@book{AltSchumny1982,
  author    = {Alt, Helmut and Schumny, Harald},
  title     = {Programmierung mathematischer Algorithmen (Vieweg-Programmbibliothek Taschenrechner ; 1) / Helmut Alt ; Harald Schumny [Hrsg.]},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {3-528-04211-7},
  pages     = {92 S.},
  year      = {1982},
  language  = {de}
}
@inproceedings{TreulingCzarneckiWolf2023,
  author    = {Treuling, Clemens and Czarnecki, Christian and Wolf, Martin R.},
  title     = {Projekt WiLMo - Wirtschaftsinformatik Lehr- und Lernmodule},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2023 : Tagungsband zur 36. AKWI-Jahrestagung},
  pages     = {161 -- 169},
  year      = {2023},
  abstract  = {Die potenziellen Auswirkungen der Digitalisierung auf die Lehre sind seit langem Gegenstand ausf{\"u}hrlicher Diskussionen innerhalb der Wirtschaftsinformatik (WI) (z. B. in Auth et al. 2021, Barton et al. 2019, Klotz et al. 2019). Nicht zuletzt der in nahezu allen Wirtschaftszweigen bestehende Mangel an qualifizierten Fachkr{\"a}ften lenkt den Diskurs auf einen verbesserten Zugang zu Bildung und gleichen Bildungschancen. Aus dieser Vision heraus und dem Schub der Digitalisierung entstehen Bildungskonzepte wie Open Educational Resources (OER), die gesellschaftlichen Problemen, wie dem des Fachkr{\"a}ftemangels, entgegenwirken sollen. Im Rahmen dieses Kurzbeitrags wird das Projekt WiLMo - "Wirtschaftsinformatik Lehr- und Lernmodule" vorgestellt. WiLMo wird im Rahmen von OERContent.nrw unter Beteiligung von sechs Hochschulen entwickelt und gef{\"o}rdert. Alle Projektbeteiligten arbeiten gemeinsam daran, einheitliche digitale Lehr- und Lernmaterialien im OER-Format f{\"u}r die Kernmodule der Wirtschaftsinformatik zu entwickeln und in garantiert hoher Qualit{\"a}t zur Verf{\"u}gung zu stellen.},
  language  = {de}
}
@article{SiepmannSchuhLevering1998,
  author    = {Siepmann, Thomas and Schuh, G. and Levering, V.},
  title     = {PROPLAN / Schuh, G.; Siepmann, Th.; Levering, V.},
  series = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  journal   = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-64453-9},
  pages     = {IX, 834 S. : graph. Darst.},
  year      = {1998},
  language  = {en}
}
@article{NiemuellerLakemeyerFerreinetal.2013,
  author    = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander and Reuter, S. and Ewert, D. and Jeschke, S. and Pensky, D. and Karras, Ulrich},
  title     = {Proposal for advancements to the LLSF in 2014 and beyond},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@book{FassbenderBuehlerMarkmannetal.2001,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard and Markmann, G. and Wunder, M.},
  title     = {Protokolle zur Replikation verteilter Daten},
  publisher = {FGAN-FKIE},
  address   = {Wachtberg},
  year      = {2001},
  language  = {de}
}
@article{KlompBitzHeerschapetal.2009,
  author    = {Klomp, D. W. J. and Bitz, Andreas and Heerschap, A. and Scheenen, T. W. J.},
  title     = {Proton spectroscopic imaging of the human prostate at 7 T},
  series = {NMR in Biomedicine},
  volume    = {22},
  journal   = {NMR in Biomedicine},
  number    = {5},
  issn      = {1099-1492},
  doi       = {10.1002/nbm.1360},
  pages     = {495 -- 501},
  year      = {2009},
  language  = {en}
}
@article{CollPeralesSchulteTiggesRondinoneetal.2022,
  author    = {Coll-Perales, Baldomero and Schulte-Tigges, Joschua and Rondinone, Michele and Gozalvez, Javier and Reke, Michael and Matheis, Dominik and Walter, Thomas},
  title     = {Prototyping and evaluation of infrastructure-assisted transition of control for cooperative automated vehicles},
  series = {IEEE Transactions on Intelligent Transportation Systems},
  volume    = {23},
  journal   = {IEEE Transactions on Intelligent Transportation Systems},
  number    = {7},
  publisher = {IEEE},
  issn      = {1524-9050 (Print)},
  doi       = {10.1109/TITS.2021.3061085},
  pages     = {6720 -- 6736},
  year      = {2022},
  abstract  = {Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.},
  language  = {en}
}
@book{BochmannRitz2013,
  author    = {Bochmann, Sandra and Ritz, Thomas},
  title     = {Prototyping tools for mobile applications},
  publisher = {Steinbeis-Ed.},
  address   = {Stuttgart},
  isbn      = {978-3-943356-45-8},
  pages     = {234 S. : Ill., graph. Darst.},
  year      = {2013},
  language  = {en}
}
@techreport{LessenichRitzWallenborn2014,
