@article{WeberArentSteffenetal.2017, author = {Weber, Tobias and Arent, Jan-Christoph and Steffen, Lucas and Balvers, Johannes M. and Duhovic, Miro}, title = {Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation}, series = {Journal of Composite Materials}, volume = {51}, journal = {Journal of Composite Materials}, number = {12}, publisher = {Sage}, address = {London}, issn = {1530-793X}, doi = {10.1177/0021998317699868}, pages = {1753 -- 1767}, year = {2017}, language = {en} } @article{FischerKowalskiPudasaini2012, author = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.}, title = {Topographic curvature effects in applied avalanche modelling}, series = {Cold Regions Science and Technology}, volume = {74-75}, journal = {Cold Regions Science and Technology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1872-7441}, doi = {10.1016/j.coldregions.2012.01.005}, pages = {21 -- 30}, year = {2012}, abstract = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.}, language = {en} } @book{GerhardtKramerJansen1977, author = {Gerhardt, Hans Joachim and Kramer, Carl and Jansen, Hubert}, title = {Traglufthallen unter Windbelastung}, publisher = {Westdt. Verl.}, address = {Opladen}, isbn = {3-531-02650-X}, pages = {39 S. : Ill., graph. Darst.}, year = {1977}, language = {de} } @book{Schmitz1999, author = {Schmitz, G{\"u}nter}, title = {TransMechatronik : Entwicklung und Transfer von Entwicklungssystemen der Mechatronik / Demel, Werner ... (Hrsg.)}, publisher = {Heinz-Nixdorf-Institut}, address = {Paderborn}, pages = {145 S. : Ill., graph. Darst.}, year = {1999}, language = {de} } @article{Esch2010, author = {Esch, Thomas}, title = {Trends in commercial vehicle powertrains}, series = {ATZautotechnology}, volume = {2010}, journal = {ATZautotechnology}, number = {10}, publisher = {Vieweg \& Sohn}, address = {Wiesbaden}, issn = {2192-886X}, doi = {10.1007/BF03247185}, pages = {26 -- 31}, year = {2010}, abstract = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.}, language = {en} } @article{Esch2010, author = {Esch, Thomas}, title = {Trends in der Nutzfahrzeugantriebstechnik}, series = {Motortechnische Zeitschrift (MTZ)}, volume = {71}, journal = {Motortechnische Zeitschrift (MTZ)}, number = {10}, publisher = {Springer Nature}, address = {Basel}, isbn = {0024-8525}, doi = {10.1007/bf03225608}, pages = {652 -- 658}, year = {2010}, language = {de} } @book{Ley1995, author = {Ley, Wilfried}, title = {Tr{\"a}gersysteme : Gemeinschaftsveranstaltung der FH Aachen und der DGLR / 8. Raumfahrt-Kolloquium an der Fachhochschule Aachen, 9. November 1995 / Ley, Wilfried [Hrgs.]}, publisher = {DGLR}, address = {Bonn}, isbn = {3-922010-92-X}, pages = {VII, 245 S. : Ill., graph. Darst.}, year = {1995}, language = {de} } @inproceedings{KowalskiBarteltMcElwaine2007, author = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.}, title = {Two-phase debris flow modeling}, series = {Geophysical Research Abstracts}, booktitle = {Geophysical Research Abstracts}, year = {2007}, language = {en} } @inproceedings{KowalskiMcElwaine2008, author = {Kowalski, Julia and McElwaine, J.}, title = {Two-phase debris flow modeling}, series = {Geophysical Research Abstracts}, booktitle = {Geophysical Research Abstracts}, year = {2008}, language = {en} } @phdthesis{Kowalski2008, author = {Kowalski, Julia}, title = {Two-phase Modeling of Debris Flows}, publisher = {Mensch und Buch}, address = {Berlin}, isbn = {978-3-86664-524-0}, pages = {148}, year = {2008}, language = {en} } @article{WittmannGillessenOttoetal.1996, author = {Wittmann, Klaus and Gillessen, F. and Otto, G. and R{\"o}stel, R.