flexirentengesetz - Neue Anreize zur Besch{\"a}ftigung von Rentnern},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {10},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {738 -- 748},
  year      = {2017},
  language  = {de}
}
@article{OlbertzGroth2017,
  author    = {Olbertz, Klaus and Groth, Alexandra},
  title     = {Die Reform des Mutterschutzrechts - {\"U}berblick {\"u}ber die wesentlichen {\"A}nderungen},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {25},
  publisher = {NWB Verlag GmbH \& Co. KG},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {1883 -- 1891},
  year      = {2017},
  language  = {de}
}
@article{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Arbeitsrechtliche Aspekte beim Rechtsformwechsel},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {1868-1816},
  pages     = {314 -- 317},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Steuerliche Ber{\"u}cksichtigung von Zuzahlungen f{\"u}r Bereitschaftsdienstzeiten},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {145 -- 145},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Altersdiskriminierung bei altersabh{\"a}ngiger Staffelung der Urlaubsdauer},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {21 -- 21},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Doppelte Abfindung f{\"u}r Arbeitnehmer: Abfindung gem{\"a}ß \S 1 a KSchG und Abfindung gem{\"a}ß Sozialplan},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {62 -- 62},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Kettenbefristung bei Arbeitsvertr{\"a}gen - Institutioneller Rechtsmissbrauch},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {187 -- 187},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Unwirksamkeit von Allgemeinverbindlicherkl{\"a}rungen des Tarifvertrages {\"u}ber das Sozialkassenverfahren},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {204 -- 204},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Weitergeltung eines Haustarifvertrages bei Verschmelzung},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {128 -- 128},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Umwandlung eines unbefristeten in ein befristetes Arbeitsverh{\"a}ltnis},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {285 -- 285},
  year      = {2017},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Fortgeltung einer Gesamtbetriebsvereinbarung nach Betriebs{\"u}bergang},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {267 -- 267},
  year      = {2017},
  language  = {de}
}
@article{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Aufhebungsvertr{\"a}ge und Sperrzeit beim Bezug von Arbeitslosengeld - Neue Gestaltungsm{\"o}glichkeiten aufgrund ge{\"a}nderter Gesch{\"a}ftsanweisung der Bundesagentur f{\"u}r Arbeit},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {21},
  issn      = {1860-9449},
  pages     = {1588 -- 1593},
  year      = {2017},
  language  = {de}
}
@article{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Auswirkungen des neuen Entgelttransparenzgesetzes - Viel Aufwand f{\"u}r Unternehmen, wenig Greifbares f{\"u}r Arbeitnehmer},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {40},
  issn      = {1860-9449},
  pages     = {3068 -- 3075},
  year      = {2017},
  language  = {de}
}
@article{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Neuerungen beim Besch{\"a}ftigtendatenschutz durch die Neufassung des Bundesdatenschutzgesetzes - Unternehmen sollten Frist bis zum 25.5.2018 nutzen},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {32},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {2429 -- 2435},
  year      = {2017},
  language  = {de}
}
@inproceedings{OberlaenderArreolaHansenetal.2017,
  author    = {Oberl{\"a}nder, Jan and Arreola, Julio and Hansen, Christina and Greeff, Anton and Mayer, Marlena and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes},
  series = {MDPI Proceedings},
  volume    = {1},
  booktitle = {MDPI Proceedings},
  number    = {4},
  doi       = {10.3390/proceedings1040435},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}
@article{NoureddineKraffLaddetal.2017,
  author    = {Noureddine, Yacine and Kraff, Oliver and Ladd, Mark E. and Wrede, Karsten H. and Chen, Bixia and Quick, Harald H. and Schaefers, Gregor and Bitz, Andreas},
  title     = {In vitro and in silico assessment of RF-induced heating around intracranial aneurysm clips at 7 Tesla},
  series = {Magnetic Resonance in Medicine},
  journal   = {Magnetic Resonance in Medicine},
  number    = {Early view},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.26650},
  pages     = {14 Seiten},
  year      = {2017},
  language  = {en}
}
@misc{NobisrathZuendorfGeorgeetal.2017,
  author    = {Nobisrath, Ulrich and Z{\"u}ndorf, Albert and George, Tobias and Ruben, Jubeh and Kraft, Bodo},
  title     = {Software Stories Guide},
  pages     = {21},
  year      = {2017},
  abstract  = {Software Stories are a simple graphical notation for requirements analysis and design in agile software projects. Software Stories are based on example scenarios. Example scenarios facilitate the communication between lay people or domain experts and software experts.},
  language  = {en}
}
@book{NiethammerFissabre2017,
  author    = {Niethammer, Bernhard and Fissabre, Anke},