  author    = {Leßenich, Nina and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software : Potenziale benutzerfreundlicher Software-Entwicklung ; Info-Brosch{\"u}re},
  publisher = {eBusiness-Lotse},
  address   = {Aachen},
  pages     = {7 S. : Ill., graph. Darst.},
  year      = {2014},
  abstract  = {Mobile Anwendungen nehmen mit der Verbreitung von Smartphones zu. Die Akzeptanz der Nutzer bestimmt den Erfolg solcher mobiler Applikationen dabei maßgeblich. Um diese Anerkennung zu schaffen, ist eine m{\"o}glichst hohe Gebrauchstauglichkeit, auch Usability genannt, notwendig. Die Informationsbrosch{\"u}re „Prototyping zur Verbesserung der Benutzerfreundlichkeit mobiler Software" richtet sich an Personen, die an der Gestaltung und entwicklung von (mobiler) Software beteiligt sind. In dieser Brosch{\"u}re werden m{\"o}gliche Potenziale im Bereich einer effizienten und benutzerzentrierten Software-Entwicklung aufgezeigt.},
  language  = {de}
}
@article{NiemuellerFerreinEckeletal.2011,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Eckel, Gerhard and Pirro, David and Podbregar, Patrick and Kellner, Tobias and Rath, Christoph and Steinbauer, Gerald},
  title     = {Providing Ground-truth Data for the Nao Robot Platform},
  series = {RoboCup 2010: Robot Soccer World Cup XIV},
  journal   = {RoboCup 2010: Robot Soccer World Cup XIV},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-20217-9},
  pages     = {133 -- 144},
  year      = {2011},
  language  = {en}
}
@incollection{CzarneckiAuth2018,
  author    = {Czarnecki, Christian and Auth, Gunnar},
  title     = {Prozessdigitalisierung durch Robotic 7 Process Automation},
  series = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung},
  booktitle = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung},
  editor    = {Barton, Thomas and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {9783658227739},
  doi       = {10.1007/978-3-658-22773-9_7},
  pages     = {113 -- 131},
  year      = {2018},
  abstract  = {Im Rahmen der digitalen Transformation werden innovative Technologiekonzepte, wie z. B. das Internet der Dinge und Cloud Computing als Treiber f{\"u}r weitreichende Ver{\"a}nderungen von Organisationen und Gesch{\"a}ftsmodellen angesehen. In diesem Kontext ist Robotic Process Automation (RPA) ein neuartiger Ansatz zur Prozessautomatisierung, bei dem manuelle T{\"a}tigkeiten durch sogenannte Softwareroboter erlernt und automatisiert ausgef{\"u}hrt werden. Dabei emulieren Softwareroboter die Eingaben auf der bestehenden Pr{\"a}sentationsschicht, so dass keine {\"A}nderungen an vorhandenen Anwendungssystemen notwendig sind. Die innovative Idee ist die Transformation der bestehenden Prozessausf{\"u}hrung von manuell zu digital, was RPA von traditionellen Ans{\"a}tzen des Business Process Managements (BPM) unterscheidet, bei denen z. B. prozessgetriebene Anpassungen auf Ebene der Gesch{\"a}ftslogik notwendig sind. Am Markt werden bereits unterschiedliche RPA-L{\"o}sungen als Softwareprodukte angeboten. Gerade bei operativen Prozessen mit sich wiederholenden Verarbeitungsschritten in unterschiedlichen Anwendungssystemen sind gute Ergebnisse durch RPA dokumentiert, wie z. B. die Automatisierung von 35 \% der Backoffice-Prozesse bei Telefonica. Durch den vergleichsweise niedrigen Implementierungsaufwand verbunden mit einem hohen Automatisierungspotenzial ist in der Praxis (z. B. Banken, Telekommunikation, Energieversorgung) ein hohes Interesse an RPA vorhanden. Der Beitrag diskutiert RPA als innovativen Ansatz zur Prozessdigitalisierung und gibt konkrete Handlungsempfehlungen f{\"u}r die Praxis. Dazu wird zwischen modellgetriebenen und selbstlernenden Ans{\"a}tzen unterschieden. Anhand von generellen Architekturen von RPA-Systemen werden Anwendungsszenarien sowie deren Automatisierungspotenziale, aber auch Einschr{\"a}nkungen, diskutiert. Es folgt ein strukturierter Markt{\"u}berblick ausgew{\"a}hlter RPA-Produkte. Anhand von drei konkreten Anwendungsbeispielen wird die Nutzung von RPA in der Praxis verdeutlicht.},
  language  = {de}
}
@book{GunnarBartonBeigeletal.2017,
  author    = {Gunnar, Auth and Barton, Thomas and Beigel, Stefan and Bensberg, Frank and Brehm, Lars and Wolf, Martin R.},
  title     = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {297 Seiten},
  year      = {2017},
  language  = {de}
}
@incollection{HaukCzarneckiDietze2018,