}, title = {Undercooling and solidification of metallic melts suspended in a non-nucleating matrix: Experiment NUCAL of the German Spacelab Mission D-2}, series = {Acta Astronautica. 38 (1996), H. 1}, journal = {Acta Astronautica. 38 (1996), H. 1}, isbn = {0094-5765}, pages = {63 -- 68}, year = {1996}, language = {en} } @techreport{BohnFunkeGier1998, author = {Bohn, Dieter and Funke, Harald and Gier, J.}, title = {Untersuchung des Str{\"o}mungsausgleichs in den Schaufelreihen ungleichf{\"o}rmig ungestr{\"o}mter Turbomaschinen}, organization = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)}, year = {1998}, abstract = {Zwischenbericht {\"u}ber das Vorhaben FVV - Nr. 665 (AIF-Nr. 10780) Heft R 498(1998) S. 123-136. Informationstagung Turbinen, Fr{\"u}hjahr 1998, Frankfurt}, subject = {Str{\"o}mungsmaschine}, language = {de} } @techreport{BohnFunkeGieretal.1999, author = {Bohn, Dieter and Funke, Harald and Gier, J. and Heuer, T.}, title = {Untersuchung des Str{\"o}mungsausgleichs in den Schaufelreihen ungleichf{\"o}rmig ungestr{\"o}mter Turbomaschinen}, organization = {Forschungsvereinigung Verbrennungskraftmaschinen (FVV)}, year = {1999}, abstract = {Abschlussbericht {\"u}ber das Vorhaben FVV-Nr. 665 (AIF-Nr. 10780). Laufzeit 01.08.1996 bis 31.10.1999. Heft R 504 (1999). S. 99-124. Informationstagung Turbinen, Herbst 1999, Heidelberg.}, subject = {Str{\"o}mungsmaschine}, language = {de} } @book{CordewinerSchoernerKochetal.1983, author = {Cordewiner, Hans-Josef and Schoerner, M. and Koch, R. and Bachner, E.}, title = {Untersuchungen zum Einsatz eines CAD-Systems fuer den Konstruktionsbereich der Zentralabteilung Allgemeine Technologie der Kernforschungsanlage Juelich}, publisher = {Gesellschaft fuer Elektronische Informationsverarbeitung}, address = {Aachen}, year = {1983}, language = {de} } @book{Gerhardt1977, author = {Gerhardt, Hans Joachim}, title = {Untersuchungen zur aerodynamischen Detailoptimierung von Personenkraftwagen mit Hilfe von Modellversuchen im Windkanal / Carl Kramer ; Hans-Joachim Gerhardt; Siegfried Scherer}, publisher = {Westdt. Verl.}, address = {Opladen}, isbn = {3-531-02633-X}, pages = {39 S. : Ill., graph. Darst.}, year = {1977}, language = {de} } @book{GerhardtKramer1982, author = {Gerhardt, Hans Joachim and Kramer, Carl}, title = {Untersuchungen zur Lagesicherung von Flachd{\"a}chern mittels Kies- und Plattenabdeckungen}, publisher = {IRB-Verl.}, address = {Stuttgart}, pages = {26, [18] S. : Ill., graph. Darst.}, year = {1982}, language = {de} } @phdthesis{Dahmann1992, author = {Dahmann, Peter}, title = {Untersuchungen zur Wirksamkeit von Filtern in hydraulischen Anlagen}, pages = {VI, 160 S. : Ill., graph. Darst.}, year = {1992}, language = {de} } @article{RoethPielenWolffetal.2018, author = {R{\"o}th, Thilo and Pielen, Michael and Wolff, Klaus and L{\"u}diger, Thomas}, title = {Urbane Fahrzeugkonzepte f{\"u}r die Shared Mobility}, series = {Automobiltechnische Zeitschrift - ATZ}, volume = {120}, journal = {Automobiltechnische Zeitschrift - ATZ}, number = {1}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0001-2785}, doi = {10.1007/s35148-017-0176-8}, pages = {18 -- 23}, year = {2018}, abstract = {Urbane Mobilit{\"a}tskonzepte der Zukunft erfordern neue Unternehmensformen, idealerweise aus Old Economy und New Economy, sowie eine enge Anbindung an die gesellschaftsrelevante Zukunftsforschung. F{\"u}r neue Fahrzeugkonzepte des Carsharing bedeutet dies, dass alle kostenverursachenden Faktoren erfasst und analysiert werden m{\"u}ssen. Die FH Aachen, share2drive und FEV geben einen Ausblick auf die zuk{\"u}nftige Fahrzeugklasse der Personal Public Vehicles als „Rolling Device".