@article{KolditzAlbinAbeletal.2016,
  author    = {Kolditz, Melanie and Albin, Thivaharan and Abel, Dirk and Fasse, Alessandro and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Evaluation of foot position and orientation as manipulated variables to control external knee adduction moments in leg extension training},
  series = {Computer methods and programs in biomedicine},
  volume    = {171},
  journal   = {Computer methods and programs in biomedicine},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-2607},
  doi       = {10.1016/j.cmpb.2016.09.005},
  pages     = {81 -- 86},
  year      = {2016},
  abstract  = {Background and Objective Effective leg extension training at a leg press requires high forces, which need to be controlled to avoid training-induced damage. In order to avoid high external knee adduction moments, which are one reason for unphysiological loadings on knee joint structures, both training movements and the whole reaction force vector need to be observed. In this study, the applicability of lateral and medial changes in foot orientation and position as possible manipulated variables to control external knee adduction moments is investigated. As secondary parameters both the medio-lateral position of the center of pressure and the frontal-plane orientation of the reaction force vector are analyzed. Methods Knee adduction moments are estimated using a dynamic model of the musculoskeletal system together with the measured reaction force vector and the motion of the subject by solving the inverse kinematic and dynamic problem. Six different foot conditions with varying positions and orientations of the foot in a static leg press are evaluated and compared to a neutral foot position. Results Both lateral and medial wedges under the foot and medial and lateral shifts of the foot can influence external knee adduction moments in the presented study with six healthy subjects. Different effects are observed with the varying conditions: the pose of the leg is changed and the direction and center of pressure of the reaction force vector is influenced. Each effect results in a different direction or center of pressure of the reaction force vector. Conclusions The results allow the conclusion that foot position and orientation can be used as manipulated variables in a control loop to actively control knee adduction moments in leg extension training.},
  language  = {en}
}
@article{TrzewikTemizArtmannLinderetal.2004,
  author    = {Trzewik, J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Linder, Peter and Demirci, T. and Digel, Ilya and Artmann, Gerhard},
  title     = {Evaluation of lateral mechanical tension in thin-film tissue constructs},
  series = {Annals of Biomedical Engineering. 32 (2004), H. 9},
  journal   = {Annals of Biomedical Engineering. 32 (2004), H. 9},
  isbn      = {1573-9686},
  pages     = {1243 -- 1251},
  year      = {2004},
  language  = {en}
}
@article{RothTippkoetter2016,
  author    = {Roth, Jasmine and Tippk{\"o}tter, Nils},
  title     = {Evaluation of lignocellulosic material for butanol production using enzymatic hydrolysate medium},
  series = {Cellulose Chemistry and Technology},
  volume    = {50},
  journal   = {Cellulose Chemistry and Technology},
  number    = {3-4},
  publisher = {Editura Academiei Romane},
  address   = {Bukarest},
  pages     = {405 -- 410},
  year      = {2016},
  abstract  = {Butanol is a promising gasoline additive and platform chemical that can be readily produced via acetone-butanolethanol (ABE) fermentation from pretreated lignocellulosic materials. This article examines lignocellulosic material from beech wood for ABE fermentation, using Clostridium acetobutylicum. First, the utilization of both C₅₋ (xylose) and C₆₋ (glucose) sugars as sole carbon source was investigated in static cultivation, using serum bottles and synthetic medium. The utilization of pentose sugar resulted in a solvent yield of 0.231 g·g_sugar⁻¹, compared to 0.262 g·g_sugar⁻¹ using hexose. Then, the Organosolv pretreated crude cellulose fibers (CF) were enzymatically decomposed, and the resulting hydrolysate medium was analyzed for inhibiting compounds (furans, organic acids, phenolics) and treated with ionexchangers for detoxification. Batch fermentation in a bioreactor using CF hydrolysate medium resulted in a total solvent yield of 0.20 gABE·g_sugar⁻¹.},
  language  = {en}
}
@article{SalpatiChuChenetal.2014,
  author    = {Salpati, Laurent and Chu, Xiaoyan and Chen, Liangfu and Prasad, Bhagwat and Dallas, Shannon and Evers, Raymond and Mamaril-Fishman, Donna and Geier, Ethan G. and Kehler, Jonathan and Kunta, Jeevan and Mezler, Mario and Laplanche, Loic and Pang, Jodie and Soars, Matthew G. and Unadkat, Jashvant D. and van Waterschoot, Robert A.B. and Yabut, Jocelyn and Schinkel, Alfred H. and Scheer, Nico and Rode, Anja},
  title     = {Evaluation of organic anion transporting polypeptide 1B1 and 1B3 humanized mice as a translational model to study the pharmacokinetics of statins},
  series = {Drug Metabolism and Disposition},
  volume    = {42},
  journal   = {Drug Metabolism and Disposition},
  number    = {8},
  publisher = {ASPET},
  address   = {Bethesda, Md.},
  issn      = {1521-009X},
  doi       = {10.1124/dmd.114.057976},
  pages     = {1301 -- 1313},
  year      = {2014},