  title     = {Die Steiff Spielwarenfabrik in Giengen / Brenz : Ein unbekanntes Meisterwerk der fr{\"u}hen Moderne},
  publisher = {Geym{\"u}ller Verlag f{\"u}r Architektur},
  address   = {Aachen},
  isbn      = {978-3-943164-03-9},
  pages     = {64 S.},
  year      = {2017},
  language  = {de}
}
@incollection{NiemuellerZwillingLakemeyeretal.2017,
  author    = {Niemueller, Tim and Zwilling, Frederik and Lakemeyer, Gerhard and L{\"o}bach, Matthias and Reuter, Sebastian and Jeschke, Sabina and Ferrein, Alexander},
  title     = {Cyber-Physical System Intelligence},
  series = {Industrial Internet of Things},
  booktitle = {Industrial Internet of Things},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-42559-7},
  doi       = {10.1007/978-3-319-42559-7_17},
  pages     = {447 -- 472},
  year      = {2017},
  abstract  = {Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Improvements for a robust production in the RoboCup logistics league 2016},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_49},
  pages     = {589 -- 600},
  year      = {2017},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League},
  series = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  booktitle = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_53},
  pages     = {634 -- 642},
  year      = {2017},
  language  = {en}
}
@article{NiemuellerKarrasFerrein2017,
  author    = {Niemueller, Tim and Karras, Ulrich and Ferrein, Alexander},
  title     = {Meisterschaft der Maschinen: Die Industrial Logistic Liga},
  series = {C´t Magazin f{\"u}r Computertechnik},
  journal   = {C´t Magazin f{\"u}r Computertechnik},
  number    = {26},
  year      = {2017},
  language  = {de}
}
@incollection{NiemuellerLakemeyerReuteretal.2017,
  author    = {Niemueller, T. and Lakemeyer, G. and Reuter, S. and Jeschke, S. and Ferrein, Alexander},
  title     = {Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint},
  series = {Cyber-Physical Systems: Foundations, Principles and Applications},
  booktitle = {Cyber-Physical Systems: Foundations, Principles and Applications},
  publisher = {Academic Press},
  address   = {London},
  doi       = {10.1016/B978-0-12-803801-7.00013-4},
  pages     = {193 -- 207},
  year      = {2017},
  abstract  = {In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics. During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results. In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components.},
  language  = {de}
}
@article{NeuJanserKhatibietal.2017,
  author    = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.},
  title     = {Fully Automated Operational Modal Analysis using multi-stage clustering},
  series = {Mechanical Systems and Signal Processing},
  volume    = {Vol. 84, Part A},
  journal   = {Mechanical Systems and Signal Processing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0888-3270},
  doi       = {10.1016/j.ymssp.2016.07.031},
  pages     = {308 -- 323},
  year      = {2017},
  language  = {en}
}
@article{MuellerJungAhammer2017,
  author    = {M{\"u}ller, Wolfram and Jung, Alexander and Ahammer, Helmut},
  title     = {Advantages and problems of nonlinear methods applied to analyze physiological time signals: human balance control as an example},
  series = {Scientific Reports},
  volume    = {7},
  journal   = {Scientific Reports},
  number    = {Article number 2464},
  publisher = {Springer Nature},
  address   = {Cham},
  isbn      = {2045-2322},
  doi       = {10.1038/s41598-017-02665-5},
  pages     = {1 -- 11},
  year      = {2017},
  language  = {en}
}
@book{Muehl2017,
  author    = {M{\"u}hl, Thomas},
  title     = {Elektrische Messtechnik : Grundlagen, Messverfahren, Anwendungen},
  edition   = {5., {\"u}berarbeitete und erweiterte Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-15719-7},
  doi       = {10.1007/978-3-658-15720-3},
  pages     = {XVI, 306 Seiten, Illustrationen},
  year      = {2017},
  language  = {de}
}
@article{MuschallikMolinnusBongaertsetal.2017,
  author    = {Muschallik, Lukas and Molinnus, Denise and Bongaerts, Johannes and Pohl, Martina and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Siegert, Petra and Selmer, Thorsten},
  title     = {(R,R)-Butane-2,3-diol Dehydrogenase from Bacillus clausii DSM 8716T: Cloning and Expression of the bdhA-Gene, and Initial Characterization of Enzyme},
  series = {Journal of Biotechnology},
  volume    = {258},
  journal   = {Journal of Biotechnology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-1656},
  doi       = {10.1016/j.jbiotec.2017.07.020},
  pages     = {41 -- 50},
  year      = {2017},
  abstract  = {The gene encoding a putative (R,R)-butane-2,3-diol dehydrogenase (bdhA) from Bacillus clausii DSM 8716T was isolated, sequenced and expressed in Escherichia coli. The amino acid sequence of the encoded protein is only distantly related to previously studied enzymes (identity 33-43\%) and exhibited some uncharted peculiarities. An N-terminally StrepII-tagged enzyme variant was purified and initially characterized. The isolated enzyme catalyzed the (R)-specific oxidation of (R,R)- and meso-butane-2,3-diol to (R)- and (S)-acetoin with specific activities of 12 U/mg and 23 U/mg, respectively. Likewise, racemic acetoin was reduced with a specific activity of up to 115 U/mg yielding a mixture of (R,R)- and meso-butane-2,3-diol, while the enzyme reduced butane-2,3-dione (Vmax 74 U/mg) solely to (R,R)-butane-2,3-diol via (R)-acetoin. For these reactions only activity with the co-substrates NADH/NAD+ was observed. The enzyme accepted a selection of vicinal diketones, α-hydroxy ketones and vicinal diols as alternative substrates. Although the physiological function of the enzyme in B. clausii remains elusive, the data presented herein clearly demonstrates that the encoded enzyme is a genuine (R,R)-butane-2,3-diol dehydrogenase with potential for applications in biocatalysis and sensor development.},
