@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{ReckerBosschaertsWagemakersetal.2010,
  author    = {Recker, Elmar and Bosschaerts, Walter and Wagemakers, Rolf and Hendrick, Patrick and Funke, Harald and B{\"o}rner, Sebastian},
  title     = {Experimental study of a round jet in cross-flow at low momentum ratio},
  series = {15th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal, 05-08 July, 2010 - 1},
  journal   = {15th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal, 05-08 July, 2010 - 1},
  pages     = {1 -- 13},
  year      = {2010},
  language  = {en}
}
@article{MuellerVeggianDidelezLiederetal.1980,
  author    = {M{\"u}ller-Veggian, Mattea and Didelez, J.-P. and Lieder, R. M. and Beuscher, H.},
  title     = {Experimental study of excitation functions and isomer ratios for ²¹¹,²¹² Po},
  series = {Nuclear physics / A, Nuclear and hadronic physics. 341 (1980), H. 3},
  journal   = {Nuclear physics / A, Nuclear and hadronic physics. 341 (1980), H. 3},
  isbn      = {0375-9474},
  pages     = {421 -- 439},
  year      = {1980},
  language  = {en}
}
@article{HavermannSalveTinetal.1994,
  author    = {Havermann, Marc and Salve, M. de and Tin, G. del and Panella, B.},
  title     = {Experimental Study of the Temperature Field along a Density Lock / Salve, M. de ; Tin, G. del ; Panella, B. ; Sansoldo, D. ; Havermann, M.},
  series = {Proceedings : International Conference on New Trends in Nuclear System Thermohydraulics, May 30th - June 2nd, 1994, Pisa / organized by Dipartimento di Costruzioni Meccaniche e Nucleari ... . Ed. by Francesco Oriolo},
  journal   = {Proceedings : International Conference on New Trends in Nuclear System Thermohydraulics, May 30th - June 2nd, 1994, Pisa / organized by Dipartimento di Costruzioni Meccaniche e Nucleari ... . Ed. by Francesco Oriolo},
  publisher = {-},
  address   = {Pisa},
  pages     = {623 -- 630},
  year      = {1994},
  language  = {en}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{AltherrEdererLorenzetal.2014,
  author    = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp},
  title     = {Experimental validation of an enhanced system synthesis approach},
  series = {Operations Research Proceedings 2014},
  journal   = {Operations Research Proceedings 2014},
  editor    = {L{\"u}bbecke, Marco and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Peis, Britta and Walther, Grit},
  publisher = {Springer},
  address   = {Basel},
  isbn      = {978-3-319-28695-2},
  doi       = {10.1007/978-3-319-28697-6_1},
  pages     = {6},
  year      = {2014},
  abstract  = {Planning the layout and operation of a technical system is a common task for an engineer. Typically, the workflow is divided into consecutive stages: First, the engineer designs the layout of the system, with the help of his experience or of heuristic methods. Secondly, he finds a control strategy which is often optimized by simulation. This usually results in a good operating of an unquestioned sys- tem topology. In contrast, we apply Operations Research (OR) methods to find a cost-optimal solution for both stages simultaneously via mixed integer program- ming (MILP). Technical Operations Research (TOR) allows one to find a provable global optimal solution within the model formulation. However, the modeling error due to the abstraction of physical reality remains unknown. We address this ubiq- uitous problem of OR methods by comparing our computational results with mea- surements in a test rig. For a practical test case we compute a topology and control strategy via MILP and verify that the objectives are met up to a deviation of 8.7\%.},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {87},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {12},
  issn      = {0005-9021},
  pages     = {1201 -- 1204},
  year      = {1983},
  language  = {en}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{Siepmann1999,
  author    = {Siepmann, Thomas},
  title     = {Exploitation Plan of the TELEflow Project},
  address   = {Brussels},
  year      = {1999},
  language  = {en}
}
@article{GoeddekeStrzodkaMohdYusofetal.2007,
  author    = {G{\"o}ddeke, Dominik and Strzodka, Robert and Mohd-Yusof, Jamaludin and McCormick, Patrick and Buijssen, Sven H.M. and Grajewski, Matthias and Turek, Stefan},
  title     = {Exploring weak scalability for FEM calculations on a GPU-enhanced cluster},
  series = {Parallel Computing},
  volume    = {33},
  journal   = {Parallel Computing},
  number    = {10-11},
  issn      = {0167-8191},