  abstract  = {Organic anion transporting polypeptide (Oatp) 1a/1b knockout and OATP1B1 and -1B3 humanized mouse models are promising tools for studying the roles of these transporters in drug disposition. Detailed characterization of these models will help to better understand their utility for predicting clinical outcomes. To advance this approach, we carried out a comprehensive analysis of these mouse lines by evaluating the compensatory changes in mRNA expression, quantifying the amounts of OATP1B1 and -1B3 protein by liquid chromatography-tandem mass spectrometry, and studying the active uptake in isolated hepatocytes and the pharmacokinetics of some prototypical substrates including statins. Major outcomes from these studies were 1) mostly moderate compensatory changes in only a few genes involved in drug metabolism and disposition, 2) a robust hepatic expression of OATP1B1 and -1B3 proteins in the respective humanized mouse models, and 3) functional activities of the human transporters in hepatocytes isolated from the humanized models with several substrates tested in vitro and with pravastatin in vivo. However, the expression of OATP1B1 and -1B3 in the humanized models did not significantly alter liver or plasma concentrations of rosuvastatin and pitavastatin compared with Oatp1a/1b knockout controls under the conditions used in our studies. Hence, although the humanized OATP1B1 and -1B3 mice showed in vitro and/or in vivo functional activity with some statins, further characterization of these models is required to define their potential use and limitations in the prediction of drug disposition and drug-drug interactions in humans.},
  language  = {en}
}
@article{Helsper1979,
  author    = {Helsper, Christoph},
  title     = {Evaluation of Particle Size Distributions by Means of Particle Counters / Fißan, H. J. ; Helsper, C.},
  series = {Proceedings of the First Workshop of Particulate Control : 16. - 17. March 1978, Kernforschung-sanlage J{\"u}lich GmbH / prepared by U.S. Environmental Protection Agency, Off. of Research and Development, Washington, D.C, 1979,},
  journal   = {Proceedings of the First Workshop of Particulate Control : 16. - 17. March 1978, Kernforschung-sanlage J{\"u}lich GmbH / prepared by U.S. Environmental Protection Agency, Off. of Research and Development, Washington, D.C, 1979,},
  publisher = {Zentralbibliothek d. Kernforschungsanlage J{\"u}lich [in Komm.]},
  address   = {J{\"u}lich},
  pages     = {495 S.: Ill., graph. Darst.},
  year      = {1979},
  language  = {en}
}
@article{HeinkeKnickerAlbracht2018,
  author    = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten},
  title     = {Evaluation of passively induced shoulder stretch reflex using an isokinetic dynamometer in male overhead athletes},
  series = {Isokinetics and Exercise Science},
  volume    = {26},
  journal   = {Isokinetics and Exercise Science},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1878-5913},
  doi       = {10.3233/IES-184111},
  pages     = {265 -- 274},
  year      = {2018},
  abstract  = {BACKGROUND: Muscle stretch reflexes are widely considered to beneficially influence joint stability and power generation in the lower limbs. While in the upper limbs and especially in the muscles surrounding the shoulder joint such evidence is lacking. OBJECTIVE: To quantify the electromyographical response in the muscles crossing the shoulder of specifically trained overhead athletes to an anterior perturbation force. METHODS: Twenty healthy male participants performed six sets of different external shoulder rotation stretches on an isokinetic dynamometer over a range of amplitudes and muscle pre-activation moment levels. All stretches were applied with a dynamometer acceleration of 10,000∘/s2 and a velocity of 150∘/s. Electromyographical response was measured via sEMG. RESULTS: Consistent reflexes were not observed in all experimental conditions. The reflex latencies revealed a significant muscle main effect (F (2,228) = 99.31, p< 0.001; η2= 0.466; f= 0.934) and a pre-activation main effect (F (1,228) = 142.21, p< 0.001; η2= 0.384; f= 1.418). The stretch reflex amplitude yielded a significant pre-activation main effect (F (1,222) = 470.373, p< 0.001; η2= 0.679; f= 1.454). CONCLUSION: Short latency muscle reflexes showed a tendency to an anterior to posterior muscle recruitment whereby the main internal rotator muscles of the shoulder revealed the most consistent results.},
  language  = {en}
}
@article{AgrafiotisMavroidisKonstandopoulosetal.2007,
  author    = {Agrafiotis, Christos C. and Mavroidis, Ilias and Konstandopoulos, Athansios G. and Hoffschmidt, Bernhard and Stobbe, Per and Romero, Manuel and Fernandez-Quero, Valerio},
  title     = {Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation},
  series = {Solar energy materials and solar cells},
  volume    = {Vol. 91},
  journal   = {Solar energy materials and solar cells},
  number    = {Iss. 6},
  issn      = {1879-3398 (E-Journal); 0927-0248 (Print)},
  pages     = {474 -- 488},
  year      = {2007},
  language  = {en}
}
@article{NgamgaBialonskiMarwanetal.2016,
  author    = {Ngamga, Eulalie Joelle and Bialonski, Stephan and Marwan, Norbert and Kurths, J{\"u}rgen and Geier, Christian and Lehnertz, Klaus},
  title     = {Evaluation of selected recurrence measures in discriminating pre-ictal and inter-ictal periods from epileptic EEG data},
  series = {Physics Letters A},
  volume    = {380},
  journal   = {Physics Letters A},
  number    = {16},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0375-9601},
  doi       = {10.1016/j.physleta.2016.02.024},
  pages     = {1419 -- 1425},
  year      = {2016},
