@article{HeroldBrandtSeibleretal.2008,
  author    = {Herold, Marco J. and Brandt, Jens van den and Seibler, Jost and Reichardt, Holger M.},
  title     = {Inducible and reversible gene silencing by stable integration of an shRNA-encoding lentivirus in transgenic rats},
  series = {Proceedings of the National Academy of Sciences of the United States of America},
  volume    = {105},
  journal   = {Proceedings of the National Academy of Sciences of the United States of America},
  number    = {47},
  issn      = {1091-6490},
  doi       = {10.1073/pnas.0806213105},
  pages     = {18507 -- 18512},
  year      = {2008},
  language  = {en}
}
@article{KotnikPopovaTodirasetal.2009,
  author    = {Kotnik, Katarina and Popova, Elena and Todiras, Mihail and Mori, Marcelo A. and Alenina, Natalia and Seibler, Jost and Bader, Michael},
  title     = {Inducible transgenic rat model for diabetes mellitus based on shRNA-mediated gene knockdown},
  series = {Plos One},
  volume    = {4},
  journal   = {Plos One},
  number    = {4},
  publisher = {Plos},
  address   = {San Francisco, California, US},
  doi       = {10.1371/journal.pone.0005124},
  pages     = {e5124},
  year      = {2009},
  language  = {en}
}
@article{PaulssenLeLengkeeketal.2013,
  author    = {Paulßen, Elisabeth and Le, Van So and Lengkeek, Nigel and Pellegrini, Paul and Jackson, Tim and Greguric, Ivan and Weiner, Ron},
  title     = {Influence of Metal Ions on the 68Ga-labeling of DOTATATE},
  series = {Applied Radiation and Isotopes},
  volume    = {82},
  journal   = {Applied Radiation and Isotopes},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9800},
  doi       = {10.1016/j.apradiso.2013.08.010},
  pages     = {232 -- 238},
  year      = {2013},
  language  = {en}
}
@article{ElBerguiAbouabdillahBouriougetal.2023,
  author    = {El Bergui, Omnia and Abouabdillah, Aziz and Bourioug, Mohamed and Schmitz, Dominik and Biel, Markus and Aboudrare, Abdellah and Krauss, Manuel and Jomaa, Ahlem and Romuli, Sebastian and M{\"u}ller, Joachim and Fagroud, Mustapha and Bouabid, Rachid},
  title     = {Innovative solutions for drought: Evaluating hydrogel application on onion cultivation (Allium cepa) in Morocco},
  series = {Water},
  volume    = {15},
  journal   = {Water},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/w15111972},
  pages     = {Artikel 1972},
  year      = {2023},
  abstract  = {Throughout the last decade, and particularly in 2022, water scarcity has become a critical concern in Morocco and other Mediterranean countries. The lack of rainfall during spring was worsened by a succession of heat waves during the summer. To address this drought, innovative solutions, including the use of new technologies such as hydrogels, will be essential to transform agriculture. This paper presents the findings of a study that evaluated the impact of hydrogel application on onion (Allium cepa) cultivation in Meknes, Morocco. The treatments investigated in this study comprised two different types of hydrogel-based soil additives (Arbovit® polyacrylate and Huminsorb® polyacrylate), applied at two rates (30 and 20 kg/ha), and irrigated at two levels of water supply (100\% and 50\% of daily crop evapotranspiration; ETc). Two control treatments were included, without hydrogel application and with both water amounts. The experiment was conducted in an open field using a completely randomized design. The results indicated a significant impact of both hydrogel-type dose and water dose on onion plant growth, as evidenced by various vegetation parameters. Among the hydrogels tested, Huminsorb® Polyacrylate produced the most favorable outcomes, with treatment T9 (100\%, HP, 30 kg/ha) yielding 70.55 t/ha; this represented an increase of 11 t/ha as compared to the 100\% ETc treatment without hydrogel application. Moreover, the combination of hydrogel application with 50\% ETc water stress showed promising results, with treatment T4 (HP, 30 kg, 50\%) producing almost the same yield as the 100\% ETc treatment without hydrogel while saving 208 mm of water.},
  language  = {en}
}
@article{UlberTippkoetterBuchholzetal.2008,
  author    = {Ulber, R. and Tippk{\"o}tter, Nils and Buchholz, H. and Demmer, W. and Scheper, T.},
  title     = {Innovative Verfahren in der Molkeaufarbeitung zur Gewinnung neuer Produkte},
  series = {Deutsche Milchwirtschaft},
  volume    = {59},
  journal   = {Deutsche Milchwirtschaft},
  number    = {19},
  issn      = {0012-0480},
  pages     = {704 -- 706},
  year      = {2008},
  language  = {de}
}
@article{BiselliThoemmesGarskeetal.1992,
  author    = {Biselli, Manfred and Th{\"o}mmes, J. and Garske, U. and Wandrey, Christian},
  title     = {Integrated detoxification: Reduction of ammonium concentration by dialysis with cation exchange membranes / Th{\"o}mmes, J. ; Garske, U. ; Biselli, M. ; Wandrey, C.},
  series = {Animal cell technology : developments, processes, and products ; ESACT, European Society for Animal Cell Technology, the 11th meeting / Ed. R. E. Spier},
  journal   = {Animal cell technology : developments, processes, and products ; ESACT, European Society for Animal Cell Technology, the 11th meeting / Ed. R. E. Spier},
  publisher = {Butterworth-Heinemann},
  address   = {Oxford},