}, language = {de} } @incollection{BauschatBennerKlingeetal.2022, author = {Bauschat, J.-Michael and Benner, Miriam and Klinge, Henner and Ziegler, Simon}, title = {Urbane Mobilit{\"a}t entdeckt die 3. Dimension}, series = {Transforming Mobility - What Next?}, booktitle = {Transforming Mobility - What Next?}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-36429-8}, doi = {10.1007/978-3-658-36430-4_53}, pages = {895 -- 916}, year = {2022}, abstract = {Der Themenkomplex urbane Mobilit{\"a}t ist getrieben durch den Verkehrsinfarkt in Ballungszentren, durch Luftverschmutzung und L{\"a}rm, sowie den Trend zum Leben in der Stadt in den st{\"a}dteplanerischen Fokus ger{\"u}ckt. Emissionsneutrale Antriebskonzepte in der Luftfahrt f{\"u}hren zu Ans{\"a}tzen Flugger{\"a}te einzusetzen, die batteriegetrieben vertikal aufsteigen und landen k{\"o}nnen. Flugphysikalisch und energetisch ist diese Technik nur dann sinnvoll, wenn es zwingende Gr{\"u}nde gibt (z.B. Rettungseins{\"a}tze), daher wird der flugphysikalische Hintergrund prinzipiell erl{\"a}utert. Es werden einige aktuelle Lufttransportkonzepte f{\"u}r eine urbane Personenbef{\"o}rderung vorgestellt. Sollte es verst{\"a}rkt zu Lufttransport {\"u}ber St{\"a}dten kommen, m{\"u}ssen betroffene Luftr{\"a}ume geordnet und {\"u}berwacht werden. Wie kompatibel Lufttransportsysteme mit den heute bereits relevanten urbanen Bef{\"o}rderungsmitteln sein m{\"u}ssen, wird kritisch diskutiert. Abschließend werden die Aspekte Akzeptanz durch die Kunden und Wirtschaftlichkeit ebenso angerissen, wie die hochproblematische Rohstoffgewinnung, die Entsorgung und das Recycling von Batterien.}, language = {de} } @article{BlomePriester1984, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Urknall und Evolution des Kosmos. I. Einstein-Friedmann-Kosmos und das Neutrino-Problem}, series = {Naturwissenschaften. 71 (1984), H. 9}, journal = {Naturwissenschaften. 71 (1984), H. 9}, isbn = {0028-1042}, pages = {456 -- 467}, year = {1984}, language = {de} } @article{BlomePriester1984, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Urknall und Evolution des Kosmos. II. Inflation{\"a}r modifizierter Urknall und Eschatologie des Kosmos}, series = {Naturwissenschaften. 71 (1984), H. 10}, journal = {Naturwissenschaften. 71 (1984), H. 10}, isbn = {0028-1042}, pages = {515 -- 527}, year = {1984}, language = {de} } @inproceedings{FunkeEschRoosen2009, author = {Funke, Harald and Esch, Thomas and Roosen, Peter}, title = {Using motor gasoline for aircrafts - coping with growing bio-fuel-caused risks by understanding cause-effect relationship}, series = {Fuels 2009 : mineral oil based and alternative fuels ; 7th international colloquium ; January 14 - 15, 2009}, booktitle = {Fuels 2009 : mineral oil based and alternative fuels ; 7th international colloquium ; January 14 - 15, 2009}, editor = {Bartz, Wilfried J.}, publisher = {Technische Akademie Esslingen (TAE)}, address = {Ostfildern}, isbn = {978-3-924813-75-8}, pages = {237 -- 244}, year = {2009}, abstract = {The utilisation of vehicle-oriented gasoline in general aviation is very desirable for both ecological and economical reasons, as well as for general considerations of availability. As of today vehicle fuels may be used if the respective engine and cell are certified for such an operation. For older planes a supplementary technical certificate is provided for gasoline mixtures with less than 1 \% v/v ethanol only, though. Larger admixtures of ethanol may lead to sudden engine malfunction and should be considered as considerable security risks. Major problems are caused by the partially ethanol non-withstanding materials, a necessarily changed stochiometric adjustment of the engine for varying ethanol shares and the tendency for phase separation in the presence of absorbed water. The concepts of the flexible fuel vehicles are only partially applicable in the view of air security.