  abstract  = {We investigate the suitability of selected measures of complexity based on recurrence quantification analysis and recurrence networks for an identification of pre-seizure states in multi-day, multi-channel, invasive electroencephalographic recordings from five epilepsy patients. We employ several statistical techniques to avoid spurious findings due to various influencing factors and due to multiple comparisons and observe precursory structures in three patients. Our findings indicate a high congruence among measures in identifying seizure precursors and emphasize the current notion of seizure generation in large-scale epileptic networks. A final judgment of the suitability for field studies, however, requires evaluation on a larger database.},
  language  = {en}
}
@article{LeingartnerMaurerFerreinetal.2016,
  author    = {Leingartner, Max and Maurer, Johannes and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Evaluation of Sensors and Mapping Approaches for Disasters in Tunnels},
  series = {Journal of Field Robotics},
  volume    = {33},
  journal   = {Journal of Field Robotics},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1556-4967},
  doi       = {10.1002/rob.21611},
  pages     = {1037 -- 1057},
  year      = {2016},
  abstract  = {Ground or aerial robots equipped with advanced sensing technologies, such as three-dimensional laser scanners and advanced mapping algorithms, are deemed useful as a supporting technology for first responders. A great deal of excellent research in the field exists, but practical applications at real disaster sites are scarce. Many projects concentrate on equipping robots with advanced capabilities, such as autonomous exploration or object manipulation. In spite of this, realistic application areas for such robots are limited to teleoperated reconnaissance or search. In this paper, we investigate how well state-of-the-art and off-the-shelf components and algorithms are suited for reconnaissance in current disaster-relief scenarios. The basic idea is to make use of some of the most common sensors and deploy some widely used algorithms in a disaster situation, and to evaluate how well the components work for these scenarios. We acquired the sensor data from two field experiments, one from a disaster-relief operation in a motorway tunnel, and one from a mapping experiment in a partly closed down motorway tunnel. Based on these data, which we make publicly available, we evaluate state-of-the-art and off-the-shelf mapping approaches. In our analysis, we integrate opinions and replies from first responders as well as from some algorithm developers on the usefulness of the data and the limitations of the deployed approaches, respectively. We discuss the lessons we learned during the two missions. These lessons are interesting for the community working in similar areas of urban search and rescue, particularly reconnaissance and search.},
  language  = {en}
}
@article{MuellerVeggianBeuscherHaenni1978,
  author    = {M{\"u}ller-Veggian, Mattea and Beuscher, H. and Haenni, D. R.},
  title     = {Evidence for a 10⁺ isomer in ¹³⁴ Ce},
  series = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  journal   = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {30 -- 32},
  year      = {1978},
  language  = {en}
}
@article{ArtmannTrzewikMallipattuetal.2001,
  author    = {Artmann, Gerhard and Trzewik, J{\"u}rgen and Mallipattu, S. K. and Delano, F. A. [u.a.]},
  title     = {Evidence for a second valve system in Lymphatics: Endothelial Microvalves. Trzewik, J{\"u}rgen; Mallipattu, S. K.; Artmann, Gerhard Michael; Delano, F. A.; Schmid-Schonbein, G. W},
  series = {The FASEB Journal. 15 (2001)},
  journal   = {The FASEB Journal. 15 (2001)},
  isbn      = {1530-6860},
  pages     = {1711 -- 1717},
  year      = {2001},
  language  = {en}
}
@article{Hillen1980,
  author    = {Hillen, Walter},
  title     = {Evidence for a spin-1 gluon in three-jet events. TASSO Collaboration},
  series = {Physics Letters B. 97 (1980), H. 3-4},
  journal   = {Physics Letters B. 97 (1980), H. 3-4},
  isbn      = {0370-2693},
  pages     = {453 -- 458},
  year      = {1980},
  language  = {en}
}
@article{Hillen1981,
  author    = {Hillen, Walter},
  title     = {Evidence for charged primary partons in e+e\&\#8722; \&\#8594; 2 jets. TASSO Collaboration},
  series = {Physics Letters B. 100 (1981), H. 4},
  journal   = {Physics Letters B. 100 (1981), H. 4},
  isbn      = {0370-2693},
  pages     = {357 -- 363},
  year      = {1981},
  language  = {en}
}
@article{MuellerVeggianNeskakisLieder1976,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M.},
  title     = {Evidence for h₉₂ proton induced backbending in the Os region : investigation of the nuclei ¹⁸¹ Re, ¹⁸¹⁻¹⁸⁴ Os},
  series = {Nuclear physics A},
  volume    = {261},
  journal   = {Nuclear physics A},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0375-9474},
  doi       = {10.1016/0375-9474(76)90565-0},
  pages     = {189 -- 222},
  year      = {1976},
  language  = {en}
}
@article{Hillen1979,
  author    = {Hillen, Walter},
  title     = {Evidence for planar events in e+e\&\#8722; annihilation at high energies. TASSO Collaboration},
  series = {Physics Letters B. 86 (1979), H. 2},
  journal   = {Physics Letters B. 86 (1979), H. 2},
  isbn      = {0370-2693},
  pages     = {243 -- 249},
  year      = {1979},
  language  = {en}
}
@article{MuellerVeggianNeskakisLiederetal.1975,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M. and Beuscher, H.},
  title     = {Evidence for proton backbending in the Os region},
  series = {Bollettino della Societ{\`a} Italiana di Fisica},
  volume    = {1975},