  isbn      = {0750604212},
  pages     = {171 -- 175},
  year      = {1992},
  language  = {en}
}
@article{SchiedermeierRettnerHeilmannetal.2019,
  author    = {Schiedermeier, Maximilian and Rettner, Cornelius and Heilmann, Marcel and Schneider, Felix and Marz, Martin},
  title     = {Interference of automotive HV-DC-systems by traction voltage-source-inverters (VSI)},
  series = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  journal   = {2019 IEEE Transportation Electrification Conference (ITEC-India)},
  publisher = {IEEE},
  address   = {New York},
  doi       = {10.1109/ITEC-India48457.2019.ITECINDIA2019-37},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{ElbersBehnerRemmeetal.1986,
  author    = {Elbers, Gereon and Behner, T. and Remme, S. and Prissok, F.},
  title     = {Interstitial Metal Impurities as a Possible Cause of Enhanced Reactivities / T. Behner, G. Elbers, S. Remme, F. Prissok, P. Stegger, and G. Lehmann},
  series = {Berichte der Bunsen-Gesellschaft : physical chemistry, chemical physics. 90 (1986)},
  journal   = {Berichte der Bunsen-Gesellschaft : physical chemistry, chemical physics. 90 (1986)},
  isbn      = {0005-9021},
  pages     = {698},
  year      = {1986},
  language  = {en}
}
@article{CapitainWagnerHummeletal.2021,
  author    = {Capitain, Charlotte and Wagner, Sebastian and Hummel, Joana and Tippk{\"o}tter, Nils},
  title     = {Investigation of C-N Formation Between Catechols and Chitosan for the Formation of a Strong, Novel Adhesive Mimicking Mussel Adhesion},
  series = {Waste and Biomass Valorization},
  volume    = {12},
  journal   = {Waste and Biomass Valorization},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1877-265X},
  doi       = {10.1007/s12649-020-01110-5},
  pages     = {1761 -- 1779},
  year      = {2021},
  language  = {en}
}
@article{MangKolzMartinsetal.2006,
  author    = {Mang, Thomas and Kolz, J. and Martins, J. and Kremer, K.},
  title     = {Investigation of Elastomer Foams by Single-Sided NMR / Kolz, J. ; Martins, J. ; Kremer, K. ; Bl{\"u}mich, B. ; Mang, Thomas},
  series = {Kurzfassungen : 3. bis 6. Juli 2006, N{\"u}rnberg = Summaries / Deutsche Kautschuk Tagung, 3.7.-6.7.2006},
  journal   = {Kurzfassungen : 3. bis 6. Juli 2006, N{\"u}rnberg = Summaries / Deutsche Kautschuk Tagung, 3.7.-6.7.2006},
  publisher = {DKG, Dt. Kautschuk-Ges.},
  address   = {Frankfurt, Main},
  pages     = {33},
  year      = {2006},
  language  = {en}
}
@article{RaueWambachGloeggleretal.2014,
  author    = {Raue, Markus and Wambach, M. and Gl{\"o}ggler, S. and Grefen, Dana and Kaufmann, R. and Abetz, C. and Georgopanos, P. and Handge, U. A. and Mang, Thomas and Bl{\"u}mich, B. and Abetz, V.},
  title     = {Investigation of historical hard rubber ornaments of Charles Goodyear},
  series = {Macromolecular chemistry and physics},
  volume    = {Vol. 215},
  journal   = {Macromolecular chemistry and physics},
  number    = {No. 3},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1022-1352},
  pages     = {245 -- 254},
  year      = {2014},
  language  = {en}
}
@article{MangKolzHungeretal.2007,
  author    = {Mang, Thomas and Kolz, J. and Hunger, K. and Rath, S.},
  title     = {Investigation of self-diffusion processes in ionic hydrogels with a single-sided sensor / Kolz, J. ; Hunger, K. ; Rath, S. ; Mang, T. ; Bl{\"u}mich, B.},
  series = {Magnetic Resonance Imaging. 25 (2007), H. 4},
  journal   = {Magnetic Resonance Imaging. 25 (2007), H. 4},
  isbn      = {0730-725X},
  pages     = {566 -- 567},
  year      = {2007},
  language  = {en}
}
@article{MangKolzMartinsetal.2007,
  author    = {Mang, Thomas and Kolz, J. and Martins, J. and Kremer, K.},
  title     = {Investigation of the Elastomer-Foam Production with Single-Sided NMR / Kolz, J. ; Martins, J. ; Kremer, K. ; Mang, Thomas ; Bl{\"u}mich, B.},
  series = {Kautschuk Gummi Kunststoffe. 60 (2007), H. 4},
  journal   = {Kautschuk Gummi Kunststoffe. 60 (2007), H. 4},
  isbn      = {0948-3276},
  pages     = {179 -- 183},
  year      = {2007},
  language  = {en}
}
@article{BreuerMangSchoeningetal.2017,
  author    = {Breuer, Lars and Mang, Thomas and Sch{\"o}ning, Michael Josef and Thoelen, Ronald and Wagner, Torsten},
  title     = {Investigation of the spatial resolution of a laser-based stimulation process for light-addressable hydrogels with incorporated graphene oxide by means of IR thermography},
  series = {Sensors and Actuators A: Physical},
  volume    = {268},
  journal   = {Sensors and Actuators A: Physical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-4247},
  doi       = {10.1016/j.sna.2017.11.031},
  pages     = {126 -- 132},
  year      = {2017},
  language  = {en}
}
@article{ChristophBahrenbergVryetal.2008,
  author    = {Christoph, Thomas and Bahrenberg, Gregor and Vry, Jean de and Englberger, Werner and Erdmann, Volker A. and Frech, Moritz and K{\"o}gel, Babette and R{\"o}hl, Thomas and Schiene, Klaus and Schr{\"o}der, Wolfgang and Seibler, Jost and Kurreck, Jens},
  title     = {Investigation of TRPV1 loss-of-function phenotypes in transgenic shRNA expressing and knockout mice},
  series = {Molecular and Cellular Neuroscience},
  volume    = {37},
  journal   = {Molecular and Cellular Neuroscience},
  number    = {3},
