@article{KraftHeerRetkowitz2008,
  author    = {Kraft, Bodo and Heer, Thomas and Retkowitz, Daniel},
  title     = {Incremental Ontology Integration / Heer, Thomas ; Retkowitz, Daniel ; Kraft, Bodo},
  series = {Proceedings of the 10th International Conference on Enterprise Information Systems : Barcelona, Spain, June 12 - 16, 2008 / organized by INSTICC, Institute for Systems and Technologies of Information, Control and Communication ... [Ed. by Jos{\´e} Cordeiro ...]},
  journal   = {Proceedings of the 10th International Conference on Enterprise Information Systems : Barcelona, Spain, June 12 - 16, 2008 / organized by INSTICC, Institute for Systems and Technologies of Information, Control and Communication ... [Ed. by Jos{\´e} Cordeiro ...]},
  publisher = {INSTICC},
  address   = {Setubal},
  pages     = {13 -- 28},
  year      = {2008},
  language  = {en}
}
@article{HenriquesJuradoGrieseretal.2020,
  author    = {Henriques, A. and Jurado, B. and Grieser, M. and Denis-Petit, D. and Chiron, T. and Gaudefroy, L. and Glorius, J. and Langer, Christoph and Litvinov, Yu. A. and Mathieu, L. and Meot, V. and Perez-Sanchez, R. and Pibernat, J. and Reifarth, R. and Roig, O. and Thomas, B. and Thomas, B. A. and Thomas, J. C. and Tsekhanovich, I.},
  title     = {Indirect measurements of neutron cross-secti at heavy-ion storage rings},
  series = {Journal of Physics: Conference Series},
  volume    = {1668},
  journal   = {Journal of Physics: Conference Series},
  number    = {Art. 012019},
  publisher = {IOP},
  address   = {Bristol},
  doi       = {10.1088/1742-6596/1668/1/012019},
  year      = {2020},
  abstract  = {Cross sections for neutron-induced reactions of short-lived nuclei are essential for nuclear astrophysics since these reactions in the stars are responsible for the production of most heavy elements in the universe. These reactions are also key in applied domains like energy production and medicine. Nevertheless, neutron-induced cross-section measurements can be extremely challenging or even impossible to perform due to the radioactivity of the targets involved. Indirect measurements through the surrogate-reaction method can help to overcome these difficulties. The surrogate-reaction method relies on the use of an alternative reaction that will lead to the formation of the same excited nucleus as in the neutron-induced reaction of interest. The decay probabilities (for fission, neutron and gamma-ray emission) of the nucleus produced via the surrogate reaction allow one to constrain models and the prediction of the desired neutron cross sections. We propose to perform surrogate reaction measurements in inverse kinematics at heavy-ion storage rings, in particular at the CRYRING@ESR of the GSI/FAIR facility. We present the conceptual idea of the most promising setup to measure for the first time simultaneously the fission, neutron and gamma-ray emission probabilities. The results of the first simulations considering the 238U(d,d') reaction are shown, as well as new technical developments that are being carried out towards this set-up.},
  language  = {en}
}
@article{KernHeidlerZischank1998,
  author    = {Kern, Alexander and Heidler, F. and Zischank, W.},
  title     = {Induced overvoltages in cable ducts taking into account the current flow into earth / F. Heidler ; W. Zischank ... A. Kern ...},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@article{HeroldBrandtSeibleretal.2008,
  author    = {Herold, Marco J. and Brandt, Jens van den and Seibler, Jost and Reichardt, Holger M.},
  title     = {Inducible and reversible gene silencing by stable integration of an shRNA-encoding lentivirus in transgenic rats},
  series = {Proceedings of the National Academy of Sciences of the United States of America},
  volume    = {105},
  journal   = {Proceedings of the National Academy of Sciences of the United States of America},
  number    = {47},
  issn      = {1091-6490},
  doi       = {10.1073/pnas.0806213105},
  pages     = {18507 -- 18512},
  year      = {2008},
  language  = {en}
}
@article{KotnikPopovaTodirasetal.2009,
  author    = {Kotnik, Katarina and Popova, Elena and Todiras, Mihail and Mori, Marcelo A. and Alenina, Natalia and Seibler, Jost and Bader, Michael},
  title     = {Inducible transgenic rat model for diabetes mellitus based on shRNA-mediated gene knockdown},
  series = {Plos One},