  journal   = {Bollettino della Societ{\`a} Italiana di Fisica},
  publisher = {Zanichelli},
  address   = {Bologna},
  isbn      = {0037-8801},
  pages     = {61},
  year      = {1975},
  language  = {en}
}
@article{MuellerVeggianNeskakisLieder1975,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M.},
  title     = {Evidence for proton backbending in the Os region},
  series = {International Symposium on Highly Excited States in Nuclei held at J{\"u}lich from 23-26 September 1975 : proceedings / edited by A. Faessler ... ; organized by the Institute of Nuclear Physics of the Kernforschungsanlage J{\"u}lich GmbH. - Vol. 1},
  journal   = {International Symposium on Highly Excited States in Nuclei held at J{\"u}lich from 23-26 September 1975 : proceedings / edited by A. Faessler ... ; organized by the Institute of Nuclear Physics of the Kernforschungsanlage J{\"u}lich GmbH. - Vol. 1},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {66},
  year      = {1975},
  language  = {en}
}
@article{DachwaldCarnelliVasile2006,
  author    = {Dachwald, Bernd and Carnelli, I. and Vasile, M.},
  title     = {Evolutionary Neurocontrol as a Novel Method for Low-Thrust Gravity Assist Trajectory Optimization / I. Carnelli ; B. Dachwald ; M. Vasile},
  series = {Proceedings of the Twenty-Fifth International Symposium on Space Technology and Science (Selected papers) : Kanazawa, [June 4 through June 11, 2006, at Kanazawa-shi Kanko Kaikan in Kanazawa city] / [Japan Society for Aeronautical and Space Sciences. Kohtaro Matsumoto [ed.-in-chief]},
  journal   = {Proceedings of the Twenty-Fifth International Symposium on Space Technology and Science (Selected papers) : Kanazawa, [June 4 through June 11, 2006, at Kanazawa-shi Kanko Kaikan in Kanazawa city] / [Japan Society for Aeronautical and Space Sciences. Kohtaro Matsumoto [ed.-in-chief]},
  publisher = {JSASS},
  address   = {Tokyo},
  isbn      = {4-99005-002-9},
  pages     = {569 -- 574},
  year      = {2006},
  language  = {en}
}
@article{DachwaldCarnelliVasile2009,
  author    = {Dachwald, Bernd and Carnelli, Ian and Vasile, Massimiliano},
  title     = {Evolutionary Neurocontrol: A Novel Method for Low-Thrust Gravity-Assist Trajectory Optimization / Carnelli, Ian ; Dachwald, Bernd ; Vasile, Massimiliano},
  series = {Journal of guidance control and dynamics. 32 (2009), H. 2},
  journal   = {Journal of guidance control and dynamics. 32 (2009), H. 2},
  publisher = {AIAA},
  address   = {Reston, Va.},
  isbn      = {0731-5090},
  pages     = {616 -- 625},
  year      = {2009},
  language  = {en}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Evolutionary Neurocontrol: A Smart Method for Global Optimization of Low-Thrust Trajectories},
  series = {22nd AIAA Applied Aerodynamics Conference and Exhibit - AIAA/AAS Astrodynamics Specialist Conference and Exhibit - AIAA Guidance, Navigation, and Control Conference and Exhibit - AIAA Modeling and Simulation Technologies Conference and Exhibit - AIAA Atmospheric Flight Mechanics Conference and Exhibit : 16 - 19 August 2004, Providence, Rhode Island / American Institute of Aeronautics and Astronautics. - (AIAA meeting papers on disc ; 2004,14-15)},
  journal   = {22nd AIAA Applied Aerodynamics Conference and Exhibit - AIAA/AAS Astrodynamics Specialist Conference and Exhibit - AIAA Guidance, Navigation, and Control Conference and Exhibit - AIAA Modeling and Simulation Technologies Conference and Exhibit - AIAA Atmospheric Flight Mechanics Conference and Exhibit : 16 - 19 August 2004, Providence, Rhode Island / American Institute of Aeronautics and Astronautics. - (AIAA meeting papers on disc ; 2004,14-15)},
  publisher = {American Inst. of Aeronautics and Astronautics},
  address   = {Reston, Va.},
  pages     = {2 CD-ROMs},
  year      = {2004},
  language  = {en}
}
@article{SchindlerBialonskiHorstmannetal.2008,
  author    = {Schindler, Kaspar A. and Bialonski, Stephan and Horstmann, Marie-Therese and Elger, Christian E. and Lehnertz, Klaus},
  title     = {Evolving functional network properties and synchronizability during human epileptic seizures},
  series = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  volume    = {18},
  journal   = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  number    = {3},
  issn      = {1089-7682},
  doi       = {10.1063/1.2966112},
  pages     = {033119},
  year      = {2008},
  language  = {en}
}
@article{LehnertzAnsmannBialonskietal.2014,
  author    = {Lehnertz, Klaus and Ansmann, Gerrit and Bialonski, Stephan and Dickten, Henning and Geier, Christian and Porz, Stephan},
  title     = {Evolving networks in the human epileptic brain},
  series = {Physica D: Nonlinear Phenomena},
  volume    = {267},
  journal   = {Physica D: Nonlinear Phenomena},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-2789},
  doi       = {10.1016/j.physd.2013.06.009},
  pages     = {7 -- 15},
  year      = {2014},
  abstract  = {Network theory provides novel concepts that promise an improved characterization of interacting dynamical systems. Within this framework, evolving networks can be considered as being composed of nodes, representing systems, and of time-varying edges, representing interactions between these systems. This approach is highly attractive to further our understanding of the physiological and pathophysiological dynamics in human brain networks. Indeed, there is growing evidence that the epileptic process can be regarded as a large-scale network phenomenon. We here review methodologies for inferring networks from empirical time series and for a characterization of these evolving networks. We summarize recent findings derived from studies that investigate human epileptic brain networks evolving on timescales ranging from few seconds to weeks. We point to possible pitfalls and open issues, and discuss future perspectives.},