  issn      = {1044-7431},
  doi       = {10.1016/j.mcn.2007.12.006},
  pages     = {579 -- 589},
  year      = {2008},
  language  = {en}
}
@article{FeuerriegelKlose1998,
  author    = {Feuerriegel, Uwe and Klose, W.},
  title     = {Investigations into the Mechanism of the Deactivation of a Palladium-Supported Catalyst by Hydrogen Sulfide Poisoning. Klose, W. ; Feuerriegel, U.},
  series = {Chemical engineering \& technology. 21 (1998), H. 7},
  journal   = {Chemical engineering \& technology. 21 (1998), H. 7},
  isbn      = {0930-7516},
  pages     = {562 -- 564},
  year      = {1998},
  language  = {en}
}
@article{BurmistrovaSobolevaMonakhova2021,
  author    = {Burmistrova, Natalia A. and Soboleva, Polina M. and Monakhova, Yulia},
  title     = {Is infrared spectroscopy combined with multivariate analysis a promising tool for heparin authentication?},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {194},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 113811},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2020.113811},
  year      = {2021},
  abstract  = {The investigation of the possibility to determine various characteristics of powder heparin (n = 115) was carried out with infrared spectroscopy. The evaluation of heparin samples included several parameters such as purity grade, distributing company, animal source as well as heparin species (i.e. Na-heparin, Ca-heparin, and heparinoids). Multivariate analysis using principal component analysis (PCA), soft independent modelling of class analogy (SIMCA), and partial least squares - discriminant analysis (PLS-DA) were applied for the modelling of spectral data. Different pre-processing methods were applied to IR spectral data; multiplicative scatter correction (MSC) was chosen as the most relevant. Obtained results were confirmed by nuclear magnetic resonance (NMR) spectroscopy. Good predictive ability of this approach demonstrates the potential of IR spectroscopy and chemometrics for screening of heparin quality. This approach, however, is designed as a screening tool and is not considered as a replacement for either of the methods required by USP and FDA.},
  language  = {en}
}
@article{BurgerRumpfDoetal.2021,
  author    = {Burger, Ren{\´e} and Rumpf, Jessica and Do, Xuan Tung and Monakhova, Yulia and Diehl, Bernd W. K. and Rehahn, Matthias and Schulze, Margit},
  title     = {Is NMR combined with multivariate regression applicable for the molecular weight determination of randomly cross-linked polymers such as lignin?},
  series = {ACS Omega},
  volume    = {6},
  journal   = {ACS Omega},
  number    = {44},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {2470-1343},
  doi       = {10.1021/acsomega.1c03574},
  pages     = {29516 -- 29524},
  year      = {2021},
  abstract  = {The molecular weight properties of lignins are one of the key elements that need to be analyzed for a successful industrial application of these promising biopolymers. In this study, the use of 1H NMR as well as diffusion-ordered spectroscopy (DOSY NMR), combined with multivariate regression methods, was investigated for the determination of the molecular weight (Mw and Mn) and the polydispersity of organosolv lignins (n = 53, Miscanthus x giganteus, Paulownia tomentosa, and Silphium perfoliatum). The suitability of the models was demonstrated by cross validation (CV) as well as by an independent validation set of samples from different biomass origins (beech wood and wheat straw). CV errors of ca. 7-9 and 14-16\% were achieved for all parameters with the models from the 1H NMR spectra and the DOSY NMR data, respectively. The prediction errors for the validation samples were in a similar range for the partial least squares model from the 1H NMR data and for a multiple linear regression using the DOSY NMR data. The results indicate the usefulness of NMR measurements combined with multivariate regression methods as a potential alternative to more time-consuming methods such as gel permeation chromatography.},
  language  = {en}
}
@article{LindnerBurgerRutledgeetal.2022,
  author    = {Lindner, Simon and Burger, Ren{\´e} and Rutledge, Douglas N. and Do, Xuan Tung and Rumpf, Jessica and Diehl, Bernd W. K. and Schulze, Margit and Monakhova, Yulia},
  title     = {Is the calibration transfer of multivariate calibration models between high- and low-field NMR instruments possible? A case study of lignin molecular weight},
  series = {Analytical chemistry},
  volume    = {94},
  journal   = {Analytical chemistry},
  number    = {9},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  isbn      = {1520-6882},
  doi       = {10.1021/acs.analchem.1c05125},
  pages     = {3997 -- 4004},
  year      = {2022},