  language  = {en}
}
@inproceedings{MoshiriKahakPfaffGaebeletal.2017,
  author    = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander},
  title     = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln},
  series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  pages     = {3 Seiten},
  year      = {2017},
  language  = {de}
}
@article{MoraisGomesSilvaetal.2017,
  author    = {Morais, Paulo V. and Gomes, Vanderley F., Jr. and Silva, Anielle C. A. and Dantas, Noelio O. and Sch{\"o}ning, Michael Josef and Siqueira, Jos{\´e} R., Jr.},
  title     = {Nanofilm of ZnO nanocrystals/carbon nanotubes as biocompatible layer for enzymatic biosensors in capacitive field-effect devices},
  series = {Journal of Materials Science},
  volume    = {52},
  journal   = {Journal of Materials Science},
  number    = {20},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-4803},
  doi       = {10.1007/s10853-017-1369-y},
  pages     = {12314 -- 12325},
  year      = {2017},
  abstract  = {The incorporation of nanomaterials that are biocompatible with different types of biological compounds has allowed the development of a new generation of biosensors applied especially in the biomedical field. In particular, the integration of film-based nanomaterials employed in field-effect devices can be interesting to develop biosensors with enhanced properties. In this paper, we studied the fabrication of sensitive nanofilms combining ZnO nanocrystals and carbon nanotubes (CNTs), prepared by means of the layer-by-layer (LbL) technique, in a capacitive electrolyte-insulator-semiconductor (EIS) structure for detecting glucose and urea. The ZnO nanocrystals were incorporated in a polymeric matrix of poly(allylamine) hydrochloride (PAH), and arranged with multi-walled CNTs in a LbL PAH-ZnO/CNTs film architecture onto EIS chips. The electrochemical characterizations were performed by capacitance-voltage and constant capacitance measurements, while the morphology of the films was characterized by atomic force microscopy. The enzymes glucose oxidase and urease were immobilized on film's surface for detection of glucose and urea, respectively. In order to obtain glucose and urea biosensors with optimized amount of sensitive films, we investigated the ideal number of bilayers for each detection system. The glucose biosensor showed better sensitivity and output signal for an LbL PAH-ZnO/CNTs nanofilm with 10 bilayers. On the other hand, the urea biosensor presented enhanced properties even for the first bilayer, exhibiting high sensitivity and output signal. The presence of the LbL PAH-ZnO/CNTs films led to biosensors with better sensitivity and enhanced response signal, demonstrating that the adequate use of nanostructured films is feasible for proof-of-concept biosensors with improved properties that may be employed for biomedical applications.},
  language  = {en}
}
@article{MolinnusPoghossianKeusgenetal.2017,
  author    = {Molinnus, Denise and Poghossian, Arshak and Keusgen, Michael and Katz, Evgeny and Sch{\"o}ning, Michael Josef},
  title     = {Coupling of Biomolecular Logic Gates with Electronic Transducers: From Single Enzyme Logic Gates to Sense/Act/Treat Chips},
  series = {Electroanalysis},
  volume    = {29},
  journal   = {Electroanalysis},
  number    = {8},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.201700208},
  pages     = {1840 -- 1849},
  year      = {2017},
  abstract  = {The integration of biomolecular logic principles with electronic transducers allows designing novel digital biosensors with direct electrical output, logically triggered drug-release, and closed-loop sense/act/treat systems. This opens new opportunities for advanced personalized medicine in the context of theranostics. In the present work, we will discuss selected examples of recent developments in the field of interfacing enzyme logic gates with electrodes and semiconductor field-effect devices. Special attention is given to an enzyme OR/Reset logic gate based on a capacitive field-effect electrolyte-insulator-semiconductor sensor modified with a multi-enzyme membrane. Further examples are a digital adrenaline biosensor based on an AND logic gate with binary YES/NO output and an integrated closed-loop sense/act/treat system comprising an amperometric glucose sensor, a hydrogel actuator, and an insulin (drug) sensor.},
  language  = {en}
}
@inproceedings{MolinnusHardtKaeveretal.2017,
  author    = {Molinnus, Denise and Hardt, Gabriel and K{\"a}ver, Larissa and Willenberg, Holger S. and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology},
  series = {MDPI Proceedings},
  booktitle = {MDPI Proceedings},
  doi       = {10.3390/proceedings1040506},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}