  volume    = {4},
  journal   = {Plos One},
  number    = {4},
  publisher = {Plos},
  address   = {San Francisco, California, US},
  doi       = {10.1371/journal.pone.0005124},
  pages     = {e5124},
  year      = {2009},
  language  = {en}
}
@article{NguyenDuongTranetal.2012,
  author    = {Nguyen, Nhu Huynh and Duong, Minh Tuan and Tran, Thanh Ngoc and Pham, Phu Tinh and Grottke, O. and Tolba, R. and Staat, Manfred},
  title     = {Influence of a freeze-thaw cycle on the stress-stretch curves of tissues of porcine abdominal organs},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {14},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.008},
  pages     = {2382 -- 2386},
  year      = {2012},
  abstract  = {The paper investigates both fresh porcine spleen and liver and the possible decomposition of these organs under a freeze-thaw cycle. The effect of tissue preservation condition is an important factor which should be taken into account for protracted biomechanical tests. In this work, tension tests were conducted for a large number of tissue specimens from twenty pigs divided into two groups of 10. Concretely, the first group was tested in fresh state; the other one was tested after a freeze-thaw cycle which simulates the conservation conditions before biomechanical experiments. A modified Fung model for isotropic behavior was adopted for the curve fitting of each kind of tissues. Experimental results show strong effects of the realistic freeze-thaw cycle on the capsule of elastin-rich spleen but negligible effects on the liver which virtually contains no elastin. This different behavior could be explained by the autolysis of elastin by elastolytic enzymes during the warmer period after thawing. Realistic biomechanical properties of elastin-rich organs can only be expected if really fresh tissue is tested. The observations are supported by tests of intestines.},
  language  = {en}
}
@article{KuhnhenneRegerPyschnyetal.2020,
  author    = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd},
  title     = {Influence of airtightness of steel sandwich panel joints on heat losses},
  series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  volume    = {172},
  journal   = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  number    = {Art. 05008},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  doi       = {10.1051/e3sconf/202017205008},
  pages     = {6},
  year      = {2020},
  abstract  = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.},
  language  = {en}
}
@article{JanusAchtsnichtTempeletal.2023,
  author    = {Janus, Kevin Alexander and Achtsnicht, Stefan and Tempel, Laura and Drinic, Aleksaner and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Influence of fibroin membrane composition and curing parameters on the performance of a biodegradable enzymatic biosensor manufactured from Silicon-Free Carbon},
  series = {Physica status solidi : pss. A, Applications and materials science},
  volume    = {220},
  journal   = {Physica status solidi : pss. A, Applications and materials science},
  number    = {22},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300 (Print)},
  doi       = {10.1002/pssa.202300081},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {Herein, fibroin, polylactide (PLA), and carbon are investigated for their suitability as biocompatible and biodegradable materials for amperometric biosensors. For this purpose, screen-printed carbon electrodes on the biodegradable substrates fibroin and PLA are modified with a glucose oxidase membrane and then encapsulated with the biocompatible material Ecoflex. The influence of different curing parameters of the carbon electrodes on the resulting biosensor characteristics is studied. The morphology of the electrodes is investigated by scanning electron microscopy, and the biosensor performance is examined by amperometric measurements of glucose (0.5-10 mM) in phosphate buffer solution, pH 7.4, at an applied potential of 1.2 V versus a Ag/AgCl reference electrode. Instead of Ecoflex, fibroin, PLA, and wound adhesive are tested as alternative encapsulation compounds: a series of swelling tests with different fibroin compositions, PLA, and Ecoflex has been performed before characterizing the most promising candidates by chronoamperometry. Therefore, the carbon electrodes are completely covered with the particular encapsulation material. Chronoamperometric measurements with H2O2 concentrations between 0.5 and 10 mM enable studying the leakage current behavior.},