  author    = {Hauk, Joachim and Czarnecki, Christian and Dietze, Christian},
  title     = {Prozessorientierte Messung der Customer Experience am Beispiel der Telekommunikationsindustrie},
  series = {Customer Experience im Zeitalter des Kunden : Best Practices, Lessons Learned und Forschungsergebnisse},
  booktitle = {Customer Experience im Zeitalter des Kunden : Best Practices, Lessons Learned und Forschungsergebnisse},
  editor    = {Rusnjak, Andreas and Schallmo, Daniel R. A.},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-18961-7},
  doi       = {10.1007/978-3-658-18961-7_7},
  pages     = {195 -- 216},
  year      = {2018},
  abstract  = {Hohe Wettbewerbsintensit{\"a}t und gestiegene Kundenanforderungen erfordern bei Telekommunikationsunternehmen eine aktive Gestaltung der Customer Experience (CX). Ein wichtiger Aspekt dabei ist die CX-Messung. Traditionelle Zufriedenheitsmessungen sind oft nicht ausreichend, um die Kundenerfahrung in komplexen Prozessen vollst{\"a}ndig zu erfassen. Daher wird in diesem Kapitel eine prozess{\"u}bergreifende Referenzl{\"o}sung zur CX-Messung am Beispiel der Telekommunikationsindustrie vorgeschlagen. Ausgangspunkt ist ein industriespezifisches Prozessmodell, das sich an dem Referenzmodell eTOM orientiert. Dieses wird um Messpunkte erweitert, die Schwachstellen in Bezug auf die CX identifizieren. F{\"u}r die erkannten Schwachstellen werden {\"u}ber eine Referenzmatrix m{\"o}gliche Ausl{\"o}ser abgeleitet und anhand von typischen Gesch{\"a}ftsfallmengen bewertet. Somit ist eine direkte Zuordnung und Erfolgsmessung konkreter Maßnahmen zur Behebung der Schwachstellen m{\"o}glich. Die so entwickelte Referenzl{\"o}sung wurde im Projekt K1 bei der Deutschen Telekom erfolgreich umgesetzt. Details zur Umsetzung werden als Fallstudien dargestellt.},
  language  = {de}
}
@article{LepersRakePuetter1976,
  author    = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.},
  title     = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen},
  series = {Elektro-Anzeiger},
  volume    = {29},
  journal   = {Elektro-Anzeiger},
  number    = {5},
  publisher = {Konradin},
  address   = {Leinfelden-Echterdingen},
  issn      = {0013-5518},
  pages     = {98 -- 101},
  year      = {1976},
  language  = {de}
}
@article{LepersRakePuetter1976,
  author    = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.},
  title     = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen in der Grundstoffindustrie},
  series = {Industrie-Anzeiger},
  volume    = {98},
  journal   = {Industrie-Anzeiger},
  number    = {17/18},
  publisher = {Konradin},
  address   = {Leinfelden-Echterdingen},
  issn      = {0019-9036},
  pages     = {286 -- 289},
  year      = {1976},
  language  = {de}
}
@inproceedings{BuxbaumSchwarteRingbecketal.2000,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and Heß, H. and Grothof, M.},
  title     = {Pseudo-Noise Laserradar zur schnellen 3D-Aufnahme auf Basis der PMD-Smart-Pixel Technologie - Prinzip und experimentelle Verifikation},
  series = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)},
  booktitle = {Bildverarbeitung im industriellen Einsatz : Tagung Stuttgart, 18. und 19. Oktober 2000 = Image processing and machine vision / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik. - (VDI-Berichte ; 1572)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091572-2},
  issn      = {0083-5560},
  pages     = {49 -- 59},
  year      = {2000},
  language  = {de}
}
@article{SchubaSchneiderHaverkort1998,
  author    = {Schuba, Marko and Schneider, Gaby and Haverkort, Boudewijn R.},
  title     = {QNA-MC: A Performance Evaluation Tool for Communication Networks with Multicast Data Streams / Schneider, G. ; Schuba, M. ; Haverkort, B. R.},
  series = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  journal   = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-64949-2},
  pages     = {105 -- 116},
  year      = {1998},
  language  = {en}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@inproceedings{SchneiderWisselinkCzarnecki2017,
  author    = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian},
  title     = {Qualitative Wertsch{\"o}pfungsanalyse von Anwendungsf{\"a}llen des Narrowband Internet of Things},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {184 -- 193},
  year      = {2017},