  doi       = {10.1016/j.parco.2007.09.002},
  pages     = {685 -- 699},
  year      = {2007},
  language  = {en}
}
@article{ReinhardtBitzElOuardietal.2007,
  author    = {Reinhardt, T. and Bitz, Andreas and El Ouardi, A. and Streckert, J. and Sommer, A. and Lerchl, A. and Hansen, V.},
  title     = {Exposure set-ups for in vivo experiments using radial waveguides},
  series = {Radiation Protection Dosimetry},
  volume    = {124},
  journal   = {Radiation Protection Dosimetry},
  number    = {1},
  issn      = {1742-3406},
  doi       = {10.1093/rpd/ncm370},
  pages     = {21 -- 26},
  year      = {2007},
  language  = {en}
}
@article{SchlamannVoigtMaderwaldetal.2010,
  author    = {Schlamann, Marc and Voigt, Melanie A. and Maderwald, Stefan and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Ladd, Mark E. and Forsting, Michael and Wilhelm, Hans},
  title     = {Exposure to high-field MRI does not affect cognitive function},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {31},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {5},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22065},
  pages     = {1061 -- 1066},
  year      = {2010},
  abstract  = {Purpose To assess potential cognitive deficits under the influence of static magnetic fields at various field strengths some studies already exist. These studies were not focused on attention as the most vulnerable cognitive function. Additionally, mostly no magnetic resonance imaging (MRI) sequences were performed. Materials and Methods In all, 25 right-handed men were enrolled in this study. All subjects underwent one MRI examination of 63 minutes at 1.5 T and one at 7 T within an interval of 10 to 30 days. The order of the examinations was randomized. Subjects were referred to six standardized neuropsychological tests strictly focused on attention immediately before and after each MRI examination. Differences in neuropsychological variables between the timepoints before and after each MRI examination were assessed and P-values were calculated Results Only six subtests revealed significant differences between pre- and post-MRI. In these tests the subjects achieved better results in post-MRI testing than in pre-MRI testing (P = 0.013-0.032). The other tests revealed no significant results. Conclusion The improvement in post-MRI testing is only explicable as a result of learning effects. MRI examinations, even in ultrahigh-field scanners, do not seem to have any persisting influence on the attention networks of human cognition immediately after exposure.},
  language  = {en}
}
@article{FerreinFritzLakemeyer2003,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Extending DTGOLOG with Options / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  journal   = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  pages     = {1391 -- 1393},
  year      = {2003},
  language  = {en}
}
@article{SchrothSchoeningLuethetal.2001,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Weißbecker, B. and Hummel, Hans E. and Sch{\"u}tz, S.},
  title     = {Extending the capabilities of an antenna/chip biosensor by employing various insect species},
  series = {Sensors and Actuators B. 78 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 78 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {1 -- 5},
  year      = {2001},
  language  = {en}
}
@article{SchrothSchoeningLuethetal.2000,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Weißbecker, B. and Hummel, Hans E. and Sch{\"u}tz, S.},
  title     = {Extending the capabilities of an antenna/chip biosensor by employing various insect species},
  series = {Proceedings : Copenhagen, Denmark, 27 - 30 August 2000 / [ed.: R. de Reus ...]},
  journal   = {Proceedings : Copenhagen, Denmark, 27 - 30 August 2000 / [ed.: R. de Reus ...]},
  publisher = {MIC, Mikroelektronik Centret},
  address   = {Lyngby, Denmark},
  isbn      = {87-89935-50-0},
  pages     = {27 -- 30},
  year      = {2000},
  language  = {en}
}
@article{PrumeMuraltCalameetal.2007,
  author    = {Prume, Klaus and Muralt, Paul and Calame, Florian and Schmitz-Kempen, Thorsten},
  title     = {Extensive electromechanical characterization of PZT thin films for MEMS applications by electrical and mechanical excitation signals / Prume, Klaus ; Muralt, Paul ; Calame, Florian ; Schmitz-Kempen, Thorsten ; Tiedke, Stephan},
  series = {Journal of Electroceramics. 19 (2007), H. 4},
  journal   = {Journal of Electroceramics. 19 (2007), H. 4},
  isbn      = {1385-3449},
  pages     = {407 -- 411},