  abstract  = {Although several successful applications of benchtop nuclear magnetic resonance (NMR) spectroscopy in quantitative mixture analysis exist, the possibility of calibration transfer remains mostly unexplored, especially between high- and low-field NMR. This study investigates for the first time the calibration transfer of partial least squares regressions [weight average molecular weight (Mw) of lignin] between high-field (600 MHz) NMR and benchtop NMR devices (43 and 60 MHz). For the transfer, piecewise direct standardization, calibration transfer based on canonical correlation analysis, and transfer via the extreme learning machine auto-encoder method are employed. Despite the immense resolution difference between high-field and low-field NMR instruments, the results demonstrate that the calibration transfer from high- to low-field is feasible in the case of a physical property, namely, the molecular weight, achieving validation errors close to the original calibration (down to only 1.2 times higher root mean square errors). These results introduce new perspectives for applications of benchtop NMR, in which existing calibrations from expensive high-field instruments can be transferred to cheaper benchtop instruments to economize.},
  language  = {en}
}
@article{KalbeKuropkaMeyerStorketal.1988,
  author    = {Kalbe, Jochen and Kuropka, Rolf and Meyer-Stork, L. Sebastian and Berndt, Heinz and [u.a.],},
  title     = {Isolation and characterization of high-molecular mass DNA from hair shafts},
  series = {Biological chemistry},
  volume    = {369},
  journal   = {Biological chemistry},
  number    = {1},
  isbn      = {0177-3593},
  doi       = {10.1515/bchm3.1988.369.1.413},
  pages     = {413 -- 416},
  year      = {1988},
  language  = {en}
}
@article{KotterRiekertWeyland1983,
  author    = {Kotter, Michael and Riekert, L. and Weyland, F.},
  title     = {Katalytische Abgasreinigung an Nichtedelmetall-Tr{\"a}gerkontakten},
  series = {Verfahrenstechnik : VT ; Informationen f{\"u}r Planung, Bau und Betrieb von Apparaten und Anlagen. 17 (1983)},
  journal   = {Verfahrenstechnik : VT ; Informationen f{\"u}r Planung, Bau und Betrieb von Apparaten und Anlagen. 17 (1983)},
  isbn      = {0049-5948},
  pages     = {607 -- 615},
  year      = {1983},
  language  = {de}
}
@article{Kotter1992,
  author    = {Kotter, Michael},
  title     = {Katalytische Abluftreinigung mit integriertem regenerativem W{\"a}rmetausch},
  series = {Chemie - Ingenieur - Technik. 64 (1992), H. 9},
  journal   = {Chemie - Ingenieur - Technik. 64 (1992), H. 9},
  isbn      = {0009-286X},
  pages     = {848},
  year      = {1992},
  language  = {de}
}
@article{KotterLintzTurek1992,
  author    = {Kotter, Michael and Lintz, Hans-G{\"u}nther and Turek, Thomas},
  title     = {Katalytische Stickoxid-Reduktion in einem rotierenden W{\"a}rme{\"u}bertrager},
  series = {Chemie - Ingenieur - Technik. 64 (1992), H. 5},
  journal   = {Chemie - Ingenieur - Technik. 64 (1992), H. 5},
  isbn      = {0009-286X},
  pages     = {446 -- 448},
  year      = {1992},
  language  = {de}
}
@article{SchererHoer1997,
  author    = {Scherer, Ulrich W. and H{\"o}r, G.},
  title     = {Kompartimentmodelle zur Quantifizierung des myokardialen Stoffwechsels mit PET / U. W. Scherer, G. H{\"o}r},
  series = {Kardiologische Nuklearmedizin / G. H{\"o}r [Hrsg.]},
  journal   = {Kardiologische Nuklearmedizin / G. H{\"o}r [Hrsg.]},
  publisher = {ecomed},
  address   = {Landsberg},
  isbn      = {3-609-62970-3},
  pages     = {179 -- 189},
  year      = {1997},
  language  = {de}
}
@article{SvaneborgKarimiVarzanehHojdisetal.2018,
  author    = {Svaneborg, Carsten and Karimi-Varzaneh, Hossein Ali and Hojdis, Nils and Fleck, Franz and Everaers, Ralf},
  title     = {Kremer-Grest Models for Universal Properties of Specific Common Polymer Species},
  series = {Soft Condensed Matter},
  journal   = {Soft Condensed Matter},
  number    = {1606.05008},
  year      = {2018},
  abstract  = {The Kremer-Grest (KG) bead-spring model is a near standard in Molecular Dynamic simulations of generic polymer properties. It owes its popularity to its computational efficiency, rather than its ability to represent specific polymer species and conditions. Here we investigate how to adapt the model to match the universal properties of a wide range of chemical polymers species. For this purpose we vary a single parameter originally introduced by Faller and M{\"u}ller-Plathe, the chain stiffness. Examples include polystyrene, polyethylene, polypropylene, cis-polyisoprene, polydimethylsiloxane, polyethyleneoxide and styrene-butadiene rubber. We do this by matching the number of Kuhn segments per chain and the number of Kuhn segments per cubic Kuhn volume for the polymer species and for the Kremer-Grest model. We also derive mapping relations for converting KG model units back to physical units, in particular we obtain the entanglement time for the KG model as function of stiffness allowing for a time mapping. To test these relations, we generate large equilibrated well entangled polymer melts, and measure the entanglement moduli using a static primitive-path analysis of the entangled melt structure as well as by simulations of step-strain deformation of the model melts. The obtained moduli for our model polymer melts are in good agreement with the experimentally expected moduli.},
  language  = {en}
}
@article{EveraersKarimiVarzanehFlecketal.2020,
  author    = {Everaers, Ralf and Karimi-Varzaneh, Hossein Ali and Fleck, Franz and Hojdis, Nils and Svaneborg, Carsten},
  title     = {Kremer-Grest Models for Commodity Polymer Melts: Linking Theory, Experiment, and Simulation at the Kuhn Scale},
  series = {Macromolecules},
  volume    = {53},
  journal   = {Macromolecules},