  language  = {en}
}
@article{PaulssenLeLengkeeketal.2013,
  author    = {Paulßen, Elisabeth and Le, Van So and Lengkeek, Nigel and Pellegrini, Paul and Jackson, Tim and Greguric, Ivan and Weiner, Ron},
  title     = {Influence of Metal Ions on the 68Ga-labeling of DOTATATE},
  series = {Applied Radiation and Isotopes},
  volume    = {82},
  journal   = {Applied Radiation and Isotopes},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9800},
  doi       = {10.1016/j.apradiso.2013.08.010},
  pages     = {232 -- 238},
  year      = {2013},
  language  = {en}
}
@article{ArtmannSchmidSchoenbeinSchroederetal.1988,
  author    = {Artmann, Gerhard and Schmid-Sch{\"o}nbein, H. and Schr{\"o}der, Susanne and Grebe, R. [u.a.]},
  title     = {Influence of Moxaverine-HCL on Membrane Curvature and Microsieve Filterability of Red Cells after Exposure to Hyperosmolarity and Lactacidosis. Schmid-Sch{\"o}nbein, H.; Schr{\"o}der, Susanne; Grebe, R.; Artmann, Gerhard Michael, Eschweiler, H; Teitel, P.},
  series = {Arzneimittelforschung. 38 (1988), H. 5},
  journal   = {Arzneimittelforschung. 38 (1988), H. 5},
  isbn      = {0004-4172},
  pages     = {710 -- 716},
  year      = {1988},
  language  = {en}
}
@article{BullerschenWilhelmiWimmer1985,
  author    = {Bullerschen, Klaus-Gerd and Wilhelmi, Herbert and Wimmer, W.},
  title     = {Influence of non-uniform material properties and water cooling on current density and temperature profiles in arc furnace elektrodes},
  series = {Steel Research. 56 (1985), H. 11},
  journal   = {Steel Research. 56 (1985), H. 11},
  isbn      = {0177-4832},
  pages     = {559 -- 564},
  year      = {1985},
  language  = {en}
}
@article{HavermannKainumaTakayama2005,
  author    = {Havermann, Marc and Kainuma, M. and Takayama, K.},
  title     = {Influence of Physical and Geometrical Parameters on Vortex Rings Generated by a Shock Tube / Havermann, M. ; Kainuma, M. ; Takayama, K.},
  series = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  journal   = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  publisher = {ICT},
  address   = {Pfinztal},
  pages     = {getr. Z{\"a}hlung [ca. 600 S.]},
  year      = {2005},
  language  = {en}
}
@article{DuongNguyenTranetal.2015,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Tran, Thanh Ngoc and Tolba, R. H. and Staat, Manfred},
  title     = {Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen},
  series = {International biomechanics},
  volume    = {Vol. 2},
  journal   = {International biomechanics},
  number    = {Iss. 1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2333-5432},
  doi       = {10.1080/23335432.2015.1049295},
  pages     = {79 -- 88},
  year      = {2015},
  language  = {en}
}
@article{LenzKahmannBehbahanietal.2022,
  author    = {Lenz, Maximilian and Kahmann, Stephanie Lucina and Behbahani, Mehdi and Pennig, Lenhard and Hackl, Michael and Leschinger, Tim and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {Influence of rotator cuff preload on fracture configuration in proximal humerus fractures: a proof of concept for fracture simulation},
  series = {Archives of Orthopaedic and Trauma Surgery},
  journal   = {Archives of Orthopaedic and Trauma Surgery},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1434-3916},
  doi       = {10.1007/s00402-022-04471-9},
  year      = {2022},
  abstract  = {Introduction In regard of surgical training, the reproducible simulation of life-like proximal humerus fractures in human cadaveric specimens is desirable. The aim of the present study was to develop a technique that allows simulation of realistic proximal humerus fractures and to analyse the influence of rotator cuff preload on the generated lesions in regards of fracture configuration. Materials and methods Ten cadaveric specimens (6 left, 4 right) were fractured using a custom-made drop-test bench, in two groups. Five specimens were fractured without rotator cuff preload, while the other five were fractured with the tendons of the rotator cuff preloaded with 2 kg each. The humeral shaft and the shortened scapula were potted. The humerus was positioned at 90° of abduction and 10° of internal rotation to simulate a fall on the elevated arm. In two specimens of each group, the