  year      = {2007},
  language  = {en}
}
@article{RibitschHeumannKarletal.2012,
  author    = {Ribitsch, D. and Heumann, S. and Karl, W. and Gerlach, J. and Leber, R. and Birner-Gruenberger, R. and Gruber, K. and Eiteljoerg, I. and Remler, P. and Siegert, Petra and Lange, J. and Maurer, Karl-Heinz and Berg, G. and Guebitz, G. M. and Schwab, H.},
  title     = {Extracellular serine proteases from Stenotrophomonas maltophilia: Screening, isolation and heterologous expression in E. coli},
  series = {Journal of biotechnology},
  volume    = {157},
  journal   = {Journal of biotechnology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2011.09.025},
  pages     = {140 -- 147},
  year      = {2012},
  abstract  = {A large strain collection comprising antagonistic bacteria was screened for novel detergent proteases. Several strains displayed protease activity on agar plates containing skim milk but were inactive in liquid media. Encapsulation of cells in alginate beads induced protease production. Stenotrophomonas maltophilia emerged as best performer under washing conditions. For identification of wash-active proteases, four extracellular serine proteases called StmPr1, StmPr2, StmPr3 and StmPr4 were cloned. StmPr2 and StmPr4 were sufficiently overexpressed in E. coli. Expression of StmPr1 and StmPr3 resulted in unprocessed, insoluble protein. Truncation of most of the C-terminal domain which has been identified by enzyme modeling succeeded in expression of soluble, active StmPr1 but failed in case of StmPr3. From laundry application tests StmPr2 turned out to be a highly wash-active protease at 45 °C. Specific activity of StmPr2 determined with suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide as the substrate was 17 ± 2 U/mg. In addition we determined the kinetic parameters and cleavage preferences of protease StmPr2.},
  language  = {en}
}
@article{MulhernBialonskiKantz2015,
  author    = {Mulhern, Colm and Bialonski, Stephan and Kantz, Holger},
  title     = {Extreme events due to localization of energy},
  series = {Physical Review E},
  volume    = {91},
  journal   = {Physical Review E},
  number    = {1},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.91.012918},
  pages     = {012918},
  year      = {2015},
  language  = {en}
}
@article{Bung2021,
  author    = {Bung, Daniel Bernhard},
  title     = {Extreme flooding in Western Germany: some thoughts on hazards, return periods and risk},
  series = {Hydrolink},
  journal   = {Hydrolink},
  number    = {4},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  pages     = {108 -- 113},
  year      = {2021},
  abstract  = {The low-pressure system Bernd involved extreme rainfalls in the Western part of Germany in July 2021, resulting in major floods, severe damages and a tremendous number of casualties. Such extreme events are rare and full flood protection can never be ensured with reasonable financial means. But still, this event must be starting point to reconsider current design concepts. This article aims at sharing some thoughts on potential hazards, the selection of return periods and remaining risk with the focus on Germany.},
  language  = {en}
}
@article{FoersterAdamMikulicsetal.2002,
  author    = {F{\"o}rster, Arnold and Adam, R. and Mikulics, M. and Schelten, J.},
  title     = {Fabrication and subpicosecond optical response of low-temperature-grown GaAs freestanding photoconductive devices. Adam, R.; Mikulics, M.; Forster, A.; Schelten, J.; Siegel, M.; Kordos, P.; Zheng, X.; Wu, S.; Sobolewski, R.},
  series = {Applied Physics Letters. 81 (2002), H. 18},
  journal   = {Applied Physics Letters. 81 (2002), H. 18},
  isbn      = {1077-3118},
  pages     = {3485 -- 3487},
  year      = {2002},
  language  = {en}
}
@article{TakenagaSchneiderErbayetal.2015,
  author    = {Takenaga, Shoko and Schneider, Benno and Erbay, E. and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201532053},
  pages     = {1347 -- 1352},
  year      = {2015},
  abstract  = {A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.},
  language  = {en}
}
@article{WeberBhujuChandraetal.2004,
  author    = {Weber, Hans-Joachim and Bhuju, S. and Chandra, S. and Mo, X.},
  title     = {Fabrication of biodegradable nanofibers for tubular scaffolds in regenerative medicine / Weber, H.-J. ; Bhuju, S. ; Chandra, S. ; Mo, X.},
  series = {Biomedizinische Technik. 49 (2004), H. Erg.-Bd. 2, Teil 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. Erg.-Bd. 2, Teil 2},
  pages     = {1016 -- 1017},