  number    = {6},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5835},
  doi       = {10.1021/acs.macromol.9b02428},
  pages     = {1901 -- 1916},
  year      = {2020},
  abstract  = {The Kremer-Grest (KG) polymer model is a standard model for studying generic polymer properties in molecular dynamics simulations. It owes its popularity to its simplicity and computational efficiency, rather than its ability to represent specific polymers species and conditions. Here we show that by tuning the chain stiffness it is possible to adapt the KG model to model melts of real polymers. In particular, we provide mapping relations from KG to SI units for a wide range of commodity polymers. The connection between the experimental and the KG melts is made at the Kuhn scale, i.e., at the crossover from the chemistry-specific small scale to the universal large scale behavior. We expect Kuhn scale-mapped KG models to faithfully represent universal properties dominated by the large scale conformational statistics and dynamics of flexible polymers. In particular, we observe very good agreement between entanglement moduli of our KG models and the experimental moduli of the target polymers.},
  language  = {en}
}
@article{Schnitzler2009,
  author    = {Schnitzler, Thomas},
  title     = {Kultivierung der Hybridomazelllinie CF-10H5 (DSMZ ACC477)},
  series = {Application notes / Sartorius stedim biotech},
  journal   = {Application notes / Sartorius stedim biotech},
  publisher = {Sartorius Stedim Biotec},
  address   = {Aubagne},
  year      = {2009},
  language  = {de}
}
@article{SchererKratzSchaedeletal.1988,
  author    = {Scherer, Ulrich W. and Kratz, J. V. and Sch{\"a}del, M. and Br{\"u}chle, W.},
  title     = {Lawrencium Chemistry: No Evidence for Oxidation States Lower than 3+ in Aqueous Solution / U.W. Scherer, J.V. Kratz, M. Sch{\"a}del, W. Br{\"u}chle, K.E. Gregorich, R.A. Henderson, D. Lee, M. Nurmia, D.C. Hoffman},
  series = {Inorganica Chimica Acta. 146 (1988)},
  journal   = {Inorganica Chimica Acta. 146 (1988)},
  isbn      = {0020-1693},
  pages     = {249 -- 254},
  year      = {1988},
  language  = {en}
}
@article{WeldenJablonskiWegeetal.2021,
  author    = {Welden, Rene and Jablonski, Melanie and Wege, Christina and Keusgen, Michael and Wagner, Patrick Hermann and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Light-Addressable Actuator-Sensor Platform for Monitoring and Manipulation of pH Gradients in Microfluidics: A Case Study with the Enzyme Penicillinase},
  series = {Biosensors},
  volume    = {11},
  journal   = {Biosensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-6374},
  doi       = {10.3390/bios11060171},
  pages     = {Artikel 171},
  year      = {2021},
  abstract  = {The feasibility of light-addressed detection and manipulation of pH gradients inside an electrochemical microfluidic cell was studied. Local pH changes, induced by a light-addressable electrode (LAE), were detected using a light-addressable potentiometric sensor (LAPS) with different measurement modes representing an actuator-sensor system. Biosensor functionality was examined depending on locally induced pH gradients with the help of the model enzyme penicillinase, which had been immobilized in the microfluidic channel. The surface morphology of the LAE and enzyme-functionalized LAPS was studied by scanning electron microscopy. Furthermore, the penicillin sensitivity of the LAPS inside the microfluidic channel was determined with regard to the analyte's pH influence on the enzymatic reaction rate. In a final experiment, the LAE-controlled pH inhibition of the enzyme activity was monitored by the LAPS.},
  language  = {en}
}
@article{BreuerRaueKirschbaumetal.2015,
  author    = {Breuer, Lars and Raue, Markus and Kirschbaum, M. and Mang, Thomas and Sch{\"o}ning, Michael Josef and Thoelen, R. and Wagner, Torsten},
  title     = {Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431944},
  pages     = {1368 -- 1374},
  year      = {2015},
  abstract  = {Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.},
  language  = {en}
}
@article{BergsMonakhovaDiehletal.2021,
  author    = {Bergs, Michel and Monakhova, Yulia and Diehl, Bernd W. and Konow, Christopher and V{\"o}lkering, Georg and Pude, Ralf and Schulze, Margit},
  title     = {Lignins isolated via catalyst-free organosolv pulping from Miscanthus x giganteus, M. sinensis, M. robustus and M. nagara: a comparative study},
  series = {Molecules},
  volume    = {26},
  journal   = {Molecules},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1420-3049},
  doi       = {10.3390/molecules26040842},
  year      = {2021},