  language  = {en}
}
@article{PoettgenEdererAltherretal.2015,
  author    = {P{\"o}ttgen, Philipp and Ederer, Thorsten and Altherr, Lena and Lorenz, Ulf and Pelz, Peter F.},
  title     = {Examination and optimization of a heating circuit for energy-efficient buildings},
  series = {Energy Technology},
  volume    = {4},
  journal   = {Energy Technology},
  number    = {1},
  publisher = {WILEY-VCH Verlag},
  address   = {Weinheim},
  isbn      = {2194-4296},
  doi       = {10.1002/ente.201500252},
  pages     = {136 -- 144},
  year      = {2015},
  abstract  = {The conference center darmstadtium in Darmstadt is a prominent example of energy efficient buildings. Its heating system consists of different source and consumer circuits connected by a Zortstr{\"o}m reservoir. Our goal was to reduce the energy costs of the system as much as possible. Therefore, we analyzed its supply circuits. The first step towards optimization is a complete examination of the system: 1) Compilation of an object list for the system, 2) collection of the characteristic curves of the components, and 3) measurement of the load profiles of the heat and volume-flow demand. Instead of modifying the system manually and testing the solution by simulation, the second step was the creation of a global optimization program. The objective was to minimize the total energy costs for one year. We compare two different topologies and show opportunities for significant savings.},
  language  = {en}
}
@article{EckertRudolphGuoetal.2018,
  author    = {Eckert, Alexander and Rudolph, Tobias and Guo, Jiaqi and Mang, Thomas and Walther, Andreas},
  title     = {Exceptionally Ductile and Tough Biomimetic Artificial Nacre with Gas Barrier Function},
  series = {Advanced Materials},
  volume    = {30},
  journal   = {Advanced Materials},
  number    = {32},
  publisher = {Wiley-VCH},
  doi       = {10.1002/adma.201802477},
  pages     = {Article number 1802477},
  year      = {2018},
  abstract  = {Synthetic mimics of natural high-performance structural materials have shown great and partly unforeseen opportunities for the design of multifunctional materials. For nacre-mimetic nanocomposites, it has remained extraordinarily challenging to make ductile materials with high stretchability at high fractions of reinforcements, which is however of crucial importance for flexible barrier materials. Here, highly ductile and tough nacre-mimetic nanocomposites are presented, by implementing weak, but many hydrogen bonds in a ternary nacre-mimetic system consisting of two polymers (poly(vinyl amine) and poly(vinyl alcohol)) and natural nanoclay (montmorillonite) to provide efficient energy dissipation and slippage at high nanoclay content (50 wt\%). Tailored interactions enable exceptional combinations of ductility (close to 50\% strain) and toughness (up to 27.5 MJ m⁻³). Extensive stress whitening, a clear sign of high internal dynamics at high internal cohesion, can be observed during mechanical deformation, and the materials can be folded like paper into origami planes without fracture. Overall, the new levels of ductility and toughness are unprecedented in highly reinforced bioinspired nanocomposites and are of critical importance to future applications, e.g., as barrier materials needed for encapsulation and as a printing substrate for flexible organic electronics.},
  language  = {en}
}
@article{GrotendorstScottAubertFreconetal.2004,
  author    = {Grotendorst, Johannes and Scott, Tony C. and Aubert-Fr{\´e}con, Monique and Andrae, D.},
  title     = {Exchange Energy for Two-Active-Electron Diatomic Systems within the Surface Integral Method / Scott,T. C .; Aubert-Fr{\´e}con, M. ; Andrae, D. ; Grotendorst, J. ; Morgan III, J. D. ; Glasser, M. L.},
  series = {Applicable Algebra in Engineering, Communication and Computing. 15 (2004), H. 2},
  journal   = {Applicable Algebra in Engineering, Communication and Computing. 15 (2004), H. 2},
  isbn      = {0938-1279},
  pages     = {101 -- 128},
  year      = {2004},
  language  = {en}
}
@article{OlaruKowalskiSethietal.2012,
  author    = {Olaru, Alexandra Maria and Kowalski, Julia and Sethi, Vaishali and Bl{\"u}mich, Bernhard},
  title     = {Exchange relaxometry of flow at small P{\´e}clet numbers in a glass bead pack},
  series = {Journal of Magnetic Resonance (JMR)},
  volume    = {220},
  journal   = {Journal of Magnetic Resonance (JMR)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1096-0856},
  doi       = {10.1016/j.jmr.2012.04.015},
  pages     = {32 -- 44},
  year      = {2012},
  abstract  = {In this paper we consider low P{\´e}clet number flow in bead packs. A series of relaxation exchange experiments has been conducted and evaluated by ILT analysis. In the resulting correlation maps, we observed a collapse of the signal and a translation towards smaller relaxation times with increasing flow rates, as well as a signal tilt with respect to the diagonal. In the discussion of the phenomena we present a mathematical theory for relaxation exchange experiments that considers both diffusive and advective transport. We perform simulations based on this theory and discuss them with respect to the conducted experiments.},
  language  = {en}
}
@article{SiegertMcLeishBaumannetal.2005,