}, language = {en} } @article{BlomePriester1985, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Vacuum energy in cosmic dynamics}, series = {Astrophysics and Space Science. 117 (1985), H. 2}, journal = {Astrophysics and Space Science. 117 (1985), H. 2}, isbn = {0004-640X}, pages = {327 -- 335}, year = {1985}, language = {en} } @article{GermanMikuckiWelchetal.2021, author = {German, Laura and Mikucki, Jill A. and Welch, Susan A. and Welch, Kathleen A. and Lutton, Anthony and Dachwald, Bernd and Kowalski, Julia and Heinen, Dirk and Feldmann, Marco and Francke, Gero and Espe, Clemens and Lyons, W. Berry}, title = {Validation of sampling antarctic subglacial hypersaline waters with an electrothermal ice melting probe (IceMole) for environmental analytical geochemistry}, series = {International Journal of Environmental Analytical Chemistry}, volume = {101}, journal = {International Journal of Environmental Analytical Chemistry}, number = {15}, publisher = {Taylor \& Francis}, address = {London}, issn = {0306-7319}, doi = {10.1080/03067319.2019.1704750}, pages = {2654 -- 2667}, year = {2021}, abstract = {Geochemical characterisation of hypersaline waters is difficult as high concentrations of salts hinder the analysis of constituents at low concentrations, such as trace metals, and the collection of samples for trace metal analysis in natural waters can be easily contaminated. This is particularly the case if samples are collected by non-conventional techniques such as those required for aquatic subglacial environments. In this paper we present the first analysis of a subglacial brine from Taylor Valley, (~ 78°S), Antarctica for the trace metals: Ba, Co, Mo, Rb, Sr, V, and U. Samples were collected englacially using an electrothermal melting probe called the IceMole. This probe uses differential heating of a copper head as well as the probe's sidewalls and an ice screw at the melting head to move through glacier ice. Detailed blanks, meltwater, and subglacial brine samples were collected to evaluate the impact of the IceMole and the borehole pump, the melting and collection process, filtration, and storage on the geochemistry of the samples collected by this device. Comparisons between melt water profiles through the glacier ice and blank analysis, with published studies on ice geochemistry, suggest the potential for minor contributions of some species Rb, As, Co, Mn, Ni, NH4+, and NO2-+NO3- from the IceMole. The ability to conduct detailed chemical analyses of subglacial fluids collected with melting probes is critical for the future exploration of the hundreds of deep subglacial lakes in Antarctica.}, language = {en} } @article{EschGoebelPischinger1995, author = {Esch, Thomas and G{\"o}bel, T. and Pischinger, M.}, title = {Variable Ventilsteuerung - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung}, series = {Forschungsberichte Verbrennungskraftmaschinen. 578 (1995)}, journal = {Forschungsberichte Verbrennungskraftmaschinen. 578 (1995)}, pages = {1 -- 42}, year = {1995}, language = {de} } @article{EschWoltersSalberetal.2001, author = {Esch, Thomas and Wolters, P. and Salber, W. and Geiger, J.