  year      = {2004},
  language  = {en}
}
@article{FoersterKicinCambeletal.2002,
  author    = {F{\"o}rster, Arnold and Kicin, S and Cambel, V. and Kuliffayova, M.},
  title     = {Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer. Kicin, S.; Cambel, V.; Kuliffayova, M.; Gregusova, D.; Kovacova, E.; Novak, J.; Kostic, I.; Forster, A.},
  series = {Journal of Applied Physics. 91 (2002), H. 2},
  journal   = {Journal of Applied Physics. 91 (2002), H. 2},
  isbn      = {1089-7550},
  pages     = {878 -- 880},
  year      = {2002},
  language  = {en}
}
@article{MuckWangJacobsetal.2004,
  author    = {Muck, A. and Wang, J. and Jacobs, M. and Chen, G. and Chatrathi, M. P. and Jurka, V. and Vyborny, Z. and Spillmann, S. D. and Sridharan, G. and Sch{\"o}ning, Michael Josef},
  title     = {Fabrication of poly(methyl methacrylate) microfluidic chips by atmospheric molding},
  series = {Analytical Chemistry. 76 (2004), H. 8},
  journal   = {Analytical Chemistry. 76 (2004), H. 8},
  isbn      = {0003-2700},
  pages     = {2290 -- 2297},
  year      = {2004},
  language  = {en}
}
@article{YoshinobuSchoeningFingeretal.2004,
  author    = {Yoshinobu, T. and Sch{\"o}ning, Michael Josef and Finger, F. and Moritz, W. and Iwasaki, H.},
  title     = {Fabrication of thin-film LAPS with amorphous silicon},
  series = {Sensors. 4 (2004), H. 10},
  journal   = {Sensors. 4 (2004), H. 10},
  isbn      = {1424-8220},
  pages     = {163 -- 169},
  year      = {2004},
  language  = {en}
}
@article{SchiffelsBaumannSelmer2011,
  author    = {Schiffels, Johannes and Baumann, Marcus and Selmer, Thorsten},
  title     = {Facile analysis of short-chain fatty acids as 4-nitrophenyl esters in complex anaerobic fermentation samples by high performance liquid chromatography},
  series = {Journal of Chromatography A. 1218 (2011), H. 34},
  journal   = {Journal of Chromatography A. 1218 (2011), H. 34},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0021-9673},
  pages     = {5848 -- 5851},
  year      = {2011},
  language  = {en}
}
@article{WendlandtKochBritzetal.2023,
  author    = {Wendlandt, Tim and Koch, Claudia and Britz, Beate and Liedek, Anke and Schmidt, Nora and Werner, Stefan and Gleba, Yuri and Vahidpour, Farnoosh and Welden, Melanie and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Facile Purification and Use of Tobamoviral Nanocarriers for Antibody-Mediated Display of a Two-Enzyme System},
  series = {Viruses},
  volume    = {9},
  journal   = {Viruses},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1999-4915},
  doi       = {doi.org/10.3390/v15091951},
  pages     = {Artikel 1951},
  year      = {2023},
  abstract  = {Immunosorbent turnip vein clearing virus (TVCV) particles displaying the IgG-binding domains D and E of Staphylococcus aureus protein A (PA) on every coat protein (CP) subunit (TVCVPA) were purified from plants via optimized and new protocols. The latter used polyethylene glycol (PEG) raw precipitates, from which virions were selectively re-solubilized in reverse PEG concentration gradients. This procedure improved the integrity of both TVCVPA and the wild-type subgroup 3 tobamovirus. TVCVPA could be loaded with more than 500 IgGs per virion, which mediated the immunocapture of fluorescent dyes, GFP, and active enzymes. Bi-enzyme ensembles of cooperating glucose oxidase and horseradish peroxidase were tethered together on the TVCVPA carriers via a single antibody type, with one enzyme conjugated chemically to its Fc region, and the other one bound as a target, yielding synthetic multi-enzyme complexes. In microtiter plates, the TVCVPA-displayed sugar-sensing system possessed a considerably increased reusability upon repeated testing, compared to the IgG-bound enzyme pair in the absence of the virus. A high coverage of the viral adapters was also achieved on Ta2O5 sensor chip surfaces coated with a polyelectrolyte interlayer, as a prerequisite for durable TVCVPA-assisted electrochemical biosensing via modularly IgG-assembled sensor enzymes.},
  language  = {en}
}
@article{Staat1993,
  author    = {Staat, Manfred},
  title     = {Failure probabilities of the primary circuit pressure boundary of an HTR-Module for process heat generation under accident conditions for different failure modes},
  series = {Nuclear Engineering and Design. 144 (1993), H. 1},
  journal   = {Nuclear Engineering and Design. 144 (1993), H. 1},
  isbn      = {0029-5493},
  pages     = {53 -- 67},
  year      = {1993},
  language  = {en}
}
@article{LapitanRogatkinPersheyevetal.2018,