  abstract  = {Prim{\"a}re Ziele des Internets der Dinge sind die Steuerung physischer Gegenst{\"a}nde aus der Distanz und das Erfassen von Informationen aus dem Umfeld dieser Gegenst{\"a}nde. Dazu werden Hardwarekomponenten in Gegenst{\"a}nde des t{\"a}glichen Lebens und die Umwelt integriert. Mithilfe von Informations- und Kommunikationstechnologien entsteht hieraus das Internet der Dinge (Internet of Things, IoT). Vor einem Jahr wurde mit Narrowband Internet of Things (NB-IoT) eine Technologie die es erm{\"o}glicht, Hardwarekomponenten energieeffizient und unmittelbar {\"u}ber das Mobilfunknetz zu vernetzen. Gegenst{\"a}nde werden dadurch {\"u}ber große Reichweiten eigenst{\"a}ndig kommunikationsf{\"a}hig. Das IoT steht mit NB-IoT vor einem gestiegenen Nutzenpotenzial, da eine zunehmende Anzahl miteinander verbundener Gegenst{\"a}nde und der Austausch gr{\"o}ßerer Datenmengen realisierbar sind. Damit sind aus wirtschaftlicher Sicht neue, innovative Anwendungsf{\"a}lle des IoT m{\"o}glich, die auch bereits in der Praxis diskutiert werden. In diesem Beitrag wird anhand eines konkreten Anwendungsfalls untersucht, welche neuen Gesch{\"a}fts- bzw. Partnermodelle durch die gemeinsame Nutzung von NB-IoT-Daten und Big Data-Technologien entstehen und welcher qualitative Mehrwert f{\"u}r die an einem Anwendungsfall beteiligten Stakeholder geschaffen wird. Dazu wird - einem konstruktionsorientierten Forschungsansatz folgend - ein Bewertungsrahmen zur qualitativen Wertsch{\"o}pfungsanalyse von NB-IoT entwickelt, der u.a. auf der Schablone nach Cockburn und dem Business Model Canvas basiert. Anhand dieses Bewertungsrahmens wird ein Anwendungsfall untersucht, der in anonymisierter Form an konkrete Praxisprojekte angelehnt ist. Konkret wird ein Anwendungsfall betrachtet, der einen Fahrradverleih 2.0 basierend auf dem Einsatz von NB-IoT vorschl{\"a}gt. Aus den Untersuchungsergebnissen gehen beispielsweise Erkenntnisse hervor, wie Gesch{\"a}ftsmodelle auf},
  language  = {de}
}
@article{FerreinSchifferLakemeyer2006,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  journal   = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  publisher = {Univ.},
  address   = {Bremen},
  isbn      = {3-88722-666-6},
  pages     = {3 -- 14},
  year      = {2006},
  language  = {en}
}
@article{SiepmannSchuhWebersberger1997,
  author    = {Siepmann, Thomas and Schuh, G. and Webersberger, P.},
  title     = {Qualit{\"a}tshandbuch und Prozesspl{\"a}ne im INTRANET / Schuh, G.; Webersberger, P.; Siepmann, Th.},
  series = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)},
  journal   = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)},
  year      = {1997},
  language  = {de}
}
@article{SchollPalmLehmannetal.1997,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus},
  title     = {Quantitative Analyse der Stimmlippen},
  series = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  journal   = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  publisher = {Zentralstelle f{\"u}r Forschungsf{\"o}rderung und Technologietransfer},
  address   = {Freiburg},
  isbn      = {3-9805054-2-1},
  pages     = {81 -- 86},
  year      = {1997},
  language  = {de}
}
@article{SchollPalmLehmannetal.1998,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas and Spitzer, Klaus},
  title     = {Quantitative Farbmessung in laryngoskopischen Bildern. Palm, C; Scholl, I; Lehmann, TM; Spitzer, K.},
  series = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  journal   = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63885-7},
  pages     = {412 -- 416},
  year      = {1998},
  language  = {en}
}
@article{HillgaertnerKappel2006,
  author    = {Hillg{\"a}rtner, Michael and Kappel, U.},
  title     = {Radiating Impedance of Mains Cabling During Emissions Testing},
  series = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  journal   = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  address   = {Barcelona},
  isbn      = {84-689-9439-1},
  pages     = {17 -- 22},
  year      = {2006},
  language  = {en}
}
@article{NoureddineKraffLaddetal.2019,
  author    = {Noureddine, Yacine and Kraff, Oliver and Ladd, Mark E. and Wrede, Karsten and Chen, Bixia and Quick, Harald H. and Schaefers, Georg and Bitz, Andreas},
  title     = {Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips},
  series = {Magnetic Resonance in Medicine},
  journal   = {Magnetic Resonance in Medicine},
  number    = {Early view},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.27835},