emergence of the fractures was documented with high-speed video imaging. Pre-fracture radiographs were taken to evaluate the deltoid-tuberosity index as a measure of bone density. Post-fracture X-rays and CT scans were performed to define the exact fracture configurations. Neer's classification was used to analyse the fractures. Results In all ten cadaveric specimens life-like proximal humerus fractures were achieved. Two III-part and three IV-part fractures resulted in each group. The preloading of the rotator cuff muscles had no further influence on the fracture configuration. High-speed videos of the fracture simulation revealed identical fracture mechanisms for both groups. We observed a two-step fracture mechanism, with initial impaction of the head segment against the glenoid followed by fracturing of the head and the tuberosities and then with further impaction of the shaft against the acromion, which lead to separation of the tuberosities. Conclusion A high energetic axial impulse can reliably induce realistic proximal humerus fractures in cadaveric specimens. The preload of the rotator cuff muscles had no influence on initial fracture configuration. Therefore, fracture simulation in the proximal humerus is less elaborate. Using the presented technique, pre-fractured specimens are available for real-life surgical education.},
  language  = {en}
}
@article{ŠakićMarinkovićButenwegetal.2023,
  author    = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls},
  series = {Engineering Structures},
  volume    = {276},
  journal   = {Engineering Structures},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.115342},
  year      = {2023},
  abstract  = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.},
  language  = {en}
}
@article{BertzSchoeningMolinnusetal.2024,
  author    = {Bertz, Morten and Sch{\"o}ning, Michael Josef and Molinnus, Denise and Homma, Takayuki},
  title     = {Influence of temperature, light, and H₂O₂ concentration on microbial spore inactivation: in-situ Raman spectroscopy combined with optical trapping},
  series = {Physica status solidi (a) applications and materials science},
  journal   = {Physica status solidi (a) applications and materials science},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6319 (Online)},
  doi       = {10.1002/pssa.202300866},
  pages     = {8 Seiten},
  year      = {2024},
  abstract  = {To gain insight on chemical sterilization processes, the influence of temperature (up to 70 °C), intense green light, and hydrogen peroxide (H₂O₂) concentration (up to 30\% in aqueous solution) on microbial spore inactivation is evaluated by in-situ Raman spectroscopy with an optical trap. Bacillus atrophaeus is utilized as a model organism. Individual spores are isolated and their chemical makeup is monitored under dynamically changing conditions (temperature, light, and H₂O₂ concentration) to mimic industrially relevant process parameters for sterilization in the field of aseptic food processing. While isolated spores in water are highly stable, even at elevated temperatures of 70 °C, exposure to H₂O₂ leads to a loss of spore integrity characterized by the release of the key spore biomarker dipicolinic acid (DPA) in a concentration-dependent manner, which indicates damage to the inner membrane of the spore. Intensive light or heat, both of which accelerate the decomposition of H₂O₂ into reactive oxygen species (ROS), drastically shorten the spore lifetime, suggesting the formation of ROS as a rate-limiting step during sterilization. It is concluded that Raman spectroscopy can deliver mechanistic insight into the mode of action of H₂O₂-based sterilization and reveal the individual contributions of different sterilization methods acting in tandem.},
  language  = {en}
}
@article{KoppSchunckGosauetal.2020,
  author    = {Kopp, Alexander and Schunck, Laura and Gosau, Martin and Smeets, Ralf and Burg, Simon and Fuest, Sandra and Kr{\"o}ger, Nadja and Zinser, Max and Krohn, Sebastian and Behbahani, Mehdi and K{\"o}pf, Marius and Lauts, Lisa and Rutkowski, Rico},
  title     = {Influence of the casting concentration on the mechanical and optical properties of Fa/CaCl2-derived silk fibroin membranes},
  series = {International Journal of Molecular Sciences},
  volume    = {21},
  journal   = {International Journal of Molecular Sciences},