  author    = {Siegert, Petra and McLeish, Michael J. and Baumann, Martin and Iding, Hans and Kneen, Malea M. and Kenyon, George L. and Pohl, Martina},
  title     = {Exchanging the substrate specificities of pyruvate decarboxylase from Zymomonas mobilis and benzoylformate decarboxylase from Pseudomonas putida},
  series = {Protein engineering, design, and selection : peds},
  volume    = {Vol. 18},
  journal   = {Protein engineering, design, and selection : peds},
  number    = {Iss. 7},
  issn      = {1460-213X (E-Journal); 1741-0134 (E-Journal); 0269-2139 (Print); 1741-0126 (Print)},
  pages     = {345 -- 357},
  year      = {2005},
  language  = {en}
}
@article{SchaeferUebbingvonderOstenetal.1996,
  author    = {Sch{\"a}fer, Horst and Uebbing, H. and von der Osten, W. and Hommel, D. (u.a.)},
  title     = {Exciton and Phonon Quantization in Ultrathin Epitaxial Layers of ZnSe},
  series = {23rd International Conference on the Physics of Semiconductors : Berlin, Germany, July 21 - 26, 1996 / ed.: Matthias Scheffler ...},
  journal   = {23rd International Conference on the Physics of Semiconductors : Berlin, Germany, July 21 - 26, 1996 / ed.: Matthias Scheffler ...},
  publisher = {World Scientific},
  address   = {Singapore [u.a.]},
  isbn      = {981-02-2777-9},
  pages     = {365 -- 368},
  year      = {1996},
  language  = {en}
}
@article{Hillen1982,
  author    = {Hillen, Walter},
  title     = {Exclusive proton-antiproton production in two photon collisions . TASSO Collaboration},
  series = {Physics Letters B. 108 (1982), H. 1},
  journal   = {Physics Letters B. 108 (1982), H. 1},
  isbn      = {0370-2693},
  pages     = {67 -- 70},
  year      = {1982},
  language  = {en}
}
@article{HanssenNickelDrexeletal.2011,
  author    = {Hanssen, H. and Nickel, T. and Drexel, V. and Hertel, G. and Emslander, I. and Sisic, Z. and Lorang, D. and Schuster, T. and Kotliar, Konstantin and Pressler, A. and Schmidt-Trucks{\"a}ss, A. and Weis, M. and Halle, M.},
  title     = {Exercise-induced alterations of retinal vessel diameters and cardiovascular risk reduction in obesity},
  series = {Atherosclerosis},
  volume    = {216},
  journal   = {Atherosclerosis},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0021-9150},
  pages     = {433 -- 439},
  year      = {2011},
  language  = {en}
}
@article{AlbrachtArampatzis2013,
  author    = {Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Exercise-induced changes in triceps surae tendon stiffness and muscle strength affect running economy in humans},
  series = {European Journal of Applied Physiology},
  volume    = {113},
  journal   = {European Journal of Applied Physiology},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1439-6327},
  doi       = {10.1007/s00421-012-2585-4},
  pages     = {1605 -- 1615},
  year      = {2013},
  language  = {en}
}
@article{Fabo1998,
  author    = {Fabo, Sabine},
  title     = {Exhibition review: Documenta X and its media concept},
  series = {Leonardo},
  volume    = {31},
  journal   = {Leonardo},
  number    = {4},
  isbn      = {0024-094x},
  pages     = {330},
  year      = {1998},
  language  = {en}
}
@article{SteuerDankertGilmartinMulleretal.2019,
  author    = {Steuer-Dankert, Linda and Gilmartin, Shannon K. and Muller, Carol B. and Dungs, Carolin and Sheppard, Sheri and Leicht-Scholten, Carmen},
  title     = {Expanding engineering limits : a concept for socially responsible education of engineers},
  series = {The international journal of engineering education},
  volume    = {35},
  journal   = {The international journal of engineering education},
  number    = {2},
  isbn      = {0949-149X},
  pages     = {658 -- 673},
  year      = {2019},
  language  = {en}
}
@article{FontiEilmannGarciaGonzalezetal.2009,
  author    = {Fonti, Patrick and Eilmann, Britta and Garc{\´i}a-Gonz{\´a}lez, Ignacio and von Arx, Georg},
  title     = {Expeditious building of ring-porous earlywood vessel chronologies without loosing signal information},
  series = {Trees : structure and function},
  volume    = {23},
  journal   = {Trees : structure and function},
  number    = {3},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0931-1890 (Print)},
  doi       = {10.1007/s00468-008-0310-z},
  pages     = {665 -- 671},
  year      = {2009},
  language  = {en}
}
@article{NoureddineBitzLaddetal.2015,
  author    = {Noureddine, Yacine and Bitz, Andreas and Ladd, Mark E. and Th{\"u}rling, Markus and Ladd, Susanne C. and Schaefers, Gregor and Kraff, Oliver},
  title     = {Experience with magnetic resonance imaging of human subjects with passive implants and tattoos at 7 T: a retrospective study},
  series = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  volume    = {28},
  journal   = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1352-8661},
  doi       = {10.1007/s10334-015-0499-y},
  pages     = {577 -- 590},
  year      = {2015},
  language  = {en}
}
@article{BienerSasse1988,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Experience with new techniques in slurry cutoff wall construction},
  series = {ISWA 88, proceedings of the 5th International Solid Wastes Conference : September 11 - 16th, 1988, Copenhagen, Denmark / ed. by Lizzi Andersen ... - Vol. 1 : Oral presentations},
  journal   = {ISWA 88, proceedings of the 5th International Solid Wastes Conference : September 11 - 16th, 1988, Copenhagen, Denmark / ed. by Lizzi Andersen ... - Vol. 1 : Oral presentations},
  publisher = {Acad. Press},
  address   = {London [u.a.]},
  isbn      = {0-12-058451-4},
  pages     = {41 -- 46},
  year      = {1988},
  language  = {en}
}