}, title = {Variable Ventilsteuerung und Direkteinspritzung - vom Wettbewerb zur Synergie}, series = {Motor und Umwelt 2001, Internal Combustion Engine Versus Fuel Cell - Potential and Limitations as Automotive Power Sources, Verbrennungsmotor versus Brennstoffzelle - Potenziale und Grenzen f{\"u}r den Automobilantrieb, Proc., Graz, AT, 6.-7. Sep, 2001}, journal = {Motor und Umwelt 2001, Internal Combustion Engine Versus Fuel Cell - Potential and Limitations as Automotive Power Sources, Verbrennungsmotor versus Brennstoffzelle - Potenziale und Grenzen f{\"u}r den Automobilantrieb, Proc., Graz, AT, 6.-7. Sep, 2001}, pages = {183 -- 206}, year = {2001}, language = {de} } @inproceedings{Rosenkranz1993, author = {Rosenkranz, Josef}, title = {Verbesserung der Laufruhe des Verbrennungsmotors durch abgestimmte qualit{\"a}tssteigernde Maßnahmen beim Auswuchten des Kurbeltriebs}, series = {Antriebstechnisches Kolloquium '93 / Industrieentwicklungen und Forschungsergebnisse f{\"u}r die Maschinen{\"u}berwachung und die Konstruktion in der Antriebstechnik. - (Reihe IME-Leitfaden)}, booktitle = {Antriebstechnisches Kolloquium '93 / Industrieentwicklungen und Forschungsergebnisse f{\"u}r die Maschinen{\"u}berwachung und die Konstruktion in der Antriebstechnik. - (Reihe IME-Leitfaden)}, publisher = {Verl. T{\"U}V Rheinland}, address = {K{\"o}ln}, isbn = {3-8249-0139-0}, pages = {176 -- 199}, year = {1993}, language = {de} } @article{EschSaupeFahletal.1994, author = {Esch, Thomas and Saupe, T. and Fahl, E. and Koch, F.}, title = {Verbrauchseinsparung durch bedarfsgerechten Antrieb der Nebenaggregate}, series = {Motortechnische Zeitschrift. 55 (1994), H. 7/8}, journal = {Motortechnische Zeitschrift. 55 (1994), H. 7/8}, isbn = {0024-8525}, pages = {416 -- 431}, year = {1994}, language = {de} } @book{Esch2015, author = {Esch, Thomas}, title = {Verbrennungsmotoren}, edition = {11. Aufl., [Umdruck]}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill. und graph. Darst.}, year = {2015}, language = {de} } @book{Esch2013, author = {Esch, Thomas}, title = {Verbrennungsmotoren}, edition = {10. Aufl., [Umdruck]}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill. und graph. Darst.}, year = {2013}, language = {de} } @book{Esch2005, author = {Esch, Thomas}, title = {Verbrennungsmotoren. - 6. Aufl., [Umdruck]}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill., graph. Darst.}, year = {2005}, language = {de} } @book{Esch2008, author = {Esch, Thomas}, title = {Verbrennungstechnik : Vorlesungsumdruck. 7. Aufl.}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill. und graph. Darst.}, year = {2008}, language = {de} } @book{Esch2011, author = {Esch, Thomas}, title = {Verbrennungstechnik : Vorlesungsumdruck. 8. Aufl.}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill. und graph. Darst.}, year = {2011}, language = {de} } @book{Esch2007, author = {Esch, Thomas}, title = {Verbrennungstechnik. - 6. Aufl., [Umdruck]. - (Angewandte Thermodynamik und Verbrennungstechnik)}, publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik}, address = {Aachen}, pages = {Getr. Z{\"a}hlung : Ill. und graph. Darst.}, year = {2007}, language = {de} } @misc{WahleFrankeRoland1993, author = {Wahle, Michael and Franke, Harald and Roland, Peter}, title = {Verfahren und Vorrichtung zur Herstellung von Bauteilen aus Verbundwerkstofflaminaten mit Duromermatrix : Offenlegungsschrift}, publisher = {Deutsches Patent- und Markenamt}, address = {M{\"u}nchen}, pages = {6 S. : graph. Darst.