  number    = {18 art. no. 6704},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1422-0067},
  doi       = {10.3390/ijms21186704},
  year      = {2020},
  abstract  = {In this study, we describe the manufacturing and characterization of silk fibroin membranes derived from the silkworm Bombyx mori. To date, the dissolution process used in this study has only been researched to a limited extent, although it entails various potential advantages, such as reduced expenses and the absence of toxic chemicals in comparison to other conventional techniques. Therefore, the aim of this study was to determine the influence of different fibroin concentrations on the process output and resulting membrane properties. Casted membranes were thus characterized with regard to their mechanical, structural and optical assets via tensile testing, SEM, light microscopy and spectrophotometry. Cytotoxicity was evaluated using BrdU, XTT, and LDH assays, followed by live-dead staining. The formic acid (FA) dissolution method was proven to be suitable for the manufacturing of transparent and mechanically stable membranes. The fibroin concentration affects both thickness and transparency of the membranes. The membranes did not exhibit any signs of cytotoxicity. When compared to other current scientific and technical benchmarks, the manufactured membranes displayed promising potential for various biomedical applications. Further research is nevertheless necessary to improve reproducible manufacturing, including a more uniform thickness, less impurity and physiological pH within the membranes.},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Influence of the gas phase on diamond deposition and diamond properties. Bachmann, P. K.; Hagemann, H.J.; Lade, H.; Leers, D.; Picht, F.; Wiechert, D. U.},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  publisher = {International Communications Specialists, Inc.},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{AlbrachtArampatzis2006,
  author    = {Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Influence of the mechanical properties of the muscle-tendon unit on force generation in runners with different running economy},
  series = {Biological Cybernetics},
  volume    = {95},
  journal   = {Biological Cybernetics},
  number    = {1},
  issn      = {1432-0770},
  doi       = {10.1007/s00422-006-0070-z},
  pages     = {87 -- 96},
  year      = {2006},
  language  = {en}
}
@article{Hoepner2004,
  author    = {Hoepner, Gert},
  title     = {Info-Web-Generation},
  series = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4},
  journal   = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4},
  isbn      = {1573-3181},
  pages     = {14 -- 20},
  year      = {2004},
  language  = {en}
}
@article{Ritz2000,
  author    = {Ritz, Thomas},
  title     = {Information Channels},
  series = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  journal   = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  pages     = {15 -- 15},
  year      = {2000},
  language  = {en}
}
@article{StulpeSinger1990,
  author    = {Stulpe, Werner and Singer, Matthias},
  title     = {Informational Incompleteness of the Observables Sx,Sy,Sz for Spin-1 Systems. Singer, Matthias; Stulpe, W.},
  series = {Foundations of Physics. 20 (1990), H. 4},
  journal   = {Foundations of Physics. 20 (1990), H. 4},
  isbn      = {1572-9516},
  pages     = {471 -- 472},
  year      = {1990},
  language  = {en}
}
@article{ArtmannZhouStacheBuettneretal.2002,
  author    = {Artmann, Gerhard and Zhou-Stache, J. and Buettner, R. and Mittermayer, C. [u.a.]},
  title     = {Inhibition of TNF-alpha induced cell death in HUVEC and Jurkat cells by protocatechuic acid. Zhou-Stache, J.; Buettner, R.; Artmann, Gerhard Michael; Mittermayer, C.; Bosserhoff, A. K.},
  series = {Medical and Biological Engineering and Computing. 40 (2002), H. 6},
  journal   = {Medical and Biological Engineering and Computing. 40 (2002), H. 6},
  isbn      = {0140-0118},
  pages     = {698 -- 703},
  year      = {2002},
  language  = {en}
}
@article{FingerBilBraun2019,
  author    = {Finger, Felix and Bil, Cees and Braun, Carsten},
  title     = {Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft},
  series = {Journal of Aircraft},
  volume    = {57},
  journal   = {Journal of Aircraft},
  number    = {2},
  issn      = {1533-3868},
  doi       = {10.2514/1.C035428},