@article{KleinesZiemonsZwoll1998,
  author    = {Kleines, H. and Ziemons, Karl and Zwoll, K.},
  title     = {Experiences with ATM in a multivendor pilot system at Forschungszentrum J{\"u}lich},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {45},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {4},
  issn      = {0018-9499},
  pages     = {1867 -- 1871},
  year      = {1998},
  abstract  = {The ATM technology for high speed serial transmission provides a new quality of communication by introducing novel features in a LAN environment, especially support of real time communication, of both LAN and WAN communication and of multimedia streams. In order to evaluate ATM for future DAQ systems and remote control systems as well as for a high speed picture archiving and communications system for medical images, Forschungszentrum Julich has build up a pilot system for the evaluation of ATM and standard low cost multimedia systems. It is a heterogeneous multivendor system containing a variety of switches and desktop solutions, employing different protocol options of ATM. The tests conducted in the pilot system revealed major difficulties regarding stability, interoperability and performance. The paper presents motivations, layout and results of the pilot system. Discussion of results concentrates on performance issues relevant for realistic applications, e.g., connection to a RAID system via NFS over ATM},
  language  = {en}
}
@article{StaatSponagelNguyen2010,
  author    = {Staat, Manfred and Sponagel, Stefan and Nguyen, Nhu Huynh},
  title     = {Experiment and material model for soft tissue materials},
  series = {Constitutive models for rubber VI : proceedings of the sixth European Conference on Constitutive Models for Rubber, Dresden, Germany, 7 - 10 September 2009 / eds. Gert Heinrich ...},
  journal   = {Constitutive models for rubber VI : proceedings of the sixth European Conference on Constitutive Models for Rubber, Dresden, Germany, 7 - 10 September 2009 / eds. Gert Heinrich ...},
  publisher = {CRC Press},
  address   = {Boca Raton [u.a.]},
  isbn      = {978-0-415-56327-7},
  pages     = {465 -- 470},
  year      = {2010},
  language  = {en}
}
@article{VelrajSeenirajHafneretal.1997,
  author    = {Velraj, R. and Seeniraj, R. V. and Hafner, B. and Faber, Christian and Schwarzer, Klemens},
  title     = {Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit},
  series = {Solar energy. 60 (1997), H. 5},
  journal   = {Solar energy. 60 (1997), H. 5},
  isbn      = {0038-092X},
  pages     = {281 -- 290},
  year      = {1997},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations},
  series = {physica status solidi (a): applications and materials science},
  volume    = {215},
  journal   = {physica status solidi (a): applications and materials science},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201700920},
  pages     = {Artikel 1700920},
  year      = {2018},
  abstract  = {In this work, a cell-based biosensor to evaluate the sterilization efficacy of hydrogen peroxide vapor sterilization processes is characterized. The transducer of the biosensor is based on interdigitated gold electrodes fabricated on an inert glass substrate. Impedance spectroscopy is applied to evaluate the sensor behavior and the alteration of test microorganisms due to the sterilization process. These alterations are related to changes in relative permittivity and electrical conductivity of the bacterial spores. Sensor measurements are conducted with and without bacterial spores (Bacillus atrophaeus), as well as after an industrial sterilization protocol. Equivalent two-dimensional numerical models based on finite element method of the periodic finger structures of the interdigitated gold electrodes are designed and validated using COMSOL® Multiphysics software by the application of known dielectric properties. The validated models are used to compute the electrical properties at different sensor states (blank, loaded with spores, and after sterilization). As a final result, we will derive and tabulate the frequency-dependent electrical parameters of the spore layer using a novel model that combines experimental data with numerical optimization techniques.},
  language  = {en}
}
@article{HoffschmidtPitzPaalBoehmer1997,
  author    = {Hoffschmidt, Bernhard and Pitz-Paal, R. and B{\"o}hmer, M.},
  title     = {Experimental and numerical evaluation of the performance and flow stability of different types of open volumetric absorbers under non-homogeneous irradiation / R. Pitz-Pahl ; B. Hofschmidt ; M. B{\"o}hmer ...},
  series = {Solar energy. 60 (1997), H. 3-4},
  journal   = {Solar energy. 60 (1997), H. 3-4},
  isbn      = {0038-092X},
  pages     = {135 -- 150},
  year      = {1997},
  language  = {en}
}
@article{HajAyedKustererFunkeetal.2015,
  author    = {Haj Ayed, A. and Kusterer, K. and Funke, Harald and Keinz, Jan and Striegan, Constantin and Bohn, D.},
  title     = {Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine},
  series = {Propulsion and power research},
  volume    = {Vol. 4},
  journal   = {Propulsion and power research},
  number    = {Iss. 3},
  issn      = {2212-540X},
  doi       = {10.1016/j.jppr.2015.07.005},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{FunkeDickhoffKeinzetal.2014,
  author    = {Funke, Harald and Dickhoff, J. and Keinz, Jan and Anis, H. A. and Parente, A. and Hendrick, P.},
  title     = {Experimental and numerical study of the micromix combustion principle applied for hydrogen and hydrogen-rich syngas as fuel with increased energy density for industrial gas turbine applications},