  author    = {Lapitan, Denis G. and Rogatkin, Dmitrii A. and Persheyev, Sydulla K. and Kotliar, Konstantin},
  title     = {False spectra formation in the differential two-channel scheme of the laser Doppler flowmeter},
  series = {Biomedizinische Technik},
  volume    = {63},
  journal   = {Biomedizinische Technik},
  number    = {4},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0013-5585},
  doi       = {10.1515/bmt-2017-0060},
  pages     = {439 -- 444},
  year      = {2018},
  abstract  = {Noise in the differential two-channel scheme of a classic laser Doppler flowmetry (LDF) instrument was studied. Formation of false spectral components in the output signal due to beating of electrical signals in the differential amplifier was found out. The improved block-diagram of the flowmeter was developed allowing to reduce the noise.},
  language  = {en}
}
@article{Damrau2000,
  author    = {Damrau, Karin},
  title     = {Fantastic Spatial Combinations in Film},
  series = {Architectural design : AD. 70 (2000), H. 1},
  journal   = {Architectural design : AD. 70 (2000), H. 1},
  isbn      = {0003-8504},
  pages     = {58 -- 61},
  year      = {2000},
  language  = {en}
}
@article{HelsperMoelterKaminski1989,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler},
  journal   = {1. Europ{\"a}isches Symposium Partikelabscheidung aus Gasen : [PARTEC, N{\"u}rnberg, West Germany, 19. - 21. April 1989 ; preprints] = 1. European Symposium Separation of Particles from Gases / [Organisation und Durchf{\"u}hrung: N{\"u}rnbergMesse]. Hrsg. von: Friedrich L{\"o}ffler},
  publisher = {N{\"u}rnbergMesse},
  address   = {N{\"u}rnberg},
  pages     = {441 -- 457},
  year      = {1989},
  language  = {en}
}
@article{HelsperMoelterKaminski1989,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast and Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1},
  journal   = {Proceedings of the Filtech Conference, Karlsruhe 1989, Vol. 1},
  publisher = {Filtration Society},
  address   = {Oadby},
  pages     = {125 -- 136},
  year      = {1989},
  language  = {en}
}
@article{HelsperMoelterWillemer1987,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Willemer, W.},
  title     = {Fast and Automated Testing of Filter Media / M{\"o}lter, W. ; Helsper, C. ; Willemer, W.},
  series = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.},
  journal   = {FILTECH Conference 1987 : Utrecht, Holland; September 23 - 25 1987 / org. by the Filtration Society , Vol. 1.},
  publisher = {Filtration Society},
  address   = {Loughborough},
  pages     = {106 -- 112},
  year      = {1987},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}
@article{OssmannHattrupBroeck2003,
  author    = {Oßmann, Martin and Hattrup, C. and Broeck, H. W. van der},
  title     = {Fast estimation techniques for digital control of resonant converters / Hattrup, C.; van der Broeck, H.W.; Ossmann, M.;},
  series = {IEEE Transaction on Power Electronics. 18 (2003), H. 1},
  journal   = {IEEE Transaction on Power Electronics. 18 (2003), H. 1},
  isbn      = {0885-8993},
  pages     = {365 -- 372},
  year      = {2003},
  language  = {en}
}
@article{EilmannBuchmannSiegwolfetal.2010,
  author    = {Eilmann, Britta and Buchmann, Nina and Siegwolf, Rolf and Saurer, Matthias and Cherubini, Paolo and Rigling, Andreas},
  title     = {Fast response of Scots pine to improved water availability reflected in tree-ring width and δ13C},
  series = {Plant, Cell and Environment},
  volume    = {33},
  journal   = {Plant, Cell and Environment},
  number    = {8},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1365-3040 (Online)},
  doi       = {10.1111/j.1365-3040.2010.02153.x},
  pages     = {1351 -- 1360},
  year      = {2010},
  abstract  = {Drought-induced forest decline, like the Scots pine mortality in inner-Alpine valleys, will gain in importance as the frequency and severity of drought events are expected to increase. To understand how chronic drought affects tree growth and tree-ring δ13C values, we studied mature Scots pine in an irrigation experiment in an inner-Alpine valley. Tree growth and isotope analyses were carried out at the annual and seasonal scale. At the seasonal scale, maximum δ13C values were measured after the hottest and driest period of the year, and were associated with decreasing growth rates. Inter-annual δ13C values in early- and latewood showed a strong correlation with annual climatic conditions and an immediate decrease as a response to irrigation. This indicates a tight coupling between wood formation and the freshly produced assimilates for trees exposed to chronic drought. This rapid appearance of the isotopic signal is a strong indication for an immediate and direct transfer of newly synthesized assimilates for biomass production. The fast appearance and the distinct isotopic signal suggest a low availability of old stored carbohydrates. If this was a sign for C-storage depletion, an increasing mortality could be expected when stressors increase the need for carbohydrate for defence, repair or regeneration.},