  pages     = {1 -- 17},
  year      = {2019},
  language  = {en}
}
@inproceedings{EngelsSchnabel2012,
  author    = {Engels, Elmar and Schnabel, Holger},
  title     = {Rapid-control-prototyping of industrial drives for the sercos automation bus},
  series = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  booktitle = {13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan \& 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)},
  isbn      = {978-1-4673-4771-6},
  pages     = {177 -- 181},
  year      = {2012},
  abstract  = {This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.},
  language  = {en}
}
@inproceedings{RitschelStenzelCzarneckietal.2021,
  author    = {Ritschel, Konstantin and Stenzel, Adina and Czarnecki, Christian and Hong, Chin-Gi},
  title     = {Realizing robotic process automation potentials: an architectural perspective on a real-life implementation case},
  series = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability},
  booktitle = {GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science \& Sustainability},
  editor    = {Gesellschaft f{\"u}r Informatik e.V. (GI),},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885797081},
  issn      = {1617-5468},
  doi       = {10.18420/informatik2021-108},
  pages     = {1303 -- 1311},
  year      = {2021},
  abstract  = {The initial idea of Robotic Process Automation (RPA) is the automation of business processes through a simple emulation of user input and output by software robots. Hence, it can be assumed that no changes of the used software systems and existing Enterprise Architecture (EA) is required. In this short, practical paper we discuss this assumption based on a real-life implementation project. We show that a successful RPA implementation might require architectural work during analysis, implementation, and migration. As practical paper we focus on exemplary lessons-learned and new questions related to RPA and EA.},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2011,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Reasoning with Qualitative Positional Information for Domestic Domains in the Situation Calculus},
  series = {Journal of Intelligent \& Robotic Systems},
  volume    = {63},
  journal   = {Journal of Intelligent \& Robotic Systems},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {0921-0296},
  pages     = {273 -- 300},
  year      = {2011},
  language  = {en}
}
@inproceedings{EppleBrandesGligorevicetal.2009,
  author    = {Epple, U. and Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael},
  title     = {Receiver optimization for L-DACS1},
  series = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.},
  booktitle = {IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-4078-8},
  pages     = {4B1-1 -- 4B1-12},
  year      = {2009},
  language  = {en}
}
@book{SchubaSpaniolLinnhoffPopien1995,
  author    = {Schuba, Marko and Spaniol, Otto and Linnhoff-Popien, Claudia},
  title     = {Rechnerstrukturen : Skript zur Vorlesung an der RWTH Aachen / Spaniol, Otto ; Linnhoff-Popien, Claudia ; Schuba, Marko},
  publisher = {Verl. der Augustinus-Buchh.},
  address   = {Aachen},
  isbn      = {3-86073-147-5},
  pages     = {V, 134 S. : graph. Darst.},
  year      = {1995},
  language  = {de}
}
@inproceedings{EndressBragard2017,
  author    = {Endress, Tim and Bragard, Michael},
  title     = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench},
  series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-5386-3846-0},
  doi       = {10.1109/RTUCON.2017.8124775},
  pages     = {5 Seiten},
  year      = {2017},
  abstract  = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.},
  language  = {en}
}
@article{HagemannGeittnerWarnieretal.1985,
  author    = {Hagemann, Hans-J{\"u}rgen and Geittner, P. and Warnier, J. and Weling, F.},
  title     = {Reduction of geometric taper losses in the PCVD process. Geittner, P.; Hagemann, H. J.; Warnier, J.; Weling, F.; Wilson, H.},
  series = {Electronics letters : an intern. publication / The Institution of Electrical Engineers. 21 (1985), H. 13},
  journal   = {Electronics letters : an intern. publication / The Institution of Electrical Engineers. 21 (1985), H. 13},
  isbn      = {0013-5194},
  pages     = {870 -- 871},
  year      = {1985},
  language  = {en}
}
@article{Hagemann1978,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Reduction of hysteresis losses of ferroelectric BaTiO3. Hagemann, H. J.},