  series = {Energy procedia},
  journal   = {Energy procedia},
  number    = {61},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal)},
  doi       = {10.1016/j.egypro.2014.12.201},
  pages     = {1736 -- 1739},
  year      = {2014},
  abstract  = {The Dry Low NOx (DLN) Micromix combustion principle with increased energy density is adapted for the industrial gas turbine APU GTCP 36-300 using hydrogen and hydrogen-rich syngas with a composition of 90\%-Vol. hydrogen (H₂) and 10\%-Vol. carbon-monoxide (CO). Experimental and numerical studies of several combustor geometries for hydrogen and syngas show the successful advance of the DLN Micromix combustion from pure hydrogen to hydrogen-rich syngas. The impact of the different fuel properties on the combustion principle and aerodynamic flame stabilization design laws, flow field, flame structure and emission characteristics is investigated by numerical analysis using a hybrid Eddy Break Up combustion model and validated against experimental results.},
  language  = {en}
}
@article{FunkeKeinzKustereretal.2016,
  author    = {Funke, Harald and Keinz, Jan and Kusterer, Karsten and Ayed, Anis Haj and Kazari, Masahide and Kitajima, Junichi and Horikawa, Atsushi and Okada, Kunio},
  title     = {Experimental and Numerical Study on Optimizing the Dry Low NOₓ Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications},
  series = {Journal of Thermal Science and Engineering Applications},
  volume    = {9},
  journal   = {Journal of Thermal Science and Engineering Applications},
  number    = {2},
  publisher = {ASME},
  address   = {New York, NY},
  issn      = {1948-5093},
  doi       = {10.1115/1.4034849},
  pages     = {021001 -- 021001-10},
  year      = {2016},
  abstract  = {Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel for future low-emission power generation. Due to the difference in the physical properties of hydrogen compared to other fuels such as natural gas, well-established gas turbine combustion systems cannot be directly applied to dry low NOₓ (DLN) hydrogen combustion. The DLN micromix combustion of hydrogen has been under development for many years, since it has the promise to significantly reduce NOₓ emissions. This combustion principle for air-breathing engines is based on crossflow mixing of air and gaseous hydrogen. Air and hydrogen react in multiple miniaturized diffusion-type flames with an inherent safety against flashback and with low NOₓ emissions due to a very short residence time of the reactants in the flame region. The paper presents an advanced DLN micromix hydrogen application. The experimental and numerical study shows a combustor configuration with a significantly reduced number of enlarged fuel injectors with high-thermal power output at constant energy density. Larger fuel injectors reduce manufacturing costs, are more robust and less sensitive to fuel contamination and blockage in industrial environments. The experimental and numerical results confirm the successful application of high-energy injectors, while the DLN micromix characteristics of the design point, under part-load conditions, and under off-design operation are maintained. Atmospheric test rig data on NOₓ emissions, optical flame-structure, and combustor material temperatures are compared to numerical simulations and show good agreement. The impact of the applied scaling and design laws on the miniaturized micromix flamelets is particularly investigated numerically for the resulting flow field, the flame-structure, and NOₓ formation.},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{SponagelBaroudFalketal.2004,
  author    = {Sponagel, Stefan and Baroud, G. and Falk, R. and Crookshank, M.},
  title     = {Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration. G. Baroud, R. Falk, M. Crookshank, S. Sponagel, T. Steffen},
  series = {Journal of Biomechanics. 37 (2004), H. 2},
  journal   = {Journal of Biomechanics. 37 (2004), H. 2},
  isbn      = {0021-9290},
  pages     = {189 -- 196},
  year      = {2004},
  language  = {en}
}
@article{FunkeBoernerKrebsetal.2011,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Krebs, W. and Wolf, E.},
  title     = {Experimental Characterization of Low NOx Micromix Prototype Combustors for Industrial Gas Turbine Applications},
  series = {ASME Turbo Expo 2011 ; Vancouver, Canada, June 6-10, 2011},
  journal   = {ASME Turbo Expo 2011 ; Vancouver, Canada, June 6-10, 2011},
  year      = {2011},
  language  = {en}
}
@article{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Experimental investigation of the face stability of shallow tunnels in sand},
  series = {Acta Geotechnica},
  volume    = {5},
  journal   = {Acta Geotechnica},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1125},
  doi       = {10.1007/s11440-010-0110-7},
  pages     = {43 -- 62},
  year      = {2010},
  abstract  = {Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and L{\´e}ca/Dormieux showed the best agreement to the measurements.},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{BohnFunke2003,
  author    = {Bohn, Dieter and Funke, Harald},
  title     = {Experimental investigations into the nonuniform flow in a 4-stage turbine with special focus on the flow equalization in the first turbine stage},
  series = {ASME TURBO EXPO, Proceedings of the ASME Turbo Expo, 2003},
  journal   = {ASME TURBO EXPO, Proceedings of the ASME Turbo Expo, 2003},
  isbn      = {0-7918-3689-4},
  pages     = {281 -- 289},
  year      = {2003},
  language  = {en}
}