}, year = {1993}, language = {de} } @article{Finger2017, author = {Finger, Felix}, title = {Vergleichende Leistungs- und Nutzenbewertung von VTOL- und CTOL-UAVs}, series = {Luft- und Raumfahrt : informieren, vernetzen, f{\"o}rdern / Hrsg.: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, volume = {38}, journal = {Luft- und Raumfahrt : informieren, vernetzen, f{\"o}rdern / Hrsg.: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, number = {1}, issn = {0173-6264}, pages = {44 -- 47}, year = {2017}, language = {de} } @article{HeierliPurvesFelberetal.2004, author = {Heierli, Joachim and Purves, Ross S. and Felber, Andreas and Kowalski, Julia}, title = {Verification of nearest-neighbours interpretations in avalanche forecasting}, series = {Annals of Glaciology}, volume = {38}, journal = {Annals of Glaciology}, number = {1}, isbn = {1727-5644}, pages = {84 -- 88}, year = {2004}, abstract = {This paper examines the positive and negative aspects of a range of interpretations of nearest-neighbours models. Measures-oriented and distributionoriented verification methods are applied to categorial, probabilistic and descriptive interpretations of nearest neighbours used operationally in avalanche forecasting in Scotland and Switzerland. The dependence of skill and accuracy measures on base rate is illustrated. The purpose of the forecast and the definition of events are important variables in determining the quality of the forecast. A discussion of the application of different interpretations in operational avalanche forecasting is presented.}, language = {en} } @article{Dachwald2003, author = {Dachwald, Bernd}, title = {Verwendung eines neuronalen Reglers und evolution{\"a}rer Algorithmen zur Berechnung optimaler interplanetarer Sonnenseglerbahnen}, series = {Deutscher Luft- und Raumfahrtkongress 2003 : M{\"u}nchen, 17. bis 20. November 2003, Motto: 100 Jahre Motorflug - 112 Jahre Menschenflug: Visionen gestalten Zukunft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 1. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)}, journal = {Deutscher Luft- und Raumfahrtkongress 2003 : M{\"u}nchen, 17. bis 20. November 2003, Motto: 100 Jahre Motorflug - 112 Jahre Menschenflug: Visionen gestalten Zukunft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 1. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)}, address = {Bonn}, pages = {211 -- 218}, year = {2003}, language = {de} } @article{GerhardtSchoenwaldKonrath2007, author = {Gerhardt, Hans Joachim and Sch{\"o}nwald, J. and Konrath, B.}, title = {Verwendung von Leichtgas bei Brandsimulationen - unzul{\"a}ssig oder sinnvoll?}, series = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 56 (2007), H. 1}, journal = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 56 (2007), H. 1}, isbn = {0042-1804}, pages = {29 -- 31}, year = {2007}, language = {de} } @article{MathiakWillneckerPlescher2005, author = {Mathiak, Gerhard and Willnecker, Rainer and Plescher, Engelbert}, title = {Vibrational effects on diffusion experiments}, series = {Microgravity science and technology : international journal for microgravity research and applications}, volume = {Vol. 15}, journal = {Microgravity science and technology : international journal for microgravity research and applications}, number = {No. 1}, issn = {0938-0108}, pages = {295 -- 300}, year = {2005}, language = {en} } @inproceedings{BaaderReiswichBartschetal.2018, author = {Baader, Fabian and Reiswich, M. and Bartsch, M. and Keller, D. and Tiede, E. and Keck, G. and Demircian, A. and Friedrich, M. and Dachwald, Bernd and Sch{\"u}ller, K. and Lehmann, R. and Chojetzki, R. and Durand, C. and Rapp, L. and Kowalski, Julia and F{\"o}rstner, R.