  pages     = {245 -- 255},
  year      = {2019},
  language  = {en}
}
@article{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Initial stage of two-dimensional dam-break waves: laboratory versus VOF},
  series = {Journal of hydraulic research},
  volume    = {50},
  journal   = {Journal of hydraulic research},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  doi       = {10.1080/00221686.2011.639981},
  pages     = {89 -- 97},
  year      = {2012},
  abstract  = {Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.},
  language  = {en}
}
@article{HamadBilattoAdlyetal.2016,
  author    = {Hamad, E. M. and Bilatto, S. E. R. and Adly, N. Y. and Correa, D. S. and Wolfrum, B. and Sch{\"o}ning, Michael Josef and Offenh{\"a}usser, A. and Yakushenko, A.},
  title     = {Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices},
  series = {Lab on a Chip},
  volume    = {16},
  journal   = {Lab on a Chip},
  number    = {1},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1473-0189},
  doi       = {10.1039/C5LC01195G},
  pages     = {70 -- 74},
  year      = {2016},
  abstract  = {Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.},
  language  = {en}
}
@article{EngelsKrauskopf2011,
  author    = {Engels, Elmar and Krauskopf, S.},
  title     = {Innovation in Motion-Logic programming - a versatile interface},
  series = {Proceedings to the 12th International Workshop on Research and Education in Mechatronics, REM 2011, Kocaeli, Turkey, 15.09.-16.09.2011},
  journal   = {Proceedings to the 12th International Workshop on Research and Education in Mechatronics, REM 2011, Kocaeli, Turkey, 15.09.-16.09.2011},
  publisher = {-},
  isbn      = {978-975-8047-96-3},
  year      = {2011},
  language  = {en}
}
@article{Janz2001,
  author    = {Janz, Norbert},
  title     = {Innovations in Germany: Market Novelties Gain Greater Importance},
  series = {ZEW news. English edition (2001)},
  journal   = {ZEW news. English edition (2001)},
  pages     = {3 -- 3},
  year      = {2001},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{Janz2002,
  author    = {Janz, Norbert},
  title     = {Innovative Power of German Manufacturing Industry Slows Down},
  series = {ZEW news. English edition. 4 (2002), H. 2002},
  journal   = {ZEW news. English edition. 4 (2002), H. 2002},
  pages     = {5 -- 5},
  year      = {2002},
  language  = {en}
}
@article{ElBerguiAbouabdillahBouriougetal.2023,
  author    = {El Bergui, Omnia and Abouabdillah, Aziz and Bourioug, Mohamed and Schmitz, Dominik and Biel, Markus and Aboudrare, Abdellah and Krauss, Manuel and Jomaa, Ahlem and Romuli, Sebastian and M{\"u}ller, Joachim and Fagroud, Mustapha and Bouabid, Rachid},
  title     = {Innovative solutions for drought: Evaluating hydrogel application on onion cultivation (Allium cepa) in Morocco},
  series = {Water},
  volume    = {15},
  journal   = {Water},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/w15111972},
  pages     = {Artikel 1972},
  year      = {2023},
  abstract  = {Throughout the last decade, and particularly in 2022, water scarcity has become a critical concern in Morocco and other Mediterranean countries. The lack of rainfall during spring was worsened by a succession of heat waves during the summer. To address this drought, innovative solutions, including the use of new technologies such as hydrogels, will be essential to transform agriculture. This paper presents the findings of a study that evaluated the impact of hydrogel application on onion (Allium cepa) cultivation in Meknes, Morocco. The treatments investigated in this study comprised two different types of hydrogel-based soil additives (Arbovit® polyacrylate and Huminsorb® polyacrylate), applied at two rates (30 and 20 kg/ha), and irrigated at two levels of water supply (100\% and 50\% of daily crop evapotranspiration; ETc). Two control treatments were included, without hydrogel application and with both water amounts. The experiment was conducted in an open field using a completely randomized design. The results indicated a significant impact of both hydrogel-type dose and water dose on onion plant growth, as evidenced by various vegetation parameters. Among the hydrogels tested, Huminsorb® Polyacrylate produced the most favorable outcomes, with treatment T9 (100\%, HP, 30 kg/ha) yielding 70.55 t/ha; this represented an increase of 11 t/ha as compared to the 100\% ETc treatment without hydrogel application. Moreover, the combination of hydrogel application with 50\% ETc water stress showed promising results, with treatment T4 (HP, 30 kg, 50\%) producing almost the same yield as the 100\% ETc treatment without hydrogel while saving 208 mm of water.},