  series = {Ferroelectrics. 22 (1978)},
  journal   = {Ferroelectrics. 22 (1978)},
  isbn      = {0015-0193},
  pages     = {743 -- 743},
  year      = {1978},
  language  = {en}
}
@inproceedings{HueningWacheMagiera2021,
  author    = {H{\"u}ning, Felix and Wache, Franz-Josef and Magiera, David},
  title     = {Redundant bus systems using dual-mode radio},
  series = {Proceedings of Sixth International Congress on Information and Communication Technology},
  booktitle = {Proceedings of Sixth International Congress on Information and Communication Technology},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-16-2379-0},
  doi       = {10.1007/978-981-16-2380-6_73},
  pages     = {835 -- 842},
  year      = {2021},
  abstract  = {Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.},
  language  = {en}
}
@article{Engels2000,
  author    = {Engels, Elmar},
  title     = {Reduzierung der horizontalen Massenkr{\"a}fte bei Pressen mit Raumlenkerantrieb},
  series = {UTF-science : Forschungsmagazin f{\"u}r die Produktionstechnik. 1 (2000), H. 3},
  journal   = {UTF-science : Forschungsmagazin f{\"u}r die Produktionstechnik. 1 (2000), H. 3},
  pages     = {17 S.},
  year      = {2000},
  language  = {de}
}
@techreport{KraetzigRoedelMeyeretal.2013,
  author    = {Kr{\"a}tzig, Thomas and R{\"o}del, Sascha and Meyer, Lorenz and G{\"u}nthert, Wolfgang},
  title     = {Reduzierung von Wasserverlusten mittels energieautarker Mess- und Steuereinheiten - Smart Water Power : Schlussbericht : Berichtszeitraum 01.10.2010 - 31.03.2013 : F{\"o}rderkennzeichen 02WQ1172-74},
  publisher = {Bundesministerium f{\"u}r Bildung und Forschung},
  address   = {Bonn},
  pages     = {86 S.},
  year      = {2013},
  language  = {de}
}
@article{Fassbender2001,
  author    = {Faßbender, Heinz},
  title     = {Reengineering an Ada95-programmed command and control information system by using UML},
  series = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)},
  journal   = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {1-58113-392-8},
  pages     = {53 -- 60},
  year      = {2001},
  language  = {en}
}
@book{CzarneckiDietze2017,
  author    = {Czarnecki, Christian and Dietze, Christian},
  title     = {Reference architecture for the telecommunications industry: Transformation of strategy, organization, processes, data, and applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-46755-9 (Print)},
  doi       = {10.1007/978-3-319-46757-3},
  pages     = {XXII, 253 Seiten},
  year      = {2017},
  abstract  = {This book reflects the tremendous changes in the telecommunications industry in the course of the past few decades - shorter innovation cycles, stiffer competition and new communication products. It analyzes the transformation of processes, applications and network technologies that are now expected to take place under enormous time pressure. The International Telecommunication Union (ITU) and the TM Forum have provided reference solutions that are broadly recognized and used throughout the value chain of the telecommunications industry, and which can be considered the de facto standard. The book describes how these reference solutions can be used in a practical context: it presents the latest insights into their development, highlights lessons learned from numerous international projects and combines them with well-founded research results in enterprise architecture management and reference modeling. The complete architectural transformation is explained, from the planning and set-up stage to the implementation. Featuring a wealth of examples and illustrations, the book offers a valuable resource for telecommunication professionals, enterprise architects and project managers alike.},
  language  = {en}
}
@article{CzarneckiWinkelmannSpiliopoulou2013,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Referenzprozessabl{\"a}ufe f{\"u}r Telekommunikationsunternehmen: Eine Erweiterung des eTOM-Modells},
  series = {Wirtschaftsinformatik},
  volume    = {55},
  journal   = {Wirtschaftsinformatik},
  number    = {2},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  issn      = {1861-8936},
  doi       = {10.1007/s11576-013-0351-9},
  pages     = {83 -- 97},
  year      = {2013},