  language  = {en}
}
@article{HelsperMoelterKaminski1992,
  author    = {Helsper, Christoph and M{\"o}lter, W. and Kaminski, S.},
  title     = {Fast, Automated Testing of Different Air Filter Media / M{\"o}lter, W. ; Helsper, C. ; Kaminski, S.},
  series = {Filtration and Separation. 29 (1992), H. 1},
  journal   = {Filtration and Separation. 29 (1992), H. 1},
  isbn      = {0015-1882},
  pages     = {45 -- 50},
  year      = {1992},
  language  = {en}
}
@article{KallweitUchiyamaSiekmann1998,
  author    = {Kallweit, Stephan and Uchiyama, R. and Siekmann, H.},
  title     = {Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.},
  series = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  journal   = {International Journal of Rotating Machinery. 4 (1998), H. 1},
  isbn      = {1542-3034},
  pages     = {49 -- 59},
  year      = {1998},
  language  = {en}
}
@article{KilicRaatschenKoerfgenetal.2017,
  author    = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and K{\"o}rfgen, B. and Apaydin, N. M. and Astaneh-Asl, A.},
  title     = {FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements},
  series = {Arabian Journal for Science and Engineering},
  volume    = {42},
  journal   = {Arabian Journal for Science and Engineering},
  number    = {3},
  publisher = {Springer Nature},
  issn      = {2191-4281},
  doi       = {10.1007/s13369-016-2316-y},
  pages     = {1103 -- 1116},
  year      = {2017},
  abstract  = {This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 \% of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.},
  language  = {en}
}
@article{KrauseRodriguezStopicetal.2007,
  author    = {Krause, Gregor and Rodriguez, Jackson and Stopic, Srecko and Friedrich, Bernd},
  title     = {Feasibility assessment of electrocoagulation towards a new sustainable wastewater treatment / Rodriguez, Jackson ; Stopic, Srecko ; Krause Gregor ; Friedrich, Bernd},
  series = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  journal   = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  isbn      = {0944-1344},
  pages     = {477 -- 482},
  year      = {2007},
  language  = {en}
}
@article{ElMoussaouiTalbiAtmaneetal.2020,
  author    = {El Moussaoui, Noureddine and Talbi, Sofian and Atmane, Ilyas and Kassmi, Khalil and Schwarzer, Klemens and Chayeb, Hamid and Bachiri, Najib},
  title     = {Feasibility of a new design of a Parabolic Trough Solar Thermal Cooker (PSTC)},
  series = {Solar Energy},
  volume    = {201},
  journal   = {Solar Energy},
  number    = {Vol. 201 (May 2020)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X},
  doi       = {10.1016/j.solener.2020.03.079},
  pages     = {866 -- 871},
  year      = {2020},
  abstract  = {In this article, we describe the structure, the functioning, and the tests of parabolic trough solar thermal cooker (PSTC). This oven is designed to meet the needs of rural residents, including Urban, which requires stable cooking temperatures above 200 °C. The cooking by this cooker is based on the concentration of the sun's rays on a glass vacuum tube and heating of the oil circulate in a big tube, located inside the glass tube. Through two small tubes, associated with large tube, the heated oil, rise and heats the pot of cooking pot containing the food to be cooked (capacity of 5 kg). This cooker is designed in Germany and extensively tested in Morocco for use by the inhabitants who use wood from forests. During a sunny day, having a maximum solar radiation around 720 W/m2 and temperature ambient around 26 °C, maximum temperatures recorded of the small tube, the large tube and the center of the pot are respectively: 370 °C, 270 °C and 260 °C. The cooking process with food at high (fries, ..), we show that the cooking oil temperature rises to 200 °C, after 1 h of heating, the cooking is done at a temperature of 120 °C for 20 min. These temperatures are practically stable following variations and decreases in the intensity of irradiance during the day. The comparison of these results with those of the literature shows an improvement of 30-50 \% on the maximum value of the temperature with a heat storage that could reach 60 min of autonomy. All the results obtained show the good functioning of the PSTC and the feasibility of cooking food at high temperature (>200 °C).},