}, title = {VIPER - Student research on extraterrestrical ice penetration technology}, series = {Proceedings of the 2nd Symposium on Space Educational Activities}, booktitle = {Proceedings of the 2nd Symposium on Space Educational Activities}, pages = {1 -- 6}, year = {2018}, abstract = {Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process.}, language = {en} } @article{SchmitzVomHemdtBreitschuhetal.2002, author = {Schmitz, G{\"u}nter and Vom Hemdt, A. and Breitschuh, S. and Graber, S.}, title = {Virtuelle Praktika f{\"u}r die Ingenieurausbildung}, series = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher}, journal = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher}, publisher = {VDE-Verl.}, address = {Berlin [u.a.]}, isbn = {3-8007-2723-4}, pages = {69 -- 74}, year = {2002}, language = {de} } @book{LemaitreBlome2010, author = {Lemaitre, George and Blome, Hans-Joachim}, title = {Von der klassischen Kosmologie zum Quantenkosmos}, editor = {Blome, Hans-Joachim}, publisher = {Deutsch}, address = {Frankfurt am Main}, isbn = {978-3-8171-3304-8}, pages = {240 S.}, year = {2010}, language = {de} } @article{SchirraBissonnetteBramesfeld2018, author = {Schirra, Julian and Bissonnette, William and Bramesfeld, G{\"o}tz}, title = {Wake-model effects on induced drag prediction of staggered boxwings}, series = {Aerospace}, volume = {5}, journal = {Aerospace}, number = {1}, issn = {2226-4310}, doi = {10.3390/aerospace5010014}, year = {2018}, language = {en} } @techreport{EschEickmannCoussementetal.2013, author = {Esch, Thomas and Eickmann, Matthias and Coussement, Axel and Kalbhenn, Hartmut}, title = {Wasserstoffspezifische Abstimmung der Ladungswechselvorg{\"a}nge eines Verbrennungsmotors mit Direkteinblasung : Schlussbericht f{\"u}r das Forschungsvorhaben ; Kurztitel: HydI - Hydrogen direct injection ; F{\"o}rderperiode 01.07.2008 - 31.12.2011 / FH Aachen, Thermodynamik und Verbrennungstechnik}, address = {Aachen}, organization = {FH Aachen}, pages = {Online-Ressource (PDF-Datei: 94 S.) : Ill., graph. Darst.}, year = {2013}, language = {de} } @article{SchmitzSchmittDammann1985, author = {Schmitz, G{\"u}nter and Schmitt, H.J. and Dammann, H.}, title = {Weakly Guiding Semileaky Isolator with a Form-Birefringent Top Layer}, series = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)}, journal = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)}, publisher = {Optical Society of America}, address = {Washington, DC}, pages = {260}, year = {1985}, language = {en} } @book{Koehler1990, author = {K{\"o}hler, Bernd}, title = {Werkstofftechnologie der Luft- und Raumfahrt. Teil 1 : Grundlagen. -2. Aufl.}, publisher = {Mainz}, address = {Aachen}, isbn = {3-89653-861-6}, pages = {183 S. : graph. Darst.}, year = {1990}, language = {de} } @book{Koehler2001, author = {K{\"o}hler, Bernd}, title = {Werkstofftechnologie der Luft- und Raumfahrt. Teil 1 : Grundlagen. -4. Aufl.}, publisher = {Mainz}, address = {Aachen}, isbn = {3-89653-861-6}, pages = {183 S. : graph. Darst.}, year = {2001}, language = {de} } @book{Koehler1990, author = {K{\"o}hler, Bernd}, title = {Werkstofftechnologie der Luft- und Raumfahrt. Teil 2 : Leichtmetalle und St{\"a}hle}, publisher = {Mainz}, address = {Aachen}, isbn = {3-89653-862-4}, pages = {194 S. : graph. Darst.}, year = {1990}, language = {de} } @book{Koehler2001, author = {K{\"o}hler, Bernd}, title = {Werkstofftechnologie der Luft- und Raumfahrt. Teil 2 : Leichtmetalle und St{\"a}hle. - 2. Aufl.}, publisher = {Mainz}, address = {Aachen}, isbn = {3-89653-862-4}, pages = {194 S. : graph. Darst.}, year = {2001}, language = {de} }