  abstract  = {As a low-input crop, Miscanthus offers numerous advantages that, in addition to agricultural applications, permits its exploitation for energy, fuel, and material production. Depending on the Miscanthus genotype, season, and harvest time as well as plant component (leaf versus stem), correlations between structure and properties of the corresponding isolated lignins differ. Here, a comparative study is presented between lignins isolated from M. x giganteus, M. sinensis, M. robustus and M. nagara using a catalyst-free organosolv pulping process. The lignins from different plant constituents are also compared regarding their similarities and differences regarding monolignol ratio and important linkages. Results showed that the plant genotype has the weakest influence on monolignol content and interunit linkages. In contrast, structural differences are more significant among lignins of different harvest time and/or season. Analyses were performed using fast and simple methods such as nuclear magnetic resonance (NMR) spectroscopy. Data was assigned to four different linkages (A: β-O-4 linkage, B: phenylcoumaran, C: resinol, D: β-unsaturated ester). In conclusion, A content is particularly high in leaf-derived lignins at just under 70\% and significantly lower in stem and mixture lignins at around 60\% and almost 65\%. The second most common linkage pattern is D in all isolated lignins, the proportion of which is also strongly dependent on the crop portion. Both stem and mixture lignins, have a relatively high share of approximately 20\% or more (maximum is M. sinensis Sin2 with over 30\%). In the leaf-derived lignins, the proportions are significantly lower on average. Stem samples should be chosen if the highest possible lignin content is desired, specifically from the M. x giganteus genotype, which revealed lignin contents up to 27\%. Due to the better frost resistance and higher stem stability, M. nagara offers some advantages compared to M. x giganteus. Miscanthus crops are shown to be very attractive lignocellulose feedstock (LCF) for second generation biorefineries and lignin generation in Europe.},
  language  = {en}
}
@article{PothMonzonTippkoetteretal.2011,
  author    = {Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulosic biorefinery: Process integration of hydrolysis and fermentation (SSF process)},
  series = {Holzforschung},
  volume    = {65},
  journal   = {Holzforschung},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  pages     = {633 -- 637},
  year      = {2011},
  abstract  = {The aim of the present work is the process integration and the optimization of the enzymatic hydrolysis of wood and the following fermentation of the products to ethanol. The substrate is a fiber fraction obtained by organosolv pre-treatment of beech wood. For the ethanol production, a co-fermentation by two different yeasts (Saccharomyces cerevisiae and Pachysolen tannophilus) was carried out to convert glucose as well as xylose. Two approaches has been followed: 1. A two step process, in which the hydrolysis of the fiber fraction and the fermentation to product are separated from each other. 2. A process, in which the hydrolysis and the fermentation are carried out in one single process step as simultaneous saccharification and fermentation (SSF). Following the first approach, a yield of about 0.15 g ethanol per gram substrate can be reached. Based on the SSF, one process step can be saved, and additionally, the gained yield can be raised up to 0.3 g ethanol per gram substrate.},
  language  = {en}
}
@article{PrielmeierHoerstermannGyngelletal.1992,
  author    = {Prielmeier, Franz and H{\"o}rstermann, D. and Gyngell, M. L. and Merboldt, K.-D.},
  title     = {Localized Proton MRS of Acute and Chronic Gyperglycemia in Rat Brain in vivo / D. H{\"o}rstermann, F. Prielmeier , M. L. Gyngell, K.-D. Merboldt, W. H{\"a}nicke, J. Frahm},
  series = {Book of Abstracts, SMRM, 11th Annual Meeting Berlin},
  journal   = {Book of Abstracts, SMRM, 11th Annual Meeting Berlin},
  pages     = {2740},
  year      = {1992},
  language  = {en}
}
@article{MeinersBaumann1997,
  author    = {Meiners, Klaus and Baumann, Marcus},
  title     = {Lokale Beitr{\"a}ge zum globalen Klimaschutz},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {19},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {84},
  issn      = {0172-1623},
  pages     = {6 -- 12},
  year      = {1997},
  language  = {de}
}
@article{Mang2005,
  author    = {Mang, Thomas},
  title     = {Magnetische Mikro- und Nanopartikel f{\"u}r Medizin und Biotechnik},
  series = {W{\"a}ssrige Kunststoffdispersionen und ihre Anwendung : Fachbereich Angewandte Naturwissenschaften und Technik / Fachhochschule Aachen. [Schriftleitung: Thomas Mang ...]},
  journal   = {W{\"a}ssrige Kunststoffdispersionen und ihre Anwendung : Fachbereich Angewandte Naturwissenschaften und Technik / Fachhochschule Aachen. [Schriftleitung: Thomas Mang ...]},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  pages     = {137 -- 150},
  year      = {2005},
  language  = {de}
}
@article{TippkoetterWollnyKampeisetal.2011,
  author    = {Tippk{\"o}tter, Nils and Wollny, S. and Kampeis, P. and Oster, J. and Schneider, H. and Ulber, R.},
  title     = {Magnetseparation von Proteinen : Separation von Zielmolek{\"u}len durch hochselektive Aptamere},
  series = {GIT Labor-Fachzeitschrift},
  volume    = {55},
  journal   = {GIT Labor-Fachzeitschrift},
  number    = {10},
  publisher = {Wiley},
  address   = {Weinheim},
  pages     = {666},
  year      = {2011},
  abstract  = {Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinit{\"a}ten mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln wird eine einstufige Separation von Zielmolek{\"u}len aus mikrobiologischen Produktionsans{\"a}tzen m{\"o}glich. Die Aptamere werden hierf{\"u}r reversibel auf den Partikeloberfl{\"a}chen gebunden und f{\"u}r die spezifische Isolierung von Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld.},