  language  = {en}
}
@article{SchoeningSchubertKloocketal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Schubert, J and Kloock, Joachim P. and Zander, W. and Mourzina, Y. G. and Legin, A. and Vlasov, Y. G. and L{\"u}th, H.},
  title     = {Innovative thin film techniques for microfabricating electrochemical sensors},
  series = {Lecture Notes of the ICB Seminars},
  journal   = {Lecture Notes of the ICB Seminars},
  publisher = {MCB},
  address   = {Warsaw},
  pages     = {55 -- 66},
  year      = {2002},
  language  = {en}
}
@article{SchoeningSchubertKloocketal.2001,
  author    = {Sch{\"o}ning, Michael Josef and Schubert, Joachim P. and Kloock, Joachim P. and Zander, W. and Mourzina, Y. G. and Legin, A. and Vlasov, Y. G. and L{\"u}th, H.},
  title     = {Innovative thin film techniques for microfabricating electrochemical sensors},
  series = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 4},
  journal   = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 4},
  isbn      = {0208-5216},
  pages     = {107 -- 119},
  year      = {2001},
  language  = {en}
}
@article{KloockMourzinaErmolenkoetal.2004,
  author    = {Kloock, Joachim P. and Mourzina, Y.G. and Ermolenko, Y. and Doll, T. and Schubert, J. and Sch{\"o}ning, Michael Josef},
  title     = {Inorganic thin-film sensor membranes with PLD-prepared chalcogenide glasses: Challenges and implementation},
  series = {Sensors. 4 (2004), H. 10},
  journal   = {Sensors. 4 (2004), H. 10},
  isbn      = {1424-8220},
  pages     = {156 -- 162},
  year      = {2004},
  language  = {en}
}
@article{SchoeningSchrothLuethetal.2001,
  author    = {Sch{\"o}ning, Michael Josef and Schroth, Peter and L{\"u}th, Hans and Hummel, Hans E. and Sch{\"u}tz, Stefan},
  title     = {Insect chemoreceptors coupled to silicon transistors as innovative biosensors},
  series = {Proceedings of SPIE. 4205 (2001)},
  journal   = {Proceedings of SPIE. 4205 (2001)},
  pages     = {152 -- 162},
  year      = {2001},
  language  = {en}
}
@article{SchuetzCzynskiHummeletal.2000,
  author    = {Sch{\"u}tz, S. and Czynski, J. and Hummel, Hans E. and Sch{\"o}ning, Michael Josef and Schroth, P. and Kordos, P. and L{\"u}th, H.},
  title     = {Insect meets microelectronics: A BioFET as a first step to bioelectronic microsystems},
  series = {Transducers '99 : proceedings of the Tenth International Conference on Solid-State Sensors and Actuators ; 7 - 10 June, 1999, Sendai, Japan / ed.: S. Middelhoek},
  journal   = {Transducers '99 : proceedings of the Tenth International Conference on Solid-State Sensors and Actuators ; 7 - 10 June, 1999, Sendai, Japan / ed.: S. Middelhoek},
  publisher = {Elsevier},
  address   = {Amsterdam [u.a.]},
  pages     = {1104 -- 1107},
  year      = {2000},
  language  = {en}
}
@article{SchrothSchoeningKordosetal.1999,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and Kordos, P. and L{\"u}th, H. and Sch{\"u}tz, S. and Weißbecker, B. and Hummel, Hans E.},
  title     = {Insectbased BioFETs with improved signal characteristics},
  series = {Biosensors \& Bioelectronics. 14 (1999), H. 3},
  journal   = {Biosensors \& Bioelectronics. 14 (1999), H. 3},
  issn      = {0956-5663},
  pages     = {303 -- 308},
  year      = {1999},
  language  = {en}
}
@article{SponagelAkbayBecker1985,
  author    = {Sponagel, Stefan and Akbay, U. and Becker, E.},
  title     = {Instability of plane Couette flow of viscoelastic liquids},
  series = {Journal of non-Newtonian fluid mechanics. 18 (1985), H. 2},
  journal   = {Journal of non-Newtonian fluid mechanics. 18 (1985), H. 2},
  isbn      = {0377-0257},
  pages     = {123 -- 141},
  year      = {1985},
  language  = {en}
}
@article{SponagelAkbayBeckeretal.1980,
  author    = {Sponagel, Stefan and Akbay, U. and Becker, E. and Krozer, S.},
  title     = {Instability of slow viscometric flow},
  series = {Mechanics Research Communications. 7 (1980), H. 4},
  journal   = {Mechanics Research Communications. 7 (1980), H. 4},
  isbn      = {0093-6413},
  pages     = {199 -- 204},
  year      = {1980},
  language  = {en}
}