  language  = {en}
}
@article{LeimenaArtmannDachwaldetal.2010,
  author    = {Leimena, W. and Artmann, Gerhard and Dachwald, Bernd and Temiz Artmann, Ayseg{\"u}l and Gossmann, Matthias and Digel, Ilya},
  title     = {Feasibility of an in-situ microbial decontamination of an ice-melting probe},
  series = {Eurasian Chemico-Technological Journal. 12 (2010), H. 2},
  journal   = {Eurasian Chemico-Technological Journal. 12 (2010), H. 2},
  isbn      = {1562-3920},
  pages     = {145 -- 150},
  year      = {2010},
  language  = {en}
}
@article{FrauenrathHezelHeinrichsetal.2009,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Heinrichs, Uwe and Kozerke, Sebastian and Utting, Jane and Kob, Malte and Butenweg, Christoph and Boesiger, Peter and Niendorf, Thoralf},
  title     = {Feasibility of Cardiac Gating Free of Interference With Electro-Magnetic Fields at 1.5 Tesla, 3.0 Tesla and 7.0 Tesla Using an MR-Stethoscope},
  series = {Investigative Radiology},
  volume    = {44},
  journal   = {Investigative Radiology},
  number    = {9},
  publisher = {Lippincott Williams \& Wilkins ; (via Ovid)},
  address   = {Philadelphia, Pa},
  issn      = {1536-0210 (online)},
  doi       = {10.1097/RLI.0b013e3181b4c15e},
  pages     = {539 -- 547},
  year      = {2009},
  language  = {en}
}
@article{MaasVosLagemaatetal.2014,
  author    = {Maas, Marnix C. and Vos, Eline K. and Lagemaat, Miriam W. and Bitz, Andreas and Orzada, Stephan and Kobus, Thiele and Kraff, Oliver and Maderwald, Stefan and Ladd, Mark E. and Scheenen, Tom W. J.},
  title     = {Feasibility of T₂-weighted turbo spin echo imaging of the human prostate at 7 tesla},
  series = {Magnetic Resonance in Medicine},
  volume    = {71},
  journal   = {Magnetic Resonance in Medicine},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24818},
  pages     = {1711 -- 1719},
  year      = {2014},
  abstract  = {Purpose To demonstrate that high quality T₂-weighted (T2w) turbo spin-echo (TSE) imaging of the complete prostate can be achieved routinely and within safety limits at 7 T, using an external transceive body array coil only. Methods Nine healthy volunteers and 12 prostate cancer patients were scanned on a 7 T whole-body system. Preparation consisted of B₀ and radiofrequency shimming and localized flip angle calibration. T₁ and T₂ relaxation times were measured and used to define the T2w-TSE protocol. T2w imaging was performed using a TSE sequence (pulse repetition time/echo time 3000-3640/71 ms) with prolonged excitation and refocusing pulses to reduce specific absorption rate. Results High quality T2w TSE imaging was performed in less than 2 min in all subjects. Tumors of patients with gold-standard tumor localization (MR-guided biopsy or prostatectomy) were well visualized on 7 T imaging (n = 3). The number of consecutive slices achievable within a 10-g averaged specific absorption rate limit of 10 W/kg was ≥28 in all subjects, sufficient for full prostate coverage with 3-mm slices in at least one direction. Conclusion High quality T2w TSE prostate imaging can be performed routinely and within specific absorption rate limits at 7 T with an external transceive body array.},
  language  = {en}
}
@article{MuellerSeginWeigandetal.2022,
  author    = {Mueller, Tobias and Segin, Alexander and Weigand, Christoph and Schmitt, Robert H.},
  title     = {Feature selection for measurement models},
  series = {International journal of quality \& reliability management},
  journal   = {International journal of quality \& reliability management},
  number    = {Vol. ahead-of-print, No. ahead-of-print.},
  publisher = {Emerald Group Publishing Limited},
  address   = {Bingley},
  issn      = {0265-671X},
  doi       = {10.1108/IJQRM-07-2021-0245},
  year      = {2022},