  language  = {de}
}
@article{SchmidtTurgutLeetal.2020,
  author    = {Schmidt, Aaron C. and Turgut, Hatice and Le, Dao and Beloqui, Ana and Delaittre, Guillaume},
  title     = {Making the best of it: nitroxide-mediated polymerization of methacrylates via the copolymerization approach with functional styrenics},
  series = {Polymer Chemistry},
  volume    = {11},
  journal   = {Polymer Chemistry},
  number    = {2},
  publisher = {Royal Society of Chemistry (RSC)},
  address   = {Cambridge},
  doi       = {10.1039/C9PY01458F},
  pages     = {593 -- 604},
  year      = {2020},
  abstract  = {The SG1-mediated solution polymerization of methyl methacrylate (MMA) and oligo(ethylene glycol) methacrylate (OEGMA, Mₙ = 300 g mol⁻¹) in the presence of a small amount of functional/reactive styrenic comonomer is investigated. Moieties such as pentafluorophenyl ester, triphenylphosphine, azide, pentafluorophenyl, halide, and pyridine are considered. A comonomer fraction as low as 5 mol\% typically results in a controlled/living behavior, at least up to 50\% conversion. Chain extensions with styrene for both systems were successfully performed. Variation of physical properties such as refractive index (for MMA) and phase transition temperature (for OEGMA) were evaluated by comparing to 100\% pure homopolymers. The introduction of an activated ester styrene derivative in the polymerization of OEGMA allows for the synthesis of reactive and hydrophilic polymer brushes with defined thickness. Finally, using the example of pentafluorostyrene as controlling comonomer, it is demonstrated that functional PMMA-b-PS are able to maintain a phase separation ability, as evidenced by the formation of nanostructured thin films.},
  language  = {en}
}
@article{BaumannJahnke1986,
  author    = {Baumann, Marcus and Jahnke, J.},
  title     = {Marine Planktonalgen der Arktis I. Die Haptophycee Phaeocystis pouchetii / Baumann, M. ; Jahnke, J.},
  series = {Mikrokosmos. 75 (1986), H. 9},
  journal   = {Mikrokosmos. 75 (1986), H. 9},
  isbn      = {0026-3680},
  pages     = {262 -- 265},
  year      = {1986},
  language  = {de}
}
@article{BaumannKraemer1986,
  author    = {Baumann, Marcus and Kr{\"a}mer, M.},
  title     = {Marine Planktonalgen der Arktis II. Diatomeen / Baumann, M. ; Kr{\"a}mer, M.},
  series = {Mikrokosmos. 75 (1986), H. 10},
  journal   = {Mikrokosmos. 75 (1986), H. 10},
  isbn      = {0026-3680},
  pages     = {306 -- 310},
  year      = {1986},
  language  = {de}
}
@article{FeuerriegelKuenschStahlbergetal.1994,
  author    = {Feuerriegel, Uwe and K{\"u}nsch, M. and Stahlberg, R. and Steiger, F.},
  title     = {Massen- und Energiebilanz des Thermoselect-Verfahrens},
  series = {Thermoselect-Verfahren zur Ent- und Vergasung von Abf{\"a}llen / Franz J. Schweitzer [Hrsg.]},
  journal   = {Thermoselect-Verfahren zur Ent- und Vergasung von Abf{\"a}llen / Franz J. Schweitzer [Hrsg.]},
  publisher = {EF-Verl. f{\"u}r Energie- u. Umwelttechnik},
  address   = {Berlin},
  isbn      = {3-924511-47-0},
  pages     = {207 S. : graph. Darst.},
  year      = {1994},
  language  = {de}
}
@article{FeuerriegelStahlbergWeisenburgeretal.1995,
  author    = {Feuerriegel, Uwe and Stahlberg, R. and Weisenburger, P. and Steiger, F.},
  title     = {Massen- und Energiebilanzen unter Einbeziehung der Untersuchungen an der Thermoselect-Anlage Fondotoce (Italien). Stahlberg, R.; Feuerriegel, U.; Weisenburger, P.; Steiger, F.},
  series = {Thermoselect : der neue Weg, Restm{\"u}ll umweltgerecht zu behandeln ; [Tagungsband zur Fachtagung Thermoselect am 19. Januar 1995 in Rastatt/Baden] / G{\"u}nther H{\"a}ßler. 2. durchges. und erw. Aufl.},
  journal   = {Thermoselect : der neue Weg, Restm{\"u}ll umweltgerecht zu behandeln ; [Tagungsband zur Fachtagung Thermoselect am 19. Januar 1995 in Rastatt/Baden] / G{\"u}nther H{\"a}ßler. 2. durchges. und erw. Aufl.},
  publisher = {Goerner},
  address   = {Karlsruhe},
  isbn      = {3-9803665-4-5},
  pages     = {55 -- 84},
  year      = {1995},
  language  = {de}
}
@article{LiuSchaapBallemansetal.2017,
  author    = {Liu, Z. and Schaap, K. S. and Ballemans, L. and de Blois, E. and Rohde, M. and Paulßen, Elisabeth},
  title     = {Measurement of reaction kinetics of [177Lu]Lu-DOTA-TATE using a microfluidic system},
  series = {Dalton Transactions},
  volume    = {46},
  journal   = {Dalton Transactions},
  number    = {42},
  issn      = {1477-9234},
  doi       = {10.1039/C7DT01830D},
  pages     = {14669 -- 14676},
  year      = {2017},
  language  = {en}
}
@article{SeifarthGrosseGrossmannetal.2017,
  author    = {Seifarth, Volker and Grosse, Joachim O. and Grossmann, Matthias and Janke, Heinz Peter and Arndt, Patrick and Koch, Sabine and Epple, Matthias and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Mechanical induction of bi-directional orientation of primary porcine bladder smooth muscle cells in tubular fibrin-poly(vinylidene fluoride) scaffolds for ureteral and urethral repair using cyclic and focal balloon catheter stimulation},
  series = {Journal of Biomaterials Applications},