  abstract  = {Der Telekommunikationsmarkt erf{\"a}hrt substanzielle Ver{\"a}nderungen. Neue Gesch{\"a}ftsmodelle, innovative Dienstleistungen und Technologien erfordern Reengineering, Transformation und Prozessstandardisierung. Mit der Enhanced Telecom Operation Map (eTOM) bietet das TM Forum ein international anerkanntes de facto Referenz-Prozess-Framework basierend auf spezifischen Anforderungen und Auspr{\"a}gungen der Telekommunikationsindustrie an. Allerdings enth{\"a}lt dieses Referenz-Framework nur eine hierarchische Sammlung von Prozessen auf unterschiedlichen Abstraktionsebenen. Eine Kontrollsicht verstanden als sequenzielle Anordnung von Aktivit{\"a}ten und daraus resultierend ein realer Prozessablauf fehlt ebenso wie eine Ende-zu-Ende-Sicht auf den Kunden. In diesem Artikel erweitern wir das eTOM-Referenzmodell durch Referenzprozessabl{\"a}ufe, in welchen wir das Wissen {\"u}ber Prozesse in Telekommunikationsunternehmen abstrahieren und generalisieren. Durch die Referenzprozessabl{\"a}ufe werden Unternehmen bei dem strukturierten und transparenten (Re-)Design ihrer Prozesse unterst{\"u}tzt. Wir demonstrieren die Anwendbarkeit und N{\"u}tzlichkeit unserer Referenzprozessabl{\"a}ufe in zwei Fallstudien und evaluieren diese anhand von Kriterien f{\"u}r die Bewertung von Referenzmodellen. Die Referenzprozessabl{\"a}ufe wurden vom TM Forum in den Standard aufgenommen und als Teil von eTOM Version 9 ver{\"o}ffentlicht. Dar{\"u}ber hinaus diskutieren wir die Komponenten unseres Ansatzes, die auch außerhalb der Telekommunikationsindustrie angewandt werden k{\"o}nnen.},
  language  = {de}
}
@article{LepersRakePuetter1976,
  author    = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.},
  title     = {Regelung der Qualitaet beim Brennen von Zementklinker},
  series = {Regelungstechnische Praxis : rtp},
  volume    = {18},
  journal   = {Regelungstechnische Praxis : rtp},
  number    = {4},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  issn      = {0340-4730},
  pages     = {87 -- 91},
  year      = {1976},
  language  = {de}
}
@book{Siepmann1987,
  author    = {Siepmann, Thomas},
  title     = {Reibmomente in Zylinderrollenlagern f{\"u}r Planetenr{\"a}der},
  address   = {Bochum},
  isbn      = {3-89194-068-8},
  pages     = {279 S. : graph. Darst.},
  year      = {1987},
  language  = {de}
}
@article{UmutluOrzadaKinneretal.2011,
  author    = {Umutlu, Lale and Orzada, Stephan and Kinner, Sonja and Maderwald, Stefan and Bronte, Irina and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Antoch, Gerald and Ladd, Mark E. and Quick, Harald H. and Lauenstein, Thomas C.},
  title     = {Renal imaging at 7 Tesla: preliminary results},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1084},
  pages     = {841 -- 849},
  year      = {2011},
  abstract  = {Objective To investigate the feasibility of 7T MR imaging of the kidneys utilising a custom-built 8-channel transmit/receive radiofrequency body coil. Methods In vivo unenhanced MR was performed in 8 healthy volunteers on a 7T whole-body MR system. After B0 shimming the following sequences were obtained: 1) 2D and 3D spoiled gradient-echo sequences (FLASH, VIBE), 2) T1-weighted 2D in and opposed phase 3) True-FISP imaging and 4) a T2-weighted turbo spin echo (TSE) sequence. Visual evaluation of the overall image quality was performed by two radiologists. Results Renal MRI at 7T was feasible in all eight subjects. Best image quality was found using T1-weighted gradient echo MRI, providing high anatomical details and excellent conspicuity of the non-enhanced vasculature. With successful shimming, B1 signal voids could be effectively reduced and/or shifted out of the region of interest in most sequence types. However, T2-weighted TSE imaging remained challenging and strongly impaired because of signal heterogeneities in three volunteers. Conclusion The results demonstrate the feasibility and diagnostic potential of dedicated 7T renal imaging. Further optimisation of imaging sequences and dedicated RF coil concepts are expected to improve the acquisition quality and ultimately provide high clinical diagnostic value.},
  language  = {en}
}
@article{Alt1992,
  author    = {Alt, Helmut},
  title     = {Renditevergleich zwischen Immobilien und Festverzinslichen},
  series = {Die Bank},
  journal   = {Die Bank},
  number    = {H. 2},
  issn      = {0342-3182},
  pages     = {91 -- 92},
  year      = {1992},
  language  = {de}
}
@article{FerreinMiesLakemeyer2008,
  author    = {Ferrein, Alexander and Mies, Christoph and Lakemeyer, Gerhard},