  abstract  = {Purpose In the determination of the measurement uncertainty, the GUM procedure requires the building of a measurement model that establishes a functional relationship between the measurand and all influencing quantities. Since the effort of modelling as well as quantifying the measurement uncertainties depend on the number of influencing quantities considered, the aim of this study is to determine relevant influencing quantities and to remove irrelevant ones from the dataset. Design/methodology/approach In this work, it was investigated whether the effort of modelling for the determination of measurement uncertainty can be reduced by the use of feature selection (FS) methods. For this purpose, 9 different FS methods were tested on 16 artificial test datasets, whose properties (number of data points, number of features, complexity, features with low influence and redundant features) were varied via a design of experiments. Findings Based on a success metric, the stability, universality and complexity of the method, two FS methods could be identified that reliably identify relevant and irrelevant influencing quantities for a measurement model. Originality/value For the first time, FS methods were applied to datasets with properties of classical measurement processes. The simulation-based results serve as a basis for further research in the field of FS for measurement models. The identified algorithms will be applied to real measurement processes in the future.},
  language  = {en}
}
@article{ReisselTakeiBruneetal.1999,
  author    = {Reißel, Martin and Takei, T. and Brune, M. and K{\"o}ttgen, V.},
  title     = {FEM Based Durability Analysis of the Knuckle of a Passenger Car / Takei, T. ; Brune, M. ; K{\"o}ttgen, V. ; Reissel, M.},
  series = {Proceedings. JSAE Annual Congress (1999)},
  journal   = {Proceedings. JSAE Annual Congress (1999)},
  isbn      = {0919-1364},
  pages     = {17 -- 20},
  year      = {1999},
  language  = {en}
}
@article{TranTrinhDaoetal.2022,
  author    = {Tran, Ngoc Trinh and Trinh, Tu Luc and Dao, Ngoc Tien and Giap, Van Tan and Truong, Manh Khuyen and Dinh, Thuy Ha and Staat, Manfred},
  title     = {FEM shakedown analysis of structures under random strength with chance constrained programming},
  series = {Vietnam Journal of Mechanics},
  volume    = {44},
  journal   = {Vietnam Journal of Mechanics},
  number    = {4},
  publisher = {Vietnam Academy of Science and Technology (VAST)},
  issn      = {0866-7136},
  doi       = {10.15625/0866-7136/17943},
  pages     = {459 -- 473},
  year      = {2022},
  abstract  = {Direct methods, comprising limit and shakedown analysis, are a branch of computational mechanics. They play a significant role in mechanical and civil engineering design. The concept of direct methods aims to determine the ultimate load carrying capacity of structures beyond the elastic range. In practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and constraints. If strength and loading are random quantities, the shakedown analysis can be formulated as stochastic programming problem. In this paper, a method called chance constrained programming is presented, which is an effective method of stochastic programming to solve shakedown analysis problems under random conditions of strength. In this study, the loading is deterministic, and the strength is a normally or lognormally distributed variable.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2017,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Kremers, Alexander and Wagner, Torsten and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {FEM-based modeling of a calorimetric gas sensor for hydrogen peroxide monitoring},
  series = {physica status solidi a : applications and materials sciences},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201600912},
  year      = {2017},
  abstract  = {A physically coupled finite element method (FEM) model is developed to study the response behavior of a calorimetric gas sensor. The modeled sensor serves as a monitoring device of the concentration of gaseous hydrogen peroxide (H2 O2) in a high temperature mixture stream in aseptic sterilization processes. The principle of operation of a calorimetric H2 O2 sensor is analyzed and the results of the numerical model have been validated by using previously published sensor experiments. The deviation in the results between the FEM model and experimental data are presented and discussed.},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@article{StaatHeitzer1999,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {FEM-computation of load carrying capacity of highly loaded passive components by direct methods. Heitzer, M. ; Staat, M.},
  series = {Nuclear Engineering and Design. 193 (1999), H. 3},
  journal   = {Nuclear Engineering and Design. 193 (1999), H. 3},
  isbn      = {0029-5493},
  pages     = {349 -- 358},
  year      = {1999},
  language  = {en}
}