  volume    = {32},
  journal   = {Journal of Biomaterials Applications},
  number    = {3},
  publisher = {Sage},
  address   = {London},
  issn      = {1530-8022},
  doi       = {10.1177/0885328217723178},
  pages     = {321 -- 330},
  year      = {2017},
  language  = {en}
}
@article{InagakiSleddensLinkelsWassenaaretal.2011,
  author    = {Inagaki, Akiko and Sleddens-Linkels, Esther and Wassenaar, Evelyne and Ooms, Marja and Cappellen, Wiggert A. van and Hoeijmakers, Jan H. J. and Seibler, Jost and Vogt, Thomas F. and Shin, Myung K. and Grootegoed, J. Anton and Baarends, Willy M.},
  title     = {Meiotic functions of RAD18},
  series = {Journal of Cell Science},
  volume    = {124},
  journal   = {Journal of Cell Science},
  number    = {16},
  publisher = {Company of Biologists Limited},
  address   = {Cambridge},
  issn      = {1477-9137},
  doi       = {10.1242/jcs.081968},
  pages     = {2837 -- 2850},
  year      = {2011},
  language  = {en}
}
@article{TrappLammersEngudaretal.2023,
  author    = {Trapp, Svenja and Lammers, Tom and Engudar, Gokce and Hoehr, Cornelia and Denkova, Antonia G. and Paulßen, Elisabeth and de Kruijff, Robin M.},
  title     = {Membrane-based microfluidic solvent extraction of Ga-68 from aqueous Zn solutions: towards an automated cyclotron production loop},
  series = {EJNMMI Radiopharmacy and Chemistry},
  volume    = {2023},
  journal   = {EJNMMI Radiopharmacy and Chemistry},
  number    = {8, Article number: 9},
  publisher = {Springer Nature},
  issn      = {2365-421X},
  doi       = {10.1186/s41181-023-00195-2},
  pages     = {1 -- 14},
  year      = {2023},
  language  = {en}
}
@article{HarishWriggersJungketal.2016,
  author    = {Harish, Ajay B. and Wriggers, Peter and Jungk, Juliane and Hojdis, Nils and Recker, Carla},
  title     = {Mesoscale Constitutive Modeling of Non-Crystallizing Filled Elastomers},
  series = {Computational Mechanics},
  volume    = {57},
  journal   = {Computational Mechanics},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0924},
  doi       = {10.1007/s00466-015-1251-1},
  pages     = {653 -- 677},
  year      = {2016},
  abstract  = {Elastomers are exceptional materials owing to their ability to undergo large deformations before failure. However, due to their very low stiffness, they are not always suitable for industrial applications. Addition of filler particles provides reinforcing effects and thus enhances the material properties that render them more versatile for applications like tyres etc. However, deformation behavior of filled polymers is accompanied by several nonlinear effects like Mullins and Payne effect. To this day, the physical and chemical changes resulting in such nonlinear effect remain an active area of research. In this work, we develop a heterogeneous (or multiphase) constitutive model at the mesoscale explicitly considering filler particle aggregates, elastomeric matrix and their mechanical interaction through an approximate interface layer. The developed constitutive model is used to demonstrate cluster breakage, also, as one of the possible sources for Mullins effect observed in non-crystallizing filled elastomers.},
  language  = {en}
}
@article{ElbersRichter1994,
  author    = {Elbers, Gereon and Richter, J.},
  title     = {Messung kraftfahrzeugbedingter Rußimmissionen},
  series = {Staub, Reinhaltung der Luft : air quality control. 54 (1994)},
  journal   = {Staub, Reinhaltung der Luft : air quality control. 54 (1994)},
  isbn      = {0039-0771},
  pages     = {19},
  year      = {1994},
  language  = {de}
}
@article{Elbers1993,
  author    = {Elbers, Gereon},
  title     = {Messung von Ruß in der Außenluft - Praktische Erfahrungen und Meßergebnisse aus NRW},
  series = {Aktuelle Aufgaben der Messtechnik in der Luftreinhaltung : Kolloquium Heidelberg, 2. bis 4. Juni 1993 / Kommission Reinhaltung der Luft im VDI und DIN},
  journal   = {Aktuelle Aufgaben der Messtechnik in der Luftreinhaltung : Kolloquium Heidelberg, 2. bis 4. Juni 1993 / Kommission Reinhaltung der Luft im VDI und DIN},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091059-3},
  pages     = {337},
  year      = {1993},
  language  = {de}
}
@article{BongaertsKraemerMuelleretal.2001,
  author    = {Bongaerts, Johannes and Kr{\"a}mer, Marco and M{\"u}ller, Ulrike and Raeven, Leon and Wubbolts, Marcel},
  title     = {Metabolic engineering for microbial production of aromatic amino acids and derived compounds},
  series = {Metabolic engineering},
  volume    = {Vol. 3},
  journal   = {Metabolic engineering},
  number    = {Iss. 4},
  issn      = {1096-7184 (E-Journal); 1096-7176 (Print)},
  pages     = {289 -- 300},
  year      = {2001},
  language  = {en}
}
@article{KraemerBongaertsBovenbergetal.2003,
  author    = {Kr{\"a}mer, Marco and Bongaerts, Johannes and Bovenberg, Roel and Kremer, Susanne and M{\"u}ller, Ulrike and Orf, Sonja and Wubbolts, Marcel and Raeven, Leon},
  title     = {Metabolic engineering for microbial production of shikimic acid},
  series = {Metabolic engineering},
  volume    = {Vol. 5},
  journal   = {Metabolic engineering},
  number    = {Iss. 4},
  issn      = {1096-7184 (E-Journal); 1096-7176 (Print)},
  pages     = {277 -- 283},
  year      = {2003},
  language  = {en}
}