  title     = {Repairing Decision-Theoretic Policies Using Goal-Oriented Planning / Mies, Christoph ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings},
  journal   = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-85844-7},
  pages     = {267 -- 275},
  year      = {2008},
  language  = {en}
}
@inproceedings{ZaehlBiewendtWolfetal.2022,
  author    = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin R. and Eggert, Mathias},
  title     = {Requirements for competence developing games in the environment of SE Competence Development},
  series = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  booktitle = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  publisher = {GITO},
  address   = {Berlin},
  isbn      = {978-3-95545-409-8},
  doi       = {10.30844/AKWI_2022_05},
  pages     = {73 -- 88},
  year      = {2022},
  abstract  = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.},
  language  = {en}
}
@incollection{AltherrLeise2021,
  author    = {Altherr, Lena and Leise, Philipp},
  title     = {Resilience as a concept for mastering uncertainty},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9},
  pages     = {412 -- 417},
  year      = {2021},
  language  = {en}
}
@inproceedings{LorenzAltherrPelz2020,
  author    = {Lorenz, Imke-Sophie and Altherr, Lena and Pelz, Peter F.},
  title     = {Resilience enhancement of critical infrastructure - graph-theoretical resilience analysis of the water distribution system in the German city of Darmstadt},
  series = {14th WCEAM Proceedings},
  booktitle = {14th WCEAM Proceedings},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-64228-0},
  doi       = {10.1007/978-3-030-64228-0_13},
  pages     = {137 -- 149},
  year      = {2020},
  abstract  = {Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of water distribution systems (WDS), i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, graph-theoretical metrics have been proposed. In this study, a promising approach is first physically derived analytically and then applied to assess the resilience of the WDS for a district in a major German City. The topology based resilience index computed for every consumer node takes into consideration the resistance of the best supply path as well as alternative supply paths. This resistance of a supply path is derived to be the dimensionless pressure loss in the pipes making up the path. The conducted analysis of a present WDS provides insight into the process of actively influencing the resilience of WDS locally and globally by adding pipes. The study shows that especially pipes added close to the reservoirs and main branching points in the WDS result in a high resilience enhancement of the overall WDS.},
  language  = {en}
}
@article{AltherrBroetzDietrichetal.2018,
  author    = {Altherr, Lena and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Kloberdanz, Hermann and Leise, Philipp and Pelz, Peter Franz and Schlemmer, Pia and Schmitt, Andreas},
  title     = {Resilience in mechanical engineering - a concept for controlling uncertainty during design, production and usage phase of load-carrying structures},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  isbn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.187},
  pages     = {187 -- 198},
  year      = {2018},
  abstract  = {Resilience as a concept has found its way into different disciplines to describe the ability of an individual or system to withstand and adapt to changes in its environment. In this paper, we provide an overview of the concept in different communities and extend it to the area of mechanical engineering. Furthermore, we present metrics to measure resilience in technical systems and illustrate them by applying them to load-carrying structures. By giving application examples from the Collaborative Research Centre (CRC) 805, we show how the concept of resilience can be used to control uncertainty during different stages of product life.},
  language  = {en}
}
@article{HeuermannBaumannFauthetal.1994,
  author    = {Heuermann, Holger and Baumann, F.-M. and Fauth, G. and Albert, M.},
  title     = {Results of Network Analyzer Measurements with Leakage Errors Corrected with the TMS-15-Term Procedure},
  series = {On-Line Moisture Analysis of Raw Coal},
  journal   = {On-Line Moisture Analysis of Raw Coal},
  pages     = {1361 -- 1364},
  year      = {1994},
  language  = {en}
}