@article{BiselliThoemmesGarskeetal.1992,
  author    = {Biselli, Manfred and Th{\"o}mmes, J. and Garske, U. and Wandrey, Christian},
  title     = {Integrated detoxification: Reduction of ammonium concentration by dialysis with cation exchange membranes / Th{\"o}mmes, J. ; Garske, U. ; Biselli, M. ; Wandrey, C.},
  series = {Animal cell technology : developments, processes, and products ; ESACT, European Society for Animal Cell Technology, the 11th meeting / Ed. R. E. Spier},
  journal   = {Animal cell technology : developments, processes, and products ; ESACT, European Society for Animal Cell Technology, the 11th meeting / Ed. R. E. Spier},
  publisher = {Butterworth-Heinemann},
  address   = {Oxford},
  isbn      = {0750604212},
  pages     = {171 -- 175},
  year      = {1992},
  language  = {en}
}
@article{BienerBoykenSasse1997,
  author    = {Biener, Ernst and Boyken, P. and Sasse, T.},
  title     = {Integrated dredged material management system of Bremen-Seehausen},
  series = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  journal   = {Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {497 -- 502},
  year      = {1997},
  language  = {en}
}
@article{RolkaPoghossianSchoening2004,
  author    = {Rolka, David and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Integration of a capacitive EIS sensor into a FIA system for pH and penicillin determination},
  series = {Sensors. 4 (2004)},
  journal   = {Sensors. 4 (2004)},
  isbn      = {1424-8220},
  pages     = {84 -- 94},
  year      = {2004},
  language  = {en}
}
@article{PoghossianMalzahnAbouzaretal.2011,
  author    = {Poghossian, Arshak and Malzahn, K. and Abouzar, Maryam H. and Mehndiratta, P. and Katz, E. and Sch{\"o}ning, Michael Josef},
  title     = {Integration of biomolecular logic gates with field-effect transducers},
  series = {Electrochimica Acta. 56 (2011), H. 26},
  journal   = {Electrochimica Acta. 56 (2011), H. 26},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0013-4686},
  pages     = {9661 -- 9665},
  year      = {2011},
  language  = {en}
}
@article{SchmitzBartzHilgeretal.1990,
  author    = {Schmitz, G{\"u}nter and Bartz, R. and Hilger, U. and Siedentop, M.},
  title     = {Intelligent Alcohol Fuel Sensor},
  year      = {1990},
  language  = {en}
}
@article{SchaeferMende1989,
  author    = {Sch{\"a}fer, Horst and Mende, H. H.},
  title     = {Interaction between laminated g.o.3\% SiFe sheets due to gap-stray fields and edge peaks},
  series = {Physica Scripta. 39 (1989), H. 3},
  journal   = {Physica Scripta. 39 (1989), H. 3},
  isbn      = {0031-8949},
  pages     = {397 -- 400},
  year      = {1989},
  language  = {en}
}
@article{HelsperDreilingHalleretal.1986,
  author    = {Helsper, Christoph and Dreiling, V. and Haller, P. and Kaminski, U.},
  title     = {Intercomparison of Eleven Condensation Nucleus Counters / Dreiling, V. ; Haller, P. ; Helsper, C.; Kaminski, U. ; Plomp, A. ; Raes, F. ; Roth, C. ; Schier, J. ; Sch{\"u}rmann, G.},
  series = {Journal of Aerosol Science. 17 (1986), H. 3},
  journal   = {Journal of Aerosol Science. 17 (1986), H. 3},
  isbn      = {0021-8502},
  pages     = {565 -- 570},
  year      = {1986},
  language  = {en}
}
@article{HelsperHornSchneideretal.2008,
  author    = {Helsper, Christoph and Horn, Hans-Georg and Schneider, Friedhelm and Wehner, Birgit},
  title     = {Intercomparison of five mobility size spectrometers for measuring atmospheric submicrometer aerosol particles / Helsper, Christoph ; Horn, Hans-Georg ; Schneider, Friedhelm ; Wehner, Birgit ; Wiedensohler, Alfred},
  series = {Gefahrstoffe, Reinhaltung der Luft. Air Quality Control. 68 (2008), H. 11-12},
  journal   = {Gefahrstoffe, Reinhaltung der Luft. Air Quality Control. 68 (2008), H. 11-12},
  isbn      = {0949-8036},
  pages     = {475 -- 481},
  year      = {2008},
  language  = {en}
}
@article{SchubaSpaniol1999,
  author    = {Schuba, Marko and Spaniol, Otto},
  title     = {Interconnection of Local Area Networks via ATM / Spaniol, Otto ; Schuba, Marko},
  series = {High performance networks for multimedia applications / edited by Andr{\´e} Danthine ...},
  journal   = {High performance networks for multimedia applications / edited by Andr{\´e} Danthine ...},
  publisher = {Kluwer Academic Publ.},
  address   = {Dordrecht},
  isbn      = {0-7923-8274-9},
  pages     = {1 -- 10},
  year      = {1999},
  language  = {en}
}